PORTFOLIO
CHANDANA KALIDINDI
1
2
3
This portfolio includes selected works which includes architectural, urban design and interior design works done during various stages of my student life
4
CONTENTS
HOSTEL
6-11
SKILL DEVELOPMENT CENTER
12-13
URBAN DESIGN MASTERPLAN
14-29
INTERIOR DESIGN
30-31
WORKING DRAWINGS
32-43
EXTRAS - PHOTOGRAPHY
44-45
5
6
7
8
9
10
11
12
13
MASTER PLAN
LOCATION : CHIPPADA, VISAKHAPATNAM, AP CLIMATE : WARM AND HUMID TYPOLOGY : MIXED USE NEIGHBOURHOOD CATEGORY : GREEN FIELD DEVELOPMENT SITE AREA : 150 ACRES POPULATION : 12,670 HOUSEHOLDS : 850 POPULATION DENSITY BUILDING DENSITY GROUND COVERAGE :
14
15
16
17
PLOT AND BLOC
18
CK TYPOLOGIES
19
20
21
22
23
24
25
26
27
28
29
WORKING DRAWINGS 01
BRIEF: Working drawings for my residence design.
REQUIREMENTS • All muncipal drawings
30
31
32
33
WORKING DRAWINGS 02 BRIEF: The apartment has 4 units per floor in 4 floors and 1 commercial unit in ground floor on stilt floor • propose over-head tank - mark its size and position on terrace plan with intake lines layout. • Total volume of discharge per day - Propose and show drainage lines layout in site plan • Proposal of ground water recharge (rain water harvesting) system.
REQUIREMENTS • • • •
Skin sections Elevations Site plan showing drain lines Terrace plan indicating water intake, distribution and R.W discharge
34
35
GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED. 2.DIMENSIONS ARE NOT TO BE SCALED. 3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS 4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION. 5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK. 6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING.
I.C
I.C
LVL +23.2
17.97
I.C
SL.NO REVISION
5.63
DATE
LVL +22.1M
WATER TANK
2.00
R.W.H PIT
7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT.
2.48
WATER INTAKE
3.52
0.28 1.00
2.00
2.00
SPECIFICATION: I.C
I.C
19.94
HEAD ROOM
I.C
12.43
LIFT
I.C
I.C
LVL +20M
0.50
4.48 R.W.H
1.00
1.00
I.C
5.03
23.47
4.89
SCHEDULE OF DOORS AND WINDOWS
I.C
TYPE
I.C
I.C
1.67
R.W.H
0.50
4.82
I.C
LVL +0
4.8
1
LVL +0.3M
LVL +0
LVL +0.15M
LINTEL
1M*2.1M
0M
2.1M
D2
0.9M*2.1M
0M
2.1M
D3
0.75M*2.1M
0M
2.1M
W1
1.75M*1.35M
0.7M
2.1M
W2 150°
ENTRY
SILL
SIZE
D1
0.527M*0.7M
1.4M
2.1M
W3
1.22M*1.35M
0.7M
2.1M
V1
0.6M*0.45M
2.1M
2.55M
CLIENT :
PROJECT TITLE :
APARTMENT
DRAWING NO :
DRAWING TITLE :
DRAIN OUTLETS
ARCHITECT :
SCALE :
6-B
1:100
DEALT BY : DRAWN BY :
REVISION NO :
CHANDANA KALIDINDI REG. No.: 121815502014 SEMESTER: VII B NAME:
NORTH
SCHOOL OF ARCHITECTURE
GITAM(DEEMED TO BE UNIVERSITY)
GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED. 2.DIMENSIONS ARE NOT TO BE SCALED. 3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS 4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION. 5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK. 6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING. 7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT. 1.31
2.00
75mm dia rainwater pipe
75mm dia rainwater pipe
SL.NO REVISION
DATE
5.63
SPECIFICATION: 3.60
LVL +23.2
3.09 [10'-1 1/2"]
WATER TANK
LVL +22.1M
UNDERGROUND WATER STORAGE
R.W.H PIT
2.48
WATER INTAKE
3.52
0.28 1.00
2.00
2.00
3.58 [11'-9"]
RIDGE LINE
1.69
RIDGE LINE
LIFT
LVL +20M
75mm dia rainwater pipe
R.W.H
1.00
5.03
1.00
0.50
R.W.H
4.89
100mm dia rainwater pipe
0.50
SCHEDULE OF DOORS AND WINDOWS 4.82
4.48
TYPE
SIZE
SILL
LINTEL
D1
1M*2.1M
0M
2.1M
D2
0.9M*2.1M
0M
2.1M
D3
0.75M*2.1M
0M
2.1M
W1
1.75M*1.35M
0.7M
2.1M
W2
0.527M*0.7M
1.4M
2.1M
W3
1.22M*1.35M
0.7M
2.1M
V1
0.6M*0.45M
2.1M
2.55M
CLIENT :
PROJECT TITLE :
APARTMENT
DRAWING TITLE :
PLUMBING LAYOUT
ARCHITECT :
DRAWING NO : SCALE :
DEALT BY : DRAWN BY :
REVISION NO : NORTH
CHANDANA KALIDINDI REG. No.: 121815502014 SEMESTER: VII B NAME:
SCHOOL OF ARCHITECTURE
36
6-A
1:100
GITAM(DEEMED TO BE UNIVERSITY)
GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED.
B'
2.DIMENSIONS ARE NOT TO BE SCALED. HEADROOM 22.5M
3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS
FOURTH FLOOR HEIGHT 20M
5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK.
1.60 [5'-3"]
A'
4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION.
6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING.
6th slab lvl. 3.00 [9'-10"]
6th slab lvl. 0.11
7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT.
0.30
THIRD FLOOR HEIGHT 17M
1.30
0.15
0.80
0.15 0.75
0.10
0.70
0.90 [2'-11 1/2"]
0.10
0.49
5th slab lvl.
SL.NO REVISION
4th slab lvl.
SPECIFICATION:
DATE
0.15
1.55
3.00 [9'-10"]
5th slab lvl.
1.90
LVL +0.6M
SECOND FLOOR LEVEL 14M
LVL +0.3M
LVL -5.1M
0.95
LVL -3.6M LVL +0.6M
FIRST FLOOR LEVEL 11M
LVL +0.3M
0.40 1.90
GROUND FLOOR LEVEL 8M
0.15 [6"]
2.40
0.12 [4 1/2"]
2nd slab lvl.
2nd slab lvl.
0.60
4.00 [13'-1 1/2"]
0.450.15
3rd slab lvl.
0.10 [4"]
LVL -3.6M 0.13 [5"]
0.30
LVL +0 3rd slab lvl.
3.00 [9'-10 1/2"]
0.30
1.90
0.15
3.00 [9'-10"]
4th slab lvl.
LVL +0
STILT LEVEL 4M
1st slab lvl. 3.00 [9'-10"]
1st slab lvl.
1.00 [3'-3 1/2"]
PLINTH LEVEL 1M
A
SECTION - AA' 1.50
KITCHEN
BALCONY
C.BEDROOM
TOILET
SCHEDULE OF DOORS AND WINDOWS
SECTION - BB' C.BEDROOM
UTILITY
KITCHEN
SILL
LINTEL
D1
1M*2.1M
0M
2.1M
D2
0.9M*2.1M
0M
2.1M
D3
0.75M*2.1M
0M
2.1M
W1
1.75M*1.35M
0.7M
2.1M
TYPE
SIZE
W2
BALCONY
TOILET
0.60
1.00
UTILITY
B
EAST ELEVATION
1.4M
0.527M*0.7M 1.22M*1.35M
0.7M
2.1M
V1
0.6M*0.45M
2.1M
2.55M
CLIENT :
1.45
FLOOR PLAN
PROJECT TITLE :
APARTMENT
1.00
SKIN SECTIONS
ARCHITECT :
COMMERCIAL FLOOR PLAN
SCALE=1:10
5-A
DRAWING NO :
DRAWING TITLE :
1.50
DETAIL AT AA'
2.1M
W3
SCALE :
1:100
DEALT BY : DRAWN BY :
REVISION NO :
CHANDANA KALIDINDI
NAME:
NORTH
STILT FLOOR PLAN
121815502014 VII B
REG. No.:
SEMESTER:
SCHOOL OF ARCHITECTURE
GITAM(DEEMED TO BE UNIVERSITY)
GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED. 2.DIMENSIONS ARE NOT TO BE SCALED. 3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS
0.90 [2'-11 1/2"]
HEADROOM 22.5M
4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION.
FOURTH FLOOR HEIGHT 20M
3.00 [9'-10"]
5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK. 6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING.
THIRD FLOOR HEIGHT 17M
3.00 [9'-10"]
7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT.
LVL -3.08
SECOND FLOOR LEVEL 14M
DATE
3.00 [9'-10"]
SL.NO REVISION LVL +0.6M
LVL +0.6M FIRST FLOOR LEVEL 11M
KEY PLANS
SPECIFICATION:
GROUND FLOOR LEVEL 8M
4.45 [14'-7"]
0.12 [4 1/2"]
0.15 [6"]
0.13 [5"]
0.10 [4"]
3.00 [9'-10 1/2"]
LVL +0
TOILET
TOILET C.BEDROOM
C.BEDROOM
BALCONY
BALCONY
M.BEDROOM
M.BEDROOM
TOILET
TOILET
DINING
LIVING
DINING
LIVING
LIVING UTILITY
KITCHEN
UTILITY
KITCHEN/DINING
6'-6" WIDE CORRIDOR
STILT LEVEL 4M
LIFT
DINING
M.BEDROOM
TOILET
TOILET
C.BEDROOM
2.55 [8'-4 1/2"]
UTILITY
LIVING
M.BEDROOM
KITCHEN
C.BEDROOM
BALCONY
TOILET
UTILITY
KITCHEN
BALCONY
TOILET
FLOOR PLAN
1.00 [3'-3 1/2"]
PLINTH LEVEL 1M
WEST ELEVATION
LIFT
COMMERCIAL FLOOR PLAN HEADROOM 22.5M LVL -9.56M
LVL -9.64M
0.12 [4 1/2"]
FOURTH FLOOR HEIGHT 20M
FOURTH FLOOR HEIGHT 20M
THIRD FLOOR HEIGHT 17M
THIRD FLOOR HEIGHT 17M
SECOND FLOOR LEVEL 14M
SECOND FLOOR LEVEL 14M
LIFT
0.10 [4"] 0.15 [6"]
0.13 [5"]
HEADROOM 22.5M
STILT FLOOR PLAN
LVL +0
SILL
LINTEL
1M*2.1M
0M
2.1M
D2
0.9M*2.1M
0M
2.1M
D3
0.75M*2.1M
0M
W1
1.75M*1.35M
TYPE
SIZE
D1 LVL +0.6M
LVL +0.6M LVL +0 LVL +0
LVL -7.50
FIRST FLOOR LEVEL 11M
LVL +0
FIRST FLOOR LEVEL 11M
LVL +0
GROUND FLOOR LEVEL 8M
GROUND FLOOR LEVEL 8M
STILT LEVEL 4M
STILT LEVEL 4M
W2
0.527M*0.7M
2.1M
0.7M
2.1M
1.4M
2.1M
W3
1.22M*1.35M
0.7M
2.1M
V1
0.6M*0.45M
2.1M
2.55M
CLIENT :
PROJECT TITLE :
APARTMENT
DRAWING TITLE :
ELEVATIONS
PLINTH LEVEL 1M
NORTH ELEVATION
PLINTH LEVEL 1M
SOUTH ELEVATION
ARCHITECT :
DRAWING NO : SCALE :
5-B
1:150
DEALT BY : DRAWN BY :
REVISION NO : NORTH
CHANDANA KALIDINDI REG. No.: 121815502014 SEMESTER: VII B NAME:
SCHOOL OF ARCHITECTURE
GITAM(DEEMED TO BE UNIVERSITY)
37
WORKING DRAWINGS 03 BRIEF : Documenting my current home with all the details including reflected ceiling plan and electrical layout. • Detailing out the kitchen. • Detailing out the toilet and proposal of the redesign.
PROJECT Location : Tpt colony NE, seethammadhara, visakhapatnam Description : G+4 residence with 2 flats on each floor
38
PRODUCED BY AN AUTODESK STUDENT VERSION GENERAL NOTES :
1465
11847 1100
798
573
1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED.
400
W2
1750
1271
2.DIMENSIONS ARE NOT TO BE SCALED. 3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS
1047
4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION.
802
UTILITY 1.4 M WIDE
DINING AND POOJA 3.55 * 3.28
KITCHEN 2.35*2.83
5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK.
750
949
W1
2977
W3
6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING. 7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT.
SCHEDULE OF DOORS AND WINDOWS
800
SILL
LINTEL
D1
1M*2.1M
0M
2.1M
D2
0.9M*2.1M
0M
2.1M
D3
0.75M*2.1M
0M
2.1M
W1
1.75M*1.35M
0.7M
2.1M
TYPE
750 860
800
860
LIVING HALL 3.35*7.9
493
TOILET 2.51*1.22
485
SIZE
BEDROOM 2 3.55 * 3.25
1.4M
0.527M*0.7M
2.1M
W3
1.22M*1.35M
0.7M
2.1M
V1
1M*0.6M
2.1M
2.7M
V2
0.5M*0.6M
2.1M
2.1M
625
625
BEDROOM 1 3.77*3.22
1750
W2
2148
1750
SPECIFICATION:
W1
8228
493
895
139
TOILET 2.17*1.52 1030
DATE
465
SL.NO REVISION
1379
2421
1000
FLOOR PLAN ..\..\..\Downloads\WhatsApp Image 2021-11-01 at 19.46.42.jpeg
CLIENT :
UP
..\..\..\Downloads\WhatsApp Image 2021-11-01 at 19.44.35.jpeg
PROJECT TITLE :
BEDROOM
APARTMENT
DRAWING NO :
DRAWING TITLE :
AS BUILT DRAWING OF FLAT
ARCHITECT :
SCALE :
1
1:30
DEALT BY : DRAWN BY :
LIVING ROOM
REVISION NO : NORTH
DINING
KEY PLAN
NAME:
CHANDANA KALIDINDI 121815502014 VII B
REG. No.:
SEMESTER:
SCHOOL OF ARCHITECTURE
GITAM(DEEMED TO BE UNIVERSITY)
PRODUCED BY AN AUTODESK STUDENT VERSION
39
PRODUCED BY AN AUTODESK STUDENT VERSION GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED. 2.DIMENSIONS ARE NOT TO BE SCALED.
GEYSER
3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS
GEYSER
WATER INLET 25mm Ø
B
4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION.
75mm Ø WASTE WATER PIPE
D
457 A
A C
100 mm Ø
5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK.
WATER PIPE 50mm Ø
B
1790
TOILET 2180*1524
TILE 300*300
A'
579
D
B'
2469
A C
B
7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT.
VENTILATOR
SL.NO REVISION
PIPE LINE LAYOUT
BEDROOM 1 LVL +0
FLOOR PLAN
6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING.
TOILET 2174*1524
LVL -0.15
S.B
SOIL PIPE
N.T
579
117
DATE
AT LVL 1200M
GEYSER
GEYSER
RCC WALL TH : 150MM
RCC WALL TH : 150MM
PLASTER TH : 12MM
PLASTER TH : 12MM
JAGUAR COMPANY TAP, SILVER POLISHED FINISH WATER PIPE 50mm Ø
FLOOR MOUNTED WC
FLOOR MOUNTED WC
TOILET 2174*1524
TILE 300*450 TH : 8MM
TILE 300*450 TH : 8MM 150
SOIL PIPE 100 mm Ø
WASTE WATER PIPE 75mm Ø
SECTION- AA'
CURRENT POINT
KEY PLAN
EXHAUST 290 290
CLIENT :
373
402
20WT BULB
SECTION- BB'
205
PROJECT TITLE :
APARTMENT
DRAWING NO :
DRAWING TITLE :
2460
2250
2509
2250
2460
2460
442
651
TOILET LAYOUT
TILE 300*450 TH : 8MM
438
TILE 300*450 TH : 8MM
625
890
ARCHITECT :
654
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
SPECIFICATION:
TILE 300*450 TH : 8MM
TILE 300*450 TH : 8MM
ELEVATION- D
ELEVATION- C
ELEVATION- B
2
1:30
DRAWN BY : REVISION NO :
ELEVATION- A
SCALE : DEALT BY :
NORTH
CHANDANA KALIDINDI REG. No.: 121815502014 SEMESTER: VII B NAME:
SCHOOL OF ARCHITECTURE
GITAM(DEEMED TO BE UNIVERSITY)
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED. 2.DIMENSIONS ARE NOT TO BE SCALED. 3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS
GEYSER
210 150
GEYSER
4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION.
RCC WALL TH : 150MM
RCC WALL TH : 150MM PLASTER TH : 12MM
5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK.
PLASTER TH : 12MM
6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING. 7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT.
FLOOR MOUNTED WC WATER PIPE 50mm Ø
FLOOR MOUNTED WC
SL.NO REVISION
150
SOIL PIPE 100 mm Ø
WASTE WATER PIPE
WASTE WATER PIPE
75mm Ø
75mm Ø
SPECIFICATION:
SECTION- AA'
SECTION- BB'
GLASS SLIDING DOOR
EXHAUST 290 290
GEYSER
WATER INLET 25mm Ø
829
B
WASTE WATER PIPE 75mm Ø
N.T
100 mm Ø
WATER PIPE 50mm Ø
A'
TOILET 2174*1524
ANTI-SKID FLOORING TILE 600*250
TILE 300*300
2460
A
LVL -0.15
D
TILE 300*450 TH : 8MM
B'
A C
B
VENTILATOR
TOILET 2174*1524
438
2460
2250
SOIL PIPE
N.T WET AREA
SLIDING DOOR
BEDROOM 1 LVL +0
REDESIGNED PLAN LAYOUT
ELEVATION- D
TILE 300*450 TH : 8MM
ELEVATION- B
AT LVL 1200
CURRENT POINT GEYSER
KEY PLAN
PVC SLIDING DOOR, LAMINATE FINISH
20WT BULB
FLOOR MOUNTED WC
2509
2205
CLIENT :
TILE 300*450 TH : 8MM
TILE 300*450 TH : 8MM
PROJECT TITLE :
APARTMENT
DRAWING NO :
DRAWING TITLE :
TOILET REDESIGN ARCHITECT :
SCALE :
1:30
DEALT BY : DRAWN BY :
ELEVATION A
ELEVATION- C
REVISION NO : NORTH
CHANDANA KALIDINDI REG. No.: 121815502014 SEMESTER: VII B NAME:
SCHOOL OF ARCHITECTURE
GITAM(DEEMED TO BE UNIVERSITY)
PRODUCED BY AN AUTODESK STUDENT VERSION
40
3
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
DATE
TILE 300*450 TH : 8MM
TILE 300*450 TH : 8MM
PRODUCED BY AN AUTODESK STUDENT VERSION GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED.
CLIX MAGIX 2 BURNER GAS STOVE, BLACK (350mm*650mm*120mm)
STAINLESS STEEL SINK (530*430*22)
2.DIMENSIONS ARE NOT TO BE SCALED.
CERA TAPS
W2
115
3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS
115
S.B
4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION.
318
GRANITE MARBLE COUNTER TOP
S.B
600
S.B
W2
115
115
1923
5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK.
2363
A
A D
3233
C
A
S.B
D
7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT.
UTILITY 1.4 M WIDE
C
SL.NO REVISION
DATE
WHIRLPOOL WASHING MACHINE, TOP LOADED
300mm*800mm
413
546
214 23
SPECIFICATION: 450
1000
23
1194
115
1194
115
1000
115
450
3111
1381
PLAN AT 450MM
PLAN AT 1200MM
PRODUCED BY AN AUTODESK STUDENT VERSION
BELOW THE COUNTER TOP
ABOVE THE COUNTER TOP
PRODUCED BY AN AUTODESK STUDENT VERSION
A
STAINLESS STEEL UTENSIL RACK 300mm*800mm
LVL -0.15MM
LVL +0MM
S.B
115
3233
1090
6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING.
UTILITY 1.4 M WIDE
150
METAL GRILL, BLACK
750
850
CERAMIC WALL TILE TH : 10MM
CERAMIC WALL TILE TH : 10MM
402
45
900 3000
579
600
800
453
37
716
47
600
KEY PLAN SECTIONAL ELEVATION A
SECTIONAL ELEVATION B
METAL GRILL, BLACK
CLIENT :
PROJECT TITLE :
APARTMENT
CERAMIC WALL TILE TH : 10MM 2700
139
CERAMIC WALL TILE TH : 10MM
ARCHITECT :
1400 1700
217 600
SCALE :
469
320
DRAWN BY : REVISION NO :
NAME: CHANDANA KALIDINDI REG. No.: 121815502014
NORTH
SECTIONAL ELEVATION D
SECTIONAL ELEVATION C
1:30
DEALT BY :
970
430
4
DRAWING NO :
DRAWING TITLE : KITCHEN LAYOUT PLAN
SEMESTER: VII B SCHOOL OF ARCHITECTURE GITAM(DEEMED TO BE UNIVERSITY)
PRODUCED BY AN AUTODESK STUDENT VERSION PRODUCED BY AN AUTODESK STUDENT VERSION GENERAL NOTES : 1.ALL THE DIMENSIONS ARE IN MM AND ANGLES IN MM UNLESS OTHERWISE MENTIONED. 3.ARCHITECTURAL DRAWING MUST ALWAYS BE READ IN CONJUNCTION WITH ALL OTHER RELEVANT SERVICE DRAWINGS AND CONTRACT DOCUMENTS
686
4.ANY DISCREPANCY BETWEEN THE DRAWINGS AND DOCUMENTS SHOULD BE REPORTED TO THE ARCHITECT FOR CLARIFICATION AND VERIFICATION.
544
1246
1453
2.DIMENSIONS ARE NOT TO BE SCALED.
1512
6. CONTRACTOR MUST NOTIFY THE ARCHITECT AND PROJECT MANAGER OF ALL DISCREPANCIES IN THE DRAWING.
1652
3176
1737
5.CONTRACTOR MUST VERIFY ALL DIMENSION AT SITE BEFORE COMMENCEMENT OF ANY WORK.
7.THESE DRAWINGS ARE THE PROPERTY OF ARCHITECT....... AND MAY BE REPRODUCED ONLY WITH WRITTEN PERMISSION AUTHORIZED REPRODUCTIONS MUST BEAR THE NAME AND SIGNATURE OF THE ARCHITECT. SL.NO REVISION
3325
SPECIFICATION:
1838 1590
1671 208
ELECTRICAL MAIN SYMBOL
PRODUCED BY AN AUTODESK STUDENT VERSION
1249
1711
693
1495
DESCRIPTION CEILING FAN
ELECTRICAL LAYOUT
LED LIGHTS ON CEILING WALL MOUNTED LIGHTS ONE-WAY SWITCH FAN REGULATOR
686
LVL +0.9
6A SOCKET WITH SWITCH
544 380
1458
1453
668
248
TV POINT WALL MOUNTED LIGHTS
1737
16A SOCKET WITH SWITCH
LVL +0.9
978
1652
3176
LVL +1.5
LVL +0.9
7305
LVL +1.5
706 248
CLIENT :
PROJECT TITLE :
LVL +1.5
REFLECTED CEILING PLAN
LVL +0.9
DRAWING TITLE :
1590
328
2080
693
1115
APARTMENT
1711
LVL +2.7
1590
328
1711
1671
LVL +1.5
LVL +1.5
1838
1115 1719
LVL +1.5
LVL +1.5
3325
1645 1495
706
1165
1142
693
248
2740
248
1252
ELECTRICAL LAYOUT
2080
ELECTRICAL WIRING LAYOUT
ARCHITECT :
DRAWING NO : SCALE :
6
1:30
DEALT BY : DRAWN BY :
REVISION NO : NORTH
NAME: CHANDANA KALIDINDI REG. No.: 121815502014 SEMESTER: VII B SCHOOL OF ARCHITECTURE GITAM(DEEMED TO BE UNIVERSITY)
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
1165
1142
1645
1252
DATE
41
42
43
Email : chandana7141@gmail.com Phone: +91 7013815251
44