Sopro product catalogue 2018 by ceramicsolutions

Valid from 1 March 2018

Â© Dudarev Mikhail_fotolia.com

Chemistry to build on

PRODUCT CATALOGUE TILE FIXING PRODUCTS | BUILDING CHEMICAL PRODUCTS | LANDSCAPING PRODUCTS

www.sopro.com

Farbbrillanz mit Garantie Brilliant colour

with a warranty

Brilliant colour with a warranty

Systemkomponente

Lime-ﬁlm-free and brilliant colour thanks to the innovative OPZ®-Technology ● OPZ® stands for „Without Portland Cement“. Portland cement can lead to the creation of a lime ﬁlm on the surface. This is prevented by using a product which is part of the OPZ® family. ● Easy handling through the use of portland cement-free products from Sopro ● For all common grout widths and types of covering material ● Suitable for the inside areas as well as the critical outside areas

Common grouts without portland cement-free technology (OPZ®)

Lime-film-free and brilliant colour thanks to the portland cement free technology

Sopro‘s portland cement-free grouts in combination with Sopro‘s portland cement free adhesives = brilliant colour with a warranty

Tile fixing products

Index of contents Tile adhesive – Tile adhesive coverage chart – Application matrix for Sopro tile adhesives

Tile grouts – Tile grout coverage chart – Application matrix for Sopro tile grouts – Application matrix for Sopro sealants

Surface fillers/renders – Application matrix for Sopro surface fillers/renders

Primers and bonding agents – Application matrix for Sopro primers and bonding agents

Waterproofings – Application matrix for Sopro water proofings

Accessories

Information

Gardening and landscaping products

Building chemical products

– Impact sound insulation and separating layer systems

4 23 24 28 41 47 48 50 68 70 75 76 94 96 100

Cleaning, impregnation and maintenance

102

Tiling tools

111

Tile fixing product systems

117

Bitumen products, sealing slurries and silification – Application matrix for Sopro water proofings

146 155

Screeds, binders and construction resins

166

Mortar and screed additives

177 180

– Application matrix for Sopro screeds and drainage mortars

Underground construction, gully-repair and shrinkage-compounded grouts

182

Surface fillers, renders and rapid-set mortars

184

Concrete repair

197

Primers, bonding agents cement paints and silica sands

200

Building chemical product systems

207

Drainage and bedding mortars

214

Paving grouts

219 224

– Paving grout coverage chart

Waterproofings

226

Surface gradient fillers and rapid-set mortars

230

Cleaning, impregnation and maintenance

233

Landscaping product systems

236

Conditions of sale and delivery

243

Sopro International

247

Sustainability/Quality management

248

European standards for tile adhesives and tile grouts

251

Sopro shipbuilding systems

255

Sopro grouting colours

261

Tile adhesives

Tile fixing products

Tile adhesives

Tile adhesives Sopro FKM XL 444 Multi-purpose eXtraLight flexible tile adhesive

15kg

ted to es

educe

HE HIG R

approx.

ERAG

Float in g

S urf

IN Formulation

bed

d be

Th in

E N 12 0

up to

d ust d be

C2 TE S1 DI

= 8,3 m²

fil lin g

Flexmortar Complies with the German Flexmortar regulations

ETA

June 2001

DANMARK with al ic pract le hand

Multi-purpose, flexible, extra-light, extra-high-coverage, dust-reduced, cementitious, highly polymer-modified adhesive meeting C2 TE S1 requirements to DIN EN 12 004. For laying and bonding of ceramic wall/ floor coverings and discoloration-resistant natural stone tiles on all substrates. Particularly suitable for large-format fully vitrified stoneware wall and floor coverings for balconies and patios. Also suitable for heated floor constructions and application to brush-on waterproof coatings. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2. • Extra-sag-resistant for laying large-format tiles • Extra-light with extra-high coverage • Reduced dust • Up to 60 % higher coverage rate 1) • Universal application: Thin-bed, floating-bed and medium-bed laying; filler coats of up to 10 mm thickness • T: thixotropic – high sag resistance due to special fibre r einforcement • E: extended open time ≥ 30 minutes • S1: deformability ≥ 2.5 mm • For indoor and outdoor use • With ship approval • About 8,3 m² coverage per 15 kg bag • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262). • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro HPS 673 and Sopro FEP: MED approval no. 118.222 (wall) and 124.096 (floor), USCG approval no. 164.112/ EC0736/118.222 (wall) and 164.117/EC0736/124.096 (floor) – Approval for shipbuilding as system component with Sopro HPS 673 and Sopro FEP plus: MED approval no. 118.405 (wall) and 124.126 (floor), USCG approval no. 164.112/ EC0736/118.405 (wall) and 164.117/EC0736/124.126 (floor) – Approval for shipbuilding as system component with Sopro HPS 673, Sopro FAS 551 and Sopro TF+: MED approval no. 124.125, USCG approval no. 164.117/EC0736/124.125 (floor) – Approval for shipbuilding as individual product: MED approval no. 118.220 (wall and floor) Licence – Very low emission according to GEV-Emicode EC1PLUS R

4 in 1-Formulation Thin bed consistency: 7.5 – 8.5 l water : 15 kg powder Floating bed consistency: 9.5 – 10.0 l water : 15 kg powder Medium bed consistency: 7.75 – 8.25 l water : 15 kg powder Surface filling: 7.5 – 8.0 l water : 15 kg powder

Coverage: approx. 0.7 kg/m² per mm coat thickness. See also page 23

Tile fixing products

Compared to Sopro standard thin-bed adhesives without lightweight-aggregates.

Order no. Packaging 444-15

Packages/pallet

Pallet weight

600 kg

Bag 15 kg with handle

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives FKM® Silver 600

R BIN D

E LIN

HIG H

S CRY TAL

fil lin g

E N 12 0

IN Formulation

DI N

S urf

C2 FT S1

Float in g

d be

bed

Th in

ted to es

d be

Silver multi-purpose flexible tile adhesive

enish Rh

Trass or

i g i n al

pid-hard c Ra

ry system na

ent – te r em

Flexmortar Complies with the German Flexmortar regulations June 2001

SZ-T

Silver-grey, multi-purpose, high-coverage, extra-rapid-set, highly polymer-modified, cementitious flexible tile adhesive, meeting C2 FT S1 requirements to DIN EN 12004, with original Rhenish trass. For installation of ceramic wall and floor coverings, in particular for light-coloured, deformation-sensitive natural stone tiles, on all substrates. For large-format fully vitrified stoneware wall and floor coverings. For balconies and patios. Suitable for use in conjunction with wall and floor heating and brush-on waterproof coatings. Creamy consistency and exceptionally smooth workability, though still with high sag resistance. With celebrated 4-in-1 formulation. Ideal for tightly scheduled contracts thanks to extrarapid set. • For indoor and outdoor use • C2: tensile adhesion strength ≥ 1.0 N/mm² • F: early tensile adhesion strength ≥ 0.5 N/mm² after 6 hours, Sopro FKM® Silver 600 after only 3 hours ≥ 0.5 N/mm² • T: thixotropic – high sag resistance due to special fibre reinforcement • S1: deformability ≥ 2.5 mm • Walkable and groutable: after approx. 2 hours • Extra-sag-resistant for laying natural stone coverings • Silver-grey adhesive, also suitable for light-coloured, translucent natural stone types • For deformation-sensitive resin-bonded tiles • Universal application: thin-bed, floating-bed and medium-bed laying; filler coats of up to 20 mm thickness • Approved as individual product for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificates Available upon request

System component

BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as individual product: MED approval no. 118.432 (wall and floor) Licence – Very low emission according to GEV-Emicode EC1PLUS R

4 in 1-Formulation Thin bed consistency: 7.0 – 7.5 l water : 25 kg powder Floating bed consistency: 8.0 – 8.5 l water: 25 kg powder Medium bed consistency: 7.0 – 7.5 l water : 25 kg powder Surface filling: 7.0 – 7.5 l water : 25 kg powder

Coverage: approx. 1.1 kg/m² per mm coat thickness. See also page 23

Order no. Packaging

Packages/pallet

Pallet weight

600-21

Bag 25 kg

1,000 kg

600-05

Bag 5 kg

200

1,000 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Sopro’s No.1 400 Flexible tile adhesive

25kg

= 9,5 m²

DI N

Float in g

IN Formulation lli

bed

Th in

d be

June 2001

E N 12 0

d be

S urf

Complies with the German Flexmortar regulations

C2 TE S1

approx.

Flexmortar

ted to es

ETA

DANMARK

4 in 1-Formulation

Highly deformable, cementitious, highly polymer-modified f lexible tile adhesive, meeting C2 TE S1 requirements to DIN EN 12 004, for laying and bonding of ceramic tiles, discoloration-resistant n atural stone units and terracotta; also for underwater applications, e. g. in swimming pools and process water containers. S uitable for h eated wall and floor constructions, brush-on waterproof coatings and fully vitrified stone-ware tiling. Very high coverage and excellent workability. Also for tile-on-tile appli cations. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2. • For indoor and outdoor use • C2: tensile adhesion strength ≥ 1.0 N/mm² • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time ≥ 30 minutes • S1: deformability ≥ 2.5 mm • Universal application: Thin bed, floating bed, medium bed, surface filling up to 20 mm • With ship approval • About 9,5 m² coverage per 25 kg bag • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro EPG 522, Sopro QS 507, Sopro PU-FD 570/571, Sopro QS 511 and Sopro TFb: MED approval no. 118.316 (wall) and 124.115 (floor), USCG approval no. 164.112/EC0736/118.316 (wall) and 164.117/EC0736/124.115 (floor) Licence – Very low emission according to GEV-Emicode EC1PLUS R

Thin bed consistency: 9.0 – 10.0 l water : 25 kg powder Floating bed consistency: 11.0 – 11.5 l water : 25 kg powder Medium bed consistency: 9.0 – 9.5 l water : 25 kg powder Surface filling: 9.0 – 9.5 l water : 25 kg powder

Coverage: approx. 1.0 kg/m² per mm coat thickness. See also page 23

Tile fixing products

Order no. Packaging

Packages/pallet

Pallet weight

400-21

Bag 25 kg

1,000 kg

400-05

Bag 5 kg

200

1,000 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Rapid-set, cementitious, highly polymer-modified flexible tile a dhesive, meeting C2 FTE, S1 requirements to DIN EN 12 004, for laying and bonding of ceramic tiles. Suitable for heated floor constructions and fully vitrified stoneware tiling. Very high coverage and excellent workability. Suitable for use in conjunction with brush-on waterproof coatings and filly vitriefied stoneware tiling. Also for heated wall and floor constructions.

Sopro‘s No.1 404 rapid-set ted to es

C2 FTE S1

June 2001

bed

lli

S urf

IN Formulation

S CRY TAL

E LIN

HIG H

Float in g d be

Th in

Complies with the German Flexmortar regulations

E N 12 0

d be

Flexmortar

DI N

Flexible tile adhesive

R BIN D

pid-hard c Ra

ry system na

ent – te r em

• For indoor and outdoor use • Universal application: Thin-bed, floating-bed and medium-bed laying; filler coats of up to 10 mm thickness • C2: tensile adhesion strength ≥ 1.0 N/mm² • F: early tensile adhesion strength: ≥ 0.5 N/mm² after 6 hours • T: thixotropic – high sag resistance due to fibre reinforcement • S1: deformability ≥ 2.5 mm • E: extended open time ≥ 30 minutes • Universal application • Working life: approx. 30 minutes • Walkable and groutable: after approx. 3 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

SZ-T

System component

4 in 1-Formulation Thin bed consistency: 5.5 – 6.5 l water : 25 kg powder Floating bed consistency: 6.5 – 7.5 l water : 25 kg powder Medium bed consistency: 5.25 – 5.75 l water : 25 kg powder Surface filling: 5.0 – 5.5 l water : 25 kg powder

Coverage: approx. 1.2 kg/m² per mm coat thickness. See also page 23

Order no. Packaging

Sopro’s No.1 401 TW

Cementitious, flexible tile adhesive, C1 TE to DIN EN 12 004, for laying and bonding of ceramic tiles in underwater areas (swimming pools) and drinking water containers.

E N 12 0

C1 TE N

le for dri ab

Sui t

ted to es

ing nk

Flexible tile adhesive

r c o n t ain

Packages/pallet

Pallet weight

404-21

Bag 25 kg

1,000 kg

404-05

Bag 5 kg

200

1,000 kg

• For indoor and outdoor use • C1: tensile adhesion strength ≥ 0.5 N/mm² • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time ≥ 30 minutes • For drinking water containers • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request

Coverage: approx. 1.2 kg/m² per mm coat thickness. See also page 23

Order no. Packaging 401-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives White, cementitious, highly polymer-modified flexible tile adhesive, meeting C2 TE S1 requirements to DIN EN 12 004, for laying and bonding of ceramic and natural stone tiles. Ideal for laying and grouting of glass mosaic. Particularly suitable for fully vitrified stoneware, swimming pools and heated floor constructions. Suitable for use in c onjunction with brush-on waterproof coatings.

Sopro’s No.1 996 white

Flexible tile adhesive

ted to es

C2 TE S1

Complies with the German Flexmortar regulations

DI N

• For indoor and outdoor use • White mortar • Particularly suitable for glass mosaic • C2: tensile adhesion strength ≥ 1.0 N/mm² • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time ≥ 30 minutes • S1: deformability ≥ 2.5 mm • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Flexmortar June 2001

E N 12 0

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.1 kg/m² per mm coat thickness. See also page 23

Order no. Packaging

Sopro’s No.1 997 white, rapid-set

White, rapid-set, cementitious flexible adhesive, meeting C2 FT requirements to DIN EN 12 004, for laying and bonding of ceramic wall/floor coverings and natural stone tiles. Ideal for fast, efficient laying and grouting of glass mosaic. Suitable for use in conjunction with brush-on waterproof coatings.

S CRY TAL

E N 12 0

C2 FT N

HIG H

ted to es

E LIN

Flexible tile adhesive

R BIN D

pid-hard c Ra

ry system na

ent – te r em

SZ-T

Packages/pallet

Pallet weight

996-21

Bag 25 kg

1,000 kg

996-05

Bag 5 kg

200

1,000 kg

• For indoor and outdoor use • White mortar • Particularly suitable for glass mosaic • C2: tensile adhesion strength ≥ 1.0 N/mm² • F: early tensile adhesion strength: ≥ 0.5 N/mm² after 6 hours • T: thixotropic – high sag resistance due to fibre reinforcement • Working life: approx. 1 hour • Walkable and groutable: after approx. 5 hours • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro DSF 423 and Sopro FEP: MED approval no. 118.223 (wall) and 124.097 (floor), USCG approval no. 164.112/ EC0736/118.223 (wall) and 164.117/EC0736/124.097 (floor) – Approval for shipbuilding as system component with Sopro DSF 423 and Sopro FEP plus: MED approval no. 118.406 (wall) and 124.127 (floor), USCG approval no. 164.112/ EC0736/118.406 (wall) and 164.117/EC0736/124.127 (floor) – Approval for shipbuilding as individual product: MED approval no. 118.221 (wall and floor) Licence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.2 kg/m² per mm coat thickness. See also page 23

Tile fixing products

Order no. Packaging 997-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Sopro VF 419 VarioFlex® Silver

Master of the large formats ted to es

E N 12 0

R BIN D

enish Rh

Trass i g i n al

Floa ti

bed ng

Thin b

formula ed

iu m b e

VarioFlex® now also in silver

Silver-grey, S1, floating-bed adhesive for efficient floor tiling Rapid-set with high crystalline water binding capacity Reliable drying, even under large-format units Also ideal for tiling on calcium sulphate screeds Also suitable for light-coloured or translucent natural stone types

Flexmortar Complies with the German Flexmortar regulations

pid-hard c Ra

d or

ry system na

ent – te r em

Im p

June 2001

e track abl re c c ec

ing Lay

SZ-T

tem s

E LIN

HIG H

S CRY TAL

ith

sy s

DI N

C2 EF S1

tile levellin

System component

Tile adhesives

Tile adhesives Sopro VF 419

Thin b

ted to es

C2 EF S1 N

E N 12 0

R BIN D

iu m b e

Trass or

formula

enish Rh

E LIN

HIG H

S CRY TAL

Floa ti

bed ng

VarioFlex® Silver large-format flexible tile adhesive

i g i n al

pid-hard c Ra

ry system na

ent – te r em

SZ-T

Flexmortar Complies with the German Flexmortar regulations

System component

June 2001

Silver-grey, rapid-set, cementitious, flexible thin-, medium- and floatingbed tile adhesive, meeting C2 EF S1 requirements to DIN EN 12 004. For installation of ceramic floor coverings. Particularly suitable for lightcoloured, discoloration-sensitive tiles and natural stone units as well as large-format units. Creamy consistency and exceptionally smooth workability for optimum floor laying. Suitable for use in conjunction with floor heating and composite (membrane plus tile finish) waterproofing systems. Ideal for fast-track or tightly scheduled schemes. High reliability through full rear-face wetting and contact adhesion plus rapid crystalline water binding. • For floors, indoors and outdoors • C2: tensile adhesion strength ≥ 1.0 N/mm² • E: extended open time ≥ 30 minutes • F: early tensile adhesion strength ≥ 0.5 N/mm² after 6 hours • S1: deformability ≥ 2.5 mm • 3-in-1 formulation: for thin-, medium- and floating-bed tilelaying • Particularly suitable for large-format fully vitrified stoneware tiles • Silver-grey adhesive, also suitable for light-coloured, translucent natural stone types • Walkable and groutable: after approx. 3 hours • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

3 in 1-Formulation Thin bed consistency: 5.5 – 6.0 l water : 25 kg powder Floating bed consistency: 6.5 – 7.5 l water : 25 kg powder Medium bed consistency: 5.0 – 5.5 l water : 25 kg powder

Coverage: approx. 1.3 kg/m² per mm coat thickness. See also page 23

Tile fixing products

Order no. Packaging 419-25

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

See also application matrix for tile adhesives on pages 24 – 27.

Highly flexible, cementitious thin-, medium- and floating-bed tile adhesive, meeting C2 E, S1 requirements to DIN EN 12004, particularly suitable for laying large-format ceramic tiles. Mortar consistency may be adjusted as required. Excellent deformation properties through p olymer modification and fibre reinforcement. High coverage. For use in conjunction with floor heating and brush-on waterproof coatings.

Sopro VF XL 413

educe

VarioFlex® large-format flexible tile adhesive ted to es

C2 E S1 E N 12 0

d ust

Floa ti

bed ng

Thin b

formula

iu m b e

Tile adhesives

Flexmortar Complies with the German Flexmortar regulations

• For floors, indoors and outdoors • Particularly suitable for large-format fully vitrified stoneware units • 3-in-1 formulation: for thin-, medium- and floating-bed tilelaying • Reduced dust • For balconies and patios • C2: tensile adhesion strength ≥ 1.0 N/mm² • E: extended open time ≥ 30 minutes • S1: deformability ≥ 2.5 mm • Working life: 3 – 4 hours • Walkable and groutable: after 12 – 14 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII

June 2001

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.0 kg/m² per mm coat thickness. See also page 23

Sopro VF HF 420

educe

ted to es

VarioFlex® high-strength flexible tile adhesive

C2 EF N

E N 12 0

after

d ust

S CRY TAL

pid-hard c Ra

R BIN D

High loadability

ry system na

ent – te r em

E LIN

HIG H

C2-adhesion strength

SZ-T

Order no. Packaging 413-25

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

Extra-rapid-set, early-high-strength, flexible, cementitious floating-bed tile adhesive. Ideal for fast-track or tightly scheduled schemes. For trouble-free laying of dishing-prone resin-bonded tiles, large-format units, cast stone units, earthenware, stoneware and fully vitrified stoneware tiles, using floating method. Suitable for use in conjunction with floor heating and brush-on waterproof coatings. For trouble-free laying of large-format fully vitrified stoneware units up to 0.5 m² in size on calcium sulphate-based screeds pretreated with undiluted Sopro GD 749 primer. For larger formats (“jumbo-size” units), calcium sulphate-based screed shall be pretreated with Sopro MGR 637 multi-purpose primer or Sopro EPG 522 epoxy primer. High reliability through full rear-face wetting and contact adhesion plus rapid crystalline water binding. • For floors, indoors and outdoors • C2: tensile adhesion strength ≥ 1.0 N/mm² • E: extended open time ≥ 30 minutes • F: early tensile adhesion strength ≥ 0.5 N/mm² after 6 hours • Working life: 30 – 45 minutes • Walkable and groutable: after approx. 2 hours • Fully loadable: after approx. 5 hours • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

System component

Coverage: approx. 1.4 kg/m² per mm coat thickness. See also page 23

Order no. Packaging 420-25

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Sopro MEG 665

ted to es

C2 E

E N 12 00

il ef or m at t

XXL tiles

e adhes til

e iv

al f Ide or

MegaFlex S2 highly-flexible tile adhesive

ly -fl e xi b

Highly flexible, two-component, waterproof (tested to PG-AIV-F), cementitious floating-bed mortar, meeting C2 E S2 requirements to DIN EN 12 004, for trouble-free laying of fully vitrified s toneware, natural and cast stone tiles using floating method. The stress-relieving effect of mortar matrix allows application to newly laid unheated cement screeds (tiles ≤ 60 × 60  cm) 1) and floor heating constructions. Ideal for use on balconies and patios. Very high saponi fication resistance and flexibility due to non-redispersible liquid polymers. High long-term frost resistance due to very low water absorption and water impermeability. Sopro MEG 666 megaFlex S2 turbo f lexible tile adhesive is recommended for low-temperature applications and where frost action is likely. • For floors, indoors and outdoors • C2: tensile adhesion strength ≥ 1.0 N/mm² • E: extended open time ≥ 30 minutes • S2: deformability ≥ 5 mm • Working life: 3 – 4 hours • Walkable and groutable: after approx. 12 hours • Water system impermeable to water • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request

Coverage: approx. 1.2 kg/m² of powder and approx. 0.4 kg/m² of dispersion per mm coat thickness. See also page 23

Sopro MEG 666

ted to es

C2 EF

E N 12 00

S CRY TAL

ef or m at

t il

e adhes til

pid-hard c Ra

ly -fl e xi b

R BIN D

ry system na

ent – te r em

e iv

XXL tiles

E LIN

HIG H

al f Ide or

MegaFlex S2 turbo highly-flexible tile adhesive

SZ-T

System component

Coverage: approx. 1.2 kg/m² of powder and approx. 0.4 kg/m² of dispersion per mm coat thickness. See also page 23

Tile fixing products

Protect from frost during transportation and storage.

Order no. Packaging

Packages/pallet

Pallet weight

665-21

Duo Pack 33.25 kg: Bag 25 kg

1,000 kg

665-08

Canister 8.25 kg

495 kg

Highly flexible, rapid-set, two-component, waterproof (tested to PG-AIV-F), cementitious floating-bed adhesive, meeting C2 EF S2 requirements to DIN EN 12 004, for trouble-free laying of fully vitrified stoneware, natural and cast stone tiles using floating method. The stress- relieving effect of mortar matrix allows application to newly laid cement screeds (tiles ≤ 60 × 60  cm) 1) and floor heating constructions. Ideal for use on balconies and patios in colder season. Very high saponification resistance and flexibility due to non-redispersible liquid polymers. High long-term frost resistance due to very low water absorption and water impermeability. For trouble-free laying of large-format fully vitrified stoneware units up to 1 m² in size on calcium sulphate screeds pretreated with undiluted Sopro GD 749 primer. • For floors, indoors and outdoors • C2: tensile adhesion strength ≥ 1.0 N/mm² • E: extended open time ≥ 30 minutes • F: early tensile adhesion strength • S2: deformability ≥ 5 mm • At +5 °C, resistant to freeze-thaw cycles after only 6 hours with tensile adhesion strength ≥ 0.5 N/mm²; tensile adhesion strength ≥ 1.0 N/mm² after 10 hours • Working life: approx. 45 minutes • Walkable and groutable: after approx. 3 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request

Order no. Packaging

Packages/pallet

Pallet weight

666-21

Duo Pack 33.25 kg: Bag 25 kg

1,000 kg

666-08

Canister 8.25 kg

495 kg

See also application matrix for tile adhesives on pages 24 – 27.

Please contact our technical department for technical advice.

Tile adhesives

Tile adhesives Sopro MEG 667

ted to es

C2 FT

E N 12 00

S CRY TAL

ly -fl e xi b

R BIN D

ent – te r em

ry system na

e adhes til

pid-hard c Ra

il ef or m at t

e iv

XXL tiles

E LIN

HIG H

al f Ide or

MegaFlex TX highly-flexible tile adhesive

SZ-T

Highly flexible, rapid-set, sag resistant, cementitious thinbed adhesive, meeting C2 FT S2 requirements to DIN EN 12 004, for trouble-free laying of fully vitrified stoneware, natural and cast stone tiles. The stress-relieving effect of mortar matrix allows application to newly laid cement screeds (tiles ≤ 60 × 60  cm) 1) and floor heating constructions. Ideal for use on balconies and patios in colder season. For swimming pools, staircases as well as facades. Very high saponification resistance and flexibility due to non-redispersible liquid polymers. High long-term frost resistance due to very low water absorption and water impermeability. • For floors and walls • Indoors and outdoors • C2: tensile adhesion strength ≥ 1.0 N/mm² • T: thixotropic, high sag resistance due to special fibre reinforcement. • F: early tensile adhesion strength • S2: deformability ≥ 5 mm • Walkable and groutable: after approx. 3 hours • Fullfills the requirements of the Swiss Tiling Association for tiling on facades • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request

System component

Coverage: approx. 1.2 kg/m² of powder and approx. 0.3 kg/m² of dispersion per mm coat thickness. See also page 23 Please contact our technical department for technical advice.

Protect from frost during transportation and storage.

Order no. Packaging

Packages/pallet

Pallet weight

667-21

Duo Pack 32 kg: Bag 25 kg

1,000 kg

667-07

Canister 7 kg

420 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Sopro MG 679 MG-Flex® XXL rapid-set highly flexible tile adhesive

Complies with the German Flexmortar regulations June 2001

R BIN D

e adhes til

MicroGum Technology ®

pid-hard c Ra

HIG H

S CRY TAL

il ef or m at t

SZ-T

e iv

ent – te r em

XXL tiles

Flexmortar

EN 12

E LIN

Tile fixing products

al f Ide or

ry system na

than standard Sopro thin-bed adhesives

C2 FT

ted to es

Rapid-set, one-component, S2-grade flexible tile adhesive Highly flexible Extra-low consumption: approx. 30 % higher coverage 1) Particularly suitable for MEGA ceramic formats ≥ 3 m2 Stress-relieving effect on newly laid cement screeds, hollow floors and board subfloors Very high crystalline water binding capacity High sag resistance for walls and floors

Bigger, faster, farther. ly -fl e xi b

Tile adhesives

Tile adhesives Sopro MG Flex XXL MG 679

ted to es

il ef or m at t

S CRY TAL

E LIN

MicroGum®Technology

e adhes til

pid-hard c Ra

ly -fl e xi b

ry system na

R BIN D

ent – te r em

e iv

XXL tiles

E N 12 00

C2 FT

al f Ide or

HIG H

MG-Flex® XXL rapid-set highly-flexible tile adhesive

SZ-T

with al ic pract le hand

Flexmortar June 2001

Coverage: approx. 0,9 kg/m² per mm coat thickness. See also page 23

Sopro MG 669

ted to es

al f Ide or

E N 12 00

il ef or m at t

e adhes til

e iv

XXL tiles

MG-Flex® highly-flexible tile adhesive

MicroGum®Technology

• For indoor use • For walls and floors • Also ideal for MEGA formats ≥ 3 m² • C2: tensile adhesion strength ≥ 1.0 N/mm² • F: early tensile adhesion strength ≥ 0.5 N/mm² after 6 hours • T: thixotropic – high sag resistance due to fibre reinforcement • S2: deformability ≥ 5 mm • Exceptionally high coverage • Stress-relieving effect • Working life: approx. 30 minutes • Walkable and groutable: after approx. 3 hours • Highly flexible • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificates Available upon request

Complies with the German Flexmortar regulations

C2 TE

Highly flexible, rapid-set, one-component, cementitious, thin-bed adhesive, meeting C2 FT S2 requirements to DIN EN 12 004, for troublefree laying of large-format fully vitrified stoneware, natural and cast stone tiles. Stress-relieving effect of mortar matrix allows application to newly laid, unheated cement screeds (tiles with edge length ≤ 60 cm) 1), wall and floor heating constructions, and hollow floors and board subfloors. Achieves reduction in impact sound. Particularly suitable for rapid application on refurbishment contracts. Excellent workability and sag resistance. Also suitable for thin, ceramic MEGA formats ≥ 3 m² due to high crystalline water binding capacity. Suitable for use as special adhesive on a wide variety of deformation-prone substrates 1).

ly -fl e xi b

Flexmortar Complies with the German Flexmortar regulations June 2001

Order no. Packaging 679-15

Packages/pallet

Pallet weight

750 kg

Bag 15 kg with handle

Highly flexible, one-component, cementitious thin-bed adhesive, meeting C2 TE S2 requirements to DIN EN 12 004, for trouble-free laying of fully vitrified stoneware, natural and cast stone tiles. On newly laid, unheated cement screeds (tiles ≤ 60 × 60  cm) 1) on wall and floor heating systems, cavity floors, mature asphalt screeds through the stress relieving effect of the mortar matrix. Not in Conjunction with elecric floor heating systems. The stress-relieving effect of the mortar matrix allows application to newly laid cement screeds and floor heating constructions. Up to 30 % higher coverage than standard thin-bed adhesives. • For indoor use • For walls and floors • C2: tensile adhesion strength ≥ 1,0 N/mm² • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time • S2: deformability ≥ 5 mm • Stress-relieving effect • Particularly recommended for bonding Sopro TDP 565 impact sound insulation board and Sopro TEB 664 impact sound insulation and separating layer • Exceptionally high coverage • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request

Coverage: approx. 0.9 kg/m² per mm coat thickness. See also page 23 Please consult our technical department for technical advice.

Order no. Packaging 669-15

Packages/pallet

Pallet weight

750 kg

Bag 15 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Cementitious flexible tile adhesive, meeting C2 TE S1 requirements to DIN  EN 12 004, offering very high coverage and excellent w orkability, for laying and bonding of ceramic tiles; also for underwater applications, e. g. in swimming pools and process water containers. Suitable for use in conjunction with floor heating, flexible brush-on waterproof coatings and fully vitrified stoneware.

Sopro FF 450 Flexible tile adhesive

25kg

= 8,5 m²

ted to es

C2 TE S1 N

approx.

E N 12 0

Flexmortar Complies with the German Flexmortar regulations June 2001

• For indoor and outdoor use • C2: tensile adhesion strength ≥ 1.0 N/mm² • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time ≥ 30 minutes • S1: deformability ≥ 2.5 mm • Flexible • About 8,5 m² coverage per 25 kg bag • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.1 kg/m² per mm coat thickness. See also page 23

Order no. Packaging

Sopro FF 451

Rapid-set, cementitious tile adhesive, meeting C2 FTE requirements to DIN EN 12 004, for laying and bonding of ceramic tiles; also for under water applications, e. g. in swimming pools and process water containers. Suitable for use in conjunction with floor heating.

E N 12 0

DI N

C2 FTE

S CRY TAL

HIG H

ted to es

E LIN

Rapid-set tile adhesive

R BIN D

pid-hard c Ra

ry system na

ent – te r em

SZ-T

Coverage: approx. 1.3 kg/m² per mm coat thickness. See also page 23

Tile fixing products

Packages/pallet

Pallet weight

450-21

Bag 25 kg

1,000 kg

450-05

Bag 5 kg

200

1,000 kg

• For indoor and outdoor use • C2: tensile adhesion strength ≥ 1.0 N/mm² • F: early tensile adhesion strength: ≥ 0.5 N/mm² after 6 hours • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time ≥ 30 minutes • Working life: approx. 30 minutes • Walkable and groutable: after approx. 3 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order no. Packaging 451-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Sopro SC 808 Flexible tile adhesive

approx.

ted to es

25kg

= 8 m²

C2 TE N

E N 12 0

Flexible, cementitious tile adhesive, meeting C2 TE requirements to EN 12 004, offering good workability and high sag resistance, for wall and floor installation of ceramic tiles and fully vitrified stoneware units. Suitable for use in conjunction with wall and floor heating and waterproof membranes. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2. • For indoor and outdoor use • C2: tensile adhesion strength ≥ 1.0 N/mm² • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time ≥ 30 minutes • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

ETA

Coverage: DANMARK approx. 1.2 kg/m² per mm coat thickness. See also page 23

White tile adhesive

= 8 m²

ted to es

DI N

C2 TE

approx.

808-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

White, cementitious flexible tile adhesive, meeting C2 TE requirements to DIN EN 12 004, offering good workability and high sag resistance, for wall and floor installation of ceramic tiles and fully vitrified stoneware units. Suitable for use in conjunction with wall and floor heating and waterproof membranes.

Sopro SC 809

25kg

Order no. Packaging

E N 12 0

• For indoor and outdoor use • White adhesive • C2: tensile adhesion strength ≥ 1.0 N/mm² • T: thixotropic – high sag resistance due to fibre reinforcement • E: extended open time ≥ 30 minutes • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.2 kg/m² per mm coat thickness. See also page 23

E N 12 0

HIG H

DI N

S CRY TAL

E LIN

Rapid-set tile adhesive

C2 FT

R BIN D

pid-hard c Ra

ry system na

ent – te r em

SZ-T

809-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

Rapid-set cementitious tile adhesive, meeting C2 FT requirements to DIN EN 12 004, offering good workability and high sag resistance, for laying and bonding of ceramic tiles. Suitable for use in conjunction with floor heating, flexible brush-on waterproof coatings and fully vitrified stoneware.

Sopro SC 810

ted to es

Order no. Packaging

• For indoor and outdoor use • C2: tensile adhesion strength ≥ 1.0 N/mm² • F: early tensile adhesion strength: ≥ 0.5 N/mm² after 6 hours • T: thixotropic – high sag resistance due to fibre reinforcement • Walkable and groutable: after approx. 3 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.2 kg/m² per mm coat thickness. See also page 23

Order no. Packaging 810-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Sopro MFK 446 Flexible adhesive for marble tiles

C2 FT

Trass

S CRY TAL

R BIN D

igin

ent – te r em

ry system na

E LIN

HIG H

EN 1

pid-hard c Ra

DI N

enish Rh

ted to es

SZ-T

Coverage: approx. 1.2 kg/m² per mm coat thickness. See also page 23

Tile fixing products

White, rapid-set, trass-bearing, cementitious, flexible natural stone tile adhesive, meeting C2 FT requirements to DIN EN 12 004, for laying and bonding of thin, calibrated, discoloration-sensitive marble and other natural stone coverings, also underwater. High protection against efflorescence, discoloration and staining. Contains Rhenish trass and white cement to reduce risk of discoloration. Suitable for use in conjunction with floor heating. Suitable for use in conjunction with floor heating and brush-on waterproof coatings. • For indoor and outdoor use • C2: tensile adhesion strength ≥ 1.0 N/mm² • F: early tensile adhesion strength: ≥ 0.5 N/mm² after 6 hours • T: thixotropic – high sag resistance due to fibre reinforcement • Flexible • Working life: approx. 1 hour • Walkable and groutable: after approx. 5 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order no. Packaging

Packages/pallet

Pallet weight

446-21

Bag 25 kg

1,000 kg

446-05

Bag 5 kg

200

1,000 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Trass-bearing, cementitious medium-bed tile adhesive for 5 – 20 mm bed thicknesses. For laying and bonding of tiles, terracotta, natural and cast stone units, and ceramic coverings with high thickness tolerances. Contains Rhenish trass to reduce risk of discoloration and efflorescence. Modified by Sopro FD 447 flexibilizing dispersion to improve deformation properties of large-format covering materials. Suitable for use in conjunction with floor heating and outdoors.

Sopro MB 425 Medium-bed tile adhesive with trass enish Rh

Trass or

• For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII

i g i n al

Coverage: approx. 1.3 kg/m² per mm coat thickness.

Order no. Packaging 425-21

Medium-bed flexible tile adhesive with trass enish Rh

Trass

DI N

C2 TE

E N 12 0

Packages/pallet

Pallet weight

1,000 kg

Flexible, trass-bearing, cementitious medium-bed tile a dhesive for 5 – 20 mm bed thicknesses. For laying and bonding of tiles, terracotta, fully vitrified stoneware, natural and cast stone units. Particularly suitable for laying large-format tiles, for tile-on-tile applications and in conjunction with floor heating. Contains Rhenish trass to reduce risk of discolo ration and efflorescence.

Sopro MB 414 ted to 1) es

Bag 25 kg

• For indoor and outdoor use • Walkable: after approx. 1 day • Low-chromate to Regulation 1907/2006 EC, Annex XVII • C2 TE according to DIN EN 12004*

i g i n al

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.3 kg/m² per mm coat thickness.

Order no. Packaging 414-21

enish Rh

Trass

pid-hard c Ra

S CRY TAL

R BIN D

Pallet weight

1,000 kg

• For indoor and outdoor use, floor • Flexible • Ideal for fast-track schemes • For levelling out irregularities up to 20 mm • Coat thickness: 5 – 20 mm • Walkable/groutable: after 3 – 4 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII

i g i n al

E LIN

SZ-T

ry system na

ent – te r em

E N 12 0

C2 EF

HIG H

Rapid-set mediumbed flexible tile adhesive

Packages/pallet

Rapid-seting, trass-bearing, cementitious medium-bed tile adhesive for 5 – 20 mm bed thicknesses. For laying and bonding of tiles, terracotta, natural and cast stone units, and ceramic coverings with high thickness tolerances. Contains Rhenish trass to reduce risk of discoloration and efflorescence. The rapid-setting properties reduce risks caused by dishing prone covering materials. Suitable for use in conjunction with floor heating and outdoors.

Sopro MB 429

ted to 1) es

Bag 25 kg

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.2 kg/m² per mm coat thickness.

Order no. Packaging 429-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Fullfills C2 TE and C2 EF according to DIN EN 12 004 using a 10 mm trowel

Tile adhesives

Tile adhesives Sopro MDM 888 Medium-/thick-bed tile adhesive

i g i n al

E LIN

Trass or

S CRY TAL

HIG H

enish Rh

R BIN D

pid-hard c Ra

ry system na

ent – te r em

SZ-T

Order no. Packaging 888-21

Sopro MDM 885 White medium-/thick-bed tile adhesive

enish Rh

Trass or

pid-hard c Ra

R BIN D

ry system na

i g i n al

ent – te r em

E LIN

HIG H

S CRY TAL

• For indoor and outdoor use • Coat thickness: 5 – 30 mm • Flexible • Working life: approx. 30 minutes • Walkable: after approx. 3 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.4 kg/m² per mm coat thickness.

Flexible, rapid-set, polymer-modified, trass-bearing, cementitious medium- and thick-bed tile adhesive for up to 30 mm bed thicknesses, indoors and outdoors, suitable for floor heating. Particularly suitable for laying large-format tiles and dark, deformation-resistant natural stone coverings using medium- or thick-bed method. Contains Rhenish trass to reduce risk of discoloration and efflorescence. The rapid-setting properties reduce risks posed by dishing-prone covering materials.

SZ-T

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

White, flexible, rapid-set, polymer-modified, trass-bearing, cementitious medium- and thick-bed tile adhesive for up to 30 mm bed thicknesses, indoors and outdoors. Suitable for floor heating. Particularly suitable for laying large-format tiles and discoloration-sensitive natural stone coverings using medium- or thick-bed method. Contains white cement and Rhenish trass to protect against discoloration and efflorescence. The rapid-setting properties reduce risks posed by dishing-prone covering materials. • For indoor and outdoor use • White mortar for discoloration-sensitive natural stone • Coat thickness: 5 – 30 mm • Flexible • Working life: approx. 30 minutes • Walkable: after approx. 3 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.4 kg/m² per mm coat thickness.

Sopro TVM 858 Thick-bed mortar with trass

enish Rh

Trass or

i g i n al

Order no. Packaging 885-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

Hydraulically setting, trass-bearing, cementitious mortar for laying and bonding of discoloration-sensitive natural stone units (e. g. Solnhofen stone tiles, Jura marble), cast stone units and window sills, using thickbed method to DIN 18 352, DIN 18 332 and DIN 18 333. For levelling substrates made from cementitious materials, e. g. screeds and concrete, in 10 – 40 mm mortar beds. Application in conjunction with Sopro HSF 748. • For indoor and outdoor use • For walls and floors • Classed under mortar group III to DIN 1053 • For paving units • For natural and cast stone units • For laying glass blocks to DIN EN 4242 • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.7 kg/m² per mm coat thickness.

Tile fixing products

Order no. Packaging 858-21

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

See also application matrix for tile adhesives on pages 24 – 27.

Sopro FFK 440

Ready-to-use flexible tile adhesive

Ready-to-use, highly flexible emulsion adhesive, meeting D2 TE requirements to DIN EN 12 004, for bonding of ceramic tiles to walls, including surfaces subject to temporary moisture exposure, e. g. toilets, kitchens and bathrooms. Suitable for floor heating constructions. • For indoor use • For walls, floor and ceiling • Good workability • Particularly suitable for tile-on-tile bonding • Highly stable • For bonding insulation boards

ted to es

D2 TE N

Tile adhesives

E N 12 0

Test certificates Available upon request

Order no. Packaging

Packages/pallet

Pallet weight

Coverage: approx. 1.6 kg/m² per mm coat thickness. See also page 23

440-20

Bucket 20 kg

660 kg

440-05

Bucket 5 kg

100

500 kg

440-01

Pot 1 kg

528

528 kg

Sopro DBE 500

Two-component epoxy tile adhesive, meeting R2 T requirements to DIN EN 12 004, for laying and bonding of ceramic tiles. For areas exposed to aggressive waters, chemicals, acids, natural fats, high compressive loads and washing-out action; for use in swimming pools, industrial and commercial facilities. Suitable for floor heating and in cojunction with brush-on waterproof coatings.

Epoxy tile adhesive

Components A + B ted to es

• For indoor and outdoor use • For walls and floors • Suitable for underwater applications • Working life: approx. 90 minutes • For critical substrates and higher service load

R2 T N

E N 12 0

Test certificates Available upon request

Coverage: approx. 1.6 kg/m² per mm coat thickness. See also page 23

Sopro PUK 503 PU adhesive

Components A + B

ted to es

R2 T N

E N 12 0

Order no. Packaging 500-50

Packages/pallet

Pallet weight

300 kg

Bucket 5 kg

Two-component, light-coloured polyurethane reaction resin adhesive, meeting R2 T requirements to DIN EN 12 004, for laying and bonding of ceramic tiles, natural and cast stone units, and resin-bonded tiles, particularly to wood-based, gypsum-based and metal substrates. Meets enhanced requirements in terms of tensile and shear adhesion strengths, elasticity and watertightness on critical substrates. • Highly flexible • For walls and floors • For indoor and outdoor use • With ship approval • Working life: approx. 45 minutes • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262) • GISCODE RU 1 Test certificate Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro Brillant®: MED approval no. 118.224 (wall) and 124.099 (floor), USCG approval no. 164.112/EC0736/118.224 (wall) and 164.117/EC0736/124.099 (floor)

Coverage: approx. 1.5 kg/m² per mm coat thickness. See also page 23 Protect from frost during transportation and storage.

Order no. Packaging 503-84

Packages/pallet

Pallet weight

360 kg

Bucket 6 kg

See also application matrix for tile adhesives on pages 24 – 27.

Tile adhesives

Tile adhesives Sopro FD 447 Flexibilizing dispersion

Synthetic resin dispersion used as additive to enhance adhesion and deformability of Sopro thin-bed and medium-bed tile adhesives. The adhesive‘s tensile adhesion and shear strengths are increased, the interlock with substrate improved and reliability boosted for large-format tiles, particularly for fully vitrified stoneware and in conjunction with floor heating. Allows early laying and bonding to min. 3-month-old concrete, lightweight concrete, aerated concrete and masonry. • For walls and floors • For indoor and outdoor use • For renovation and refurbishment

Coverage: 2.5 kg for 25 kg dry mortar; as specified in product information

Sopro ELD 458 Conductive dispersion

Order no. Packaging 447-83

Canister 5 kg

Packages/pallet

Pallet weight

450 kg

Liquid dispersion used to prepare static-dissipating, hydraulically setting, thin-bed tile adhesives and tile grouts. For static dissipation in: – operating theatres, computer rooms and offices – power stations, chemical plants – production and storage facilities subject to explosion hazards

Coverage: 3.75 kg for 25 kg dry mortar

Order no. Packaging

Sopro® RMK 818

One-component, silane terminated polymer-based universal adhesive for bonding wide range of materials, e. g. tiles, natural stone, wood, glass, metal and plastics, and for fixing insulation materials, skirtings and metal track. For indoor and outdoor use. Also suitable for waterproof bonding/sealing of joints in Sopro AEB 640/ AEB plus 639 waterproofing and separating membranes and for fixing Sopro AEB 641 sealing tape, Sopro AEB 642/643 sealing tape for internal/ external angles and Sopro AEB 645 floor collars.

Racofix® universal adhesive

458-43

Canister 3.75 kg

Packages/pallet

Pallet weight

approx. 248 kg

• Water-resistant • For bonding wide range of materials • Colour: white • Resistant to weathering and ageing

Coverage: approx. 1.4 kg/m² per mm coat thickness

Tile fixing products

Protect from frost during transportation and storage.

Order no. Packaging 818-71

Cartridge 431 g

Packages/pallet

Pallet weight

1,080

465 kg

Tile adhesives

Sopro tile adhesive coverage chart Square serration

4 mm

6 mm

8 mm

10 mm

12 mm

20 mm

Coverage kg/m²

Consumpt. m²

Coverage kg/m²

Consumpt. m²

Coverage kg/m²

Consumpt. m²

Sopro SC 808

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro SC 810

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro SC 809

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro DBE 500

5 kg

1.6

3.1

2.4

2.1

3.2

1.6

4.0

1.3

—

Sopro FKM® Silver 600

25 kg 5 kg

1.1

22.7 4.5

1.7

14.7 3.0

2.2

11.4 2.3

2.8

8.9 1.8

3.3

7.6 1.5

3.5

7.1 1.4

Sopro FKM® XL 444

15 kg

0.7

21.4

1.1

13.6

1.4

10.7

1.8

8.3

2.1

7.1

2.7

5.6

Sopro FF 450

25 kg 5 kg

1.1

22.7 4.5

1.7

14.7 3.0

2.2

11.4 2.3

2.8

8.9 1.8

3.3

7.6 1.5

—

Sopro FFK 440

20 kg 5 kg 1 kg

1.6

12.5 3.1 0.6

2.4

8.3 2.1 0.4

3.2

6.3 1.6 0.3

4.0

5.0 1.3 0.2

—

Sopro FF 451

25 kg

1.3

19.2

2.0

12.5

2.6

9.6

3.3

7.6

3.9

6.4

—

Sopro MFK 446

25 kg 5 kg

1.2

20.8 4.2

1.8

13.9 2.8

2.4

10.4 2.1

3.0

8.3 1.7

3.6

6.9 1.4

—

Sopro MEG 666 megaFlex S2 MEG 665 Comp. A

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

Sopro MEG 666 megaFlex S2 MEG 665 Comp. B

8,25 kg

0.4

20.8

0.6

13.9

0.8

10.4

1.0

8.3

1.2

6.9

—

Sopro MEG 666 megaFlex S2 MEG 665

33,25 kg

1.6

20.8

2.4

13.9

3.2

10.4

4.0

8.3

4.8

6.9

—

Sopro MEG 666 megaFlex S2 turbo MEG 666 Comp. A

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

Sopro MEG 666 megaFlex S2 turbo MEG 666 Comp. B

8,25 kg

0.4

20.8

0.6

13.9

0.8

10.4

1.0

8.3

1.2

6.9

—

Sopro MEG 666 megaFlex S2 turbo MEG 666

33,25 kg

1.6

20.8

2.4

13.9

3.2

10.4

4.0

8.3

4.8

6.9

—

Sopro MEG 666 megaFlex TX MEG 667 Comp. A

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

Sopro MEG 666 megaFlex TX MEG 667 Comp. B

7 kg

0.3

20.8

0.5

13.9

0.7

10.4

0.8

8.3

1.0

6.9

—

Sopro MEG 666 megaFlex TX MEG 667

32 kg

1.5

20.8

2.3

13.9

3.1

10.4

3.8

8.3

4.6

6.9

—

Sopro MG-Flex® 669

15 kg

0.9

16.7

1.4

10.7

1.8

8.3

2.3

6.5

2.7

5.6

—

Sopro MG-Flex® XXL rapid-set 679

15 kg

0.9

16.7

1.4

10.7

1.8

8.3

2.3

6.5

2.7

5.6

—

Sopro‘s No.1 400

25 kg 5 kg

1.0

25.0 5.0

1.5

16.7 3.3

2.0

12.5 2.5

2.5

10.0 2.0

3.0

8.3 .7

3.7

6.8 1.4

Sopro‘s No.1 rapid-set 404

25 kg 5 kg

1.2

20.8 4.2

1.8

13.9 2.8

2.4

10.4 2.1

3.0

8.3 1.7

3.6

6.9 1.4

4.6

5.4 1.1

Sopro‘s No.1 TW 401

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro‘s No.1 white 996

25 kg 5 kg

1.1

22.7 4.5

1.7

14.7 3.0

2,2

11.4 2.3

2.8

8.9 1.8

3.3

7.6 1.5

—

Sopro‘s No.1 white rapid-set 997

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

6 kg

1.5

4.0

2.3

2.6

3.0

2.0

3.8

1.6

—

25 kg

1.4

17.9

2.1

11.9

2.8

8.9

3.5

7.1

4.2

6.0

—

25 kg

1.3

19.2

2.0

12.5

2.6

9.6

3.3

7.6

3.9

6.4

4.2

8.3

3.7

Container size

Consumpt. m²

serration

Coverage kg/m²

serration

Consumpt. m²

serration

Coverage kg/m²

serration

Consumpt. m²

serration

Coverage kg/m²

serration

U-shaped serration 1)

SoproPU-Kleber PUK 503 SoproVarioFlex® HF® VF HF 420 SoproVarioFlex® Silver VF 419 SoproVarioFlex® XL VF XL 413

All stated consumption/coverage rates depend on angle of application with notched trowel and on substrate type and levelness.

25 kg

1.0

25.0

1.5

16.7

2.0

12.5

2.5

10.0

TKB serration M1

3.0

6.0

6.8

Tile adhesives

Sopro FKM® XL 444 Highly-flexible tile adhesive

Sopro FKM® Silver 600 Multi-purpose flexible tile adhesive

Sopro’s No. 1 400 Flexible tile adhesive

Sopro’s No. 1 404 Rapid-set flexible tile adhesive

Binder

Cement

DIN EN 12 004

C2 TE S1

C2 FT S1

C2 TE S1

C2 FTE S1

EMICODE

EC1

EC1PLUS R

General

PLUS

DGNB (German sustainable building council): highest quality level 4, row 8 (see page 248) Use

PLUS

Wall and floor

Interior and exterior

Damp and wet rooms

Floor heating

Large format tiles up to 1 m²

≥Large format tiles Large format tiles 1 m²

Fully vitrified stoneware

Covering material

Synthetic rasin based tiles

Natural stone system DS (dark stone, deformation stable)

Natural stone system HS (light natural stone, deformation stable)

Natural stone system D+ (dark natural stone, sensitive for deformation)

Natural stone system H+ (light natural stone, sensitive for deformation)

Substrates

l l

Cement screed, interior and exterior

Heated/unheated anhydrite screed

Dry screed

Magnesia screed

Stone-wood floors/screeds

Poured asphalt, GE 10, GE 15 interior, unheated

l min. 3 months old

Aerated concrete, interior walls

Even-surface masonry; not mixed masonry

Plaster (cement plaster/lime cement plaster)

Gypsum plaster

Old tiles

Carpet and PVC glue residue

Laquer coatings, non-removable

Oil paint

Wooden boards, floor

Chipboard, walls

Fibre cement boards (interior)

Gypsum plaster board/plaster fibreboard (Fermacell)

Metal

Concrete walls, interior walls

Tile fixing products

Please consider the technical product information for substrate preparation as well as for water proofing and seperation works if applicable or consult our technical service.

To be continued on next page

Sopro’s No. 1 996 White flexible tile adhesive

Sopro’s No. 1 997 Rapid-set white, flexible tile adhesive

Sopro VF XL 413 VarioFlex® XL tile adhesive

Cement

C2 TE S1

C2 FT

C2 E S1

C2 EF S1

EC1

PLUS

EC1

PLUS

SilverSopro VF HF Sopro VF 419 420 VarioFlex® early VarioFlex®, rapid-set high strength tile tile adhesive adhesive

PLUS

Sopro FF 450 Flexible tile adhesive

Sopro FF 451 Rapid-set tile adhesive

Cement

C2 EF

C2 TE S1

C2 FTE

EC1

PLUS

EC1

PLUS

EC1PLUS R

Floor

l l

l min. 3 months old

l particularly recommended

l suitable

Tile adhesives

Application matrix

Tile adhesives

Sopro SC 808 Standard tile adhesive

Sopro SC 810 Standard tile adhesive, rapid-set

Sopro megaFlex S2 Highly-flexible floating tile adhesive

Sopro megaFlex S2 turbo, Highlyflexible floating tile adhesive

Cement

C2 TE

C2 FT

C2 E S2

C2 EF S2

General Binder DIN EN 12 004 EMICODE

EC1

PLUS

DGNB (German sustainable building council): highest quality level 4, row 8 (see page 248)

EC1

PLUS

Wall and floor

Floor

Interior and exterior

Damp and wet rooms

Floor heating

Large format tiles up to 1 m²

≥Large format tiles Large format tiles 1 m²

Use

Covering material

Fully vitrified stoneware

Synthetic rasin based tiles

Natural stone system DS (dark stone, deformation stable)

Natural stone system HS (light natural stone, deformation stable) Natural stone system D+ (dark natural stone, sensitive for deformation)

Natural stone system H+ (light natural stone, sensitive for deformation) Substrates 1) Cement screed, interior and exterior

l 2)

Heated/unheated anhydrite screed

Dry screed

Magnesia screed

Stone-wood floors/screeds

Poured asphalt, GE 10, GE 15 interior, unheated

l min. 3 months old

l min. 28 days old

Aerated concrete, interior walls

Even-surface masonry; not mixed masonry

Plaster (cement plaster/lime cement plaster)

Gypsum plaster

Old tiles

Carpet and PVC glue residue

Laquer coatings, non-removable

Oil paint

Wooden boards, floor

Chipboard, walls

Concrete walls, interior walls

Fibre cement boards (interior)

Gypsum plaster board/plaster fibreboard (Fermacell)

Metal

Tile fixing products

Please consider the technical product information for substrate preparation as well as for water proofing and seperation works if applicable or consult our technical service.

Sopro Sopro megaFlex TX, Highly- MG-Flex 669, flexible tile adhesive Highly-flexible tile adhesive

Tile adhesives

Application matrix

Sopro MG-Flex 679, Highly-flexible tile adhesive, rapid-set

Sopro MFK 446 Flexible adhesive for marble tiles

Sopro FFK 440 Flexible ready-touse tile adhesive

Sopro DBE 500 Epoxy tile adhesive, two component

Sopro PUK 503 Highly-flexible poly urethane adhesive, two-component

Cement

Dispersion

C2 FT S2

C2 TE S2

C2 FT S2

C2 FT

D2 TE

R2 T

EC1

PLUS

indoor

l l

l 2)

l min. 28 days old

l min. 3 months old

l min. 28 days old

l min. 3 months old

l min. 28 days old

l l particularly recommended

l suitable

Young, unheated cement screed: up to the 5th. day; after that only after 28 days.

Tile grouts Sopro DF 10® Flexible designer tile grout 1 – 10 mm

ctio prote nced enha inst acidic * aga ers n a e cl

d loure ntly co brillia lime-film and ee fr

ould nts m preve ation form

ted to

Walkable after only

Extra-high abraision resistance

CG2 WA

Loadable after 12 hours!

HIG H WA

y t o cle a

S CRY TAL

E LIN

imicrobi nt

R BIN D

cement thro ug an nh

• For all types of ceramic, natural stone, glass mosaic and agglomerate tile coverings • Can incorporate Sopro glitter gold or silver for enhanced visual appeal • For indoor and outdoor use, for walls and floors • Uniformly brilliant colouring and lime-film-free thanks to Portland cement-free (PCF) technology • Easy-care due to water and dirt repellency • Enhanced resistance, even to acidic cleaners 1) • Greater protection against mould formation and microorganisms 3) • Walkable after only approx. 2 hours, loadable after only approx. 12 hours • Extra-high abrasion resistance: CG2 WA to DIN EN 13 888 • High crystalline water binding capacity • Approved as individual product for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificate BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as individual product: MED approval no. 118.433 (wall) and 124.137 (floor), USCG approval no. 164.112/ EC0736/118.433 (wall) and 164.117/EC0736/124.137 (floor) Licence – Very low emission according to GEV-Emicode EC1PLUS 2)

dition ad

itt

Option al e

EN 1

2 hours!

Reduced water absorption

DI N

s Te

Strong, flexible, rapid-set, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for grouting all types of ceramic and natural stone covering to produce brilliantly coloured, lime-film-free finish. Enhanced protection against mould formation and micro organisms plus lime-film-free finish ensure brilliantly coloured joint pattern with lasting appeal, for both indoor and outdoor applications, and especially in moisture-exposed areas. Inherent water-beading effect and Hydrodur® technology create water- and dirt-repellent joints with antimicrobial capability. Also suitable for floor heating constructions.

l d a n d s il v

Colour

System component

compared to standard Sopro cemen titious tile grouts for domestic appli cations.

applicable to all Sopro DF 10® colours except deep blue, signal red and wine red.

treated product according to biocide decree; please consult the current information at www.sopro.com

Tile fixing products

white 10 light grey 16 silver grey 17 manhattan 77 grey 15 sandgrey 18 stone grey 22 concrete grey 14 basalt 64 anthracite 66 black 90 parchment 27 jasmin 28 light beige 29 beige 32 beige bahama 34 jurabeige 33 caramel 38 sahara 40 brown 52 chestnut 50 mahogany 55 balibrown 59 ebony 62 deep blue 98 signal red 91 wine red 92

Bucket 10 kg Order no. – – 1052-10 – 1053-10 1055-10 1062-10 1054-10 – 1060-10 1061-10 – – – – – – – – – – – – – – – –

Packaging

Coverage: See page 41

Bucket 5 kg Order no. 1050-05 1051-05 1052-05 1069-05 1053-05 1055-05 1062-05 1054-05 1073-05 1060-05 1061-05 1058-05 1056-05 1063-05 1057-05 1065-05 1064-05 1068-05 1074-05 1066-05 1067-05 1075-05 1059-05 1076-05 1072-05 1070-05 1071-05

Bucket 1 kg Order no. 1050-01 1051-01 1052-01 1069-01 1053-01 1055-01 1062-01 1054-01 1073-01 1060-01 1061-01 1058-01 1056-01 1063-01 1057-01 1065-01 1064-01 1068-01 1074-01 1066-01 1067-01 1075-01 1059-01 1076-01 – – –

Packages/pallet

Pallet weight

Bucket 10 kg

440 kg

Bucket 5 kg

360 kg

288 (48 cartons)

288 kg

Bucket 1 kg (only available in box with 6)

See also application matrix for tile grouts on pages 48 – 49.

Tile grouts

Sopro DF 10® balibrown

Sopro DF 10® anthracite with Sopro Glitter silver

Sopro Glitter Glitter

Coverage (Sopro DF 10®) max. 4 bags per 10 kg, max. 2 bags per 5 kg, max. 40 g per 1 kg

Sopro DF 10® grouting colours

Metallic colour glitter for addition to Sopro DF 10®, Sopro FL plus, Sopro Titec+ or FEP plus epoxy tile grout to achieve shiny metallic effect.

Order no.

Colour

Packaging

1019-80

gold

Carton 1 kg (10 bags à 100 g)

1020-80

silver

Carton 1 kg (10 bags à 100 g)

The impact of all colours can be enhanced using Sopro Glitter in gold or silver!

white 10

light grey 16

silver grey 17

manhattan 77

grey 15

sandgrey 18

stone grey 22

concrete grey 14

basalt 64

anthracite 66

black 90

parchment 27

jasmin 28

light beige 29

beige 32

beige bahama 34

jurabeige 33

caramel 38

sahara 40

brown 52

chestnut 50

mahogany 55

balibrown 59

ebony 62

deep blue 98

signal red 91

wine red 92 For technical reasons, the colours shown here may diverge from those of the fully cured material.

Tile grouts

Sopro FL plus ďŹ&#x201A;exible tile grout Tile grouts

Try it once and youâ&#x20AC;&#x2DC;ll be a fan for life! Excellent workability and permanent colour brilliance

red colou antly brilli lime-film and ee fr

ction prote nced enha inst acidic * aga ers clean

r- and wate ellent p e -r t dir

ould nts m preve ation m for

Sopro FL plus grouting colours

The impact of all colours can be enhanced using Sopro Glitter in gold or silver!

white 10

light grey 16

silver grey 17

grey 15

sandgrey 18

stone grey 22

concrete grey 14

basalt 64

anthracite 66

black 90

jasmin 28

light beige 29

beige bahama 34

jurabeige 33

brown 52

balibrown 59

Tile fixing products

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Sopro FL plus 2 – 20 mm

ction prote nced enha inst acidic * aga rs e clean

d loure ntly co brillia lime-film and ee fr

ould nts m preve ation form

s Te

ted to

CG2 WA

2 hours!

Reduced water absorption

Loadable after 12 hours!

y t o cle a

cement thro ug an nh

itt

of pr

dition ad

Option al e

R BIN D

with al ic pract le hand

HIG H WA

S CRY TAL

E LIN

imicrobi nt

E N 13 8

Walkable after only

Extra-high abraision resistance

l d a n d s il v

Strong, flexible, frost-resistant, rapid-set, cementitious tile grout for wide and narrow joints in wall and floor coverings, indoors and outdoors, to produce brilliantly coloured, lime-film-free finish. For smooth, easy grouting of stoneware, fully vitrified stoneware, natural and cast stone coverings, ceramic split tiles, glass blocks and clinker floor tiles. For public and private areas, in damp and wet spaces, and on balconies and patios. Enhanced protection against mould formation and micro organisms plus lime-film-free finish ensure brilliantly coloured joint pattern with lasting appeal. Inherent water-beading effect and Hydrodur® technology create water- and dirt-repellent joints with antimicrobial capability. Also suitable for use in conjunction with wall and floor heating. Sopro gold glitter or Sopro silver glitter can be added to create a distinctive, glistening joint finish. • Joint width: 2 – 20 mm • For walls and floors, indoors and outdoors • First-rate joint-filling properties and washability (removability) • Uniformly brilliant colouring and lime-film-free thanks to OPZ® (Portland cement-free) technology • Easy-care due to water and dirt repellency • Enhanced protection against mould formation and microorganisms 2) • Optimum degree of joint filling • High crystalline water binding capacity • High abrasion resistance: CG2 WA to DIN EN 13 888 • Resistant to high-pressure cleaning equipment 3) • Enhanced resistance, even to acidic cleaners 1) • Walkable after only 2 hours, loadable after only approx. 12 hours • Optional enhancement through addition of Sopro gold and silver glitter (see page 29) Licence – Very low emission according to GEV-Emicode EC1PLUS

System component

Colour

Bag 15 kg Order no.

Bag 5 kg Order no.

white 10

NEW

1135-15

1135-05

light grey 16

NEW

1131-15

1131-05

silver grey 17

1126-15

1126-05

grey 15

1120-15

1120-05

sandgrey 18

1122-15

1122-05

stone grey 22

1127-15

1127-05

concrete grey 14

1121-15

1121-05

basalt 64

1125-15

1125-05

anthracite 66

1123-15

1123-05

black 90 jasmin 28

1124-15

1124-05

NEW

1133-15

1133-05

light beige 29

NEW

1132-15

1132-05

beige bahama 34

1129-15

1129-05

jurabeige 33 brown 52

1130-15

1130-05

1134-15

1134-05

1128-15

1128-05

Packages/pallet

Pallet weight

balibrown 59

NEW

compared to standard Sopro cemen titious tile grouts for domestic appli cations.

treated product according to biocide decree; please consult the current information at www.sopro.com

Standard household cleaners.

Packaging

Coverage: See page 41 See also application matrix for tile grouts on pages 48 – 49.

Bag 15 kg with handle

1,050 kg

Bag 5 kg

200

1,000 kg

Tile grouts

Tile grouts Sopro TF+

Cementitious, brilliantly coloured, high-strength, rapid-set grout, meeting CG2 WA requirements to DIN EN 13 888, for extra-heavyduty applications. For high mechanical strength and abrasion resistant as well as discoloration-sensitive areas such as wellness and shower areas, swimming pools, drinking water conntainers, car dealers, commercial kitchens, exhibitions areas... For grouting stoneware, fully vitrified stoneware, natural and cast stone coverings. The lime-film-free finish ensures a brilliantly coloured joint pattern with lasting appeal, for both indoor and outdoor applications, especially in moisture-exposed areas. Also appropriate for floor heating constructions.

High-strength tile grout Tile grouts

1 – 10  mm

reaction to r

Walkable after only

2 hours! Loadable after 12 hours!

S CRY TAL

s Te

E LIN

Sui t

E N 13 8

le for dri ab

ing nk

with al ic pract le n a h d

R BIN D

Reduced water absorption

CG2 WA DI

ted to

Extra-high abraision resistance

HIG H

Cement instead of epoxi

grouts in es

Alternativ

loure ntly co brillia lime-film and ee fr

r c o n t ain

cement thro ug an nh

BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro HPS 673, Sopro FAS 551 and Sopro FKM XL 444: MED approval no. 124.125, USCG approval no. 164.117/ EC0736/124.125 (floor) – Approval for shipbuilding as individual product: MED approval no. 118.404 (wall) and 124.124 (floor), USCG approval no. 164.112/EC0736/118.404 (wall) and 164.117/ EC0736/124.124 (floor) Licence – Very low emission according to GEV-Emicode EC1PLUS

itt

dition ad

Option al e

• 1 – 10 mm joint widths • For walls and floors, indoors and outdoors • Lime-film-free and brilliantly coloured through OPZ® technology • For walls and floors, indoors and outdoors • Fulfills the minimum requirements for reaction rasin mortars with regard to abrasion resistance ≤ 250 mm³ and compressive strength ≥ 45 N/mm² • Suitable also for drinking water containers • Resistant to frost and de-icing salts • Highly resistant to steam jet cleaning • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request

High loadability

High mechanical strength and abrasion resistance through use of Mikrodur® microcement. As an alternative to epoxy-based grouts.

l d a n d s il v

System component

Coverage: See page 41

Order no. Colour

Packaging

Packages/pallet

Pallet weight

591-15

white 10

Bag 15 kg with handle

1,050 kg

556-15

silver grey 17

Bag 15 kg with handle

1,050 kg

592-15

grey 15

Bag 15 kg with handle

1,050 kg

585-15

concrete grey 14 Bag 15 kg with handle

1,050 kg

593-15

anthracite 66

Bag 15 kg with handle

1,050 kg

598-15

black 90

Bag 15 kg with handle

1,050 kg

Sopro TF+, Sopro TFb and Sopro FL grouting colours

white 10

silver grey 17

grey 15

sandgrey 18

stone grey 22

basalt 64

anthracite 66

black 90

beige 32

jurabeige 33

Tile fixing products

See also application matrix for tile grouts on pages 48 – 49.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

concrete grey 14

Sopro TFb High-strength tile grout 3 – 30  mm

s Te

ted to

Extra-high abraision resistance

DI e

Reduced water absorption

E N 13 8

reaction to r

enish Rh

grouts in es

Alternativ

CG2 WA

Cement instead of epoxi

Trass or

i g i n al

High-strength, rapid-set, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for extra-heavy-duty applications. High mechanical strength and abrasion resistance through use of Mikrodur® microcement. For grouting stoneware, fully vitrified stoneware, natural and cast stone coverings. Fine, smooth surface makes it particularly suitable for grouting glass and porcelain mosaic or tesserae. Particularly suitable for joints subject to high mechanical loads in work shops, washing facilities, catering kitchens, industrial facilities and swimming pools. • 3 – 30 mm joint widths • For walls and floors, indoors and outdoors • High strength • Highly resistant to steam jet cleaning • With ship approval • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): − Approval for shipbuilding as system component with Sopro EPG 522, Sopro QS 507, Sopro PU-FD 570/571, Sopro QS 511 and Sopro‘s No.1 (order no. 400): MED approval no. 118.316 (wall) and 124.115 (floor), USCG approval no. 164.112/EC0736/118.316 (wall) and 164.117/ EC0736/124.115 (floor) Licence – Very low emission according to GEV-Emicode EC1PLUS R

High loadability

Please consult resistance table!

Order no. Colour

Packaging

Packages/pallet

Pallet weight

Coverage: See page 41

554-21

grey 15

Bag 25 kg

1,000 kg

557-21

concrete grey 14

Bag 25 kg

1,000 kg

Sopro FL

Flexible, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for grouting ceramic, fully vitrified stoneware, natural and cast stone coverings, and glass block assemblies. Rapid set for low-suction tiles, with specially t ailored joint-filling properties and first-rate washability (removability). Particularly suitable for balconies, patios and floor heating s ystems.

Flexible tile grout 2 – 20  mm

s Te

enish Rh

ted to

Extra-high abraision resistance

Trass

DI N

Reduced water absorption

CG2 WA

E N 13 8

i g i n al

• 2 – 20 mm joint widths • For walls and floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS 1) – Very low emission according to GEV-Emicode EC1PLUS R

Colour

Only colours concrete grey, basalt, anthracite and black.

Coverage: See page 41 See also application matrix for tile grouts on pages 48 – 49.

Bag 25 kg Order no.

Bag 5 kg Order no.

silver grey 17

528-21

528-05

grey 15

526-21

526-05

sandgrey 18

627-21

627-05

stone grey 22

622-21

622-05

concrete grey 14

529-21

529-05

basalt 64

625-21

–

anthracite 66

626-21

–

black 90

628-21

–

beige 32

629-21

–

jurabeige 33

624-21

–

Packaging

Packages/pallet

Pallet weight

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Tile grouts

Tile grouts Sopro Saphir® 5 Water-repellent tile grout Tile grouts

1 – 5 mm s Te

ted to

Extra-high abraision resistance

Reduced water absorption

E N 13 8

imicrobi nt

y t o cle a

CG2 WA

with al ic pract le hand

Flexible, water- and dirt-repellent, cementitious tile grout with water-beading effect, meeting CG2 WA requirements to DIN EN 13 888, for grouting absorbent earthenware tiles, with first-rate joint-filling properties and washability (removability). Sopro DF 10 or Sopro Brillant® water-repellent tile grout are recommended for grouting low-suction tiling. Fine, smooth joint surface and high colour fastness provide tile f inish with lasting appeal. Particularly suitable for use in conjunction with floor heating and for wet and damp spaces. • Suitable for absorbent ceramics, e. g. earthenware • For 1 – 5 mm joint widths • For walls and floors, indoors and outdoors • Water- and dirt-repellent • Easy-clean • Antimicrobial • Crack-free curing • Good adhesion to joint faces • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Bag 15 kg Order no. 910-15 911-15 912-15 – 913-15 – – – – 917-15 – – – – – –

Colour white 10 light grey 16 silver grey 17 manhattan 77 grey 15 sandgrey 18 concrete grey 14 anthracite 66 black 90 parchment 27 jasmin 28 light beige 29 beige 32 beige bahama 34 anemone 35 balibrown 59

Packaging

Coverage: See page 41

Bag 5 kg Order no. 910-05 911-05 912-05 915-05 913-05 927-05 914-05 925-05 926-05 917-05 918-05 916-05 919-05 920-05 921-05 924-05

Packages/pallet

Pallet weight

Bag 15 kg with handle

1,050 kg

Bag 5 kg

200

1,000 kg

Sopro Saphir® 5 and Sopro Brillant® grouting colours

grey 15

sandgrey 18 Tile fixing products

white 10

light grey 16

silver grey 17

manhattan 77

stone grey 22

concrete grey 14

anthracite 66

black 90

See also application matrix for tile grouts on pages 48 – 49.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Sopro Brillant® Water-repellent tile grout 1 – 10 mm s Te

ted to

Extra-high abraision resistance

Reduced water absorption

E N 13 8

imicrobi nt

y t o cle a

CG2 WA

with al ic pract le hand

Flexible, water- and dirt-repellent, rapid-set, cementitious tile grout with water-beading effect, meeting CG2 WA requirements to DIN EN 13 888 and offering excellent workability, for grouting all ceramic coverings, cast stone, all types of natural stone, and glass mosaic. Fine, smooth joint surface, antimicrobial capability and high colour fastness guarantee a tile finish with lasting appeal. For swimming pools we recommend Sopro TF plus or Sopro TFb, Sopro FEP plus. Also for floor heating constructions. Sopro Saphir® 5 or Sopro DF 10 are recommended for grouting absorbant tiles. • Particularly suitable for low-suction ceramics, e. g. fully vitrified stoneware • For discoloration-sensitive natural stone • For 1 – 10 mm joint widths • Working life: 30 – 40 minutes • For walls and floors, indoors and outdoors • Water- and dirt-repellent • Easy-clean • Antimicrobial • Crack-free curing • Fine, smooth joint surface • Good adhesion to joint faces • With ship approval • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro PUK 503: MED approval no. 118.224 (wall) and 124.099 (floor), USCG approval no. 164.112/EC0736/118.224 (wall) and 164.117/EC0736/124.099 (floor) Licence – Very low emission according to GEV-Emicode EC1PLUS 1) – Very low emission according to GEV-Emicode EC1PLUS R

Bag 15 kg Order no. – 802-15 803-15 804-15 806-15 807-15 805-15 838-15 – – – 834-15 833-15 – –

Colour white 10 light grey 16 silver grey 17 grey 15 sandgrey 18 stone grey 22 concrete grey 14 anthracite 66 black 90 jasmin 28 light beige 29 beige bahama 34 jurabeige 33 brown 52 balibrown 59

Packaging

Coverage: See page 41

Only colours anthracite and black.

Pallet weight

Bag 15 kg with handle

1,050 kg

Bag 5 kg

200

1,000 kg

parchment 27

jasmin 28

light beige 29

beige 32

jurabeige 33

brown 52

chestnut 50

balibrown 59

See also application matrix for tile grouts on pages 48 – 49.

Packages/pallet

Bag 5 kg Order no. 801-05 802-05 803-05 804-05 806-05 807-05 805-05 838-05 839-05 831-05 832-05 834-05 833-05 835-05 837-05

beige bahama 34

For technical reasons, the colours shown here may diverge from those of the fully cured material.

anemone 35

Tile grouts

Tile grouts Sopro MFs Tile grout

Tile grouts

2 – 5 mm

ted to es

• 2 – 5 mm joint widths • For walls and floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII

CG1 N

E N 13 8

Cementitious tile grout, meeting CG1 requirements to DIN EN 13 888, particularly suitable for crack-free grouting of absorbent earthenware tiles. Tailored setting behaviour, water retentivity and washability (removability). Also suitable for grouting low-suction tiling. Provides particularly smooth, appealing joint finish. For use in living and food areas, dry and wet spaces. Also suitable for floor heating systems.

Order no. Colour

Packaging

Packages/pallet

Pallet weight

410-21

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Bag 25 kg

1,000 kg

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

410-05 431-21 430-21 430-05

silver grey 17

435-21

Sopro MFs+b

Cementitious tile grout, meeting CG1 requirements to DIN EN 13 888, particularly suitable for crack-free grouting of low-suction tiles. Tailored joint-filling properties, setting behaviour in joint, washability (remov ability) and strength. Also suitable for grouting absorbent tiling. Smooth, compact joint finish. For use in living and food areas, dry and wet spaces. Also suitable for floor heating systems.

435-05

3 –12 mm

CG1 E N 13 8

grey 15

• 3 – 12 mm joint widths • For walls and floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII

ted to es

Order no. Colour

Packaging

Packages/pallet

Pallet weight

Coverage: See page 41

539-21

grey 15

Bag 25 kg

1,000 kg

559-21

concrete grey 14

Bag 25 kg

1,000 kg

Sopro MFb

Cementitious tile grout, meeting CG1 requirements to DIN EN 13 888, particularly suitable for crack-free grouting of low-suction floor tiling with wide joints. Tailored joint-filling properties, setting behaviour in joint, washability (removability) and strength. Finely textured, homo geneous joint finish. For use in dry and wet spaces, commercial and industrial facilities. Also suitable for floor heating systems.

Tile grout

5 – 20  mm

ted to es

• 5 – 20 mm joint widths • For walls and floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII

CG1 N

E N 13 8

Coverage: See page 41 Tile fixing products

light grey 16

Coverage: See page 41

Tile grout

white 10

See also application matrix for tile grouts on pages 48 – 49.

Order no. Colour

Packaging

Packages/pallet

Pallet weight

535-21

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Bag 25 kg

1,000 kg

535-05 530-21

grey 15 concrete grey 14

Sopro TNF Natural stone grout with trass 5 – 40  mm

s Te

enish Rh

ted to

Extra-high abraision resistance

DI N

Reduced water absorption

EN 1

CG2 WA 38

Trass or

i g i n al

Rapid-set, trass-bearing, cementitious paving grout for grouting natural stone units and pavings in gardens and landscaped areas, and light- to medium-duty vehicular pavements. Also suitable for grouting coverings on balconies and patios with wider joints and rustic surface textures or for polygonal (crazy-pattern) tiling. With Rhenish trass and special protection to reduce risk of efflorescence. Also suitable for use in conjunction with floor heating. Particularly for coverings laid in crazy pattern. • Joint width: 5 – 40 mm • For walls and floors, indoors and outdoors • Rustic surface textures • Compressive strength ≥ 25 N/mm² • Especially for polygonal tiling • Resistant to suction sweeper loads • Resistant to high-pressure water jetting • For pointing facing masonry units • Frost- and dew-resistant • Early walkability and loadability • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: See pages 224 – 225

Order no. Colour

Packaging

Packages/pallet

Pallet weight

674-21

grey 15

Bag 25 kg

1,000 kg

675-21

pavement grey 13

Bag 25 kg

1,000 kg

677-21

sandgrey 18

Bag 25 kg

1,000 kg

676-21

anthracite 66

Bag 25 kg

1,000 kg

684-21

beige 32

Bag 25 kg

1,000 kg

Sopro TNF grouting colours

grey 15

pavement grey 13

sandgrey 18

anthracite 66

beige 32

silver grey 17

grey 15

concrete grey 14

Sopro MF grouting colours

white 10

light grey 16

See also application matrix for tile grouts on pages 48 – 49.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Tile grouts

Tile grouts Sopro FEP plus Epoxy tile grout, components A + B Tile grouts

2 – 12  mm

EN 120

E N 13 8

cement thro ug an nh

dition ad

itt

of pr

ed olour larly c free! u c i t r Pa lm me-fi and li

High loadability

Option al e

R2 RG

l d a n d s il v

Heavy-duty, two-component epoxy tile grout and adhesive, meeting RG requirements to DIN EN 13888 and R2 requirements to DIN EN 12004, for grouting ceramic tiles in areas exposed to aggressive waters, chemicals and acids (please consult resistance table in technical product information!), natural fats, high compressive loads and washing-out action. For same-colour bonding and grouting of glass and por celain mosaic or tesserae. For commercial and industrial facilities, laboratories, catering kitchens, swimming pools (thermal baths), balconies and patios, and in conjunction with floor heating. • Joint width: 2 – 12 mm • Attractive coloration lent by natural-coloured silica sands • Working life: approx. 45 minutes • Resistant to high mechanical loads • Smooth, easy workability • Optional enhancement through addition of Sopro gold and silver glitter • For walls and floors, indoors and outdoors • Approved as system component for shipbuilding applications (see pages 260 – 262) Test certificates Testing laboratory LGAI Technological Center S.A. – R2 to DIN EN 12004

BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro HPS 673 and Sopro FKM XL 444: MED approval no. 118.405 (wall) and 124.126 (floor), USCG approval no. 164.112/EC0736/118.405 (wall) and 164.117/EC0736/124.126 (floor) – Approval for shipbuilding as system component with Sopro DSF 423, Sopro‘s No.1 white rapid-set (order no. 997) and Sopro FEP plus: MED approval no. 118.406 (wall) and 124.127 (floor), USCG approval no. 164.112/EC0736/118.406 (wall) and 164.117/ EC0736/124.127 (floor)

These tables present approximate values calculated on the basis of practical application. The values may vary upwards or downwards due to the natural form of the flag and sett pavings. In case of doubt, trial laying of a sample area is recommended to determine coverage. Joints depth 30 mm. No liability may be construed and no claims shall be accepted in respect of these details.

Coverage: 2.0 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width; approx. 2.0 kg/m² for grouting and glueing of glass mosaic 2)

Order no. Colour 1509-05 translucent

Packaging

Packages/pallet

Pallet weight

Bucket 5 kg

360 kg

1501-05 white 10

Bucket 5 kg

360 kg

1504-05 silver grey 17

Bucket 5 kg

360 kg

1508-05 grey 15

Bucket 5 kg

360 kg

1503-05 stonegrey 22

Bucket 5 kg

360 kg

1502-05 anthracite 66

Bucket 5 kg

360 kg

1510-05 black 90

Bucket 5 kg

360 kg

1505-05 jurabeige 33

Bucket 5 kg

360 kg

1506-05 brown 52

Bucket 5 kg

360 kg

1507-05 balibrown 59

Bucket 5 kg

360 kg

Packaging

Packages/pallet

Pallet weight

Bucket 5 kg

100

500 kg

Sopro FEP plus grouting colours

The impact of all colours can be enhanced using Sopro Glitter in gold or silver!

translucent

white 10

silver grey 17

grey 15

black 90

jurabeige 33

brown 52

balibrown 59

Tile fixing products

Please consult resistance table in technical product information!

stone grey 22

For technical reasons, the colours shown here may diverge from those of the fully cured material.

anthracite 66

Protect from frost during transportation and storage.

Heavy-duty, two-component epoxy tile grout and adhesive, meeting RG requirements to DIN EN 13 888 and R2 T requirements to DIN EN 12 004, for grouting ceramic tiles in areas exposed to aggressive waters, chemicals and acids (please consult resistance table in technical product information!), natural fats, high compressive loads and washingout action. For same-colour bonding and grouting of glass and porcelain mosaic or tesserae. Also for regrouting washed-out, solid-surface joints on refurbishment/renovation contracts. For balconies and patios, commercial and industrial facilities, laboratories, catering kitchens and swimming pools (thermal baths), and in conjunction with wall and floor heating.

Sopro FEP Epoxy tile grout, Components A + B 1,5 – 12  mm

EN 120

R2 T RG High loadability

E N 13 8

• Joint width: 1.5 –12 mm • Working life: approx. 50 minutes • Resistant to high mechanical loads • Also suitable for bonding glass mosaic, glass tiles and ceramic tiles • For walls and floors, indoors and outdoors • Approved as system component for shipbuilding applications (see pages 260 – 262) Test certificates

Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro HPS 673 and Sopro FKM XL 444: MED approval no. 118.222 (wall) and 124.096 (floor), USCG approval no. 164.112/ EC0736/118.222 (wall) and 164.117/EC0736/124.096 (floor) – Approval for shipbuilding as system component with Sopro DSF 423 and Sopro‘s No.1 white rapid-set (order no. 997): MED approval no. 118.223 (wall) and 124.097 (floor), USCG approval no. 164.112/EC0736/118.223 (wall) and 164.117/EC0736/124.097 (floor)

Colour

Coverage: 2.0 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width; approx. 2.0 kg/m² for grouting and glueing of glass mosaic 2)

2 – 12  mm

EN 120

R2 T RG N

E N 13 8

Bucket 2,5 kg Order no.

white 10

501-50

501-01

silver grey 17

504-50

504-01

grey 15

508-50

508-01

anthracite 66

502-50

502-01

Packages/pallet

Pallet weight

Packaging Bucket 5 kg

300 kg

Bucket 2,5 kg

150 kg

Heavy-duty, three-component epoxy tile grout meeting RG requirements to DIN EN 13 888. Resin, curing agent and (0.06 – 0.2 mm graded) Sopro KQS 607 crystal quartz sand are mixed on site. For grouting ceramic tiles in areas exposed to aggressive waters, chemicals and acids (please consult resistance table!), natural fats, high compressive loads and washing-out action. For balconies and patios, commercial and industrial facilities, laboratories, catering kitchens and swimming pools (thermal baths). Particularly suitable for machine grouting. For same-colour bonding and grouting of glass and porcelain mosaic or tesserae.

Sopro FEP

Bucket 5 kg Order no.

High loadability

Mixing ratio 2.25 kg component A + 3.25 kg component B + 7.00 kg Sopro cristal quarz sand

• 2 – 12 mm joint widths • Working life: approx. 40 minutes • For walls and floors, indoors and outdoors • High mechanical resistance • For laying and grouting glass mosaic, glass tiles and ceramic tiles Test certificates Available upon request

Colour: grey 15

Coverage: 2.0 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width; approx. 2.0 kg/m² for grouting and glueing of glass mosaic 2) 1)

Please consult resistance table in technical product information!

Order no. Packaging

Packages/pallet

Pallet weight

Packaging comprises 4 × 5.5 kg: 604-42

Component A (sold in boxed form): 4 Buckets 2.25 kg

120 (30 cartons)

270 kg

604-44

Component B (sold in boxed form): 4 Buckets 2.25 kg

120 (30 cartons)

390 kg

These tables present approximate values calculated on the basis of practical application. The values may vary upwards or downwards due to the natural form of the flag and sett pavings. In case of doubt, trial laying of a sample area is recommended to determine coverage. Joints depth 30 mm. No liability may be construed and no claims shall be accepted in respect of these details.

Tile grouts

Tile grouts Sopro EAH 547 Tile grouts

Epoxy cleaning aid

Simplifies washing down and smoothing of epoxy-grouted joints as well as tool cleaning (such as Sopro FEP (plus)). • For indoor and outdoor use • Concentrate • For admixing with wash water • Reduces film formation on tiles • High coverage • Solvent-free

Order no. Packaging

Coverage: 50 – 100 ml per 10 ltr water

547-81

Bottle 1 ltr

547-70

Bottle 250 mltr

Sopro ESE 548

For removal of surface-dried or hardened epoxy resin film from t iling. Epoxy resin residue (film) can still be cleaned off days after application.

Epoxy film remover

• For indoor and outdoor use • Concentrate • For removal of film from smooth and slip-resistant tile coverings • For later cleaning of epoxy resin-grouted coverings

Order no. Packaging

Coverage: 200 – 300 ml per 10 ltr water

548-81

Bottle 1 ltr

548-70

Bottle 250 mltr (Only avialable in box with 4 pieces)

Sopro ELD 458

Liquid dispersion used to prepare static-dissipating, hydraulically setting, thin-bed tile adhesives and tile grouts. For static dissipation in:

Conductive dispersion

– operating theatres, computer rooms and offices – power stations, chemical plants – production and storage facilities subject to explosion hazards Test certificates Available upon request

Coverage: 1.25 kg for 25 kg grout mortar

Order no. Packaging

Sopro FUF

Easily workable pure-acrylic-based grout coating for durable c olouring of old, stained cementitious tile joints. Weather-resistant to DIN 18 363.

Colour coating for tile grouts

458-43

Packages/pallet

Pallet weight

approx. 248 kg

Canister 3.75 kg

• For walls and floors, indoors and outdoors • High coverage • High mechanical resistance • Ready-to-use • Water- and dirt-repellent Other colours upon request.

Order no. Colour

Coverage: approx. 20 m² for 15 × 15 cm tiles and 3 – 5 mm joint widths

Packaging

950-01

white 10

Bottle 0.3 ltr incl. sponge

951-01

silver grey 17

Bottle 0.3 ltr incl. sponge

952-01

grey 15

Bottle 0.3 ltr incl. sponge

953-01

anthracite 66

Bottle 0.3 ltr incl. sponge

Sopro FUF grouting colours white 10

Tile fixing products

Protect from frost during transportation and storage.

silver grey 17

grey 15

For technical reasons, the colours shown here may diverge from those of the fully cured material.

anthracite 66

Coverage chart Table 1 Ceramic (format) in cm

Joint length m/m²

1 × 1

190,0

2 × 2

90,0

5 × 5

35,0

10 × 10

19,5

10 × 15

16,2

10 × 20

14.5

11,5 × 24 (split tiles)

12.5

15 × 15

13.4

15 × 20

11.5

20 × 20

9.9

20 × 30

8.2

25 × 25

7.9

30 × 30

6.6

30 × 60

5.0

40 × 40

5.0

50 × 50

4.0

60 × 60

3.3

40 × 80

3.8

15 × 90

7.8

45 × 90

3.3

100 × 100

2.0

100 × 300

1.0

Table 1 First identify appropriate size in Ceramic tile size column. Read off joint length per m2 from second column. Table 2 Select required joint width from first column and joint depth from top row. Read off relevant coverage rate at intersection of selected column and row and multiply this by joint length value from Table 1. The product of the two values indicates the tile grout requirement per m2. Calculated example: Ceramic tile size:

10 × 20 cm

Joint length:

14.5 m/m²

Joint width: Joint depth:

4 mm 8 mm

Coverage rate:

Tile grout requirement: 14.5 × 48 = 696 g/m²

These tables present approximate values calculated on the basis of practical application. The values may vary upwards or downwards due to the natural form of the flag and sett pavings. In case of doubt, trial laying of a sample area is recommended to determine coverage. Joints depth 30 mm. No liability may be construed and no claims shall be accepted in respect of these details.

You may also wish to use the tile grout coverage calculator on our website at

www.sopro.com or in the Sopro App!

Tile grouts

How to determine grout requirement

Table 2 Joint width (mm)

Joint depth (mm) 5

Coverage factor (grammes) 2

22.5

31.5

40.5

49.5

58.5

67.5

37.5

52.5

67.5

82.5

97.5

105

112.5

108

117

126

135

52.5

73.5

94.5

105

115.5

126

136.5

147

157.5

108

120

132

144

156

168

180

67.5

94.5

108

121.5

135

148.5

162

175.5

189

202.5

105

120

135

150

165

180

195

210

225

82.5

115.5

132

148.5

165

181.5

198

214.5

231

247.5

108

126

144

162

180

198

216

234

252

270

This table presents approximate, practice-based values that may vary upwards or downwards. These figures shall therefore not be used as the unqualified basis for price calculations and Sopro Bauchemie GmbH shall accept no liability in this connection. For larger contracts, trial laying of a sample area is recommended to determine coverage. No liability may be construed and no claims shall be accepted in respect of these details.

Tile grouts

with fu n

static form gi

prevents mould attack

tion ula

Tile grouts

Sopro Sanitary Silicone

Elastic, high-grade silicone sealant for filling and sealing of p erimeter and movement joints in sanitary, living and commercial spaces and swimming pools. • For indoor and outdoor use • Acetic-curing • With fungicidal and fungistatic properties to DIN EN ISO 846 1) • Resistant to weathering, ageing and UV radiation • Excellent smoothing properties • Suitable for underwater applications (with Sopro Primer UW 025) • Colours offering perfect match for Sopro tile grouts Licence – Very low emission according to GEV-Emicode EC1PLUS

Colour

Order no.

Colour

Order no.

transparent 00

052-71

light beige 29

054-71

white 10

050-71

beige 32

058-71

light grey 16

037-71

beige bahama 34

053-71

silver grey 17

036-71

anemone 35

063-71

manhattan 77

033-71

jurabeige 33

032-71

grey 15

051-71

caramel 38

sandgrey 18

034-71

sahara 40

stone grey 22

035-71

brown 52

065-71

concrete grey 14

038-71

mahogany 55 NEW

066-71

basalt 64

030-71

balibrown 59 NEW

056-71

anthracite 66

060-71

ebony 62

069-71

black 90

061-71

deep blue 98

734-71

parchment 27

055-71

signal red 91

732-71

jasmin 28

062-71

wine red 92

733-71

057-71 NEW

064-71

Treated product according to biocide decree; please consult the current information at www.sopro.com

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Packaging

Packages/pallet

Pallet weight

1,080

approx. 334 kg

Cartridge 310 ml

Silicon grouting colours

transparent 00

white 10

light grey 16

silver grey 17

manhattan 77

grey 15

sandgrey 18

stone grey 22

concrete grey 14

basalt 64

anthracite 66

black 90

parchment 27

jasmin 28

light beige 29

beige 32

beige bahama 34

anemone 35

NEW

jurabeige 33

caramel 38

NEW

sahara 40

brown 52

chestnut 50

deep blue 98

signal red 91

wine red 92

NEW

balibrown 59

ebony 62 Tile fixing products

See also application matrix for sealants on page 47.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

mahogany 55

Tile grouts

prevents mould attack

Elastic silicone sealant for filling of perimeter andmovement joints in ceramic coverings in sanitary, living and commercial spaces. • For indoor and outdoor use • Acetic-curing • Excellent smoothing properties • With fungicidal and fungistatic properties to DIN EN ISO 846 1) • Colours offering perfect match for Sopro tile grouts

Tile grouts

static form gi tion ula

with fu n

Sopro Ceramic Silicone

Licence – Very low emission according to GEV-Emicode EC1PLUS

Colour transparent 00 white 10 light grey 16 silver grey 17 manhattan 77 grey 15 sandgrey 18 stone grey 22 concrete grey 14 basalt 64 anthracite 66 black 90

Order no. 782-71 780-71 784-71 783-71 778-71 781-71 889-71 877-71 785-71 725-71 773-71 886-71

Colour

Order no.

parchment 27 jasmin 28 light beige 29 beige 32 beige bahama 34 jurabeige 33 sahara 40 brown 52 chestnut 50 mahogany 55 balibrown 59 ebony 62

789-71 787-71 788-71 786-71 775-71 881-71 723-71 882-71 883-71 724-71 884-71 726-71

Treated product according to biocide decree; please consult the current information at www.sopro.com

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

static form gi

prevents mould attack

tion ula

with fu n

Sopro Marble Silicone

Packaging

Packages/pallet

Pallet weight

1,080

approx. 334 kg

Cartridge 310 ml

Elastic silicone sealant for filling of perimeter and movement joints in natural stone coverings. • For indoor and outdoor use • Neutral curing • For all types of natural stone • Good adhesion to joint faces • No migration staining around edges • Suitable for bonding mirrors • Excellent smoothing properties • No migration staining around edges • No priming required • Resistant to weathering, ageing and UV-radiation • With fungicidal and fungistatic properties to DIN EN ISO 846 1) • Colours offering perfect match for Sopro tile grouts Licence – Very low emission according to GEV-Emicode EC1PLUS Colour

Order no.

Colour

Order no.

transparent 00

790-71

concrete grey 14

799-71

white 10

791-71

light grey 16

891-71

basalt 64 anthracite 66

844-71 798-71

silver grey 17

792-71

black 90

797-71

grey 15

793-71

light beige 29

796-71

sandgrey 18

795-71

beige 32

842-71

stone grey 22

899-71

jurabeige 33

794-71

Treated product according to biocide decree; please consult the current information at www.sopro.com

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Packaging Cartridge 310 ml See also application matrix for sealants on page 47.

Packages/pallet

Pallet weight

1,080

approx. 342 kg

Tile grouts SoproDur® HF-D 817 Tile grouts

High-strength sealant

High loadability

Elastic, oxime-free, chemical-resistant sealant for sealing floor and peri meter joints exposed to high mechanical and chemical loads in warehouses, factory halls, workshops, washing facilities, catering kitchens and yard areas. • For outdoor use • High temperature resistance • Excellent chemical, ageing, UV and weathering resistance • Amenable to high-pressure cleaning • Oxime-free • Acetic curing

grey 15

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Order no. Colour

Packaging

817-71

Cartridge 310 ml

Sopro DA 049

Gunnable, acrylic dispersion-based sealant for plasto-elastic filling of perimeter joints between absorbent materials, e. g. concrete, masonry, plasterwork, timber, ceramics etc.

Acrylic sealant

grey 15

Packages/pallet

Pallet weight

1,080

approx. 368 kg

• For indoor and outdoor use • Overcoatable • Resistant to weathering • Low odour • Good resistance to UV-radiation • To close cracks in renders Licence – Very low emission according to GEV-Emicode EC1PLUS

white 10

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Order no. Colour

Packaging

049-03

Cartridge 310 ml

Sopro GM 026

Smoothing agent for clean and easy smoothing of silicone and acrylic Sopro sealants.

Smoothing agent

white 10

Tile fixing products

Protect from frost during transportation and storage.

Pallet weight

1,080

approx. 550 kg

• For indoor and outside use • Environmentally compatible • Biodegradable • Sold in convenient spray bottle

Order no. Packaging

Coverage: approx. 20 ml per metre joint

Packages/pallet

026-05

Canister 5 ltr

026-50

Spray bottle 0.5 ltr (only available in box with Nr 4)

For technical reasons, the colours shown here may diverge from those of the fully cured material.

NEW

Packages/pallet

Pallet weight

approx. 420 kg

480 (40 cartons)

approx. 273 kg

See also application matrix for waterproofings on page 47.

Sopro PUD 682 Polyurethane sealant

• For walls and floors, indoors and outdoors • Ready-to-use • Sag-resistant • Highly elastic • High weather resistance • Bonds excellently with wide variety of materials • Also suitable for wider joints • Bubble-free curing • Tack-free surface

High loadability

grey

Order no. Packaging

Coverage: 840 g for 3.1 m joint (10 × 10  mm)

682-73

672 kg

with fu n

Part icu la

Pallet weight

800 (40 cartons)

• For indoor and outdoor use • Acetic-curing • With fungicidal and fungistatic properties to DIN EN ISO 846 1)

table for la rg sui e rly

cts oje pr

tion ula

prevents mould attack

Packages/pallet

Elastic silicone sealant for filling of perimeter andmovement joints in ceramic coverings in sanitary, living and commercial spaces. For the application in swimming pools we recommend Sopro Sanitary Silicone.

Sopro Ceramic Silicone S static form gi

Aluminium sausage 840 g (à 600 ml) (only available in box with Nr 20)

tra

a ct-s e ct o r tr

Colour

white 10 light grey 16

Order no. NEW

695-84

NEW

991-84

silver grey 17

696-84

grey 15

697-84

Colour

Order no.

sandgrey 18 NEW stone grey 22 NEW concrete grey 14 NEW anthracite 66 NEW

992-84 995-84 699-84 998-84

Treated product according to biocide decree; please consult the current information at www.sopro.com

Packaging

Coverage: 400 ml for 3.8 m joint (10 × 10  mm)

Sopro Ceramic Silicone S grouting colours..

silver grey 17

grey 15

Packages/pallet

Pallet weight

960 (60 cartons)

approx. 450 kg

Aluminium sausage 400 ml (only available in box with Nr 12)

NEW

white 10

light grey 16

NEW

sandgrey 18

stone grey 22

concrete grey 14

anthracite 66

See also application matrix for waterproofings on page 47.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Tile grouts

Tile grouts Sopro Primer P 4050

Bonding primer for use in conjunction with Sopro Sanitary silicone, Sopro Marble silicone and SoproDur® HF-D 817 on concrete, cellular concrete, render, marble, granite and sandstone.

Tile grouts

• For indoor and outdoor use • One component • Especially for absorbing, open porous substrates

Coverage: approx. 5 ml/m joint for 10 mm joint depth

Sopro Primer

Order no. Packaging 021-71

Aluminium bottle 100 ml

Primer for the pretreatment of grout flanks on metallic substrates (e. g. stainless steal, copper...). Also suitable for marble, naturalstones artificial stones. • For inside and outside use • One component • Especially for metal substances

Coverage: approx. 2 ml/m joint for 10 mm joint depth

Sopro Primer UW 025

Coverage: approx. 4 ml/m joint for 10 mm joint depth

Sopro SB 113 Cut protection tape

Order no. Packaging 022-01

Aluminium bottle 100 ml

Primer for bonding enhancement of Sopro Sanitary silicone (in under water areas) and SoproDur® HF-D 817 on mineral absorbing substrates. • For indoor and outdoor use • For underwater areas • One component • Especially for absorbing, open porous substrates

Order no. Packaging 025-70

Aluminium bottle 250 ml

Protective, flexible, stainless-steel fabric tape. For reliable, long-term protection at perimeter and movement joints in waterproof membranes during cutting-out and renewal of silicone sealants. • Flexible • For indoor and outdoor use • Made from stainless steel (steel no. 1.4404) • Universal application for all types of waterproofing • Suitable for heavy-duty areas, e.g. swimming pools and catering kitchens

Coverage: approx. 1.05 m/m

Tile fixing products

Order no. Packaging 113-01

Roll (50 mm wide) 10 m

Tile grouts

Application matrix for Sopro sealants

Sopro Sanitary Silicone

Sopro Ceramic Silicone

Sopro Ceramic Silicone S

Sopro Marble Silicone

SoproDur® HF-D 817

Sopro DA 049

Sopro PUD 682

acetic-curing

neutral-curing

acetic-curing

Acrylate

Polyurethane

l l

Properties For indoor and outdoor use Curing Fungistatic to DIN EN ISO 846 Overcoatable Resistant to high-pressure cleaning equipment

For underwater applications

High loadability

EC1PLUS

Top quality level 4, line 12

-1, -2, -3, -4

-2, -3

-1, -3

-4

-1

-1, -2, -3, -4

Acrylic bathtubs/shower trays, sanitary

Aluminium

Concrete

EMICODE DGNB Application according to DIN 15 651

EC1PLUS

Substrates

Chrome

Stainless steel

Enamel

Glass

Wood, varnished & solvent-bearing

Wood, water-based systems

Wood, untreated

Wood, woodstained & solvent-bearing

Ceramics, glazed

Ceramics, unglazed

Plastics

Copper

Masonry

Brass

Natural/cast stone

Polyester

Aerated concrete

Plasterwork/render

Sandstone

Mirror

Zinc

l Suitable

l Pretreatment with suitable primer. Please observe current versions of product information, available at www.sopro.com

Tile grouts

Sopro DF 10® Designer tile grout

Sopro FL

Sopro Titec+ Tile grout

Sopro TFb Tile grout

Sopro Saphir® 5 Water-repellent tile grout

Sopro Brillant® Water-repellent tile grout

1 – 10 mm

2 – 20 mm

1 – 10 mm

3 – 30 mm

1 – 5 mm

1 – 10 mm

Binder

Cement

DIN EN 13 888

CG2 WA

EMICODE

EC1PLUS

EC1PLUS R

EC1PLUS (R)

l l

Generals Joint width

DGNB: highest quality level 4,  8 (see page 248)

Covering type Absorbent ceramics (earthenware tiles)

l 1)

l l

Stoneware, extruded tiles (split tiles)

l l

Fully vitrified stoneware

l l

Natural stone (discoloration-resistant)

l l

Natural stone (discoloration-sensitive)

l l

Cast stone

l l

Terracotta

l l

Glass and porcelain mosaic, tesserae, glass tiles, glass blocks

l l l l

l l l

Application Living areas, damp spaces

l l

Outdoors (facades, balconies, patios)

l l

Swimming pools/ underwater applications

l l

Heavy duty (e. g. commercial or industrial facilities)

l l

Heated substrates, e. g. with floor heating

l l

Resistance against acidic cleaners used in private households

l l

Tile fixing products

Trial grouting shall generally be performed.

l l

Adequately pre-wet earthenware tiles and their open joints.

l l

Tile grouts

Sopro FL Flexible tile grout

Sopro MFs Tile grout

Sopro MFs + b Tile grout

Sopro MFb Tile grout

Sopro TNF Natural stone grout with trass

Sopro FEP plus Epoxy tile grout

Sopro FEP

Sopro FEP 604

2 – 20 mm

2 – 5 mm

3 – 12 mm

5 – 20 mm

5 – 40 mm

2 – 12 mm

1,5 – 12 mm

2 – 12 mm

Cement

Epoxy resin

CG2 WA

CG1

CG2 WA

l l

EC1PLUS (R)

EC1PLUS R

l l

Three-component epoxy tile-grout, Special types

l l

l l l l

l l l

l l

l l only glass blocks

l l

l l l

l l

only glass blocks

l l

l l particularly recommended

l suitable

Surface fillers/renders

self-levelling

Sopro FS 15® plus 550 floor-levelling compound

Now up to 150 mm coat thickness

This is how we built the 1-m³ Sopro filigree cube

l Long

reactivatability ensures formation of unbroken surface

l Ready

to receive ceramic covering after only 2 – 3 hours

l Excellent

flow properties achieved by use of superplasticizing admixture

Tile fixing products

Surface fillers/renders

Pumpable, self-levelling, rapid-set, cementitious universal surface filler with excellent flow properties. Applied in thin coats upwards of 2 mm to level mineral substrates and produce smooth, plane, unbroken subfloor surfaces. Used as base for all types of floor c overing, e.g. ceramic, natural stone, textile, elastic and parquet flooring. Suitable for floor heating systems. Excellent workability and hardened mortar properties thanks to Mikrodur® technology. Optimum flow qualities by high performance liquefier.

Sopro FS 15 550

Floor-levelling compound

ted to es

CT-C35-F9 N

E N 13 8

pid-hard c Ra

3°

u rel. h

ess

ry system na

hrs. ready to receive ceramic covering

ckn

ent – te r em

After

% re l . h u

it y

2–3

it y

+23

R BIN D

≥ 2 mm t

ha or c ir re st

tant sis

E LIN

HIG H

S CRY TAL

SZ-T

• Coat thickness: 2 – 150 mm 1) • For floors, indoors • Rapid-setting • Long reactivatability: approx. 25 minutes • Extra-low-stress and extra-low cracking susceptibility • Excellent thermal cunductivity • Compressive strength after 28 days: approx. 35 N/mm² • Flexural tensile strenght after 28 days: approx. 9 N/mm² • Especially suitable for thin floor heating constructions • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Ready to receive ceramic covering: after 2 – 3 hours • Suitable perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Surface fillers/ renders

NEW

self-levelling

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Up to 150 mm in bonded construction.

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 550-21

Floor-levelling compound

ted to es

E N 13 8

After

it y

2–3

hrs. ready to receive ceramic covering

3°

ess

% re l . h u

1,000 kg

• Coat thickness: 0.5 – 5 mm • For floors, indoors • Compressive strength after 28 days: approx. 30 N/mm² • Flexural tensile strenght after 28 days: approx. 7 N/mm² • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Suitable perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

it y

ckn

ry system na

SZ-T

+23

HIG H

≥ 2 mm t

R BIN D

ent – te r em

pid-hard c Ra

ha or c ir re st

tant sis

E LIN

Pallet weight

CT-C30-F7

S CRY TAL

Packages/pallet

Cementitious, self-levelling, rapid-set, pourable filler compound in new, improved recipe composition for thin-coat application to produce particularly smooth surfaces and as skim coat to fill pores, hairline cracks etc. Ideal as base for textile, elastic and parquet flooring. Castor chair resistant when applied with min. 2 mm coat thickness. Suitable for floor heating systems. Excellent workability and hardened mortar properties thanks to Mikrodur® technology. Optimum flow qualities by high performance liquefier.

Sopro FS 5 549

Bag 25 kg

u rel. h

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 549-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders

N EW

self-levelling

Sopro VS 582 self-levelling filler Surface fillers/ renders

Just lay it on thick. 2-in-1: self-levelling and mouldable Flexible and fibre-reinforced Now up to 70 mm For simultaneous levelling and creation of falls For 3 â&#x20AC;&#x201C; 70 mm coat thicknesses

m ber sub

pid-hard c Ra

R BIN D

rates

HIG H

lls fa

inka

ent â&#x20AC;&#x201C; te r em

ry system na

Tile fixing products

shr

As levelling coat laid to falls

suitab l lso

o in g t

rl ay

E N 13 8

S CRY TAL

E LIN

CT-C35-F7 Fo

yin g to

w shrink Lo

ooth fille m

e ag

formulation

ted to 1) es

f-levellin el g

in bonded construction Rapid-setting For indoor and outdoor use Also suitable for timber flooring

SZ-T

Surface fillers/renders Sopro VS 582 Self-levelling filler

ls al

e ag

lls fa

rates

HIG H

inka

suitab l lso

R BIN D

shr

E LIN

m ber sub

pid-hard c Ra

ent – te r em

ry system na

Lower strengths are achieved for application as self-levelling filler due to higher mixing water requirement.

o in g t

S CRY TAL

External application only in con junction with suitable waterproof membrane or, as directly usable floor surface, finished with SoproDur® HF-L 513 high-strength epoxy protective coat.

le uitab Also s flooring ber for tim

E N 13 8

w shrink Lo

ooth fille m

yin g to f

rl ay

CT-C35-F7

formulation

ted to 2) es

f-levellin el

SZ-T

Flexible, self-levelling, mouldable, rapid-set, cementitious, fibrereinforced surface filler, with 2-in-1 formulation for simultaneous levelling and laying to falls. Excellent workability and mouldability through flexible addition of water. Floor-levelling compound for creation of smooth, unbroken surfaces to receive any flooring type, e.g. ceramic tiles, natural stone coverings, textile, elastic and parquet flooring. As surface gradient filler for application of levelling coat to falls of up to 4 % and production of level, plumb and true substrates for sub sequent installation of ceramic, natural and cast stone coverings. Suitable for use in damp and wet spaces, and on balconies and patios. 1) • Coat thickness: 3 – 70 mm 3) • For floors, indoors and outdoors 1) • 2-in-1 formulation: suitable as self-levelling filler and for laying to falls • Compressive strength after 28 days: approx. 35 N/mm² • Flexural tensile strength after 28 days: approx. 7 N/mm² • Self-levelling • Outstanding mouldability when laid to falls • Quick-drying • Fibre-reinforced • Pumpable • Suitable for floor heating systems • Suitable for timber flooring • Long working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Suitable perimeter insulation stripe • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Surface fillers/ renders

NEW

self-levelling

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.7 kg/m² per mm coat thickness

Order nr. Packaging 582-21

Heavy-duty floor-levelling compound

ted to es

High loadability

S CRY TAL

ry system na

ent – te r em

SZ-T

Coverage: approx. 1.7 kg/m² per mm coat thickness

E LIN

HIG H

E N 13 8

CT-C45-F11-A12 N

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Heavy-duty, pumpable, flow-applied, rapid-set, cementitious floor-levelling compound used to produce finished floor surfaces, e. g. for workshops, factory halls, warehouses/storerooms – particularly for trafficking by industrial and fork-lift trucks – garages, cellars etc. Also suitable as base for heavy-duty tile and natural stone coverings. Featuring Mikrodur® technology for exceptionally high strengths. Outdoors, Sopro HF-S 563 may be finished with Sopro HF-L 513 to improve surface properties. Optimum flow qualities by high performance liquefier.

Sopro HF-S 563

pid-hard c Ra

Up to 70 mm in bonded construction.

R BIN D

• Coat thickness: 4 – 40 mm, for thickness upwards of 10 mm may be extended with sand, e. g. graded 0 – 4 mm or 0 – 8 mm • For floors, indoors and outdoors • Compressive strength after 28 days: approx. 45 N/mm² • Flexural tensile strenght after 28 days: approx. 11 N/mm² • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Ready to receive floor covering: as finished floor surface: after 24 hours per centimetre coat thickness; for subsequent tiling: after 12 hours • Suitable perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Packaging 563-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Sopro FE 678

Rapidur® self-levelling screed

ted to es

E LIN

HIG H

S CRY TAL

R BIN D

ent – te r em

e ag

ratio n fro m

m oisture

bstrate

SZ-T

w shrink Lo

resistance gh

e -to-us Ready mix d scree

ry system na

Surface fillers/ renders

E N 13 8

pid-hard c Ra

DI N

CT-C25-F5-A12

shr

inka

self-levelling

Polymer-modified, ready-to-use dry mix for production of rapid-set screeds screeds allowing early flooring installation. Grade CT-C25-F5 to DIN EN 13 813. Suitable for heated screeds, bonded screeds and unbonded screeds (on separating or insulation layer). Used as base for all types of floor covering, e. g. ceramic, natural stone, textile and elastic flooring. Also suitable as directly usable finished floor surface, such as cellars. Allows early grinding. Excellent workability and hardened mortar properties thanks to Sopro Mikrodur® technology. Particularly useful for fast-track or tightly scheduled screed laying. • Ready for tiling: after approx. 24 hours • Self-levelling • Coat thickness for bonded screeds: 20 – 70 mm • Coat thickness for unbonded screeds: 35 1) – 70 mm • Coat thickness for insulation: 35 – 70 mm • For floors, indoors • Working life: 60 – 90 minutes • Walkable: after approx. 3 hours • Ideal for renovation and refurbishment • Suitable for a various number of floor heating systems • Heating system commissioning: after approx. 1 day • Pumpable, efficient use also on larger projects • Suitable perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: 19 – 20 kg/m² per cm screed thickness; 1,900 – 2,000 kg/m³ finished screed

NEW

Sopro FEW 698

Rapidur® self-levelling screed, white ted to es

E N 13 8

R BIN D

ent – te r em

e ag

ratio n fro m

bstrate

m oisture

SZ-T

w shrink Lo

resistance gh

e -to-us Ready eed mix scr white

ry system na

E LIN

HIG H

S CRY TAL

pid-hard c Ra

DI N

CT-C25-F5-A12

shr

inka

Coverage: 19 – 20 kg/m² per cm screed thickness; 1,900 – 2,000 kg/m³ finished screed

Tile fixing products

Order nr. Packaging 678-21

Bag 25 kg

Pallet weight

1,000 kg

Ready-to-use dry mix with white, ternary binder system and additives for production of grindable, self-levelling, rapid-set cement screeds. Grade CT-C25-F5 to DIN EN 13813. Suitable for heated screeds, bonded screeds and unbonded screeds (on separating or insulation layer). For subsequent grinding to create high-grade terrazzo effect. Also suitable as directly usable finished floor surface. Excellent workability and hardened mortar properties thanks to Sopro Mikrodur® technology. Particularly suitable for fast-track or tightly scheduled screed laying. • For indoor floors • Allows early grinding • High-grade terrazzo effect • Self-levelling • Excellent workability and flow properties • Coat thickness for bonded screeds: 20 – 70 mm • Coat thickness on separating layer: 35 – 70 mm • Coat thickness on insulation: 35 1) – 70 mm • Suitable for floor heating systems • Working life: 60 – 90 minutes • Walkable: after approx. 3 hours • High resistance to moisture migration back into screed • Pumpable • Grading: 0 – 4 mm • Suitable Sopro perimeter insulation strip on page 58 • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII. Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Packaging 698-21

Bag 25 kg

As special construction described in IWM e.V. (German Association of Factory-Made Mortar Manufacturers) data sheet „Self-levelling cement screeds“, for vertical live loads ≤ 2 kN/m².

Packages/pallet

Pallet weight

1,000 kg

See page 255 (Cementitious screed groups).

Surface fillers/renders

White, pumpable, flow-applied, self-levelling, rapid-set, alpha-hemi hydrate-based filler used to level out gypsum-based/calcium sulphate- based (anhydrite and self-levelling anhydrite) screeds and board subfloors and to produce smooth, level, unbroken surfaces for subsequent laying of all kinds of flooring, e.g. ceramic, natural stone, textile and elastic coverings. Also for use on mastic asphalt. Suitable for floor heating systems. Optimum flow qualities by high performance liquefier.

Sopro AFS 561

ted to es

CA-C25-F7 E N 13 8

• Coat thickness: 1 – 30 mm, for thickness upwards of 10 mm may be extended with (e. g. 0 – 2 mm graded) sand • For floors, indoors • Compressive strength after 28 days: approx. 25 N/mm² • Flexural tensile strenght after 28 days: approx. 7 N/mm² • Working life: approx. 40 minutes • Walkable: after approx. 3 hours • Suitable perimeter insulation stripe • Shrinkage-free

Surface fillers/ renders

Anhydrite floor-levelling compound

self-levelling

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging 561-21

suitab l lso

Fibre-reinforced self-levelling filler

R BIN D

rates

ent – te r em

pid-hard c Ra

HIG H

E LIN

m ber sub

ry system na

S CRY TAL

E N 13 8

CT-C30-F7 N

Packages/pallet

Pallet weight

1,000 kg

Flexible, flow-applied, self-levelling, rapid-set, cementitious, fibre- reinforced surface filler used to even out irregularities in timber and mineral substrates, especially on refurbishment/renovation contracts. Appropriate for castor chairs and floor heating systems.

Sopro FAS 551

ted to es

Bag 25 kg

SZ-T

• Coat thickness: 3 – 40 mm, for thickness upwards of 20 mm must be extended with (e. g. 0 – 4 mm graded) sand • For floors, indoors • Compressive strength after 28 days: approx. 30 N/mm² • Flexural tensile strenght after 28 days: approx. 7 N/mm² • Flexible • Working life: 20 – 30 minutes • Walkable: after approx. 2 hours • With ship approval • Suitable perimeter insulation stripe • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): − Approval for shipbuilding as system component with Sopro HPS 673, Sopro FKM XL 444 and Sopro TF+: MED approval no. 124.125, USCG approval no. 164.117/EC0736/124.125 (floor) – Approval for shipbuilding as individual product: MED approval no. 124.095, USCG approval no. 164.117/EC0736/124.095 (floor) Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 551-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Sopro DFS ambiento® self-levelling designer floor topping

HIG H

E N 13 8

CT-C40-F10-A12 N

S CRY TAL

E LIN

ted to es

R BIN D

pid-hard c Ra

Surface fillers/ renders

High loadability

ry system na

ent – te r em

SZ-T

self-levelling

Decorative, heavy-duty, self-levelling, rapid-set, one-component, cementitious designer floor topping for production of finished floor surfaces in commercial, retail and private facilities. Suitable for use in shops, boutiques, salesrooms, car showrooms, salons, offices, medical practices, lofts, restaurants, discotheques, living rooms, garages, storerooms, cellar spaces etc. Only suitable for professional floor coating by trade appli cators! • Coat thickness: 5 – 15 mm • For floors, indoors • Produces finished floor surface • Quick-drying • Unique, customized floor finishes • Compressive strength after 28 days: approx. 40 N/mm² • Flexural tensile strength after 28 days: approx. 10 N/mm² • Abrasion resistance class (Böhme test): A 12 • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Loadable as finished floor surface: after approx. 24 hours per cm coat thickness • Suitable for floor heating systems • Suitable perimeter insulation stripe • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII • DGNB (German Sustainable Building Council): Top quality level 4, Line 7 (see page 222) Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.7 kg/m² per mm coat thickness

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

963-21

white

Bag 25 kg

1,000 kg

964-21

silver

Bag 25 kg

1,000 kg

965-21

flanell grey

Bag 25 kg

1,000 kg

Sopro ambiento® floor colours white

Contract floor-levelling compound

SZ-T

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.6 kg/m² per mm coat thickness

E N 13 8

ry system na

pid-hard c Ra

DI N

S CRY TAL

HIG H

ted to es

E LIN

ent – te r em

• Coat thickness: 3 – 25 mm • For floors, indoors • Rapid-set • Compressive strength after 28 days: approx. 25 N/mm² • Flexural tensile strenght after 28 days: approx. 6 N/mm² • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Suitable perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII

CT-C25-F6

Tile fixing products

flannel grey

Self-levelling, pumpable, rapid-set, cementitious surface filler to produce smooth, level, unbroken surfaces for subsequent laying of all kinds of flooring. Suitable for floor heating systems.

Sopro OFS 543

silver

R BIN D

Order nr. Packaging 543-21

Bag 25 kg

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders

Pumpable, flow-applied, self-levelling, rapid-set, cementitious surface filler for production of smooth, unbroken surfaces prior to floor ing installation. Suitable for floor heating systems.

E N 13 8

pid-hard c Ra

SZ-T

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.6 kg/m² per mm coat thickness

NEW

R BIN D

• Coat thickness: 3 – 15 mm • For floors, indoors • Compressive strength after 28 days: approx. 20 N/mm² • Flexural tensile strenght after 28 days: approx. 5 N/mm² • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII

ry system na

ent – te r em

DI N

HIG H

CT-C20-F5

S CRY TAL

E LIN

Floor-levelling compound

Surface fillers/ renders

Sopro NSC 587

ted to es

self-levelling

SoproTex 568 Floor-levelling compound scrim

Order nr. Packaging 587-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Scrim made from high-strength, alkali-resistant, 76 mm long, nondirectional glass fibres, AR (alkali-resistant) glass to DIN 1259-1, as reinforcement for surface fillers. For permanent stabilization of vibration- and crack-prone substrates and stress relief in cementitious and sulphate-based levelling compounds. Glass-fibre scrim prevents cracking and optimizes strength of floor substrate construction. Suitable for new-build, refurbishment and renovation contracts. • For indoor and outdoor use • Straightforward application and rapid progress on site • High-performance reinforcement of surface fillers • Optimization of tensile and flexural tensile strengths • Alkali-resistant • Accommodation of dynamic loads • No floating-up of glass fibres • Outstandingly smooth surfaces achieved • Durable reinforcement, even in damp environments

Coverage: approx. 1.1 m²/m²

Order nr. Packaging 568-01

Roll (90 cm wide) 100 m

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

approx. 327 kg

Surface fillers/renders Sopro RDS 960 Perimeter insulation strip Height 50 mm

stable

Surface fillers/ renders

• Straightforward, reliable application • Eliminates sound transmission paths and restraint stresses at perimeter wall/floor joints • Straightforward, reliable corner detailing • Excellent adhesion to clean substrates • For indoor and outdoor use Size: 50 mm high, 5 mm thick, 40 mm bonded nonwoven

Order nr. Packaging 960-01

Sopro ERS 961 Perimeter insulation strip for screeds Height 100 mm

Carton (5 rolls à 20 m)

Packages/pallet

Pallet weight

approx. 35 kg

Self-adhesive perimeter insulation strip made from rotproof, nonwoven-backed, closed-cell polyethylene foam. Straightforward, reliable application. For incorporation at wall/floor junctions to prevent mortar bridges. Suitable for all types of cement and calcium sulphate-based screed. Particularly recommended for use in conjunction with Sopro Rapidur® FE 678 self-levelling screed. • Straightforward, reliable application • Eliminates sound transmission paths and restraint stresses at perimeter wall/floor joints • Straightforward, reliable corner detailing • Excellent adhesion to clean substrates • For indoor and outdoor use Size: 100 mm high, 8 mm thick, 40 mm bonded nonwoven

Order nr. Packaging 961-01

NEW

Level marker pin

Carton (5 rolls à 20 m)

Tile fixing products

Pallet weight

approx. 45 kg

Self-adhesive level marker pins for precise setting out of thicker surface filler and scraed coats, up to a height of 10 cm. Ideal for marking measurement points.

Order nr. Packaging

Packages/pallet

008-01

Carton à 18 pieces

008-02

Carton (10 Bags à 18 pieces)

Surface fillers/renders Sopro RAM 3 454

R BIN D

ooth fille m

rl ay

60 m Up to

lls

hours!

S CRY TAL

Ready for ceramic tiling after only

E LIN

HIG H

Renovation and levelling mortar

o in g t

Universal, sag-resistant, rapid-set, cementitious render and surface filler for smoothing, patching and rendering of wall and floor surfaces. For application to mineral substrates, e. g. concrete, aerated concrete and masonry. Excellent workability and mouldability. Ideal for renovation and refurbishment. Ready for tiling after only 2 hours. Suitable for use in damp and wet spaces, and on balconies and patios. Mortars rapid strength development allows early removal of uneven patches in filler coat using plasterers lattice plane. • Coat thickness: 3 – 60 mm 1) • For walls, floors and ceilings • For indoor and outdoor use • Excellent sag resistance, even with greater coat thicknesses • Working life: approx. 20 minutes • Walkable: after approx. 1.5 hours • Ready for tiling: after approx. 2 hours • Meets DIN EN 998-1 requirements, strength class CS IV • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

For single, full-surface application.

Coverage: approx. 1.5 kg/m² per mm coat thickness; as angle fillet/junction seal 0.4 – 0.5 kg/lfm

Sopro AMT 468 Levelling mortar with trass

enish Rh

Trass or

i g i n al

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging

Packages/pallet

Pallet weight

454-21

Bag 25 kg

1,000 kg

454-05

Bag 5 kg

200

1,000 kg

Universal, light-grey, sag-resistant, rapid-set, cementitious surface filler applied to walls and floors for patching and smoothing c oncrete, plasterwork, masonry and screed surfaces. Particularly suitable for application as levelling plaster/render and as levelling coat to provide falls in damp and wet spaces or on balconies, patios and steps/stairways. • Coat thickness: 2 – 30 mm • For walls and floors, indoors and outdoors • Trass-bearing • Working life: approx. 45 minutes • Walkable: after approx. 6 hours • Ready to receive floor covering: after approx. 12 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Order nr. Packaging 468-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,050 kg

Surface fillers/ renders

NEW

stable

Surface fillers/renders Sopro RS 462 Repair filler

stable

Grey, sag-resistant, rapid-set, cementitious surface filler for s moothing, patching, levelling and repairing concrete, plasterwork, masonry and screed surfaces. • Coat thickness: 1 – 10 mm, may be extended for larger coat thicknesses using (0 – 2 mm or 0 – 4 mm graded) sand and cement in proportions 1 : 1 : 1 • For walls, floors and ceilings, indoors and outdoors • Working life: approx. 30 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Surface fillers/ renders

Test certificates Available upon request

Coverage: approx. 1.2 kg/m² per mm coat thickness

Order nr. Packaging

Sopro SP 466

Lightweight levelling mortar

enish Rh

Trass or

i g i n al

Coverage: approx. 1.2 kg/m² per mm coat thickness

Sopro SSP Grinding filler for industrial application

Coverage: depends on application

Tile fixing products

Packages/pallet

Pallet weight

462-21

Bag 25 kg

1,000 kg

462-05

Bag 5 kg

200

1,000 kg

• Coat thickness: 2 – 30 mm • Flexible • For walls and floors, indoors and outdoors • Trass-bearing • Extra-low-stress susceptibility • Working life: approx. 30 minutes • Walkable: after approx. 2 hours • Ready to receive floor covering: after approx. 2 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Order nr. Packaging 466-21

Bag 25 kg

Packages/pallet

Pallet weight

1,050 kg

Rapid-set, industrial surface filler for fast, efficient coating of n atural and cast stone units. Particularly suitable for finishing stone units on grinding lines. • For indoor and outdoor use • For industrial use • Fine grinding possible after approx. 10 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Colour

Packaging

465-21

white

Bag 25 kg

1,000 kg

463-21

grey

Bag 25 kg

1,000 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

Surface fillers/renders

Sag-resistant, rapid-set, cementitious render and surface filler for smoothing, patching and rendering of wall and ceiling surfaces. For application to mineral substrates, e. g. concrete, aerated concrete and masonry. Excellent workability and mouldability. Ideal for renovation and refurbishment. Suitable for use in damp and wet spaces, and on balconies and patios. Ideal for renovation and refurbishment.

Sopro RAP 2 434

R BIN D

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 434-21

Sopro SBP 474 Swimming pool render

s o ol con

lls

S CRY TAL

R BIN D

tio

rl ayin g to

E LIN

HIG H

n«

Com pl i

»Swi

without hydrated lime

ooth fille m

t hee as

ZD with B dat es PCC-mortar

Bag 25 kg

Surface fillers/ renders

• Coat thickness: 2 – 20 mm (in smaller areas up to 40 mm) • For walls and ceilings, indoors and outdoors • Working life: approx. 20 minutes • Ready for tiling: after approx. 6 hours • Meets DIN EN 998-1 requirements, strength class CS IV • Low-chromate to Regulation 1907/2006 EC, Annex XVII

S CRY TAL

E LIN

HIG H

Renovation and levelling render

stable

Packages/pallet

Pallet weight

1,000 kg

Grey, sag-resistant, rapid-set, fibre-reinforced render and filler to DIN EN 998-1, Table 1, strength class CS IV, for rendering, patching and smoothing of wall, floor and ceiling surfaces in concrete, aerated concrete, pumice, clay, calcium-silicate and composite masonry. Particularly suitable as levelling plaster/render and surface gradient f iller in swimming pools and similar water-retaining structures. Complies with ZDB (Federation of the German Construction Industry) data sheet “Swimming pool construction – Guidance on design and workmanship for ceramic coverings in swimming pools“. • Coat thickness: 3 – 30 mm • Without hydrated lime/lime admixtures • For walls, floors and ceilings, indoors and outdoors • For permanently underwater applications • Compressive strength ≥ 20 N/mm² • Working life: approx. 20 minutes • Ready to receive covering: after approx. 4 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging 474-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Sopro G 620

y le v el Q 1 4

lit

–Q

White smoothing compound

c. to DIN E N

Surface fillers/ renders

96 3

e Ty p

stable

Brilliant white, low-stress, water-vapour-permeable, fineaggregate gypsum/polymer-based compound for creation of extremely smooth wall and ceiling surfaces on masonry, plasterwork, concrete and gypsum plasterboard substrates. Fills cracks, holes and joints. • For walls and ceilings, indoors • For joint filling without joint cover strips, type 4B to DIN EN 13 963 • Non-combustible material, reaction to fire A1 to DIN EN 13 501 Part 1 • High coverage • Straightforward application • Very smooth and allowing feathering (thinning) out at edges • Working life: approx. 45 minutes • Rapid drying in conjunction with long working life • Creamy consistency and extra-smooth workability • Crack-free and very easy to rub down • For finishes meeting all quality levels (Q1 – Q4)

Coverage: approx. 0.9 kg powder/m² per mm coat thickness

Order nr. Packaging

Sopro F 820

White, low-stress, water-vapour-permeable gypsum/polymerbased compound for filling large-area hollows in masonry, plasterwork, concrete and gypsum plasterboard substrates as well as joints between gypsum plasterboard panels. Also used to fill cracks, holes, joints and chases.

y le v el Q 1 4

lit

–Q

White filler compound

96 3

e Ty p

c. to DIN E N

Coverage: approx. 1.0 kg powder/m² per mm coat thickness

Packages/pallet

Pallet weight

620-20

Bag 20 kg

800 kg

620-04

Bag 5 kg

144

720 kg

• For walls and ceilings, indoors • For joint filling without joint cover strips, type 4B to DIN EN 13 963 • Non-combustible material, reaction to fire A1 to DIN EN 13 501 Part 1 • No sagging in greater coat thicknesses in conjunction with high filling power • Straightforward application and long working life • Early finishing and modelling thanks to rapid drying • High coverage • No additional filler coating required thanks to very high sag resistance on walls and ceilings • Working life: approx. 30 minutes • For finishes meeting all quality levels (Q1 – Q4)

Order nr. Packaging

Packages/pallet

Pallet weight

820-20

Bag 20 kg

800 kg

820-04

Bag 5 kg

144

720 kg

Quality levels achievable with Sopro gypsum filler compounds 1) Q 1

For surfaces not subject to visual requirements Basic surface filling, e.g. filling of butt joints between gypsum boards and overcoating of visible parts of fixings.

Q 2

For normal requirements placed on walls and ceilings Additional filler coating (fine finish) up to achievement of level, unbroken transitions. The resulting surface may, for example, serve as a base for medium- to coarse-textured wall coverings, e.g. (ingrain) wallpapers.

Q 3

For enhanced visual requirements placed on coated surface Wider filler application at joints and firm striking off up to stopping of pores. The resulting surface may, for example, be suitable for fine-textured wall coverings or matt, fine-textured paint/coated finishes.

Q 4

For highest requirements placed on walls and ceilings Additional coating and smoothing of full surface (coat thickness > 1 mm). The resulting surface may, for example, be suitable for smooth or textured wall coverings with gloss finish, e.g. metal or vinyl wallpaper, glaze coats, paints or other coatings, up to medium-gloss finish, and for high-quality smoothing techniques.. Under guidance paper no. 2 issued by Gypsum Board Industry Group of German Federal Association of Gypsum Industry

Tile fixing products

Surface fillers/renders Sopro USW 941 White universal filler

White, sag-resistant, rapid-set, cementitious filler for universal a pplication to fill, patch, smooth, mould and model indoor and outdoor surfaces. Ideal for renovation and refurbishment contracts.

Surface fillers/ renders

• Coat thickness: 1 – 10 mm • For walls, floors and ceilings • For indoor and outdoor use • Working life: approx. 30 – 45 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: approx. 1.2 kg/m² per mm coat thickness

Soprodur® Microcement void filler

Order nr. Packaging 941-05

Bag 5 kg

Packages/pallet

Pallet weight

200

1,000 kg

One-component, mineral microcement with special additives. For remedial filling of hollows and voids below tiling, fully vitrified stoneware, natural stone and vibrated floors. Consolidates porous bedding mortar. For application by impregnation, syringing or injection. • For indoor and outdoor use • For consolidation of tile coverings by eliminating voids and hollows in beds • Working life: approx. 60 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII Please observe requirements relating to tools and equipment to be used for mixing and application.

Order nr. Packaging

Coverage: depends on application

Sopro GH 564 Casting resin

Packages/pallet

Pallet weight

900-30

Box (6 bags à 5 kg)

450 kg

900-48

Bucket (12 × 0.5 kg bags), incl. measuring beaker

312 kg

High-fluidity, rapid-set, two-component acrylic resin system for structural bonding of cracks in screeds. Extended with silica sand, used for filling joints and defective areas and for levelling out irregularities. For bedding and fixing wall guards, angle sections, trim, nailing strips etc. • For indoor and outdoor use • For floors • Water-, weather- and chemical-resistant • Pot life may be adjusted as required (depending on q uantity of curing agent added): approx. 10 minutes where all curing agent added; approx. 20 minutes where 2/3 of curing agent added • Loadable: after approx. 1 hour

with 10 cross-dowels

Coverage: approx. 1.0 kg/dm³ Protect from frost during transportation and storage.

Order nr. Packaging 564-75

Pot 0.75 kg

Packages/pallet

Pallet weight

360

270 kg

N EW

Surface fillers/renders

Sopro SH 649 shaken resin

Sopro VarioFlieĂ&#x;Spachtel

Shaken Shaken Shakenâ&#x20AC;&#x201C; Shaken not stirred.

Surface fillers/ renders

2-in-1: selbst nivellierend und modellierbar faserarmiert und flexibel jetzt bis 70 mm

Shakeable crack and repair resin Fast, simple and neat application No need for mixing tools Low-odour 64

Tile fixing products

Surface fillers/renders NEW

Sopro SH 649 Shaken resin

Low-odour, rapid-set silicate resin for filling/structural bonding of screed cracks and dummy joints and for bedding and fixing wall guards, angle sections, trim etc. For adhesive bonding of concrete, ceramics, natural stone, wood, metal etc., both indoors and outdoors. Also suitable for minor repairs. Supplied in shakeable bottles for fast, simple and neat application.

Surface fillers/ renders

• For indoor and outdoor use • For floors • Fast, simple and neat application • No need for mixing tools • Solvent-free • Very high penetration • Rapid-set • Working life: 10 – 12 minutes • Overcoatable: after approx. 45 minutes • Low-odour Licence – Very low emission according to GEV-Emicode EC1PLUS R

With 10 cross-dowels

NEW

Coverage: depending on substrate roughness and application method

Order nr. Packaging

Cross-dowels

Stainless-steel cross-dowels for filling/structural bonding of screed cracks and joints.

649-01

Carton (3 combi packs à 600 ml)

Packages/pallet

Pallet weight

99 (33 cartons)

288 kg

Order nr. Packaging 097-01

Carton à 200 pieces

097-02

Carton (10 bags à 200 pieces)

Surface fillers/renders mm

…

Self-levelling fillers 0,5 – 5  mm

Surface fillers/ renders

Sopro FS 5® As skim coat for elastic coverings, parquet flooring and ceramics 3 – 15  mm

Sopro NSC 587 For production of smooth, unbroken surfaces for thin and medium-coat applications prior to flooring installation 3 – 25  mm

Sopro OFS 543 For production of smooth, unbroken surfaces for thin and medium-coat applications prior to flooring installation 2 – 150  mm 1) Sopro FS 15® plus Excellent flow properties combined with high reliability for thin coat thicknesses due to polymer modification; universal surface filler for thick and thin coats 3 – 70  mm 1)

Sopro VS 582 Self-levelling, mouldable, fibre-reinforced surface filler for simultaneous evening out, smoothing and laying to falls 20 – 70  mm 2)

Rapidur® FE 678 Self-levelling screed 4 – 40  mm

Sopro HF-S 563 Heavy-duty, flow-applied floor-levelling compound used to produce finished floor surfaces 3 – 20  mm

(up to 40 mm blended with sand)

Sopro FAS 551 Lightweight flow-applied surface filler for high coat thicknesses

Tile fixing products

Up to 70 mm (Sopro VS 582) rsp. 150 mm (Sopro FS 15® plus 550) in bonded construction.

See also product description on page 54.

150

Surface fillers/renders mm

5 – 15  mm

Sopro DFS Heavy-duty self-levelling surface filler for production of finished floor surfaces with decorative appeal, available in 3 colours

Surface fillers/ renders

1 – 30  mm

Sopro AFS 561 Flow-applied, alpha-hemihydrate-based surface filler used to level out calcium sulphate-based and mastic asphalt screeds

Stable surface fillers 1 – 10  mm

Sopro RS 462 Surface filler for smoothing, patching, levelling and repairing con crete, plaster/render, masonry and screed surfaces 3 – 60  mm 3) Sopro RAM 3 454 Universal render and filler for rapid smoothing, patching and rendering of wall and floor surfaces. Ideal for renovation and refurbishment. For application as levelling coat to falls, levelling render and plinth render, and for formation of angle fillets 2 – 30  mm

Sopro AMT 468 Grey surface filler with coarser-graded aggregate for patching and smoothing wall and floor surfaces. For application as levelling coat to falls and levelling render 2 – 20  mm

Sopro RAP 2 434 Cement render for rendering, patching and smoothing wall surfaces. Ideal for renovation and refurbishment 3 – 30  mm Sopro SBP 474 PCC mortar without hydrated lime admixtures for rendering, patching and smoothing wall surfaces, particularly in swimming pools and similar water impoundments 1 – 30  mm Sopro SP 466 Universal, rapid-set, synthetic resin-modified surface filler incorporating lightweight aggregate, for rapid progress on fast-track refurbishment/renovation schemes For single, full-surface application.

Surface fillers/renders

Sopro  FS 5® 549

floor-levelling compound

Sopro NSC 587 self-levelling filler

Sopro OFS 543

contract floor-levelling compound

Sopro FS 15® 550

floor-levelling compound

Sopro VS 582 self-levelling filler

Sopro Rapidur® FE678

Sopro HF-S 563

self-levelling screed

high-strength floorlevelling compound

Surface fillers/ renders

Generals Self-levelling

Base/binder

Cement

EMICODE

EC1PLUS R

0,5 – 5

3 – 15

3 – 25

2 – 150 12)

3 – 70 12)

20 – 70 1)

4 – 40

Compessive strength (N/mm²)

Flexural tensile strength (N/mm²)

Coat thickness (mm)

Use Indoors Outdoors

l 4)

Floors

l 4)

Working life

30 – 40 min.

60 – 90 min.

30 – 40 min.

Walkable

2 – 3 hours

approx. 3 hours

2 – 3 hours

Ready for ceramic covering

2 – 3 hours

approx. 24 hours

2 – 3 hours

3 – 4 hours

approx. 24 hours

approx. 12 hours

Walls Ceilings

Properties Castor chair resistant

Suitable for floor heating systems

High crystalline water binding capacity

Pumpable

Directly usable finish

l 4)

Covering material Carpet/parquet/linoleum/PVC/ vinyl 5)

Ceramics

Natural/cast stone

l up to 5 mm

l 8)

Substrates 2) Concrete surfaces/cement screeds Board subfloors 6) Magnesit screeds

Mastic asphalt screeds Wood Existing tile/terrazzo/natural and cast stone coverings

Calcium sulphate screeds

Masonry/composite masonry

Tile fixing products

1) Bonded 20 – 70 mm; on separating layer 35 – 70 mm; on insulation 35 – 70 mm. 2) Please observe technical product information on substrate preparation, relevant current standards and guidance papers, and any requirements regarding waterproofing or separating measures, or consult Sopro’s Technical Service team. 3) Measurement with CM tester and scuff sanding required. Residual moisture shall be ≤ 0.5 % CM for unheated floors and ≤ 0.3 % CM for heated systems. 4) For directly usable surface, finish Sopro VS 582 self-levelling filler and Sopro HF-S 563 high-strength floor-levelling compound with SoproDur® HF-L 513 high-strength epoxy protective coat. Installation of a waterproof membrane is required prior to any subsequent tiling. After scuff sanding and care treatment, coat Sopro Rapidur® FE 678 self-levelling screed with SoproDur® HF-L

Application matrix

anhydrite floorlevelling compound

Sopro FAS 551 fibre-reinforced self-levelling filler

Sopro ambiento® floor Design

Sopro RS 462 repair filler

self-levelling designer floor topping

Sopro RAM 3® renovation and levelling mortar

Sopro AMT 468 levelling mortar with trass

Self-levelling

Cement

EC1PLUS

EC1PLUS R

1 – 30

3 – 40

5 – 15

approx. 40 min.

20 – 30 min.

30 – 40 min.

approx. 3 hours

approx. 2 hours

2 – 3 hours

24 – 36  hours 3)

approx. 24 hours

renovation and levelling render

Sopro SBP 474

Sopro SP 466

swimming pool render

lightweight levelling mortar

Cement

Sag-resistant

Alpha-hemihydrate

Sopro RAP 2® 434

Cement

EC1 R 1 – 10

3 – 60 10)

EC1 R 2 – 30

2 – 20 11)

3 – 30

≥ 20

2 – 30

≥ 20

approx. 30 min.

approx. 20 min.

approx. 45 min.

approx. 20 min.

approx. 30 min.

approx. 1,5 hours

approx. 6 hours

approx. 4 hours

approx. 2 hours

approx. 6 hours

approx. 2 hours

approx. 12 hours

approx. 4 hours

approx. 2 hours

6 – 8 hours

l l

l up to 5 mm

l l l l

513 high-strength epoxy protective coat. 5) Please observe threshold values for residual moisture! 6) Please consult Sopro’s Technical Service team. 7) Two-coat treatment with Sopro EPG 522 epoxy primer and subsequent blinding with sand. 8) Subsequent installation of separating layer, e.g. Sopro FDP 558 tile insulation board ≥ 7 mm, required. 9) As levelling coat laid to falls. 10) For single, full-surface application. 11) Up to 40 mm for small-area application. 12) Up to 70 mm (Sopro VS 582) or 150 mm (Sopro FS 15 550) for bonded construction.

l l Recommended l Suitable

Surface fillers/ renders

Sopro AFS 561

Primers and bonding agents Sopro GD 749 Primer

Quick drying approx.

min

ETA

DANMARK

• For walls and floors, indoors and outdoors • Suitable for floor heating systems • Drying time: 10 minutes at +23 °C 1) • Solvent-free Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging

Packages/pallet

Pallet weight

749-99

Container 1,000 kg

–

749-91

Barrel 200 kg

–

749-85

Canister 25 kg

600 kg

749-44

Canister 10 kg 2)

600 kg

749-83

Canister 5 kg 2)

450 kg

Coverage: 100 – 200 g/m² undiluted

749-81

Bottle 1 kg

384

384 kg

Sopro SG 602

Special, solvent-free, one-component synthetic resin primer for highand variable-suction substrates. Dilutable with water to suit application. Specifically for calcium sulphate screeds when laying large-format fully vitrified stoneware units. Particularly suitable for subsequent application of mineral adhesives, surface fillers and waterproof membranes.

On gypsum and calcium sulphate- based substrates after approx. 12 hours.

NEW

Light-blue, solvent-free, fast-drying, synthetic resin primer for h ighor variable-suction substrates. For pretreatment of cement screeds, calcium sulphate-based screeds, board subfloors, gypsum plasterboard and gypsum fibreboard, lime/cement render, levelling material, waterproofings and gypsum plasterwork. Water-thinnable for application to high-suction substrates. Use Sopro GD 749 primer only in concentrated form with gypsumbound substrates or where overcoated by Sopro flow-applied floor-levelling compound. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2.

Primer sealer

also available as empty truss

• For walls ande floors, indoors • Specifically for calcium sulphate screeds when laying large-format fully vitrified stoneware units • Overcoatable: after 2 – 5 hours 3) • With sealing effect • Suitable for use in conjunction with floor heating • Solvent-free • GISCODE: D1 Licence – Very low emission according to GEV-Emicode EC1PLUS

Please observe technical product information.

Order nr. Packaging

Coverage: 50 – 150 g/m² depending on nature of substrate

Tile fixing products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

602-20

Canister 20 kg

600 kg

602-10

Canister 10 kg

600 kg

602-05

Canister 5 kg

450 kg

See also application matrix for tile adhesives on pages 75.

Primers and bonding agents Sopro HPS 673 Bonding primer

for indoor and outdoor use

Dark-grey, solvent-free polymer dispersion applied in thin coat as bonding layer to impervious, smooth and non-absorbent substrates prior to tilelaying. Also suitable as adhesion promoter on timber, mastic asphalt or magnesium oxychloride (magnesite) screeds and existing firmly adhering adhesive residue, lacquers/varnishes and PVC coverings. • For walls and floors, indoors and outdoors • Drying time: 1 – 2 hours • Suitable for floor heating systems • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262) • Water- and solvent-free Test certificates Available upon request

– Approval for shipbuilding as system component with Sopro FKM XL 444 and Sopro FEP: MED approval no. 118.222 (wall) and 124.096 (floor), USCG approval no. 164.112/EC0736/118.222 (wall) and 164.117/EC0736/124.096 (floor) – Approval for shipbuilding as system component with Sopro FKM XL 444 and Sopro FEP plus: MED approval no. 118.405 (wall) and 124.126 (floor), USCG approval no. 164.112/EC0736/118.405 (wall) and 164.117/EC0736/124.126 (floor) – Approval for shipbuilding as system component with Sopro FAS 551, Sopro FKM XL 444 and Sopro TF+: MED approval no. 124.125, USCG approval no. 164.117/ EC0736/124.125 (floor))

Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging

Packages/pallet

Pallet weight

673-10

Bucket 10 kg

640 kg

Coverage: approx. 150 g/m² depending on nature of substrate

673-05

Bucket 5 kg

400 kg

673-03

Bucket 3 kg

147

441 kg

673-01

Pot 1 kg

270

270 kg

Sopro MGR 637

Extra-low-emission, quick-drying, one-component reaction resin primer. Particularly suitable for calcium sulphate-based (anhydrite) screeds when laying large-format fully vitrified stoneware units and for stabilizing all types of absorbent and non-absorbent substrate.

Multi-purpose primer

• For indoor and outdoor use • Specifically for calcium-sulphate based screeds when laying largeformat fully vitrified stoneware units • Suitable for floor heating systems • Ready to use • Ready to receive covering: after 30 – 40 minutes • Water- and solvent-free • GISCODE RU 1 Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 175 g/m² Protect from frost during transportation and storage.

Order nr. Packaging 637-10

Canister 10 kg

See also application matrix for tile adhesives on pages 75.

Packages/pallet

Pallet weight

450 kg

Primers and bonding agents

BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic):

Primers and bonding agents Sopro EPG 522 Epoxy primer

Primers and bonding agents

Test certificate Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro QS 507, Sopro PU-FD 570/571, Sopro QS 511, Sopro‘s No.1 (order no. 400) and Sopro TFb: MED approval no. 118.316 (wall) and 124.115 (floor), USCG approval no. 164.112/EC0736/118.316 (wall) and 164.117/ EC0736/124.115 (floor)

Meets quality level 4 requirements (highest rating) under German Sustainable Building Council (DGNB) scheme, as system with national test certificate comprising Sopro EPG 522 epoxy primer (line 23) and Sopro PU-FD surface sealant (line 20).

Order nr. Packaging

Coverage: 300 – 500 g/m² depending on nature of substrate

Sopro ESG 868 Epoxy primer sealer

Packages/pallet

Pallet weight

280 kg

522-44 522-45

Bucket 10 kg (combipackage) Bucket 7.5 kg component Bucket 2.5 kg component Bucket 4 kg (combipackage) Bucket 3.0 kg component Bucket 1.0 kg component

168 kg

522-83 522-84

Solvent-free, two-component epoxy resin barrier coat for substrate pre paration, particularly suitable for application to freshly laid and/or damp screeds. May be applied to oily concrete substrates where previously cleaned. Excels by excellent wetting and adhesive properties on damp concrete/screed substrates and reduces risk of osmotic blistering by providing barrier against rising damp. Resistant to water, sea water, wastewater/sewage, diluted acids, alkaline solutions, mineral oils, fuels and lubricants. • For floors • Extra-hardwearing and chemical-resistant • Working life: approx. 30 minutes • For indoor and outdoor use • GISCODE RE 1

Order nr. Packaging

Coverage: 2 coats 0.6 – 0.9 kg/m² each = 1.2 – 1.8 kg/m²

Tile fixing products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

868-41 868-42

Bucket 18 kg (combipackage) Bucket 15.8 kg component Bucket 2.2 kg component

432 kg

Bucket 9 kg (combipackage) Bucket 7.9 kg component Bucket 1.1 kg component

432 kg

868-31 868-32

See also application matrix for tile adhesives on page 75.

Please consult our technical service.

Primers and bonding agents Sopro HE 449 Bonding emulsion

Polymer dispersion used as bonding layer for mineral surface fillers and plasters/renders (e. g. Sopro FS 15® plus floor-levelling compounds). For wet-on-wet application. For modification of mortars, screeds and slurries.

Primers and bonding agents

• For floors, indoors and outdoors • Straightforward application • Good bonding performance

Order nr. Packaging

Packages/pallet

Pallet weight

449-44

Canister 10 kg

600 kg

Coverage: 100 – 200 g/m² as bonding layer

449-43

Canister 5 kg

450 kg

449-81

Bottle 1 kg

384

384 kg

Sopro RS 648

Vibration slurry enish Rh

Trass or

i g i n al

• For indoor and outdoor use • Specially designed and ideally suited for vibrated floor systems • Strong adhesion/bonding for installed coverings • For large-format units (30 × 60 cm) laid using vibrated floor system • Particularly suitable for use in conjunction with floor heating • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Coverage: 0.8 – 0.9 kg/m² per mm coat thickness for slurry application Protect from frost during transportation and storage.

Order nr. Packaging 648-20

Bag 15 kg

See also application matrix for tile adhesives on page 75.

Packages/pallet

Pallet weight

600 kg

Primers and bonding agents Sopro HS 448 Bonding slurry with trass

enish Rh

Trass or

i g i n al

One-component, trass-bearing bonding and contact slurry for conventional tilelaying using thick-bed method. – As bonding layer between concrete and screed for laying of (bonded) screed – As bonding slurry for thick-bed laying between earth-moist mortar bed and tile or natural stone covering – As bonding layer in conjunction with Sopro DM 610 drainage mortar, Sopro DMX 619 drainage mortar eXtra or other porous screed types with single-size grading • For floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Primers and bonding agents

Test certificate Available upon request

Coverage: approx. 1.4 kg/m²

Order nr. Packaging

Sopro HSF 748

One-component, trass-bearing, polymer-modified bonding and contact slurry for laying of natural or cast stone coverings and paving units. – As bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. Particularly suitable for laying of tiles with low water absorption (fully vitrified stoneware) – As bonding layer applied to bedding mortar or substrate – As bonding layer for separate (bonded) screeds – As bonding layer in conjunction with Sopro DM 610 drainage mortar, Sopro DMX 619 drainage mortar eXtra or other porous screed types with single-size grading – For application in conjunction with Sopro TVM 858 thick-bed mortar with trass

Flexible bonding slurry with trass

enish Rh

Trass or

i g i n al

448-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Coverage: 1.0 – 1.5 kg/m² for powder application; 1.5 – 2.0 kg/m² for slurry application

Tile fixing products

Order nr. Packaging 748-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Application matrix

Sopro GD 749 primer

Sopro SP 602 primer sealer

Sopro HPS 673 Sopro MGR 637 Sopro EPG 522 bonding primer Multi-purpose Epoxy Primer primer (sanded)

Tile adhesives

Fillers

EC1PLUS

EC1PLUS R

l 2)

Cement screeds

Anhydrite screeds

l 3)

Sopro HE 449 Bonding emulsion 1)

Generals

DGNB: highest quality level 4, line 8 (see page 248)

Primers and bonding agents

EMICODE

Substrates

Mastic asphalt screeds

l 4)

Plasters, P II – P III

Gypsum- and anhydrite plasters, P IV – P V

Absorbent concrete

l 4)

Non-absorbent concrete

Old ceramic tiles

Terrazzo coverings

Old residues of carpet glue

Firm lacquers

Natural stone/concrete stone Gypsum plasterboards Wooden substrates

Metal

l l

l l 3)

For wet-on-wet substrate preparation (after short evaporation time of approx. 10 – 15 minutes, max. 30 minutes) prior to application of Sopro surface fillers, excluding Sopro FS 5 floor-levelling compound and Sopro AFS 561 anhydrite floor-levelling compound. No liquid Sopro HE 449 bonding emulsion shall remain on surface. Films that have already dried shall be removed. For further details, please consult technical product information on Sopro HE 449 bonding emulsion. 2) Sopro EPG 522 Epoxy Primer fulfills the highest requirements (level 4) of the German Sustainable Building council as a tested building system consisting of Sopro Epoxy Primer (row 17) and Sopro PU-FD sealing (row 15). 3) Please consider technical datasheet. 4) Also for use in diluted form. 1)

Waterproofings

Sopro TDS 823 turbo sealing slurry

Fasten your seatbelts. For indoor and outdoor use

MicroGum®Technology

S CRY TAL

For showers and swimming pools

Highly ﬂexible, crackbridging after only 6 hours

E LIN

HIG H

Withstands 3 bar water pressure after only 6 hours

Rapid-set

R BIN D

For balconies and patios 0°

Particularly recommended during cold season

to -

Very low emission according to GEV-Emicode EC1PLUS R

pid-hard c Ra 1)

Tile fixing products

ry system na

ent – te r em

SZ-T

Only powder component A.

Waterproofings

Two-component turbo sealing slurry

• For walls and floors, indoors and outdoors • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W1-E and W4-E to DIN 18 533, based on W2.1-E and W3-E (based on DIN 18 195 Parts 4 and 6) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Rapid-set (approx. 2 hours per coat) • Rainproof after only approx. 2 hours • Withstands 3 bar water pressure after only approx. 6 hours • Crack-bridging after only approx. 6 hours • Also suitable for cold season • Very low consumption rate • Water-vapour-permeable • Also suitable for structural waterproofing • For brush, roller, trowel and spray application • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro Bauchemie GmbH

MicroGum®Technology

C 0°

R BIN D

to -

ry system na

ent – te r em

pid-hard c Ra

E LIN

HIG H

S CRY TAL

SZ-T

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Packaging Only powder component A.

Coverage: approx. 1.6 kg/m² per mm coat thickness 1) Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

823-10

Duo Pack 20 kg: Bag 10 kg with powder component A

630 kg

823-44

Canister 10 kg with liquid component B

600 kg

823-01

Duo Pack 9 kg: Bag 4,5 kg with powder component A

200

900 kg

823-02

Canister 4,5 kg with liquid component B

405 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Waterproofings

High-performance, flexible, rapid-set, two-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable for use in wet spaces, swimming pools, and on balconies and patios. For structural waterproofing and internal coating of process water tanks with max. 10 m water depth. Twocomponent system ensures weather-independent drying. Maximum flexibility thanks to MicroGum® technology. Very low consumption rate. Creamy consistency allows smooth application.

Sopro TDS 823

Waterproofings Flexible, two-component, fibre-reinforced, cementitious sealing slurry. Suitable as waterproof membrane for use on balconies and patios, in showers, washrooms, toilets and swimming pools. For waterproofing of solid, strong existing tile coverings on balconies and patios (tile-on-tile). For internal coating of process water tanks with max. 6 m water depth.

Sopro DSF 423 Two-component flexible sealing slurry

• For walls and floors, indoors and outdoors • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Water-vapour-permeable • Fibre-reinforced • For brush, roller, trowel and spray application • Approved as system component for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII.

0°

Sopro Bauchemie GmbH

to -

Waterproofings

Test certificates BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro's No.1 white rapid-set (order no. 997) and Sopro FEP: MED approval no. 118.223 (wall) and 124.097 (floor), USCG approval no. 164.112/EC0736/118.223 (wall) and 164.117/EC0736/124.097 (floor) – Approval for shipbuilding as system component with Sopro's No.1 white rapid-set (order no. 997) and Sopro FEP plus: MED approval no. 118.406 (wall) and 124.127 (floor), USCG approval no. 164.112/EC0736/118.406 (wall) and 164.117/EC0736/124.127 (floor)

Order nr. Packaging

Coverage: approx. 2.0 kg/m² per mm coat thickness 1)

Tile fixing products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

423-23

Duo Pack 32 kg: 32 kg packaging comprises: Bag 24 kg with powder component A

960 kg

423-43

Canister 8 kg with liquid component B

480 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Waterproofings

nsumptio co

ate nr

Low

Rapid-drying, two-component, cementitious waterproof membrane

MicroGum®Technology

pid-hard c Ra

ent – te r em

R BIN D

• For walls and floors, indoors and outdoors • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W1-E and W4-E to DIN 18 533, based on W2.1-E and W3-E (based on DIN 18 195 Parts 4 and 6) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Very high coverage • Reliable, rapid drying • Highly flexible and bitumen-free • Withstands 2.5 bar water pressure after only approx. 6 hours • Rainproof after only approx. 3 hours • Crack-bridging after only approx. 6 hours • Water-vapour-permeable • Visual drying control through colour change • For brush, roller, trowel and spray application • Overcoatable and suitable as plastering/rendering background • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

ry system na

Lightg!e a r t X X e covera ally high

S CRY TAL

E LIN

HIG H

High coverage

SZ-T

n exceptio

0°

Sopro Bauchemie GmbH

to -

Test certificate Available upon request

Only powder component A.

Coverage: approx. 1.2 kg/m² per mm coat thickness 1)

Order nr. Packaging

Sopro SB 113

Protective, flexible, stainless-steel fabric tape. For reliable, longterm protection at perimeter and movement joints in waterproof membranes during cutting-out and renewal of silicone sealants.

Cut protection tape

Packages/pallet

Pallet weight

618-20

Combi package 20 kg

360 kg

618-09

Combi package 9 kg

270 kg

• Flexible • For walls and floors, indoors and outdoors • Made from stainless steel (steel no. 1.4404) • Universal application for all types of waterproofing • Suitable for heavy-duty areas, e.g. swimming pools and catering kitchens

Coverage: approx. 1.05 m/m Protect from frost during transportation and storage.

Order nr. Packaging 113-01

Roll (50 mm wide) 10 m

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Waterproofings

Flexible, high-coverage, rapid-drying, reactive, two-component, cementitious waterproof membrane. For waterproofing balconies and patios. For waterproofing of solid, strong existing tile coverings on balconies and patios (tile-on-tile). Also suitable for waterproofing external basement walls, for application to existing bitumen waterproofings, as horizontal damp-proof membrane on ground slabs, as negative-side (internal) membrane, for structural refurbishment, plinth waterproofing and damp-proof courses, for internal waterproofing of process water tanks with max. 10 m water depth. Excellent sag resistance for easier application. Maximum flexibility thanks to MicroGum® technology. Very low consumption rate and outstanding workability, even in unfavourable weather conditions.

Sopro ZR 618

Waterproofings Flexible, one-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable as waterproof membrane for use on balconies and patios, in showers, washrooms, toilets and swimming pools. For internal coating of process water tanks with max. 4 m water depth.

Sopro DSF 523 One-component flexible sealing slurry

• For walls and floors, indoors and outdoors • Based on action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action class W1-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Working life: approx. 2 hours • Drying time: approx. 4 hours per coat • Water-vapour-permeable • For brush, roller, trowel and spray application • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro Bauchemie GmbH

Waterproofings

Test certificates Available upon request

Coverage: approx. 1.4 kg/m² per mm coat thickness 1)

Order nr. Packaging

Sopro DSF 623

Flexible, quick-drying, one-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable as waterproof membrane for use on balconies and patios, in showers, washrooms, toilets and swimming pools. For internal coating of process water tanks with max. 4 m water depth.

One-component flexible rapid-set sealing slurry

Packages/pallet

Pallet weight

523-20

Bag 20 kg

1,000 kg

523-10

Bag 10 kg

700 kg

• For walls and floors, indoors and outdoors • Based on action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action class W1-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Working life: approx. 50 minutes • Quick-drying (approx. 2 hours per coat) • Also suitable for process water tanks • Water-vapour-permeable • For brush, roller, trowel and spray application • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro Bauchemie GmbH

Test certificates Available upon request

Coverage: approx. 1.4 kg/m² per mm coat thickness 1)

Tile fixing products

Order nr. Packaging

Packages/pallet

Pallet weight

623-20

Bag 20 kg

1,000 kg

623-10

Bag 10 kg

700 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Waterproofings

Sopro FDF ﬂexible sealing compound

Waterproofings

A proven, ready-to-use solution.

l l l l l l

Indoor, walls and ﬂoors Highly elastic liquid polymer waterproof coating Ready-to-use Quick-drying Suitable for ﬂoor heating systems For brush, roller, trowel and spray application

Standards-compliant! Also available in (light grey) contrast colour. Certiﬁed as system solution with many Sopro components.

Waterproofings Sopro FDF Flexible sealing compound

Highly elastic, crack-bridging, solvent-free, one-component liquid polymer waterproof coating. Applied to walls and floors as membrane in composite waterproofing systems with tile finish. Used in moisture-exposed spaces, e.g. bathrooms, showers, washrooms and sanitary facilities. • For indoor walls and floors • Water action classes W0-I and W1-I (floor/wall) and W2-I (wall) to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Ready-to-use • Quick-drying (1st coat: 1.5 – 2.5 hours, 2nd coat: 3 – 5 hours) • Contrast colour to help distinguish between coats • Suitable for floor heating systems • For brush, roller, trowel and spray application

Sopro Bauchemie GmbH

ETA

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

DANMARK

Standard colour

Waterproofings

with liant Comp 8 534 DIN  1

FDF 525

grey

Contrast colour

light grey

FDF 527

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Order nr. Colour

Packaging

525-20

grey

Bucket 20 kg

600 kg

527-20

light grey

Bucket 20 kg

600 kg

525-45

grey

Bucket 15 kg

600 kg

527-15

light grey

Bucket 15 kg

600 kg

525-43

grey

Bucket 5 kg

400 kg

Coverage: approx. 1,2 kg/m²; approx. 0,6 kg/m² per coat 1)

527-05

light grey

Bucket 5 kg

400 kg

525-46

grey

Bucket 3 kg

147

441 kg

527-03

light grey

Bucket 3 kg

147

441 kg

Sopro ADS 630

Complete waterproofing kit with all necessary, compatible p roducts for provision of waterproof barrier on walls and floors underneath ceramic tiles, particularly in showers and bathrooms.

Waterproofing kit

NEW

NEW NEW

Packages/pallet

Pallet weight

• Economical system solution • Ready-to-use products • Straightforward application • Includes application tips Consists of: 1 ltr Sopro GD 749 primer, 5 kg Sopro FDF flexible sealing compound, 5 m Sopro DB 438 sealing tape, 2 × Sopro DWF 089 flexibel sealing collar for walls, 1 × universal roller

Order nr. Packaging 630-01

Tile fixing products

Protect from frost during transportation and storage.

Bucket

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Packages/pallet

Pallet weight

approx. 220 kg

Waterproofings Solvent-free, unpigmented, two-component liquid epoxy resin. Applied as primer to stabilize friable mineral substrates and as a dhesion promoter on smooth substrates, e.g. metal, mastic asphalt and existing coatings. Applied as primer prior to laying large format tiles on gypsum-bound substrates. Used to provide seal and prevent action in cementitious substrates, to fill cracks, to grout joints around channels and floor drains/gullies and in capillary-breaking joints. Resistant to water, sea water, wastewater/sewage, alkaline solutions, diluted acids, salt solutions, mineral oils, fuels and lubricants. Used to seal capillaries in damp cementitious substrates to speed up laying of parquet, PVC etc.

Sopro EPG 522 Epoxy primer

Please consult resistance table! • For walls and floors, indoors and outdoors • Working life: approx. 30 minutes • Ready to receive floor covering: after 24 hours • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262). Test certificate Available upon request

Waterproofings

BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro QS 507, Sopro PU-FD 570/571, Sopro QS 511, Sopro‘s No.1 (order no. 400) and Sopro TFb: MED approval no. 118.316 (wall) and 124.115 (floor), USCG approval no. 164.112/EC0736/118.316 (wall) and 164.117/ EC0736/124.115 (floor)

Order nr. Packaging

Coverage: 300 – 500 g/m² depending on nature of substrate

Packages/pallet

Pallet weight

280 kg

522-44 522-45

Bucket 10 kg (combipackage) Bucket 7.5 kg component Bucket 2.5 kg component Bucket 4 kg (combipackage) Bucket 3.0 kg component Bucket 1.0 kg component

168 kg

522-83 522-84

For flexible and waterproof bridging of perimeter and movement joints in conjunction with Sopro PU-FD surface sealant system, e. g. in large kitchens and swimming pools. Self-adhesive protective tape with slits for easier application.

Sopro FDB 524 Flexible sealing tape 100 mm wide

Licence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.1 m/m

NEW

Order nr. Packaging 524-30

Roll (100 mm wide) 30 m

For flexible bridging and waterproofing of perimeter and movement joints between ground slab and masonry courses, between top edge of basement/ground slab and subsequent prefabricated construction, and for general movement joint types. For bridging at junctions with changes of material, e.g. between masonry and timber or drywall/ drylining assemblies.

Sopro FDB 524 Flexible sealing tape 350 mm wide

• Guarantees strong bond • Self-adhesive • With three-part backing film

Licence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.1 m/m Protect from frost during transportation and storage.

Order nr. Packaging 524-35

Roll (350 mm wide) 25 m

Please contact our technical department for technical advice.

Waterproofings Solvent-free, white-pigmented, two-component polyurethane liquid resin for waterproofing below ceramic coverings. Available in sag-resistant consistency (PU-FD 570) for wall application and self-levelling consistency (PU-FD 571) for floors. For areas subject to high loads, e.g. swimming pools, catering kitchens, commercial/industrial facilities, balconies and patios.

Sopro PU-FD Surface sealant

570 Wall 571 Floor

• For walls and floors, indoors and outdoors • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W0-I to W3-I to DIN 18 534, also under exposure to chemical loads (equivalent to Moisture Exposure Classes A, C and A0 to DIBt Construction Products List and ZDB data sheet) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Resistant to water, sea water and wastewater/sewage • Resistant to aqueous acids and alkaline solutions, salt solutions, and chlorinated, lime and thermal water • Crack-bridging • Offering low-temperature flexibility • Long-term loadability (dry up to +70°C, wet up to +40°C) • Resistant to weathering and ageing • Approved as system component for shipbuilding applications (see pages 260 – 262)

0°

Sopro Bauchemie GmbH

to -

with liant Comp 8 534 DIN  1

Please consult resistance table in technical product information!

Waterproofings

Order nr. Packaging

Coverage: 1.6 – 2.0 kg/m² 1)

Packages/pallet

Pallet weight

571-26

Bucket 26 kg (component A – floors)

312 kg

571-04

Bucket 4 kg (component B – floors)

48 kg

571-44

Bucket 10 kg (component A + B – floors)

280 kg

570-83

Bucket 5 kg (component A + B – walls)

210 kg

Liquid admixture for tinting Sopro PU-FD surface sealant to provide contrast colour for application of second membrane coat. To help distinguish between and keep check on different membrane coats.

Sopro PU-FD KF 572 Contrast colour for Sopro PU-FD

• Contrast colour in syringes to facilitate proportioning Test certificate Available upon request

Coverage: 5 ml/5 kg pro Sopro PU-FD

Tile fixing products

Protect from frost during transportation and storage.

Order nr. Packaging 572-01

Carton (6 syringes à 5 ml)

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Waterproofings Sopro AEB 640 Waterproofing and separating membrane Thickness: approx. 0.4 mm

Sopro Bauchemie GmbH

ETA

DANMARK

Thin-sheet, crack-bridging polypropylene-made waterproofing and separating membrane, faced either side with special nonwoven f abric. The nonwoven fabric ensures strong bond between waterproofing/separating membrane and cementitious tile adhesive. Ideal for trouble-free, flexible waterproofing of wall and floor surfaces beneath ceramic tiling in bathrooms, showers and wet spaces. Sopro Racofix® RMK 818 universal adhesive, Sopro Racofix® MKS 819 universal adhesive S or Sopro TDS 823 turbo sealing slurry used for waterproof bonding and sealing at joints between sheets. Particularly suitable for fast-track waterproofing on tightly scheduled constructions schemes. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2. • For walls and floors, indoors and outdoors • Water action classes W0-I to W3-I 2) to DIN 18 534, also under exposure to chemical loads (equivalent to BK A, C and A0 to ZDB data sheet) • Ready-to-use • Resistant to microorganisms • Waterproof • Flexible and crack-bridging • Alkali-resistant • Ageing-resistant and rotproof • Straightforward application • Thickness: 0.4 mm

Waterproofings

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

W3-I as special construction.

Order nr. Packaging

Packages/pallet

Pallet weight

approx. 267 kg

approx. 233 kg

Coverage: 1,00 – 1,05 m²/m²

640-01

Roll (100 cm wide) 30 m

640-02

Roll (100 cm wide) 10 m

Sopro AEB 148

Flexible sealing tape, faced either side with special nonwoven fabric, for trouble-free, flexible bridging and waterproofing of perimeter and movement joints. For use in conjunction with Sopro AEB 640 and Sopro AEB plus 639 waterproofing and separating membranes, Sopro sealing slurries, Sopro FDF flexible sealing compound and Sopro PU-FD surface sealant below ceramic and natural stone tiling.

Flexible sealing tape

NEW

• With flexible centre zone • For indoor and outdoor use Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging 148-02

Roll (120 mm wide) 50 m

148-01

Roll (120 mm wide) 10 m

See matrix of impact sound insulation and separating layer systems on page 100 – 101.

Waterproofings NEW

Sopro WDB 811 Bath/shower sealing tape

Flexible, self-adhesive bath/shower sealing tape made from high-grade polypropylene, faced either side with special nonwoven fabric. For watertight connection of bathtubs and shower trays to waterproof membrane. Sopro bath/shower sealing system allows straightforward implementation of many different and demanding installation options, e.g. for bathtubs and barrier-free (walk-in) or raised shower trays. • Rapid and straightforward application • Ready-to-use • With self-adhesive strip • Watertight integration of bathtub or shower tray in waterproof membrane • Alkali-resistant • Acts as vapour check • Silicone- and acrylic-compatible, ageing-resistant and rotproof Test certificate Available upon request

Order nr. Packaging 811-02

Roll (120 mm wide) 25 m

811-01

Roll (120 mm wide) 5 m

Waterproofings

Installation of barrier-free (walk-in) shower tray using Sopro bath/shower sealing system

Bath/shower sealing tape

Bath/shower multi-angle seal

Tile fixing products

Bath/shower angle seal

2 x Bath/shower multi-angle seal

Waterproofings NEW

Sopro WDE 812 Bath/shower angle seal

Flexible, self-adhesive bath/shower angle seal made from high-grade polypropylene, faced either side with special nonwoven fabric.. Internal angle with flexible expansion zone. For watertight connection of bathtubs and shower trays to waterproof membrane. Sopro bath/shower sealing system allows straightforward implementation of many different and demanding installation options, e.g. for bathtubs and barrier-free (walk-in) or raised shower trays. • Rapid and straightforward application • Ready-to-use • With self-adhesive strip • Internal angle with flexible expansion zone • Alkali-resistant • Acts as vapour check • Silicone- and acrylic-compatible, ageing-resistant and rotproof Test certificate Available upon request

NEW

Sopro WDM 813 Bath/shower multi-angle seal

812-01

Piece

812-02

Carton à 10 pieces

Flexible, self-adhesive, multi-purpose bath/shower angle seal made from high-grade polypropylene, faced either side with special nonwoven fabric. With flexible expansion zone. For watertight connection of bathtubs and shower trays to waterproof membrane. Sopro bath/shower sealing system allows straightforward implementation of many different and demanding installation options, e.g. for bathtubs and barrier-free (walk-in) or raised shower trays. • Rapid and straightforward application • Ready-to-use • With self-adhesive strip • Multi-purpose fitting with flexible expansion zone • Alkali-resistant • Acts as vapour check • Silicone- and acrylic-compatible, ageing-resistant and rotproof Test certificate Available upon request

Order nr. Packaging

NEW

Sopro WDS 814 Soundproofing tape

813-01

Piece

813-02

Carton à 10 pieces

Structure-borne-sound-isolating, self-adhesive soundproofing tape for bathtubs and shower trays. Sound insulation and elimination of sound transmission paths between bathtub/ shower tray edge and structural fabric. Soundproofing tape is fixed as additional sound insulation to bath/shower sealing tape after this has been applied. • Reduction of sound level • Easy fixing thanks to self-adhesive rear face • Soft, flexible material

Order nr. Packaging 814-01

Carton (10 rolls à 5 m)

814-02

Roll (50 mm wide) 5 m

Waterproofings

Order nr. Packaging

Waterproofings Sopro AEB plus 639 Waterproofing and separating membrane Thickness: approx. 1.1 mm

for balconies and patios

Waterproofings

• For walls and floors, indoors and outdoors • Based on action classes IA, IIA, IB and IIB to DIN 18 531 (based on Moisture Exposure Class B0 to ZDB data sheet) • Particularly suitable for balconies and patios • Waterproof, alkali-resistant • For laying large-format fully vitrified stoneware units outdoors • As separating layer to provide stress relief • Flexible and crack-bridging • Ready-to-use, no check on coat thickness required • Rapid and straightforward application • Resistant to microorganisms Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.00 m²/m²

Order nr. Packaging

Sopro AEB 641

Polypropylen-made sealing tape, faced either side with special nonwoven fabric, for trouble-free, flexible waterproofing of perimeter and movement joints. For use in conjunction with Sopro AEB 640 beneath ceramic tiling. Also applied over joints in Sopro AEB 640 and Sopro AEB plus 639. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2.

639-01

Sealing tape

ETA

DANMARK

Roll (100 cm wide) 15 m

Packages/pallet

Pallet weight

approx. 232 kg

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging

Tile fixing products

641-01

Roll (120 mm wide) 25 m

641-30

Roll (300 mm wide) 25 m

See matrix of impact sound insulation and separating layer systems on page 100 – 101.

Waterproofings

Sealing tape for internal angles

Preformed angles made from Sopro AEB 641 for trouble-free, f lexible waterproofing of perimeter and movement joints at internal angles. Installed in conjunction with Sopro AEB 641. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2.

Sopro AEB 643

Size: approx. 120 × 120 mm (AEB 642), approx. 110 × 110 mm (AEB 643)

Sopro AEB 642

Sealing tape for external angles

ETA

DANMARK

Waterproofings

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging

Sopro AEB 176 Vertical make-up piece left 20 mm/28 mm

642-01

Single item (internal)

643-01

Single item (external)

Preformed, flexible make-up pieces for reliable sealing at corners of screeds laid to falls in walk-in showers. Installed in conjunction with Sopro AEB 641 sealing tape. • For indoor and outdoor use • For reliable sealing at differences in levels • Available in standard heights of 20 mm and 28 mm Licence – Very low emission according to GEV-Emicode EC1PLUS

Sopro AEB 177 Vertical make-up piece right 20 mm/28 mm

ndard in sta m e l b a l Avai ts of 20 m heigh 28 mm and Order nr. Packaging 176-20

Single item (left) hight 20 mm

176-28

Single item (left) hight 28 mm

177-20

Single item (right) hight 20 mm

177-28

Single item (right) hight 28 mm

Waterproofings AEB 129

Sopro AEB® Wall/floor collar

AEB 130

ETA

DANMARK

Polypropylene-made wall and floor collar, faced either side with special nonwoven fabric, for reliable sealing of pipe penetrations and floor drains beneath ceramic tiling. For use in conjunction with Sopro AEB 640 and Sopro AEB Plus 639. Sopro AEB 129 till Sopro AEB 133 contain a flexible centre zone. For inside and outside use. European technical approval: System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2. Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

AEB 112

AEB 133

Waterproofings

AEB 131

AEB 132 Order nr. Packaging

AEB 645

Racofix® RMK 818 Racofix® universal adhesive

Coverage: approx. 1.4 kg/m² per mm coat thickness; end-to-end-fixing AEB 640 (5 cm): 30 – 40 g/rm; fixing AEB 641 (12 cm): 70 – 95 g/rm

Tile fixing products

Dimensions

External diametre of pipe

129-01

Single item

approx. 150 × 150 mm

10 – 30 mm

130-01

Single item

approx. 170 × 170 mm

32 – 55 mm

112-01

Single item

approx. 200 × 200 mm

50 – 75 mm

133-01

Single item

approx. 250 × 250 mm

75 – 110 mm

131-01

Single item (double hole) distance between holes: 40 mm

approx. 175 × 140 mm

10 – 16 mm each

132-01

Single item (double hole) distance between holes: 150 mm

approx. 300 × 150 mm

10 – 30 mm each

645-01

Single item

approx. 450 × 450 mm

10 – 350 mm

Ready-to-use, one-component universal adhesive for waterproof bonding at joints in Sopro AEB 640 and Sopro AEB plus 639 waterproofing and separating membranes, and for bonding at joints and junctions with Sopro AEB 641 sealing tape, Sopro AEB 148 flexible sealing tape, Sopro AEB 642/643 sealing tape for internal/external angles, Sopro AEB 176/177 vertical make-up pieces left/right, Sopro AEB 645 floor collars, and Sopro bath/shower sealing system. • For walls and floors, indoors and outdoors

Order nr. Packaging 818-71

Cartridge 310 ml (431 g)

Packages/pallet

Pallet weight

1,080

465 kg

Waterproofings Two-component flexible sealing slurry to ensure waterproof seal of joints of AEB 640 and AEB plus 639, and for fixing AEB sealing tape, internal/ external angles, wall and floor collars.

Sopro TDS 823 Two-component turbo sealing slurry

• For walls and floors, indoors and outdoors Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Sopro Bauchemie GmbH

MicroGum®Technology

C 0°

R BIN D

to -

ry system na

ent – te r em

SZ-T

Waterproofings

pid-hard c Ra

E LIN

HIG H

S CRY TAL

Only powder component A.

Coverage: approx. 1.6 kg/m² per mm coat thickness For bonding Sopro AEB 640 joints (5 cm lap) : 70 – 100 g/m; for bonding Sopro AEB 641 (12 cm): 180 – 240 g/m

Racofix® MKS 819 Universal adhesive S

ETA

Order nr. Packaging

Packages/pallet

Pallet weight

823-10

Duo Pack 20 kg: Bag 10 kg with powder component A

630 kg

823-44

Canister 10 kg with liquid component B

600 kg

823-01

Duo Pack 9 kg: Bag 4,5 kg with powder component A

200

900 kg

823-02

Canister 4,5 kg with liquid component B

405 kg

Ready-to-use, waterproof, self-levelling, one-component universal adhesive. For waterproof bonding at joints and junctions in Sopro AEB 640/ AEB plus 639 waterproofing and separating membranes, and for fixing Sopro AEB 641 sealing tape, Sopro AEB 642/643 sealing tape for internal/ external angles, Sopro AEB wall/floor collars, vertical make-up pieces, bath/shower angles and sealing tape. Also for waterproof bonding at laps with Sopro DB 438 sealing tape, DBF 638 pre-folded sealing tape and Sopro DE 014/015 sealing tape for internal/external angles. Test certificates Available upon request

DANMARK

Coverage: approx. 1.4 kg/m² per mm coat thickness; end-to-end-fixing AEB 640 (5 cm): 35 – 45 g/rm; fixing AEB 641 (12 cm): 80 – 105 g/rm Protect from frost during transportation and storage.

Order nr. Packaging

Packages/pallet

Pallet weight

819-70

Bucket 350 g

1,200

420 kg

819-01

Bucket 1,4 kg

524

734 kg

Waterproofings Sopro DB 438 Sealing tape

System-tested, alkali-resistant, expansible, nonwoven-backed, high-performance sealing tape. For reliable, flexible bridging and waterproofing of perimeter and movement joints. Guarantees strong bond with Sopro waterproofing systems. Easy bedding of sealing tape due to flexible expansion zone. • For indoor and outdoor use • Flexible expansion zone • With printed scale for extra convenience

Waterproofings

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging

Sopro DBF 638 Pre-folded sealing tape

Packages/pallet

Pallet weight

438-04

Roll 50 m (150 mm wide)

100

approx. 252 kg

438-01

Roll 50 m (120 mm wide)

100

approx. 192 kg

438-02

Roll 10 m (120 mm wide)

392

approx. 150 kg

438-03

Roll 50 m (100 mm wide)

100

approx. 172 kg

System-tested, alkali-resistant, expansible, nonwoven-backed, pre-folded, high-performance sealing tape. For reliable, flexible bridging and waterproofing of perimeter and movement joints. Central fold facilitates bedding of sealing tape. • For indoor and outdoor use • Flexible expansion zone • Pre-folded • With printed scale for extra convenience Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging

Tile fixing products

Packages/pallet

Pallet weight

638-01

Roll 50 m (120 mm wide)

100

approx. 190 kg

638-02

Roll 10 m (120 mm wide)

392

approx. 165 kg

Waterproofings Sopro DE 014 Sealing tape for internal angles

Sopro DE 015 Sealing tape for external angles

Preformed Sopro sealing tape angles for trouble-free, flexible water proofing of perimeter and movement joints at internal a ngles. Installed in conjunction with Sopro DB 438/DB 638 sealing tape. • For indoor and outdoor use Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Sopro DWF 089 Flexible sealing collar for walls

014-01

Single item (internal)

015-01

Single item (external)

Flexible, alkali-resistant collar used in installation of waterproofing systems for reliable sealing of 10 – 30 cm pipe penetrations below tiling. With flexible centre zone. Ideal adhesion to Sopro waterproofing systems. • For indoor and outdoor use • With flexible centre zone Size: approx. 120 × 120 mm Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging 089-01

Single item

Sopro DMB 091

Collar used in installation of waterproofing systems for reliable sealing of up to 250 mm dia floor drains/gullies below tiling.

Sealing collar for floors

Size: 400 × 400 mm Test certificate Available upon request

Order nr. Packaging 091-71

Single item

Waterproofings

Order nr. Packaging

Application matrix waterproofings DIN standard

DIN 18 534 Waterproofing for indoor applications

Waterproofing of tanks and pools

IIA

IIB

High thermal loads, high mechanical action

High thermal loads, moderate mechanical action

Moderate thermal loads, high mechanical action

Moderate thermal loads, moderate mechanical action

W0-I

W1-I

W2-I

W3-I

Low water action

Moderate water action

High water action

Very high water action

W1-B

W2-B

≤ 5 m filling level

≤ 10 m filling level

Sopro DSF 423 two-component flexible sealing slurry

Sopro DSF 523 one-component flexible sealing slurry

l 2)

l 3)

Sopro DSF 623 one-component flexible rapid-set sealing slurry

l 2)

l 3)

Sopro TDS 823 two-component turbo sealing slurry

Sopro ZR 618 reactive waterproof membrane

l 4)

(Water) action class

Waterproofings

DIN 18 535

DIN 18 531 Waterproofing of roofs, balconies and walkways

Sopro FDF 525/527 flexible sealing compound

Sopro PU-FD 570/571 surface sealant for walls/floors

Sopro AEB 640 waterproofing and separating membrane

Sopro AEB 639 plus waterproofing and separating membrane

SoproThene® 878 bitumen sheet membrane

l 7)

In line with DIN standard

l 5)

l 6)

l As special construction

Up to max. 6 m filling level. 2) To ZDB (Federation of the German Construction Industry) data sheet. 3) Up to max. 4 m filling level. 4) Not suitable for swimming pools. Only suitable for containers, not for composite (membrane plus tile finish) waterproofings. 5) W2-I only on walls. 6) Also under exposure to chemical action, for all water action classes. 7) Not on roof surfaces above occupied spaces. 1)

Tile fixing products

l 1)

Shelf module for roll products

Waterproofings

Sopro DBF 638 pre-folded sealing tape, Sopro DB 438 sealing tape, Sopro AEB 641 sealing tape, Sopro fixing tape, Sopro FDB 524 flexible sealing tape

Sopro AEB 640 waterproofing and separating membrane

Sopro AEB plus 639 waterproofing and separating membrane

Sopro WEV 579 polyester nonwoven

Sopro TEB 664 impact sound insulation and separating layer

Accessories Sopro FDP 558

insula t nd

10dB

up to

• For indoor use • Increases flexural strength, impact sound and thermal insulation as well as relieving stress when refurbishing wooden floors • Improves thermal insulation on poorly insulated floating and s eparate (bonded) screeds • Stress relief on fresh concrete surfaces susceptible to shrinkage, screeds and mixed substrates with a tendency to crack • As insulation underneath retrofitted electric floor heating s ystems to accelerate the heat build-up and increase the heating capacity • To compensate tile level when laying tile-on-tile • In conjunction with brush-on waterproof coatings for bathroom refurbishments • In conjunction with flexible sealing slurries and scrim for b alcony and patio refurbishments • Complies with Heat Conductivity Group 060 for thermal insulation materials • Formaldehyde-free • Size 60 cm × 100  cm

n io

Sou

Tile insulation board 2 mm, 4 mm, 7 mm, 9 mm, 12 mm

in s ula

Synthetic-resin-bonded polyester fibreboard in 2 mm/4 mm/7 mm/9 mm/ 12 mm thicknesses for sound and thermal insulation in conjunction with ceramic and natural stone coverings, and for stress relief on critical or deformation-prone substrates. Also suitable underneath carpets, parquet floorings and elastic floor coverings made of PVC, rubber, linoleum etc.

Test certificates Available upon request Lincence – Very low emission according to GEV-Emicode EC1PLUS

Thermal resistance: FDP 558, 2 mm

0.039 m² K/W

FDP 558, 4 mm

0.042 m² K/W

FDP 558, 7 mm

0.088 m² K/W

FDP 558, 9 mm

0.095 m² K/W

FDP 558, 12 mm

0.127 m² K/W

Thermal conductivity: FDP 558, 2 mm

0.0511 W/mK

FDP 558, 4 mm

0.0954 W/mK

FDP 558, 7 mm

0.0793 W/mK

FDP 558, 9 mm

0.0950 W/mK

FDP 558, 12 mm

0.0944 W/mK

Impact sound reduction: FDP 558, 2 mm

up to 8 dB 1)

FDP 558, 4 mm

up to 10 dB 1)

FDP 558, 7 mm

up to 10 dB 1)

FDP 558, 9 mm

up to 10 dB 1)

FDP 558, 12 mm

up to 10 dB 1) Order nr. Packaging

Pieces/pallet

Pallet weight

2 mm separating board: 558-02

Box 18 m² (30 boards)

approx. 144 kg

558-92

Pallet (loose on pallet) 240 m²

400

approx. 192 kg

4 mm separating board: 558-04

Box 9 m² (15 boards)

approx. 261 kg

558-94

Pallet (loose on pallet) 120 m²

200

approx. 348 kg

7 mm universal underlay and insulation board: 558-07

Box 7.2 m² (12 boards)

approx. 324 kg

558-97

Pallet (loose on pallet) 72 m²

120

approx. 324 kg

9 mm universal underlay and insulation board: The impact sound reduction is tested according to DIN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site.

Tile fixing products

558-05

Box 6 m² (10 boards)

approx. 378 kg

558-95

Pallet (loose on pallet) 60 m²

100

approx. 378 kg

12 mm comfort insulation board: 558-12

Box 4.2 m² (7 boards)

approx. 353 kg

558-98

Pallet (loose on pallet) 48 m²

approx. 404 kg

See matrix of impact sound insulation and separating layer systems on page 100 – 101.

Accessories Sopro TDP 565 Impact sound insulation board

insula t nd

16dB

up to

n io

Sou

8 mm

in s ula

Synthetic resin-bonded polyester fibreboard with rubber sandwich coating for specially high demands on impact sound insulation in conjunction with ceramic/natural stone floor coverings. For use in stair constructions in multi-storey residential buildings and on poorly insulated floor surfaces. As a separating layer in refurbishment of old wood-board flooring and old tiled surfaces or thermal insulation in refurbishment/renovation of indoor areas. Also for insulation underneath electric floor heating systems. • For indoor use • Depending on slab construction, up to 16 dB 1) impact sound reduction below ceramic tiles • Up to 16 dB* impact sound reduction under ceramic surfaces • Improvement of thermal insulation on poorly insulated screeds or separate (bonded) screeds • Stress relief on fresh concrete surfaces with a risk of shrinkage as well as on screeds or mixed substrates with a tendency to crack • For life loads up to 3 kN/m • Low construction height • Formaldehyde-free • Thickness 8 mm • Size 60 cm × 100 cm Test certificate Available upon request Lincence – Very low emission according to GEV-Emicode EC1PLUS

The impact sound reduction is tested according to DIN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site.

Order nr. Packaging 565-08

Sopro TEB 664 Impact sound insulation and separating layer

insula t nd

17dB

up to

n io

Sou

3 mm

in s ula

Box 3 m² (5 boards)

Packages/pallet

Pallet weight

approx. 253 kg

Recycled granulated rubber sheet with exceptionally low construction height, for improvement of impact sound insulation p erformance below ceramic tiling. Sopro TEB 664 is butt-jointed and bonded to existing substrate using flexible Sopro thin-bed or floating-bed adhesives. Also suitable for use in conjunction with hot-water floor heating systems and as separating layer in both new-build and refurbishment works. • For indoor use • Depending on slab construction, up to 17 dB 1) impact sound reduction below ceramic tiles • Improves thermal insulation on poorly insulated screeds or on separate (bonded) screeds • Provides stress relief on newly laid, shrinkage-prone concrete s urfaces, crack-prone screeds or composite substrates • Alkali-resistant • Formaldehyde-free • For life loads up to 3 kN/m² • Exceptionally low construction height: 3 mm thick • Low weight per unit area: approx. 3.1 kg/m² • Size 1 m × 10 m (10 m²) Test certificate Available upon request Lincence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.0 m²/m²

Order nr. Packaging 664-01

Roll (100 cm wide) 10 m

See matrix of impact sound insulation and separating layer systems on page 100 – 101.

Packages/pallet

Pallet weight

approx. 630 kg

Accessories

Accessories Sopro AR 562 Scrim

Alkali-resistant, plastic-sheathed glass silk fabric for embedding in plasters, renders, fillers, thin-bed mortars, sealing slurries and bituminous waterproof coatings to increase crack resistance. Used to reinforce joints between boards and at perimeter junctions with other building materials when using Sopro FDP 558 tile insulation board, Sopro TDP 565 impact and sound insulation board or Sopro TEB 664 impact sound insulation and separating layer. • For indoor and outdoor use • Mesh size: 4 mm × 4 mm

Order nr. Packaging

Packages/pallet

Pallet weight

562-01

Roll (100 cm wide) 50 m

approx. 244 kg

Coverage: approx. 1.1 m²/m²

562-02

Roll (100 cm wide) 10 m

100

approx. 175 kg

562-03

Roll (20 cm wide) 50 m

150

approx. 244 kg

Sopro RDS 960

Perimeter insulation strip

Accessories

• Self-adhesive • Straightforward, reliable application • Eliminates sound transmission paths and restraint stresses at perimeter wall/floor joints • Straightforward, reliable corner detailing • Excellent adhesion to clean substrates • For indoor and outdoor use Size: 50 mm high, 5 mm thick, 40 mm bonded nonwoven

Order nr. Packaging 960-01

Sopro ERS 961 Perimeter insulation strip for screeds Height 100 mm

Carton (5 rolls à 20 m)

Packages/pallet

Pallet weight

approx. 35 kg

Self-adhesive perimeter insulation strip made from rotproof, nonwoven-backed, closed-cell polyethylene foam. Straightforward, reliable application. For incorporation at wall/floor junctions to prevent mortar bridges. Suitable for all types of cement and calcium sulphate-based screed. Particularly recommended for use in conjunction with Sopro Rapidur® FE 678 self-levelling screed. • Self-adhesive • Straightforward, reliable application • Eliminates sound transmission paths and restraint stresses at perimeter wall/floor joints • Straightforward, reliable corner detailing • Excellent adhesion to clean substrates • For indoor and outdoor use Size: 100 mm high, 8 mm thick, 40 mm bonded nonwoven

Order nr. Packaging 961-01

Tile fixing products

Carton (5 rolls à 20 m)

Packages/pallet

Pallet weight

approx. 45 kg

Accessories Sopro WEV 579 Polyester nonwoven

Special, reinforced polyester nonwoven as separating layer underneath ceramic tiles and for installation of removable ceramic tile surfaces. Separating layer Particularly suitable as a separating layer in composite constructions on critical, fresh substrates with a tendency to crack. Stress caused by residual shrinkage, hairline cracks and deformation of substrate, for example, is not transferred to tiled surface. Removal of coverings Particularly suitable for sample tiling and exhibition booths or for fitting out rented dwellings to preserve existing floor coverings. Tiles are laid on Sopro WEV 579 nonwoven, which is secured with fixing tape. When necessary, the tile covering can be removed quickly and cleanly along with nonwoven without damaging the substrate. • For indoor use • For walls and floors • For the installation of removable tile surfaces • Construction height 0.7 mm • Size 1 m × 50 m Lincence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.0 m²/m²

Order nr. Packaging 579-01

Roll (100 cm wide) 50 m

Packages/pallet

Pallet weight

approx. 174 kg

Fixing tape Self-adhesive velcro tape for secure fixing of Sopro WEV 579 nonwoven as removable surface on walls and floors in indoor areas.

Order nr. Packaging

NEW

SoproTex 568 Floor-levelling compound scrim

Roll (50 mm wide) 25 m

Coverage: approx. 1.1 m²/m²

Order nr. Packaging 568-01

Roll (90 cm wide) 100 m

See matrix of impact sound insulation and separating layer systems on page 100 – 101.

Packages/pallet

Pallet weight

approx. 327 kg

Accessories

579-09

Overview of Sopro‘s sound insulation and seperating layer systems Properties

Substrate

• As separating layer on critical substrates • Impact-sound insulating • Thermal insulation • Available in six different thicknesses • Low construction heights • Universal application

Concrete, cement screeds, calcium sulphate-based (anhydrite) screeds, plasterwork and flush-jointed masonry, mastic asphalt, existing terrazzo coverings, tiling, particleboard/ chipboard and timber floorboards

Sopro TDP 565

• Up to 16 dB 1) impact sound reduction below ceramic tiles • Serves as separating layer over critical substrates • Thermally insulating • Low construction height: 8 mm • Also suitable for use under carpet, parquet and PVC flooring • EC1PLUS very low emissionPLUS • For walls and floors, for indoor use

Sopro TEB 664

• Up to 17 dB 1) impact sound reduction below ceramic tiles • As separating layer on critical substrates • Thermally insulating • Exceptionally low construction height • Also suitable for use under carpet, parquet, laminate and PVC flooring • For walls and floors, for indoor use

Cement screeds, calcium sulphate-based (anhydrite) screeds, mastic asphalt screeds; board subfloors; concrete, lightweight and aerated concrete; cavity floors; existing ceramic, natural stone, terrazzo and cast stone coverings; heated floor constructions; parquet flooring, timber floorboards, particleboard/ chipboard, PVC and linoleum, indoors. Wooden substrates must be dimensionally stable and vibration-free.

Sopro WEV 579

• Scrim-reinforced polyester nonwoven used as separating layer and as base for removable coverings • To separate tile and natural stone coverings from shrinkage-prone substrates, e. g. newly laid cement screeds and concrete surfaces • As base for removable tile and natural stone coverings in showrooms

Screeds, plasterwork, gypsum plasterboard, aerated concrete, parquet flooring, timber floorboards, particleboard/chipboard, ceramics, natural stone, PVC and linoleum, indoors

Sopro AEB 640

• Thin, crack-bridging waterproof sheet for use as troublefree, flexible waterproof membrane and separating layer below ceramic tiling • Serves as separating layer • Flexible and crack-bridging • Alkali-resistant • Ageing-resistant and rotproof • With printed scale to simplify installation

Concrete and lightweight concrete, min. 3 months old; cement screeds; calcium sulphate-based (anhydrite and self-levelling anhydrite) screeds; mastic asphalt screeds; board subfloors; heated floor constructions (cement and calcium sulphate-based screeds); strong existing ceramic, natural stone, terrazzo or cast stone coverings; paperless gypsum panels, gypsum plasterboard and gypsum fibreboard; flush-jointed masonry (no composite masonry); masonry cement; cement render; lime/cement render; gypsum plaster; rigid foam board

Sopro AEB plus 639

• Flexible sheet used to provide rapid, reliable waterproof membrane and stress-relieving separating layer below natural stone and ceramic coverings. • Heavy-duty separating layer to provide stress relief • Flexible and crack-bridging • Particularly suitable for balconies and patios and for laying large-format fully vitrified stoneware • Exceptionally low construction height • Alkali-resistant • With printed scale to simplify installation • Ageing-resistant and rotproof • For walls and floors, indoors and outdoors

Concrete and lightweight concrete, min. 3 months old; cement screeds; calcium sulphate-based (anhydrite and self-levelling anhydrite) screeds; mastic asphalt screeds; board subfl oors; heated floor constructions (cement and calcium sulphate-based screeds); strong existing ceramic, natural stone, terrazzo or cast stone coverings; paperless gypsum panels, gypsum plasterboard and gypsum fibreboard; flush-jointed masonry (no composite masonry); masonry cement; cement render; lime/cement render; gypsum plaster; rigid foam board.

Accessories

Sopro FDP 558

100

Tile fixing products

Exept for Sopro FDP 558 2 mm and 4 mm

Overview of Sopro‘s sound insulation and seperating layer systems Application

Dimensions

Weight

Impact sound reduction

Thermal resistance

Water vapour transmission rate

2 mm

• Indoor • Wall, floor

60 cm × 100  cm

Approx. 0.8 kg/m²

Up to 8 dB 1)

0.0511 W/mK

0.039 m² K/W

4 mm

• Indoor • Wall, floor

60 cm × 100  cm

Approx. 2.9 kg/m²

Up to 10 dB 1)

0.0954 W/mK

0.042 m² K/W

7 mm

• Indoor • Wall, floor

60 cm × 100  cm

Approx. 4.5 kg/m²

Up to 10 dB 1)

0.0793 W/mK

0.088 m² K/W

9 mm

• Indoor • Wall, floor

60 cm × 100  cm

Approx. 6.3 kg/m²

Up to 10 dB 1)

0.0950 W/mK

0.095 m² K/W

12 mm

• Indoor • Wall, floor

60 cm × 100  cm

Approx. 8.4 kg/m²

Up to 10 dB 1)

0.0944 W/mK

0.127 m² K/W

8 mm

• Indoor • Wall, floor

60 cm × 100  cm

Approx. 4.2 kg/m²

Up to 16 dB 1)

0.0850 W/mK

0.100 m² K/W

3 mm

• Indoor • Wall, floor

1 m × 10 m

Approx. 3.1 kg/m²

Up to 17 dB 1)

0.0750 W/mK

0.040 m² K/W

0,7 mm

• Indoor • Wall, floor

1 m × 50 m

Approx. 0.145 kg/m²

–

0,4 mm

• Indoor Indoor • Wall, floor

1 m × 30 m 1 m × 10 m

Approx. 0.25 kg/m²

–

1,1 mm

• Indoor, outdoor • Wall, floor

1 m × 15 m

Approx. 0.43 kg/m²

–

Accessories

Thickness

101

Cleaning, impregnation and maintenance For general use

Sopro BR 711 Intensive biological cleaner

Phosphate- and solvent-free, biodegradable all-purpose cleaner for soiling to all kinds of ceramic surface, metal, plastics, wood etc. • Powerful dirt remover • Does not harm even sensitive surfaces • Biodegradable • For indoor and outdoor use

Order nr. Packaging

Packages/pallet

Pallet weight

approx. 507 kg

Bottle 1 ltr (only available in box with Nr 4)

480 (120 cartons)

approx. 528 kg

711-81

360 (90 cartons)

approx. 397 kg

Coverage: approx. 20 m²/ltr

Spray bottle 1 ltr (only available in box with Nr 4)

711-05

Spray bottle 0.5 ltr (only available in box with Nr 4)

368 (92 cartons)

approx. 212 kg

Sopro WE 715

Special cleaner for oil, grease and wax stains on ceramic surfaces, concrete, other mineral substrates, natural and cast stone surfaces etc.

Oil and wax remover

Coverage: 7 – 15 m²/ltr

Sopro SR 716 Sanitary cleaner

Coverage: 15 – 30 m²/ltr

102

Tile fixing products

711-83

Canister 5 ltr

711-80

• Removes dirt and makes surface washable with water • Ready-to-use • For indoor and outdoor use

Order nr. Packaging 715-81

Bottle 1 l (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 432 kg

Acidic sanitary cleaner for cleaning and disinfection of bathrooms, showers, swimming pools, toilets, tiled workplaces and social rooms. • Self-shining without need to polish • Biodegradable • Does not attack elastic jointing and sealing compounds

Order nr. Packaging 716-81

Spray bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

360 (90 cartons)

approx. 441 kg

Cleaning, impregnation and maintenance Sopro KR 633 Fireplace glass cleaner

Ready-to-use alkaline cleaner containing active cleaning ingredients plus special grease- and dirt-removing additives. For effortlessly swift and efficient removal of soot and burnt-on residue. Suitable for fireplace and stove glass, microwave, grill and oven glass panels, Ceran® hobs and all types of refractory glass. • Highly efficient removal of soot • With long-lasting results • For all types of refractory glass • For Ceran® hobs

Coverage: approx. 15 m²/ltr

Order nr. Packaging 633-01

Spray bottle 0.5 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

368 (92 cartons)

approx. 212 kg

For ceramic

Sopro GR 701 Basic cleaner

Versatile, water-thinnable cleaning concentrate for thorough c leaning of heavily soiled surfaces and occasional interim cleaning of heavy-duty areas.

Order nr. Packaging

Coverage: 10 – 50 m²/ltr

Sopro WP 707 Wipe-on care

Coverage: up to 1,000 m²/ltr

701-83

Canister 5 ltr

701-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

approx. 524 kg

480 (120 cartons)

approx. 564 kg

Very high-coverage, environmentally friendly cleaning and care concentrate for ceramic, brick and clinker tiles, cast stone units and terrazzo. • Cleaning and cares in single operation • For long-term application • Non-film-forming, non-leaching • For indoor and outdoor use

Order nr. Packaging 707-01

Bottle 1 ltr

Packages/pallet

Pallet weight

480

approx. 523 kg

103

Cleaning, impregnation and maintenance

• Removes oil and grease, wax, tar, care product residue and much more • For ceramic, natural and cast stone coverings • For pre-cleaning prior to tile-on-tile laying • For indoor and outdoor use

Cleaning, impregnation and maintenance Sopro FS 714 Stain stop

Special impregnation for stain-repellent treatment of floor and wall coverings made of absorbent and hence stain-sensitive, coarse ceramic tiles (terracotta, clinker etc.) and natural stones such as marble, limestone and granite. • Oil-, grease- and water-repellent • UV-resistant, non-yellowing • For indoor and outdoor use Please note: Do not apply until surfaces are fully dry (4 – 6 weeks after laying)!

Coverage: 5 – 15 m²/ltr

Sopro ZE 718 Cement skin remover for indoor use

Order nr. Packaging 714-81

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 408 kg

Concentrated, highly-active acidic cleaner for removing cement skin, rust, lime, grease and soap residue, various types of soiling and deposits of all kind, on all surfaces non-sensitive to acids, such as ceramic tiles, clinker, terracotta, exposed-aggregate concrete, natural stone, plastics, resin- bonded tiles, chrome and stainless steel.

Cleaning, impregnation and maintenance

• Particularly suitable for final cleaning upon completion • Contains no hydrochloric acid, no corrosive vapours • For indoor use

Coverage: 10 – 15 m²/ltr

Sopro ESE 548 Epoxy film remover

Order nr. Packaging 718-81

Bottle 1 ltr (only available in box with Nr 4)

104

Tile fixing products

Protect from frost during transportation and storage.

Pallet weight

480 (120 cartons)

approx. 564 kg

For removal of surface-dried or hardened epoxy resin film from t iling. Epoxy resin residue (film) can still be cleaned off days after application. • For indoor and outdoor use • Concentrate • For removal of film from smooth and slip-resistant tile coverings • For later cleaning of epoxy resin-grouted coverings

Order nr. Packaging

Coverage: 200 – 300 ml per 10 ltr water

Packages/pallet

548-81

Bottle 1 ltr

548-70

Bottle 250 mltr (only available in box with Nr 4)

Cleaning, impregnation and maintenance For fully vitrified stoneware

Sopro FPR 708 Fully vitrified stoneware cleaner

Cleaning and care concentrate for routine maintenance of n ormally soiled fully vitrified stoneware surfaces. Lifts and removes general dirt, light oil and grease films, rubber and shoe sole stains without streaks. • Cleans and polishes without streaks in single operation • For permanent application • Non-film-forming • Cleaned surfaces become more attractive and resistant with regular use • Biodegradable, solvent-free • For indoor and outdoor use

Coverage: up to 1,000 m²/ltr

Order nr. Packaging

Sopro FIR 713

Lifts and removes oil and grease films, rubber and shoe sole stains, poly mer and wax coatings, gloss emulsions, tough stains etc. from fully vitrified stoneware surfaces. Used for regular cleaning of heavy-duty surfaces and for occasional thorough cleaning.

Fully vitrified stoneware intensive cleaner

708-01

Bottle 1 ltr

Packages/pallet

Pallet weight

480

approx. 540 kg

Coverage: 5 –15 m²/ltr

Sopro FFS 719 Fully vitrified stoneware stain stop

Order nr. Packaging 713-81

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 522 kg

Impregnation especially for fully vitrified stoneware surfaces which offers lasting protection against water, oil, grease and other stains. • Facilitates maintenance and care, non-glossing • Specially suitable for newly laid or polished surfaces • With special oil- and grease-repellent additives • For indoor and outdoor use Please note: Do not apply until surfaces are fully dry (4 – 6 weeks after laying)!

Coverage: 20 – 30 m²/ltr

Order nr. Packaging 719-81

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 432 kg

105

Cleaning, impregnation and maintenance

• Biodegradable • Solvent-free • High coverage • For indoor and outdoor use

Cleaning, impregnation and maintenance For natural stone

Sopro NFS 704 Natural stone stain stop

Transparent impregnation especially for marble, natural and cast stone surfaces which provides long-lasting protection against oil, grease and water stains. • For protection against staining and to facilitate cleaning • UV-resistant, non-yellowing • For indoor and outdoor use Please note: Do not apply until surfaces are fully dry (4 – 6 weeks after laying)!

Coverage: 5 – 15 m²/ltr

Sopro NFV 705 Natural stone colour enhancer

Order nr. Packaging 704-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 540 kg

Special product for enhancing natural colour and texture of natural stone surfaces which appear too pale and colourless or which need to match colour of polished surface. • For absorbent, porous natural/cast stone and marble • Non-glossing • For indoor and outdoor use

Cleaning, impregnation and maintenance

Please note: Do not apply until surfaces are fully dry (4 – 6 weeks after laying)!

Order nr. Packaging

Coverage: approx. 10 m²/ltr

Sopro NWP 706 Natural stone wipe-on care

705-83

Canister 5 ltr

705-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

approx. 456 kg

480 (120 cartons)

approx. 480 kg

Environmentally friendly cleaning and care concentrate for all m arble, natural and cast stone surfaces, particularly useful where quick cleaning and lasting care are required in single operation. • Non-film-forming, non-leaching • For permanent application • Biodegradable • For indoor and outdoor use

Coverage: up to 1,000 m²/ltr

106

Tile fixing products

Order nr. Packaging 706-01

Bottle 1 ltr

Packages/pallet

Pallet weight

480

approx. 528 kg

Cleaning, impregnation and maintenance For terracotta Extra terracotta anti-stain protection

Additional impregnation of all untreated, absorbent terracotta, clay, brick, stove tile and similar surfaces, especially in stain-sensitive areas such as kitchens and dining rooms. • Guarantees maximum stain protection for absorbent surfaces after final treatment • Always applied prior to final treatment with Sopro CDW 742 terracotta wax finish • Solvent-free • For indoor use

Coverage: 10 – 15 m²/ltr

Order nr. Packaging

Sopro CA 737

Solvent-free impregnation to facilitate removal of tile grout from terracotta, clay and brick tiles.

Terracotta grouting aid

736-01

Bottle 1 ltr

Packages/pallet

Pallet weight

480

approx. 516 kg

• Protects absorbent surfaces from soiling by tile grout • Promotes adhesion of tile grout to joint faces • Biodegradable • For indoor and outdoor use

Coverage: 5 – 10 m²/ltr

Order nr. Packaging

Sopro CP 738

Solvent-free care concentrate for occasionally refreshing of waxed, terracotta, clay and brick tile finish.

Terracotta care concentrate

Coverage: approx. 20 m²/ltr Protect from frost during transportation and storage.

737-01

Bottle 1 ltr

Packages/pallet

Pallet weight

480

approx. 516 kg

• Intensifies colour and freshens appearance • Increases the protective performance of waxed surfaces • For indoor use

Order nr. Packaging 738-01

Bottle 1 ltr

Packages/pallet

Pallet weight

480

approx. 516 kg

107

Cleaning, impregnation and maintenance

Sopro CE 736

Cleaning, impregnation and maintenance Sopro CD 742 Terracotta wax finish

Ready-to-use wax product for self-shining, durable protection of terracotta, clay and brick tiles and similar surfaces. Also for factory pretreated or waxed terracotta tiles. • Intensifies natural light colour • Very abrasion resistant • For indoor use

Coverage: approx. 10 m²/ltr for two coats

Order nr. Packaging 742-01

Bottle 1 ltr

Packages/pallet

Pallet weight

480

approx. 520 kg

For outdoor use

Sopro FH 867 Cleaning, impregnation and maintenance

Paving grout cleaning aid

Water dissolved, high-alkaline product to achieve temporary water repellency of absorbent concrete and natural stone pavers to facilitate grouting. Sopro PFA 867 paving grout cleansing aid penetrates capillary system of mineral pavers to achieve water repellency, thereby allowing easier removal of paving grouts. Also suitable as cleansing aid for polygonally laid natural stone tiles in wall and floor areas. • For walls and floors, outdoors • Walls and floors • For brush and spray application • Low consumption • For cementitious and epoxy resin bonded paving grouts

Order nr. Packaging

Coverage: 5 – 15 m²/ltr

108

Tile fixing products

Protect from frost during transportation and storage.

867-05

Canister 5 ltr

867-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

approx. 509 kg

480 (120 cartons)

approx. 522 kg

Cleaning, impregnation and maintenance Sopro ZA 703 Cement skin remover for exterior use

Concentrated, high-performance acidic cleaner for removing c ement skin, lime and mortar residue plus efflorescence and tough soiling on all surfaces non-sensitive to acids, such as ceramic tiles, clinker, mosaic and terracotta. For application in outside areas. For inside use we recommend Sopro ZSE 718. • Acts quickly and thoroughly • Only suitable for exterior use due to strong odour • Particularly suitable for first-time cleaning of newly laid wall and floor finishes

Order nr. Packaging

Coverage: 5 – 15 m²/ltr

Sopro KL 709 Clinker oil

703-05

Canister 5 ltr

703-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

approx. 544 kg

480 (120 cartons)

approx. 558 kg

Special ready-to-use product for refreshing and enhancing colour of matt, unglazed clay and clinker tiles, brick tiles and similar unglazed ceramic wall and floor finishes. Cleaning, impregnation and maintenance

• Non-film-forming, non-glossing • Improves stain resistance and facilitates maintenance • For indoor and covered outdoor areas Please note: Do not apply until surfaces are fully dry (4 – 6 weeks after laying)!

Order nr. Packaging

Coverage: 5 – 10 m²/ltr

Packages/pallet

Pallet weight

709-83

Canister 5 ltr

approx. 432 kg

709-01

Bottle 1 ltr

480

approx. 456 kg

109

Cleaning, impregnation and maintenance Sopro RU 632 Rust converter

Acidic, reoxidizing stone cleaner with special anti-rust ingredients for rust removal and conversion. For cleaning iron-bearing natural stone and removing rust and associated discoloration from acid-resistant substrates. Also suitable for treating rust stains on cast stone units caused by surface corrosion of nails and other ferrous components etc. • Highly efficient removal of rust • With long-lasting results • Protects against renewed rusting • For indoor and outdoor use

Coverage: 7 – 15 m²/ltr

Sopro KA 631 Power cleaner for outdoors

Order nr. Packaging 632-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 624 kg

High-performance, acidic cleaner for removal of efflorescence, concrete and mortar residue, incrustations and general soiling from any type of acid-resistant surface, e. g. natural and cast stone, walls, facades, patios, clinker, tiling etc.

Cleaning, impregnation and maintenance

• High-efficiency cleaning • Extra-strong concentrate • Rinse only with water after application time • Solvent-free • For outdoor use

Coverage: 30 – 50 m²/ltr

110

Tile fixing products

Order nr. Packaging 631-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 564 kg

Tiling tools Standard programme Mixing bucket 30 l

Mixing bucket, made from rigid plastic with 30 ltr capacity, for mixing Sopro tile adhesives, tile grouts, filler compounds, screeds etc.

Order nr. Packaging 012-01

Measuring bucket

Single item

Measuring bucket with 10 ltr scale for measuring out water quantities.

10 l

Order nr. Packaging 093-01

Turbo stirrer Âattachment

Single item

Stirrer attachment for mixing Sopro flow-applied surface fillers. For M14 thread stirrers and drills.

Order nr. Packaging 081-01

Sponge float with extra-absorbent hydrosponge for preliminary/thorough washing down of cementitious Sopro tile grout finishes.

Tiling tools

Sponge float

Single item

Order nr. Packaging 076-01

Universal hand sponge

Single item

Universal sponge for cleaning tiles, tools etc.

Order nr. Packaging 087-01

Single item

111

Tiling tools Cleaning basin with handle

Full kit (incl. roller set)

Order nr. Packaging 092-01

Single item

Metal roller set Order nr. Packaging 092-07

Spiked roller

Single item

To release air from surface fillers. Width 25 cm, spike length 60 mm

Order nr. Packaging 011-01

Short-pile roller

Single item

For application of Sopro MGR 637 multi-purpose primer and Sopro epoxy primers. 25 cm wide, 8 mm pile, solvent-resistant

Order nr. Packaging 004-01

NEW

Tiling tools

Large-format tile levelling system

Single item

Levelling system for plane, even tile laying so as to prevent formation of any “steps“ in covering. Straps remain in place in adhesive bed. For use on walls and floors. Innovative washers protect caps against abrasion and prevent scratches or other damage to tile surface. Particularly suitable for use with Sopro VF 419 VarioFlex® Silver large-format flexible tile adhesive.

Order nr. Packaging

NEW

Joint wash cloth

086-01

Bucket (50 caps, 250 straps, 100 washers)

086-02

Carton (150 caps)

086-03

Carton (250 straps + 100 washers)

Fine, thermofixed nonwoven cloth, particularly suitable for rectified large-format tiles and small joint widths. Used to prevent washing-out of joints.

Order nr. Packaging 013-01

112

Tile fixing products

Carton with 5 pieces

Tiling tools NEW

Screeding rod

Foldable aluminium screeding rod, 150 cm wide, with two handles. Ideal for self-levelling screeds and self-levelling surface fillers, e.g. Sopro FS 15 550 floor-levelling compound.

Order nr. Packaging 095-01

NEW

Trapezoidal spatula

Single item

Flexible trapezoidal spatula with wooden handle and 18 cm wide steel blade. Suitable for all standard surface filling works. – A1: Particularly suitable for all coating works to Sopro AEB membrane joints – A2: Particularly suitable for coating with vinyl floor adhesives to bond of PVC/designer coverings – A3: Particularly suitable for coating with final layer of Sopro PU-FD 570/571 surface sealant

Order nr. Packaging

NEW

Level marker pin

010-08

Single item, TKB-serration A1

010-09

Single item, TKB-serration A2

010-10

Single item, TKB-serration A3

Self-adhesive level marker pins for precise setting out of thicker surface filler and scraed coats, up to a height of 10 cm. Ideal for marking measurement points.

NEW

Spiked shoes

008-01

Carton à 18 pieces

008-02

Carton (10 Bags à 18 pieces)

PFor walking over coated and filled surfaces and substrates, fitting all shoe sizes. 1 pair with spare strap.

Order nr. Packaging 005-01

Single item

113

Tiling tools

Order nr. Packaging

Tiling tools NEW

Silicone gun

Suitable for all 310 ml cartridges and 400 ml aluminium sausages. • Swivelling aluminium casing • Rubberized handle and trigger • Allows easy and uniform application to ensure neat finish

Order nr. Packaging 003-01

NEW

Cross-dowels

Single item

Stainless-steel cross-dowels for filling/structural bonding of screed cracks and joints.

Order nr. Packaging 097-01

Carton with 200 pieces

097-02

Carton (10 bags à 200 pieces)

Special epoxy programme Spiked roller for epoxy

To release air from epoxy and Sopro FDF flexible sealing compound coatings. Plastics with metal handle. Width 25 cm, spike length 11 mm

Order nr. Packaging

Tiling tools

016-01

Special grout float for epoxy

Single item

Special grout float for application of epoxy resin grouts,

Order nr. Packaging 075-01

114

Tile fixing products

Single item

Tiling tools Turbo stirrer attachment

Order nr. Packaging

Coarse wash pad

Order nr. Packaging

080-01

Single item

blue

088-01

Fine wash pad

Order nr. Packaging

white

Viscose sponge

083-01

Single item

Heavily absorbent viscose sponge for preliminary/thorough washing down of Sopro epoxy resin tile grout finishes, e.g. Sopro FEP.

Order nr. Packaging 084-01

Single item

Soprodur®-tools Professional mixing device

• For mixing 2–6 kg Soprodur® void-filling microcement slurry • With fixing claw for attachment to Soprodur® bucket • With special mixing disc • An electric drill, 1/2“ 20 UNF, with 43 mm European standard spindle collar, minimum speed > 2000 rpm is required

Order nr. Packaging

Hand syringe

Single item

For the insertion of Soprodur® Microcement Void Filler 900 in holes from 2 – 6  mm.

Order nr. Packaging 903-01

Spare parts set for hand syringe

Single item

Set (2 pressure connection pieces, 1 suction connection piece, 2 hoses, 1 white and one yellow adapter, 1 end piece)

Order nr. Packaging 904-01

Set

115

Tiling tools

909-01

Tiling tools Injection press

For the insertion of Soprodur® Microcement Void Filler 900 in the low pressure technic in holes from 6 – 8 mm.

Order nr. Packaging 905-01

Spare parts set for injection press

Single item

Set (1 inlet sealing piston, 1 outlet sealing piston, 1 gasket, 6 o-rings)

Order nr. Packaging 908-01

6 mm tile packer

Set

Set (10 packers, 10 end pieces, 20 plugs)

Order nr. Packaging 906-01

6 mm mortar packer

Set

Set (10 packers, 10 end pieces, 20 plugs)

Order nr. Packaging 907-01

8 mm mortar packer

Set

Set (10 packers, 10 end pieces, 20 plugs)

Order nr. Packaging 907-02

Set

Tiling tools

Choosing the right packer Sopro tile packer

Injection

Injection Gasket

Gasket

Sopro mortar packer

Tile Bedding mortar/ levelling coat Plug Screed

Tile

Concrete slab/ base

Mortar

116

Tile fixing products

Contact layer Plug

Tile adhesives

Sopro tile adhesive coverage chart Square serration

4 mm

6 mm

8 mm

10 mm

12 mm

20 mm

Coverage kg/m²

Consumpt. m²

Coverage kg/m²

Consumpt. m²

Coverage kg/m²

Consumpt. m²

Sopro SC 808

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro SC 810

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro SC 809

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro DBE 500

5 kg

1.6

3.1

2.4

2.1

3.2

1.6

4.0

1.3

—

Sopro FKM® Silver 600

25 kg 5 kg

1.1

22.7 4.5

1.7

14.7 3.0

2.2

11.4 2.3

2.8

8.9 1.8

3.3

7.6 1.5

3.5

7.1 1.4

Sopro FKM® XL 444

15 kg

0.7

21.4

1.1

13.6

1.4

10.7

1.8

8.3

2.1

7.1

2.7

5.6

Sopro FF 450

25 kg 5 kg

1.1

22.7 4.5

1.7

14.7 3.0

2.2

11.4 2.3

2.8

8.9 1.8

3.3

7.6 1.5

—

Sopro FFK 440

20 kg 5 kg 1 kg

1.6

12.5 3.1 0.6

2.4

8.3 2.1 0.4

3.2

6.3 1.6 0.3

4.0

5.0 1.3 0.2

—

Sopro FF 451

25 kg

1.3

19.2

2.0

12.5

2.6

9.6

3.3

7.6

3.9

6.4

—

Sopro MFK 446

25 kg 5 kg

1.2

20.8 4.2

1.8

13.9 2.8

2.4

10.4 2.1

3.0

8.3 1.7

3.6

6.9 1.4

—

Sopro MEG 666 megaFlex S2 MEG 665 Comp. A

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

Sopro MEG 666 megaFlex S2 MEG 665 Comp. B

8,25 kg

0.4

20.8

0.6

13.9

0.8

10.4

1.0

8.3

1.2

6.9

—

Sopro MEG 666 megaFlex S2 MEG 665

33,25 kg

1.6

20.8

2.4

13.9

3.2

10.4

4.0

8.3

4.8

6.9

—

Sopro MEG 666 megaFlex S2 turbo MEG 666 Comp. A

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

Sopro MEG 666 megaFlex S2 turbo MEG 666 Comp. B

8,25 kg

0.4

20.8

0.6

13.9

0.8

10.4

1.0

8.3

1.2

6.9

—

Sopro MEG 666 megaFlex S2 turbo MEG 666

33,25 kg

1.6

20.8

2.4

13.9

3.2

10.4

4.0

8.3

4.8

6.9

—

Sopro MEG 666 megaFlex TX MEG 667 Comp. A

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

Sopro MEG 666 megaFlex TX MEG 667 Comp. B

7 kg

0.3

20.8

0.5

13.9

0.7

10.4

0.8

8.3

1.0

6.9

—

Sopro MEG 666 megaFlex TX MEG 667

32 kg

1.5

20.8

2.3

13.9

3.1

10.4

3.8

8.3

4.6

6.9

—

Sopro MG-Flex® 669

15 kg

0.9

16.7

1.4

10.7

1.8

8.3

2.3

6.5

2.7

5.6

—

Sopro MG-Flex® XXL rapid-set 679

15 kg

0.9

16.7

1.4

10.7

1.8

8.3

2.3

6.5

2.7

5.6

—

Sopro‘s No.1 400

25 kg 5 kg

1.0

25.0 5.0

1.5

16.7 3.3

2.0

12.5 2.5

2.5

10.0 2.0

3.0

8.3 .7

3.7

6.8 1.4

Sopro‘s No.1 rapid-set 404

25 kg 5 kg

1.2

20.8 4.2

1.8

13.9 2.8

2.4

10.4 2.1

3.0

8.3 1.7

3.6

6.9 1.4

4.6

5.4 1.1

Sopro‘s No.1 TW 401

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

—

Sopro‘s No.1 white 996

25 kg 5 kg

1.1

22.7 4.5

1.7

14.7 3.0

2,2

11.4 2.3

2.8

8.9 1.8

3.3

7.6 1.5

—

Sopro‘s No.1 white rapid-set 997

25 kg

1.2

20.8

1.8

13.9

2.4

10.4

3.0

8.3

3.6

6.9

—

6 kg

1.5

4.0

2.3

2.6

3.0

2.0

3.8

1.6

—

25 kg

1.4

17.9

2.1

11.9

2.8

8.9

3.5

7.1

4.2

6.0

—

25 kg

1.3

19.2

2.0

12.5

2.6

9.6

3.3

7.6

3.9

6.4

4.2

8.3

3.7

Container size

Consumpt. m²

serration

Coverage kg/m²

serration

Consumpt. m²

serration

Coverage kg/m²

serration

Consumpt. m²

serration

Coverage kg/m²

serration

U-shaped serration 1)

SoproPU-Kleber PUK 503 SoproVarioFlex® HF® VF HF 420 SoproVarioFlex® Silver VF 419 SoproVarioFlex® XL VF XL 413

All stated consumption/coverage rates depend on angle of application with notched trowel and on substrate type and levelness.

25 kg

1.0

25.0

1.5

16.7

2.0

12.5

2.5

10.0

TKB serration M1

3.0

6.0

6.8

Tile adhesives

Sopro FKM® XL 444 Highly-flexible tile adhesive

Sopro FKM® Silver 600 Multi-purpose flexible tile adhesive

Sopro’s No. 1 400 Flexible tile adhesive

Sopro’s No. 1 404 Rapid-set flexible tile adhesive

Binder

Cement

DIN EN 12 004

C2 TE S1

C2 FT S1

C2 TE S1

C2 FTE S1

EMICODE

EC1

EC1PLUS R

General

PLUS

DGNB (German sustainable building council): highest quality level 4, row 8 (see page 248) Use

PLUS

Wall and floor

Interior and exterior

Damp and wet rooms

Floor heating

Large format tiles up to 1 m²

≥Large format tiles Large format tiles 1 m²

Fully vitrified stoneware

Covering material

Synthetic rasin based tiles

Natural stone system DS (dark stone, deformation stable)

Natural stone system HS (light natural stone, deformation stable)

Natural stone system D+ (dark natural stone, sensitive for deformation)

Natural stone system H+ (light natural stone, sensitive for deformation)

Substrates

l l

Cement screed, interior and exterior

Heated/unheated anhydrite screed

Dry screed

Magnesia screed

Stone-wood floors/screeds

Poured asphalt, GE 10, GE 15 interior, unheated

l min. 3 months old

Aerated concrete, interior walls

Even-surface masonry; not mixed masonry

Plaster (cement plaster/lime cement plaster)

Gypsum plaster

Old tiles

Carpet and PVC glue residue

Laquer coatings, non-removable

Oil paint

Wooden boards, floor

Chipboard, walls

Fibre cement boards (interior)

Gypsum plaster board/plaster fibreboard (Fermacell)

Metal

Concrete walls, interior walls

Tile fixing products

Please consider the technical product information for substrate preparation as well as for water proofing and seperation works if applicable or consult our technical service.

To be continued on next page

Sopro’s No. 1 996 White flexible tile adhesive

Sopro’s No. 1 997 Rapid-set white, flexible tile adhesive

Sopro VF XL 413 VarioFlex® XL tile adhesive

Cement

C2 TE S1

C2 FT

C2 E S1

C2 EF S1

EC1

PLUS

EC1

PLUS

SilverSopro VF HF Sopro VF 419 420 VarioFlex® early VarioFlex®, rapid-set high strength tile tile adhesive adhesive

PLUS

Sopro FF 450 Flexible tile adhesive

Sopro FF 451 Rapid-set tile adhesive

Cement

C2 EF

C2 TE S1

C2 FTE

EC1

PLUS

EC1

PLUS

EC1PLUS R

Floor

l l

l min. 3 months old

l particularly recommended

l suitable

Tile adhesives

Application matrix

Tile adhesives

Sopro SC 808 Standard tile adhesive

Sopro SC 810 Standard tile adhesive, rapid-set

Sopro megaFlex S2 Highly-flexible floating tile adhesive

Sopro megaFlex S2 turbo, Highlyflexible floating tile adhesive

Cement

C2 TE

C2 FT

C2 E S2

C2 EF S2

General Binder DIN EN 12 004 EMICODE

EC1

PLUS

DGNB (German sustainable building council): highest quality level 4, row 8 (see page 248)

EC1

PLUS

Wall and floor

Floor

Interior and exterior

Damp and wet rooms

Floor heating

Large format tiles up to 1 m²

≥Large format tiles Large format tiles 1 m²

Use

Covering material

Fully vitrified stoneware

Synthetic rasin based tiles

Natural stone system DS (dark stone, deformation stable)

Natural stone system HS (light natural stone, deformation stable) Natural stone system D+ (dark natural stone, sensitive for deformation)

Natural stone system H+ (light natural stone, sensitive for deformation) Substrates 1) Cement screed, interior and exterior

l 2)

Heated/unheated anhydrite screed

Dry screed

Magnesia screed

Stone-wood floors/screeds

Poured asphalt, GE 10, GE 15 interior, unheated

l min. 3 months old

l min. 28 days old

Aerated concrete, interior walls

Even-surface masonry; not mixed masonry

Plaster (cement plaster/lime cement plaster)

Gypsum plaster

Old tiles

Carpet and PVC glue residue

Laquer coatings, non-removable

Oil paint

Wooden boards, floor

Chipboard, walls

Concrete walls, interior walls

Fibre cement boards (interior)

Gypsum plaster board/plaster fibreboard (Fermacell)

Metal

Tile fixing products

Please consider the technical product information for substrate preparation as well as for water proofing and seperation works if applicable or consult our technical service.

Sopro Sopro megaFlex TX, Highly- MG-Flex 669, flexible tile adhesive Highly-flexible tile adhesive

Tile adhesives

Application matrix

Sopro MG-Flex 679, Highly-flexible tile adhesive, rapid-set

Sopro MFK 446 Flexible adhesive for marble tiles

Sopro FFK 440 Flexible ready-touse tile adhesive

Sopro DBE 500 Epoxy tile adhesive, two component

Sopro PUK 503 Highly-flexible poly urethane adhesive, two-component

Cement

Dispersion

C2 FT S2

C2 TE S2

C2 FT S2

C2 FT

D2 TE

R2 T

EC1

PLUS

indoor

l l

l 2)

l min. 28 days old

l min. 3 months old

l min. 28 days old

l min. 3 months old

l min. 28 days old

l l particularly recommended

l suitable

Young, unheated cement screed: up to the 5th. day; after that only after 28 days.

Tile grouts Sopro DF 10® Flexible designer tile grout 1 – 10 mm

ctio prote nced enha inst acidic * aga ers n a e cl

d loure ntly co brillia lime-film and ee fr

ould nts m preve ation form

ted to

Walkable after only

Extra-high abraision resistance

CG2 WA

Loadable after 12 hours!

HIG H WA

y t o cle a

S CRY TAL

E LIN

imicrobi nt

R BIN D

cement thro ug an nh

dition ad

itt

Option al e

EN 1

2 hours!

Reduced water absorption

DI N

s Te

l d a n d s il v

Colour

System component

compared to standard Sopro cemen titious tile grouts for domestic appli cations.

applicable to all Sopro DF 10® colours except deep blue, signal red and wine red.

treated product according to biocide decree; please consult the current information at www.sopro.com

Tile fixing products

Bucket 10 kg Order no. – – 1052-10 – 1053-10 1055-10 1062-10 1054-10 – 1060-10 1061-10 – – – – – – – – – – – – – – – –

Packaging

Coverage: See page 41

Packages/pallet

Pallet weight

Bucket 10 kg

440 kg

Bucket 5 kg

360 kg

288 (48 cartons)

288 kg

Bucket 1 kg (only available in box with 6)

See also application matrix for tile grouts on pages 48 – 49.

Tile grouts

Sopro DF 10® balibrown

Sopro DF 10® anthracite with Sopro Glitter silver

Sopro Glitter Glitter

Coverage (Sopro DF 10®) max. 4 bags per 10 kg, max. 2 bags per 5 kg, max. 40 g per 1 kg

Sopro DF 10® grouting colours

Metallic colour glitter for addition to Sopro DF 10®, Sopro FL plus, Sopro Titec+ or FEP plus epoxy tile grout to achieve shiny metallic effect.

Order no.

Colour

Packaging

1019-80

gold

Carton 1 kg (10 bags à 100 g)

1020-80

silver

Carton 1 kg (10 bags à 100 g)

The impact of all colours can be enhanced using Sopro Glitter in gold or silver!

white 10

light grey 16

silver grey 17

manhattan 77

grey 15

sandgrey 18

stone grey 22

concrete grey 14

basalt 64

anthracite 66

black 90

parchment 27

jasmin 28

light beige 29

beige 32

beige bahama 34

jurabeige 33

caramel 38

sahara 40

brown 52

chestnut 50

mahogany 55

balibrown 59

ebony 62

deep blue 98

signal red 91

wine red 92 For technical reasons, the colours shown here may diverge from those of the fully cured material.

Tile grouts

Sopro FL plus ďŹ&#x201A;exible tile grout Tile grouts

Try it once and youâ&#x20AC;&#x2DC;ll be a fan for life! Excellent workability and permanent colour brilliance

red colou antly brilli lime-film and ee fr

ction prote nced enha inst acidic * aga ers clean

r- and wate ellent p e -r t dir

ould nts m preve ation m for

Sopro FL plus grouting colours

The impact of all colours can be enhanced using Sopro Glitter in gold or silver!

white 10

light grey 16

silver grey 17

grey 15

sandgrey 18

stone grey 22

concrete grey 14

basalt 64

anthracite 66

black 90

jasmin 28

light beige 29

beige bahama 34

jurabeige 33

brown 52

balibrown 59

Tile fixing products

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Sopro FL plus 2 – 20 mm

ction prote nced enha inst acidic * aga rs e clean

d loure ntly co brillia lime-film and ee fr

ould nts m preve ation form

s Te

ted to

CG2 WA

2 hours!

Reduced water absorption

Loadable after 12 hours!

y t o cle a

cement thro ug an nh

itt

of pr

dition ad

Option al e

R BIN D

with al ic pract le hand

HIG H WA

S CRY TAL

E LIN

imicrobi nt

E N 13 8

Walkable after only

Extra-high abraision resistance

l d a n d s il v

System component

Colour

Bag 15 kg Order no.

Bag 5 kg Order no.

white 10

NEW

1135-15

1135-05

light grey 16

NEW

1131-15

1131-05

silver grey 17

1126-15

1126-05

grey 15

1120-15

1120-05

sandgrey 18

1122-15

1122-05

stone grey 22

1127-15

1127-05

concrete grey 14

1121-15

1121-05

basalt 64

1125-15

1125-05

anthracite 66

1123-15

1123-05

black 90 jasmin 28

1124-15

1124-05

NEW

1133-15

1133-05

light beige 29

NEW

1132-15

1132-05

beige bahama 34

1129-15

1129-05

jurabeige 33 brown 52

1130-15

1130-05

1134-15

1134-05

1128-15

1128-05

Packages/pallet

Pallet weight

balibrown 59

NEW

compared to standard Sopro cemen titious tile grouts for domestic appli cations.

treated product according to biocide decree; please consult the current information at www.sopro.com

Standard household cleaners.

Packaging

Coverage: See page 41 See also application matrix for tile grouts on pages 48 – 49.

Bag 15 kg with handle

1,050 kg

Bag 5 kg

200

1,000 kg

Tile grouts

Tile grouts Sopro TF+

High-strength tile grout Tile grouts

1 – 10  mm

reaction to r

Walkable after only

2 hours! Loadable after 12 hours!

S CRY TAL

s Te

E LIN

Sui t

E N 13 8

le for dri ab

ing nk

with al ic pract le n a h d

R BIN D

Reduced water absorption

CG2 WA DI

ted to

Extra-high abraision resistance

HIG H

Cement instead of epoxi

grouts in es

Alternativ

loure ntly co brillia lime-film and ee fr

r c o n t ain

cement thro ug an nh

itt

dition ad

Option al e

High loadability

High mechanical strength and abrasion resistance through use of Mikrodur® microcement. As an alternative to epoxy-based grouts.

l d a n d s il v

System component

Coverage: See page 41

Order no. Colour

Packaging

Packages/pallet

Pallet weight

591-15

white 10

Bag 15 kg with handle

1,050 kg

556-15

silver grey 17

Bag 15 kg with handle

1,050 kg

592-15

grey 15

Bag 15 kg with handle

1,050 kg

585-15

concrete grey 14 Bag 15 kg with handle

1,050 kg

593-15

anthracite 66

Bag 15 kg with handle

1,050 kg

598-15

black 90

Bag 15 kg with handle

1,050 kg

Sopro TF+, Sopro TFb and Sopro FL grouting colours

white 10

silver grey 17

grey 15

sandgrey 18

stone grey 22

basalt 64

anthracite 66

black 90

beige 32

jurabeige 33

Tile fixing products

See also application matrix for tile grouts on pages 48 – 49.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

concrete grey 14

Sopro TFb High-strength tile grout 3 – 30  mm

s Te

ted to

Extra-high abraision resistance

DI e

Reduced water absorption

E N 13 8

reaction to r

enish Rh

grouts in es

Alternativ

CG2 WA

Cement instead of epoxi

Trass or

i g i n al

High loadability

Please consult resistance table!

Order no. Colour

Packaging

Packages/pallet

Pallet weight

Coverage: See page 41

554-21

grey 15

Bag 25 kg

1,000 kg

557-21

concrete grey 14

Bag 25 kg

1,000 kg

Sopro FL

Flexible tile grout 2 – 20  mm

s Te

enish Rh

ted to

Extra-high abraision resistance

Trass

DI N

Reduced water absorption

CG2 WA

E N 13 8

i g i n al

Colour

Only colours concrete grey, basalt, anthracite and black.

Coverage: See page 41 See also application matrix for tile grouts on pages 48 – 49.

Bag 25 kg Order no.

Bag 5 kg Order no.

silver grey 17

528-21

528-05

grey 15

526-21

526-05

sandgrey 18

627-21

627-05

stone grey 22

622-21

622-05

concrete grey 14

529-21

529-05

basalt 64

625-21

–

anthracite 66

626-21

–

black 90

628-21

–

beige 32

629-21

–

jurabeige 33

624-21

–

Packaging

Packages/pallet

Pallet weight

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Tile grouts

Tile grouts Sopro Saphir® 5 Water-repellent tile grout Tile grouts

1 – 5 mm s Te

ted to

Extra-high abraision resistance

Reduced water absorption

E N 13 8

imicrobi nt

y t o cle a

CG2 WA

with al ic pract le hand

Bag 15 kg Order no. 910-15 911-15 912-15 – 913-15 – – – – 917-15 – – – – – –

Packaging

Coverage: See page 41

Bag 5 kg Order no. 910-05 911-05 912-05 915-05 913-05 927-05 914-05 925-05 926-05 917-05 918-05 916-05 919-05 920-05 921-05 924-05

Packages/pallet

Pallet weight

Bag 15 kg with handle

1,050 kg

Bag 5 kg

200

1,000 kg

Sopro Saphir® 5 and Sopro Brillant® grouting colours

grey 15

sandgrey 18 Tile fixing products

white 10

light grey 16

silver grey 17

manhattan 77

stone grey 22

concrete grey 14

anthracite 66

black 90

See also application matrix for tile grouts on pages 48 – 49.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Sopro Brillant® Water-repellent tile grout 1 – 10 mm s Te

ted to

Extra-high abraision resistance

Reduced water absorption

E N 13 8

imicrobi nt

y t o cle a

CG2 WA

with al ic pract le hand

Bag 15 kg Order no. – 802-15 803-15 804-15 806-15 807-15 805-15 838-15 – – – 834-15 833-15 – –

Colour white 10 light grey 16 silver grey 17 grey 15 sandgrey 18 stone grey 22 concrete grey 14 anthracite 66 black 90 jasmin 28 light beige 29 beige bahama 34 jurabeige 33 brown 52 balibrown 59

Packaging

Coverage: See page 41

Only colours anthracite and black.

Pallet weight

Bag 15 kg with handle

1,050 kg

Bag 5 kg

200

1,000 kg

parchment 27

jasmin 28

light beige 29

beige 32

jurabeige 33

brown 52

chestnut 50

balibrown 59

See also application matrix for tile grouts on pages 48 – 49.

Packages/pallet

Bag 5 kg Order no. 801-05 802-05 803-05 804-05 806-05 807-05 805-05 838-05 839-05 831-05 832-05 834-05 833-05 835-05 837-05

beige bahama 34

For technical reasons, the colours shown here may diverge from those of the fully cured material.

anemone 35

Tile grouts

Tile grouts Sopro MFs Tile grout

Tile grouts

2 – 5 mm

ted to es

• 2 – 5 mm joint widths • For walls and floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII

CG1 N

E N 13 8

Order no. Colour

Packaging

Packages/pallet

Pallet weight

410-21

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Bag 25 kg

1,000 kg

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

410-05 431-21 430-21 430-05

silver grey 17

435-21

Sopro MFs+b

435-05

3 –12 mm

CG1 E N 13 8

grey 15

• 3 – 12 mm joint widths • For walls and floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII

ted to es

Order no. Colour

Packaging

Packages/pallet

Pallet weight

Coverage: See page 41

539-21

grey 15

Bag 25 kg

1,000 kg

559-21

concrete grey 14

Bag 25 kg

1,000 kg

Sopro MFb

Tile grout

5 – 20  mm

ted to es

• 5 – 20 mm joint widths • For walls and floors, indoors and outdoors • Low-chromate to Regulation 1907/2006 EC, Annex XVII

CG1 N

E N 13 8

Coverage: See page 41 Tile fixing products

light grey 16

Coverage: See page 41

Tile grout

white 10

See also application matrix for tile grouts on pages 48 – 49.

Order no. Colour

Packaging

Packages/pallet

Pallet weight

535-21

Bag 25 kg

1,000 kg

Bag 5 kg

200

1,000 kg

Bag 25 kg

1,000 kg

535-05 530-21

grey 15 concrete grey 14

Sopro TNF Natural stone grout with trass 5 – 40  mm

s Te

enish Rh

ted to

Extra-high abraision resistance

DI N

Reduced water absorption

EN 1

CG2 WA 38

Trass or

i g i n al

Coverage: See pages 224 – 225

Order no. Colour

Packaging

Packages/pallet

Pallet weight

674-21

grey 15

Bag 25 kg

1,000 kg

675-21

pavement grey 13

Bag 25 kg

1,000 kg

677-21

sandgrey 18

Bag 25 kg

1,000 kg

676-21

anthracite 66

Bag 25 kg

1,000 kg

684-21

beige 32

Bag 25 kg

1,000 kg

Sopro TNF grouting colours

grey 15

pavement grey 13

sandgrey 18

anthracite 66

beige 32

silver grey 17

grey 15

concrete grey 14

Sopro MF grouting colours

white 10

light grey 16

See also application matrix for tile grouts on pages 48 – 49.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Tile grouts

Tile grouts Sopro FEP plus Epoxy tile grout, components A + B Tile grouts

2 – 12  mm

EN 120

E N 13 8

cement thro ug an nh

dition ad

itt

of pr

ed olour larly c free! u c i t r Pa lm me-fi and li

High loadability

Option al e

R2 RG

l d a n d s il v

Coverage: 2.0 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width; approx. 2.0 kg/m² for grouting and glueing of glass mosaic 2)

Order no. Colour 1509-05 translucent

Packaging

Packages/pallet

Pallet weight

Bucket 5 kg

360 kg

1501-05 white 10

Bucket 5 kg

360 kg

1504-05 silver grey 17

Bucket 5 kg

360 kg

1508-05 grey 15

Bucket 5 kg

360 kg

1503-05 stonegrey 22

Bucket 5 kg

360 kg

1502-05 anthracite 66

Bucket 5 kg

360 kg

1510-05 black 90

Bucket 5 kg

360 kg

1505-05 jurabeige 33

Bucket 5 kg

360 kg

1506-05 brown 52

Bucket 5 kg

360 kg

1507-05 balibrown 59

Bucket 5 kg

360 kg

Packaging

Packages/pallet

Pallet weight

Bucket 5 kg

100

500 kg

Sopro FEP plus grouting colours

The impact of all colours can be enhanced using Sopro Glitter in gold or silver!

translucent

white 10

silver grey 17

grey 15

black 90

jurabeige 33

brown 52

balibrown 59

Tile fixing products

Please consult resistance table in technical product information!

stone grey 22

For technical reasons, the colours shown here may diverge from those of the fully cured material.

anthracite 66

Protect from frost during transportation and storage.

Sopro FEP Epoxy tile grout, Components A + B 1,5 – 12  mm

EN 120

R2 T RG High loadability

E N 13 8

Colour

Coverage: 2.0 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width; approx. 2.0 kg/m² for grouting and glueing of glass mosaic 2)

2 – 12  mm

EN 120

R2 T RG N

E N 13 8

Bucket 2,5 kg Order no.

white 10

501-50

501-01

silver grey 17

504-50

504-01

grey 15

508-50

508-01

anthracite 66

502-50

502-01

Packages/pallet

Pallet weight

Packaging Bucket 5 kg

300 kg

Bucket 2,5 kg

150 kg

Sopro FEP

Bucket 5 kg Order no.

High loadability

Mixing ratio 2.25 kg component A + 3.25 kg component B + 7.00 kg Sopro cristal quarz sand

Colour: grey 15

Coverage: 2.0 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width; approx. 2.0 kg/m² for grouting and glueing of glass mosaic 2) 1)

Please consult resistance table in technical product information!

Order no. Packaging

Packages/pallet

Pallet weight

Packaging comprises 4 × 5.5 kg: 604-42

Component A (sold in boxed form): 4 Buckets 2.25 kg

120 (30 cartons)

270 kg

604-44

Component B (sold in boxed form): 4 Buckets 2.25 kg

120 (30 cartons)

390 kg

These tables present approximate values calculated on the basis of practical application. The values may vary upwards or downwards due to the natural form of the flag and sett pavings. In case of doubt, trial laying of a sample area is recommended to determine coverage. Joints depth 30 mm. No liability may be construed and no claims shall be accepted in respect of these details.

Tile grouts

Tile grouts Sopro EAH 547 Tile grouts

Epoxy cleaning aid

Order no. Packaging

Coverage: 50 – 100 ml per 10 ltr water

547-81

Bottle 1 ltr

547-70

Bottle 250 mltr

Sopro ESE 548

For removal of surface-dried or hardened epoxy resin film from t iling. Epoxy resin residue (film) can still be cleaned off days after application.

Epoxy film remover

• For indoor and outdoor use • Concentrate • For removal of film from smooth and slip-resistant tile coverings • For later cleaning of epoxy resin-grouted coverings

Order no. Packaging

Coverage: 200 – 300 ml per 10 ltr water

548-81

Bottle 1 ltr

548-70

Bottle 250 mltr (Only avialable in box with 4 pieces)

Sopro ELD 458

Liquid dispersion used to prepare static-dissipating, hydraulically setting, thin-bed tile adhesives and tile grouts. For static dissipation in:

Conductive dispersion

– operating theatres, computer rooms and offices – power stations, chemical plants – production and storage facilities subject to explosion hazards Test certificates Available upon request

Coverage: 1.25 kg for 25 kg grout mortar

Order no. Packaging

Sopro FUF

Easily workable pure-acrylic-based grout coating for durable c olouring of old, stained cementitious tile joints. Weather-resistant to DIN 18 363.

Colour coating for tile grouts

458-43

Packages/pallet

Pallet weight

approx. 248 kg

Canister 3.75 kg

• For walls and floors, indoors and outdoors • High coverage • High mechanical resistance • Ready-to-use • Water- and dirt-repellent Other colours upon request.

Order no. Colour

Coverage: approx. 20 m² for 15 × 15 cm tiles and 3 – 5 mm joint widths

Packaging

950-01

white 10

Bottle 0.3 ltr incl. sponge

951-01

silver grey 17

Bottle 0.3 ltr incl. sponge

952-01

grey 15

Bottle 0.3 ltr incl. sponge

953-01

anthracite 66

Bottle 0.3 ltr incl. sponge

Sopro FUF grouting colours white 10

Tile fixing products

Protect from frost during transportation and storage.

silver grey 17

grey 15

For technical reasons, the colours shown here may diverge from those of the fully cured material.

anthracite 66

Coverage chart Table 1 Ceramic (format) in cm

Joint length m/m²

1 × 1

190,0

2 × 2

90,0

5 × 5

35,0

10 × 10

19,5

10 × 15

16,2

10 × 20

14.5

11,5 × 24 (split tiles)

12.5

15 × 15

13.4

15 × 20

11.5

20 × 20

9.9

20 × 30

8.2

25 × 25

7.9

30 × 30

6.6

30 × 60

5.0

40 × 40

5.0

50 × 50

4.0

60 × 60

3.3

40 × 80

3.8

15 × 90

7.8

45 × 90

3.3

100 × 100

2.0

100 × 300

1.0

10 × 20 cm

Joint length:

14.5 m/m²

Joint width: Joint depth:

4 mm 8 mm

Coverage rate:

Tile grout requirement: 14.5 × 48 = 696 g/m²

These tables present approximate values calculated on the basis of practical application. The values may vary upwards or downwards due to the natural form of the flag and sett pavings. In case of doubt, trial laying of a sample area is recommended to determine coverage. Joints depth 30 mm. No liability may be construed and no claims shall be accepted in respect of these details.

You may also wish to use the tile grout coverage calculator on our website at

www.sopro.com or in the Sopro App!

Tile grouts

How to determine grout requirement

Table 2 Joint width (mm)

Joint depth (mm) 5

Coverage factor (grammes) 2

22.5

31.5

40.5

49.5

58.5

67.5

37.5

52.5

67.5

82.5

97.5

105

112.5

108

117

126

135

52.5

73.5

94.5

105

115.5

126

136.5

147

157.5

108

120

132

144

156

168

180

67.5

94.5

108

121.5

135

148.5

162

175.5

189

202.5

105

120

135

150

165

180

195

210

225

82.5

115.5

132

148.5

165

181.5

198

214.5

231

247.5

108

126

144

162

180

198

216

234

252

270

Tile grouts

with fu n

static form gi

prevents mould attack

tion ula

Tile grouts

Sopro Sanitary Silicone

Colour

Order no.

Colour

Order no.

transparent 00

052-71

light beige 29

054-71

white 10

050-71

beige 32

058-71

light grey 16

037-71

beige bahama 34

053-71

silver grey 17

036-71

anemone 35

063-71

manhattan 77

033-71

jurabeige 33

032-71

grey 15

051-71

caramel 38

sandgrey 18

034-71

sahara 40

stone grey 22

035-71

brown 52

065-71

concrete grey 14

038-71

mahogany 55 NEW

066-71

basalt 64

030-71

balibrown 59 NEW

056-71

anthracite 66

060-71

ebony 62

069-71

black 90

061-71

deep blue 98

734-71

parchment 27

055-71

signal red 91

732-71

jasmin 28

062-71

wine red 92

733-71

057-71 NEW

064-71

Treated product according to biocide decree; please consult the current information at www.sopro.com

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Packaging

Packages/pallet

Pallet weight

1,080

approx. 334 kg

Cartridge 310 ml

Silicon grouting colours

transparent 00

white 10

light grey 16

silver grey 17

manhattan 77

grey 15

sandgrey 18

stone grey 22

concrete grey 14

basalt 64

anthracite 66

black 90

parchment 27

jasmin 28

light beige 29

beige 32

beige bahama 34

anemone 35

NEW

jurabeige 33

caramel 38

NEW

sahara 40

brown 52

chestnut 50

deep blue 98

signal red 91

wine red 92

NEW

balibrown 59

ebony 62 Tile fixing products

See also application matrix for sealants on page 47.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

mahogany 55

Tile grouts

prevents mould attack

Tile grouts

static form gi tion ula

with fu n

Sopro Ceramic Silicone

Licence – Very low emission according to GEV-Emicode EC1PLUS

Colour transparent 00 white 10 light grey 16 silver grey 17 manhattan 77 grey 15 sandgrey 18 stone grey 22 concrete grey 14 basalt 64 anthracite 66 black 90

Order no. 782-71 780-71 784-71 783-71 778-71 781-71 889-71 877-71 785-71 725-71 773-71 886-71

Colour

Order no.

parchment 27 jasmin 28 light beige 29 beige 32 beige bahama 34 jurabeige 33 sahara 40 brown 52 chestnut 50 mahogany 55 balibrown 59 ebony 62

789-71 787-71 788-71 786-71 775-71 881-71 723-71 882-71 883-71 724-71 884-71 726-71

Treated product according to biocide decree; please consult the current information at www.sopro.com

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

static form gi

prevents mould attack

tion ula

with fu n

Sopro Marble Silicone

Packaging

Packages/pallet

Pallet weight

1,080

approx. 334 kg

Cartridge 310 ml

Order no.

Colour

Order no.

transparent 00

790-71

concrete grey 14

799-71

white 10

791-71

light grey 16

891-71

basalt 64 anthracite 66

844-71 798-71

silver grey 17

792-71

black 90

797-71

grey 15

793-71

light beige 29

796-71

sandgrey 18

795-71

beige 32

842-71

stone grey 22

899-71

jurabeige 33

794-71

Treated product according to biocide decree; please consult the current information at www.sopro.com

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Packaging Cartridge 310 ml See also application matrix for sealants on page 47.

Packages/pallet

Pallet weight

1,080

approx. 342 kg

Tile grouts SoproDur® HF-D 817 Tile grouts

High-strength sealant

High loadability

grey 15

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Order no. Colour

Packaging

817-71

Cartridge 310 ml

Sopro DA 049

Gunnable, acrylic dispersion-based sealant for plasto-elastic filling of perimeter joints between absorbent materials, e. g. concrete, masonry, plasterwork, timber, ceramics etc.

Acrylic sealant

grey 15

Packages/pallet

Pallet weight

1,080

approx. 368 kg

white 10

Coverage: 310 ml for 3.1 m joint (10 × 10  mm)

Order no. Colour

Packaging

049-03

Cartridge 310 ml

Sopro GM 026

Smoothing agent for clean and easy smoothing of silicone and acrylic Sopro sealants.

Smoothing agent

white 10

Tile fixing products

Protect from frost during transportation and storage.

Pallet weight

1,080

approx. 550 kg

• For indoor and outside use • Environmentally compatible • Biodegradable • Sold in convenient spray bottle

Order no. Packaging

Coverage: approx. 20 ml per metre joint

Packages/pallet

026-05

Canister 5 ltr

026-50

Spray bottle 0.5 ltr (only available in box with Nr 4)

For technical reasons, the colours shown here may diverge from those of the fully cured material.

NEW

Packages/pallet

Pallet weight

approx. 420 kg

480 (40 cartons)

approx. 273 kg

See also application matrix for waterproofings on page 47.

Sopro PUD 682 Polyurethane sealant

High loadability

grey

Order no. Packaging

Coverage: 840 g for 3.1 m joint (10 × 10  mm)

682-73

672 kg

with fu n

Part icu la

Pallet weight

800 (40 cartons)

• For indoor and outdoor use • Acetic-curing • With fungicidal and fungistatic properties to DIN EN ISO 846 1)

table for la rg sui e rly

cts oje pr

tion ula

prevents mould attack

Packages/pallet

Sopro Ceramic Silicone S static form gi

Aluminium sausage 840 g (à 600 ml) (only available in box with Nr 20)

tra

a ct-s e ct o r tr

Colour

white 10 light grey 16

Order no. NEW

695-84

NEW

991-84

silver grey 17

696-84

grey 15

697-84

Colour

Order no.

sandgrey 18 NEW stone grey 22 NEW concrete grey 14 NEW anthracite 66 NEW

992-84 995-84 699-84 998-84

Treated product according to biocide decree; please consult the current information at www.sopro.com

Packaging

Coverage: 400 ml for 3.8 m joint (10 × 10  mm)

Sopro Ceramic Silicone S grouting colours..

silver grey 17

grey 15

Packages/pallet

Pallet weight

960 (60 cartons)

approx. 450 kg

Aluminium sausage 400 ml (only available in box with Nr 12)

NEW

white 10

light grey 16

NEW

sandgrey 18

stone grey 22

concrete grey 14

anthracite 66

See also application matrix for waterproofings on page 47.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Tile grouts

Tile grouts Sopro Primer P 4050

Bonding primer for use in conjunction with Sopro Sanitary silicone, Sopro Marble silicone and SoproDur® HF-D 817 on concrete, cellular concrete, render, marble, granite and sandstone.

Tile grouts

• For indoor and outdoor use • One component • Especially for absorbing, open porous substrates

Coverage: approx. 5 ml/m joint for 10 mm joint depth

Sopro Primer

Order no. Packaging 021-71

Aluminium bottle 100 ml

Coverage: approx. 2 ml/m joint for 10 mm joint depth

Sopro Primer UW 025

Coverage: approx. 4 ml/m joint for 10 mm joint depth

Sopro SB 113 Cut protection tape

Order no. Packaging 022-01

Aluminium bottle 100 ml

Order no. Packaging 025-70

Aluminium bottle 250 ml

Coverage: approx. 1.05 m/m

Tile fixing products

Order no. Packaging 113-01

Roll (50 mm wide) 10 m

Tile grouts

Application matrix for Sopro sealants

Sopro Sanitary Silicone

Sopro Ceramic Silicone

Sopro Ceramic Silicone S

Sopro Marble Silicone

SoproDur® HF-D 817

Sopro DA 049

Sopro PUD 682

acetic-curing

neutral-curing

acetic-curing

Acrylate

Polyurethane

l l

Properties For indoor and outdoor use Curing Fungistatic to DIN EN ISO 846 Overcoatable Resistant to high-pressure cleaning equipment

For underwater applications

High loadability

EC1PLUS

Top quality level 4, line 12

-1, -2, -3, -4

-2, -3

-1, -3

-4

-1

-1, -2, -3, -4

Acrylic bathtubs/shower trays, sanitary

Aluminium

Concrete

EMICODE DGNB Application according to DIN 15 651

EC1PLUS

Substrates

Chrome

Stainless steel

Enamel

Glass

Wood, varnished & solvent-bearing

Wood, water-based systems

Wood, untreated

Wood, woodstained & solvent-bearing

Ceramics, glazed

Ceramics, unglazed

Plastics

Copper

Masonry

Brass

Natural/cast stone

Polyester

Aerated concrete

Plasterwork/render

Sandstone

Mirror

Zinc

l Suitable

l Pretreatment with suitable primer. Please observe current versions of product information, available at www.sopro.com

Tile grouts

Sopro DF 10® Designer tile grout

Sopro FL

Sopro Titec+ Tile grout

Sopro TFb Tile grout

Sopro Saphir® 5 Water-repellent tile grout

Sopro Brillant® Water-repellent tile grout

1 – 10 mm

2 – 20 mm

1 – 10 mm

3 – 30 mm

1 – 5 mm

1 – 10 mm

Binder

Cement

DIN EN 13 888

CG2 WA

EMICODE

EC1PLUS

EC1PLUS R

EC1PLUS (R)

l l

Generals Joint width

DGNB: highest quality level 4,  8 (see page 248)

Covering type Absorbent ceramics (earthenware tiles)

l 1)

l l

Stoneware, extruded tiles (split tiles)

l l

Fully vitrified stoneware

l l

Natural stone (discoloration-resistant)

l l

Natural stone (discoloration-sensitive)

l l

Cast stone

l l

Terracotta

l l

Glass and porcelain mosaic, tesserae, glass tiles, glass blocks

l l l l

l l l

Application Living areas, damp spaces

l l

Outdoors (facades, balconies, patios)

l l

Swimming pools/ underwater applications

l l

Heavy duty (e. g. commercial or industrial facilities)

l l

Heated substrates, e. g. with floor heating

l l

Resistance against acidic cleaners used in private households

l l

Tile fixing products

Trial grouting shall generally be performed.

l l

Adequately pre-wet earthenware tiles and their open joints.

l l

Tile grouts

Sopro FL Flexible tile grout

Sopro MFs Tile grout

Sopro MFs + b Tile grout

Sopro MFb Tile grout

Sopro TNF Natural stone grout with trass

Sopro FEP plus Epoxy tile grout

Sopro FEP

Sopro FEP 604

2 – 20 mm

2 – 5 mm

3 – 12 mm

5 – 20 mm

5 – 40 mm

2 – 12 mm

1,5 – 12 mm

2 – 12 mm

Cement

Epoxy resin

CG2 WA

CG1

CG2 WA

l l

EC1PLUS (R)

EC1PLUS R

l l

Three-component epoxy tile-grout, Special types

l l

l l l l

l l l

l l

l l only glass blocks

l l

l l l

l l

only glass blocks

l l

l l particularly recommended

l suitable

Surface fillers/renders

self-levelling

Sopro FS 15® plus 550 floor-levelling compound

Now up to 150 mm coat thickness

This is how we built the 1-m³ Sopro filigree cube

l Long

reactivatability ensures formation of unbroken surface

l Ready

to receive ceramic covering after only 2 – 3 hours

l Excellent

flow properties achieved by use of superplasticizing admixture

Tile fixing products

Surface fillers/renders

Sopro FS 15 550

Floor-levelling compound

ted to es

CT-C35-F9 N

E N 13 8

pid-hard c Ra

3°

u rel. h

ess

ry system na

hrs. ready to receive ceramic covering

ckn

ent – te r em

After

% re l . h u

it y

2–3

it y

+23

R BIN D

≥ 2 mm t

ha or c ir re st

tant sis

E LIN

HIG H

S CRY TAL

SZ-T

Surface fillers/ renders

NEW

self-levelling

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Up to 150 mm in bonded construction.

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 550-21

Floor-levelling compound

ted to es

E N 13 8

After

it y

2–3

hrs. ready to receive ceramic covering

3°

ess

% re l . h u

1,000 kg

it y

ckn

ry system na

SZ-T

+23

HIG H

≥ 2 mm t

R BIN D

ent – te r em

pid-hard c Ra

ha or c ir re st

tant sis

E LIN

Pallet weight

CT-C30-F7

S CRY TAL

Packages/pallet

Sopro FS 5 549

Bag 25 kg

u rel. h

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 549-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders

N EW

self-levelling

Sopro VS 582 self-levelling filler Surface fillers/ renders

m ber sub

pid-hard c Ra

R BIN D

rates

HIG H

lls fa

inka

ent â&#x20AC;&#x201C; te r em

ry system na

Tile fixing products

shr

As levelling coat laid to falls

suitab l lso

o in g t

rl ay

E N 13 8

S CRY TAL

E LIN

CT-C35-F7 Fo

yin g to

w shrink Lo

ooth fille m

e ag

formulation

ted to 1) es

f-levellin el g

in bonded construction Rapid-setting For indoor and outdoor use Also suitable for timber flooring

SZ-T

Surface fillers/renders Sopro VS 582 Self-levelling filler

ls al

e ag

lls fa

rates

HIG H

inka

suitab l lso

R BIN D

shr

E LIN

m ber sub

pid-hard c Ra

ent – te r em

ry system na

Lower strengths are achieved for application as self-levelling filler due to higher mixing water requirement.

o in g t

S CRY TAL

External application only in con junction with suitable waterproof membrane or, as directly usable floor surface, finished with SoproDur® HF-L 513 high-strength epoxy protective coat.

le uitab Also s flooring ber for tim

E N 13 8

w shrink Lo

ooth fille m

yin g to f

rl ay

CT-C35-F7

formulation

ted to 2) es

f-levellin el

SZ-T

Surface fillers/ renders

NEW

self-levelling

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.7 kg/m² per mm coat thickness

Order nr. Packaging 582-21

Heavy-duty floor-levelling compound

ted to es

High loadability

S CRY TAL

ry system na

ent – te r em

SZ-T

Coverage: approx. 1.7 kg/m² per mm coat thickness

E LIN

HIG H

E N 13 8

CT-C45-F11-A12 N

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Sopro HF-S 563

pid-hard c Ra

Up to 70 mm in bonded construction.

R BIN D

Order nr. Packaging 563-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Sopro FE 678

Rapidur® self-levelling screed

ted to es

E LIN

HIG H

S CRY TAL

R BIN D

ent – te r em

e ag

ratio n fro m

m oisture

bstrate

SZ-T

w shrink Lo

resistance gh

e -to-us Ready mix d scree

ry system na

Surface fillers/ renders

E N 13 8

pid-hard c Ra

DI N

CT-C25-F5-A12

shr

inka

self-levelling

Coverage: 19 – 20 kg/m² per cm screed thickness; 1,900 – 2,000 kg/m³ finished screed

NEW

Sopro FEW 698

Rapidur® self-levelling screed, white ted to es

E N 13 8

R BIN D

ent – te r em

e ag

ratio n fro m

bstrate

m oisture

SZ-T

w shrink Lo

resistance gh

e -to-us Ready eed mix scr white

ry system na

E LIN

HIG H

S CRY TAL

pid-hard c Ra

DI N

CT-C25-F5-A12

shr

inka

Coverage: 19 – 20 kg/m² per cm screed thickness; 1,900 – 2,000 kg/m³ finished screed

Tile fixing products

Order nr. Packaging 678-21

Bag 25 kg

Pallet weight

1,000 kg

Order nr. Packaging 698-21

Bag 25 kg

As special construction described in IWM e.V. (German Association of Factory-Made Mortar Manufacturers) data sheet „Self-levelling cement screeds“, for vertical live loads ≤ 2 kN/m².

Packages/pallet

Pallet weight

1,000 kg

See page 255 (Cementitious screed groups).

Surface fillers/renders

Sopro AFS 561

ted to es

CA-C25-F7 E N 13 8

Surface fillers/ renders

Anhydrite floor-levelling compound

self-levelling

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging 561-21

suitab l lso

Fibre-reinforced self-levelling filler

R BIN D

rates

ent – te r em

pid-hard c Ra

HIG H

E LIN

m ber sub

ry system na

S CRY TAL

E N 13 8

CT-C30-F7 N

Packages/pallet

Pallet weight

1,000 kg

Sopro FAS 551

ted to es

Bag 25 kg

SZ-T

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 551-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Sopro DFS ambiento® self-levelling designer floor topping

HIG H

E N 13 8

CT-C40-F10-A12 N

S CRY TAL

E LIN

ted to es

R BIN D

pid-hard c Ra

Surface fillers/ renders

High loadability

ry system na

ent – te r em

SZ-T

self-levelling

Coverage: approx. 1.7 kg/m² per mm coat thickness

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

963-21

white

Bag 25 kg

1,000 kg

964-21

silver

Bag 25 kg

1,000 kg

965-21

flanell grey

Bag 25 kg

1,000 kg

Sopro ambiento® floor colours white

Contract floor-levelling compound

SZ-T

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.6 kg/m² per mm coat thickness

E N 13 8

ry system na

pid-hard c Ra

DI N

S CRY TAL

HIG H

ted to es

E LIN

ent – te r em

CT-C25-F6

Tile fixing products

flannel grey

Self-levelling, pumpable, rapid-set, cementitious surface filler to produce smooth, level, unbroken surfaces for subsequent laying of all kinds of flooring. Suitable for floor heating systems.

Sopro OFS 543

silver

R BIN D

Order nr. Packaging 543-21

Bag 25 kg

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders

Pumpable, flow-applied, self-levelling, rapid-set, cementitious surface filler for production of smooth, unbroken surfaces prior to floor ing installation. Suitable for floor heating systems.

E N 13 8

pid-hard c Ra

SZ-T

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.6 kg/m² per mm coat thickness

NEW

R BIN D

ry system na

ent – te r em

DI N

HIG H

CT-C20-F5

S CRY TAL

E LIN

Floor-levelling compound

Surface fillers/ renders

Sopro NSC 587

ted to es

self-levelling

SoproTex 568 Floor-levelling compound scrim

Order nr. Packaging 587-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Coverage: approx. 1.1 m²/m²

Order nr. Packaging 568-01

Roll (90 cm wide) 100 m

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

approx. 327 kg

Surface fillers/renders Sopro RDS 960 Perimeter insulation strip Height 50 mm

stable

Surface fillers/ renders

Order nr. Packaging 960-01

Sopro ERS 961 Perimeter insulation strip for screeds Height 100 mm

Carton (5 rolls à 20 m)

Packages/pallet

Pallet weight

approx. 35 kg

Order nr. Packaging 961-01

NEW

Level marker pin

Carton (5 rolls à 20 m)

Tile fixing products

Pallet weight

approx. 45 kg

Self-adhesive level marker pins for precise setting out of thicker surface filler and scraed coats, up to a height of 10 cm. Ideal for marking measurement points.

Order nr. Packaging

Packages/pallet

008-01

Carton à 18 pieces

008-02

Carton (10 Bags à 18 pieces)

Surface fillers/renders Sopro RAM 3 454

R BIN D

ooth fille m

rl ay

60 m Up to

lls

hours!

S CRY TAL

Ready for ceramic tiling after only

E LIN

HIG H

Renovation and levelling mortar

o in g t

For single, full-surface application.

Coverage: approx. 1.5 kg/m² per mm coat thickness; as angle fillet/junction seal 0.4 – 0.5 kg/lfm

Sopro AMT 468 Levelling mortar with trass

enish Rh

Trass or

i g i n al

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging

Packages/pallet

Pallet weight

454-21

Bag 25 kg

1,000 kg

454-05

Bag 5 kg

200

1,000 kg

Order nr. Packaging 468-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,050 kg

Surface fillers/ renders

NEW

stable

Surface fillers/renders Sopro RS 462 Repair filler

stable

Surface fillers/ renders

Test certificates Available upon request

Coverage: approx. 1.2 kg/m² per mm coat thickness

Order nr. Packaging

Sopro SP 466

Lightweight levelling mortar

enish Rh

Trass or

i g i n al

Coverage: approx. 1.2 kg/m² per mm coat thickness

Sopro SSP Grinding filler for industrial application

Coverage: depends on application

Tile fixing products

Packages/pallet

Pallet weight

462-21

Bag 25 kg

1,000 kg

462-05

Bag 5 kg

200

1,000 kg

Order nr. Packaging 466-21

Bag 25 kg

Packages/pallet

Pallet weight

1,050 kg

Order nr. Colour

Packaging

465-21

white

Bag 25 kg

1,000 kg

463-21

grey

Bag 25 kg

1,000 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

Surface fillers/renders

Sopro RAP 2 434

R BIN D

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 434-21

Sopro SBP 474 Swimming pool render

s o ol con

lls

S CRY TAL

R BIN D

tio

rl ayin g to

E LIN

HIG H

n«

Com pl i

»Swi

without hydrated lime

ooth fille m

t hee as

ZD with B dat es PCC-mortar

Bag 25 kg

Surface fillers/ renders

S CRY TAL

E LIN

HIG H

Renovation and levelling render

stable

Packages/pallet

Pallet weight

1,000 kg

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging 474-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Sopro G 620

y le v el Q 1 4

lit

–Q

White smoothing compound

c. to DIN E N

Surface fillers/ renders

96 3

e Ty p

stable

Coverage: approx. 0.9 kg powder/m² per mm coat thickness

Order nr. Packaging

Sopro F 820

y le v el Q 1 4

lit

–Q

White filler compound

96 3

e Ty p

c. to DIN E N

Coverage: approx. 1.0 kg powder/m² per mm coat thickness

Packages/pallet

Pallet weight

620-20

Bag 20 kg

800 kg

620-04

Bag 5 kg

144

720 kg

Order nr. Packaging

Packages/pallet

Pallet weight

820-20

Bag 20 kg

800 kg

820-04

Bag 5 kg

144

720 kg

Quality levels achievable with Sopro gypsum filler compounds 1) Q 1

For surfaces not subject to visual requirements Basic surface filling, e.g. filling of butt joints between gypsum boards and overcoating of visible parts of fixings.

Q 2

Q 3

Q 4

Tile fixing products

Surface fillers/renders Sopro USW 941 White universal filler

White, sag-resistant, rapid-set, cementitious filler for universal a pplication to fill, patch, smooth, mould and model indoor and outdoor surfaces. Ideal for renovation and refurbishment contracts.

Surface fillers/ renders

• Coat thickness: 1 – 10 mm • For walls, floors and ceilings • For indoor and outdoor use • Working life: approx. 30 – 45 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: approx. 1.2 kg/m² per mm coat thickness

Soprodur® Microcement void filler

Order nr. Packaging 941-05

Bag 5 kg

Packages/pallet

Pallet weight

200

1,000 kg

Order nr. Packaging

Coverage: depends on application

Sopro GH 564 Casting resin

Packages/pallet

Pallet weight

900-30

Box (6 bags à 5 kg)

450 kg

900-48

Bucket (12 × 0.5 kg bags), incl. measuring beaker

312 kg

with 10 cross-dowels

Coverage: approx. 1.0 kg/dm³ Protect from frost during transportation and storage.

Order nr. Packaging 564-75

Pot 0.75 kg

Packages/pallet

Pallet weight

360

270 kg

N EW

Surface fillers/renders

Sopro SH 649 shaken resin

Sopro VarioFlieĂ&#x;Spachtel

Shaken Shaken Shakenâ&#x20AC;&#x201C; Shaken not stirred.

Surface fillers/ renders

2-in-1: selbst nivellierend und modellierbar faserarmiert und flexibel jetzt bis 70 mm

Shakeable crack and repair resin Fast, simple and neat application No need for mixing tools Low-odour 64

Tile fixing products

Surface fillers/renders NEW

Sopro SH 649 Shaken resin

Surface fillers/ renders

With 10 cross-dowels

NEW

Coverage: depending on substrate roughness and application method

Order nr. Packaging

Cross-dowels

Stainless-steel cross-dowels for filling/structural bonding of screed cracks and joints.

649-01

Carton (3 combi packs à 600 ml)

Packages/pallet

Pallet weight

99 (33 cartons)

288 kg

Order nr. Packaging 097-01

Carton à 200 pieces

097-02

Carton (10 bags à 200 pieces)

® FKMexible XL highly-flexible tilesystem adhesive system FKM® XL highly-fl tile adhesive

Universal application (thin-, ﬂoating-, medium-bed tilelaying and levelling coat) Substrate Existing tile covering

Stable timber substrate 1)

Substrate preparation HPS 673 bonding primer

Thin-bed laying

Floating-bed laying

Bonding layer and combed bed FKM® XL 444 highly-ﬂexible tile adhesive

Grouting Sopro DF 10® or Sopro Brillant® water-repellent tile grout

Bonding layer and combed bed FKM® XL 444 highly-ﬂexible tile adhesive

Medium-bed laying

Thin-bed laying

Product-systems

Substrate preparation Sopro GD 749

Levelling coat

Substrate Concrete (no priming required)

Timber substrates shall be overlaid with a separating layer comprising Sopro FDP 558 tile insulation board (≥ 7 mm) prior to tiling.

levelling coat with Sopro FKM® XL 444 highly-ﬂexible tile adhesive

117

highly-flexible tilesystem adhesive system Silver highly-flSilver exible tile adhesive

Universal application (thin-, ﬂoating-, medium-bed tilelaying and levelling coat) Substrate Anhydrite screed

Cement screed

Substrate preparation Sopro SG 602

Floating-bed laying

Thin-bed laying

Sopro GD 749

Bonding layer and combed bed Sopro FKM® Silver 600 or Sopro VarioFlex® Silver

System component

Grouting Sopro DF 10® or Sopro FL plus

System component

Bonding layer and combed bed Sopro FKM® Silver 600 or Sopro VarioFlex® Silver

Thin-bed laying

Medium-bed laying Levelling coat

System component

Product-systems

Substrate preparation GD 749 primer

Substrate Cement screed

118

Tile fixing products

Sopro MGR 637 multi-purpose primer is recommended for tile sizes greater than 1 m².

System component

megaFlex S2 turbo-system megaFlex S2 turbo-system

Tile laying on balconies and patios at critical +5 Â°C temperature boundary Substrate Screeds on balconies or patios (pre-wet to ensure substrate is slightly damp prior to coating, create slope with Sopro VS 582 or Sopro RAM 3 454 if necessary)

1st waterproof coat

Waterproofing TDS 823 turbo sealing slurry

2nd waterproof coat

Bonding MEG 666 megaFlex S2 turbo ďŹ&#x201A;exible tile adhesive

System component

Grouting Product-systems

Sopro FL plus

System component

119

megaFlex S2-system megaFlex S2-system

Stress-relieving tile laying on critical substrates

Substrate Mastic asphalt

Young cement screed

Existing tile covering

Substrate preparation HPS 673 bonding primer

Sopro GD 749

Bonding MEG 665 megaFlex S2 ďŹ&#x201A;exible tile adhesive

Product-systems

Grouting Sopro DF 10ÂŽ or Sopro FL plus

120

Tile fixing products

HPS 673 bonding primer

Flexible grout systems Flexible designer groutdesigner systems

Decorative grouting of glass mosaic, offering high aesthetic appeal Grouting Flexible designer tile grout Sopro DF 10ÂŽ

Grouting Flexible designer tile grout Sopro DF 10ÂŽ + silver glitter (order no. 1020)

Grouting

Product-systems

Sopro FL plus

121

MG-Flex®-system MG-Flex®-system

Highly ﬂexible, stress-relieving tile laying of large formats

Substrate Young concrete (min. 28 days old)

Stable timber substrate 1)

Substrate preparation GD 749 primer

HPS 673 bonding primer

Bonding layer and combed bed MG-Flex® 669 ﬂexible tile adhesive or MG-Flex® 679 ﬂexible tile adhesive, rapid-set

Grouting Sopro DF 10® or Sopro Brillant® water-repellent tile grout

Bonding layer and combed bed

Product-systems

MG-Flex® 669 ﬂexible tile adhesive or MG-Flex® 679 ﬂexible tile adhesive, rapid-set

Substrate preparation Sopro HPS 673

GD 749 primer

Substrate Existing tile covering

122

Tile fixing products

Wooden substrates are to be reparated prior to tile laying using Sopro FDP 558 (≥7 mm).

Young cement screed

SoproDur® HF system SoproDur® HF system

Trouble-free tile laying in highly-used industrial spaces

Substrate Concrete

Substrate preparation GD 749 primer

Floor levelling Sopro HF-S 563 ﬂoor levelling compound

Bonding Sopro VarioFlex® HF 420 ﬂexible tile adhesive or FKM® Silver 600

System component

Grouting Product-systems

Sopro Titec+ tile grout

System component

123

Terracotta system Terracotta system

Even laying of terracotta units with maximum protection against discoloration Substrate Screed (with GD 749 primer)

Bonding layer and combed bed Sopro MB 425 or Sopro MB 414 or Sopro MB 429

Grouting aid Sopro CA 737 terracotta grouting aid

Grouting Sopro FL Plus or Sopro MFb

Acid cleaning ZE 718 cement skin remover for interior use

Surface protection

Product-systems

CE 736 extra terracotta anti-stain protection

124

Tile fixing products

Final treatment

Maintenance

CD 742 terracotta wax ďŹ nish

CP 738 terracotta care concentrate

White medium-/thick-bed mortar system White medium-/thick-bed mortar system

Rapid-setting for discoloration-sensitive coverings

Substrate Concrete

Substrate preparation GD 749 primer

Bonding layer MDM 885 medium-bed/thick-bed mortar white

Grouting

Product-systems

Sopro DF 10ÂŽ

125

Marble system Marble system

Laying of natural stone units with maximum protection against discoloration Substrate Screed

Substrate preparation Sopro GD 749 primer

Bonding layer and combed bed Sopro MFK 446 ďŹ&#x201A;exible adhesive or Sopro FKM 600 or Sopro VF 419

Grouting

Product-systems

Sopro DF 10ÂŽ

126

Tile fixing products

Sopro Marble Silicon

Sopro‘s No. 1 white system Sopro‘s No. 1 white system

Laying and grouting of glass mosaic in wet spaces

Substrate Fibre cement board

Substrate preparation GD 749 primer

Waterproofing

Accessories

Sopro FDF 525 ﬂexible sealing compound

Sopro DBF 638 sealing tape Sopro DE 014/015 sealing tape for angles DWF 089 sealing collar for walls Sopro DMB 091 sealing collar for ﬂoors

1st waterproof coat

Sopro FDF 527 ﬂexible sealing compound 1)

2nd waterproof coat

Combed bed and grouting

Product-systems

Sopro’s No. 1 996 white, flexible tile adhesive or Sopro‘s No. 1 997 white, rapid-set flexible tile adhesive + 10 % FD 447 flexibilizing dispersion

Depending on water action class.

127

Tile-on-tile system Tile-on-tile system

Trouble-free tile laying on existing tile coverings

Substrate Existing tile coverings

Substrate preparation HPS 673 bonding primer

Bonding Sopro‘s No.1 ﬂexible tile adhesive or FKM® XL 444 highly-ﬂexible tile adhesive

Grouting

Product-systems

Sopro DF 10® or Sopro FL plus

128

Tile fixing products

Sopro PUK 503 system Sopro PUK 503 system

Reliable laying of natural stone units on metal substrates

Substrate Metal

Bonding and combed bed Sopro PUK 503 PU adhesive or Sopro MEG 666 adhesive

Grouting Product-systems

Sopro DF 10ÂŽ or Sopro FL plus

129

Refurbishment Refurbishment system system

Trouble-free tile laying on existing/damaged substrates

Substrate Old adhesive residue Cracks in screed ﬁlled with GH 564 from carpeting or PVC cast resin or SH 649 coverings

Substrate preparation HPS 673 bonding primer

GD 749 primer

Floor levelling FS 15® plus ﬂoor-levelling compound

Waterproofing/Insulation AEB 640 or AEB plus 639

Bonding layer and combed bed Sopro’s No.1 ﬂexible tile adhesive

VF 413 VarioFlex® tile adhesive

Grouting Product-systems

Sopro DF 10® or Sopro FL plus

130

Tile fixing products

Sanitary Silicone

Flow-applied Flow-applied filler system filler system

Self-levelling system for evening out irregular substrates

Substrate Existing combed bed

Existing tile coverings

Substrate preparation GD 749 primer

Sopro HPS 673

Floor levelling Rapidur® FE 678 or FS 15® plus ﬂoor-levelling compound

Bonding Sopro VF XL 413 VarioFlex® XL or Sopro FKM XL 444

Product-systems

Grouting Sopro DF 10® or Sopro FL plus

131

Swimming render system Swimming pool renderpool system

Rendering, patching and levelling of swimming pools according to DIN 18 535 Substrate Concrete

Substrate preparation Sopro GD 749 primer

Bonding layer Sopro‘s No.1 ﬂexible tile adhesive

Levelling Sopro SBP 474, primed with Sopro GD 749

Waterproofing Sopro DSF 423, Sopro DSF 523, Sopro DSF 623, Sopro TDS 823

1st waterprooﬁng coat

2nd waterprooﬁng coat

3rd waterprooﬁng coat

(Sopro recommendation in submerged areas)

Bonding layer and combed bed

Product-systems

Sopro‘s No.1 ﬂexible tile adhesive or Sopro MEG 667 adhesive

Grouting Sopro TF+ or Sopro TFb

132

Tile fixing products

Sanitary system Sanitary waterproofi ngwaterproofing system

Lasting protection of tile coverings in bathrooms/ damp spaces against moisture penetration according to DIN 18 534 Substrate Fibre cement board

Substrate preparation GD 749 primer

f coa erproo 1 wat st

Accessories

FDF 525 ﬂexible sealing compound

Sopro DBF 638 Pre-folded sealing tape Sopro DE 014/015 sealing tape for angles DWF 089 sealing collar for walls Sopro DMB 091 sealing collar for ﬂoors

a roof co

terp 2 wa nd

Waterproofing

FDF 527 ﬂexible sealing compound

Contrast colour: compliant with DIN 18 534

Bonding layer and combed bed Sopro’s No.1 ﬂexible tile adhesive or FKM® XL 444 Highly-ﬂexible tile adhesive

Grouting Sanitary Silicone Product-systems

Sopro Saphir® 5 water-repellent tile grout or Sopro DF 10®

Depending on water action class.

133

Balcony waterproofing Balcony waterproofi ng system system

Reliable waterprooďŹ ng for tiling on balconies and patios according to DIN 18 531 Substrate Screeds on balconies or patios (pre-wet to ensure substrate is slightly damp prior to coating, create slope with Sopro VS 582 or Sopro RAM 3 454 if necessary)

coat proof r e t a 1 w st

Waterproofing Sopro DSF 423 or Sopro TDS 823 or Sopro ZR 618

t of coa terpro a w 2 nd

Accessories Sopro DB 438 sealing tape Sopro DBF 638 pre-folded sealing tape Sopro DE 014/015 sealing tape for angles Sopro DMB 091 sealing collar for ďŹ&#x201A;oors

Bondage layer and combed bed Sopro MEG 665 megaFlex S2 adhesive or Sopro MEG 666 megaFlex S2 turbo adhesive System component

Grouting Product-systems

Sopro FL plus

System component

134

Tile fixing products

Sopro Ceramic Silicone

Reaction-resinReaction-resin waterproofiwaterproofing ng system system Chemically resistant waterproof membrane beneath ceramic coverings, e. g. in swimming pools and catering kitchens according to DIN 18 534 and DIN 18 535 Substrate Screed or plasterwork

Priming (sand-blinded) (sand-blinded)

Sopro EPG 522 epoxy primer (blinded with Sopro QS 507 ﬁne 0,1 – 0,3 mm)

1st waterproof coat

Waterproofing

Accessories

Sopro PU-FD 570/571 surface sealant (blinded with Sopro QS 511 Coarse silica sand 0,4 – 0,8 mm)

Sopro DBF 638 pre-folded sealing tape Sopro DE 014/015 sealing tape for angles DWF 089 sealing collar for walls Sopro DMB 091 sealing collar for ﬂoors Sopro FDB 524 Sopro SB 113

Combed bed DBE 500 epoxy tile adhesive

Grouting Sopro FEP 3-component epoxy SoproDur® tile grout or Sopro FEP tile grout HF-D 817 Sealant (food industry)

Sopro sanitary Silicone (wet and submerged areas)

Product-systems

2nd waterproof coat (sand-blinded)

135

® AEBng waterproofing and separating AEB® waterproofi and separating system system

Waterprooﬁng and separating membrane to critical substrates in bathroom according to DIN 18 534 Substrate Gypsum plasterboard

Substrate preparation Sopro GD 749 primer

Bonding layer and combed bed Sopro‘s No.1 ﬂexible tile adhesive or Sopro FKM XL 444

Waterproofing Sopro AEB 640 waterprooﬁng and separating membrane Sopro AEB 112/129 – 133 wall collars Racoﬁx® universal adhesive (S) 818/819 or Sopro TDS 823 turbo sealing slurry

Bonding layer and combed bed Sopro‘s No.1 ﬂexible tile adhesive or Sopro FKM XL 444

Product-systems

Grouting Sopro Saphir® 5 water-repellent tile grout or Sopro DF 10®

136

Tile fixing products

Sopro FL plus or Sopro DF 10®

AEB® plusng waterproofing and separating AEB® plus waterproofi and separating system system

Waterprooﬁng and separating system for outdoor use on balconies and patios for laying of large format tiles Substrate Screed

Existing tile covering

Substrate preparation Sopro GD 749 primer

Sopro HPS 673 bonding primer

Bonding layer and combed bed Sopro MEG 665 megaFlex S2 adhesive or Sopro MEG 666 megaFlex S2 turbo adhesive Systemkomponente

Waterproofing Sopro AEB plus 639 waterprooﬁng and separating membrane Sopro AEB 641 sealing tape Racoﬁx® universal adhesive (S) 818/819 or Sopro TDS 823 turbo sealing slurry

Bonding layer and combed bed Sopro MEG 665 megaFlex S2 adhesive or Sopro MEG 666 megaFlex S2 turbo adhesive

Product-systems

System component

Grouting Sopro DF 10®

System component

Sopro FL plus

System component

137

Separating Separating layer systemlayer system

Trouble-free tile laying on critical substrates

Substrate Cement screed with cracks

Timber ﬂoorboards

Substrate preparation GD 749 primer

HPS 673 special primer

Bonding Sopro‘s No.1 ﬂexible tile adhesive

mm ≥2

≥7

Separating layer insula 1) t nd up to

n io

Sou

FDP 558 tile insulation board 2 mm, 4 mm, 7 mm, 9 mm,12 mm

10dB*

in s ula

Grouting

Sopro‘s No.1 ﬂexible tile adhesive

Sopro FL plus

Product-systems

Laying

Benefits of tile insulation board ■ Forms stiffening, stress-free intermediate layer over deformation-sensitive substrates ■ Sound and thermally insulating ■ Formaldehyde-free The impact sound reduction is tested according to DN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site. The impact sound reduction is tested according to DIN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site. 1)

138

Tile fixing products

Impact soundand insulation and separating layer system Impact sound insulation separating layer system

Impact sound insulation and separating system below natural stone and ceramic coverings Substrate Existing tile covering

Concrete

Substrate preparation HPS 673 bonding primer

GD 749 primer

Floor levelling FS 15® plus ﬂoor-levelling compound

Bonding layer and combed bed Sopro‘s No. 1 adhesive or Sopro‘s No. 1 rapid-set 404

Impact sound insulation/separating layer Sou

insula t nd up to

n io

TEB 664 impact sound insulation and separating layer

17dB

in s ula

Bonding layer and combed bed Sopro‘s No. 1 rapid-set 404

Product-systems

MFK 446 adhesive

Grouting Sopro DF 10® or Sopro FL plus

The impact sound reduction is tested according to DN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site. The impact sound reduction is tested according to DIN EN ISO 140-8. The performance of trial installations and measurements is recommended, in each case, to establish the actual sound reduction index achievable on site. 1)

139

Impact sound insulation system Impact sound insulation system

Impact sound insulation and separating system below ceramic tile coverings Substrate Timber ﬂoorboards

Substrate preparation HPS 673 bonding primer

Bonding layer and combed bed Sopro‘s No. 1 rapid-set 404

≥ 7 mm

Impact sound insulation/separating layer

10dB

in s ula

up to

in s ula

Bonding layer and combed bed Sopro‘s No. 1 rapid-set 404

Product-systems

Grouting Sopro DF 10® or Sopro FL plus

140

Tile fixing products

16dB

insula t nd

up to

n io

insula 1) t nd

Sou

FDP 558 tile insulation board n io

Sou

TDP 565 impact sound insulation board

primer system Multi-purpose Multi-purpose primer system

Laying of large-format fully vitriﬁed stoneware units on calcium sulphate-based substrates Substrate Anhydrite screed

Substrate preparation SG 602 or Sopro MGR 637 or Sopro EPG 522, blinded with Sopro QS 511

(sand-up)

Floor levelling Sopro FS 15® plus or Sopro FS 5® ﬂoor levelling compound

Bonding layer and combed bed FKM® Silver 600 or VarioFlex® Silver 419

VarioFlex® XL 413 tile adhesive

Product-systems

Grouting Sopro DF 10® or Sopro FL plus

For tile sizes up to 1 m², use Sopro SG 602 primer-sealer. For larger formats, use Sopro MGR 637 multi-purpose primer or Sopro EPG 522 epoxy primer.

141

Epoxi primer sealer system Epoxi primer sealer system

Laying of coverings on damp bonded screeds

Substrate Concrete

Screed Bonded screed

Substrate preparation ESG 868 epoxy primer sealer (blinded with Sopro QS 511 Coarse silica sand 0.4 – 0.8 mm)

1st coat

2nd coat (sand-up with coarse silica sand)

Bonding layer and combed bed MDM 888 medium-/thick-bed tile adhesive

VarioFlex® HF 420 ﬂexible tile adhesive

Product-systems

Systemkomponente System component

Grouting Sopro DF 10®

Systemkomponente System component

142

Tile fixing products

Slimline heating system Slinline heating system

Slimline heated ﬂoor construction with optimum thermal conductivity Substrate Wood

Substrate preparation HPS 673 bonding primer

Surface filling

Combed bed

FS 15® plus or OFS 543 (when substrate is uneven)

Sopro‘s No. 1 404, rapid-set

Impact sound insulation/separating layer

10dB

up to

in s ula

16dB

insula t nd

n io

up to

Sou

insula t nd

n io

Sou

TDP 565 impact sound insulation board or FDP 558 tile insulation board

in s ula

Slimline heating system

Combed bed

FS 15® plus or Rapidur® FE

Sopro‘s No. 1 404, rapid-set

Product-systems

Surface filling

Grouting Sopro FL plus

143

Tile fixing products

Index of contents Tile adhesive – Tile adhesive coverage chart – Application matrix for Sopro tile adhesives

Tile grouts – Tile grout coverage chart – Application matrix for Sopro tile grouts – Application matrix for Sopro sealants

Surface fillers/renders – Application matrix for Sopro surface fillers/renders

Primers and bonding agents – Application matrix for Sopro primers and bonding agents

Waterproofings – Application matrix for Sopro water proofings

Accessories

Information

Gardening and landscaping products

Building chemical products

– Impact sound insulation and separating layer systems

4 23 24 28 41 47 48 50 68 70 75 76 94 96 100

Cleaning, impregnation and maintenance

102

Tiling tools

111

Tile fixing product systems

117

Bitumen products, sealing slurries and silification – Application matrix for Sopro water proofings

146 155

Screeds, binders and construction resins

166

Mortar and screed additives

177 180

– Application matrix for Sopro screeds and drainage mortars

Underground construction, gully-repair and shrinkage-compounded grouts

182

Surface fillers, renders and rapid-set mortars

184

Concrete repair

197

Primers, bonding agents cement paints and silica sands

200

Building chemical product systems

207

Drainage and bedding mortars

214

Paving grouts

219 224

– Paving grout coverage chart

Waterproofings

226

Surface gradient fillers and rapid-set mortars

230

Cleaning, impregnation and maintenance

233

Landscaping product systems

236

Conditions of sale and delivery

243

Sopro International

247

Sustainability/Quality management

248

European standards for tile adhesives and tile grouts

251

Sopro shipbuilding systems

255

Sopro grouting colours

261

Building Âchemical Âproducts

Building chemical products

Bitumen products

Sopro ZR Turbo XXL – Reactive cementitious waterproof membrane

High coverage, low consumption rate ! t h g i L a eXXtarlly high coverage

n exceptio

Reactive cementitious waterproof membrane Reliable, rapid drying Highly ﬂexible and bitumen-free External basement walls, structural refurbishment, plinth waterprooﬁng, damp-proof courses, process water tanks etc. ... Exceptionally suitable in unfavourable weather conditions 146

Building chemical products

Flexible, high-coverage, rapid-drying, reactive, two-component, cementitious waterproof membrane. For waterproofing external basement walls, applied to existing bitumen waterproofings, base areas of cavity walls, as horizontal damp-proof membrane on ground slabs, as negative-side (internal) membrane, for bonding of insulation and protective boards, for structural refurbishment, plinth waterproofing and damp-proof courses, for bonding and sealing at light well junctions, for process water tanks with up to 10 m water head, fountains and planters, and in landscape architecture. Also suitable for waterproof membranes in domestic bathrooms, and on balconies and patios. For waterproofing of solid, strong existing tile coverings on balconies and patios (tile-on-tile). Excellent sag resistance for easier application. Maximum flexibility thanks to MicroGum® technology. Very low consumption rate and outstanding workability, even in unfavourable weather conditions. May be applied to many substrates without priming. • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W1-E and W4-E to DIN 18 533, based on W2.1-E and W3-E (based on DIN 18 195 Parts 4 and 6) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Very high coverage • Reliable, rapid drying • Highly flexible and bitumen-free • Withstands 2.5 bar water pressure after only approx. 6 hours • Rainproof after only approx. 3 hours • Crack-bridging after only approx. 6 hours • Backfilling possible after only approx. 6 hours • Also suitable for application to cold and slightly damp substrates • Water-vapour-permeable • For installation of stepped and L-shaped damp-proof courses in cavity walls • For waterproofing below base areas of facing (clinker) masonry • Visual drying control through colour change • For brush, roller, trowel and spray application • UV-resistant, overcoatable and suitable as plastering/ rendering background • For walls and floors, indoors and outdoors • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro ZR 618

nsumptio co

ate nr

Low

Rapid-drying, two-component, cementitious waterproof membrane

MicroGum®Technology

pid-hard c Ra

ent – te r em

R BIN D

ry system na

Lightg!e a r t X X e covera ally high

S CRY TAL

E LIN

HIG H

High coverage

SZ-T

n exceptio

0°

Sopro Bauchemie GmbH

to -

Only powder component A.

Test certificates Available upon request

Coverage: approx. 1.2 kg/m² 1) per mm coat thickness

Order nr. Packaging

Packages/pallet

Pallet weight

618-20

Combi package 20 kg

360 kg

618-09

Combi package 9 kg

270 kg

Sopro ZR Turbo XXL ! t h g i L eXXtra igh coverage

nally h exceptio

Competitor X

Protect from frost during transportation and storage.

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Competitor Y

147

Bitumen products, sealing slurries and silification

Bitumen products

Bitumen products, sealing slurries and silification

Bitumen products Rapid-drying, one-component, solvent-free, polymer-modified b itumen coating with polystyrene foam filler used to produce flexible, crack- bridging waterproof membranes for basements. For horizontal waterproof membranes incorporated within structural elements, for waterproof barriers in cellars and buildings without basements below protective layers. Also suitable as adhesive for bonding protective, drainage and insulation panels in buried areas.

Sopro KSP 652 Waterproof basement coating

adon R Sopro Bauchemie GmbH

• Water action classes W1-E, W2.1-E, W3-E and W4-E ²) to DIN 18 533 (equivalent to DIN 18 195 Parts 4 and 6) • For indoor and outdoor use • For trowel and spray application • Rainproof after 3 – 4 hours 1) • Fully dried through after approx. 2 days 1) • Low coat thickness loss through drying • Low compressive strain through earth pressure • High coverage • Waterproof • Crack-bridging • Heat and cold resistant • Resistant to all aggressive natural substances normally encountered in and on structures • Radon-resistant

ista

hort Very s ime g-t dryin ge overa high c

Test certificates Available upon request Not as damp-proof course.

Coverage: 3.5 – 4.6 l/m² depending on load case 1)

Order nr. Packaging 652-30

Packages/pallet

Pallet weight

400 kg

Hobbock 30 ltr

Radon map of Germany: radon activity concentration in soil air > 100.000 Bq/m³ 40.000 – 100.000 Bq/m³ 20.000 – 40.000 Bq/m³ < 20.000 Bq/m³

Radon, a radioactive element occurring in the ground, accounts for a high proportion of the natural radiation to which the German population is exposed. In its gaseous state, it can infiltrate from the subsoil into buildings. Radon's decay products settle in the fine dust present in domestic interiors and subsequently impair the indoor air quality. Particularly affected are residents of buildings in regions which, due to the specific geological conditions, exhibit elevated radon concentrations. In Germany, national surveys are conducted to determine radon concentrations in the soil air. These then serve as the basis for blanket nationwide estimates of radon concentrations. Radon activity concentrations are measured in becquerels per cubic metre (Bq/m³). Radon exposure varies widely by region. The radon map provides basic guidance in identifying areas with particularly high levels. The European Commission recommends imposing limits on the maximum indoor radon concentration. Buildings can be protected against radon through the radon-proof design of ground slabs and buried walls using bituminous membranes (referred to as "black tanks" in the Germanspeaking world). Here, many of Sopro's bituminous thick coatings and the SoproThene® 878 bitumen sheet membrane provide a duly certified passive radon barrier.

Quelle: www.radon-info.de

148

Building chemical products

Protect from frost during transportation and storage.

The outlined times can vary depending on the weather conditions, wind, air and ground temperature as well as the thickness of the waterproofing.

One-component, solvent-free, polymer-modified bitumen coating with polystyrene foam filler used to produce flexible, crack-bridging waterproof membranes for basements. For horizontal waterproof membranes incorporated within structural elements, for waterproof barriers in cellars and buildings without basements below protective layers. Also suitable as adhesive for bonding protective, drainage and insulation panels in buried areas.

Sopro KD 752 One-component waterproof basement coating

• Water action classes W1-E, W3-E and W4-E ²) to DIN 18 533 (equivalent to DIN 18 195 Parts 4 and 6) • For indoor and outdoor use • For trowel and spray application • Waterproof: after approx. 5 hours 1) • Fully dried through after app. 2 days 1) • Low coat thickness loss through drying • Crack-bridging • Heat and cold resistant • Resistant to all aggressive natural substances normally encountered in and on structures Test certificates Available upon request

Not as damp-proof course.

Coverage: 3.7 – 4.9 l/m² depending on load case 1)

Order nr. Packaging

Sopro KD 754

Two-component, solvent-free, polymer-modified bitumen coating with polystyrene foam filler used to produce flexible, crack-bridging waterproof membranes. For horizontal waterproof membranes incorporated within structural elements, for waterproof barriers in cellars and buildings without basements below protective layers.

Two-component waterproof basement coating adon R

ista

Pallet weight

Hobbock 30 ltr

400 kg

752-11

Bucket 11 ltr

358 kg

• Water action classes W1-E, W2.1-E, W3-E and W4-E ²) to DIN 18 533 (equivalent to DIN 18 195 Parts 4 and 6) • For indoor and outdoor use • For trowel and spray application • Excellent sag resistance • Rainproof: after 5 –6 hours 1) • Quickly dries through • Waterproof • Crack-bridging • Heat and cold resistant

Sopro Bauchemie GmbH

Packages/pallet

752-30

Test certificates Available upon request

onent comp ged r e d cka Pow ely pa iner t a r a sep n conta withi

Not as damp-proof course.

Order nr. Packaging

Coverage: 3.5 – 4.7 l/m² depending on load case 1) Protect from frost during transportation and storage.

754-30

Hobbock 30 ltr (21.7 kg) (liquid component 26.1 ltr (15.7 kg) + powder component 6 kg, separately packed within container)

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Packages/pallet

Pallet weight

440 kg

149

Bitumen products, sealing slurries and silification

Bitumen products

Bitumen products, sealing slurries and silification

Bitumen products One-component, solvent-free bitumen coating used to produce f lexible, crack-bridging waterproof membranes. For horizontal waterproof membranes incorporated within structural elements and as adhesive for bonding protective, drainage and insulation panels in buried areas.

Sopro KMB 650 One-component flexible bitumen coating

• Water action classes W1-E, W3-E and W4-E ²) to DIN 18 533 (equivalent to DIN 18 195 Parts 4 and 6) • For indoor and outdoor use • Ready-to-use, good workability • Sprayable • For roller and brush application • For bonding insulation board • Waterproof: after approx. 7 hours 1) • Crack-bridging • Heat and cold resistant • Resistant to aggressive waters occurring naturally in ground that are liable to attack concrete

Not as damp-proof course.

Coverage: 3.9 – 5.1 l/m² depending on load case 1)

Order nr. Packaging 650-31

Two-component flexible bitumen coating

adon R

Sopro Bauchemie GmbH

Packages/pallet

Pallet weight

400 kg

Two-component, solvent-free, fibre-reinforced, polymer-modified bitumen coating used to produce flexible, crack-bridging waterproof membranes. For horizontal waterproof membranes incorporated within structural elements and as adhesive for bonding protective, drainage and insulation panels in buried areas.

Sopro KMB 651

Hobbock 30 ltr

ista

onent comp ged r e d Pow packa r ately separ n containe withi

• Water action classes W1-E, W2.1-E, W3-E and W4-E ²) to DIN 18 533 (equivalent to DIN 18 195 Parts 4 and 6) • For indoor and outdoor use • For trowel and spray application • Excellent sag resistance • Rainproof after approx. 4 hours 3) • Quickly dries through • Crack-bridging • Heat and cold resistant • Resistant to all aggressive natural substances normally encountered in and on structures Test certificates Available upon request

Not as damp-proof course.

Order nr. Packaging

Packages/pallet

Pallet weight

585 kg

Coverage: 4.2 – 5.8 kg/m² depending on load case 1)

651-30

Sopro BBS 657

Powder additive for quicker hardening of all Sopro‘s one component bituminous products such as Sopro KSP 652, Sopro KD 752 and Sopro KMB 650. In order to quickly achieve a rainproof finish and fully hardened product even at unfavourable weather conditions.

Bitumen accelerator

Hobbock 30 kg (liquid component 22 kg + powder component 8 kg, separately packed within container)

• In bag to facilitate proportioning • Suitable for all of Sopro‘s one component basement coatings

Only to be used in conjunction with Sopro‘s one component basement coatings.

150

Building chemical products

Order nr. Packaging 657-06

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Carton (6 bags à 1 kg)

Packages/pallet

Pallet weight

128

768 kg

The outlined times can vary depending on the weather conditions, wind, air and ground temperature as well as the thickness of the waterproofing.

Sopro ISA 755 Barrier and protective coating

Ready-to-use, solvent-free bitumen emulsion as barrier and protective coating for concrete, render and clay, lightweight and aerated concrete masonry. Used to protect buried areas against aggressive natural substances in ground. Suitable for dry and slightly damp substrates. • Quick-drying • Straightforward application • For brush, roller or spray application

Order nr. Packaging

Packages/pallet

Pallet weight

755-50

Hobbock 30 kg

360 kg

Coverage: 150 – 200 g/m²

755-11

Bucket 10 kg

400 kg

755-43

Bucket 5 kg

400 kg

Sopro KDG 751

Solvent-free, bitumen-emulsion-based primer concentrate for t hinning with water before use. Used as primer on mineral s ubstrates for subsequent treatment with Sopro KD 752 one-component waterproof basement coating, Sopro KSP 652 waterproof basement coating and Sopro KD 754 two-component waterproof basement coating. No flammable or harmful vapours when applied.

ent nc ra

lu t

• For outdoor use • High coverage as thinnable with water up to a proportion of 1 : 10 • For roller, brush or spray application • Easy to use

m u st

r1 : 1 0!

Primer for basement waterproofing

e d w ith w

Coverage: 200 – 300 g/m² (concentrate thinned with water)

Sopro KDV 681 Primer for basement waterproofing

Order nr. Packaging 751-43

Bucket 5 kg

Packages/pallet

Pallet weight

400 kg

Universal, ready-to-use, low-odour, solvent-free, bitumen emulsion-based primer. For pretreatment of absorbent and mineral substrates prior to application of Sopro KSP 652, Sopro KD 752, Sopro KD 754, Sopro KMB 650 and Sopro KMB 651 waterproof bitumen coatings. • For indoor and outdoor use • Ready-to-use • Straightforward application • Adhesion promoter • For brush, roller or spray application

Order nr. Packaging

Coverage: 100 – 200 ml/m² Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

681-25

Canister 25 ltr

600 kg

681-10

Canister 10 ltr

600 kg

151

Bitumen products, sealing slurries and silification

Bitumen products

Bitumen products, sealing slurries and silification

Bitumen products Sopro BVA 759 Bitumen primer

Ready-to-use, quick-drying, one-component, solvent-free bitumen primer for substrate preparation prior to application of bitumen, roof and torch-on sheet membranes. Also suitable as adhesion-promoting primer prior to application of Sopro BIS 766 bitumen filler, Sopro BKK 660 cold-applied bitumen adhesive and Sopro BDL 661 bitumen roof paint. Ideal for application to old bitumen coatings and sheet membranes. May also be applied to concrete, flush-jointed masonry and render. • Drying time: approx. 15 minutes • Used to promote adhesion • Cold-applied • Ready-to-use, good workability • For roller, brush and spray application

Packages/pallet

Pallet weight

Coverage: 150 – 200 ml/m²

Order nr. Packaging 759-25

Canister 25 ltr

600 kg

759-10

Canister 10 ltr

600 kg

SoproThene® primer

Special high-grade, low-odour, ready-to-use, solvent-free, bitumen emulsion-based primer. For preparation of mineral substrates for subsequent waterproofing with SoproThene® bitumen sheet membrane. Improves adhesion to substrate. • For indoor and outdoor use • Drying time: approx. 45 minutes • For dry and slightly damp substrates • Promotes adhesion • For roller, brush and spray application • Ready-to-use, straightforward application

Packages/pallet

Pallet weight

Coverage: 100 – 150 ml/m²

Order nr. Packaging 879-10

Bucket 10 ltr

320 kg

879-05

Bucket 5 ltr

300 kg

Mixing attachment for bitumen

Mixing attachment with a hexagon rod for mixing waterproof b itumen coatings, e. g. Sopro KD 752 one-component waterproof basement coating, Sopro KSP 652 waterproof basement coating and Sopro KD 754 two-component waterproof basement coating. Suitable for fitting to drill. Size: 160 × 160 × 600 mm

Order nr. Packaging 018-01

152

Building chemical products

Protect from frost during transportation and storage.

Unit

Bitumen products, sealing slurries and silification

With our seal of approval!

All-in structural waterproofing display 153

Bitumen products, sealing slurries and silification

Bitumen products SoproThene® 878 Bitumen sheet membrane

adon R

ista

Self-adhesive, flexible, crack-bridging, radon-resistant bitumen sheet membrane comprising polymer-modified bitumen on tear-resistant carrier film. Used to produce flexible waterproof membranes for basements. Likewise used for horizontal waterproof membranes incorporated within structural elements. For waterproofing external basement walls, balconies and patios. Substrates shall be pretreated with S oproThene® primer. • Water action classes W1-E and W4-E to DIN 18 533 (equivalent to DIN 18 195 Part 4) • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • For indoor and outdoor use, walls and floors • Flexible and crack-bridging • Self-adhesive • Immediately waterproof and resistant to driving rain • Application temperature: -5 °C to +30 °C Test certificates Available upon request

Order nr. Packaging

Coverage: approx. 1,1 m²/m²

SoproThene® Corner tape

Packages/pallet

Pallet weight

approx. 397 kg

878-01

Roll (100 cm wide) 15 m1)

878-02

Roll (100 cm wide) 5 m 1)

approx. 226 kg

878-04

Roll (30 cm wide) 15 m

approx. 359 kg

878-03

Roll (15 cm wide) 15 m

approx. 359 kg

Self-adhesive, flexible, crack-bridging, polymer-modified bitumen corner tape applied to a tear-resistant carrier film. Coated with two 50 mm wide vulcanization strips comprising a pure bitumen compound. For use in conjunction with SoproThene® bitumen sheet membrane for reliable sealing at corners, internal/external angles and ground slab/basement wall junctions. Order nr. Packaging 878-09

SoproThene® Adhesive tape

Roll (300 mm wide) 15 m, 1,5 mm thickness

Self-adhesive, tear-resistant adhesive tape comprising polythene carrier film coated on both sides with strongly adhesive bitumen-rubber compound, for reliable sealing of corners and complicated details such as pipe penetrations, edges, floor outlets, in conjunction with SoproThene bitumen sheet membrane. Also suitable for fixing insulation or drainage mats onto SoproThene® bitumen sheet membrane.

Order nr. Packaging 878-08

SoproThene® Nonwoven edging tape

Roll (100 mm wide) 15 m, 1 mm thickness

Self-adhesive, crack-bridging, butyl-rubber-based universal s ealing tape used in conjunction with SoproThene® bitumen sheet membrane for sealing upper vertical terminations and horizontal terminations of membrane. The outer side is faced with a synthetic nonwoven to provide good plaster key or as base for adhesive-fixed finishes. Order nr. Packaging 878-06

SoproThene® Aluminium edging tape

Roll (100 mm wide) 25 m, 1,5 mm thickness

Self-adhesive, UV-resistant aluminium edging tape coated with strongly adhesive bitumen-rubber compound and used in conjunction with SoproThene® bitumen sheet membrane for sealing upper vertical terminations and horizontal terminations of membrane.

Order nr. Packaging 878-07

154

Building chemical products

Roll (100 mm wide) 15 m, 1,5 mm thickness

Bitumen products, sealing slurries and silification

Application matrix waterproofings DIN 18 533

DIN standard

Waterproofing of elements in contact with soil

W1.1-E

W1.2-E

W2.1-E

W3-E

W4-E

Ground moisture and water without hydrostatic pressure acting on ground slabs and buried walls

Ground moisture and water without hydrostatic pressure acting on ground slabs and buried walls, with drainage

Moderate water pressure action, with ≤ 3 m immersion depth

Water without hydro static pressure acting on buried suspended slabs

Splash water and ground moisture acting on wall plinth, and capillary water in and under walls

Sopro KMB 650

Sopro KMB 651

Sopro KD 752

ISopro KD 754

Sopro KSP 652

SoproThene® 878

Sopro TDS 823

l 2)

Sopro ZR 618

l 2)

(Water) action class

l 1) 2) 3)

In line with DIN standard

l 3)

l 1)

l 3)

l 1)

l 3)

l 1)

l 3)

l 1)

l 3)

l 1)

l As special construction

Not as damp-proof course. Flexible, mineral sealing slurries to DIN 18 533-3: only crack class R1-E and space use classes RN1-E to RN2-E. Embedment of Sopro KDA 662 scrim for basement waterproofing is required.

155

Bitumen products, sealing slurries and silification

Bitumen products Sopro BIS 766 Bitumen filler

Used for waterproofing structures in contact with ground (to AIB) to provide barrier against ground moisture and non-accumulating seepage water. Applied to cellar/basement walls and to foundations. Also suitable for waterproofing and maintenance of bituminous roof coverings to protect against damp and wetness, and for repairing and sealing defects at openings, terminations and pipe penetrations. Suitable substrates are: concrete, masonry, plaster, metal, wood, surfaces with old bitumen coatings and bituminous roof sheet membranes. • For outdoor use • Weatherproof • Sag-resistant with good adhesion • Fibre-reinforced • For spatula application • Solvent-free

e ailabl so av 0 g l a w 31 No tridge in car

Order nr. Packaging

Packages/pallet

Pallet weight

Coverage: approx. 1.0 kg/m² per mm coat thickness

766-05

Bucket 5 kg

300 kg

766-81

Pot 1 kg

384

384 kg

766-71

Cartridge 310 g

1.200

372 kg

Sopro BKK 660

Ready-to-use cold-applied bitumen adhesive for bonding bitumen roof sheet membranes and waterproofing old and new bitumen roofing felt. For brush or spatula application to concrete, plaster or heat and cold- resistant bitumen roofing felt. Sopro BKK 660 a dhesive can be cold- applied by spatula and is viscoplastic after evaporation of the solvent. Only for flatroofs with a roofslope of max. 5 °.

Cold-applied bitumen adhesive

NEW

• For outdoor use • Heat-resistant, no embrittlement, no flaking • Waterproof and weather-resistant • Resistant to diluted acids, alkaline solutions, salts, aggressive natural substances etc. • Solvent-free

Packages/pallet

Pallet weight

Coverage: 300 – 500 g/m²

Order nr. Packaging 660-10

Bucket 10 kg

440 kg

660-05

Bucket 5 kg

300 kg

Sopro BDL 661

Ready-to-use, rapid-drying proofing and protective coating for old and new bitumen roofing felt, bitumen shingles, mineral roof coverings, wood and metal roofing and old bitumen coatings.

Bitumen roof paint

• For outdoor use • Heat-resistant, no embrittlement, no flaking • Water-repellent and weather-resistant • May be applied cold • For roller, brush or spray application • Solvent-free

Order nr. Packaging

Coverage: 400 – 500 ml/m²

156

Building chemical products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

661-30

Hobbock 30 ltr

540 kg

661-05

Bucket 5 ltr

300 kg

Sopro KDA 662 Scrim for basement waterproofing

Bitumen- and alkali-resistant, plastics-sheathed glass-fibre fabric used as reinforcement and to regulate coat thickness for flexible, crack-bridging waterproof bitumen basement coatings applied as barrier against external water pressure and accumulating seepage water. Used with Sopro KSP 652 waterproof basement coating, Sopro KD 752 one-component and Sopro KD 754 two-component waterproof basement coatings, Sopro KMB 650 one-component and Sopro KMB 651 two-component flexible bitumen coatings. • For indoor and outdoor use • Scrim to DIN 18 533 (equivalent to DIN 18 185 Part 6) • Mesh size 4 × 4 mm • Water- and weather-resistant • For reinforcement of internal/external angles • For improved crack bridging • Straightforward application

Packages/pallet

Pallet weight

Coverage: approx. 1.1 m²/m²

Order nr. Packaging 662-01

Roll (100 cm wide) 50 m

approx. 256 kg

662-02

Roll (50 cm wide) 50 m

approx. 242 kg

Sopro KDS 663

Bitumen-compatible, polystyrene drainage and protective mat with load-spreading sheet backing and compression-resistant p olypropylene nonwoven filter. Ideal for protection of Sopro KSP 652, Sopro KD 752 and Sopro KD 754 waterproof basement coatings, Sopro KMB 650 and Sopro KMB 651 flexible bitumen coatings and SoproThene® bitumen sheet membranes. The load-spreading sheet backing guarantees reliable protection even in the event of subsequent floor movement or settlement. Meets requirements for protective layers to DIN 18 533 and for drainage provision for protection of construction works to DIN 4095. Also complies with guidelines for design and installation of waterproof polymer-modified bitumen coatings.

Basement drainage mat 6 mm

• Protective layer to DIN 18 533 (equivalent to DIN 18 185 Part 10) • Withstands high compressive loads • Protects against damaging action from ground • Reliable vertical drainage • Resists clogging • Rotproof • Resistant to chemicals commonly encountered in ground • CE conformity marking to DIN EN 13 252 • Stud height approx. 6 mm • Size 1.25 × 14 m (17.5 m²) Test certificate Available upon request

Coverage: approx. 1.1 m²/m²

Order nr. Packaging 663-01

Roll (125 cm wide) 14 m

Packages/pallet

Pallet weight

approx. 75 kg

157

Bitumen products, sealing slurries and silification

Bitumen products

Bitumen products, sealing slurries and silification

Bitumen products Sopro KDB 756 Sealing strip for basement waterproofing

Sealing tape made out of polypropylen (elastic polypropylen) for bridging structural joints in conjunction with Sopro waterproof basement coatings, e. g. Sopro KSP 652, Sopro KD 752 and Sopro KD 754. • For outdoor use • For walls and floors • Flexible • For movement and separation joints • Easy-to-use

Order nr. Packaging 756-01

NEW

Sopro FDB 524 Flexible sealing tape 350 mm wide

Roll (240 mm wide) 10 m

Coverage: approx. 1.1 m/m

Order nr. Packaging

Sopro ÖS

Ready-to-use, special, synthetic resin paint for sealing and coating bunds, catchpits and catchment spaces for light heating oil, diesel fuel and unused engine and gear oils in private and all commercial spaces. F acilitates pumping or wiping off of leakages from coated surface.

524-35

Oil barrier

Roll (350 mm wide) 25 m

• For indoor use • For walls and floors • Crack-bridging • Rapid-drying • Ready-to-use • One-component • Visual control of paint coats through contrast colours

Sopro Bauchemie GmbH

Standard colour

Test certificate

Available upon request

ÖS 635

grey

Contrast colour

reddish brown ÖS 636

Order nr.

Coverage: approx. 0.9 l/m²

158

Building chemical products

Protect from frost during transportation and storage.

Packaging

Packages/pallet

Pallet weight

635-08

grey

Bucket 5 ltr

416 kg

636-08

reddish brown

Bucket 5 ltr

416 kg

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Flexible, one-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable as waterproof membrane for use on balconies and patios, in showers, washrooms, toilets and swimming pools. For internal coating of process water tanks with max. 4 m water depth.

Sopro DSF 523 One-component flexible sealing slurry

Sopro Bauchemie GmbH

Test certificates Available upon request

Coverage: approx. 1.4 kg/m² per mm coat thickness 1)

Order nr. Packaging

Sopro DSF 623

One-component flexible rapid-set sealing slurry

Packages/pallet

Pallet weight

523-20

Bag 20 kg

1,000 kg

523-10

Bag 10 kg

700 kg

• For walls and floors, indoors and outdoors • Based on action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action class W1-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Working life: approx. 50 minutes • Quick-drying (approx. 2 hours per coat) • Also suitable for process water tanks • Water-vapour-permeable • For brush, roller, trowel and spray application • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro Bauchemie GmbH

Test certificates Available upon request

Coverage: approx. 1.4 kg/m² per mm coat thickness 1)

Order nr. Packaging

Packages/pallet

Pallet weight

623-20

Bag 20 kg

1,000 kg

623-10

Bag 10 kg

700 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

159

Bitumen products, sealing slurries and silification

Sealing slurries

Bitumen products, sealing slurries and silification

Sealing slurries High-performance, flexible, rapid-set, two-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable for use in wet spaces, swimming pools, and on balconies and patios. For structural waterproofing and internal coating of process water tanks with max. 10 m water depth. Twocomponent system ensures weather-independent drying. Maximum flexibility thanks to MicroGum® technology. Very low consumption rate. Creamy consistency allows smooth application.

Sopro TDS 823 Two-component turbo sealing slurry

Sopro Bauchemie GmbH

MicroGum®Technology

C 0°

R BIN D

to -

ry system na

ent – te r em

pid-hard c Ra

E LIN

HIG H

S CRY TAL

SZ-T

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Only powder component A.

Order nr. Packaging

Coverage: approx. 1.6 kg/m² per mm coat thickness 1)

Packages/pallet

Pallet weight

823-10

Duo Pack 20 kg: Bag 10 kg with powder component A

630 kg

823-44

Canister 10 kg with liquid component B

600 kg

823-01

Duo Pack 9 kg: Bag 4,5 kg with powder component A

200

900 kg

823-02

Canister 4,5 kg with liquid component B

405 kg

Protective, flexible, stainless-steel fabric tape. For reliable, longterm protection at perimeter and movement joints in waterproof membranes during cutting-out and renewal of silicone sealants.

Sopro SB 113 Cut protection tape

Coverage: approx. 1.05 m/m

160

Building chemical products

Protect from frost during transportation and storage.

Order nr. Packaging 113-01

Roll (50 mm wide) 10 m

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Flexible, two-component, fibre-reinforced, cementitious sealing slurry. Suitable as waterproof membrane for use on balconies and patios, in showers, washrooms, toilets and swimming pools. For waterproofing of solid, strong existing tile coverings on balconies and patios (tile-on-tile). For internal coating of process water tanks with max. 6 m water depth.

Sopro DSF 423 Two-component flexible sealing slurry

0°

Sopro Bauchemie GmbH

to -

Order nr. Packaging

Coverage: approx. 2.0 kg/m² per mm coat thickness 1)

Packages/pallet

Pallet weight

423-23

Duo Pack 32 kg: 32 kg packaging comprises: Bag 24 kg with powder component A

960 kg

423-43

Canister 8 kg with liquid component B

480 kg

Cementitious sealing slurry used to provide waterproof barrier against surface and seepage not subject to hydrostatic pressure on masonry, concrete and plasterwork. Used for new-build and refurbishment schemes in building construction and civil engineering, and process water tanks with max. 5 m water depth.

Sopro DS 422 Sealing slurry

• For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: 3 – 6 kg/m² depending on application and duty Protect from frost during transportation and storage.

Order nr. Packaging 422-21

Bag 25 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Packages/pallet

Pallet weight

1,000 kg

161

Bitumen products, sealing slurries and silification

Sealing slurries

Bitumen products, sealing slurries and silification

Sopro WB 588 Injection damp-proof course

Highly flexible, ready-to-use, solvent-free, polymer-based, one-component universal waterproof membrane. For a wide variety of domestic applications. For refurbishment and renovation, indoors and outdoors, for patching defects, repairs to roof tiles, sealing at junctions with doors and windows, rooftop junctions and connections, and repairs to rainwater gutters. Suitable for many types of surface, e.g. concrete, wood, stone, metal, sanded roofing felt, and numerous synthetic materials, e.g. polystyrene. Ready-to-use Highly flexible • Short drying time • Rainproof after only approx. 2 hours • For walls and floors, indoors and outdoors • Overcoatable • UV-resistant • Also for use on damp surfaces • Water-vapour-permeable • •

Order nr. Packaging

Coverage: approx. 1.4 kg/m² per mm coat thickness

Packages/pallet

Pallet weight

210

approx. 732 kg

Pot 1 kg

648

approx. 684 kg

Cartridge 438 g

1200

approx. 648 kg

588-03

Pot 3 kg

588-01 588-71

Racofix® WaterBlock – Applications

Waterproofing and repairs to roof tiles

Waterproofing at chimney stack junctions

Waterproofing and repairs to gutters

Waterproofing at rooftop junctions and connections

Waterproofing at junctions with window frames

Waterproofing of cracks and defects

162

Building chemical products

Protect from frost during transportation and storage.

Bitumen products, sealing slurries and silification

Sealings

Sopro WB 588 Racoﬁx® WaterBlock

Help is at hand! The rapid-acting hybrid waterproof membrane for acute leaks! l

For walls and ﬂoors, indoors and outdoors

Ready-to-use

Highly ﬂexible

Solvent-free

Highly crack-bridging

Short drying time

Rainproof after only approx. 2 hours

Also for use on damp surfaces

Water-vapour-permeable

163

Bitumen products, sealing slurries and silification

Silification Sopro VK 690 Injection damp-proof course

Solvent-free, one-component damp-proofing concentrate based on special silicates and water-repellent additives. Injected into existing structures to provide horizontal damp-proof course to protect against rising damp in masonry. Also suitable as a surface coating for impregnation of absorbent building materials and for surface preparation prior to plastering and painting. For the permanent drying out of damp walls. • For indoor and outdoor use • Prevents rising damp • Prevents efflorescence • Prevents damp masonry

Coverage: approx. 2.5 kg per metre and 10 cm wall thickness, depending on masonry suction

Order nr. Packaging

Sopro BLS 689

Horizontal damp-proof course 1). For filling voids and fissures in substrate. Also serves as accelerator for Sopro VK 690 injection damp-proof course and for plugging drill holes after installation. Suitable for all types of mineral building fabric, e. g. masonry, concrete, stone and rock.

Drill hole grout

Packages/pallet

Pallet weight

690-30

Canister 30 kg

480 kg

690-10

Canister 10 kg

600 kg

690-03

Canister 3 kg

270 kg

• For indoor and outdoor use • For prevention of rising damp • For protection against efflorescence • For prevention of damp masonry • As primer for following coatings • Stabilizes friable plasterwork/render

Coverage: approx. 1.0 kg/l void

Order nr. Packaging

Sopro VKT 020

Injection funnel for Sopro VK 690, which is incorporated as h orizontal damp-proof course in existing structures to protect against rising damp in masonry. Used in conjunction with Sopro VK 690 injection damp-proof course for the permanent drying out of damp walls in basements/cellars, shafts, basement car parks, water containers and sewers. Suitable for masonry, concrete, stone and rock. Strengthens and preserves original building fabric and durably prevents efflorescence and mould.

Damp-proof course injection funnel

689-30

Box 30 kg (6 bags à 5 kg)

• For indoor and outdoor use • Prevents rising damp • Prevents efflorescence • Prevents damp masonry

Coverage: 7 – 24 funnels per metre, depending on wall thickness

164

Building chemical products

Protect from frost during t ransportation and storage.

Order nr. Packaging 020-01

Single file ()funnels

Packages/pallet

Pallet weight

450 kg

Sopro Racofix® WSM 680 Water-stop mortar

Cementitious water-stop mortar used to plug water leaks, e. g. in basements and shafts, and burst pipes. Especially useful against water pressure. When mixed with water, Racofix® water-stop mortar forms a plastic, thixotropic and easily applicable paste. Particularly suitable for plugging drillholes following installation of Sopro VK 690 injection dampproof course. • Plugs water leaks in seconds • Sets within 90 seconds • High water impermeability • Chloride-free

Coverage: 1.8 kg/lmortar for 1 ltr void

Order nr. Packaging

Sopro FAD 712

One-component, solvent-free siloxane compound for water-vapourpermeable impregnation of mineral facade materials, plasters/renders, limestone, clay brickwork/blockwork, unglazed clinker and fibre-cement products, mineral paintwork, to protect against driving rain.

Facade impregnation agent

680-05

Bucket 5 kg

Packages/pallet

Pallet weight

225 kg

• For outdoor use only • For roller, brush or spray application

Coverage: 0.1 – 0.5 l/m² on concrete; 0.5 – 1.2 l/m² on mineral substrates

Order nr. Packaging 712-83

Canister 6 ltr

Packages/pallet

Pallet weight

446 kg

165

Bitumen products, sealing slurries and silification

Sealings

Screeds Rapidur® B 1 turbo

bstrate

m oisture

ratio n fro m

R BIN D

HIG H

ent – te r em

ry system na

resistance gh

E N 13 8

DI N

CT-C50-F6

S CRY TAL

pid-hard c Ra

ted to 1) es

E LIN

Rapid-set screed binder

SZ-T

e ag

w shrink Lo

r Binde

shr

inka

High loadability

Mixing ratio 1 : 4 (25 kg Rapidur® B1 turbo : 100 kg gravel sand 0 – 8  mm, according to DIN EN 12 620)

Coverage: (MV 1 : 4) approx. 4.0 kg/m² per cm coat thickness; approx. 400 kg/m³

Special, polymer-modified, ternary binder for production of highstrength, extra-rapid-set cement screeds to DIN 18560, allowing early flooring installation. Achieves grade CT-C50-F6 after 28 days 1). Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying. Site-mixed with suitably graded (e.g. 0 – 8 mm) gravel sand for screeds to DIN EN 12 620. May be applied in mixing ratios 1 : 4 and 1 : 5. 2) • Ready for tiling: after 6 – 12 hours depending on mixing ratio and site conditions • Ready to receive particularly impervious floor coverings, e.g. linoleum, PVC etc., and wood or parquet flooring after achievement of residual moisture content ≤ 1.8% CM • For indoor and outdoor use • Extra-low shrinkage • Extra-rapid progress on site • Allows early loading • Excellent workability properties • Working life: 30 – 45 minutes 1) • Walkable: after 2 – 3 hours 1) • High resistance to moisture migration from substrate • Suitable for floor heating systems • Pumpable • Heating system commissioning: after approx. 1 day • Suitable Sopro perimeter insulation strip on page 179 • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Packaging 760-25

Packages/pallet

Pallet weight

1,000 kg

Bag 25 kg

Sopro Rapidur® B 1 turbo rapid-set screed binder

A number-one performer l Extra-low shrinkage l For early tiling after 6 – 12 hours l For early walkability after 2 – 3 hours l For early mechanical strength l High strength: CT-C50-F6 l High crystalline water binding capacity l High resistance to moisture migration back into screed l Outstanding workability

166

Building chemical products

Please observe technical product information.

See page 255 (Cementitious screed groups).

Screeds

pid-hard c Ra

bstrate

ratio n fro m

ry system na

m oisture

R BIN D

ent – te r em

resistance gh

• Ready for tiling: after 24 – 48 hours, depending on mixing ratio and site conditions • Ready to receive particularly impervious floor coverings, e.g. linoleum, PVC etc., and wood or parquet flooring after achievement of residual moisture content ≤ 1.8% CM • For indoor and outdoor use • Extra-low shrinkage • Working life: 40 – 60 minutes • Walkable: after 3 – 4 hours • High resistance to moisture migration from substrate • Suitable for floor heating systems • Pumpable • Heating system commissioning: after approx. 2 days • Suitable Sopro perimeter insulation strip on page 179 • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

E N 13 8

CT-C40-F6 N

S CRY TAL

HIG H

ted to es

E LIN

Rapid-set screed binder

SZ-T

e ag

w shrink Lo

shr

r Binde

inka

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: (MV 1 : 4) approx. 4.0 kg/m² per cm coat thickness; approx. 400 kg/m³

Order nr. Packaging 768-21

resistance gh

High loadability

bstrate

E N 13 8

Pallet weight

1,000 kg

• Ready for tiling: after approx. 3 days, depending on mixing ratio and site conditions • Ready to receive particularly impervious floor coverings, e.g. linoleum, PVC etc., and wood or parquet flooring after achievement of residual moisture content ≤ 1.8% CM • For indoor and outdoor use • Long working life: 2 – 3 hours 1) • Walkable: after 7 – 8 hours 1) • High resistance to moisture migration from substrate • Suitable for floor heating systems • Pumpable • Heating system commissioning: after approx. 3 days • Suitable Sopro perimeter insulation strip on page 179 • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

m oisture

DI N

Rapid-set screed binder

CT-C45-F7

Packages/pallet

Special, polymer-modified binder for particularly economical production of high-strength, rapid-set cement screeds to DIN 18 560, allowing early flooring installation. Achieves grade CT-C45-F7 after 28 days 1). Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying. Site-mixed with suitably graded (e.g. 0 – 8 mm) gravel sand for screeds to DIN EN 12 620. May be applied in mixing ratios 1 : 4 and 1 : 5 2).

Rapidur® B 5

ted to 1) es

Bag 25 kg

ratio n fro m

Binde

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Mixing ratio 1 : 5 (25 kg Rapidur® B5 : 125 kg gravel sand 0 – 8  mm, according to DIN EN 12 620)

Please observe technical product information.

Coverage: (MV 1 : 5) approx. 3.5 kg/m² per cm coat thickness; approx. 350 kg/m³

Order nr. Packaging 767-21

Bag 25 kg

See page 255 (Cementitious screed groups).

Packages/pallet

Pallet weight

1,000 kg

167

Screeds

Special, polymer-modified, ternary binder for particularly economical production of high-strength, rapid-set cement screeds to DIN 18 560, allowing early flooring installation . Achieves grade CT-C40-F6 after 28 days. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying. Site-mixed with suitably graded (e.g. 0 – 8 mm) gravel sand for screeds to DIN EN 12 620. May be applied in mixing ratio 1 : 4.

Rapidur® B 3

Screeds Polymer-modified, ready-to-use dry mix, CT-C50-F7 to DIN EN 13813, for production of rapid-set cement screeds allowing early flooring installation. No addition of sand necessary. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying. New quality for improved workability. Also suitable for use as finished floor surface.

Rapidur® M 1

pid-hard c Ra

bstrate

su ratio n fro m

ry system na

m oisture

R BIN D

ent – te r em

resistance gh

Screeds

E N 13 8

• Ready for tiling: after approx. 4 hours, ready to receive particularly impervious floor coverings, e.g. linoleum, PVC etc., and wood or parquet flooring after achievement of residual moisture content ≤ 1.8% CM • For indoor and outdoor use • Working life: 45 – 60 minutes • Walkable: after approx. 3 hours • High resistance to moisture migration from substrate • Coat thickness: 12 – 80 mm • Suitable for floor heating systems • Pumpable • Heating system commissioning: after approx. 1 day • Grain size between 0 – 4 mm • Adapted perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII

CT-C50-F7-A12 N

S CRY TAL

HIG H

ted to es

E LIN

Rapid-set screed mortar

SZ-T

e ag

w shrink Lo

e -to-us Ready mix d scree

shr

inka

High loadability

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: 18 – 20 kg/m² per cm screed thickness; 1,800 – 2,000 kg/m³

Order nr. Packaging 769-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Days

Start of heating system commissioning Conventional cement screeds

after approx. 21 days after approx. 7 days

Calcium sulphate screeds after approx. 1 day

Sopro Rapidur® B 1 turbo

after approx. 2 days

Sopro Rapidur® B 3

after approx. 3 days

Sopro Rapidur® B 5 Sopro Rapidur® FE

after approx. 1 day

Sopro Rapidur® M 1

after approx. 1 day after approx. 3 days

Sopro Rapidur® M 5

after approx. 5 days

Sopro Rapidur® M 8

168

Building chemical products

See page 255 (Cementitious screed groups).

Screeds

Rapid-set screed mortar

sted to Te

bstrate

E N 13 8

m oisture

CT-C40-F6-A9 N

resistance gh

ratio n fro m

e -to-us Ready mix d scree

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: 18 – 20 kg/m² per cm screed thickness; 1,800 – 2,000 kg/m³

NEW

• Ready for tiling: after approx. 24 hours, ready to receive particularly impervious floor coverings, e.g. linoleum, PVC etc., and wood or parquet flooring after achievement of residual moisture content ≤ 1.8% CM • For indoor and outdoor use • Working life: 3 – 4 hours • Walkable: after approx. 12 hours • High resistance to moisture migration from substrate • Coat thickness: 12 – 100 mm • Suitable for floor heating systems • Pumpable • Heating system commissioning: after approx. 3 days • Grain size between 0 – 4 mm • Adapted perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Rapidur® M 8

Rapid-set screed mortar ted to es

DI N

CT-C25-F4-A12 E N 13 8

e -to-us Ready mix d scree

Coverage: 19 – 21 kg/m² per cm screed thickness; 1,900 – 2,100 kg/m³

Order nr. Packaging 747-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Ready-to-use, polymer-modified screed mix for particularly economical production of rapid-set cement screeds allowing early flooring installation. Achieves grade CT-C16-F3 to DIN EN 13 813 after 7 days, grade CT-C25-F4 after 28 days. No extra sand needs to be added. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Also suitable for use as finished floor surface. • Ready for tiling: after 48 – 72 hours, ready to receive particularly impervious floor coverings, e.g. linoleum, PVC etc., and wood or parquet flooring after achievement of residual moisture content ≤ 1.8% CM • For indoor and outdoor use • Working life: 4 – 5 hours • Walkable: after approx. 24 hours • High resistance to moisture migration from substrate • Coat thickness: 20 – 100 mm • Suitable for floor heating systems • Pumpable • Heating system commissioning: after approx. 5 days • Grain size: 0 – 4 mm • Adapted perimeter insulation stripe • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Order nr. Packaging 601-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

169

Screeds

Polymer-modified, ready-to-use dry mix, CT-C40-F6 to DIN EN 13813, for particularly economical production of rapid-set cement screeds allow ing early flooring installation. No addition of sand necessary. Suitable for heated screeds, bonded screeds, unbonded screeds and floating screeds. Particularly useful for fast-track or tightly scheduled screed laying. Also suitable for use as finished floor surface.

Rapidur® M 5

Screeds

Sopro Rapidur FE T

Self-levelling screed ted to es

CT-C25-F5-A12 E N 13 8

E LIN

HIG H

S CRY TAL

R BIN D

m oisture

bstrate

resistance gh

ratio n fro m

e ag

w shrink Lo

shr

inka

ry system na

ent – te r em

pid-hard c Ra

Screeds

Coat thickness 20 –70 mm 1) Suitable for a various number of ﬂoor heating systems

SZ-T

Ideal for renovation and refurbishment Ready for tiling: after approx. 24 hours Extremely even surface, ideal for large format tiles Pumpable, efﬁcient use also on larger projects 1)

170

Building chemical products

Coat thicknesses on bonded screeds 20 –70 mm/coat thicknesses on separating layer/insulation layer 35 –70 mm

Screeds

Rapidur® self-levelling screed

ted to es

EN 1

R BIN D

ent – te r em

e ag

ratio n fro m

m oisture

bstrate

SZ-T

w shrink Lo

resistance gh

e -to-us Ready mix d scree

ry system na

E LIN

HIG H

S CRY TAL

pid-hard c Ra

DI N

CT-C25-F5-A12

shr

inka

Polymer-modified, ready-to-use dry mix for production of rapid-set screeds screeds allowing early flooring installation. Grade CT-C25-F5 to DIN EN 13 813. Suitable for heated screeds, bonded screeds and unbonded screeds (on separating or insulation layer). Used as base for all types of floor covering, e. g. ceramic, natural stone, textile and elastic flooring. Particularly useful for fast-track or tightly scheduled screed laying. • Ready for tiling: after approx. 24 hours • Self-levelling • Coat thickness for bonded screeds: 20 – 70 mm • Coat thickness for unbonded screeds: 35 – 70 mm • Coat thickness for insulation: 35 1) – 70 mm • For indoor use • Working life: 60 – 90 minutes • Walkable: after approx. 3 hours • Ideal for renovation and refurbishment • Suitable for a various number of floor heating systems • Pumpable, efficient use also on larger projects • Heating system commissioning: after approx. 1 day • Adapted perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Screeds

Sopro FE 678

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: 19 – 20 kg/m² per cm screed thickness; 1,900 – 2,000 kg/m³ finished screed

NEW

Sopro FEW 698

Rapidur® self-levelling screed, white ted to es

E N 13 8

R BIN D

ent – te r em

e ag

ratio n fro m

bstrate

m oisture

SZ-T

w shrink Lo

resistance gh

e -to-us Ready mix d scree

ry system na

E LIN

HIG H

S CRY TAL

pid-hard c Ra

DI N

CT-C25-F5-A12

shr

inka

Coverage: 19 – 20 kg/m² per cm screed thickness; 1,900 – 2,000 kg/m³ finished screed As special construction described in IWM e.V. (German Association of Factory-Made Mortar Manufacturers) data sheet „Self-levelling cement screeds“, for vertical live loads ≤ 2 kN/m².

Order nr. Packaging 678-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Order nr. Packaging 698-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

See page 255 (Cementitious screed groups).

171

Screeds Rapid-set, special cement-bound, premixed dry mortar with special single-sized grading and rapid strength development for indoor and outdoor laying of tiles and natural stone units, particularly on balconies and patios. Extra reliability thanks to highly pervious, largely efflorescence-free mortar bed, which offers full protection against water-induced damage, e.g. microstructural failure through frost action. Drainage performance and efficient removal of infiltrating water is significantly enhanced through installation of Sopro DRM 653 drainage mat. Covering material is subsequently laid wet-on-wet using Sopro HSF 748 flexible bonding slurry with trass.

Sopro DMX 619 Drainage mortar eXtra

CT-C25-F4

Trass

EN 1

pid-hard c Ra

R BIN D

• Ready to receive floor covering: after approx. 24 hours • For floors, indoors and outdoors • Extra-rapid-set: high early strength – grade CT-C20-F4 after only 3 days • Extra-reliable: very high water permeability, largely efflorescence-free • Compressive strength after 28 days: approx. 25 N/mm² • Flexural tensile strength after 28 days: approx. 4 N/mm² • Very good workability • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

ry system na

i g i n al

ent – te r em

E LIN

HIG H

S CRY TAL

Screeds

DI N

enish Rh

ted to es

SZ-T

e ag

w shrink Lo

shr

ion rotect d p a r t eX ies an

inka

lcon for ba tios pa

Coverage: approx. 16 kg/m² per cm coat thickness

Order nr. Packaging 619-21

Drainage mortar

Trass

DI N

CT-C25-F4

enish Rh

E N 13 8

Building chemical products

Pallet weight

1,000 kg

• Ready to receive floor covering: after approx. 3 days • For floors, indoors and outdoors • Very high water permeability • Very good workability • Pumpable • For laying on mortar beds with min. 2 cm coat thickness • Low-chromate to Regulation 1907/2006 EC, Annex XVII

i g i n al

Coverage: approx. 16 kg/m² per cm coat thickness

172

Packages/pallet

Sopro DM 610

ted to es

Bag 25 kg

Order nr. Packaging 610-21

Bag 25 kg

See page 255 (Cementitious screed groups).

Packages/pallet

Pallet weight

1,000 kg

Sopro TRB 421

ted to 1) es

E N 13 8

CT-C20-F3 DI

DI N

CT-C35-F5

rüft na ep

Binder with trass

E N 13 8

enish Rh

Trass or

i g i n al

Special, trass-bearing, cementitious binder for preparation of thick-bed, fixing and single-sized aggregate mortars. Produces smooth, easily workable, highly resistant and dense mortars for indoor and outdoor use, particularly suitable for laying sensitive, discolorationprone natural stone coverings. For ceramic tiles and floor coverings, terracotta and cast stone units. High trass content significantly reduces risk of efflorescence, bloom and discoloration. To enhance drainage performance and facilitate removal of infiltrating water, installation of Sopro DRM 653 drainage mat is recommended. May be mixed on site with (0 – 4 mm graded) sand or (0 – 8 mm graded) screed sand. Drainage mortar may be produced by mixing with 2 – 5 mm, 5 – 8 mm or 8 –12 mm graded quality chippings or 4 – 8 mm graded rounded aggregate. Also suitable for preparation of cementitious thick-bed and fixing mortars, in conjunction with Sopro EEK 871 epoxy screed aggregate, and of drainage mortars in conjunction with Sopro DEK 872 pervious screed aggregate (see page 174). • For indoor and outdoor use • For mortar bed thicknesses upwards of 15 mm • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Binde

Mixing ratio 1 : 4 (25 kg TRB 421 : 100 kg EEK 871)

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Mixing ratio 1 : 4 (25 kg TRB 421 : 100 kg DEK 872)

Coverage: 3.5 – 4.0 kg/m² per cm coat thickness; 350 – 400 kg/m³

Sopro DRM 653 Drainage mat 8 mm

Excellent drainage capacity

Order nr. Packaging 421-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Drainage mat made from high-density (HD) polyethylene and special woven glass fabric. Installed in conjunction with Sopro drainage mortars, it serves to raise covering and thus provide rapid, reliable horizontal drainage to all sides on balconies, patios and steps/stairways. Sopro DRM 653 is loose laid on flexible sealing slurries, e.g. Sopro DSF 423, DSF 523, DSF 623, TDS 823 and ZR 618, or waterproof sheet membranes to DIN 18 195, e.g. SoproThene® 878 bitumen sheet membrane. Also suitable for incorporation below pervious synthetic resin mortars prepared from Sopro BH 869 construction resin and Sopro DEK 872 pervious screed aggregate (see page 174) or drainage mortars made from Sopro TRB 421 binder with trass and Sopro DEK 872. • Rapid and reliable drainage below Sopro drainage mortars • Below ceramic and natural stone coverings • Withstands high compressive loads • Low construction height: approx. 8 mm • Straightforward application • Ageing-resistant and dimensionally stable

Coverage: approx. 1.05 m²/m²

Order nr. Packaging 653-12

Roll (100 cm wide) 12,5 m

Packages/pallet

Pallet weight

approx. 60,5 kg

173

Screeds

Screeds Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds. For industrial and hall floors, workshops and spaces subject to high mechanical and chemical loads. Used to produce water-permeable single-sized aggregate mortars for laying of bridge kerbstones. For production of capillary breaking joints in swimming pools.

Sopro BH 869 Construction resin

Screeds

• For floors, indoors and outdoors • Working life (as construction resin): approx. 50 minutes • Walkable (as construction resin): after approx. 12 hours • GISCODE RE 1

Coverage: as primer: 250 – 350  g/m² as resin mortar: 170 – 210  g/m² per mm coat thickness depending on adopted grading curve approx. 70 g/m² and mm thickness as raisin mortar in conjunction with Sopro EEK 871

Order nr. Packaging

e ag

Epoxy screed aggregate w shrink Lo

E N 13 8

CT-C25-F7 N

shr

g inka

SR-C20-F6 w

shr

inka

Building chemical products

360 kg

869-12

Bucket 12 kg (combi pack)

360 kg

869-05

Bucket 5 kg (combi pack)

225 kg

869-01

Pot 1 kg (combi pack)

240

240 kg

Protect from frost during transportation and storage.

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

• Mixing ratio: 1 bag (25 kg) Sopro DEK 872: 1 can (1 kg) Sopro BH 869 • Ready to receive floor covering: after approx. 24 hours • High mechanical and temperature resistance • Grade SR-C20-F6 after 7 days 1) • Working life: 100 minutes • Walkable: after 12 hours • Water-free-curing • For indoor and outdoor use

Coverage: approx. 16 kg/m² per cm coat thickness

174

Used in conjunction with Sopro BH 869 construction resin, Sopro DEK 872 drainage screed aggregate, produces a drainage resin screed achieving grade SR-C20-F6 to DIN EN 13 813. For the construction of a thin layered drainage mortar for the consecutive laying of cermic tiles, concrete stones and agglomerate stones. For the construction of a waterpermeable and efflorescence-free mortar bed. Drainage performance and efficient removal of infiltrating water is significantly enhanced through installation of Sopro DRM 653 drainage mat. Ideal for use on refurbishment contracts with low panel thicknesses. Excellent working properties, combined with a long working life, ideal for outside use.

e ag

w shrink Lo

Bucket 8 kg component B

871-21

Drainage screed aggregate

E N 13 8

352 kg

869-08

Order nr. Packaging

Sopro DEK 872

• Ready to receive floor covering: after 24 hours • High mechanical and temperature resistance • Grade SR-C25-F7 after only 3 days 1) • Working life: 1 hour • Walkable: after 8 hours • Water-free-curing • For indoor and outdoor use

Coverage: approx. 17 kg/m² per cm coat thickness

ted to 1) es

Pallet weight

Bucket 16 kg component A

Used in conjunction with Sopro BH 869 construction resin, Sopro EEK 871 epoxy screed aggregate, produces a rapid-set synthetic resin screed achieving grade SR-C25-F7 to DIN EN 13813 to allow early flooring installation. High abrasion resistance, compressive, flexural tensile and pull-off strengths. For thin levelling coats applied as bonded, unbonded or floating layers. Ideal for use on refurbishment c ontracts.

Sopro EEK 871

ted to 1) es

Packages/pallet

869-16

Order nr. Packaging 872-21

Bag 25 kg

In conjunction with Sopro BH 869.

Packages/pallet

Pallet weight

1,000 kg

Screeds

w shrink Lo

ted to es

e ag

Epoxy mortar

E N 13 8

DI N

SR-C60-F15

shr

inka

High loadability

Solvent-free, pigmented, ready-mixed, rapid-set, two-component, epoxybased reaction resin mortar. Exceptionally high abrasion resistance, compressive, tensile bending and pull-off strength. Particularly suitable for production of thin bonded/unbonded filler coats and levelling coats to falls with large differences in thickness. Also suitable as repair mortar for quick repair of wall and floor surfaces. For capillary-breaking joints around pool perimeter and capillary-breaking fillings at junctions with floor drains/wall penetrations. • Ready to receive floor covering: after approx. 24 hours • SR-C60-F15 after only 3 days • For indoor and outdoor 3) use, for walls and floors • Working life: approx. 60 minutes • Walkable: after 12 – 24 hours • GISCODE RE 1

Screeds

Sopro EE 771

When applying outside areas please consult our technical service.

Coverage: approx. 1.7 kg/m² per mm coat thickness

Order nr. Packaging

SoproDur® HF-L

Two-component, flow-applied polyester resin for structural b onding of cracks in screeds and for production of reaction resin mortars for minor repairs.

Protective coat

Packages/pallet

Pallet weight

771-25

Bucket 25 kg

675 kg

771-10

Bucket 10 kg

420 kg

• For indoor and outdoor use • For floors • Extra-rapid-setting • Water- and weather-resistant • High mechanical strengths • Good bonding properties on concrete and steel stone grey RAL 7030

Order nr. Packaging

Packages/pallet

Pallet weight

513-04

Duo Pack 5 kg: Bucket, Component A 4 kg

240 kg

513-01

Bottle, Component B 1 kg

60 kg

Coverage: 300 – 400 g/m² per coat; two coats required

Sopro RH 646

Two-component flow applied polyester resin for structural bonding of cracks in screeds and for production of resin mortars for minor repairs.

Crack resin

• For floors, indoors and outdoors • Extra rapid-setting • Water- and weather-resistant • High mechanical strengths • Good bonding properties on concrete and steel Test report Available upon request

with 10 cross-dowels

Coverage: depending on substrate roughness and application method Protect from frost during transportation and storage.

Order nr. Packaging 646-06

Carton (6 pots 508 g)

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Packages/pallet

Pallet weight

100

305 kg

175

Screeds NEW

Sopro SH 649 Shaken resin

Screeds

with 10 cross-dowels

NEW

Coverage: depending on substrate roughness and application method

Order nr. Packaging

Cross-dowels

Stainless-steel cross-dowels for filling/structural bonding of screed cracks and joints.

649-01

Carton (3 combi packs à 600 ml)

Order nr. Packaging

176

Building chemical products

Protect from frost during transportation and storage.

097-01

Carton à 200 pieces

097-02

Carton (10 bags à 200 pieces)

Packages/pallet

Pallet weight

99 (33 cartons)

288 kg

Mortar and screed additives, accessories

Coverage: 1 × 1.25 kg PE bag for 25 kg bag of cement

Sopro EPZ 764 Screed plasticizer

Powder concentrate used to accelerate set of Portland cements and to produce rapid-set screeds allowing early flooring installation. • Ready to receive floor covering: after 3 – 5 days for tiling • For indoor and outdoor use • Working life: approx. 45 minutes • Walkable after 6 – 10 hours • Also suitable for heated screeds

Order nr. Packaging 647-10

Carton (8 bags à 1.25 kg)

Packages/pallet

Pallet weight

480 kg

Special, highly-concentrated, strongly plasticizing agent for production of site-mixed bonded, unbonded and industrial screeds. Also suitable for heated screeds. • Facilitates screeding, floating and smoothing • Improves the water retention • Improves the compressive and flexural tensile strength • For indoor and outdoor use

Coverage: 120 ml (1 tube) per 200 ltr mixing water

Sopro EVZ 634 Screed retarder

Order nr. Packaging 764-01

Tube 120 ml

Liquid mortar and screed admixture used to extend working life and retard initial set of cement mortars and screeds. Ideal for producing large areas and for bridging interruptions in operations on site. Also suitable for ready-mixed screeds with long journey to site, particularly during warm season. • Retardation time adjustable via dosage • Increases final strength of screed • For indoor and outdoor use

Coverage: 0.2 – 0.8 % (max. 1.2 %) of cement weight

Sopro MÖ 772 Mixing oil

Order nr. Packaging 634-99

Container 1,000 kg

634-25

Canister 25 kg

Packages/pallet

Pallet weight

available upon request 24

600 kg

Air-entraining admixture for production of site-mixed plastic, high- workability mortars, concretes and screeds. Increases frost resistance and reduces water permeability. • Reduces mixing water requirement • Lowers suction • Increases weather resistance

Order nr. Packaging

Coverage: 50 – 125 ml for 50 kg cement Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

772-44

Canister 10 ltr

636 kg

772-83

Canister 5 ltr

477 kg

177

Mortar and screed additives, accessories

Rapidur® EB 5 screed accelerator

Mortar and screed additives, accessories Sopro BSO 762 Biological mould oil

Solvent-free, biodegradable concrete release agent for absorbent, non-absorbent and smooth formwork types for production of fair-faced concrete and smooth or textured wall and floor slab units. • Ensures smooth, discoloration-free concrete surfaces • Ensures formwork remains clean • With rust-inhibiting and anti-rot additives for steel and timber formwork • Sprayable

Mortar and screed additives, accessories

Coverage: depending on type and condition of formwork and application method: 20 – 40 ml/m² (mean value)

Sopro MFS 761 Antifreezing admixture for mortar

Order nr. Packaging 762-99

Container 1,000 kg

762-44

Canister 10 ltr

Packages/pallet

Pallet weight

available upon request 60

528 kg

Chloride-free, liquid mortar admixture to lower freezing point of mixing water and accelerate hydration of mortars, plasters and renders. Enables use of site-mixed cementitious mortars at air temperatures down to -10 °C. All standardized cement types can be used. The antifreezing admixture is added to the mixing water in the stated proportion. • Chloride-free • Lowers freezing point of mixing water • Accelerates hydration process • Facilitates application through plasticizing effect • Improves compactability • Reduces mixing water requirement about 7 – 9 %

Coverage: 1 – 2 % of cement weight or 250 – 500 g per 25 kg bag of cement

Sopro DM 763 Waterproofing admixture

Order nr. Packaging 761-06

Canister 6 kg

Packages/pallet

Pallet weight

128

768 kg

Chloride-free, liquid admixture for production of site-mixed cement and lime/cement mortars, plasters and renders with enhanced w aterproofing performance and improved workability. Increases r esistance to waters aggressive to mortar. • Reduces mixing water requirement • Reduces vulnerability to efflorescence • Increases freeze/thaw resistance • Increases weather resistance • Water vapour diffusion unaffected • Reduces risk of mortar segregation

Packages/pallet

Pallet weight

Coverage: 0.5 – 1 % of cement or cement filler weight

Order nr. Packaging 763-44

Canister 10 kg

600 kg

763-83

Canister 5 kg

450 kg

763-81

Bottle 1 kg

480

480 kg

Sopro HE 449

Polymer dispersion used as bonding layer for mineral surface f illers and plasters/renders (e. g. Sopro FS 15® plus floor-levelling compound). For wet-on-wet application. For modification of mortars, screeds and slurries.

Bonding emulsion

• For indoor and outdoor use • Straightforward application • Good bonding performance

Order nr. Packaging

Coverage: 100 – 200 g/m² as bonding layer

178

Building chemical products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

449-44

Canister 10 kg

600 kg

449-43

Canister 5 kg

450 kg

449-81

Bottle 1 kg

384

384 kg

Mortar and screed additives, accessories Sopro ERS 961 Perimeter insulation strip for screeds Height 100 mm

Self-adhesive perimeter insulation strip made from rotproof, nonwovenbacked, closed-cell polyethylene foam. Straightforward, reliable application. For incorporation at wall/floor junctions to prevent mortar bridges. Suitable for all types of cement and calcium sulphate-based screed. Particularly recommended for use in conjunction with Sopro Rapidur® FE 678 self-levelling screed.

Size: 100 mm high, 8 mm thick, 40 mm bonded nonwoven

Order nr. Packaging 961-01

Sopro EDD 152 Screed expansion dowel

Carton (5 rolls à 20 m)

Packages/pallet

Pallet weight

approx. 45 kg

Special flexible, plastics-sheathed, stainless-steel-reinforced dowel. For retrofitting as dowel connector in screed bay and movement joints. Also suitable for use in fresh screeds to prevent steps (i. e. height displacement) between adjoining bays. • For indoor and outdoor use • Suitable for all types of mineral screed • No impairment of expansion and contraction behaviour of screeds

Order nr. Packaging 152-03

NEW

Level marker pin

Carton (10 pieces)

Self-adhesive level marker pins for precise setting out of thicker surface filler and scraed coats, up to a height of 10 cm. Ideal for marking measurement points.

Order nr. Packaging 008-01

Carton à 18 pieces

008-02

Carton (10 Bags à 18 pieces)

179

Mortar and screed additives, accessories

Mortars and screeds

Rapidur® B1 turbo

Rapidur® B3

Rapidur® B5

rapid-set screed binder

Type

Binder

Cement

Rapidur® M1

rapid-set screed mortar

Rapidur® M5

rapid-set screed mortar

Rapidur® M8

rapid-set screed mortar

Mortar and screed additives, accessories

Generals

Ternary system

Coat thikness CT-C50-F6 1)

Cement

0 – 4  mm

12 – 80  mm

12 – 100  mm

20 – 100  mm

CT-C50-F7

CT-C40-F6

CT-C25-F4

A12

Grading

DIN EN 13 813

Ready-mixed screed Ready-mixed screed Ready-mixed screed mortar mortar mortar

CT-C40-F6 1)

CT-C45-F7 2)

Abraison resistance Böhme test EC1PLUS R

EC1PLUS R

Indoor and outdoor use

Floor heating system

Mixing ratios

1 : 4 und 1 : 5

1 : 4

1 : 4 und 1 : 5

Ready for ceramic covering

6 – 12  hours 1)

24 – 48  hours

approx. 3 days 2)

approx. 4 hours

approx. 24 hours

48 – 72  hours

2 – 3  hours1)

3 – 4  hours

7 – 8  hours 2)

approx. 3 hours

approx. 12 hours

approx. 24 hours

30 – 45  minutes 1)

40 – 60  minutes

2 – 3  hours2)

20 – 30  minutes

3 – 4  hours

4 – 5  hours

1 days

2 days

3 days

1 day

3 days

5 days

Extra-low shrinkage

High crystalline water binding capacity

Resistance to moisture migration

Pumpable

EMICODE Use

Properties

Walkable Working life Heating system commissioning after

Thin-coat construction Pervious

180

Building chemical products

l Suitable

Mixing ratio: 1 : 4 (25 kg binder : 100 kg gravel sand 0 – 8  mm, according to DIN EN 12 620) Mixing ratio: 1 : 5 (25 kg binder : 125 kg gravel sand 0 – 8  mm, according to DIN EN 12 620)

1) 2)

Application matrix

self-levelling screed

Sopro EE 771 epoxy mortar

Sopro BH 869 and EEK 871

drainage mortar eXtra

Sopro DMX 619

Sopro DM 610 drainage mortar

construction resin and epoxy screed aggregate

Sopro TRB 421 and DEK 872

binder with trass and pervious screed aggregate

Ready-mixed screed mortar

Synthetic resin with aggregate

Ready-mixed screed mortar

Cement

Synthetic resin

Cement

Ready-mixed screed Binder with aggregate mortar Cement

0 – 4  mm

1 – 8  mm

Cement

Sopro BH 869 and DEK 872

construction resin and pervious screed aggregate

Synthetic resin with aggregate Synthetic resin

20 – 70  mm

4 – 20  mm

from 15 mm

20 – 100  mm

20 – 80  mm

CT-C25-F5

SR-C60-F15

SR-C25-F7 3)

CT-C25-F4

CT-C20-F3 4)

SR-C20-F6 3)

nur innen

1 : 4

1 : 25

A12 EC1PLUS R

1 : 25 approx. 24 hours

approx. 24 hours

approx. 24 hours 3)

approx. 24 hours

approx. 3 days

approx. 12 hours 3)

approx. 3 hours

12 – 24  hours

approx. 8 hours3)

approx. 8 hours

approx. 24 hours

approx. 8 hours4)

approx. 8 hours 3)

approx. 3 hours

approx. 60 minutes

approx. 1 hour 3)

45 – 60  minutes

1 – 2  hours

approx. 65 minutes 4)

approx. 1 hour 3)

1 day l l

l l

l Suitable

Mixing ratio: 1 : 25 (1 kg Sopro BH 869 : 25 kg Sopro EEK 871 resp. Sopro DEK 872) Mixing ratio: 1 : 4 (25 kg Sopro TRB 421 : 100 kg Sopro DEK 872)

3) 4)

181

Mortar and screed additives, accessories

Rapidur® FE 678

Underground construction, gully-repair and shrinkage compounded grouts Sopro KM 743

System product for m anhole repair

S CRY TAL

E LIN

HIG H

Rapid-set trowelling mortar

R BIN D

High loadability

Sag-resistant, shrinkage-compensated, rapid-set, cementitious repair and anchoring mortar for fast assembly in building and civil engineering. Extra-rapid strength development and high early strength. For use as trowelling and manhole/sewer mortar for installing and raising manhole rings, for laying sewer bricks (engineering bricks), for filling/plugging joints and for rapid production of strong, heavy-duty mortar joints for concrete construction and repair works. For fast reprofiling of columns, beams and balcony parapets. • For indoor and outdoor use • Extra-rapid strength development • High mechanical compressive and flexural tensile strengths • Resistant to sulphates • Shrinkage-compensated • Start of set: after approx. 15 minutes • End of set: after approx. 20 minutes • Walkable: after approx. 2 hours • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Coverage: approx. 1.8 kg per mm coat thickness

Order nr. Packaging

Sopro KA 655

Ready-to-use, cold-applied, solvent-free, one-component reactive asphalt. For fast and durable reinstatement of damaged areas such as potholes and frost spalling. For repair of vehicular pavements, manhole covers/road gullies, concrete and asphalt footpaths, car parks and industrial flooring. Resistant to high loads, even at high temperatures. Resistant to rain and frost.

Cold-applied asphalt

System product for m anhole repair

High loadability

Coverage: approx. 25 kg/m² per mm coat thickness

743-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

• Ready to accommodate high loads after only 30 minutes • Allows early loading • High strengths • For 1 – 5 cm coat thicknesses in single coat • Traffickable by vehicles: immediately after mechanical compaction • GISCODE BBP10

Order nr. Packaging 655-25

Bucket 25 kg (vacuum sealed)

Packages/pallet

Pallet weight

600 kg

Easy application of Sopro KA 655

1 Cleaning of the damaged spot

2 Applying Sopro KA 655

3 Spreading

4 Moistening

5 Compressing

6 Directly trafficable by high loads

182

Building chemical products

Protect from frost during transportation and storage.

Underground construction, gully-repair and shrinkage compounded grouts Sopro VM S 744 Rapid-set grout

R BIN D

pid-hard c Ra

ent – te r em

ry system na

System product for m anhole repair

E LIN

HIG H

S CRY TAL

SZ-T

High-fluidity, shrinkage-compensated, rapid-set, cementitious grout with rapid strength development and high early strength. For grouting heights up to 15 cm. For grouting manhole frames and adjustment rings, for fixing signs, masts, posts and the like. For use in concrete construction and repair works, for industrial flooring and vehicular pavements that need to be reopened to traffic within a short period. • For indoor and outdoor use • Extra-rapid strength development • 0 – 2.5 mm grading • Grouting height: up to 15 cm; for thicknesses upwards of 5 cm, may be extended with 2 – 8 mm gravel; for small applications (e. g. for grouting manhole frames) up to 20 cm product can be applied unextendedly • Shrinkage-compensated • Start of set: after approx. 15 minutes • End of set: after approx. 30 minutes • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Coverage: approx. 2.1 kg per mm coat thickness

Order nr. Packaging

Sopro VM 4 856

Shrinkage-compensated, cementitious grout, remaining fluid for long period, with high strength properties. For grouting with coat thicknesses up to 4 cm. For repair of reinforced-concrete beams, columns and piers, box girders and prestressed bridge girders, concrete slabs and surfaces (e. g. industrial flooring). For sealing rigid construction joints in concrete elements.

Grout

S CRY TAL

E LIN

HIG H

1 – 4 cm

R BIN D

744-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

• For indoor and outdoor use • 0 – 2.5 mm grading • Grouting height: up to 4 cm • Shrinkage-compensated • Start of set: after approx. 5 hours • End of set: after approx. 5.5 hours • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

High loadability

Coverage: approx. 2.1 kg powder/m² per mm coat thickness

Sopro VM 12 745 Grout 2 – 12 cm

High loadability

Order nr. Packaging 856-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Shrinkage-compensated, cementitious grout, remaining fluid for exceptionally long period, with high strength properties. For variable grouting heights of 2 – 12 cm. For void-free grouting of steel structures, anchors, columns, machine bases, levelling wedges, tracks, sleeve foundations, high-bay rack uprights, precast-concrete unit connections and rigid masonry joints. • For indoor and outdoor use • 0 – 5 mm grading • Grouting height: 2 – 12 cm • Shrinkage-compensated • Start of set: after approx. 11 hours • End of set: after approx. 12 hours • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificates Available upon request

Coverage: approx. 2.1 kg

Order nr. Packaging 745-25

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

183

Bedding and multipurpose mortars

High loadability

Surface fillers/renders NEW

Sopro FS 15 550

Floor-levelling compound

ted to es

CT-C35-F9 N

E N 13 8

pid-hard c Ra

3°

u rel. h

ess

ry system na

hrs. ready to receive ceramic covering

ckn

ent – te r em

After

% re l . h u

it y

2–3

it y

+23

R BIN D

≥ 2 mm t

ha or c ir re st

tant sis

E LIN

HIG H

S CRY TAL

self-levelling

SZ-T

Up to 150 mm in bonded construction.

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 550-21

Floor-levelling compound

ted to es

E N 13 8

After

it y

2–3

hrs. ready to receive ceramic covering

3°

ess

% re l . h u

1,000 kg

it y

ckn

ry system na

SZ-T

+23

HIG H

≥ 2 mm t

R BIN D

ent – te r em

pid-hard c Ra

ha or c ir re st

tant sis

E LIN

Pallet weight

CT-C30-F7

S CRY TAL

Packages/pallet

Sopro FS 5 549

Bag 25 kg

u rel. h

Coverage: approx. 1.6 kg/m² per mm coat thickness

184

Building chemical products

Order nr. Packaging 549-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders NEW

Sopro VS 582 Self-levelling filler

ls al

e ag

lls fa

rates

HIG H

inka

suitab l lso

R BIN D

shr

E LIN

m ber sub

pid-hard c Ra

ent – te r em

ry system na

Lower strengths are achieved for application as self-levelling filler due to higher mixing water requirement.

o in g t

S CRY TAL

External application only in conjunction with suitable waterproof membrane or, as directly usable floor surface, finished with SoproDur® HF-L 513 high-strength epoxy protective coat.

le uitab Also s flooring ber for tim

E N 13 8

w shrink Lo

ooth fille m

yin g to f

rl ay

CT-C35-F7

formulation

ted to 2) es

f-levellin el

SZ-T

self-levelling

Coverage: approx. 1.7 kg/m² per mm coat thickness

Order nr. Packaging 582-21

Heavy-duty floor-levelling compound

ted to es

High loadability

ry system na

ent – te r em

SZ-T

Coverage: approx. 1.7 kg/m² per mm coat thickness

E LIN

HIG H

S CRY TAL

CT-C45-F11-A12 E N 13 8

Packages/pallet

Pallet weight

1,000 kg

Sopro HF-S 563

Bag 25 kg

R BIN D

Order nr. Packaging 563-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

185

Surface fillers/ renders

pid-hard c Ra

Up to 70 mm in bonded construction.

Surface fillers/renders

Sopro AFS 561

Anhydrite floor-levelling compound ted to es

CA-C25-F7 N

E N 13 8

self-levelling

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Surface fillers/ renders

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging 561-21

suitab l lso

Fibre-reinforced self-levelling filler

R BIN D

rates

ent – te r em

pid-hard c Ra

HIG H

E LIN

m ber sub

ry system na

S CRY TAL

E N 13 8

CT-C30-F7 N

Packages/pallet

Pallet weight

1,000 kg

Sopro FAS 551

ted to es

Bag 25 kg

SZ-T

Coverage: approx. 1.6 kg/m² per mm coat thickness

186

Building chemical products

Order nr. Packaging 551-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders

Self-levelling, pumpable, rapid-set, cementitious surface filler to produce smooth, level, unbroken surfaces for subsequent laying of all kinds of flooring. Suitable for floor heating systems.

Sopro OFS 543

E N 13 8

R BIN D

pid-hard c Ra

ry system na

ent – te r em

Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

SZ-T

Coverage: approx. 1.6 kg/m² per mm coat thickness

pid-hard c Ra

543-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

R BIN D

ry system na

ent – te r em

E N 13 8

HIG H

CT-C20-F5

S CRY TAL

E LIN

Floor-levelling compound

ted to es

Order nr. Packaging

Pumpable, flow-applied, self-levelling, rapid-set, cementitious surface filler for production of smooth, unbroken surfaces prior to floor ing installation. Suitable for floor heating systems.

Sopro NSC 587

• Coat thickness: 3 – 25 mm • For floors, indoors • Rapid-set • Compressive strength after 28 days: approx. 25 N/mm² • Flexural tensile strenght after 28 days: approx. 6 N/mm² • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Adapted perimeter insulation stripe • Low-chromate to Regulation 1907/2006 EC, Annex XVII

SZ-T

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 587-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

187

Surface fillers/ renders

DI N

HIG H

CT-C25-F6

S CRY TAL

E LIN

Contract floor-levelling compound ted to es

self-levelling

Surface fillers/renders Sopro DFS

R BIN D

ry system na

ent – te r em

pid-hard c Ra

E N 13 8

DI N

CT-C40-F10-A12

S CRY TAL

HIG H

ted to es

E LIN

ambiento® self-levelling designer floor topping

SZ-T

High loadability

self-levelling

Decorative, heavy-duty, self-levelling, rapid-set, one- component, cementitious designer floor topping for production of finished floor surfaces in commercial, retail and private facilities. Suitable for use in shops, boutiques, salesrooms, car showrooms, salons, offices, medical practices, lofts, restaurants, discotheques, living rooms, garages, storerooms, cellar spaces etc. Only suitable for professional floor coating by trade appli cators! • Coat thickness: 5 – 15 mm • For indoor floors • Produces finished floor surface • Quick-drying • Unique, customized floor finishes • Compressive strength after 28 days: approx. 40 N/mm² • Flexural tensile strength after 28 days: approx. 10 N/mm² • Abrasion resistance class (Böhme test): A 12 • Working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Loadable as finished floor surface: after approx. 24 hours per cm coat thickness • Suitable for floor heating systems • Suitable Sopro perimeter insulation strip on page 56 • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Surface fillers/ renders

Coverage: approx. 1.7 kg/m² per mm coat thickness

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

963-21

white

Bag 25 kg

1,000 kg

964-21

silver

Bag 25 kg

1,000 kg

965-21

flanell grey

Bag 25 kg

1,000 kg

Sopro ambiento® floor colours silver

white

Sopro RDS 960 Perimeter insulation strip Height 50 mm

flannel grey

Self-adhesive perimeter insulation strip made from rotproof, nonwoven-backed polyethylene foam. Straightforward, reliable application. For incorporation at wall/floor junctions to prevent mortar bridges when applying Sopro tile adhesives or Sopro flow-applied floor-levelling compounds. For use as perimeter insulation strip when installing Sopro FDP 558 tile insulation board, Sopro TEB 664 impact sound insulation and separating layer, and Sopro TDP 565 impact sound insulation board. • Straightforward, reliable application • Eliminates sound transmission paths and restraint stresses at perimeter wall/floor joints • Straightforward, reliable corner detailing • Excellent adhesion to clean substrates • For indoor and outdoor use Size: 50 mm high, 5 mm thick, 40 mm bonded nonwoven

Order nr. Packaging 960-01

188

Building chemical products

Carton (5 rolls à 20 m)

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Packages/pallet

Pallet weight

approx. 35 kg

Surface fillers/renders NEW

Sopro RAM 3 454

R BIN D

ooth fille m

rl ay

60 m Up to

lls

hours!

S CRY TAL

Ready for ceramic tiling after only

E LIN

HIG H

Renovation and levelling mortar

o in g t

stable

For single, full-surface application.

Coverage: approx. 1.5 kg/m² per mm coat thickness; as angle fillet/junction seal 0.4 – 0.5 kg/lfm

Sopro AMT 468 Levelling mortar with trass

enish Rh

Trass or

i g i n al

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging

Packages/pallet

Pallet weight

454-21

Bag 25 kg

1,000 kg

454-05

Bag 5 kg

200

1,000 kg

Order nr. Packaging 468-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,050 kg

189

Surface fillers/ renders

Surface fillers/renders Sopro SP 466 Lightweight levelling mortar

enish Rh

Trass or

i g i n al

Coverage: approx. 1.2 kg/m² per mm coat thickness

Sopro RS 462 Repair filler

stable

Grey, sag-resistant, rapid-set, cementitious, polymer-modified u niversal surface filler incorporating lightweight aggregate. Used as rapid-set filler for patching and smoothing concrete, masonry and plastered/rendered wall surfaces. Also suitable as surface g radient filler to provide falls and on heated floor areas. Ideal for rapid progress on refurbishment/renovation schemes. P articularly straightforward application. • Coat thickness: 2 – 30 mm • Flexible • For walls and floors, indoors and outdoors • Trass-bearing • Working life: approx. 30 minutes • Walkable: after approx. 2 hours • Ready to receive floor covering: after approx. 2 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Order nr. Packaging 466-21

Bag 25 kg

Packages/pallet

Pallet weight

1,050 kg

Grey, sag-resistant, rapid-set, cementitious surface filler for smoothing, patching, levelling and repairing concrete, plasterwork, masonry and screed surfaces. • Coat thickness: 1 – 10 mm, may be extended for larger coat thicknesses using (0 – 2 mm or 0 – 4 mm graded) sand and cement in proportions 1 : 1 : 1 • For walls, floors and ceilings, indoors and outdoors • Working life: approx. 30 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Surface fillers/ renders

Test certificates Available upon request

Coverage: approx. 1.2 kg/m² per mm coat thickness

Order nr. Packaging

Sopro BS 467

Fine-aggregate, grey, rapid-set, sag-resistant, cementitious filler for smoothing, patching and coating fair-faced concrete, precast concrete and cement render wall and ceiling surfaces and for s topping fine cracks and pores in concrete surfaces.

Concrete filler

Packages/pallet

Pallet weight

462-21

Bag 25 kg

1,000 kg

462-05

Bag 5 kg

200

1,000 kg

• Coat thickness: 1 – 5 mm • For walls, floors and ceilings, indoors and outdoors • Working life: 20 – 30 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: approx. 1.3 kg/m² per mm coat thickness

190

Building chemical products

Order nr. Packaging 467-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Soprodur® Microcement void filler

stable

Order nr. Packaging

Coverage: depends on application

Sopro SM 976 Chase mortar

Packages/pallet

Pallet weight

900-30

Carton (6 bags à 5 kg)

450 kg

900-48

Bucket (12 bags à 0.5 kg; incl. measuring beaker)

312 kg

Lightweight thermal and sound insulating mortar for filling wall chases and service shafts. May be used as a cementitious levelling layer, e.g. for filling spaces around pipes on structural concrete slabs below floating screed constructions. May be applied by hand or plastering machine. • For indoor use • High coverage: low consumption rate • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request

Coverage: 1 bag fills 75 ltr void

Order nr. Packaging 976-13

Bag (approx. 13.5 kg) 75 ltr

Packages/pallet

Pallet weight

324 kg

191

Surface fillers/ renders

Please observe requirements relating to tools and equipment to be used for mixing and application (see page 107 – 108).

Surface fillers/renders

Sopro RAP 2 434

S CRY TAL

E LIN

HIG H

Renovation and levelling render

R BIN D

Surface fillers/ renders

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging 434-21

Sopro SBP 474

o ol con

lls

rl ay

S CRY TAL

R BIN D

E LIN

HIG H

tio

n«

Com pl i

ooth fille m

t hee as

»Swi

without hydrated lime

Swimming pool render ZD with B dat es PCC-mortar

stable

o in g t

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Coverage: approx. 1.5 kg/m² per mm coat thickness

192

Building chemical products

Order nr. Packaging 474-21

Bag 25 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

1,000 kg

Surface fillers/renders Sopro USW 941 White universal filler

stable

White, sag-resistant, rapid-set, cementitious filler for universal a pplication to fill, patch, smooth, mould and model indoor and outdoor surfaces. Ideal for renovation and refurbishment contracts.

Coverage: approx. 1.2 kg/m² per mm coat thickness

Sopro EG 828 Electricians’ gypsum

Order nr. Packaging 941-05

Bag 5 kg

Packages/pallet

Pallet weight

200

1,000 kg

Rapid-set gypsum for mounting/securing electrical installations, smoothing and making good and as plug for fixings. For indoor use. Ideal for installation of electrical wiring and flush socket outlets. Also suitable for moulding and modelling. Sets in 10 minutes. • For indoor use • Natural gypsum to DIN 1168 • Fibre- and cement-free • Rapid-setting • Must not be mixed with cement!

Order nr. Packaging

Coverage: depends on application

Packages/pallet

Pallet weight

828-10

Bucket 10 kg (2 bags à 5 kg)

330 kg

828-05

Bag 5 kg

200

1,000 kg

193

Surface fillers/ renders

• Coat thickness: 1 – 10 mm • For walls, floors and ceilings, indoors and outdoors • Working life: approx. 30 – 45 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Surface fillers/renders Sopro G 620

y le v el Q 1 4

lit

–Q

White smoothing compound

96 3

e Ty p

c. to DIN E N

stable

Coverage: approx. 0.9 kg powder/m² per mm coat thickness

Order nr. Packaging

Sopro F 820

y le v el Q 1 4

lit

–Q

White filler compound

c. to DIN E N

Surface fillers/ renders

96 3

e Ty p

Coverage: approx. 1.0 kg powder/m² per mm coat thickness

Packages/pallet

Pallet weight

620-20

Bag 20 kg

800 kg

620-04

Bag 5 kg

144

720 kg

Order nr. Packaging

Packages/pallet

Pallet weight

820-20

Bag 20 kg

800 kg

820-04

Bag 5 kg

144

720 kg

Quality levels achievable with Sopro gypsum filler compounds 1) Q 1

For surfaces not subject to visual requirements Basic surface filling, e.g. filling of butt joints between gypsum boards and overcoating of visible parts of fixings.

Q 2

Q 3

Q 4

194

Building chemical products

Rapid-set mortars Racofix® 2000 Rapid-set anchoring mortar

Extra-rapid-set, cementitious anchoring mortar. High tensile bending and compressive strength achieved after only short time. For balcony and stair balustrades. For fixing mortar anchors. • For indoor and outdoor use • Waterproof • Corrosion-inhibiting • High-strength • Working life: approx. 2 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Order nr. Packaging

Packages/pallet

Pallet weight

740-45

Bucket 15 kg

495 kg

Coverage: depends on application

740-43

Bucket 5 kg

360 kg

740-81

Bucket 1 kg

480

480 kg

Racofix® 8700

Rapid-set, cementitious anchoring mortar. For fast installation of sanitary appliances, hooks, anchors etc. For rapid laying of kerbs.

Rapid-set anchoring mortar

• For indoor and outdoor use • Waterproof • Corrosion-inhibiting • High-strength • Working life: 3 – 5 minutes • Non-combustible material to DIN 4102 • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Packaging

Coverage: depends on application

Packages/pallet

Pallet weight

741-45

Bucket 15 kg

495 kg

741-43

Bucket 5 kg

360 kg

741-05

Bag 5 kg

200

1,000 kg

741-81

Bucket 1 kg

480

480 kg

195

Surface fillers/ renders

Test certificate available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Surface/Universal adhesive fillers Rapidur® 460 Rapid-set anchoring mortar

Rapid-set, cementitious anchoring mortar. For fast fitting of door frames and installation of heating pipes. For anchoring of all sizes of masonry and foundation bolt. • For indoor and outdoor use • Working life: 4 – 6 minutes • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Packaging

Packages/pallet

Pallet weight

460-21

Bag 25 kg

1,000 kg

460-45

Bucket 15 kg

495 kg

Coverage: depends on application

460-43

Bucket 5 kg

360 kg

460-05

Bag 5 kg

200

1,000 kg

Sopro FM 436

Chamotte mortar made from natural raw materials. Sets ceramically. Used for masonry (infill) to fireplaces and heating gas flues in tiled stoves, fire stoves, heating units, kitchen stoves, ovens, barbecues and for repairing defects in fireclay linings to a depth of 5 mm.

Fireplace mortar

Surface fillers/ renders

• For indoor and covered outdoor areas • Fireproof up to 1.300 °C

Packages/pallet

Pallet weight

Coverage: depending on application

Order nr. Packaging 436-21

Bag 25 kg

1,000 kg

436-05

Bucket 5 kg

360 kg

Racofix® RMK 818

One-component, silane terminated polymer-based universal adhesive for bonding wide range of materials, e. g. tiles, natural stone, wood, glass, metal and plastics, and for fixing insulation materials, skirtings and metal track. Also suitable for waterproof bonding/sealing of joints in Sopro AEB 640/ AEB plus 639 waterproofing and separating membranes and for fixing Sopro AEB 641 sealing tape, Sopro AEB 642/643 sealing tape for internal/ external angles and Sopro AEB 645 floor collars.

Universal adhesive

• Water-resistant • For bonding wide range of materials • Practically odourless • For indoor and outdoor use • Colour: white

Coverage: approx. 1.4 kg/m² per mm coat thickness

196

Building chemical products

Order nr. Packaging 818-71

Cartridge 431 g

Packages/pallet

Pallet weight

1,080

465 kg

Concrete repair Repadur KS PCC corrosion-inhibiting mortar

Cementitious corrosion-inhibiting mortar for use in concrete r epair in accordance with ZTV-ING regulations and DafStb repair guidelines. Used to coat reinforcing bars to restore corrosion protection. • One-component • Mineral-based • Straightforward application • For brush application • For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request

Coverage: approx. 120 g/m for 10 mm dia rebars

Order nr. Packaging

Repadur MH

Cementitious mortar bonding layer for subsequent concrete r eplacement with Sopro Repadur 50. For use in concrete repair in accordance with ZTV-ING regulations and DafStb repair guidelines. Provides optimum contact adhesion for subsequently applied Sopro Repadur 50 reprofiling mortar.

PCC mortar bonding layer

Packages/pallet

Pallet weight

850-05

Bucket 5 kg

360 kg

850-01

Can 1 kg

480

480 kg

• One-component • Mortar bonding layer • Facilitates application of bonded layers on concrete substrates • Facilitates application and improves adhesion of reprofiling mortars • For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: approx. 1.65 kg/m² per mm coat thickness

Order nr. Packaging

Repadur 50

Cementitious, fibre-reinforced concrete substitute for reprofiling and large-area coating of concrete substrates in accordance with ZTV-ING regulations and DafStb repair guidelines. High-grade, sag-resistant reprofiling mortar. Spatula applied to fresh Sopro R epadur MH mortar bonding layer. Allows easy smoothing.

PCC concrete repair mortar

Packages/pallet

Pallet weight

851-21

Bag 25 kg

1,000 kg

851-05

Bag 5 kg

200

1,000 kg

• One-component • Coat thickness 10 – 50 mm • Mineral-based • Fibre-reinforced • For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request

Coverage: approx. 2.0 kg/m² per mm coat thickness

Order nr. Packaging

Packages/pallet

Pallet weight

852-21

Bag 25 kg

1,000 kg

852-05

Bag 5 kg

200

1,000 kg

197

Concrete repair

Test certificate Available upon request

Concrete repair Repadur 5 Fine PCC concrete filler

Fine cementitious filler for sealing pores and levelling concrete substrates. For use in concrete repair in accordance with ZTV-ING regulations and DafStb repair guidelines. For levelling previously applied coats of Sopro Repadur 50 concrete repair mortar. Produces smooth base to receive surface protection system. • One-component • Coat thickness 1 – 5 mm • For sealing of pores and blowholes • Substrate preparation for paint systems and other coatings • Fine filler for concrete repair/reprofiling • For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request

Coverage: approx. 1.75 kg/m² per mm coat thickness

Order nr. Packaging

Repadur 40 S

Cementitious, sag-resistant, shrinkage-compensated, rapid-set mortar for concrete repairs in thicknesses of 1 – 40 mm per coat. Particularly suitable for fast repair of precast concrete units and industrial concrete floors.

Concrete repair

Rapid-set concrete repair mortar

Coverage: approx. 1.85 kg/m² per mm coat thickness

198

Building chemical products

Packages/pallet

Pallet weight

853-21

Bag 25 kg

1,000 kg

853-05

Bag 5 kg

200

1,000 kg

• One-component • Coat thickness 1 – 40 mm • For concrete structures and balconies • For precast concrete units • For industrial floors and concrete highways/pavements • For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Order nr. Packaging

Packages/pallet

Pallet weight

855-21

Bag 25 kg

1,000 kg

855-05

Bag 5 kg

200

1,000 kg

Concrete repair Repadur 10 S Fine rapid-set concrete filler

Fine, cementitious, rapid-set, light-grey pigmented filler for thin-coat repairs and for filling horizontal and vertical concrete surfaces, cement and lime/cement render. Excellent workability. Quickly produces smooth surface for subsequent coatings. • One-component • Coat thickness 1 – 10 mm • Fine grading • Thin-coat filler • For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: approx. 1.6 kg/m² per mm coat thickness

Order nr. Packaging

Packages/pallet

Pallet weight

854-21

Bag 25 kg

1,000 kg

854-05

Bag 5 kg

200

1,000 kg

Concrete repair using Sopro Repadur system: 1 Substrate preparation 2 Corrosion protection: Repadur KS Concrete repair

3 Bonding layer: Repadur MH 4 Repair mortar: Repadur 50/40 S 1) 5 Concrete filler: Repadur 5/10 S

3 Application of bonding layer

1 Preparation of substrate

2 Application of anti-corrosion agent

4 Placing of repair mortar

5 Final surface finishing

When using Sopro Repadur 40S, apply a mixture of Sopro HE 449 bonding emulsion, water and Sopro Repadur 40S as contact slurry.

199

Primers, bonding agents and cement paints Sopro GD 749 Primer

Quick drying approx.

min

ETA

DANMARK

Order nr. Packaging

Packages/pallet

Pallet weight

749-99

Container 1,000 kg

–

749-91

Barrel 200 kg

–

749-85

Canister 25 kg

600 kg

749-44

Canister 10 kg 2)

600 kg

749-83

Canister 5 kg 2)

450 kg

Coverage: 100 – 200 g/m² undiluted

749-81

Bottle 1 kg

384

384 kg

Sopro SG 602

On gypsum and calcium sulphate- based substrates after approx. 12 hours.

NEW

Primer sealer

also available as empty truss

Please observe technical product information.

Order nr. Packaging

Coverage: 50 – 150 g/m² depending on nature of substrate

200

Building chemical products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

602-20

Canister 20 kg

600 kg

602-10

Canister 10 kg

600 kg

602-05

Canister 5 kg

450 kg

See also application matrix for tile adhesives on page 75.

Primers, bonding agents and cement paints Sopro HPS 673 Bonding primer

for indoor and outdoor use

Licence – Very low emission according to GEV-Emicode EC1PLUS

Order nr. Packaging

Packages/pallet

Pallet weight

673-10

Bucket 10 kg

640 kg

Coverage: approx. 150 g/m² depending on nature of substrate

673-05

Bucket 5 kg

400 kg

673-03

Bucket 3 kg

147

441 kg

673-01

Pot 1 kg

270

270 kg

Sopro MGR 637

Multi-purpose primer

Coverage: approx. 175 g/m² Protect from frost during transportation and storage.

Order nr. Packaging 637-10

Canister 10 kg

See also application matrix for tile adhesives on page 75.

Primers, bonding agents and cement paints

Licence – Very low emission according to GEV-Emicode EC1PLUS R

Packages/pallet

Pallet weight

450 kg

201

Primers, bonding agents and cement paints Sopro EPG 522 Epoxy primer

Solvent-free, unpigmented, two-component liquid epoxy resin. Applied as primer to stabilize friable mineral substrates and as a dhesion promoter on smooth substrates, e.g. metal, mastic asphalt and existing coatings. Applied as primer prior to laying large format tiles on gypsum-bound substrates. Used to provide seal and prevent action in cementitious substrates, to fill cracks, to grout joints around channels and floor drains/gullies and in capillary-breaking joints. Resistant to water, sea water, wastewater/sewage, alkaline solutions, diluted acids, salt solutions, mineral oils, fuels and lubricants. Used to seal capillaries in damp cementitious substrates to speed up laying of parquet, PVC etc. Please consult resistance table! • For walls and floors, indoors and outdoors • Working life: approx. 30 minutes • Ready to receive floor covering: after approx. 24 hours • Approved as system component and individual product for shipbuilding applications (see pages 260 – 262). Test certificate Available upon request BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro QS 507, Sopro PU-FD 570/571, Sopro QS 511, Sopro‘s No.1 (order no. 400) and Sopro TFb: MED approval no. 118.316 (wall) and 124.115 (floor), USCG approval no. 164.112/EC0736/118.316 (wall) and 164.117/ EC0736/124.115 (floor)

Order nr. Packaging

Coverage: 300 – 500 g/m² depending on nature of substrate

Sopro ESG 868

Primers, bonding agents and cement paints

Epoxy primer sealer

Packages/pallet

Pallet weight

280 kg

522-44 522-45

Bucket 10 kg (combipackage) Bucket 7.5 kg component Bucket 2.5 kg component Bucket 4 kg (combipackage) Bucket 3.0 kg component Bucket 1.0 kg component

168 kg

522-83 522-84

Order nr. Packaging

Coverage: 2 coats 0.6 – 0.9 kg/m² each = 1.2 – 1.8 kg/m²

202

Building chemical products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

868-41 868-42

Bucket 18 kg (combipackage) Bucket 15.8 kg component Bucket 2.2 kg component

432 kg

Bucket 9 kg (combipackage) Bucket 7.9 kg component Bucket 1.1 kg component

432 kg

868-31 868-32

See also application matrix for tile adhesives on page 75.

Please consult our technical service.

Primers, bonding agents and cement paints Sopro BH 869 Construction resin

Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds. For industrial and hall floors, workshops and spaces subject to high mechanical and chemical loads. Used to produce water-permeable single-sized aggregate mortars for laying of bridge kerbstones. For production of capillary breaking joints in swimming pools. • Floors, indoors and outdoors • Working life: approx. 50 minutes • Walkable: after approx. 12 hours • GISCODE RE 1

Coverage: as primer: 250 – 350  g/m² as resin mortar: 170 – 210  g/m² and mm thickness as raisin mortar in conjunction with Sopro EEK 871

Order nr. Packaging

Sopro HE 449

Bonding emulsion

Packages/pallet

Pallet weight

869-16

Bucket 16 kg component A

352 kg

869-08

Bucket 8 kg component B

360 kg

869-12

Bucket 12 kg (combi pack)

360 kg

869-05

Bucket 5 kg (combi pack)

225 kg

869-01

Pot 1 kg (combi pack)

240

240 kg

Primers, bonding agents and cement paints

• For indoor and outdoor use • Straightforward application • Good bonding performance

Order nr. Packaging

Coverage: 100 – 200 g/m² as bonding layer Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

449-44

Canister 10 kg

600 kg

449-43

Canister 5 kg

450 kg

449-81

Bottle 1 kg

384

384 kg

See also application matrix for tile adhesives on page 75.

203

Primers, bonding agents and cement paints Sopro HS 448 Bonding slurry with trass

enish Rh

Trass or

i g i n al

Coverage: approx. 1.4 kg/m²

Order nr. Packaging

Sopro HSF 748

Flexible bonding slurry with trass enish Rh

Trass or

i g i n al

448-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

• For floors, indoors and outdoors • Strong adhesion/bonding for installed coverings • Particularly suitable for use in conjunction with floor heating • Low-chromate to Regulation 1907/2006 EC, Annex XVII Coverage: 1.0 – 1.5 kg/m² for powder application; 1.5 – 2.0 kg/m² for slurry application

Sopro RS 648 Primers, bonding agents and cement paints

Vibration slurry

enish Rh

Trass or

i g i n al

Order nr. Packaging 748-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

One-component, trass-bearing, highly polymer-modified b onding and contact slurry. Applied as flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. Ideal for powder application technique. Sopro RS 648 is particularly suitable for laying tiles with low water absorption (fully vitrified stoneware). For laying large-format units (30 × 60 cm) using vibrated floor system. Also used as slurry-applied bonding layer on substrate and on bedding adhesive. As bonding layer for separate (bonded) screeds. As bonding layer in conjunction with Sopro DM 610 drainage mortar, Sopro DMX 619 drainage mortar eXtra or other porous screed types with single-size grading. As bonding layer for Sopro TVM 858 thick-bed mortar with trass. • For floors, indoors and outdoors • Specially designed and ideally suited for vibrated floor systems • Strong adhesion/bonding for installed coverings • For large-format units (30 × 60 cm) laid using vibrated floor system • Particularly suitable for use in conjunction with floor heating • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Coverage: 0.8 – 0.9 kg/m² per mm coat thickness for slurry application

204

Building chemical products

Order nr. Packaging 648-20

Bag 15 kg

Packages/pallet

Pallet weight

600 kg

Primers, bonding agents and cement paints Sopro BK 544 Adhesion promoter and suction-control coat

High-alkali-resistant synthetic dispersion mixed with quartz sand for pretreatment of indoor mineral substrates, especially concrete, which are unsuitable for direct application of gypsum plasters due to their low suction, smoothness and density. Sopro BK 554 is used to p rovide a suction-control coat and bonding layer between plaster-incompatible substrates and gypsum or lime/gypsum plasters. Particularly suitable for smooth-faced in-situ concrete, solid concrete slabs made from precast units and screeded precast concrete surfaces. • Sprayable with 2 mm dia nozzle • Adhesion promoter and suction-control coat • High alkali resistance • Colour: oxide red • Drying time: approx. 12 hours • For indoor use

Coverage: 150 – 300 g/m² depending on substrate

Order nr. Packaging

Sopro LFT 848

Special, transparent-white, solvent-free, polymer dispersion-based deep-penetrating primer for stabilizing friable substrates, e. g. cement, lime or lime/cement renders and gypsum plasters. Substantially reduces and evens outs suction of paperless gypsum panels, gypsum plasterboard and gypsum fibreboard. Used to prepare substrates for subsequent wallpapering or plastering. Sopro GD 749 primer shall be used prior to tiling.

Deep-penetrating primer

Packages/pallet

Pallet weight

544-20

Bucket 20 kg

480 kg

544-05

Bucket 5 kg

400 kg

Coverage: 150 – 350 l/m² depending on substrate suction

Sopro DYX 700 Cement paint

Order nr. Packaging 848-05

Canister 5 ltr

Packages/pallet

Pallet weight

320 kg

Hydraulically setting, mineral paint for new-build, refurbishment and architectural conservation schemes. Resistant to water, weather and freeze-thaw cycles. Suitable for coating internal walls in damp and wet spaces vulnerable to fungal attack. Also for use in factory halls, laundries, cellars/basements, garages and stables. • For indoor and outdoor use • Resistant to mould formation • Low-chromate to Regulation 1907/2006 EC, Annex XVII • Colour: white 0

Coverage: 0.6 – 0.8 kg/m² for 3-coat application Protect from frost during transportation and storage.

Order nr. Packaging 700-03

Bag 5 kg

Packages/pallet

Pallet weight

200

1,000 kg

205

Primers, bonding agents and cement paints

• Solvent-free • Water-vapour-permeable • Very high coverage • High penetration and stabilizing effect • Saponification-resistant • For walls and ceilings, indoors and outdoors

Primers, bonding agents and cement paints Sopro KQS 607 Crystal quartz sand

Used in preparing Sopro FEP three-component epoxy tile grout. • Kiln-dried

Order nr. Packaging 607-21

Sopro QS 507 Fine silica sand (0.10 – 0.30 mm)

Bag 25 kg

Packages/pallet

Pallet weight

1,050 kg

Used in preparing surface fillers and for blinding epoxy resin coatings. Approved as system component and individual product for shipbuilding applications (see pages 260 – 262). • Kiln-dried • With ship approval Test certificate BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro EPG 522, Sopro PU-FD 570/571, Sopro QS 511, Sopro's No.1 (order no. 400) and Sopro TFb: MED approval no. 118.316 (wall) and 124.115 (floor), USCG approval no. 164.112/EC0736/118.316 (wall) and 164.117/EC0736/124.115 (floor)

Order nr. Packaging 507-21

Sopro QS 511 Coarse silica sand Primers, bonding agents and cement paints

(0.40 – 0.80 mm)

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Used in preparing surface fillers and for blinding epoxy resin coatings. Approved as system component and individual product for shipbuilding applications (see pages 260 – 262). • Kiln-dried • With ship approval Test certificate BG Verkehr (institution for statutory accident insurance and prevention for transport and traffic): – Approval for shipbuilding as system component with Sopro EPG 522, Sopro QS 507, Sopro PU-FD 570/571, Sopro's No.1 (order no. 400) and Sopro TFb: MED approval no. 118.316 (wall) and 124.115 (floor), USCG approval no. 164.112/EC0736/118.316 (wall) and 164.117/ EC0736/124.115 (floor)

Order nr. Packaging 511-21

206

Building chemical products

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Concrete Concrete repair systemrepair system

Quality-controlled concrete refurbishment system

Substrate Defective concrete with corroded steel reinforcement; remove loose concrete, derust reinforcing steel; cleaning grade SA 2½

Corrosion protection Sopro Repadur KS PCC, 1st and 2nd coat

Mortar bonding layer Sopro Repadur MH PCC

Reproﬁling Sopro Repadur 50 or Sopro Repadur 40 S 1)

Finish

Product-systems

Sopro Repadur 5 or Sopro Repadur 10 S

When using Sopro Repadur 40 S, apply a mixture of Sopro HE 449 bonding emulsion, water and Sopro Repadur 40 S as contact slurry.

* When using Sopro Repadur 40S, apply a mixture of Sopro HE 449 bonding emulsion, water and Sopro Repadur 40S as contact slurry.

207

ZR Turbo XXL system Basement waterprooﬁ ng system

Structural waterprooﬁng with reactive cementitious membrane according to DIN 18 533 Substrate Masonry

Substrate preparation Primer GD 749

Waterprooﬁng Sopro ZR Turbo XXL

1st waterproof coat

2nd waterproof coat

Insulation Insulation, glued with Sopro ZR Turbo XXL

Protective layer Sopro KDS 663 basement drainage mat

Angle ﬁllet

Product-systems

Sopro RAM 3® renovation and levelling mortar

208

Building chemical products

Basementng waterproofing Basement waterprooﬁ system system

Waterprooﬁng with bitumen coating according to DIN 18 533 part 3 Substrate Masonry

Substrate preparation Sopro KDG 751 primer for base- Sopro KDV 681 primer for ment waterproofing Concentrate basement waterproofing

Waterprooﬁng 1st waterproof coat

1st waterproof coat

Sopro KSP 652 waterproof basement coating

Two-component waterproof basement coating

Scrim reinforcement Sopro KDA 662 scrim for basement waterproofing

2nd waterproof coat

(embedded in 1st waterproofing coat)

Protective layer Sopro KDS 663 basement drainage mat

Angle ﬁllet Sopro RAM 3® renovation and levelling mortar

Damp-proof course/plinth area Sopro TDS 823 two-component turbo sealing slurry or Sopro ZR Turbo XXL

Product-systems

2nd waterproof coat

209

SoproThene® system SoproThene®-System

Waterprooﬁng with cold-applied, self-adhesive bitumen sheet membrane according to DIN 18 533 part 2 Substrate Masonry

Substrate preparation SoproThene® primer 879

Waterprooﬁng SoproThene® nonwoven edging tape 878 SoproThene® aluminium edging tape 878 SoproThene® bitumen sheet membrane 878 SoproThene® corner tape 878 SoproThene® adhesive tape 878

Protective layer Sopro KDS 663 basement drainage mat

Angle ﬁllet Sopro RAM 3® renovation and levelling mortar

Damp-proof course/plinth area Product-systems

Sopro TDS 823 two-component turbo sealing slurry or Sopro ZR Turbo XXL

210

Building chemical products

TDS 823 patio system Sopro ZR 618 patio system

Waterprooﬁng of patios and terraces prior to installation of cast stone coverings or patio decking Substrate Concrete

Substrate preparation Sopro GD 749 primer

Waterprooﬁng 1st waterproof coat

Sopro TDS 823 two-component turbo sealing slurry

2nd waterproof coat

Drainage Sopro DRM 653

Sopro DMX 619

Combed bed Sopro megaFlex S2 MEG 665 or Sopro megaFlex S2 turbo MEG 666

Grouting

Product-systems

Sopro FL plus

211

Tile fixing products

Index of contents Tile adhesive – Tile adhesive coverage chart – Application matrix for Sopro tile adhesives

Tile grouts – Tile grout coverage chart – Application matrix for Sopro tile grouts – Application matrix for Sopro sealants

Surface fillers/renders – Application matrix for Sopro surface fillers/renders

Primers and bonding agents – Application matrix for Sopro primers and bonding agents

Waterproofings – Application matrix for Sopro water proofings

Accessories

Information

Gardening and landscaping products

Building chemical products

– Impact sound insulation and separating layer systems

4 23 24 28 41 47 48 50 68 70 75 76 94 96 100

Cleaning, impregnation and maintenance

102

Tiling tools

111

Tile fixing product systems

117

Bitumen products, sealing slurries and silification – Application matrix for Sopro water proofings

146 155

Screeds, binders and construction resins

166

Mortar and screed additives

177 180

– Application matrix for Sopro screeds and drainage mortars

Underground construction, gully-repair and shrinkage-compounded grouts

182

Surface fillers, renders and rapid-set mortars

184

Concrete repair

197

Primers, bonding agents cement paints and silica sands

200

Building chemical product systems

207

Drainage and bedding mortars

214

Paving grouts

219 224

– Paving grout coverage chart

Waterproofings

226

Surface gradient fillers and rapid-set mortars

230

Cleaning, impregnation and maintenance

233

Landscaping product systems

236

Conditions of sale and delivery

243

Sopro International

247

Sustainability/Quality management

248

European standards for tile adhesives and tile grouts

251

Sopro shipbuilding systems

255

Sopro grouting colours

261

Landscaping products

Drainage and bedding mortars

Drainage and bedding mortars Sopro HSF 748 Flexible bonding slurry with trass enish Rh

Trass or

i g i n al

One-component, trass-bearing, polymer-modified bonding and contact slurry for laying of natural or cast stone coverings and paving units. – As flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. Particularly suitable for laying of tiles with low water absorption (fully vitrified stoneware) – As bonding layer applied to bedding mortar or substrate – As bonding layer for separate (bonded) screeds – As bonding layer in conjunction with Sopro DM 610 drainage mortar, Sopro DMX 619 drainage mortar eXtra or other porous screed types with single-size grading – For application in conjunction with Sopro TVM 858 thick-bed mortar with trass • For floors, indoors and outdoors • Strong adhesion/bonding for installed coverings • Particularly suitable for use in conjunction with floor heating • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: 1.0 – 1.5 kg/m² for powder application; 1.5 – 2.0 kg/m² for slurry application

Sopro DM 610 Drainage mortar

CT-C25-F4

Trass

DI N

enish Rh

ted to es

E N 13 8

i g i n al

Order nr. Packaging 748-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Trass cement-bonded bedding mortar for laying natural stones, pavers, flags and tiles in outdoor areas. Due to grading curve, a highly-water-permeable mortar bed is achieved which has virtually no capillary suction, thereby effectively preventing water damage, such as e fflorescence and structural damage caused by frost, on balconies, p atios, stairs, landings and other external areas. The covering material is laid wet-on-wet using Sopro HSF 748. • Ready to receive floor covering: after approx. 3 days • For floors, indoors and outdoors • Very high water permeability • Very good workability • Pumpable • For laying on mortar beds with min. 2 cm coat thickness • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificate Available upon request

Coverage: approx. 16 kg/m² per cm coat thickness

214

Landscaping products

Order nr. Packaging 610-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Sopro DMX 619 Drainage mortar eXtra

CT-C25-F4

Trass

R BIN D

i g i n al

ent – te r em

SZ-T

e ag

w shrink Lo

shr

g inka

ry system na

S CRY TAL

E LIN

HIG H

EN 1

pid-hard c Ra

DI N

enish Rh

ted to es

Rapid-set, special cement-bound, premixed dry mortar with special single-sized grading and rapid strength development for indoor and outdoor laying of tiles and natural stone units, particularly on balconies and patios. Extra reliability thanks to highly pervious, largely efflorescence-free mortar bed, which offers full protection against water-induced damage, e.g. microstructural failure through frost action. Drainage performance and efficient removal of infiltrating water is significantly enhanced through installation of Sopro DRM 653 drainage mat. Covering material is subsequently laid wet-on-wet using Sopro HSF 748 flexible bonding slurry with trass. • Ready to receive floor covering: after approx. 24 hours • For floors, indoors and outdoors • Extra-rapid-set: high early strength – grade CT-C25-F4 after only 3 days • Extra-reliable: very high water permeability, largely efflorescence-free • Compressive strength after 28 days: approx. 25 N/mm² • Flexural tensile strength after 28 days: approx. 4 N/mm² • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Test certificate Available upon request

ion rotect d p a r t n eX ies a lcon for ba tios pa

Coverage: approx. 16 kg/m² per cm coat thickness

Sopro DRM 653 Drainage mat 8 mm

Excellent drainage capacity

Order nr. Packaging 619-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Coverage: approx. 1.05 m²/m²

Order nr. Packaging 653-12

Roll (100 cm wide) 12,5 m

Packages/pallet

Pallet weight

approx. 60,5 kg

215

Drainage and bedding mortars

Drainage and bedding mortars Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds. For industrial and hall floors, workshops and spaces subject to high mechanical and chemical loads. Used to produce water-permeable single-sized aggregate mortars for laying of bridge kerbstones. For production of capillary breaking joints in swimming pools.

Sopro BH 869 Construction resin

• Floors, indoors and outdoors • Working life: approx. 50 minutes • Walkable: after approx. 12 hours • GISCODE RE 1

Coverage: as primer: 250 – 350  g/m² as resin mortar: 170 – 210  g/m² and mm thickness as raisin mortar in conjunction with Sopro EEK 871

Order nr. Packaging

Sopro DEK 872

Used in conjunction with Sopro BH 869 construction resin, Sopro DEK 872 drainage screed aggregate, continuously graded in 1,4 – 3,15 mm range, produces a drainage resin screed achieving grade SR-C20-F6 to DIN EN 13 813. For the construction of a thin layered drainage mortar for the consecutive laying of cermic tiles, concrete stones and agglomerate stones. For the construction of a waterpermeable and efflorescence-free mortar bed. Drainage performance and efficient removal of infiltrating water is significantly enhanced through installation of Sopro DRM 653 drainage mat. Ideal for use on refurbishment contracts with low panel thicknesses. Excellent working properties, combined with a long working life, ideal for outside use.

ted to 1) es

w shrink Lo

E N 13 8

SR-C20-F6 N

e ag

Drainage screed aggregate

shr

inka

Packages/pallet

Pallet weight

869-16

Bucket 16 kg component A

352 kg

869-08

Bucket 8 kg component B

360 kg

869-12

Bucket 12 kg (combi pack)

360 kg

869-05

Bucket 5 kg (combi pack)

225 kg

869-01

Pot 1 kg (combi pack)

240

240 kg

Coverage: approx. 16 kg/m² per cm coat thickness

216

Landscaping products

Protect from frost during transportation and storage.

Order nr. Packaging 872-21

Bag 25 kg

In conjunction with Sopro BH 869.

Packages/pallet

Pallet weight

1,000 kg

Sopro TRB 421

CT-C20-F3 N

E N 13 8

rüft na ep

DI N

CT-C35-F5

ted to 1) es

Binder with trass

E N 13 8

enish Rh

Trass or

i g i n al

Special trass-bearing, cementitious binder for preparation of thick-bed adhesives, wall tile adhesives and drainage mortars. For preparation of smooth, easily workable, highly resistant and dense mortars for indoor and outdoor use, particularly suitable for laying sensitive, discoloration-prone natural stone coverings. For ceramic tiles and coverings, terracotta and cast stone units. High trass content significantly reduces risk of efflorescence, bloom and discoloration. Incorporation of Sopro DRM 653 drainage mat is recommended to further enhance drainage performance. Requires mixing on site with (0 – 4 mm graded) sand or (0 – 8 mm graded) screed sand. Drainage mortar may be produced by mixing with 2 – 5 mm, 5 – 8 mm or 8 – 12 mm graded quality chippings or 4 – 8 mm graded rounded aggregate. • For indoor and outdoor use • For mortar bed thicknesses upwards of 15 mm • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Binde

Mixing ratio 1 : 4 (25 kg TRB 421 : 100 kg EEK 871)

Mixing ratio 1 : 4 (25 kg TRB 421 : 100 kg DEK 872)

Coverage: 3.5 – 4.0 kg/m² per cm coat thickness; 350 – 400 kg/m³

Sopro TVM 858 Thick-bed mortar with trass

enish Rh

Trass or

i g i n al

Order nr. Packaging 421-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Hydraulically setting, trass-bearing, cementitious mortar for laying and bonding of discoloration-sensitive natural stone units (e. g. Solnhofen stone tiles, Jura marble), cast stone units and window sills, using thickbed method to DIN 18 352, DIN 18 332 and DIN 18 333. For levelling substrates made from cementitious materials, e. g. screeds and concrete, in 10 – 40 mm mortar beds. Application in conjunction with Sopro HSF 748 flexible bonding slurry with trass. • For walls and floors, indoors and outdoors • Classed under mortar group III to DIN 1053 • For paving units • For natural and cast stone units • For laying glass blocks to DIN EN 4242 • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Coverage: approx. 1.7 kg/m² per mm coat thickness.

Order nr. Packaging 858-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

217

Drainage and bedding mortars

NEW

Rapidur® M 8

Rapid-set screed mortar

ted to es

CT-C25-F4-A12 EN 1

• Ready for tiling: after 48 – 72 hours, ready to receive particularly impervious floor coverings, e.g. linoleum, PVC etc., and wood or parquet flooring after achievement of residual moisture content ≤ 1.8% CM • For indoor and outdoor use • Working life: 4 – 5 hours • Walkable: after approx. 24 hours • High resistance to moisture migration from substrate • Coat thickness: 20 – 100 mm • Suitable for floor heating systems • Pumpable • Heating system commissioning: after approx. 5 days • Grading: 0 – 4 mm • Adapted perimeter insulation stripe • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

DI N

e -to-us Ready mix d scree

Coverage: 19 – 21 kg/m² per cm screed thickness; 1,900 – 2,100 kg/m³

Sopro VMS 744 Rapid-set grout

R BIN D

pid-hard c Ra

High loadability

Coverage: approx. 2.1 kg per mm coat thickness

218

Landscaping products

ent – te r em

ry system na

S CRY TAL

E LIN

HIG H

Drainage and bedding mortars

SZ-T

Order nr. Packaging 601-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

High-fluidity, shrinkage-compensated, rapid-set, cementitious grout with rapid strength development and high early strength. For grouting heights up to 15 cm. For grouting manhole frames and adjustment rings, for fixing signs, masts, posts and the like. For use in concrete construction and repair works, for industrial flooring and vehicular pavements that need to be reopened to traffic within a short period. Also suitable for setting fence posts. • For indoor and outdoor use • Extra-rapid strength development • 0 – 2.5 mm grading • Grouting height: up to 15 cm; for thicknesses upwards of 5 cm, may be extended with 2 – 8 mm gravel; for small applications (e. g. for grouting manhole frames) up to 20 cm product can be applied unextendedly • Shrinkage-compensated • Start of set: after approx. 15 minutes • End of set: after approx. 30 minutes • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Order nr. Packaging 744-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Paving grouts

Sopro EPF Two-component epoxy paving grout For joint widths from 5 mm For outdoor use For light- to medium-duty stone and other pavings (e. g. in pedestrian precincts, parks, residential streets and car parks) Resistant to suction sweeper loads Suitable for high-pressure water jetting Straightforward application May be slurry-applied Resistant to frost and de-icing salts Bucket 25 kg

Paving grouts

Soproâ&#x20AC;&#x2DC;s water-permeable paving grouts

Sopro PF One-component paving grout For joint widths from 3 mm For outdoor use For light-duty stone and other pavings, (e. g. on patios, garden paths and surfaces, yards and driveways) Water-permeable Suitable for high-pressure water jetting Straightforward application Ready-to-use Resistant to frost and de-icing salts Bucket 25 kg and 10 kg

219

Paving grouts Sopro PF One-component paving grout

Paving grouts

Excellent drainage capacity

One-component, resin-modified, solvent-free, pre-mixed, atmosphericoxygen-curing grout for light-duty stone and other pavings, e. g. on patios, garden paths and surfaces, yards and driveways. • For joint widths from 3 mm • For outdoor use • Water-permeable • Suitable for high-pressure water jetting • Straightforward application • Ready-to-use • Resistant to frost and de-icing salts Test certificates Available upon request

Colour

Coverage: 1.7 kg for 1 ltr fresh mortar. See pages 224 – 225

Sopro EPF Two-component epoxy paving grout

Excellent drainage capacity

Bucket 25 kg

Bucket 10 kg

pavement grey 13

671-25

671-10

sand 36

670-25

670-10

anthracite 66

672-25

672-10

Packages/pallet

Pallet weight

Packaging Bucket 25 kg (vacuum sealed)

600 kg

Bucket 10 kg (vacuum sealed)

480 kg

Two-component, solvent-free, water-emulsifiable epoxy resin grout for light- to medium-duty stone and other pavings, e. g. in pedestrian precincts, parks, residential streets and car parks. • For joint widths from 5 mm • For outdoor use • Water-permeable • Resistant to suction sweeper loads • Suitable for high-pressure water jetting • Straightforward application • May be slurry-applied • Resistant to frost and de-icing salts Test certificates available upon request

Coverage: 1.7 kg for 1 ltr fresh mortar. See pages 224 – 225

220

Landscaping products

Protect from frost during transportation and storage.

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

594-25

pavement grey 13

Bucket 25 kg (24.5 kg sand/resin mix, 0.5 kg curing agent)

600 kg

595-25

sand 36

Bucket 25 kg (24.5 kg sand/resin mix, 0.5 kg curing agent)

600 kg

596-25

anthracite 66

Bucket 25 kg (24.5 kg sand/resin mix, 0.5 kg curing agent)

600 kg

Paving grouts Sopro HFE Epoxy paving grout

Water-emulsifiable, solvent-free, two-component epoxy grout for natural stone and other pavings. Used to produce water-impermeable joints in heavy-duty s urfaces, e. g. roads, streets, car parks and loading bays.

High loadability

Paving grouts

• For joint widths upwards of 10 mm • For outdoor use • Compressive strengths ≥ 45 N/mm² • Waterproof (subject to inadequate compaction) • Resistant to suction sweeper loads • Suitable for high-pressure water jetting • Straightforward application • May be slurry-applied • Resistant to frost and de-icing salts Test certificates available upon request

Coverage: 1.8 kg for 1 ltr fresh mortar. See pages 224 – 225

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

693-25

pavement grey 13

Bucket 25 kg (24.15 kg sand/resin mix, 0.85 kg curing agent)

600 kg

694-25

sand 36

Bucket 25 kg (24.15 kg sand/resin mix, 0.85 kg curing agent)

600 kg

Load classifications for paving grouts Use category

Traffic load class

Duty class

Load

Suitable for

Under „ZTV Wegebau“ (2013)

Under „DNV Pflaster“ (2014)

Under „RStO“ (2012)

Number of equivalent 10-tons axle loads (millions)

N 1

VBK 1

Pavements for foot traffic only, outside road traffic areas, e.g. terraces, footpaths

N 2

VBK 2

Pavements traffickable by vehicles with up to 3.5 t total p ermissible weight, outside road traffic areas, e.g. garage driveways, car parking spaces

N 3

VBK 3

Pavements traffickable by vehicles with occasional loads of up to 20 t with wheel loads ≤ 5 t, outside road traffic areas, e.g. garage and building driveways

VBK 4

Bk 0.3

0.3

Road traffic areas rarely subject to heavy-goods traffic, e.g. footpaths or cycle paths

VBK 5

Bk 1.0

Over 0.3 to 1.0

Road traffic areas subject to low level of heavy-goods traffic, e.g. residential streets

VBK 6

Bk 1.8

Over 1.0 to 1.8

Road traffic areas subject to heavy-goods traffic, e.g. pedestrian zones with delivery vehicles

VBK 7

Bk 3.2

Over 1.8 to 3.2

Road traffic areas frequently subject to heavy-goods traffic, e.g. bus routes, primary residential roads

Sopro PF 1-K and Sopro EPF 2-K grouting colours pavement grey 13

sand 36

anthracite 66

pavement grey 13

sand 36

Sopro HFE grouting colours

Protect from frost during transportation and storage.

For technical reasons, the colours shown here may diverge from those of the fully cured material.

221

Paving grouts Sopro TNF Natural stone grout with trass 5 – 40 mm s Te

enish Rh

ted to

Paving grouts

Extra-high abraision resistance

Trass

DI N

Reduced water absorption

CG2 WA

E N 13 8

i g i n al

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

674-21

grey15

Bag 25 kg

1,000 kg

675-21

pavement grey 13

Bag 25 kg

1,000 kg

677-21

sandgrey 18

Bag 25 kg

1,000 kg

Coverage: See pages 224 – 225

676-21

anthracite 66

Bag 25 kg

1,000 kg

684-21

beige 32

Bag 25 kg

1,000 kg

Sopro PFM HF®

Rapid-set, trass-bearing, cementitious paving grout, specially for heavyduty natural and concrete pavings. The trass content serves to reduce efflorescence. Particularly suitable for heavy-duty street/road surfaces, pedestrian precincts, hard landscaping and areas exposed to water jetting, frost and de-icing salts.

High-strength paving grout 5 – 30 mm s Te

enish Rh

ted to

Extra-high abraision resistance

Trass

DI N

Reduced water absorption

EN 1

CG2 WA

i g i n al

• For 5 – 30 mm joint widths • For outdoor use • Compressive strengths ≥ 68 N/mm² • Resistant to suction sweeper loads • Suitable for high-pressure water jetting • Resistant to frost and de-icing salts • Early walkability and loadability • Low-chromate to Regulation 1907/2006 EC, Annex XVII Test certificates Available upon request

High loadability

Coverage: 1.9 kg for 1 ltr . See pages 224 – 225

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

575-21

grey 15

Bag 25 kg

1,000 kg

574-21

pavement grey 13

Bag 25 kg

1,000 kg

576-21

anthracite 66

Bag 25 kg

1,000 kg

Sopro TNF grouting colours grey 15

pavement grey 13

sandgrey 18

anthracite 66

beige 32

grey 15

pavement grey 13

anthracite 66

Sopro PFM grouting colours 222

Landscaping products

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Sopro BSF 611 Paving grout for concrete units 5 – 30 mm s Te

Reduced water absorption

CG2 WA N

enish Rh

ted to

Extra-high abraision resistance

E N 13 8

Trass or

i g i n al

High loadability

ing grout tr o f l Idea in precas s l joints e channe et r c n o c

Coverage: 1.9 kg for 1 ltr fresh mortar. See pages 224 – 225

Sopro FH 867 Paving grout cleaning aid

Rapid-set, trass-bearing, cementitious paving grout, particularly suitable for in concrete segmental pavements in gardens/landscaped areas and in medium- to heavy-duty vehicular pavements, including areas exposed to frost and de-icing salts. Specially tailored to properties of concrete pavers (e.g. in respect of strength and temperature behaviour). Suitable for linear structures, e. g. roads and drainage channels, for roundabouts and for hard landscaped areas, e. g. marketplaces. Contains Rhenish trass. Use of Sopro PFM highstrength paving grout is recommended for natural stone segmental pavements. • For 5 – 30 mm joint widths • For indoor and outdoor use • Compressive strengths ≥ 30 N/mm² • Resistant to suction sweeper loads • Suitable for high-pressure water jetting • Resistant to frost and dew-resistant • Early walkability and loadability • More colours available 1) • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Order nr. Colour

Packaging

Packages/pallet

Pallet weight

611-21

Bag 25 kg

1,000 kg

grey 15

Water dissolved, high-alkaline product to achieve temporary water repellency of absorbent concrete and natural stone pavers to facilitate grouting. Sopro FH 867 paving grout cleansing aid penetrates capillary system of mineral pavers to achieve water repellency, thereby allowing easier removal of Sopro paving grouts. Also suitable as cleansing aid for polygonally laid natural stone tiles in wall and floor areas. • For walls and floors, indoors and outdoors • For brush and spray application • Low consumption • For cementitious and epoxy resin bonded Sopro paving grouts

Order nr. Packaging

Coverage: 5 – 15 m²/ltr

Sopro PUD 682 Polyurethane sealant

High loadability

grey

867-05

Canister 5 ltr

867-01

Bottle 1 ltr (Nr 4 in box)

For technical reasons, the colours shown here may diverge from those of the fully cured material.

Pallet weight

480 kg

480 (120 Kartons)

480 kg

Highly elastic, rapid-set, solvent-free, one-component polyurethane sealant for filling horizontal and vertical perimeter and movement joints. Suitable for concrete wall and floor surfaces, pavements and heavy-duty areas, e. g. car parks, supermarkets, warehouses etc. For producing flexible joints at junctions between similar and different types of material. For segmental pavements in pathway, road, garden and landscaped areas. Sopro PPU 683 PU primer is recommended for pretreatment of joint faces. • For walls and floors, indoors and outdoors • Ready-to-use • Sag-resistant • Highly elastic • High weather resistance • Bonds excellently with wide variety of materials • Also suitable for wider joints • Bubble-free curing • Tack-free surface

Order nr. Packaging

Coverage: 840 g for 3.1 m joint (10 × 10  mm)

Packages/pallet

682-73

Aluminium sausage 840 g (à 600 ml) (only available in box with Nr 20)

Packages/pallet

Pallet weight

800 (40 cartons)

672 kg

Sopro BSF 611 is tintable using pigments supplied by relevant concrete product manufacturer. For further details, please contact our applications support team.

223

Paving grouts

Sopro paving grout coverage chart Small setts

Width × length in mm

50 × 50

Joint width in mm Paving grouts

Mosaic pavings

(Joint depth 30 mm)

40 × 60

40 × 40

100 × 200

100 × 120

Approx. coverage (kg/m²)

100 × 100

80 × 100

60 × 80

Approx. coverage (kg/m²)

Sopro PF one-component paving grout 3 1)

5.8

6.0

7.1

2.2

2.7

3.0

3.3

4.3

5 1)

9.3

9.6

11.3

3.7

4.5

4.9

5.4

6.9

14.1

14.5

17.0

5.7

7.0

7.6

8.4

10.6

17.0

17.5

20.4

7.1

8.6

9.3

10.3

13.0

23.5

24.1

27.8

10.2

12.3

13.3

14.7

183

Sopro EPF two-component epoxy paving grout 5 1)

9.3

9.6

11.3

3.7

4.5

4.9

5.4

6.9

14.1

14.5

17.0

5.7

7.0

7.6

8.4

10.6

17.0

17.5

20.4

7.1

8.6

9.3

10.3

13.0

23.5

24.1

27.8

10.2

12.3

13.3

14.7

18.3

—

18.0

18.5

21.6

9.1

9.8

10.9

13.7

24.9

25.5

29.5

10.8

13.0

14.1

15.6

19.3

Sopro HFE epoxy paving grout

Sopro TNF natural stone grout with trass/Sopro PFM high-strength paving grout/Sopro BSF 611 paving grout for concrete units

224

Landscaping products

10.4

10.7

12.7

4.1

5.0

5.4

6.1

7.7

15.7

16.2

19.0

6.4

7.8

8.4

9.4

11.9

19.0

19.5

22.8

7.9

9.6

10.4

11.5

14.5

26.3

27.0

31.1

11.4

13.8

14.9

16.4

20.4

Note: For 5 – 8 mm joint widths, Sopro PF one-component paving grout and Sopro EPF two-component epoxy paving grout require particularly intensive compaction.

Sopro paving grout coverage chart Paving flags

Width × length in mm

160 × 180

(Joint depth 30 mm)

140 × 180

120 × 160

600 × 400

Approx. coverage (kg/m²)

400 × 400

300 × 300

200 × 200

Approx. coverage (kg/m²)

Paving grouts

Joint width in mm

Large setts

Sopro PF one-component paving grout 3 1)

1.8

1.9

2.2

0.6

0.8

1.0

1.5

5 1)

2.9

3.1

3.6

1.3

1.7

2.5

4.6

4.9

5.6

1.7

2.0

2.7

3.9

5.7

6.1

6.9

2.1

2.5

3.3

4.9

8.3

8.9

10.0

3.1

3.7

4.9

7.1

Sopro EPF two-component epoxy paving grout 5 1)

2.9

3.1

3.6

1.1

1.3

1.7

2.5

4.6

4.9

5.6

1.7

2.0

2.7

3.9

5.7

6.1

6.9

2.1

2.5

3.3

4.9

8.3

8.9

10.0

3.1

3.7

4.9

7.1

—

6.0

6.4

7.3

2.2

2.6

3.5

5.1

8.8

9.4

10.6

3.3

3.9

5.1

7.5

Sopro HFE epoxy paving grout

Sopro TNF natural stone grout with trass/Sopro PFM high-strength paving grout/Sopro BSF 611 paving grout for concrete units 5

3.3

3.5

4.0

1.2

1.4

1.9

2.8

5.1

5.5

6.3

1.9

2.2

3.0

4.4

6.4

6.8

7.7

2.3

3.7

5.4

9.3

9.9

11.2

3.5

4.1

5.4

8.0

These tables present approximate values calculated on the basis of practical application. The values may vary upwards or downwards due to the natural form of the flag and sett pavings. In case of doubt, trial laying of a sample area is recommended to determine coverage. Joints depth 30 mm. No liability may be construed and no claims shall be accepted in respect of these details.

225

Waterproofings High-performance, flexible, rapid-set, two-component, cementitious sealing slurry used to produce crack-bridging waterproof coatings. Suitable for use in wet spaces, swimming pools, and on balconies and patios. For structural waterproofing and internal coating of process water tanks Maximum flexibility thanks to MicroGum® technology.

Sopro TDS 823 Two-component turbo sealing slurry

• For walls and floors, indoors and outdoors • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W1-E and W4-E to DIN 18 533, based on W2.1-E and W3-E (based on DIN 18 195 Parts 4 and 6) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Rapid-set (approx. 2 hours per coat) • Rainproof after only approx. 2 hours • Withstands 3 bar water pressure after only approx. 6 hours • Crack-bridging after only approx. 6 hours • Also suitable for cold season • Very low consumption rate; creamy consistency for smooth application • Water-vapour-permeable • Also suitable for structural waterproofing • For brush, roller, trowel and spray application • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro Bauchemie GmbH

MicroGum®Technology

C 0°

R BIN D

to -

ry system na

ent – te r em

pid-hard c Ra

E LIN

HIG H

S CRY TAL

SZ-T

Test certificates Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Only powder component A.

Order nr. Packaging

Coverage: approx. 1.6 kg/m² per mm coat thickness 1)

Packages/pallet

Pallet weight

823-10

Duo Pack 20 kg: Bag 10 kg with powder component A

630 kg

823-44

Canister 10 kg with liquid component B

600 kg

823-01

Duo Pack 9 kg: Bag 4,5 kg with powder component A

200

900 kg

823-02

Canister 4,5 kg with liquid component B

405 kg

Sopro DSF 423 Two-component flexible sealing slurry

• For walls and floors, indoors and outdoors • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Fibre-reinforced and water-vapour-permeable • For brush, roller, trowel and spray application • Approved as system component for shipbuilding applications (see pages 260 – 262) • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

0°

Sopro Bauchemie GmbH

to -

Test certificates Available upon request

Order nr. Packaging

Coverage: approx. 2.0 kg/m² per mm coat thickness 1)

226

Landscaping products

Protect from frost during transportation and storage.

Packages/pallet

Pallet weight

423-23

Duo Pack 32 kg: 32 kg packaging comprises: Bag 24 kg with powder component A

960 kg

423-43

Canister 8 kg with liquid component B

480 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Waterproofings Flexible, one-component, cementitious sealing slurry used to p roduce crack-bridging waterproof coatings. Suitable as waterproof membrane for use on balconies and patios, in showers, washrooms, toilets and swimming pools. For internal coating of process water tanks with max. 4 m water depth.

Sopro DSF 523 One-component flexible sealing slurry

Sopro Bauchemie GmbH

Waterproofings

Coverage: approx. 1.4 kg/m² per mm coat thickness 1)

Order nr. Packaging

Sopro DSF 623

One-component flexible rapid-set sealing slurry

Packages/pallet

Pallet weight

523-20

Bag 20 kg

1,000 kg

523-10

Bag 10 kg

700 kg

• For walls and floors, indoors and outdoors • Based on action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W0-I to W3-I to DIN 18 534 (equivalent to Moisture Exposure Classes A and A0 to DIBt Construction Products List and ZDB data sheet) • Water action class W1-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Working life: approx. 50 minutes • Quick-drying (approx. 2 hours per coat) • Also suitable for process water tanks • Water-vapour-permeable • For brush, roller, trowel and spray application • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro Bauchemie GmbH

Test certificates Available upon request

Coverage: approx. 1.4 kg/m² per mm coat thickness 1)

Order nr. Packaging

Packages/pallet

Pallet weight

623-20

Bag 20 kg

1,000 kg

623-10

Bag 10 kg

700 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

227

Waterproofings Flexible, high-coverage, rapid-drying, reactive, two-component, cementitious waterproof membrane. For waterproofing balconies and patios. For waterproofing of solid, strong existing tile coverings on balconies and patios (tile-on-tile). Also suitable for waterproofing external basement walls, for application to existing bitumen waterproofings, as horizontal damp-proof membrane on ground slabs, as negative-side (internal) membrane, for structural refurbishment, plinth waterproofing and damp-proof courses, for internal waterproofing of process water tanks with max. 10 m water depth. Excellent sag resistance for easier application. Maximum flexibility thanks to MicroGum® technology. Very low consumption rate and outstanding workability, even in unfavourable weather conditions.

Sopro ZR 618

nsumptio co

ate nr

Low

Rapid-drying, two-component, cementitious waterproof membrane

MicroGum®Technology

pid-hard c Ra

R BIN D

• For walls and floors, indoors and outdoors • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • Water action classes W1-E and W4-E to DIN 18 533, based on W2.1-E and W3-E (based on DIN 18 195 Parts 4 and 6) • Water action classes W1-B and W2-B to DIN 18 535 (equivalent to Moisture Exposure Class B to DIBt Construction Products List) • Very high coverage • Reliable, rapid drying • Highly flexible and bitumen-free • Withstands 2.5 bar water pressure after only approx. 6 hours • Rainproof after only approx. 3 hours • Crack-bridging after only approx. 6 hours • Water-vapour-permeable • Visual drying control through colour change • For brush, roller, trowel and spray application • Overcoatable and suitable as plastering/rendering background • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

SZ-T

n exceptio

Sopro Bauchemie GmbH

0°

Waterproofings

ent – te r em

ry system na

Lightg!e a r t X X e covera ally high

S CRY TAL

E LIN

HIG H

High coverage

to -

Test certificate Available upon request

Only powder component A.

Coverage: approx. 1.2 kg/m² per mm coat thickness 1)

Order nr. Packaging

Sopro DS 422

Cementitious sealing slurry used to provide waterproof barrier against surface and seepage not subject to hydrostatic pressure on masonry, concrete and plasterwork. Used for new-build and r efurbishment schemes in building construction and civil engineering, and process water tanks with max. 5 m water depth.

Sealing slurry

Packages/pallet

Pallet weight

618-20

Combi package 20 kg

360 kg

618-09

Combi package 9 kg

270 kg

• For indoor and outdoor use • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Coverage: 3 – 6 kg/m² depending on application and duty

228

Landscaping products

Protect from frost during transportation and storage.

Order nr. Packaging 422-21

Bag 25 kg

Under DIN standards, an extra coat thickness of 25 % is required for wet coat thickness.

Packages/pallet

Pallet weight

1,000 kg

Waterproofings

Waterproofing and separating membrane plus

for balconies and patios

Flexible, crack-bridging, stress-relieving waterproofing and separating membrane made from high-grade polypropylene. Special nonwoven coating on either side ensures strong bond between membrane and cementitious tile adhesive. Particularly suitable for use as reliable, flexible waterproof membrane and separating layer outdoors on balconies and patios below natural stone coverings and ceramic tiling. Special sheet ensures better stress equalization in response to abrupt temperature changes. Joints are bonded and watertightly sealed using Sopro RMK 818 Racofix® universal adhesive, Sopro MKS 819 Racofix® universal adhesive S or Sopro TDS 823 two-component turbo sealing slurry in conjunction with Sopro AEB 641 sealing tape or Sopro AEB 148 flexible sealing tape. Use of Sopro AEB plus 639 allows installation of natural stone and ceramic coverings without long waiting times. • For walls and floors, indoors and outdoors • Based on action classes IA, IIA, IB and IIB to DIN 18 531 (based on Moisture Exposure Class B0 to ZDB data sheet) • Particularly suitable for balconies and patios • Waterproof, alkali-resistant • For laying large-format fully vitrified stoneware units outdoors • As separating layer to provide stress relief • Flexible and crack-bridging • Ready-to-use, no check on coat thickness required • Rapid and straightforward application • Resistant to microorganisms Test certificate Available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS

Coverage: approx. 1.00 m²/m²

Order nr. Packaging

SoproThene® 878

Bitumen sheet membrane

adon R

ista

639-01

Roll (100 cm wide) 15 m

Packages/pallet

Pallet weight

approx. 232 kg

• Water action classes W1-E and W4-E to DIN 18 533 (equivalent to DIN 18 195 Part 4) • Action classes IA, IIA, IB and IIB to DIN 18 531 (equivalent to Moisture Exposure Class B0 to ZDB data sheet) • For indoor and outdoor use, walls and floors • Flexible and crack-bridging • Self-adhesive • Immediately waterproof and resistant to driving rain • Application temperature: -5 °C to +30 °C Test certificates Available upon request

Order nr. Packaging

Coverage: approx. 1,1 m²/m²

Packages/pallet

Pallet weight

approx. 397 kg

878-01

Roll (100 cm wide) 15 m 1)

878-02

Roll (100 cm wide) 5 m1)

approx. 226 kg

878-04

Roll (30 cm wide) 15 m

approx. 359 kg

878-03

Roll (15 cm wide) 15 m

approx. 359 kg

See matrix of impact sound insulation and separating layer systems on page 100 – 101.

229

Waterproofings

Sopro AEB plus 639

Surface gradient fillers and rapid-set mortars NEW

Sopro VS 582

lls fa

suitab l lso

rates

HIG H

inka

shr

R BIN D

13 e ag

E LIN

S CRY TAL

m ber sub

pid-hard c Ra

ent – te r em

ry system na

External application only in conjunction with suitable waterproof membrane or, as directly usable floor surface, finished with SoproDur® HF-L 513 high-strength epoxy protective coat.

o in g t

E N 13 8

w shrink Lo

ooth fille m

rl ay

le uitab Also s flooring ber for tim

yin g to f

CT-C35-F7 DI

formulation

ted to 2) es

f-levellin el

Self-levelling filler

SZ-T

Lower strengths are achieved for application as self-levelling filler due to higher mixing water requirement.

• Coat thickness: 3 – 70 mm 3) • For floors, indoors and outdoors 1) • 2-in-1 formulation: suitable as self-levelling filler and for laying to falls • Compressive strength after 28 days: approx. 35 N/mm² • Flexural tensile strength after 28 days: approx. 7 N/mm² • Self-levelling • Outstanding mouldability when laid to falls • Quick-drying • Fibre-reinforced • Pumpable • Suitable for floor heating systems • Long working life: 30 – 40 minutes • Walkable: after 2 – 3 hours • Adapted perimeter insulation stripe • Low-chromate to Regulation (EC) No 1907/2006, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Up to 70 mm in bonded construction.

Coverage: approx. 1.7 kg/m² per mm coat thickness

Sopro Racofix® WSM Water-stop mortar

Order nr. Packaging 582-21

Bag 25 kg

Packages/pallet

Pallet weight

1,000 kg

Cementitious, polymer-modified water-stop mortar used to plug water leaks, e.g. in basements and shafts, and burst pipes. Especially useful against water pressure. When mixed with water, Racofix® water-stop mortar forms a plastic, thixotropic and easily applicable paste. Particularly suitable for plugging drillholes following installation of Sopro VK 690 injection damp-proof course. • Plugs water leaks in seconds • Sets within 90 seconds • High water impermeability • Chloride-free

Coverage: 1.8 kg mortar for 1 ltr void

230

Landscaping products

Order nr. Packaging 680-05

Bucket 5 kg

See also application matrix for surface fillers/plasters/renders on pages 68 – 69.

Packages/pallet

Pallet weight

225 kg

Surface gradient fillers and rapid-set mortars NEW

Sopro RAM 3 454

R BIN D

ooth fille m

rl ay

o in g t

• Coat thickness: 3 – 60 mm 1) • For walls, floors and ceilings • For indoor and outdoor use • Excellent sag resistance, even with greater coat thicknesses • Working life: approx. 20 minutes • Walkable: after approx. 1.5 hours • Ready for tiling: after approx. 2 hours • Meets DIN EN 998-1 requirements, strength class CS IV • Low-chromate to Regulation 1907/2006 EC, Annex XVII Licence – Very low emission according to GEV-Emicode EC1PLUS R

Surface gradient fillers and rapid-set mortars

60 m Up to

lls

hours!

S CRY TAL

Ready for ceramic tiling after only

E LIN

HIG H

Renovation and levelling mortar

For single, full-surface application.

Coverage: approx. 1.5 kg/m² per mm coat thickness; as angle fillet/junction seal 0.4 – 0.5 kg/lfm

Sopro AMT 468 Levelling mortar with trass

enish Rh

Trass or

i g i n al

Coverage: approx. 1.5 kg/m² per mm coat thickness

Order nr. Packaging

Packages/pallet

Pallet weight

454-21

Bag 25 kg

1,000 kg

454-05

Bag 5 kg

200

1,000 kg

Universal, light-grey, sag-resistant, rapid-set, cementítious surface filler applied to walls and floors for patching and smoothing c oncrete, plasterwork, masonry and screed surfaces. Particularly suitable for application as levelling plaster/render and as levelling coat to provide falls in damp and wet spaces or on balconies, patios and steps/stairways. • Coat thickness: 2 – 30 mm • For walls and floors • For indoor and outdoor use • Trass-bearing • Working life: approx. 45 minutes • Walkable: after approx. 6 hours • Ready to receive floor covering: after approx. 12 hours • Low-chromate to Regulation 1907/2006 EC, Annex XVII

Order nr. Packaging 468-21

Bag 25 kg

Packages/pallet

Pallet weight

1,050 kg

231

Surface gradient fillers and rapid-set mortars Racofix® 2000 Rapid-set anchoring mortar

Surface gradient fillers and rapid-set mortars

Test certificate available upon request Licence – Very low emission according to GEV-Emicode EC1PLUS R

Order nr. Packaging

Packages/pallet

Pallet weight

740-45

Bucket 15 kg

495 kg

Coverage: depends on application

740-43

Bucket 5 kg

360 kg

740-81

Bucket 1 kg

480

480 kg

Racofix® 8700

Rapid-set, cementitious anchoring mortar. For fast installation of sanitary appliances, hooks, anchors etc. For rapid laying of kerbs.

Rapid-set anchoring mortar

Order nr. Packaging

Coverage: depends on application

232

Landscaping products

Packages/pallet

Pallet weight

741-45

Bucket 15 kg

495 kg

741-43

Bucket 5 kg

360 kg

741-05

Bag 5 kg

200

1,000 kg

741-81

Bucket 1 kg

480

480 kg

Cleaning, impregnation and maintenance Sopro ZA 703 Cement skin remover for exterior use

Order nr. Packaging

Packages/pallet

Pallet weight

approx. 544 kg

480 (120 cartons)

approx. 558 kg

703-05

Canister 5 ltr

Coverage: 5 – 15 m²/ltr

703-01

Bottle 1 ltr (only available in box with Nr 4)

Sopro KL 709

Special ready-to-use product for refreshing and enhancing colour of matt, unglazed clay and clinker tiles, brick tiles and similar unglazed ceramic wall and floor finishes.

Clinker oil

Order nr. Packaging

Coverage: 5 – 10 m²/ltr

Packages/pallet

Pallet weight

709-83

Canister 5 ltr

approx. 432 kg

709-01

Bottle 1 ltr

480

approx. 456 kg

233

Cleaning, impregnation and maintenance

• Acts quickly and thoroughly • Only suitable for exterior use due to strong odour • Particularly suitable for first-time cleaning of newly laid wall and floor finishes

Cleaning, impregnation and maintenance Sopro RU 632 Rust converter

Cleaning, impregnation and maintenance

Order nr. Packaging

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 624 kg

Coverage: 7 – 15 m²/ltr

632-01

Sopro KA 631

Power cleaner for outdoors

Bottle 1 ltr (only available in box with Nr 4)

• High-efficiency cleaning • Extra-strong concentrate • Rinse only with water after application time • For outdoor use

Order nr. Packaging

Coverage: 30 – 50 m²/ltr

234

Landscaping products

631-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 564 kg

Cleaning, impregnation and maintenance Sopro NFS 704 Natural stone stain stop

Order nr. Packaging

Packages/pallet

Pallet weight

480 (120 cartons)

approx. 540 kg

Coverage: 5 – 15 m²/ltr

704-01

Sopro NFV 705

Special product for enhancing natural colour and texture of natural stone surfaces which appear too pale and colourless or which need to match colour of polished surface.

Natural stone colour enhancer

Bottle 1 ltr (only available in box with Nr 4)

• For absorbent, porous natural/cast stone and marble • Non-glossing • For indoor and outdoor use Please note: Do not apply until surfaces are fully dry (4 – 6 weeks after laying)!

Order nr. Packaging

Coverage: approx. 10 m²/ltr

705-83

Canister 5 ltr

705-01

Bottle 1 ltr (only available in box with Nr 4)

Packages/pallet

Pallet weight

approx. 456 kg

480 (120 cartons)

approx. 480 kg

235

Cleaning, impregnation and maintenance

Do not apply until surfaces are fully dry (4 – 6 weeks after laying)!

Marble systemHigh-strength paving grout system Robust, durable installation of 2 cm fully vitriďŹ ed stoneware tile coverings of bound construction on balconies and patios Substrate Concrete (with Sopro GD 749 primer)

Substrate preparation Sopro TDS 823

Drainage Sopro DRM 653

Mortar bed Thin-layer construction from 2 cm: Sopro BH 869 with Sopro DEK 872

Sopro DMX 619

Bonding and contact layer Sopro megaFlex S2 MEG 665 or Sopro megaFlex S2 turbo MEG 666 or Sopro megaFlex TX MEG 667

System component

Grouting Sopro FL plus

236

Landscaping products

System component

Paving grout system Paving grout system

Laying and grouting of pervious pavings

Substrate Compacted gravel bed

Mortar bed Sopro DM 610 drainage mortar

Bonding and contact layer

Product-systems

Sopro HSF 748 flexible bonding slurry with trass

Grouting Sopro PF one-component paving grout

Sopro EPF two-component epoxy paving grout

237

Epoxy paving Epoxy paving grout systemgrout system

Impervious epoxy grouting for heavy-duty pavings

Substrate Drain concrete

Bonding and contact layer Sopro HSF 748 flexible bonding slurry with trass

Mortar bed Sopro DM 610 drainage mortar

Bonding and contact layer

Product-systems

Sopro HSF 748 flexible bonding slurry with trass

Grouting Sopro HFE epoxy paving grout

238

Landscaping products

Drainage eXtra system Drainage mortar eXtramortar system

Laying of outdoor natural stone coverings using Sopro drainage system Substrate Cement screeds/concrete

Waterproofing 1st waterproof coat

Sopro DSF 423 two-component flexible sealing slurry

2nd waterproof coat

Drainage Sopro DMX 619 drainage mortar eXtra

Bonding and contact layer Sopro HSF 748 or Sopro FKM Silver 600 o r Sopro FKM XL 444

Grouting Sopro PF one-component paving grout

Sopro EPF two-component epoxy paving grout

239

Product-systems

Sopro DRM 653 drainage mat

Soprostone TNF natural grout system Sopro TNF natural groutstone system

Laying and grouting of polygonal coverings, indoors and outdoors Substrate Concrete surface

Bonding layer and combed bed Sopro MDM 888 medium-/thick-bed mortar

Grouting Product-systems

Sopro TNF natural stone grout with trass

240

Landscaping products

stone grout system Concrete stoneConcrete grout system

Cementitious grouting for middle to heavy-duty natural stone pavings Mortar bed Sopro DM 610 drainage mortar

Bonding and contact layer

Product-systems

Sopro HSF 748 flexible bonding slurry with trass

Grouting Sopro BSF 611 Paving grout for concrete units

241

grout system High-strength High-strength paving groutpaving system

Cementitious grouting for heavy-duty pavings

Substrate Concrete

Bonding and contact layer Sopro HSF 748 flexible bonding slurry with trass

Mortar bed Sopro DM 610 drainage mortar

Bonding and contact layer Product-systems

Sopro HSF 748 flexible bonding slurry with trass

Grouting Sopro PFM 575 high-strength paving grout

242

Landscaping products

Conditions of Sale and Delivery Conditions of Sale and Delivery of Sopro Bauchemie GmbH as of March 2018 1. These Conditions of Sale and Delivery only apply to companies as defined in § 14 of the German Civil Code. 2 These Conditions of Sale and Delivery shall likewise automatically apply – without being invoked in each individual case – for all future contracts with the same buyer for the sale and delivery of movable property. 3 Any separate agreements concluded with the buyer for specific transactions shall in all cases take precedence over these Conditions of Sale and Delivery.

6.3 In the event of any violation of the obligations under clauses 6.1 and 6.2 above, we have the right, in particular but not limited to, to refrain from delivering the quantity that has been transported and to charge our freight costs and/or waiting time. More far-reaching claims shall remain unaffected by this clause. A new delivery date shall be agreed as soon as the obligations under clauses 6.1 and 6.2 above have been fulfilled. IV. Collection 1. In the case of collection by vehicles travelling on the buyer’s behalf, the buyer must ensure that:

4 Any references in these Conditions of Sale and Delivery to the applicability of statutory regulations are for information purposes only. Hence, unless specifically modified or expressly excluded in these Conditions of Sale and Delivery, the statutory regulations shall apply in all cases, even in the absence of such references.

1.1 The vehicles are provided with technical equipment such that they can be loaded properly and safely by our loading devices.

II. Entering into the contract

1.3 The driver confirms proper receipt of the products on the delivery note.

1.2 Collection is effected by competent personnel working according to our guidelines.

1. Our supplies and services including proposals, advice and other auxiliary services are provided exclusively on the basis of the following conditions. The buyer’s purchasing conditions are hereby contradicted. They are not recognised, even if we do not explicitly contradict them again on receipt of the buyer’s order. Our conditions shall deem to have been accepted when the products are accepted, if not earlier.

2. The buyer shall ensure that the cargo is safely secured in accordance with all relevant regulations. Given that Sopro may, under road transport regulations, be assigned liability as shipper even where loading and collection are handled by the buyer, Sopro is entitled to:

2. Our quotations are subject to confirmation. Contracts shall deem to have been formed as soon as our written confirmation of the buyer’s order has reached the buyer or we have begun supplying the products. In the case of collection, the contract shall deem to have been formed when the products are handed over at the plant, if not earlier.

2.2. prevent or forbid loading where reasonable doubts exist as to cargo safety;

III. Delivery 1. Unless otherwise agreed, our products are delivered in packed condition ex works Wiesbaden. 2. If the buyer requests that we arrange for transportation, we shall deliver our products with a minimum weight of 3 tons at freight charges to be agreed upon before delivery to the agreed final destination. 3. Prior to delivery the buyer must give accurate details of the recipient and final destination. In case of deliveries to a warehouse, the warehouse shall be the final destination. Changes in final destination must be notified to us immediately. In the case of transfer orders executed by us the buyer must impose on his customers the obligation to provide accurate details and prompt notification of any change in the final destination, with the proviso that the same obligation is imposed on their customers. 4. Should the buyer or any of his customers culpably disregard the obligation in clause 3. above to give accurate details of the final destination or to notify changes promptly, and if for this reason delivery cannot be effected then we have the right to demand damages at a rate of EUR 100 per ton, with a minimum rate of EUR 1,000 per load. The buyer is free to provide evidence that the damages are lower, and we are free to provide evidence of higher damages. 5. Upon delivery we hand over, when the products are handed over, a delivery note that contains details of the quantity, means, day and hour of the delivery, registration number or load number of the vehicle, order, recipient, final destination and buyer. 6. The buyer must ensure that: 6.1 The unloading point is arranged so that vehicles may drive in freely on a good road surface and unload without having to wait. 6.2 The warehouse for the delivery is capable of accepting it in operational terms and that a person authorised for that purpose – including unloading personnel if appropriate – is ready at the unloading point to accept the delivery documentation, to provide details of the storage area, to sign the delivery note and if appropriate to unload.

2.1. check the safe loading of the cargo;

2.3. prevent departure of the vehicle where loading is already complete. V. Delivery time and commitment 1. Delivery deadlines and periods and commitment dates must be detailed in the order. They become legally binding on us only when we have confirmed them explicitly. 2. In the case of delivery deadlines or periods that have been agreed with legally binding force, call-offs must be made in writing or over the telephone with sufficient notice so that it is possible for us to effect timely delivery, but at least 2 working days prior to the deadline. A delivery plan must be agreed for larger orders. 3. The current loading up and call-off times in each case are made known by means of notices circulated by us. Loading up the vehicles takes place during the published loading hours and in the order of the arrival of vehicles. No compensation is paid for any possible waiting times resulting from this. VI. Passage of risk Risk passes over: 1. In the case of delivery free to the final destination/receiving point when the products are handed over at the final destination. In order to ensure that any possible claims against the carrier arising from transporting the products can be asserted, the buyer must ensure that the facts are established in writing and, if possible, countersigned prior to unloading. 2. In the case of collection by vehicles travelling on the buyer’s behalf when the products leave our loading equipment (for example, loading chute, handguided lifting truck, stacker truck, loading conveyor belt or similar). We are not responsible for damages or for losses that arise as a result of or during transportation by vehicles sent by the buyer to collect the products. The same applies for damages that arise as a result of polluted or unsuitable vehicles and loading/unloading appliances belonging to the buyer. 3. When the buyer is in default of acceptance.

Whoever guides the vehicle in shall be deemed an authorised person.

243

Conditions of sale and delivery, Sopro International, Sustainability/Quality management, European standards for tile adhesives/tile grouts, Shipbuilding systems

I. General, scope

Conditions of Sale and Delivery VII. Agreed specifications, processing instructions, consumption data, advice and information 1. Insofar as our supplies and services are described in descriptions of the products, such as brochures, technical information sheets, standards, authorisations in terms of construction supervision permits and similar control documents, these product descriptions are not guarantees of the presence of particular qualities or of particular durability, but agreed specifications. 2. Our processing instructions and technical information sheets can only contain general advice, as the working conditions and fields of application for our products vary considerably. If our products are used for working conditions or fields of application not specified in these documents, we recommend that advantage be taken of our technical advisory service prior to any processing of products. 3. Consumption data in processing instructions and technical information sheets represent average figures experienced. No rights or claims may be asserted against us in the case of actual consumption proving to be more or less. 4. Our technical advisory service and information given verbally and in writing is in line with our knowledge and experience. However, all details and information on the suitability and application of our products are nonbinding and do not exempt the buyer from making his own tests and trials. The buyer is responsible for adhering to legal and official regulations when using our products. VIII. Prices and payment conditions 1. Our prices are ex works Wiesbaden prices, unless something different is explicitly agreed. The prices comply with our price lists in the version current at the time of the order, unless we refer expressly to deviating prices in our order acknowledgement. In that case the deviating prices shall deem to have been agreed if the buyer does not contradict them in writing within 3 business days. The buyer’s contradiction then counts as cancellation of the order. 2. Our purchase price claims become due upon preparation of the invoice(s). Cash discount according to the rates applying on the day of delivery is only granted if no older claims remain outstanding. The amount on which cash discount may be taken and the cash discount period are shown on our invoices. 3. We reserve our position on the acceptance of bills of exchange in respect of each individual case. Cash discounts are not given in such cases. The acceptance of bills of exchange and cheques, and the credit of amounts accruing to us via direct debit, is only on account of performance. The credit of such amounts is furthermore subject to receipt with value on the day on which we may dispose of the funds concerned. All expenses such as discount charges are charged separately. 4. If the buyer falls into arrears of payment, our claims will comply with statutory law. We have the right to fulfil deliveries that are still outstanding only against payment in advance. 5. The buyer shall only be entitled to rights of setoff or retention in cases where its claims are uncontested or have been established as legally effective. In the case of deliveries with defects, the buyer’s counterclaims, specifically pursuant to clause X of these Conditions of Sale and Delivery, shall remain unaffected. IX. Security interests 1. All delivered products remain our property (products subject to retention of title) until all claims have been met, including any balance claims concerned to which we are entitled as part of the business relationship. 2. Processing and conversion of the products subject to retention of title takes places for us as manufacturers, as defined by § 950 of the German Civil Code, without committing us. The processed products count as products subject to retention of title as defined in clause 1 above. 3. In the case of products subject to retention of title being processed and blended with other products, we are entitled to co-ownership in the new item in the ratio of the invoice value of the products subject to retention of title to the invoice value of the other products used. Should our ownership be deleted as a result of products being combined or mixed up, then the buyer here and now transfers to us his right of ownership in the new

244

product or item to the extent of the invoice value of the products subject to retention of title. He holds them in safe custody for us at no charge. The rights of co-ownership arising on this basis count as products to retention of title as defined in clause 1. 4. The buyer may process or dispose of the products subject to retention of title in the normal course of business, on normal business terms and conditions, and provided he is not in arrears, provided the claims arising from the onward disposal of them under clauses 5 to 7 are transferred to us.

The buyer has no right to dispose of the products subject to retention of title in any other way. In particular, the buyer shall be entitled neither to pledge nor otherwise use as security the products subject to retention of title prior to full payment of the secured claims.

5. The buyer’s claims arising from the onward disposal of the products subject to retention of title are herewith assigned to us. They serve as security in the same capacity as the products subject to retention of title. The same shall apply to other claims which replace the products subject to retention of title or which otherwise arise with regard to the products subject to retention of title such as insurance claims or tort claims in case of loss or destruction. 6. If the buyer disposes of the products subject to retention of title with other products not sold by us, then the assignment of the claim arising from the onward disposal shall only extend to the value of our invoice for the products subject to retention of title disposed of in each case. In the case of the disposal of products in which we have co-ownership in accordance with clause 3, the assignment of the claim extends to the value of such co-ownership. 7. If the buyer applies the products subject to retention of title to fulfil a contract for work or contract to supply, then clauses 5 and 6 apply respectively for the claim arising from that contract. 8. The buyer has the right to collect claims arising from the disposal in accordance with clauses 4 and 7 until such time as we contradict. We have the right to revoke direct debit authority if the buyer falls into arrears of payment, discontinues its payments, or if a substantial deterioration in its commercial and financial situation occurs. The buyer is in no case authorised to assign claims. He is obliged, on our request, to advise his customers immediately of the assignment to us – unless we do that ourselves – and to give us the information and documentation necessary to make the collections concerned. 9. Should the realizable value of the existing securities taken all together exceed the claims secured by more than 10 %, then we are obliged, at the buyer’s request, to release securities of our choice to that extent. 10. Should third parties seize products subject to retention of title, particularly by attachment, the buyer shall immediately advise them of our title and shall inform us thereof to enable us to assert our title. 11. In case of breach of contract by the buyer, particularly in case of nonpayment of due purchase prices, we are entitled to rescind the contract and demand surrender of products subject to retention of title. If the buyer does not pay a purchase price due we may only exercise these rights after we have set a reasonable payment deadline or in case such additional deadline is not necessary according to statutory provisions. X. Notice of defects and warranty 1. Unless otherwise provided in the following, the rights of the buyer in case of material and legal defects shall be governed by statutory regulations. The special statutory provisions governing the delivery of products to an end consumer (recourse against supplier under §§ 478, 479 German Civil Code) shall remain unaffected in all cases. 2. The buyer shall ensure that the labelling of the delivery corresponds to the order and that the delivered products are carefully checked for defects immediately upon delivery at the final destination. The products shall deem to have been approved unless we immediately receive a written notice of the facts with regard to apparent defects or other defects which are recognizable by immediate careful inspection, immediately upon receipt of the products, otherwise immediately after discovery of the defect. The buyer shall insure that deliveries with defects are not processed. 3. Weights given with respect to products packed in sacks shall include deviations of the net weight of up to 2 %. Notification of defects with regard to

Conditions of Sale and Delivery weight may only be made based on official re-weighing. In all other cases the weight as determined by the delivering plant shall apply. Complaints about weights may only be asserted within three days of the passage of risk. 4. The notice of defects must contain unambiguous details of the type of products complained of, the type of defect, the batch number, and the day of delivery, and also specify from which plant or warehouse and from which delivery the products came.

Evidence of defects, shortages or wrongly delivered products must be provided, along with the notice of defects, in an appropriate manner. To each notice of defects must be attached a representative sample quantity of the products complained of with details of the batch number, which enables us to look into the complaints raised. The sample must be taken according to the relevant regulations and standards. If such a sample of the products complained of is not available then – for evaluating the products that were delivered – results that we ourselves have established at the buyer’s cost must be used.

5. Under the warranty we will, at our option, eliminate the defect (remedy of defects) or deliver perfect product (subsequent delivery). 6. If a reasonable time period set by the buyer for us to provide subsequent performance (remedy of defects or subsequent delivery) has expired without success, if subsequent performance has failed, or if an additional time period is not necessary for other reasons according to the statutory provisions, the buyer may rescind the agreement or reduce the price according to his choice. The buyer shall, however, have no right of rescission in the case of insignificant defects. The subsequent performance shall be deemed to have failed after the second unsuccessful attempt unless something else follows from the kind of delivery or defect or the circumstances. 7. Claims for damages and compensation claims for unnecessary expenditure due to defects are subject to the limitations of clause XI of these Conditions of Sale and Delivery. 8. Warranty claims shall be subject to the statutory limitation periods. XI. Liability 1. We are not liable for damages, delays or obstacles impeding performance that lie outside our sphere of responsibility. 2. We are not liable for damages that are attributable to any unsuitable or improper use, or for any use of the products delivered which is not in accordance with the requirements under the performance scope of the contract. 3. We are liable for intent and gross negligence. Furthermore, we are liable for all culpable violations of essential contractual obligations as well as for all culpable violations of life, body or health. Essential contractual obligations are the obligation to provide timely delivery free of defects as well as auxiliary obligations which shall ensure that the buyer can use the products as contractually agreed or which are intended to protect life or health, or property from significant damages.

of a temporary nature we may rescind the contract. Insofar as the buyer may no longer reasonably be expected to accept the delivery of services due to the delay he may rescind the contract. Insofar as possible, we will notify the buyer of all Acts of God and circumstances to be treated as such according to sentence 2 immediately. XIII. Place of fulfilment, place or jurisdiction and applicable law 1. The place of fulfilment of our obligation to supply products is: 1.1 The receiving point of the products (all costs paid) at the location of handover at the final destination – in the case of delivery. 1.2 The loading point of the supplying plant – in the case of the products being collected by the buyer. 2. Wiesbaden is the place of performance for all other rights and duties. 3. Wiesbaden is the place of jurisdiction for all disputes arising from and in connection with this agreement. We also have the right to bring an action against the buyer at his general place of jurisdiction. 4. For both sides the contractual relationship is subject exclusively to German law with the exception of German provisions on conflict of laws and the UN Convention on Contracts for the International Sale of Goods. XIV. Data processing The buyer is aware that we process personal data resulting from the contract relationship in accordance with the German Federal Data Protection Act. XV. Required form 1. To be valid, any agreements providing for the annulment or relaxation of the requirement of written form shall themselves be in writing. 2. Insofar as these Conditions specify the written form for the issue of statements or notices by the parties, this requirement shall also be deemed to be met by the ”text form” described under 126b German Civil Code (BGB). XVI. Saving clause Should individual provisions of these Conditions of Sale and Delivery be wholly or partially invalid, that does not affect the validity of the conditions otherwise. The invalid provision is replaced by a valid provision that comes as close as possible to the intention of the contracting parties at the time of entering into the contract and to their commercial interests. The same applies if, and to the extent that, these Conditions of Sale and Delivery include any gaps.

4. In case of slightly negligent violation of essential contractual obligations our liability shall be limited to the typically foreseeable damages. 5. In the case of any damages caused by gross negligence of simple vicarious agents our liability is limited to the typically foreseeable damages. 6. Any further liability is excluded. Liability for guarantees and according to the German Act on Product Liability remains unaffected. Sopro shall have no recourse to the liability limitation provisions under this clause (XI) of these Conditions of Sale and Delivery where a defect has been fraudulently concealed. XII. Act(s) of God If we are unable to fulfil our obligations due to Acts of God – regardless whether affecting us or our suppliers – then the delivery time is extended by the duration of the hindrance plus an appropriate starting up period. Transportation breakdowns, plant breakdowns, delays in the delivery of raw materials, strikes, legal lockouts and other labour conflicts together with all other unforeseeable, extraordinary circumstances which are not our fault shall be treated like Acts of God. If, as a result of Act(s) of God or the circumstances to be treated as such according to sentence 2, delivery or performance becomes impossible or materially more difficult and the impediment is not

Chief Executives: Dipl.-Kfm. Michael Hecker, Dipl.-Ing. Andreas Wilbrand, registration court: Wiesbaden HRB 6286, registered office of the company: Biebricher Straße 74 · 65203 Wiesbaden, Germany postal address: Postfach 42 01 52 · 65102 Wiesbaden, Germany fon +49 6 11 17 07-0 · fax +49 6 11 17 07-2 50 bank details: UniCredit Bank AG · IBAN: DE80 5032 0191 0605 8367 71 BIC: HYVEDEMM430, VAT identification number DE 811134627

245

Sopro Bauchemie GmbH, Wiesbaden

246

Sopro International

1 Germany

Sopro Bauchemie GmbH Wiesbaden

2 Austria

Sopro Bauchemie GmbH, Austria Asten

3 Poland

Sopro Polska Sp. z o.o. Warsaw

4 Switzerland

Sopro Bauchemie GmbH Branch office Thun

5 Hungary

Sopro Hungรกria Kft. Budakeszi

6 The

Netherlands Sopro Nederland B.V. Nieuwegein

247

Sustainability Sustainable Sustainability – always understood as the simultaneous pursuit, with equal priority, of environmental, social and economic goals – is a cornerstone of Sopro Bauchemie‘s corporate philosophy. Key planks of its policy include eco-friendly, resource-saving production and the development of low-emission products and solutions. This, in turn, demands efficient, economical processes along the entire added value chain. As a member of the German Sustainable Building Council (DGNB), Sopro Bauchemie is committed to the above principles. Many Sopro products are an ideal choice for projects seeking DGNB (German Sustainable Building Council) certification. The product ratings – in terms of “quality level” – are based on the DGNB criterion “ENV1.2 Local Environmental Impact” (as at 31.07.2013), with quality level 4 representing the highest standard. Each product, depending on its type, is allocated to a “line” in the relevant criteria matrix (Annex 1 of aforementioned DGNB criterion). In addition, many Sopro products have already been provided with their own sustainability data sheets (NDB and EPD). This allows customers to immediately identify the particular national or international building certification system for which individual Sopro products can be used. Yet, sustainable building certification is also gaining increasing importance across the entire construction products market. Through the “Healthy Living and Energy Conservation with Ceramics“ initiatives launched by the EUF (Federation of European Tile Fixers‘ Associations), the ceramics industry and builders’ merchants are stepping up their efforts and sharpening their profile with regard to sustainability issues. These offer a key potential source of future growth. As an EUF partner, Sopro Bauchemie is actively involved in this process. Alongside its membership of the “Umweltallianz Hessen“ (“Hessian Environmental Alliance“), Sopro has also signed the “100 Companies for Environmental Protection“ charter initiated in 2009 by the German Federal State of Hesse. In doing so, it has pledged, among other things, to help reduce the emission of climate-relevant greenhouse gases and actively engage in climate protection.

Low-emission Our commitment to sustainable, ecological construction practice is underlined by high-grade, low-emission products and our involvement in various projects. The formulation of our products is the most obvious starting point for eco-friendly action: preference is given to raw materials that significantly reduce or completely eliminate emissions or pollution that pose a risk to human beings and the environment. Emission levels are indicated by the EMICODE® rating, based on the GEV e.V. (German Association for Control of Emissions in Products for Flooring Installation) classification. The EMICODE® logo certifies that the emissions from the tested products pose no risks after application. Sopro‘s customers are able to perform all operations necessary for successful tilelaying – from priming, waterproofing, substrate levelling, separation and insulation, to tile fixing and grouting – using certified, low-emission products. We also have a wide range of our products checked by the MINERGIE-ECO® certification body to verify their suitability for projects seeking Swiss building certification. These products include Sopro’s No.1 flexible tile adhesive, Sopro FF 450 flexible tile adhesive, Sopro DF 10® flexible designer tile grout, Sopro FS 15® plus floor-levelling compound and Sopro GD 749 primer. Moreover, some products (e. g. Sopro FKM 444 XL, Sopro VF XL 413 and Sopro VF HF 420 tile adhesives) benefit from a low-dust formulation. In other words, the amount of dust generated by opening and preparing the material is far lower than for standard Sopro thin-bed adhesives. This helps to maintain a healthy environment both for applicators and for later occupants.

248

seh

Environmentally compatible issio n

Sopro Bauchemie has, on its own initiative, undertaken to provide ecologically sound products and solutions, backed up by efficient, economical processes. That eco-friendliness, economic viability and efficiency are by no means mutually exclusive is triumphantly demonstrated by our measures under the ÖKOPROFIT® initiative launched by the city of Wiesbaden.

Quality management

ÉMISSIONS DANS L’AIR INTÉRIEUR*

A+

A+ A B

Sopro Bauchemie has already picked up a string of “ÖKOPROFIT® company“ awards. The parti cipants in this scheme to promote integrated environmental technology, launched in over 80 German municipalities and administrative districts, take action to reduce the burden on the environment while at the same time cutting costs. For years now, Sopro Bauchemie in Wiesbaden has embraced a host of measures that compellingly demonstrate how economic profit can be generated without in any way compromising the natural environment or future generations. On the contrary, ecological initiatives and the sparing use of limited resources can even pave the way for cost savings. The programmes introduced in many different parts of the company have achieved significant reductions in the volume of waste produced, together with appreciable cuts in energy, water and fuel consumption – all of which have translated into considerable savings.

Holistically healthy living environments In recent years, attention and demand have increasingly focused on healthier buildings for living, working and learning. This trend has been compounded by statutory energy efficiency and indoor environmental hygiene requirements. As a market pioneer, Sopro Bauchemie wholeheartedly supports these forward-looking developments. The recently initiated collaboration with Sentinel Haus Institut underlines the company‘s commitment to its role as provider in the field of sustainable and ecological construction. The Sopro product listings in the institute‘s „Healthier Buildings Product Directory“ („Bauverzeichnis Gesündere Gebäude“) now offer Sopro customers easy access to its full range of healthy living products – from primers, waterproof membranes and separating/insulation board to tile adhesives and grouts. Here, all products with the sustainable label fully deserve this title in that they meet stringent requirements in terms of both product quality (e.g. low-emission properties) and product information (content and intelligibility). As a partner in the Healthier Buildings Product Directory, Sopro Bauchemie supplies transparent, soundly based information for product assessment. Sentinel Haus Institut draws on recognized systems and labels, such as the EMICODE® emission control ratings, sustainability reports and other standard certifications. To guarantee supreme standards in all matters relating to technical services – e.g. construction product testing, indoor air measurements, training courses and company/personal certification – Sentinel Haus Institut works with TÜV Rheinland (Rhineland Association for Technical Inspection), a world-leading service provider in testing and professional development. The Healthier Buildings Product Directory is, however, more than just a database and product list. As a multi-functional platform, it conveniently unites all different areas and interest groups: construction products, tradesmen, experts and investors, together with their certified „healthier buildings“. This provides both project team members and users with the clearest possible picture. In its role as consultant, Sentinel Haus Institut offers wide-ranging, up-to-date expertise and market intelligence, both in the German-speaking world and beyond, on indoor environmental health for all types of building. The Healthier Buildings Product Directory is set apart from everything else on the market and will continue to gain significance for future projects. The partnership between Sentinel Haus Institut and Sopro Bauchemie offers all players in the property development, refurbishment and maintenance value chain a unique, scientifically based and market-relevant pool of know-how and experience covering the entire field of health protection and indoor comfort.

Uniform quality – nationally and internationally. Quality management – as a dynamic process rather than a set of static routines – represents a cornerstone in Sopro Bauchemie GmbH‘s corporate philosophy. Our QM strategy is not exclusively geared to individual sites or temporally limited procedures, but aims at delivering uniform quality standards throughout the company network. Today and in the future. Targeting the whole framework of processes and routines, this integral approach requires the active involvement of the entire workforce. Apart from the regular optimization of company procedures, it calls for the continuous monitoring and review of corporate policy and action. The „from problem-faced to problem-solved” PDCA cycle at the heart of our QM systems clearly underlines our dynamic approach. Indication of volatile organic compound (VOC) emission level in indoor air posing a health risk through inhalation, broken down into classes A+ (very-low-emission), A and B down to Class C (high-emission).

249

Sopro Bauchemie GmbH has been certified to DIN EN ISO 9001 since 1994. The matrix certification obtained for QM in 2006 also embraced subsidiaries Sopro Bauchemie GmbH Austria and Sopro Polska Sp. Z o.o. With the future integration of further companies in this quality matrix high on the agenda, we shall continue to provide you, our clients, with a c onsistently high product and service quality.

ETA

DANMARK

“Authorised Economic Operator” (AEO) Sopro Bauchemie GmbH has been granted the status of “Authorised Economic Operator” (AEO), which certifies its credentials as a reliable partner in the international supply chain, from manufacturer to end user. In Germany, AEO status is granted, upon application, by the competent main customs office (“Hauptzollamt”) and has unlimited validity in all member states. The award of AEO status is subject to a thorough, wide-ranging system of checks in respect of reliability, solvency, compliance with legal regulations, and fulfilment of predefined security and safety standards. Companies with AEO status are deemed particularly reliable and trustworthy. Sopro Bauchemie has been awarded the most extensive accreditation – the “Authorised Economic Operator Full” (AEOF) certificate for “Customs Simplification/Security & Safety”. In 2014, Sopro additionally obtained energy management certification to DIN EN ISO 50 001, thereby sealing its commitment to efficient and sustainable energy use. Our aim is to achieve a continuous optimization of energy consumption. Quality documented by external test certificates Clients can rest assured that Sopro‘s innovative products and perfectly co-ordinated product systems will always remain at the cutting edge of technology while continuing to meet the most stringent requirements. This is guaranteed by a rigorous regime of quality checks and in-house controls and confirmed by external test certificates issued by recognized institutes such as the SFV e. V. institute for wall/floor coverings in Großburgwedel or the Technische Universität München. These certificates, for instance, attest conformity with the “C” and “S” ratings specified in the European thin-bed adhesive standards, with the Flexmortar quality label for flexible tile adhesives and with the “CG” classes defined in the European tile grout standard. They all serve to underline both the impeccable standard of our products and their exceptional ease of application

Sopro‘s No.1, our S1-grade flexible tile adhesive, for example, boasts numerous test c ertificates issued by various external institutes: Technische Universität München: C2 TE S1 to DIN EN 12 004. National test certificate (abP) for use in conjunction with Sopro DSF 423, Sopro DSF 523, Sopro DSF 623, Sopro TDS 823, Sopro GD 749 and other Sopro system components. National test certificate (abP) for use in conjunction with Sopro PU-FD 570/571, Sopro EPG 522 and other Sopro system components European technical approval: – System component of ETA no. 13/0155 under ETAG 022 Part 1 and of ETA no. 13/0154 under ETAG 022 Part 2 SFV e.V. institute for wall/floor coverings, Großburgwedel: General building control test certificate (abP) for use in conjunction with Sopro FDF 525/527, Sopro GD 749 and other Sopro system components Materials Testing Institute (MPA), Braunschweig: General building control test certificate (abP) pursuant to system test for waterproof sheet membranes applied in conjunction with tile coverings: combinations featuring S opro AEB 640®, Sopro AEB 641, Sopro AEB 642/643 and Sopro AEB 644/645 with Sopro‘s No. 1, Sopro‘s No. 1 rapid-set and Sopro FKM XL 444 as tile adhesive and Sopro Racofix® universal adhesive or Sopro TDS 823 as adhesive and sealing product at laps. Textiles & Flooring Institute (TFI) GmbH, Aachen: Low-emission under GEV EMICODE system Materials Test Institute Dresden: Fire classification to DIN EN 13 501-1: A1/A1fl.

250

European standards for tile adhesives – DIN EN 12004 Adhesive products used for laying ceramic tiles are required to meet various performance standards. These are precisely defined in European standard DIN EN 12004 (or ISO 13 007 Part 1), which specifies the criteria for the C1 and C2 ratings (for cementitious adhesives), D1 and D2 ratings (for dispersion adhesives) and R1 and R2 (for reaction resin adhesives) along with extra optional parameters. Standard DIN EN 12004 sets out the background to the S1 and S2 ratings for cementitious adhesives. The various performance criteria are described in detail in the following sections.

Cementitious adhesives Tensile adhesion strength: The C1 and C2 ratings (specified in DIN EN 12004) relate to tensile adhesion performance. The Class C1 criteria represent the minimum requirements (min. 0.5 N/mm²) for all cementitious tile adhesives. The performance standards specified for Class C2 are appreciably higher, with a minimum tensile adhesion strength of 1 N/mm² required of thin-bed adhesives. Tensile adhesion tests for the C1 and C2 ratings are performed for four different storage conditions. For rapid setting tile adhersiver, an early tensile adhesion strength of 0,5N/mm2 is requested after 6 hours.

Class C1

Class C2

Tensile adhesion strength after dry storage

≥ 0.5 N/mm²

≥ 1 N/mm²

Tensile adhesion strength after water storage

≥ 0.5 N/mm²

≥ 1 N/mm²

Tensile adhesion strength after heat storage

≥ 0.5 N/mm²

≥ 1 N/mm²

Tensile adhesion strength after freeze-thaw storage

≥ 0.5 N/mm²

≥ 1 N/mm²

Deformability: The deformability of hardened, cementitious thin-bed adhesives is tested using a predefined specimen (strip of material) and rated as S1 or S2 (to DIN EN 12004). While the S1 rating requires a deformability between min. 2.5 mm and 5 mm, Class S2 is reserved for highly deformable products achieving a minimum value of 5 mm – a requirement twice that specified by the German Flexmortar guidelines.

Dispersion adhesives The D1 and D2 ratings (specified in DIN EN 12004) relate to shear strength. All dispersion adhesives are required to meet at least Class D1 requirements, i. e. by exhibiting min. 1 N/mm² shear strength after dry and heat storage. The D2 rating additionally requires a minimum shear strength of 0.5 N/mm² after water storage together with a shear strength ≥ 1 N/mm² at elevated temperatures.

Reaction resin adhesives Like the D1 and D2 ratings for dispersion adhesives, Classes R1 and R2 for reaction resin adhesives (specified in DIN EN 12 004) relate to shear strength. All reaction resin adhesives are required to meet at least Class R1 requirements, i. e. by exhibiting min. 2 N/mm² shear strength after dry and water storage. The R2 rating additionally requires a minimum shear strength of 2 N/mm² after temperature cycles.

Application properties Extra letters, e. g. T, E and F, may be added to the rating code to indicate supplementary application properties.

thixotrophic/high sag resistance

extended open time (only applicable to cementitious and Class D2 dispersion adhesives)

fast setting (only applicable to cementitious adhesives C1/C2)

ted to es

Cementitious adhesive with a tensile adhersion strength of more than 1 N/mm2

C2 TE S1

• Additionally with low sag of max. 0.5 mm • Additionally with extended open time (tensile adhesion strength ≥ 0.5 N/mm² after min. 30 minutes installation time)

E N 12 0

Deformability ≥ 2.5 mm

251

European standards for tile adhesives – DIN EN 12004 Potential combinations T

• Additionally with low sag of max. 0.5 mm

• Additionally with extended open time (tensile adhesion strength ≥ 0.5 N/mm² after min. 30 minutes installation time)

• Additionally with low sag of max. 0.5 mm • Additionally with extended open time (tensile adhesion strength ≥ 0.5 N/mm² after min. 30 minutes installation time)

• Additionally with early tensile adhesion strength after dry storage and after max. 6 h ≥ 0.5 N/mm² • Additionally with shorter open time (tensile adhesion strength ≥ 0.5 N/mm² after min. 10 minutes installation time)

• Additionally with extended open time (tensile adhesion strength ≥ 0.5 N/mm² after min. 30 minutes installation time) • Additionally with early tensile adhesion strength after dry storage and after max. 6 h ≥ 0.5 N/mm²

FTE

• Additionally with early tensile adhesion strength after dry storage and after max. 6 h ≥ 0.5 N/mm² • Additionally with low sag of max. 0.5 mm • Additionally with extended open time (tensile adhesion strength ≥ 0.5 N/mm² after min. 30 minutes installation time)

German Flexmortar guidelines

Flexmortar Complies with the German Flexmortar regulations June 2001

The Flexmortar guidelines specify national requirements for flexible, one-component adhesives. These guidelines are not effective at European level. The minimum requirements for flexible tile adhesives correspond to European Class C2 and additionally stipulate a minimum deformability of 2.5 mm, although this provision – in respect of key test criteria – fails to match the much stiffer test procedures of the current DIN EN 12004, which places far stricter demands on the condition of test specimens. Hence, any flexible, one-component thin-bed adhesive classed C2/S1 to European standards DIN EN 12004 automatically meets the requirements of the German Flexmortar guidelines. Indeed, the C2/S1 rating exceeds the demands of the Flexmortar guidelines with regard to deformability and thus flexibility – a particularly vital property. As a result, the adhesive performance implied by the C2/S1 rating is currently superior to that signalled by the (lozenge-shaped) Flexmortar quality label alone.

CE marking The CE mark is affixed by manufacturers solely to confirm the conformity of their products with the relevant European standards. CE marking has been mandatory for tile adhesives since 1.04.2004 and serves as a kind of „product passport” to permit the free movement of goods within Europe. The minimum requirement is a Class C1 rating to EN 12004. Award of the CE mark is subject to initial type testing by a recognized institute, which confirms compliance of the product‘s properties with the requirements of the relevant European standards. Each CE mark indicates the relevant manufacturer together with the performance data for the four storage conditions. Sopro‘s tile adhesives all meet the minimum requirements, without exception.

Note! Tile adhesives may bear the CE mark even if they fail to meet the minimum C1 requirement for all four storage conditions. In such cases, however, the minimum requirement may only be waived for heat and freeze-thaw storage. Tile adhesives displaying a CE mark subject to these exceptions must not be used outdoors. Such tile adhesives may be recognized by the designations NPD (no performance determined) or by performance data stated in the CE label that fail to meet the C rating requirements.

Sopro Bauchemie GmbH 1211 0767

Biebricher Straße 74 – 65203 Wiesbaden (Germany) www.sopro.com 04 CPR-DE3/0400.1.eng EN 12 004:2007 + A1:2012 Sopro’s No.1 400 Improved cementitious adhesive for indoor and outdoor wall and floor tiling

Reaction to fire

Class A1/A1fl.

Bond strength as: Initial tensile adhesion strength

≥ 1.0 N/mm2

Durability for: Tensile adhesion strength after water immersion Tensile adhesion strength after heat ageing Tensile adhesion strength after freeze-thaw cycles

≥ 1.0 N/mm2 ≥ 1.0 N/mm2 ≥ 1.0 N/mm2

Release of dangerous substances

252

See SDS

European standards for tile grouts – DIN EN 13888 Tile grouts used for finishing ceramic tiling are required to meet various performance standards. These are precisely defined in European standard DIN EN 13 888 (or ISO 13007 Part 3), which specifies the criteria for the CG1 and CG2 ratings (for cementitious tile grouts) and the RG rating (for reaction resin tile grouts)

CG classiﬁcation to DIN EN 13888 Merely to achieve a CG1 rating, tile grouts are required to meet criteria for eight different test parameters:

CG1 Abrasion resistance

≤ 2000 mm³

Bending strength after dry storage

≥ 2.5 N/mm²

Bending strength after freeze-thaw storage

≥ 2.5 N/mm²

Compressive strength after dry storage

≥ 15 N/mm²

Compressive strength after freeze-thaw storage

≥ 15 N/mm²

Shrinkage

≤ 3 mm/m

Water absorption after 30 minutes

≤5g

Water absorption after 240 minutes

≤ 10 g

CG2 W, CG2 A and CG2 WA (in addition to CG 1) Extra-high abrasion resistance ( = A)

≤ 1000 mm³

Reduced water absorption after 30 minutes ( = W)

≤2g

Reduced water absorption after 240 minutes ( = W)

≤5g

Bending strength after dry storage ≥ 2.5 N/mm²

Reduced water absorption

Compressive strength after freezethaw storage ≥ 15 N/mm²

Extra-high abraision resistance

CG2 WA DI

Compressive strength after dry storage ≥ 15 N/mm²

ted to

s Te

Bending strength after freezethaw storage ≥ 2.5 N/mm²

Shrinkage ≤ 3 mm/m

E N 13 8

Extra-high abrasion resistance ( = A) ≤ 1000 mm³

Reduced water absorption after 30 minutes ( = W) ≤ 2 g

Reduced water absorption after 240 minutes ( = W) ≤ 5 g

RG classiﬁcation to DIN EN 13888 The RG rating applies to reaction resin tile grouts and imposes similarly stringent requirements on the relevant materials: Abrasion resistance

≤ 250 mm³

Bending strength after dry storage

≥ 30 N/mm²

Compressive strength after dry storage

≥ 45 N/mm²

Shrinkage

≤ 1.5 mm/m

Water absorption after 240 minutes

≤ 0.1 g

253

European standards for screeds – DIN EN 13813 Screed mortars are subject to specific performance requirements. These are precisely defined in European standard DIN EN 13813, which, among other things, contains a classification by screed binder type, compressive strength (C), flexural tensile strength (F) and Böhme abrasion resistance (A).

Screed classiﬁcation to DIN EN 13813 (January 2003) DIN EN 13 813 International abbreviations for screed binders Cementitious screed

CT Cementitious screed

Calcium sulphate (anhydrite) screed

CA Calcium sulfate screed

Synthetic resin screed

SR Synthetic resin screed

Magnesite (magnesium oxychloride) screed

MA Magnesite screed

Mastic asphalt screed

AS Mastic asphalt screed

Cementitious screed

ted to es

Flexural tensile strength class ≥ 7 N/mm²

DI N

Compressive strength class ≥ 50 N/mm²

CT-C50-F7-A12 Abrasion resistance class ≤ 12 cm³/50 cm²

E N 13 8

Compressive strength classes (C) for screed mortars Class in N/mm²

C12

C16

C20

C25

C30

C35

C40

C50

C60

C70

C80

Flexural tensile strength classes (F) for screed mortars Class

F10

F15

F20

F30

F40

F50

in N/mm²

Böhme abrasion resistance classes (A) for cementitious and other screed mortars Class Abrasion volume in cm³/50 cm²

A22

A15

A12

A1,5

1,5

Cementitious screed groups to TKB data sheet 14 1) On the basis of their composition and properties, cementitious screeds can be divided into four groups:

Group

Properties

Rapid-hardening cementitious screeds with ternary binder system (SZT)

Three-part mix (Portland/normal cement, high-alumina cement, calcium sulphate), high crystalline water binding capacity, rapid hardening, rapid drying, low shrinkage

Rapid-hardening cementitious screeds with binary binder system (SZB)

Two-part mix (Portland/normal cement, high-alumina cement), crystalline water binding, rapid hardening

Normal cementitious screeds with screed admixtures (EZM)

Reduced water content, improved workability

Normal cementitious screeds

Difficult workability, long drying time

Classification in accordance with TKB (German Technical Committee for Construction Adhesives) data sheet 14 “Rapid-hardening cementitious screeds and cementitious screeds with screed admixtures” issued on 11 August 2015 by Industrieverband Klebstoffe e.V. (German Adhesives Industry Association).

254

Sopro shipbuilding systems Sopro shipbuilding systems These comprise a variety of products and product systems that have been approved for shipbuilding applications. The products and product systems have been issued EC-type examination certificates (under the Marine Equipment Directive 2014/90/EU) by the Ship Safety Division of BG Verkehr = Berufsgenossenschaft Verkehrswirtschaft Post-Logistik Telekommunikation. The products have also been assigned a U.S. Coast Guard (USCG) approval number, by means of which the international applicability of the products on ships can be certified.

Schiffba Systeume

Sopro MultiFlexkleber eXtra Light FKM XL 444

0736/2018

MED-No. Part of * MED-No. 118.222 118.405 124.096 124.126 124.125

118.220

U.S. Coast Guard No. 164.112/EC0736/118.222 164.112/EC0736/118.405 164.117/EC0736/124.096 164.117/EC0736/124.126 164.117/EC0736/124.125

Sopro System 2.1 2.5 3.1 3.7 3.9

Geprüfte

Sopro Pro

dukte un

d Produ

ktsystem

* The wheel-mark refers to the Sopro systems 2.1 (wall), 2.5 (wall), 3.1 (floor), 3.7 (floor), 3.9 (floor) – of which Sopro FKM XL 444 is part of – applied according to TDS

www.

sopro.co

Wall and floor coverings MED 1)approval no.

USCGapproval no.

Subject

1.1 Sopro FKM® XL 444

118.220

A.1/3.18 e

1.2 Sopro‘s No. 1 white rapid-set

118.221

A.1/3.18 e

1.3 Sopro TF plus (grout/all colours)

118.404 (Walls)

164.112/EC0736/ 118.404 (Walls)

A.1/3.18 a

124.124 (Floors)

164.117/EC0736/ 124.124 (Floors)

A.1/3.18 c

(order no 997)

1.4 Sopro FKM® Silver

118.432

1.5 Sopro DF 10®

118.433 (Walls)

164.112/EC0736/ 118.433 (Walls)

MED/3.18 a

124.137 (Floors)

164.117/EC0736/ 124.137 (Floors)

MED/3.18 c

MED/3.18 e

Marine Equipment Directive

255

Sopro shipbuilding systems Product system

2.1 a) Sopro HPS 673 (primer)

MED 1)approval no.

USCGapproval no.

Subject

118.222

164.112/EC0736/ 118.222

A.1/3.18 a

118.223

164.112/EC0736/ 118.223

A.1/3.18 a

118.224

164.112/EC0736/ 118.224

A.1/3.18 a

118.316

164.112/EC0736/ 118.316

MED/3.18 a

118.405

164.112/EC0736/ 118.405

MED/3.18 a

118.406

164.112/EC0736/ 118.406

MED/3.18 a

b) Sopro FKM® XL 444 c) Fully vitrified stoneware tile d) Sopro FEP (grout/all colours)

2.2 a) Sopro DSF 423 (waterpr. membrane) b) Sopro‘s No. 1 white rapid-set (order no 997) c) Fully vitrified stoneware tile d) Sopro FEP (grout/all colours)

2.3 a) Sopro PUK 503 (adhesive) b) Fully vitrified stoneware tile c) Sopro Brillant® (grout/all colours)

2.4 a) Sopro EPG 522 b) Sopro QS 507 c) Sopro PU-FD 570 d) Sopro QS 511 e) Sopro´s No. 1 400 (adhesive) f) Fully vitrified stoneware tile g) Sopro TFb (grout/all colours)

2.5 a) Sopro HPS 673 (primer) b) Sopro FKM® XL 444 c) Fully vitrified stoneware tile d) Sopro FEP plus (grout/all colours)

2.6 a) Sopro DSF 423 (waterpr. membrane) b) Sopro‘s No. 1 white rapid-set (order no 997) c) Fully vitrified stoneware tile d) Sopro FEP plus (grout/all colours)

256

Sopro shipbuilding systems Floor coverings MED 1)approval no.

USCGapproval no.

Subject

124.096

164.117/EC0736/ 124.096

A.1/3.18 c

124.097

164.117/EC0736/ 124.097

A.1/3.18 c

124.099

164.117/EC0736/ 124.099

A.1/3.18 c

3.5 Sopro FAS 551 (filler)

124.095

164.117/EC0736/ 124.095

A.1/3.18 c

3.6 a) Sopro EPG 522

124.115

164.117/ EC0736/124.115

MED/3.18 c

124.126

164.117/EC0736/ 124.126

MED/3.18 c

124.127

164.117/EC0736/ 124.127

MED/3.18 c

124.125

164.117/EC0736/ 124.125

A.1/3.18 c

3.1 a) Sopro HPS 673 (primer) b) Sopro FKM® XL 444 (adhesive) c) Fully vitrified stoneware tile d) Sopro FEP (grout/all colours)

3.2 a) Sopro DSF 423 (waterpr. membrane) b) Sopro‘s No. 1 white rapid-set (order no 997) c) Fully vitrified stoneware tile d) Sopro FEP (grout/all colours)

3.4 a) Sopro PUK 503 (adhesive) b) Fully vitrified stoneware tile c) Sopro Brillant® (grout/all colours)

b) Sopro QS 507 c) Sopro PU-FD 571 d) Sopro QS 511 e) Sopro´s No. 1 400 (adhesive) f) Fully vitrified stoneware tile g) Sopro TFb (grout/all colours)

3.7 a) Sopro HPS 673 (primer) b) Sopro FKM® XL 444 (adhesive) c) Fully vitrified stoneware tile d) Sopro FEP plus (grout/all colours)

3.8 a) Sopro DSF 423 (waterpr. membrane) b) Sopro‘s No. 1 white rapid-set (order no 997) c) Fully vitrified stoneware tile d) Sopro FEP plus (grout/all colours)

3.9 a) Sopro HPS 673 (primer) b) Sopro FAS 551 (filler) c) Sopro FKM® XL 444 (adhesive) d) Fully vitrified stoneware tile e) Sopro TF plus (grout/all colours)

Sopro shipbuilding system no. 3.3 has been replaced by system no. 3.9.

257

Notes

258

Notes

259

Notes

260

Sopro grouting colours

transparent 00

translucent

14 15 17

white 10 1

light grey 16

9 11 13 14 15

9 10 11 12 13

5 14 15 16 17

16 17

silver grey 17 1

manhattan 77 9 11 13 14

15 16 17

pavement grey 13 19 20 21 22 24

14 15 16 17 18 22 23 24

sandgrey 18 1

grey 15 4

3 14 15

8 14 15 16 17 22

sand 36

stonegrey 22

19 20 21

concrete grey 14

8 11 14 15 16 17

9 10 14

15 16 17

basalt 64 1

8 14 15 17

anthracite 66 1

parchment 27

black 90

9 11 13 14 15

9 11 14 15 17

3 14 15

16 17 19 20 22 24

jasmin 28 1

4 14 15

anemone 35

brown 52 2

4 11 14 15

ebony 62 1 14 15

4 14 15 17

jurabeige 33 1

3 14

light beige 29

beige 32 1

bahama beige 34 1

8 14 15 17 22

1 14

1 15

bali brown 59

1 14 15

deep blue 98

signal red 91

1 14

4 14 15

1 14 15

mahogany 55

chestnut 50

sahara 40

caramel 38

8 11 14 15 17

4 11 14 15

wine red 92

1 14

Caption 1

Sopro DF 10速

Sopro Sopro Titec+

Marble Silicone

Sopro FL plus

Sopro TFb

SoproDur速 HF-D

Sopro Saphir速 5

Sopro FEP

Sopro PF 1-K

Sopro Brillant速

Sopro FEP special

Sopro EPF 2-K

Sopro MFs

FugenEpoxi/Sopro FUF

Sopro HFE

Sopro MFs+b

Sanitary Silicone

Sopro TNF

Sopro MFb

Ceramic Silicone

Sopro BSF

Sopro FL

Ceramic Silicone S

Sopro PFM

For technical reasons, the colours shown here may diverge from those of the fully cured material.

International Business Sopro Bauchemie GmbH Postfach 42 01 52 D-65102 Wiesbaden Fon +49 6 11 17 07-239 Fax +49 6 11 17 07-240 Mail international@sopro.com

Switzerland

Poland

Sopro Bauchemie GmbH Zweigniederlassung Schweiz Bierigutstrasse 2 CH-3608 Thun Fon +41 33 3340040 Fax +41 33 3340041

Sopro Polska Sp. z.o.o. ul. Polecki 23 F PL-02822 Warszawa Fon +48 223 352 300 Fax +48 223 352 309

Mail info_ch@sopro.com

Mail biuro@sopro.pl

Austria

Hungary

Sopro Bauchemie GmbH Lagerstraße 7 A-4481 Asten Fon +43 7224 67141-0 Fax +43 7224 67181

Sopro Hungária Kft. Bianka utca 14 H-2092 Budakeszi Fon +36 23 458 045 Fax +36 23 458048

Mail marketing@sopro.at

Mail info@sopro.hu

Netherlands Sopro Nederland B. V. Kruyderlaan 21 A NL-3431 BM Nieuwegein Fon +31 3 06 05 02 14 Fax +31 3 06 05 08 96 Mail info@soprobv.nl

www.sopro.com

PE 1/03.18/03.18 · Subject to change without notice. Please observe the current version of the product informations on www.sopro.com

Subsidiaries