Stockton Bearings & Transmission Construction Brochure 2024 by Centurion Europe

COMMITMENT TO SUSTAINABILITY

Our signage partner is committed to achieving a more sustainable future. From the source of production to the end user’s hands, sustainability threads through every facet of our operations.

Paving the way

All energy comes from renewable sources with solar panels being installed in 2024

Minimal waste going to landfill focusing on reusing and recycling

Reduced energy KW by 25% over the last 5 years

Non-recyclable plastics are being replaced by more environmentally friendly recyclable versions

SOCIAL SUSTAINABILITY

Social sustainability promotes the health and well-being of colleagues by giving them equal opportunities and access to the resources to support their families, both socially and economically. Liaising with local residents to minimise the impact our business has on them and supporting local and national charities to help others near and far.

ENVIRONMENTAL SUSTAINABILITY

Striving to implement initiatives that contribute to the resource efficiency of materials, such as avoiding the use of single-use non-recyclable plastics and sourcing our energy from renewable sources.

ECONOMIC SUSTAINABILITY

Striving to operate in way to promote and preserve long-term economic well-being. Implementing a range of policies we strive to balance economic growth and minimise any adverse impact on people and the environment.

Ordering Process

The majority of construction signs within this catalogue will be printed with the logo of your choice FREE of charge.

Wherever you see the following logo this is where you logo will appear:

Supply the logo when ordering and your signs will be supplied with your logo printed on to it.

Image File Formats

Vector Images

Curve-based graphics

Resolution independent Logos, icons & type

Raster Images

Pixel based graphics

Resolution dependent Photos & web graphics

Image Colour Formats

Web & print photos and quick previews

Transparency with millions of colours Animation & transparency in limited colours

High quality print graphics and scans

C M Y K

CMYK is a 4-colour printing process that stands for cyan, magenta, yellow and black

CONTACT US WITH YOUR REQUEST

All signs can be printed with your branding all you need to do is follow these simple steps

Select the range of signs required and size.

Supply us with a high resolution vector logo along with a purchase order.

Artwork will be sent for approval and once signed off will be sent to production.

PLEASE NOTE:

If a logo is not provided signs will be sent blank as standard.

This is the preferred format when supplying your artwork!

Unprocessed data from digital cameras

Layered Adobe Photoshop design files

R G B

RGB is a light based colour model that stands for red, green and blue.

3.5mm Corrugated

Self-Adhesive

1.2mm Recyclable

1.2mm Self-Adhesive

HOARDING BOARDS

Hoarding boards are a great way of advertising your development and brand image as well as enforcing site safety.

Our single sided hoarding boards come as a standard size 8’ x 4’, custom sizes are also available on request.

The boards are digitally printed with your design to the highest standard on either 2.5mm or 3mm aluminium composite panel, which is a strong, very durable, rust and weather resistant material.

For extra protection, our hoarding panels can also be supplied with anti-graffiti laminate film.

For short term installations we offer an eco-friendly option on digitally printed recyclable corrugated polypropylene.

Hazard Warning Signs

Mandatory Signs

5 point PPE required at all times

3mm aluminium composite sign complete with mobile folding stand (1300 x 1500mm)

Please note: These signs do not include drill holes

Construction and General Signs

600 x

600

Fire Safety and Safe Condition

No Smoking and Prohibition Signs

Road and Traffic Signs

DOUBLE SIDED

600 x

600

TITAN BARRIER INSERT SIGNS

Available in the below materials and sizes:

• 3.5mm Correx

• 5mm Foamex

600 x 450mm plates for Titan Barriers available either single or double sided.

Vehicle Window Signs

Road Sign Frames (Stanchions)

Stencil Kits

Our laser cut stencil packs are an ideal way to create your own message. Supplied in packs of the same height, each character has spacer marks in the corner of the stencil allowing you to align your message accurately.

• Laser cut for clean character definition

• Supplied in packs of the same character height

• Alignment marks in corners

• Multiple size options available

• Custom sizes and fonts are available

Kit Includes

Lollipop Signs and Banksman Paddles

Site Entrance Signs

To be used in conjunction with the magnetic panel board below.

To be used in conjunction with the magnetic panel board to the left. Complete with stanchion frame.

DID YOU KNOW?

The UK Health and Safety Executive states that any builder, worker or sub-contractor is responsible for the health and safety on site, regardless of the size of the company (even if you are self-employed).

Furthermore it advises that even small builders should ‘keep people, including the public, away from danger’ – fence the site off and use signs to warn people.

PLEASE ASK AT THE TRADE COUNTER.

Site Safety Notice Boards

Total Size: 800 x1700mm (W x H)

Board Supplied in 2 pieces: 800 x 850mm each

Aluminium composite material with dry wipe lamination and plastic pockets.

Hinge fixings in the middle of the board complete with steel free-standing frame.

HINGED FOR EASY TRANSPORT

Site Safety Notices

With the numerous dangers found on modern construction sites, it has become harder and harder for a site safety manager to effectively demonstrate the relevant safety procedures and methods of work which are a lawful requirement.

These signs are a great way of displaying many safety messages on one concise sign.

Site Safety Notices

3mm Aluminium composite with dry wipe lamination and plastic pockets

Size: 2000 x 1200mm

Code: CS186

3mm Aluminium composite with dry wipe lamination and plastic pockets

Size: 2000 x 1200mm

Code: CS176

3mm Aluminium composite with dry wipe lamination and hinge fixings in the middle of the board

Size: 2000 x 1200mm

Code: CS177

3mm Aluminium composite with dry wipe lamination

Size: 750 x 750mm

Code: CS188

Daily Activity Board Daily De-Briefing Board

3mm Aluminium composite with dry wipe lamination. Magnetic dry wipe board in frame.

Safety Management System

3mm Aluminium composite with dry wipe lamination, complete with 6 x A4 wallets and 6 x A3 wallets

First Aid Station

Designed for indoor use, the board is laminated to allow the first aider details to be written and updated directly onto the board with a dry wipe marker.

SHESQ Information Board

3mm Aluminium composite with anti-scuff laminate complete with 10 x A4 wallets, 2 x A3 wallets and HSE poster

Fire Action Station

This station provides pertinent information for fire safety, and a central point of call when dealing with the safety checks and procedures needed for the modern workplace.

Clear Wallets

Polypropylene clear document wallet with fold-over flap and Plastic press stud fastener. Ideal for use on information or notice boards as detailed on the previous page.

Safety Posters and Literature

Accident / Injury Report Book

Every business must record employee and visitor accidents by law. This book is a quick, easy and accurate method for recording these incidents.

• Enables compliance with all requirements of the Social Security Administration Act 1992 and Data Protection Act 1996.

• Holds up to 100 incidents.

Near Miss Report Book

A quick and, easy and accurate method for recording near misses within the workplace.

• Enables you to be compliant with all requirements of the Social Security Administration Act 1992 and Data Protection Act 1996.

• Holds up to 100 incidents.

Fire Safety Log Book

The Regulatory Reform (Fire Safety) Order 2005 (FSO) requires that the ‘responsible person’ for premises should ensure that all fire safety facilities, equipment and devices are maintained in efficient working order and in good repair.

• Keeps critical fire safety information in one place.

• Includes tips on fire extinguishers, emergency lighting, fire doors, fire drills, staff training, and fire alarms.

PPE Safety Mirrors

PPE Mirrors are designed to encourage staff to check they have the appropriate PPE and that it is fitted correctly before entering the workplace.

Laser cut from Optix Acrylic mirrored sheet, each comes complete with pre-drilled holes, mirror screws and adhesive tape. PPE Mirrors are simple to use as well as being easy to keep clean and maintain.

CUSTOM SIGNS

If you cannot find a suitable standard sign from the brochure we can custom a sign to exact specification. Please note custom signs may take slightly longer to despatch than standard items.

To order a custom sign please follow the steps below:

Designing your sign

Brief

Supply a detailed brief including any specific text, imagery, radius corners, punch holes etc. We highly recommend all artwork to be sent through as high resolution vector images (see introduction page for full details).

Bleed

This area will be trimmed. All background images should cover this area.

Trim Line

This is the final cut size the artwork will be trimmed to.

Safe Area

All important information should be placed within this area.

Size

Please choose the size you require, common sizes listed below:

• 100 x 150mm

• 100 x 300mm

• 150 x 200mm

Quantity

• 300 x 200mm

• 300 x 400mm

• 400 x 600mm

• 450 x 600mm

• 600 x 150mm

• 600 x 200mm

• 600 x 800mm

• 750 x 1000mm

• 1000 x 250mm

The price per item will stay the same for any order quantity, although please note that larger orders may take longer to produce.

Material

2.5mm Foamed Polypropylene

3.5mm Corrugated Polypropylene

Self Adhesive Vinyl

Laminated Paper Paper

Aluminium Composite

1.2mm Recyclable Polypropylene

Mild Steel Sheet (without frame)

Other materials are available including magnetic and vinyl stickers please contact us for more details.

PLEASE NOTE: NOT SUPPLYING ALL INFORMATION WILL DELAY TURNAROUND

Please supply us with the quantity and relevant code along with logo or text requirements per sign.

Receive your Custom Proof

Once the purchase order is placed we will supply you with a proof of your custom design, which will need to be signed off in writing before production can commence.

Please

be sure to check:

Material

Quantity

All logo’s are correct

At this point you may request any changes to your design and a new proof will be issued or, if you are happy with your design please respond with your confirmation so production can commence.

Tagging Systems

Scaffold Tagging System

Scaffold must be inspected in the following conditions:

• Following initial erection.

• Exposure to adverse weather.

• Conditions that could affect its strength or stability.

• Following substantial alteration (addition or subtraction).

• At regular intervals not exceeding 7 days from previous inspection.

Tower Scaffold Tagging System

The Work at Height Regulations 2005 require an assessment to be undertaken before starting any work. Erection should be made to Prefabricated Access Suppliers and Manufacturers Association (PASMA) approved methods.

The Tower Scaffold Safety Tag provides an essential platform for entering and storing essential safety information, including movements and safe weight tolerances. Designed for use with the ClawTag holder, these tags can be fixed to the scaffold after erection without needing to dismantle part of the structure.

Essential safety and audit information can be referenced with the storage of these inserts after job completion.

Tag size: 75 x 180mm

Tag size: 75 x 180mm

Pack of 10 Inserts

TG0110

Box (10 Holders, 20 Inserts, 2 Pens)

Pack of 10 Inserts

(10 Holders, 20 Inserts, 2 Pens)

Ladder Tagging System

The Work at Height Regulations came into force in 2005. These regulations apply to work at height where there is a risk of fall liable to cause personal injury. This applies to both internal and external work at height, and includes below ground level and low height.

All ladders should be checked daily and prior to use for any damage, faults or wear and tear. In addition they should be inspected at defined intervals as part of a risk assessment programme. Use these inserts to manage the identification, safety, maintenance of ladders and help conform to the Work at Height Regulations 2005.

The AssetTag holder should be permanently fixed to the ladder in a suitable safe place. Perform an inspection of the ladder (a checklist is printed on the reverse) and record the result on the tag. If the ladder fails the inspection remove insert and inform a supervisor.

Tag size: 50 x 181mm

Universal Equipment Inspection

Our Universal Equipment Inspection record helps an employer comply with legislative requirements when inspecting and helps maintain equipment at suitable periods as deemed appropriate by a risk assessment.

The insert has clearly defined areas to record equipment identification or reference numbers, alongside an inspection record. This allows a user instant access to important safety information.

Should equipment fail inspection, the tag can be removed to clearly display the message ‘Do Not Use This Equipment’ which is printed on the holder.

Tag size: 50 x 181mm