www.CertifySchool.com Certification Preparation Material (PDF)
Microsoft 70-410 Exam Installing and Configuring Windows Server 2012
Edition = DEMO Full Version Features: 90 Days Free Updates 30 Days Money Back Guarantee Instant Download Once Purchased 24 Hours Live Chat Support
Demo Product – For More Information – Visit link below:
http://www.certifyschool.com/exam/70-410/
http://www.certifyschool.com/exam/70-410/
Page | 1
www.CertifySchool.com Certification Preparation Material (PDF) Question: 1 DRAG DROP Your network contains three servers. The servers are configured as shown in the following table.
Your company plans to standardize all of the servers on Windows Server 2012 R2. You need to recommend an upgrade path for each server. The solution must meet the following requirements: Upgrade the existing operating system whenever possible. Minimize hardware purchases. Which upgrade path should you recommend for each server? To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used once, more than once, or not at all.
Answer:
Explanation: Upgrade paths for Windows Server 2012 R2 are limited. In fact, it’s easier to specify when you can perform an upgrade than when you can’t. If you have a 64-bit computer running Windows Server 2008 or Windows Server 2008 R2, then you can upgrade it to Windows Server 2012 R2 as long as you use the same operating system edition. Windows Server 2012 R2 does not support the following: - Upgrades from Windows Server versions prior to Windows Server 2008 - Upgrades from pre-RTM editions of Windows Server 2012 R2 - Upgrades from Windows workstation operating systems - Cross-platform upgrades, such as 32-bit Windows Server 2008 to 64-bit Windows Server 2012
http://www.certifyschool.com/exam/70-410/
Page | 2
www.CertifySchool.com Certification Preparation Material (PDF) - Upgrades from any Itanium edition - Cross-language upgrades, such as from Windows Server 2008, U.S. English to Windows Server 2012, French In any of these cases, the Windows Setup program will not permit the upgrade to proceed. References: http://technet.microsoft.com/en-us/library/jj134246.aspx
Question: 2 You have a server named Server1 that runs Windows Server 2012 R2. You plan to create an image of Server1. You need to remove the source files for all server roles that are not installed on Server1. Which tool should you use? A. servermanagercmd.exe B. imagex.exe C. dism.exe D. ocsetup.exe
Answer: C Explanation: The Dism utility can be used to create and mount an image of Server1. Incorrect answers: A: This is the wrong tool. B. The imagex.exe command is used to create windows and to apply image to drive. D: The ocsetup command will execute a setup. References: http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22
Question: 3 A network technician installs Windows Server 2012 R2 Standard on a server named Server1. A corporate policy states that all servers must run Windows Server 2012 R2 Enterprise. You need to ensure that Server1 complies with the corporate policy. You want to achieve this goal by using the minimum amount of administrative effort. What should you perform? A. A clean installation of Windows Server 2012 R2 B. An upgrade installation of Windows Server 2012 R2 C. Online servicing by using Dism D. Offline servicing by using Dism
Answer: C Explanation: There are a couple of ways to install the GUI from the command prompt, although both use the same tool – DISM (Deployment Image Service Manager). When you are doing it for a single (local) server, the command is:
http://www.certifyschool.com/exam/70-410/
Page | 3
www.CertifySchool.com Certification Preparation Material (PDF) Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:‌ Incorrect answers: A: This option involves too much administrative effort whereas you could just use a DISM command once. B: This should work, but not with the east amount of administrative effort. D: The DISM utility needs to be used online, not offline. References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22
Question: 4 HOTSPOT You have a Server Core 2012 installation and all roles and features removed. The server does not have access to Windows Update. You mount the network volume containing the installation files for Server 2012. You need to install DNS and DHCP server role. Which directory do you reference for installing?
Answer:
http://www.certifyschool.com/exam/70-410/
Page | 4
www.CertifySchool.com Certification Preparation Material (PDF)
Explanation: WinSxS, the side-by-side component store enables administrators to activate any of the features included with Windows Server 2012 R2 without having to supply an installation medium. References: http://blogs.technet.com/b/askpfeplat/archive/2013/02/24/how-to-reduce-the-size-of-the-winsxs-directoryandfree-up-disk-space-on-windows-server-2012-using-features-on-demand.aspx Exam Ref 70-410: Installing and configuring Windows Server 2012 R2, Chapter 1: Installing and configuring servers, Objective 1.1: Install servers, p. 10
Question: 5 HOTSPOT Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller named DC1. When you run ping dc1.corp.contoso.com, you receive the result as shown in the exhibit. (Click the Exhibit button.)
http://www.certifyschool.com/exam/70-410/
Page | 5
www.CertifySchool.com Certification Preparation Material (PDF)
You need to ensure that DC1 can respond to the Ping command. Which rule should you modify? To answer, select the appropriate rule in the answer area.
Answer:
Explanation: ICMP should have been enabled when ADDS was installed References: http://social.technet.microsoft.com/wiki/contents/articles/16566.windows-active-directory-role-forwindowsservers.aspx
Question: 6 http://www.certifyschool.com/exam/70-410/
Page | 6
www.CertifySchool.com Certification Preparation Material (PDF) HOTSPOT You have a server named DHCP1 that runs Windows Server 2012 R2. DHCP1 does not have access to the Internet. All roles are removed completely from DHCP1. You mount a Windows Server 2012 R2 installation image to the C:\Mount folder. You need to install the DHCP Server server role on DHCP1 by using Server Manager. Which folder should you specify as the alternate path for the source files? To answer, select the appropriate folder in the answer area.
Answer:
http://www.certifyschool.com/exam/70-410/
Page | 7
www.CertifySchool.com Certification Preparation Material (PDF)
Explanation: WinSxS, the side-by-side component store enables administrators to activate any of the features included with Windows Server 2012 R2 without having to supply an installation medium. References: http://blogs.technet.com/b/askpfeplat/archive/2013/02/24/how-to-reduce-the-size-of-the-winsxs-directoryandfree-up-disk-space-on-windows-server-2012-using-features-on-demand.aspx Exam Ref 70-410: Installing and configuring Windows Server 2012 R2, Chapter 1: Installing and configuring servers, Objective 1.1: Install servers, p. 10
Question: 7 DRAG DROP Your network contains three servers. The servers are configured as shown in the following table.
Your company plans to standardize all of the servers on Windows Server 8. You need to recommend an upgrade path for each server. The solution must meet the following requirements:
http://www.certifyschool.com/exam/70-410/
Page | 8
www.CertifySchool.com Certification Preparation Material (PDF) • Upgrade the existing operating system whenever possible. • Minimize hardware purchases. Which upgrade path should you recommend for each server? To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used once, more than once, or not at all.
Answer:
Explanation: Upgrade paths for Windows Server 2012 R2 are limited. In fact, it’s easier to specify when you can perform an upgrade than when you can’t. If you have a 64-bit computer running Windows Server 2008 or Windows Server 2008 R2, then you can upgrade it to Windows Server 2012 R2 as long as you use the same operating system edition. Windows Server 2012 R2 does not support the following: - Upgrades from Windows Server versions prior to Windows Server 2008 - Upgrades from pre-RTM editions of Windows Server 2012 R2 - Upgrades from Windows workstation operating systems - Cross-platform upgrades, such as 32-bit Windows Server 2008 to 64-bit Windows Server 2012 - Upgrades from any Itanium edition - Cross-language upgrades, such as from Windows Server 2008, U.S. English to Windows Server 2012, French In any of these cases, the Windows Setup program will not permit the upgrade to proceed. References: http://technet.microsoft.com/en-us/library/jj134246.aspx
Question: 8 You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)
http://www.certifyschool.com/exam/70-410/
Page | 9
www.CertifySchool.com Certification Preparation Material (PDF)
You create a virtual machine on Server1. You need to ensure that you can configure a pass-through disk for the virtual machine. What should you do? A. Delete partition E. B. Convert Disk 1 to a GPT disk. C. Convert Disk 1 to a dynamic disk. D. Take Disk 1 offline.
Answer: D Explanation: D: A Pass-Through disk is storage space that is only accessible by the virtual machine but it must be either a physical disk attached to the host server or a Storage Area Network (SAN) Logical Unit (LUN) mapped to the host server. To ensure that the virtual machine has exclusive access to the disk, it must be in an Offline state on the host server. Hyper-V allows the virtual machine to access the disk directly without it needing to be configured on the host server. Incorrect answers: A: Deleting partition E will not ensure that you will be able to configure a pass-through disk for the virtual machine since a pass-through disk is in fact a type of virtual disk that points to a physical disk drive that is installed on the server. B: Converting disks to GPT disks refers to partitioning of disks and not pass-through disks. C: There are two disk types: i.e. basic and dynamic. And you cannot use both types on the same disk drive. References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 3.2: Create and Configure virtual machine storage, Chapter 3: p. 159 Exam Ref 70-410: Installing and Configuring Server 2012: Objective 1.3: Installing and Configuring servers, Chapter 1: p. 42-43 http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper-v.aspx
Question: 9 http://www.certifyschool.com/exam/70-410/
Page | 10
www.CertifySchool.com Certification Preparation Material (PDF) Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Window Server 8 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member servers. You need to ensure that you can manage Server2 from Server1 by using Server Manager. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.) A. Install Remote Server Administration Tools on Server1. B. Install Windows Management Framework 3.0 on Server2. C. Install the Windows PowerShell 2.0 engine on Server1. D. Install Microsoft .NET Framework 4 on Server2. E. Install Remote Server Administration Tools on Server2.
Answer: B, D Explanation: To be able to fully manage remote servers that run Windows Server 2008 or the R2 Service Pack 1 operating system, you should install the .NET Framework 4 on Server2 first followed by the Windows Management Framework 3.0. Incorrect answers: A: Windows 8 Remote Server Administration tools are limited. C: This is an inappropriate tool in this case. E: Windows 8 Remote Server Administration tools are limited. References: http://technet.microsoft.com/en-us/library/hh831456.aspx Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 1: Preparing for Windows Server 2012 R2, Lesson 1: Planning for Windows Server 2012 R2, p. 7
Question: 10 Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers. The domain controllers are configured as shown in the following table.
In the perimeter network, you install a new server named Server1 that runs a Server Core Installation of Windows Server 8. You need to join Server1 to the contoso.com domain. What should you use? A. The New-ADComputer cmdlet B. The djoin.exe command C. The dsadd.exe command D. The Add-Computer cmdlet
Answer: B Explanation: B. Use djoin for offline join in the perimeter network Incorrect answers:
http://www.certifyschool.com/exam/70-410/
Page | 11
www.CertifySchool.com Certification Preparation Material (PDF) A. Executing this command will result in creating a new Active Directory computer. C. This command is used to add specific types of objects to the directory. D. This command is used to add the local computer to a domain or workgroup. References: http://technet.microsoft.com/en-us/library/ee617245.aspx http://technet.microsoft.com/en-us/library/ff793312(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc753708(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh849798.aspx
Question: 11 Your network contains a Windows Server 2012 R2 image named Server12.wim. Server12.wim contains the images shown in the following table.
Server12.wim is located in C:\. You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Server Datacenter image. You want to achieve this goal by using the minimum amount of Administrative effort. Which command should you run first? A. dism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount B. imagex.exe /capture c: c:\Server12.wim “Windows Server 2012 R2server datacenter� C. dism.exe /image: c:\Server12.wim /enable-feature /featurename: servermigration D. imagex.exe /apply c:\Server12.wim 4 c:\
Answer: A Explanation: This command will mount the image before making any changes. Incorrect answers: B. The imagex /capture command is used to create windows images .wim C. You need to mount the image first. D. The imagex /apply command is used to apply image to drive. References: http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx
Question: 12 You have a virtual machine named VM1. You install Windows Server 2012 R2 on VM1. You plan to use VM1 as an image that will be distributed to sales users to demonstrate the features of a custom application. The custom application only requires the Web Server (IIS) server role to be installed. You need to ensure that the VHD file for VM1 only contains the required Windows Server 2012 R2 source files. Which tool should you use? A. dism.exe B. ocsetup.exe
http://www.certifyschool.com/exam/70-410/
Page | 12
www.CertifySchool.com Certification Preparation Material (PDF) C. imagex.exe D. servermanagercmd.exe
Answer: A Explanation: This command will mount the image before making any changes. This will ensure that only the required Windows Server 2012 R2 source files are contained. Incorrect answers: B: The ocsetup command will execute a setup. C. The imagex.exe command is used to create windows and to apply image to drive. D: This is the wrong tool. References: http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22
Question: 13 You have a server named Server1 that runs Windows Server 2012 R2. You need to remove Windows Explorer, Windows Internet Explorer, and all related components and files from Server1. What should you run on Server1? A. Uninstall-WindowsFeature Server-Gui-Mgmt-Infra –Remove B. Uninstall-WindowsFeature Server-Gui-Shell –Remove C. msiexec.exe /uninstall iexplore.exe /x D. msiexec.exe /uninstall explorer.exe /x
Answer: B Explanation: B. Since there is no IE or taskbar, explorer or control panel you should execute the Uninstall-WindowsFeature ServerGui-Shell –Remove command. Incorrect answers: A. This command is used to install a server core. C. This command would leave some components. D. This command would leave components. References: http://technet.microsoft.com/en-us/library/hh831786(v=ws.11).aspx
Question: 14 You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1. You need to add a graphical user interface (GUI) to Server1. Which tool should you use? A. The setup.exe command B. The dism.exe command C. The imagex.exe command
http://www.certifyschool.com/exam/70-410/
Page | 13
www.CertifySchool.com Certification Preparation Material (PDF) D. The Add-WindowsPackage cmdlet
Answer: B Explanation: The DISM command is called by the Add-WindowsFeature command. Here is the syntax for DISM: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /featurename:Server-Gui-Mgmt Incorrect answers: A:The Dism command is used to add a graphical interface. C. The imagex.exe command is used to create windows and to apply image to drive. D: This is the wrong tool. References: http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22
Question: 15 You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters an connected to a network named LAN1. The two other network adapters are connected to a network named LAN2. You need to create a network adapter team from the three network adapters connected to LAN 1. Which tool should you use? A. Routing and Remote Access B. Network and Sharing Center C. Server Manager D. Network Load Balancing Manager
Answer: C Explanation: The Server Manager allows access to the network adapters where you can configure the network adapter team.
References: http://technet.microsoft.com/en-us/library/hh831648.aspx
http://www.certifyschool.com/exam/70-410/
Page | 14
www.CertifySchool.com Certification Preparation Material (PDF) Question: 16 Your company’s security policy states that all of the servers deployed to a branch office must not have the graphical user interface (GUI) installed. In a branch office, a support technician installs a server with a GUI installation of Windows Server 2012 R2 on a new server, and then configures the server as a DHCP server. You need to ensure that the new server meets the security policy. You want to achieve this goal by using the minimum amount of Administrative effort. What should you do? A. Reinstall Windows Server 2012 R2on the server. B. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience. C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE. D. From Server Manager, uninstall the User Interfaces and Infrastructure feature.
Answer: D Explanation: D. Least effort and removes full GUI Incorrect answers: A. Reinstalling Server 2012 can also be used to remove the full GUI, but it is not least effort. B. Uninstalls desktop experience not the full GUI which is a security requirement. C. Uninstalls the powershell ISE and not the full GUI. References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 2: Configure server roles and Features, p. 289-291, 293 http://technet.microsoft.com/en-us/library/cc772567.aspx http://blogs.technet.com/b/server_core/archive/2012/05/09/configuring-the-minimal-server-interface.aspx
Question: 17 You have a server named Server1 that has a Server Core installation of Windows Server 2008 R2. Server1 has the DHCP Server server role and the File Server server role installed. You need to upgrade Server1 to Windows Server 8 with the graphical user interface (GUI). The solution must meet the following requirements: Preserve the server roles and their configurations. Minimize Administrative effort. What should you do? A. On Server1, run setup.exe from the Windows Server 8 installation media and select Server with a GUI. B. Start Server1 from the Windows Server 8 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature. C. Start Server1 from the Windows Server 8 installation media and select Server with a GUI. D. On Server1, run setup.exe from the Windows Server 8 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature.
Answer: D Explanation: You should upgrade to 2012 and install GUI shell. Upgrades that switch from a Server Core installation to the Server with a GUI mode of Windows Server 2012 R2 in one step (and vice versa) are not supported. However, after upgrade is complete, Windows Server 2012 R2 allows you to switch freely between Server Core and Server with a GUI modes.
http://www.certifyschool.com/exam/70-410/
Page | 15
www.CertifySchool.com Certification Preparation Material (PDF) Incorrect answers: A. Server is on 2008 R2 core, must install 2012 core and then GUI B. This option should work, but it is not the least administrative effort. C. This option does not represent the least administrative effort even though it will have the same end result. References: http://technet.microsoft.com/en-us/library/jj574204.aspx http://technet.microsoft.com/library/hh831786.
Question: 18 Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. You need to install the Remote Desktop Services server role on Server2 remotely from Server1. Which tool should you use? A. The dsadd.exe command B. The Server Manager console C. The Remote Desktop Gateway Manager console D. The Install-RemoteAccess cmdlet
Answer: B Explanation: You can manage remote server by Srv Mgr and install roles/features using Windows Server 2012 R2. Incorrect answers: A. This command is used to add specific types of objects to the directory, not to install Remote Desktop Services. C. Remote Desktop Gateway (RD Gateway) is a role service that enables authorized remote users to connect to resources on an internal corporate or private network, from any Internet-connected device that can run the Remote Desktop Connection (RDC) client. D. Performs prerequisite checks for DirectAccess (DA) to ensure that it can be installed, installs DA for remote access (RA) (includes management of remote clients) or for management of remote clients only, and installs VPN (both Remote Access VPN and site-to-site VPN). References: http://technet.microsoft.com/en-us/library/cc753708(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831456.aspx http://technet.microsoft.com/en-us/library/cc725706.aspx http://technet.microsoft.com/en-us/library/hh918408(v=wps.620).aspx
Question: 19 You have a server named Server1 that runs a full installation of Windows Server 2012 R2. You need to uninstall the graphical user interface (GUI) on Server1. You must achieve this goal by using the minimum amount of Administrative effort. What should you do? A. Reinstall Windows Server 2012 R2 on the server. B. From Server Manager, uninstall the User Interfaces and Infrastructure feature. C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE. D. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.
Answer: B Explanation:
http://www.certifyschool.com/exam/70-410/
Page | 16
www.CertifySchool.com Certification Preparation Material (PDF) By uninstalling the graphical user interface using the Powershell command: Uninstall-WindowsFeature DesktopExperience, is the quick and least administrative effort method. Incorrect answers: A. This option should also achieve the objective, but not with the least administrative effort. C. Uninstalls PS-ISE and not the graphical user interface. D. With this option some GUI components still remain. It is this not the same as uninstalling. References: http://www.petri.co.il/switching-gui-server-core-windows-server-2012.htm
Question: 20 You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1. You need to add a graphical user interface (GUI) to Server1. Which tool should you use? A. the dism.exe command B. the Add-WindowsFeature cmdlet C. the imagex.exe command D. the setup.exe command E. the ocsetup.exe command F. the Add-WindowsPackage cmdlet G. the Install-Module cmdlet H. the Install-RoleService cmdlet
Answer: A, B Explanation: The DISM command is called by the Add-WindowsFeature command. Here is the syntax for DISM: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /featurename:Server-Gui-Mgmt Incorrect answers: C-H: You need to execute the dism.exe command to add a GUI. References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22
Question: 21 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1. When you try to add a RemoteFX 3D Video Adapter to VM1, you discover that the option is unavailable as shown in the following exhibit. (Click the Exhibit button.)
http://www.certifyschool.com/exam/70-410/
Page | 17
www.CertifySchool.com Certification Preparation Material (PDF)
You need to add the RemoteFX 3D Video Adapter to VM1. What should you do first? A. On Server1, install the Media Foundation feature. B. On Server1, install the Remote Desktop Visualization Host (RD Visualization Host) role service. C. On Server1, run the Enable-VMRemoteFxPhysicalVideoAdapter cmdlet. D. On Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet.
Answer: B Explanation: Remote Desktop services are not available in server core installation; you need to add the role. Incorrect answers: A. Enables one or more RemoteFX physical video adapters for use with RemoteFX-enabled virtual machines. C. Adds a RemoteFX video adapter in a virtual machine. D. Role must be added for host first. References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 1: Installing and Configuring servers, Objective 1.2: Configure servers, p. 19 http://technet.microsoft.com/en-us/library/hh848506(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh848520(v=wps.620).aspx http://technet.microsoft.com/en-us/library/ff817586(v=ws.10).aspx
http://www.certifyschool.com/exam/70-410/
Page | 18
www.CertifySchool.com Certification Preparation Material (PDF) Question: 22 You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1. You need to add a graphical user interface (GUI) to Server1. Which tool should you use? A. The Add-WindowsPackage cmdlet B. The ocsetup.exe command C. The Add-WindowsFeature cmdlet D. The Install-RoleService cmdlet
Answer: C Explanation: The Add-WindowsFeature utility will allow you to add a graphical user interface to the server. Incorrect answers: A: This utility is used to add installer packages. B: This command is used to execute a setup and not to add a graphical user interface. D: This utility is used to install roles on servers. References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 2: Configure server roles and Features, p. 117 http://technet.microsoft.com/en-us/library/ee662309.aspx http://technet.microsoft.com/en-us/library/hh852164.aspx
Question: 23 You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter. You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Click the Exhibit button.)
http://www.certifyschool.com/exam/70-410/
Page | 19
www.CertifySchool.com Certification Preparation Material (PDF)
You review the installed features on Server1 as shown in the Features exhibit. (Click the Exhibit button.)
You need to install the Server Graphical Shell feature on Server1. Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.) A. Index 1 B. Index 2 C. Index 3 D. Index 4
Answer: B, D Explanation: When you install Windows Server 2012 R2, you can choose between Server Core Installation and Server with a GUI. The “Server with a GUI” option is the Windows Server 2012 R2 equivalent of the Full installation option available in Windows Server 2008 R2. The “Server Core Installation” option reduces the space required on disk, the potential attack surface, and especially the servicing requirements, so we recommend that you choose the Server Core installation unless you have a particular need for the additional user interface elements and graphical management tools that are included in the “Server with a GUI” option. For this reason, the Server Core installation is now the default. Because you can freely switch between these options at any time later, one approach might be to initially
http://www.certifyschool.com/exam/70-410/
Page | 20
www.CertifySchool.com Certification Preparation Material (PDF) install the Server with a GUI option, use the graphical tools to configure the server, and then later switch to the Server Core Installation option. Reference: Windows Server Installation Options
Question: 24 You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1. You need to add a graphical user interface (GUI) to Server1. Which tool should you use? A. the setup.exe command B. the dism.exe command C. the Install-RoleService cmdlet D. the Install-Module cmdlet
Answer: B Explanation: There are a couple of ways to install the GUI from the command prompt, although both use the same tool – DISM (Deployment Image Service Manager). When you are doing it for a single (local) server, the command is: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /featurename:Server-Gui-Mgmt Incorrect answers: A: the DISM utility is used to install a graphical user interface. C: This is not a RoleService that needs to be installed. D: You should install a graphical user interface and not a module. References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22
Question: 25 DRAG DROP Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 and Server2 run a Server with a GUI installation of Windows Server 2012 R2. You remove the Graphical Management Tools and Infrastructure feature on Server2. You need to restart Server2. What should you do? (To answer, drag the appropriate tools to the correct statements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer: http://www.certifyschool.com/exam/70-410/
Page | 21
www.CertifySchool.com Certification Preparation Material (PDF)
Explanation: When you uninstall "Server-GUI-Shell" you are left with a "Minimal Server Interface" server. So, File Explorer and IE10 are unavailable, but MMC and Server Manager works and MMC and Server Manager will allow you to restart server2 either locally or remotely from Server1. References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22
http://www.certifyschool.com/exam/70-410/
Page | 22
www.CertifySchool.com Certification Preparation Material (PDF)
Demo Product – For More Information – Visit link below:
http://www.certifyschool.com/exam/70-410/
Thanks for Using Our Product
http://www.certifyschool.com/exam/70-410/
Page | 23