MARKETline products Ltd by Cembre S.p.A.

Certified Quality Management System

Certified Enviromental Management System

Certified Occupational Health & Safety Management System

HEAT-SHRINKABLE TUBING CABLE TIES & ACCESSORIES CABLE & CONDUIT CLIPS CABLE PREPARATION TOOLS HAND TOOLS

For every professional, using quality products for each job is essential; Cembre, always attentive to the needs of the electrical sector, presents MARKETline - a single source portfolio of supplementary products for the commercial and industrial installer.

HEAT-SHRINKABLE TUBING

TERMOSTRIP TSS series, flame-retardant Polyolefin shrinkage ratio 2÷1 Main Features Heat-shrinkable Polyolefin tubing strip for general use; is environmentally neutral, flexible, non-flammable and offers fast heat shrinkage and stable performance. Main uses include insulation and protection of electrical conductors, connectors and terminations; protection of metal tubes from corrosion; protection of antennae and various identification applications. • Colours: Black, Red, White, Blue, Transparent, Yellow, Green, Grey, Brown, Yellow/Green. • Packaging: Strips in Box

File no. E472117

Ref.

Colour

Strip

Internal Ø Internal Ø before shrinking after shrinking

Strip Qty Strips Length per box

TSS24BK TSS32BK TSS48BK TSS64BK TSS95BK TSS127BK TSS190BK TSS254BK TSS380BK TSS510BK

BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS24RE TSS32RE TSS48RE TSS64RE TSS95RE TSS127RE TSS190RE TSS254RE TSS380RE TSS510RE

RED RED RED RED RED RED RED RED RED RED

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS24WH TSS32WH TSS48WH TSS64WH TSS95WH TSS127WH TSS190WH TSS254WH TSS380WH TSS510WH

WHITE WHITE WHITE WHITE WHITE WHITE WHITE WHITE WHITE WHITE

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS24BU TSS32BU TSS48BU TSS64BU TSS95BU TSS127BU TSS190BU TSS254BU TSS380BU TSS510BU

BLUE BLUE BLUE BLUE BLUE BLUE BLUE BLUE BLUE BLUE

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS24TR TSS32TR TSS48TR TSS64TR TSS95TR TSS127TR TSS190TR TSS254TR TSS380TR TSS510TR

TRANSPARENT TRANSPARENT TRANSPARENT TRANSPARENT TRANSPARENT TRANSPARENT TRANSPARENT TRANSPARENT TRANSPARENT TRANSPARENT

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

HEAT-SHRINKABLE TUBING

Ref.

Colour

Internal Ø Internal Ø before shrinking after shrinking

Strip

Strip Qty Strips Length per box

TSS24YE TSS32YE TSS48YE TSS64YE TSS95YE TSS127YE TSS190YE TSS254YE TSS380YE TSS510YE

YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS24GN TSS32GN TSS48GN TSS64GN TSS95GN TSS127GN TSS190GN TSS254GN TSS380GN TSS510GN

GREEN GREEN GREEN GREEN GREEN GREEN GREEN GREEN GREEN GREEN

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS24GY TSS32GY TSS48GY TSS64GY TSS95GY TSS127GY TSS190GY TSS254GY TSS380GY TSS510GY

GREY GREY GREY GREY GREY GREY GREY GREY GREY GREY

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS24BR TSS32BR TSS48BR TSS64BR TSS95BR TSS127BR TSS190BR TSS254BR TSS380BR TSS510BR

BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN

2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm 51.0 mm

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 30 20 15 10 6 4 2

TSS32Y/G TSS48Y/G TSS64Y/G TSS95Y/G TSS127Y/G TSS190Y/G TSS254Y/G TSS380Y/G

YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN

3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.0 mm

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm

1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m 1.22 m

30 30 30 20 15 10 6 4

TERMOSTRIP TSS series, flame-retardant Polyolefin shrinkage ratio 2÷1

General characteristics: • Operating temperature: -55°C + 125°C • Minimum shrinkage temperature: 70°C • Temperature for complete shrinkage: 110°C

Technical Specifications: Property Traction resistance (MPa): Elongation at failure (%): Traction resistance after heat ageing (MPa): Elongation at failure after heat ageing: (%):

Dielectric strength (kv/mm):

Test Method ASRM D2671 ASRM D2671 UL 224 158°C×168hr UL 224 158°C×168hr UL 224 250°C×4hr UL 224 -30°C×4hr IEC 243

Insulation resistance:

600V UL 224

Volume resistance (.cm):

IEC 93 UL 224 158°C×168hr UL 224 158°C×168hr UL 224

Heat resistance: Low temperature flexibility:

Corrosive action: Copper compatibility: Flammability:

Performance ≥10.4 ≥200 ≥7.3 ≥100 No failure No failure ≥15 No perforation at 2500V ≥1x10 14

Not corrosive Not corrosive VW-1

HEAT-SHRINKABLE TUBING

Reel

TERMOCOIL TCS series, flame-retardant Polyolefin shrinkage ratio 2÷1 File no. E472117

Main Features Heat-shrinkable Polyolefin tubing coil for general use; is environmentally neutral, flexible, non-flammable and offers fast heat shrinkage and stable performance. Main uses include insulation and protection of electrical conductors, connectors and terminations; protection of metal tubes from corrosion; protection of antennae and various identification applications. For technical specifications see page 3. • Colours: Black, Red, White, Blue, Yellow, Green, Grey, Brown, Yellow/Green. Consult Cembre for availability of other colours. • Packaging: Coil on Reel.

Ref.

Colour

Internal Ø Internal Ø Coil before shrinking after shrinking Length

Ref.

Colour

Internal Ø Internal Ø Coil before shrinking after shrinking Length

TCS16X200YE TCS24X200YE TCS32X200YE TCS48X100YE TCS64X100YE TCS95X100YE TCS127X100YE TCS190X100YE TCS254X50YE

YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW YELLOW

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

200 m 200 m 200 m 100 m 100 m 100 m 100 m 100 m 50 m

TCS16X200GN TCS24X200GN TCS32X200GN TCS48X100GN TCS64X100GN TCS95X100GN TCS127X100GN TCS190X100GN TCS254X50GN

GREEN GREEN GREEN GREEN GREEN GREEN GREEN GREEN GREEN

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

200 m 200 m 200 m 100 m 100 m 100 m 100 m 100 m 50 m

TCS16X200GY TCS24X200GY TCS32X200GY TCS48X100GY TCS64X100GY TCS95X100GY TCS127X100GY TCS190X100GY TCS254X50GY TCS381X50GY

GREY GREY GREY GREY GREY GREY GREY GREY GREY GREY

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.1 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm

200 m 200 m 200 m 100 m 100 m 100 m 100 m 100 m 50 m 50 m

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

200 m 200 m 200 m 100 m 100 m 100 m 100 m 100 m 50 m

TCS16X200BR TCS24X200BR TCS32X200BR TCS48X100BR TCS64X100BR TCS95X100BR TCS127X100BR TCS190X100BR TCS254X50BR TCS381X50BR

BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.1 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm

200 m 200 m 200 m 100 m 100 m 100 m 100 m 100 m 50 m 50 m

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

200 m 200 m 200 m 100 m 100 m 100 m 100 m 100 m 50 m

TCS32X200Y/G TCS48X100Y/G TCS64X100Y/G TCS95X100Y/G TCS127X100Y/G TCS190X100Y/G TCS254X50Y/G TCS381X50Y/G TCS508X25Y/G

YELLOW / GREEN YELLOW / GREEN YELLOW / GREEN YELLOW / GREEN YELLOW / GREEN YELLOW / GREEN YELLOW / GREEN YELLOW / GREEN YELLOW / GREEN

3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm 38.1 mm 50.8 mm

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

200 m 100 m 100 m 100 m 100 m 100 m 50 m 50 m 25 m

TCS12X200BK TCS16X200BK TCS24X200BK TCS32X200BK TCS48X100BK TCS64X100BK TCS95X100BK TCS127X100BK TCS160X100BK TCS190X100BK TCS254X50BK TCS320X50BK TCS381X50BK TCS508X25BK TCS762X25BK TCS1016X25BK TCS1260X25BK TCS1500X25BK

BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK

1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 16.0 mm 19.0 mm 25.4 mm 32.0 mm 38.1 mm 50.8 mm 76.2 mm 101.6 mm 126.0 mm 150.0 mm

0.6 mm 0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 8.0 mm 9.5 mm 12.7 mm 16.0 mm 19.0 mm 25.4 mm 38.1 mm 50.8 mm 63.0 mm 75.0 mm

200 m 200 m 200 m 200 m 100 m 100 m 100 m 100 m 100 m 100 m 50 m 50 m 50 m 25 m 25 m 25 m 25 m 25 m

TCS16X200RE TCS24X200RE TCS32X200RE TCS48X100RE TCS64X100RE TCS95X100RE TCS127X100RE TCS190X100RE TCS254X50RE

RED RED RED RED RED RED RED RED RED

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

TCS16X200WH TCS24X200WH TCS32X200WH TCS48X100WH TCS64X100WH TCS95X100WH TCS127X100WH TCS190X100WH TCS254X50WH

WHITE WHITE WHITE WHITE WHITE WHITE WHITE WHITE WHITE

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

TCS16X200BU TCS24X200BU TCS32X200BU TCS48X100BU TCS64X100BU TCS95X100BU TCS127X100BU TCS190X100BU TCS254X50BU

BLUE BLUE BLUE BLUE BLUE BLUE BLUE BLUE BLUE

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

HEAT-SHRINKABLE TUBING

Ref.

Colour

Internal Ø before shrinking

Box

Internal Ø Reel after shrinking Length

TBS16x20BK TBS24x20BK TBS32x10BK TBS48x10BK TBS64x10BK TBS95x10BK TBS127x10BK TBS190x5BK TBS254x5BK

BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

20 m 20 m 10 m 10 m 10 m 10 m 10 m 5m 5m

TBS16x20RE TBS24x20RE TBS32x10RE TBS48x10RE TBS64x10RE TBS95x10RE TBS127x10RE TBS190x5RE TBS254x5RE

RED RED RED RED RED RED RED RED RED

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

20 m 20 m 10 m 10 m 10 m 10 m 10 m 5m 5m

TBS16x20WH TBS24x20WH TBS32x10WH TBS48x10WH TBS64x10WH TBS95x10WH TBS127x10WH TBS190x5WH TBS254x5WH

WHITE WHITE WHITE WHITE WHITE WHITE WHITE WHITE WHITE

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

20 m 20 m 10 m 10 m 10 m 10 m 10 m 5m 5m

TBS16x20BU TBS24x20BU TBS32x10BU TBS48x10BU TBS64x10BU TBS95x10BU TBS127x10BU TBS190x5BU TBS254x5BU

BLUE BLUE BLUE BLUE BLUE BLUE BLUE BLUE BLUE

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

20 m 20 m 10 m 10 m 10 m 10 m 10 m 5m 5m

TBS16x20GY TBS24x20GY TBS32x10GY TBS48x10GY TBS64x10GY TBS95x10GY TBS127x10GY TBS190x5GY TBS254x5GY

GREY GREY GREY GREY GREY GREY GREY GREY GREY

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

20 m 20 m 10 m 10 m 10 m 10 m 10 m 5m 5m

EHG 2000

DSP-TCS Support frame for heat shrinkable tubing on a reel

Variable temperature electronic heat gun, power 2000 W Weight: 850 g; Temperature: 50°C to 600°C Voltage: 230-240 V - 50 Hz

TERMOBLOCK TBS series, flame-retardant Polyolefin shrinkage ratio 2÷1 Main Features Heat-shrinkable Polyolefin tubing for general use; is environmentally neutral, flexible, non-flammable and offers fast heat shrinkage and stable performance. Main uses include insulation and protection of electrical conductors, connectors and terminations; protection of metal tubes from corrosion; protection of antennae and various identification applications. For technical specifications see page 3. • Colours: Black, Red, White, Blue, Grey, Brown, Yellow/Green. Consult Cembre for availability of other colours. • Packaging: Roll in Dispenser Box

Ref.

Colour

Internal Ø before shrinking

Internal Ø Reel after shrinking Length

TBS16x20BR TBS24x20BR TBS32x10BR TBS48x10BR TBS64x10BR TBS95x10BR TBS127x10BR TBS190x5BR TBS254x5BR

BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN BROWN

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

20 m 20 m 10 m 10 m 10 m 10 m 10 m 5m 5m

TBS16x20Y/G TBS24x20Y/G TBS32x10Y/G TBS48x10Y/G TBS64x10Y/G TBS95x10Y/G TBS127x10Y/G TBS190x5Y/G TBS254x5Y/G

YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN YELLOW/GREEN

1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm 19.0 mm 25.4 mm

0.8 mm 1.2 mm 1.6 mm 2.4 mm 3.2 mm 4.8 mm 6.4 mm 9.5 mm 12.7 mm

20 m 20 m 10 m 10 m 10 m 10 m 10 m 5m 5m

CABLE TIES

G series, PA6.6 Polyamide Main Features Material: PA6.6 Polyamide Self-extinguishing V2 (UL 94) Humidity absorption: 2,5% (at 50% relative humidity) Operating temperature: From –40°C to +85°C (continuous) From –40°C to +120°C (short periods) Resistant to: oils, greases, oil products, chlorinated solvents. Colour: Natural or Black (Ral 2005)

Black ties have higher UV resistance due to increased carbon black loading

Natural ties offer rapid installation due to the low friction coefficient of the material

Plastic - standard

Type

G80X2.4 G80X2.4N G80X2.4/M G80X2.4N/M G90X2.4 G90X2.4N G100X2.5 G100X2.5N G100X2.5/M G100X2.5N/M G120X2.5 G120X2.5N G140X2.5 G140X2.5N G140X2.5/M G140X2.5N/M G160X2.5 G160X2.5N G160X2.5/M G160X2.5N/M G200X2.5 G200X2.5N G200X2.5/M G200X2.5N/M G250X2.8 G250X2.8N G300X2.8 G300X2.8N G120X3.6 G120X3.6N G140X3.6 G140X3.6N G140X3.6/M G140X3.6N/M G150X3.6 G150X3.6N G180X3.6 G180X3.6N G200X3.6 G200X3.6N G200X3.6/M G200X3.6N/M G250X3.6 G250X3.6N G300X3.6 G300X3.6N G300X3.6/M G300X3.6N/M G370X3.6 G370X3.6N G120X4.8 G120X4.8N G160X4.8 G160X4.8N G190X4.8 G190X4.8N G190X4.8/M G190X4.8N/M G200X4.8 G200X4.8N G200X4.8/M G200X4.8N/M G250X4.8/M G250X4.8N/M G250X4.8 G250X4.8N G280X4.8 G280X4.8N G300X4.8 G300X4.8N G370X4.8 G370X4.8N G390X4.8 G390X4.8N G430X4.8 G430X4.8N

L (mm)

A (mm)

2.4

Max. Bundle Min. Loop Tensile Ø (mm) Strength (kg)

100

120

140

2.5

200

300

2.8

65 76

120

140

150

180

200

3.6

250

300

370

102

120

160

190

200

250

4.8

1000 100 1000 8

160

250

100

250

280

300

370

102

390

105

430

110

Quantity

100 1000 1000 100 1000 100 1000

14 100

1000

100 18 1000 100 1000

100

1000 100

1000

100

CABLE TIES

Type

G450X4.8 G450X4.8N G530X4.8 G530X4.8N G150X7.6 G150X7.6N G200X7.6 G200X7.6N G250X7.6 G250X7.6N G300X7.6 G300X7.6N G370X7.6 G370X7.6N G430X7.6 G430X7.6N G530X7.6 G530X7.6N G430X9.0 G430X9.0N G530X9.0 G530X9.0N G710X9.0 G710X9.0N G780X9.0 G780X9.0N G830X9.0 G830X9.0N G920X9.0 G920X9.0N G1020X9.0 G1020X9.0N G1220X9.0 G1220X9.0N G230X12.6 G230X12.6N G380X12.6 G380X12.6N G480X12.6 G480X12.6N G580X12.6 G580X12.6N G730X12.6 G730X12.6N G880X12.6 G880X12.6N G1030X12.6 G1030X12.6N Note: In Type, N = Black

Type

G90X2.4 V0 G100X2.5/M V0 G140X2.5/M V0 G200X2.5/M V0 G150X3.6 V0 G200X4.8/M V0 G370X4.8 V0 G430X4.8 V0 G710X9.0 V0

L (mm)

450 530

Plastic - standard

A (mm) 4.8

Max. Bundle Min. Loop Tensile Ø (mm) Strength (kg)

116 140

150

200

250

300

7.6

370

102

430

125

530

140

430

110

530

140

710

190

780 830

9.0

228 239

920

263

1020

295

1220

365

230

380

106

480

120

580

12.6

152

730

204

880

248

1030

295

Quantity

G series, PA6.6 Polyamide

Angled tongue to facilitate easy introduction into the buckle

100

Rounded corners for increased safety

115

L (mm)

A (mm)

90 100 140 200 150 200 370 430 710

2.4 2.5 3.6 4.8 9.0

Max. Bundle Min. Loop Tensile Ø (mm) Strength (kg)

16 22 33 53 35 50 102 110 190

8 18 22 80

Quantity

100 1000 1000 1000 100 1000 100 100 100

G series, PA6.6 Polyamide, V0 (UL94) Main Features Same features as G series except: self-extinguishing V0 (UL 94) Colour: Natural

CABLE TIES

Plastic - special

GR series, Releasable cable ties in PA6.6 Polyamide Main Features Same features as G series. Easy installation without tools. Released by pressure on the tongue. Suitable for temporary locking. Colour: Black

L (mm)

Type

GR100X7.6N GR120X7.6N GR150X7.6N GR200X7.6N GR250X7.6N GR300X7.6N GR370X7.6N

100 120 150 200 250 300 370

A (mm)

7.6

Max. Bundle Min. Loop Tensile Ø (mm) Strength (kg)

20 30 35 50 66 80 102

22.2

Quantity

100

GFH100X2.5

GFH series, Markable cable ties in PA6.6 Polyamide Main Features Same features as G series. Quick and easy identification of bundled conductors. Write on panel with Felt tip pen. Colour: Natural

GFHT112X2.5

Type

GFH100X2.5 GFHT112X2.5

L (mm)

A (mm)

100 112

2.5

Max. Bundle Min. Loop Tensile Ø (mm) Strength (kg)

8.1

Quantity

100

1600 series, Elastomerized Polymer on Polyamide base Main Features Material: Elastomerized Polymer on Polyamide base Self-extinguishing HB (UL94) - Halogen free Operating temperature: From –45°C to + 85°C (continuous) From –45°C to + 120°C (short periods) Resistant to: UV,  salt atmosphere, oils,  greases, oil products Colour: Black

Type

Head Type

L (mm)

1618.90 1626.90 1636.90 1651.90 1676.90

single double double double double

180 260 360 510 760

A Min. Bundle Max. Bundle Min. Loop Tensile (mm) Ø (mm) Ø (mm) Strength (kg)

9 9 9 9 9

15 30 30 70 70

40 60 93 140 220

40 55 55 55 55

Qty

100 100 100 100 100

CABLE TIES

Metallic

GX series, Stainless Steel AISI 304 Main Features Type

GX200X4.5 GX300X4.5 GX370X4.5 GX520X4.5 GX370X7.9 GX680X7.9 GX1020X7.9

L (mm)

200 300 370 520 370 680 1020

A (mm)

4.5

7.9

Insert the tongue into the buckle. The internal locking ball rolls freely as the tie is tightened.

Max. Bundle Min. Loop Tensile Strength (kg) Ø (mm)

50 76 102 156 102 207 312

Quantity

46 100 114

Material: Stainless Steel AISI 304 Unique ball locking mechanism that allows simple and rapid installation and secure locking. Operating temperature: From –80°C to +500°C High tensile strength. Non-flammability. High resistance to acetic acid, alkalies, sulphuric acid, corrosion, etc. In general very resistant to most hostile environments.

Once the correct tension is reached, use the specific tool to trim the tongue. The ball then wedges into the buckle locking it tightly against both the top and bottom of the tie.

CABLE TIE TOOLS

Cable Tie Tool 5313022048 Main Features Model 5313022048

Length 162

Dimensions mm Width 133

Height 23

Weight g 208

For plastic cable ties from 2.2 to 4.8 mm Automatic cutting

Cable Tie Tool 5523036090 Main Features Model 5523036090

Length 194

Dimensions mm Width 100

Height 25

Weight g 324

For plastic cable ties from 4.8 to 9.0 mm Manual cutting

Cable Tie Tool 5527030079 Main Features Model 5527030079

Length 180

Dimensions mm Width 141

For stainless steel cable ties width up to 7.9 mm With cutting device

Height 30

Weight g 558

for Plastic & Metallic

CABLE TIE ACCESSORIES

Fixings

AB, CC, SS series, in PA6.6 Polyamide Main Features

Self adhesive cable tie bases in PA6.6

Type

Max Tie (mm)

2.8 AB 13 2.8 AB 13N 3.6 AB 19 3.6 AB 19N 4.8 AB 28 4.8 AB 28N Note: In Type, N = Black

A (mm)

B (mm)

C (mm)

H (mm)

13.0 13.0 19.0 19.0 28.0 28.0

3.2 3.2 4.0 4.0 5.3 5.3

3.2 3.2 4.4 4.4 5.7 5.7

Material: PA6.6 Polyamide Self-extinguishing V2 (UL 94) Humidity absorption: 2,5% (at 50% relative humidity) Operating temperature: From –40°C to +85°C (continuous) From –40°C to +120°C (short periods) Resistant to: oils, bases, greases, oil products, chlorinated solvents. Colour: Natural

Fixing screw Quantity hole Ø (mm)

3.1 3.1 5.5 5.5

100 100 100 100 100 100

Self adhesive cable clips in PA6.6

Type

CC 8.9 CC 9.12

Cable Ø (mm)

A (mm)

B (mm)

C (mm)

D (mm)

Quantity

8-9 9-12

9.0 12.0

12.0 15.0

8.0 8.2

21.5 21.5

100 100

Cable tie saddle clamps in PA6.6

Type

Max Tie (mm)

A (mm)

B (mm)

C (mm)

F (mm)

H (mm)

Quantity

SS 4.8-3.7 SS 4.8-4.5 SS 9-4.5 SS 9-5 SS 9-6.4

4.8 4.8 9 9 9

9.5 9.5 16.0 16.0 16.0

15 15 22 22 22

3.7 4.5 4.5 5.0 6.4

5.0 5.0 9.2 9.2 9.2

7.2 7.2 9.7 9.7 9.7

100 100 100 100 100

GH8 series, Stud fixing for cable ties in PA6.6 Main Features Ø 8,5

L (mm)

Fixing hole Ø (mm)

Quantity

40.5

100

W2 (mm)

Ø 8,5

W1 (mm)

W (mm)

GH8

Type

Same features as G series. Push into Ø 8 mm hole. Cable tie inserted through slot in head.

CABLE & CONDUIT CLIPS

Sicur clips

3600 series, modular retaining clips - ABS Main Features Material: ABS self-extinguishing class V0 (UL94) UV stabilised Glow wire resistance: 750° C (CEI EN 60695-2-1) Temperature range: –20°C to +80°C (continuous) Colour: Light Grey (RAL 7035) Application: Fix SICURclip base to surface using dia. 5 - 6 mm screw (Ref. Fig. A). Insert cable, tubing or flexible conduit. Fit adjustable cover and press to secure. Modular SICURclips of the same or different size may easily be joined together.

for cable, tubing & flexible conduit

Type

3601 3602 3603

Fig. A

ØA min-max (mm)

H (mm)

S (mm)

Quantity

13-21 24-34 38-50

8.5 8.5 8.5

16 16 16

100 50 25

CABLE & CONDUIT CLIPS

P clips

P series Main Features For securing cables, pipes and hoses Material: Zinc plated CR3 mild Steel Halogen-Free EPDM liner to absorb vibration, prevent chafing of conductor and inhibit moisture ingress Elongated lower fixing hole makes alignment easier Fixing holes suitable for M6 screw Marked with internal diameter for easy identification.

16mm

4.0-5.0 6.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 27.0 29.0 30.0 32.0 33.0 35.0 38.0 40.0 42.0 44.0 47.0 48.0 50.0 53.0 54.0 55.0 60.0 64.0 70.0

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

Marking

Quantity

P4/5 P6 P8 P9 P10 P11 P12 P13 P14 P15 P16 P18 P19 P20 P21 P22 P23 P24 P25 P27 P29 P30 P32 P33 P35 P38 P40 P42 P44 P47 P48 P50 P53 P54 P55 P60 P64 P70

100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10

12.7mm

CLIP-P4/5 CLIP-P6 CLIP-P8 CLIP-P9 CLIP-P10 CLIP-P11 CLIP-P12 CLIP-P13 CLIP-P14 CLIP-P15 CLIP-P16 CLIP-P18 CLIP-P19 CLIP-P20 CLIP-P21 CLIP-P22 CLIP-P23 CLIP-P24 CLIP-P25 CLIP-P27 CLIP-P29 CLIP-P30 CLIP-P32 CLIP-P33 CLIP-P35 CLIP-P38 CLIP-P40 CLIP-P42 CLIP-P44 CLIP-P47 CLIP-P48 CLIP-P50 CLIP-P53 CLIP-P54 CLIP-P55 CLIP-P60 CLIP-P64 CLIP-P70

Product code

Dimensions (mm)

CABLE PREPARATION TOOLS

Crimping Tool MLL1 Main Features Model MLL1

Length 252

Dimensions mm Width 78

Height 23

Weight g 556

For crimping insulated terminals, 0.25 to 6.0 sqmm

Crimping Tool MLL90 Main Features Model MLL90

Length 252

Dimensions mm Width 78

Height 23

Weight g 558

Single aperture, ratchet controlled tool for crimping female connectors, open barrel, flag type 1 to 2.5 sqmm, side insertion

Crimping Tool for RJ Plugs MLRJ1 Main Features Model MLRJ1

Length 211

Dimensions mm Width 75

Height 23

Weight g 526

For crimping plugs RJ 11; RJ 12; RJ 14; RJ 22; RJ 45. Lever system with releasable forced locking mechanism for crimp connections conforming to standard. With cutting and wire-stripping blades. Ergonomically designed two-component handles.

Crimping Tool MLS1 Main Features Model MLS1

Length 198

Dimensions mm Width 77

Height 18

Weight g 350

For crimping end sleeves, 0.25 to 6.0 sqmm

Crimping Tool MLS2 Main Features Model MLS2

Length 198

Dimensions mm Width 77

For crimping end sleeves, 6.0 to 16.0 sqmm

Height 18

Weight g 350

CABLE PREPARATION TOOLS

Crimping Tool ZP2 Main Features Model ZP2

Length 234

Dimensions mm Width 65

Height 15

Weight g 228

For crimping insulated and uninsulated connectors, 0.25 to 6.0 sqmm

Wire Stripping Tool HB5 Main Features Model HB5

Length 166

Dimensions mm Width 55

Height 15

Weight g 134

Wire stripper, for PVC insulated cables 0.25 to 6.0 sqmm

Cutting, Crimping and Stripping Tool HB7 Main Features Model HB7

Length 206

Dimensions mm Width 106

Height 21

Weight g 256

A versatile tool for cutting, crimping, and stripping. Range: 0.2 to 6.0 sqmm

Wire Stripping Tool HB8 Main Features Model HB8

Length 175

Dimensions mm Width 90

Height 22

Weight g 200

Wire stripper, for PVC insulated cables 0.2 to 6.0 sqmm

HAND TOOLS MARKETline insulated screwdrivers have dual-compound handgrips and an ergonomic design making them is particularly practical and comfortable.

Screwdrivers

Each individual screwdriver is tested in accordance with EN 60900

C 1000V

EN/IEC - 60900

To ensure quick identification, the type and size of the head are indicated in different colours on the back of the handle. The heads are made from Chromium Molybdenum steel with a hardness of 55-59 HRC and are hardened with Phosphoric Manganese Acid to increase corrosion resistance; the size of the insulating cover allows it to be inserted into tight spaces.

Blade type identification on the back of the handle

Soft and durable hand guard Narrow insulating cover to allow insertion into tight spaces Chromium Molybdenum steel head with hardness 55-59 HRC and anticorrosion surface treatment

Shaped blade for greater resistance and stability

Ergonomic and shaped hand grip

Coating in dual compound plastic material with soft rubber inserts

Head type identification codes: • White - Flat head • Yellow - “Phillips” cross head • Green - “Pozidriv” cross head

Steel tips

Ergonomic handle

Hand guard

Attachment hole 16

HAND TOOLS

Screwdrivers

Flat head screwdrivers Main Features Model SDC 3 X 100-KV SDC 3,5 X 100-KV SDC 4 X 100-KV SDC 5,5 X 125-KV SDC 6,5 X 150-KV

Head Dimensions mm Blade Total Weight g Width Thickness Length mm Length mm 3 0.5 100 185 32 3.5 0.6 100 185 35 4 0.8 100 205 58 5.5 1.0 125 230 78 6.5 1.2 150 265 115

PH Phillips cross head screwdrivers Main Features Model SDC 0PH-KV SDC 1PH-KV SDC 2PH-KV

Head Dimensions mm Size Blade Length PH0 60 PH1 80 PH2 100

Total Length mm 145 188 215

Weight g 29 64 94

PZ Pozidriv cross head screwdrivers Main Features Model SDC 0PZ-KV SDC 1PZ-KV SDC 2PZ-KV

Head Dimensions mm Size Blade Length PZ0 60 PZ1 80 PZ2 100

Total Length mm 145 188 215

Weight g 29 64 94

Set of 7 Screwdrivers – KSDC 7 KV Main Features Set consists of: SDC 3 X 100-KV SDC 4 X 100-KV SDC 5.5 X 125-KV SDC 6.5 X 150-KV SDC 0PH-KV SDC 1PH-KV SDC 2PH-KV

Dimensions mm Head Size Blade Length 3 100 4 100 5.5 125 6.5 150 PH0 60 PH1 80 PH2 100

Total Length mm 185 205 230 265 145 188 215

Weight g 32 58 78 115 29 64 94

Flat head screwdriver with mains tester Main Features Model SDC 3X60-PD Full function flat head screwdriver with mains tester. The completely transparent handle allows visibility of the indicator from any angle, ensuring high safety.

Dimensions mm Head Size Blade Length 3 65

Total Length mm 153

Weight g 34

• Transparent handle • High quality head • Ergonomic design • Pocket clip with spring

Screwdriver with 45° angled flat head

Screwdriver with angled head, ideal for terminals, sensors and actuators.

Model SDC 2.5 X 55 B SDC 3.5 X 55 B

Head Dimensions mm Size Thickness 2.5 0.55 3.5 0.55

Blade length mm 55 55

Total Length mm 143 143

Weight g 28 29

HAND TOOLS The design of MARKETline insulated pliers and the use of dual-compound plastic material in the handle cover optimise the distribution of the force over the entire surface in contact with the palm of the hand.

Pliers

This leads to: • A reduction of the effort applied • A greater transmitted force • Safer grip • Prevention of injury to the fingers between the handles As for all MARKETline insulated tools, each individual pair of pliers is tested in accordance with EN 60900

Special steel structure particularly resistant, cutting hard wire

Chrome surface

C 1000V

EN/IEC - 60900

Soft and resistant hand guard

Particularly soft articulated joint

Soft rubber inserts

Strong and long lasting grip zone Extra-long cutting edge and large recess for wide cables Shaped and ergonomic hand grip

Wide and safe hand guard Insulated handles covered in dual component plastic material

Soft articulated joint

Gripping and cutting edges

Ergonomic hand grip

HAND TOOLS

Pliers

UPC Universal pliers Main Features Model UPC 180-KV UPC 200-KV

Total Length mm 180 200

Head Dimensions mm Width Thickness 27 11 32

11.6

Weight g 287 381

TR Nippers Main Features Model TR 160-KV

Total Length mm 160

Head Dimensions mm Width Thickness 19 10

Weight g 229

TR Heavy duty nippers Main Features Model TR 200-KV

Total Length mm 200

Head Dimensions mm Width Thickness 33 28

Weight g 306

SPC Straight nose pliers Main Features Model SPC 200-KV

Total Length mm 200

Head Dimensions mm Width Thickness 21.5 10.7

Weight g 257

SPC 45° nose pliers Main Features Model SPC 200B-KV

Total Length mm 200

Head Dimensions mm Width Thickness 4.5 3.0

Total Length mm 250

Head Dimensions mm Width Thickness 29 7.7

Weight g 261

WPC Pipe wrench Main Features Model WPC 250-KV

Weight g 380

HAND TOOLS

Cutter & Saws

Retractable Cutter HB 18 Main Features Model HB 18

Length 170

Dimensions mm Width 32

Height 17

Weight g 223

Replaceable blade, adjustable from 18 mm and internal autoloader with 5 blades. Steel blade, metal handle, with soft rubber anti-slip coating. Safety lock for blade.

Hacksaw HKS 12 Main Features Model HKS 12

Length 400

Dimensions mm Width 140

Height 32

Weight g 600

Hacksaw with 300 mm blade, made from dual compound plastic, with soft anti-slip handle for a firm and secure grip. Tensioner in the handle.

Hacksaw HKS 6 Main Features Model HKS 6

Length 270

Dimensions mm Width 115

Height 20

Weight g 215

Hacksaw with 150 mm blade, made from metal, with 6 adjustments of theÂ angle of the blade. Soft rubber anti-slip handle.

Blade BL12 HKS BL12 HKS Spare blade for HKS12 (5 pieces)

Blade BL6 HKS BL6 HKS Spare blade for HKS6 (10 pieces)

Special blade and safetyÂ lock

HAND TOOLS

Hammer, Spanners & Keys

Hammer HMR 300 Main Features Model HMR 300

Length 300

Dimensions mm Width 30

Height 22.5

Weight g 300

300 g bench hammer with patented anti-vibration tri-compound handle. Aluminium alloy 6082 T6 P-Al Si 1 Mg Mn head. External surface of the handle in Polyamide A2800. Thermoplastic rubber grip. Complete with handle sleeve.

Set of 9 male Allen keys KAK 9 Main Features Model KAK 9

Length 300

Kit Dimensions mm Width Height 100 31

Weight g 430

Long type with spherical tilt up heads for use up to 30째. Made from hardened steel and equipped with carrying case. Sizes included: mm 1.5-2-2.5-3-4-5-6-8-10

Combination spanners with jointed ratchet head KRK 4 Main Features Model KRK 4

Length 335

Kit Dimensions mm Width Height 190 18

Weight g 390

Spanners equipped with 180째 swivel ratchet heads; the mechanism of the 72 teeth ratchet allows a minimum recovery angle of 5째. Made from Vanadium Steel. Sizes included: 8-10-13-17 mm

Universal key for switchboards UKC4 Main Features Model UKC4

Length 72

Dimensions mm Width 72

Height 14

Weight g 92

Universal key for switchboards Equipped with: Triangular shape 7-8 mm Double notch 3-5 mm Square shape 5-6, 7-8 mm Bit tool holder

HAND TOOLS

Measuring tapes FLS3 – FLS5 Main Features Tape dimensions Casing Length Width Dimensions mm 3m 16 mm 71x62x33

Model FLS3 FLS5

19 mm

Weight g 166

83x71x36

252

Robust tapes with ergonomic hand grip, metal casing and rubber inserts. Tape coating in Polyamide to ensures durability, anti-friction and resistance to corrosion; with integrated magnetic hook. Automatic lock and dual locking button.

Spirit Levels LVL150 – LVL200 – LVL400 Main Features Dimensions mm Length Width 150 22 200 22 400 22

Model LVL150 LVL200 LVL400

No. of tubes

Weight g

2 2 2

105 157 248

Made from robust Aluminium profiles, with precision from 0.5 to 1 mm. Equipped with shock proof tubes, and high absorption protective caps.

Chalk line PWT 1 Main Features Model PWT 1

String length 30 m

Chalk quantity 113 g

Chalk colour Blue

Weight Kit g 334

Plumb line or marker with a 30 m string. Made from dual compound material, with shock proof protection. Wind and lock the string by the crank. String equipped with toothed attachment. Supplied with 113 g of blue chalk in a refillable container.

Chalk refill for chalk line PWS 150 B PWS 150B

colour blue – Quantity 200 g

Tapes, Levels & Lines

TOOL ACCESSORIES

Stepped drills

CONICAL STEPPED DRILL-BITS

Conical stepped drill-bit SC-M1 Main Features Model SC-M1

Hole Ø range mm 6.5 - 40.5

N° 11

Steps Height mm 2

Drill size mm Length Ø Stem 96 10

Weight g 303

• Point geometry according to DIN 1412 C • No pre-drilling • Step angle 90° SC-M1 - Hole Sizes:

Conical stepped drill-bits - General characteristics • Spiral shape facilitates quiet operation, precision of cut and removal of swarf • Cutting capability unaffected by prolonged use • Suitable for use on Ferrous metals and Thermoplastic materials up to 4 mm thickness • Material: Cubic Boron Nitride (CBN) • Corner point 118° • Polished surface

Step

Hole Ø mm

1 2 3 4 5 6 7 8 9 10 11

6.5 8.5 10.5 12.5 16.5 20.5 25.5 29.0 32.5 36.5 40.5

Clearance for Metric thread M12 M16 M20 M25 M32 M40

Conical stepped drill-bit SC-PG1 Main Features Model SC-PG1

Hole Ø range mm 6 - 37

N° 12

Steps Height mm 2

Drill size mm Length Stem Ø 100 10

Weight g 293

• Point geometry according to DIN 1412 C • No pre-drilling • Step angle 90° SC-PG1 - Hole sizes Step

Hole Ø mm

1 2 3 4 5 6 7 8 9 10 11 12

6.0 9.0 12.5 15.2 18.6 20.4 22.5 26.0 28.3 30.5 34.0 37.0

Clearance for PG thread 7 9 11 13.5 16 21 29

TOOL ACCESSORIES

Spiral drills

Hammer Drill-Bits SB7-SDS-PLUS

Set of 7 Hammer Drill-Bits SB7-SDS-PLUS Main Features Model SB7-SDS-PLUS

Drill-bits with a strengthened core, to allow optimum force transmission from start to finish. Made from steel worked at a low temperature to achieve maximum resistance, and created with a spiral structure for efficient waste extraction during opeartion. Suitable for rock, brick work, concrete, cement, granite, tiles and marble. Fits all hammer drills with SDS-Plus and Hilti TE 10 double-groove shanks. Corresponding to standard: ISO 5468-DIN 8039. Weight 752 g.

Hammer Drill-bits SB7-SDS-PLUS: Ă&#x2DC; mm 5 6 6 8 8 10 12

total 110 110 160 110 160 160 160

Length mm useable 50 50 100 50 100 100 100

SB7-SDS-PLUS

SB19 SB19-TIN

TOOL ACCESSORIES

Spiral drills

Spiral Drill-Bits SB-19, SB19-TIN Sets of 19 Spiral Drill-Bits SB19 Main Features Model SB19 High speed, high performance, steel spiral drill-bits. Cross-wise sharpening allows for good balance, reducing strain during the operation. Spiral angle: 25-30° Groove profile: standard Core: standard Back angle: 118° Point geometry: Shape C Weight: 675 g Main use: Steel N/mm² <900, Cast iron Secondary use: Steel N/mm² <1100, Stainless steel, Alluminium, Brass, Bronze. Model SB19-TIN As type SB19 with additional: TiN coating to increase operating life by 300 - 400%

Spiral Drill-bits SB19: Spiral Drill-bits SB19-TIN: Ø mm 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10

SB19-TIN

total 34 40 49 57 61 70 75 80 86 93 93 101 109 109 117 117 125 125 133

Length mm useable 12 18 24 30 33 39 43 47 52 57 57 63 69 69 75 75 81 81 87

SB19

TOOL HOLDERS MARKETline tool holders are designed to provide professional users with practical and neat ways to optimise their time and working conditions.

Bag CTSB1 Main Features Model CTSB 1

Length 420

Dimensions mm Width 250

Height 340

Weight kg 3

Practical tool bag in robust fabric, with 2 separate compartments to neatly arrange hand tools. Additional equipment may be accommodated via handy hooks and external pockets while documents are safely stored inside. A shoulder strap and sturdy metal handle make it easy to carry.

Pouch CTBB1 Main Features Model CTBB 1

Length 230

Dimensions mm Width 150

Height 50

Weight g

Made from soft and strong fabric, equipped with a fast stud belt fastening. It has handy preformed compartments for holding several tools.

TOOL HOLDERS

Case VAL GPTA Main Features Model VAL GPTA

Length 470

Dimensions mm Width 360

Height 185

weight kg 4.8

Aluminium case containing two panels with elastic tool holders and an internal pocket for documents or a tablet pc. Thermoformed base with modular dividers. Fitted with an ergonomic carrying handle and a hinged lid with stop to limit the opening to 90Â°.

Chest VAL GPT Main Features Model VAL GPT

Length 557

Dimensions mm Width 230

Height 245

weight kg 3.7

Plastic tool chest with small parts holder on the lid; Removable internal tool tray. Metal latches; Aluminium handle and padlock facility. Sufficiently robust to be used as a step when closed. Stackable with otherÂ VAL GPT tool chests.

Ltd.

Design, manufacture and sales of electrical connectors and associated tools, cable accessories, marking systems, toolings and products for railway applications. In house repair, refurbishment and calibration of toolings.

www.cembre.co.uk

Cod. 6260683

Dunton Park Kingsbury Road, Curdworth Sutton Coldfield - West Midlands B76 9EB Tel.: 01675 470440 Fax: 01675 470220 E-mail: sales@cembre.co.uk