Vi self study exam preparatory note part 1

Page 1

ASNT Level III Visual Testing, VT

2014-August My Self Study Exam Preparatory Notes

Charlie Chong/ Fion Zhang


Charlie Chong/ Fion Zhang


Charlie Chong/ Fion Zhang


Fion Zhang 2014/August/15

http://meilishouxihu.blog.163.com/ Charlie Chong/ Fion Zhang


ASNT Certification Guide NDT Level III / PdM Level III- VT - Visual Testing Length: 2 hours Questions: 90 1. Fundamentals • Vision and light • Ambient conditions • Test object characteristics 2. Equipment Accessories • Magnifiers/microscopes • Mirrors • Dimensional • Borescopes • Video systems • Automated systems • Video technologies 5

Charlie Chong/ Fion Zhang


• Machine vision • Replication • Temperature sensitive markers and surface comparators • Chemical aids • Photography • Eye 3. Techniques/Calibration • Diagrams and drawings • Raw materials • Primary process materials • Joining processes • Fabricated components • In-service materials • Coatings • Other applications • Requirements

6

Charlie Chong/ Fion Zhang


4. Interpretation/ Evaluation • Equipment including type and intensity of light • Material including the variations of surface finish • Discontinuity • Determination of dimensions (i.e.: depth, width, length, etc.) • Sampling/scanning • Process for reporting visual discontinuities • Personnel (human factors) • Detection 5. Procedures and Documentation • Hard copy • Photography • Audio/video • Electronic and magnetic media

7

Charlie Chong/ Fion Zhang


6. Safety • Electrical shock • Mechanical hazards • Lighting hazards • Chemical contamination • Radioactive materials • Explosive environments Reference Catalog Number NDT Handbook: Second Edition: Volume 8, Visual and Optical Testing 133 ASNT Level III Study Guide: Visual and Optical Testing 2263 ASM Handbook: Vol. 17, NDE and QC 105

8

Charlie Chong/ Fion Zhang


SI Multiplier

http://www.poynton.com/notes/units/

Charlie Chong/ Fion Zhang


Other Reading: http://quizlet.com/29958394/visual-inspection-test-flash-cards/

Charlie Chong/ Fion Zhang


Reading 1

Charlie Chong/ Fion Zhang


Key Points Only

Charlie Chong/ Fion Zhang


Reading 1

Charlie Chong/ Fion Zhang


Section 1: Introduction to Visual & Optical Testing Chapter 1: Fundamental of Light & Lighting

Charlie Chong/ Fion Zhang


About Vision

Charlie Chong/ Fion Zhang


Keywords:  Wavelength that excite retina 380~770 nm (380 x10-9 ~ 770 x10-9 m)  Electromagnetic theory also known as Maxwell Theory  Plank’s Quantum theory E= hv, h = plank’s constant (1.626 x 10-34 Joule. Second), v = frequency (Hz)

Charlie Chong/ Fion Zhang


Keywords: ď Ž Light Spectrum

Charlie Chong/ Fion Zhang


Keywords: ď Ž Light Spectrum

Charlie Chong/ Fion Zhang


Keywords: ď Ž Scoptic & Photopic Visions

Charlie Chong/ Fion Zhang


Keywords: ď Ž Photopic--daylight--response of the human eye

380nm

Charlie Chong/ Fion Zhang

770nm


Keywords: ď Ž Scotopic- night response of the human eye. Note the loss of sensitivity to blue and red wavelengths.

Charlie Chong/ Fion Zhang


Keywords: ď Ž Scotopic & Photopic

http://www.nature.nps.gov/night/science.cfm

Charlie Chong/ Fion Zhang


Keywords:  Subtractive primaries  Additive primaries

Charlie Chong/ Fion Zhang


Magenta

Charlie Chong/ Fion Zhang


Cyan

Charlie Chong/ Fion Zhang


Keywords: Refraction Index n = Vv / Vm

,

Speed of light in medium, C = 位v / n Vv Vm

= Velocity of light in vacuum = Velocity of light in material

Charlie Chong/ Fion Zhang


Light Refraction: Refractive Index of Medium Refraction Index n = Vv / Vm , Speed of light in medium, C = λv / n Light Refraction: Snell Law Sin ϴ1 / V1 = Sin ϴ2 / V2 , Sin ϴ1 n1 = Sin ϴ2 n2 As the speed of light is reduced in the slower medium, the wavelength is shortened proportionately. The frequency is unchanged; it is a characteristic of the source of the light and unaffected by medium changes.

Charlie Chong/ Fion Zhang


Light Refraction: Refractive Index of Medium

Sin ϴ1 n1 = Sin ϴ2 n2

Charlie Chong/ Fion Zhang


Light Refraction: Refractive Index of Medium

http://www.physicsclassroom.com/shwave/refraction.cfm

Charlie Chong/ Fion Zhang


Surface Luminance: Inverse Square Law

Surface Luminance: E = I / d2 E = Source luminance, I= Source illuminances, d= distance

Charlie Chong/ Fion Zhang


Surface Luminance: Inverse Square & Lambert Law

Surface Luminance: E = I / d2 x CosÎą E = Surface luminance, I= Source illuminances, d= distance, Îą = angle of incidence from normal

Charlie Chong/ Fion Zhang


Surface Luminance: Inverse Square & Lambert Law

Surface Luminance: E = I / d2 x CosÎą

Charlie Chong/ Fion Zhang


Surface Luminance: Lambert’s Law In optics, Lambert's cosine law says that the radiant intensity or luminous intensity observed from an ideal diffusely reflecting surface or ideal diffuse radiator is directly proportional to the cosine of the angle θ between the observer's line of sight and the surface normal. The law is also known as the cosine emission law[3] or Lambert's emission law. It is named after Johann Heinrich Lambert, from his Photometria, published in 1760. A surface which obeys Lambert's law is said to be Lambertian, and exhibits Lambertian reflectance. Such a surface has the same radiance when viewed from any angle. This means, for example, that to the human eye it has the same apparent brightness (or luminance). It has the same radiance because, although the emitted power from a given area element is reduced by the cosine of the emission angle, the apparent size (solid angle) of the observed area, as seen by a viewer, is decreased by a corresponding amount. Therefore, its radiance (power per unit solid angle per unit projected source area) is the same.

Charlie Chong/ Fion Zhang


Surface Luminance: Lambert’s Cosine Law

http://en.wikipedia.org/wiki/Lambert%27s_cosine_law

Charlie Chong/ Fion Zhang


Surface Luminance: Lambert’s Cosine Law

Surface Luminance: E = I / d2 x Cos ϴ,

Sin ϴ1 / V1 = Sin ϴ2 / V2 , Sin ϴ1 n1 = Sin ϴ2 n2 ,

Charlie Chong/ Fion Zhang


Charlie Chong/ Fion Zhang


Charlie Chong/ Fion Zhang


Keywords: Absorptive Characteristic  Selective absorptive material – distinctive color  Non-selective absorptive material- black or gray appearance Transmitive Characteristics  Transparent materials- Transmitted light without apparent scatter.  Translucent materials- Transmitted large part of light with scattered some portion due to diffusion (diffusion?)  Opaque materials- Transmit no light, all of the spectrum is absorbed or reflected or combination of both.

Charlie Chong/ Fion Zhang


Charlie Chong/ Fion Zhang


Flood the surface with as much light as possible and minimize shadow.

Charlie Chong/ Fion Zhang

Surface irregularities reflected the light toward from camera


Surface irregularities reflected the light away from camera

Charlie Chong/ Fion Zhang


Edges detection on opaque objects

Charlie Chong/ Fion Zhang

As with dark field front, this setup requires the camera to shown dark field.


The lambert (symbol L, la or Lb) is a non-SI unit of luminance named for Johann Heinrich Lambert (1728–1777), a Swiss mathematician, physicist and astronomer. A related unit of luminance, the foot-lambert, is used in the lighting, cinema and flight simulation industries. The SI unit is the candela per square metre (cd/m²).

http://en.wikipedia.org/wiki/Lambert_(unit)

Charlie Chong/ Fion Zhang


Chapter 2: Physiology of Vision

Charlie Chong/ Fion Zhang


Charlie Chong/ Fion Zhang


http://starizona.com/acb/basics/observing_theory.aspx

Charlie Chong/ Fion Zhang


The Eyes

Charlie Chong/ Fion Zhang


Keywords: Iris- Contracted, dilated PupilsChromatic aberration Spherical aberration Note: An aberration is something that deviates from the normal way.

Charlie Chong/ Fion Zhang


Rods and Cones The retina contains two types of photoreceptors, rods and cones. The rods are more numerous, some 120 million, and are more sensitive than the cones. However, they are not sensitive to color. The 6 to 7 million cones provide the eye's color sensitivity and they are much more concentrated in the central yellow spot known as the macula. In the center of that region is the " fovea centralis ", a 0.3 mm diameter rod-free area with very thin, densely packed cones. The experimental evidence suggests that among the cones there are three different types of color reception. Response curves for the three types of cones have been determined. Since the perception of color depends on the firing of these three types of nerve cells, it follows that visible color can be mapped in terms of three numbers called tristimulus values. Color perception has been successfully modeled in terms of tristimulus values and mapped on the CIE chromaticity diagram.

Charlie Chong/ Fion Zhang


Rod and Cone Density on Retina Cones are concentrated in the fovea centralis. Rods are absent there but dense elsewhere. Measured density curves for the rods and cones on the retina show an enormous density of cones in the fovea centralis. To them is attributed both color vision and the highest visual acuity.

Visual examination of small detail involves focusing light from that detail onto the fovea centralis. On the other hand, the rods are absent from the fovea. At a few degrees away from it their density rises to a high value and spreads over a large area of the retina. These rods are responsible for night vision, our most sensitive motion detection, and our peripheral vision.

Charlie Chong/ Fion Zhang


Rod and Cone Density on Retina

Charlie Chong/ Fion Zhang


Cone Details Current understanding is that the 6 to 7 million cones can be divided into "red" cones (64%), "green" cones (32%), and "blue" cones (2%) based on measured response curves. They provide the eye's color sensitivity. The green and red cones are concentrated in the fovea centralis . The "blue" cones have the highest sensitivity and are mostly found outside the fovea, leading to some distinctions in the eye's blue perception. The cones are less sensitive to light than the rods, as shown a typical daynight comparison. The daylight vision (cone vision) adapts much more rapidly to changing light levels, adjusting to a change like coming indoors out of sunlight in a few seconds. Like all neurons, the cones fire to produce an electrical impulse on the nerve fiber and then must reset to fire again. The light adaption is thought to occur by adjusting this reset time. The cones are responsible for all high resolution vision. The eye moves continually to keep the light from the object of interest falling on the fovea centralis where the bulk of the cones reside.

Charlie Chong/ Fion Zhang


Rod Details The rods are the most numerous of the photoreceptors, some 120 million, and are the more sensitive than the cones. However, they are not sensitive to color. They are responsible for our dark-adapted, or scotopic, vision. The rods are incredibly efficient photoreceptors. More than one thousand times as sensitive as the cones, they can reportedly be triggered by individual photons under optimal conditions. The optimum dark-adapted vision is obtained only after a considerable period of darkness, say 30 minutes or longer, because the rod adaption process is much slower than that of the cones. The rod sensitivity is shifted toward shorter wavelengths compared to daylight vision, accounting for the growing apparent brightness of green leaves in twilight.

Charlie Chong/ Fion Zhang


While the visual acuity or visual resolution is much better with the cones, the rods are better motion sensors. Since the rods predominate in the peripheral vision, that peripheral vision is more light sensitive, enabling you to see dimmer objects in your peripheral vision. If you see a dim star in your peripheral vision, it may disappear when you look at it directly since you are then moving the image onto the cone-rich fovea region which is less light sensitive. You can detect motion better with your peripheral vision, since it is primarily rod vision. The rods employ a sensitive photopigment called rhodopsin.

Charlie Chong/ Fion Zhang


Keywords:  Cones are responsible for color perceptions and details  Rods are responsible for night vision, our most sensitive motion detection, and our peripheral vision.  Rods is one thousandth times more efficient photoreceptors than cones  Rods are efficient motion sensors  Rod adaptation is much slower than cones  Night vision is best at peripheral vision (not viewing the object right at the center of field of vision)

Charlie Chong/ Fion Zhang


Visual Acuity Resolution Acuity (识别视力) Recognition Acuity (识别视力) Temporal Resolution (瞬时清晰复,瞬时清晰度) Note: Temporal resolution refers to the accuracy of a particular measurement with respect to time. It is often in contest with spatial resolution which is a measure of accuracy with respect to the details of the space being measured.

Charlie Chong/ Fion Zhang


Visual Angle

Charlie Chong/ Fion Zhang


Snellen’s Acuity Fraction

Charlie Chong/ Fion Zhang


Visual Acuity: What is 20/20 Vision 20/20 vision is a term used to express normal visual acuity (the clarity or sharpness of vision) measured at a distance of 20 feet. If you have 20/20 vision, you can see clearly at 20 feet what should normally be seen at that distance. If you have 20/100 vision, it means that you must be as close as 20 feet to see what a person with normal vision can see at 100 feet. 20/20 does not necessarily mean perfect vision. 20/20 vision only indicates the sharpness or clarity of vision at a distance. There are other important vision skills, including peripheral awareness or side vision, eye coordination, depth perception, focusing ability and color vision that contribute to your overall visual ability Charlie Chong/ Fion Zhang


Approximate table of equivalent visual acuity notations for near vision

http://courses.ttu.edu/edsp5383-ngriffin/letter.htm

Charlie Chong/ Fion Zhang


Color Vision: Photopic Vision depends on: ■ ■ ■

Quantity of light Quality of light Adeptness of eye

Inspection Color Temperature: 6700ºC with full spectrum is optimum Color Deficiencies affect approximately ■ 10% of Male population. ■ Women only constituted 0.5% of those affected.

Charlie Chong/ Fion Zhang


Ishihara Plates

Charlie Chong/ Fion Zhang


Ishihara Plates

Charlie Chong/ Fion Zhang


Color Deficiencies

Charlie Chong/ Fion Zhang


Optical Illusion-Due to Contrast

Charlie Chong/ Fion Zhang


Optical Illusion- The Logvinenko illusion. Although gray diamonds are identical, there appear to be light-gray ones and dark-gray ones (LOGVINENKO, 1999).

Charlie Chong/ Fion Zhang


Optical Illusion- Due to Contrast

Charlie Chong/ Fion Zhang


Optical Illusion- A & B http://en.wikipedia.org/wiki/Optical_illusion

Charlie Chong/ Fion Zhang


Optical Illusion- The square A is exactly the same shade of grey as square B.

Charlie Chong/ Fion Zhang


Optical Illusion- In this illusion, the coloured regions appear rather different, roughly orange and brown. In fact they are the same colour, and in identical immediate surrounds, but the brain changes its assumption about color due to the global interpretation of the surrounding image. Also, the white tiles that are shadowed are the same color as the grey tiles outside the shadow.

Charlie Chong/ Fion Zhang


Optical Illusion- Simultaneous Contrast Illusion. The background is a color gradient and progresses from dark grey to light grey. The horizontal bar appears to progress from light grey to dark grey, but is in fact just one colour.

Charlie Chong/ Fion Zhang


Optical Illusion- Simultaneous Contrast Illusion. The background is a color gradient and progresses from dark grey to light grey. The horizontal bar appears to progress from light grey to dark grey, but is in fact just one colour.

Charlie Chong/ Fion Zhang


Optical Illusion – Due to Brightness Bright objects look larger than the dark objects of the same size.

Charlie Chong/ Fion Zhang


Chapter 3: Fundamental of Imaging

Charlie Chong/ Fion Zhang


Keywords:    

Plano Concavo / Convexo Convex Concave

Charlie Chong/ Fion Zhang


Keywords: Thin lens: The thickness of the lens is small compare to its focal length. The thin lens equation: 1/f = 1/d = 1/u

Charlie Chong/ Fion Zhang


Lenses and the focal lengths

Charlie Chong/ Fion Zhang


Chapter 4: Test Object Characteristics

Charlie Chong/ Fion Zhang


Keywords: Surface Features: Affected by (1) Form, (2) Waviness & (3) Roughness

Charlie Chong/ Fion Zhang


Surface Roughness with & without profile variation Profile = Form ? Waviness? Form- Variation i form or profile are typically controlled by the dimensional or geometric tolerance specifications.

Charlie Chong/ Fion Zhang


Surface Roughness Surface roughness, often shortened to roughness, is a component of surface texture. It is quantified by the vertical deviations of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. Roughness is typically considered to be the highfrequency, short-wavelength component of a measured surface (see surface metrology). However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose. Roughness plays an important role in determining how a real object will interact with its environment. Rough surfaces usually wear more quickly and have higher friction coefficients than smooth surfaces (see tribology). Roughness is often a good predictor of the performance of a mechanical component, since irregularities in the surface may form nucleation sites for cracks or corrosion. On the other hand, roughness may promote adhesion.

Charlie Chong/ Fion Zhang


Although roughness is often undesirable, it is difficult and expensive to control in manufacturing. Decreasing the roughness of a surface will usually increase exponentially its manufacturing costs. This often results in a trade-off between the manufacturing cost of a component and its performance in application. Roughness can be measured by manual comparison against a "surface roughness comparator", a sample of known surface roughnesses, but more generally a Surface profile measurement is made with a profilometer that can be contact (typically a diamond styles) or optical (e.g. a white light interferometer). However, controlled roughness can often be desirable. For example, a gloss surface can be too shiny to the eye and too slippy to the finger (a touchpad is a good example) so a controlled roughness is required. This is a case where both amplitude and frequency are important.

Charlie Chong/ Fion Zhang


A roughness value can either be calculated on a profile (line) or on a surface (area). The profile roughness parameter (Ra, Rq,...) are more common. The area roughness parameters (Sa, Sq,...) give more significant values.

Charlie Chong/ Fion Zhang


Profile roughness parameters Each of the roughness parameters is calculated using a formula for describing the surface. Although these parameters are generally considered to be "well known" a standard reference describing each in detail is Surfaces and their Measurement. There are many different roughness parameters in use, but Ra is by far the most common though this is often for historical reasons not for particular merit as the early roughness meters could only measure Ra. Other common parameters include Rz, Rq,and Rsk. Some parameters are used only in certain industries or within certain countries. For example, the Rk family of parameters is used mainly for cylinder bore linings, and the Motif parameters are used primarily within France.

Charlie Chong/ Fion Zhang


Since these parameters reduce all of the information in a profile to a single number, great care must be taken in applying and interpreting them. Small changes in how the raw profile data is filtered, how the mean line is calculated, and the physics of the measurement can greatly affect the calculated parameter. With modern digital equipment it makes sense to look at the scan and make sure there aren't some obvious glitches that are skewing the values - and if there are, to re-measure

Charlie Chong/ Fion Zhang


Keyword: Ra: Roughness average is the universally recognised and most used international parameter of roughness. It is the arithmetic mean of the absolute departures of the roughness profile from the mean line. Ra is reported in microns. http://www.finetubes.co.uk/products/technical-reference-library/tube-surface-finishes/

Ra- Arithmetic average of absolute values Average distance of the profile to the mean line - Area under the curve between the surface profile and the surface mean after applying a mathematical filter to eliminate the effect of waviness. Ra- Arithmetic average of absolute values Area under the curve between the surface profile and the surface mean after applying a mathematical filter to eliminate the effect of waviness.

Charlie Chong/ Fion Zhang


Ra- Average distance of the profile to the mean line

Charlie Chong/ Fion Zhang


Comparison of approximately same Ra value with different profile with different roughness peak Rp and roughness depth Rv http://www.olympus-ims.com/en/knowledge/metrology/roughness/2d_parameter/

Charlie Chong/ Fion Zhang


Keywords Anisotropic Surface: Periodic irregularity usually in one direction.

Charlie Chong/ Fion Zhang


Rz & Rmax

Charlie Chong/ Fion Zhang


Keywords: Anisotropic Surface- has a periodic irregularity usually in one direction

Charlie Chong/ Fion Zhang


Color & Gloss

Charlie Chong/ Fion Zhang


Color & Gloss Visual Comparison for Color Matching- The two most common systems are the (1) Natural color system and (2) Munsell color ordering system Color’s Variables: Colors order systems described colors as (1) hue, (2) value (3) saturation Hue- Chromaticness, describes color as its primary color constituents or mix of color constituents. expressed as redness, blueness and so forth Value- Described colors as lightness or darkness; Light color has high value and dark color has low value. Saturation- Measure of distance from natural corresponding color. It is often referred as color strength or intensity.

Charlie Chong/ Fion Zhang


Natural Color System

Charlie Chong/ Fion Zhang


Natural Color System

Charlie Chong/ Fion Zhang


Natural Color System

Charlie Chong/ Fion Zhang


Natural Color System

Charlie Chong/ Fion Zhang


Charlie Chong/ Fion Zhang


Munsell Color System

Charlie Chong/ Fion Zhang


Geometry Datum Reference: X, Y, Z

Charlie Chong/ Fion Zhang


Geometric Tolerances

Charlie Chong/ Fion Zhang


Section 2: Material Science Basics and Visual Testing Applications Chapter 5: Types of Materials to be Tested

Charlie Chong/ Fion Zhang


Metal Cells → Crystals

Charlie Chong/ Fion Zhang


Metal

Charlie Chong/ Fion Zhang


Keywords:      

Atoms Cells Crystals Allotropic- Metal exhibits more than one cell structures Macroscopic evaluation- 10X magnifications or less Microscopic evaluation- >10X magnifications (50X ~ 200X)

Charlie Chong/ Fion Zhang


Mechanical Properties

Charlie Chong/ Fion Zhang


Keywords: Electrochemical Nature of Corrosion: General corrosion, Crevice corrosion and Galvanic corrosion are cause by the same mechanism.

Charlie Chong/ Fion Zhang


Chapter 6: Visual & Optimal Testing Applications

Charlie Chong/ Fion Zhang


Keywords: Metal Working Processes  Primary forming processes  Secondary forming processes  Finishing processes  Joining processes  Service

Charlie Chong/ Fion Zhang


ď Ž Metal Casting http://thelibraryofmanufacturing.com/metalcasting_basics.html

Charlie Chong/ Fion Zhang


Metal Casting

Charlie Chong/ Fion Zhang


ď Ž

Forming processes

Metal Manufacturing- Metal Rolling http://thelibraryofmanufacturing.com/metal_rolling.html

Charlie Chong/ Fion Zhang


ď Ž Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Secondary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž

Primary forming processes - Metal Rolling

Charlie Chong/ Fion Zhang


ď Ž Secondary forming processes

Charlie Chong/ Fion Zhang


ď Ž

Secondary forming processes

Charlie Chong/ Fion Zhang


ď Ž Secondary forming processes

Charlie Chong/ Fion Zhang


ď Ž

Finishing forming processes

Charlie Chong/ Fion Zhang


ď Ž

Finishing processes

Charlie Chong/ Fion Zhang


ď Ž

Finishing processes

Charlie Chong/ Fion Zhang


ď Ž

Finishing processes

Charlie Chong/ Fion Zhang


ď Ž Joining Process

Charlie Chong/ Fion Zhang


ď Ž Joining Process

Charlie Chong/ Fion Zhang


ď Ž Joining Process

Charlie Chong/ Fion Zhang


ď Ž Services

Charlie Chong/ Fion Zhang


ď Ž Services

Charlie Chong/ Fion Zhang


ď Ž Services

Charlie Chong/ Fion Zhang


Section 3: Inspection Planning & Equipment Chapter 7: Inspection Planning & Visual Inspection Tools

Charlie Chong/ Fion Zhang


Profilometer

Charlie Chong/ Fion Zhang


Profilometer

Charlie Chong/ Fion Zhang


Section 4: Documentation & Analysis Chapter 8: Documentation of Visual Testing

Charlie Chong/ Fion Zhang


Replication One of the purpose of performing in situ replication is to determine the extent of thermal degradation or thermal aging from the microstructure appearance. Prolonged exposure to high temperature will cause microstructures to decompose and eventually result in creep cracking. By replication technique, microstructure can be obtained at site nondestructively to safely judge the condition of the component. The results obtained can be used to identify previous heat treatment process and to verify the required temperature setting for post weld heat treatment (PWHT) for repair work purposes, and as a reference for future inspection and maintenance work arrangement. The processes of producing replica at site are based on international code and standard as follow:

Charlie Chong/ Fion Zhang


The processes of producing replica at site are based on international code and standard as follow: a. ASTM E3: Standard Guide for Preparation of Metallographic Specimens b. b. ASTM E407: Standard Practice for Microetching Metals and Alloys c. c. ASTM E1351: Standard Practice for Production and Evaluation of Field Metallographic Replicas d. ASTM E1558: Standard Guide for Electrolytic Polishing of Metallographic Specimens

Charlie Chong/ Fion Zhang


In-situ Metallographic Replication

Charlie Chong/ Fion Zhang


In-situ Metallographic Replication

Charlie Chong/ Fion Zhang


In-situ Metallographic Replication

Charlie Chong/ Fion Zhang


The techniques: A standardized technique (ASTM E 1351, ISO 3057) which can be implemented on most metallic materials using portable polishing and etching devices and a field optical microscope. The procedure to carry out metallographic replicas includes at least five stages 1. Local grinding to eliminate surface layers (paint, decarburised layers, oxidation‌) 2. Mechanical polishing using abrasive papers and diamond paste 3. Chemical or electrolytic etching of the polished area to reveal the microstructure 4. Replication of the microstructure with a cellulose acetate film 5. Observation of the structure with an optical microscope or a scanning electron microscope

Charlie Chong/ Fion Zhang


The End Charlie Chong/ Fion Zhang


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.