800.331.9360 MIDSOUTHRUBBER.COM
About us The Rubber House has been serving wholesale distributors for over 30 years. Our commitment to your success is our main goal, providing you with fast service and quality products while increasing your bottom line profits. Adding value to our quality products, such as, hose and fittings, conveyor products, and customized fabricated products is our main focus.
Products and Services We provide top brand name products of conveyor belting, conveyor products, industrial hose and couplings, fabricated conveyor services, and all types of rubber products.
We perform services, such as, customized belt slitting and fabrication, sidewall fabrication, belt vulcanizing, made to length hose and coupling assemblies, and these other specialty fabricated request:
Conveyor belt lacing and endless splices
Hole and bucket punching for elevator configurations
Custom belt fabrications
Customized hose cut-to-length services
And others
Call one of our knowledgeable team members today for more information.
Heavyweight Belt
04 - 05
Lightweight Belt
06 - 10
Skirt Board Rubber and Clamps
11
Head and Tail Pulleys
12
CEMA Rated Idlers
13
Conveyor Guard Panels
14
Belt Fasteners
15
Impact Beds
16
Belt Cleaners
17
Belt Plows
18
Elevator Buckets and Fasteners
19
Industrial Rubber Hose
20
PVC Hose
20
Air/Water Hose
21
Duct Hose
21
Tank Truck Hose
22
Food and Beverage Hose
22
Coupled Hose Assemblies
23
Fittings, Couplings and Clamps
23
Abbreviation Key BB - Bare Back
FS - Friction Surface
PVC - Polyvinyl Chloride
CBS - Cover Both Sides
MOR -Moderate Oil Resistant
PU - Polyurethane
CEMA - Conveyor Equipment Manufactures Association
MSHA - Mine Safety Health Act
RT - Rough Top
OR - Oil Resistant
SBR - Styrene, Butadiene Rubber
COS - Cover One Side CT - Crescent Top
PIW - Per Inch of Width
Rock Pro 2-Ply Standard Black Rubber Grade - II
Items # 10
2 Ply 220 PIW 1/8” x 1/16” 2 Ply 220 PIW 3/16” x 1/16”
Rock Pro 3-Ply Standard Black Rubber Grade - II
Items # 20
3 Ply 330 PIW 3/16” x 1/16” 3 Ply 330 PIW 1/4” x 1/16”
Rock Pro 4-Ply Standard Black Rubber Grade - II
Items # 30
4 Ply 440 PIW 1/4” x 1/16” 4 Ply 440 PIW 1/4” x 1/16”
Rip Pro Single Ply (HIGH IMPACT) Grade - I
Items # 40
1 Ply 330 PIW 1/4” x 1/8” 1 Ply 440 PIW 1/4” x 1/8”
Rip Pro Double Ply (HIGH IMPACT) Grade - I 2 Ply 330 PIW 3/8” x 3/32” 2 Ply 440 PIW 3/8” x 1/8”
Items # 50
Wood Pro 2 & 3-Ply MOR Black Rubber 2 2 3 3
Ply Ply Ply Ply
220 220 330 330
PIW PIW PIW PIW
1/8” x 1/16” 3/16” x 1/16” 1/8” x 1/16” 3/16” x 1/16”
Wood Pro 2 & 3-Ply MOR Bare Back 2 2 3 3
Ply Ply Ply Ply
220 220 330 330
PIW PIW PIW PIW
Item # 60 & 65
Item # 70 & 75
1/8” x BB 3/16” x BB 1/8” x BB 3/16” x BB
Asphalt Pro 2 & 3-Ply 350° Nitrile Belt
Item # 80 & 85
2 Ply 220 PIW 3/16” x 1/16” 3 Ply 330 PIW 3/16” x 1/16”
Fibro Heat 3 -Ply 1000° Fiberglass Woven
Item # 90
3 Ply 330 PIW 1/4” x 1/8”
Hot Pro 2 & 3 -Ply 400° Hot Belt 2 Ply 220 PIW 3/16” x 1/16” 3 Ply 330 PIW 1/4” x 1/16”
Item # 100 & 110
2 & 3-Ply Black Rubber V -Cleat Grade - I
Item # 200 & 205
2 Ply 220 PIW 1/8” x 1/16” 3 Ply 330 PIW 3/16” x 1/16”
2 & 3-Ply MOR Black V-Cleat Grade - I
Item # 220 & 225
2 Ply 220 PIW 1/8” x 1/16” 3 Ply 330 PIW 3/16” x 1/16”
2 & 3-Ply MOR Black V-Cleat Bare Back Grade - I
Item # 300 & 310
2 Ply 220 PIW 3/16” x BB 3 Ply 330 PIW 3/16” x BB
2-Ply Diamond Top Bare Back Grade - I
Item # 400
2 Ply 150 PIW (Tan)
2-Ply Diamond Top Bare Back Grade - I 2 Ply 150 PIW (Black)
Item # 500
3-Ply Diamond Top Bare Back Grade - I
Item # 600
3 Ply 225 PIW (Tan)
2 & 3 Ply Pure Gum Rough Top x Bare
Item # 700 & 705
2 Ply 160 PIW (Tan) 3 Ply 240 PIW (Tan)
2 Ply Carboxilated Nitrile Rough Top x Bare Back
Item # 800
2 Ply 160 PIW (Brown)
3 Ply Carboxilated Nitrile Rough Top x Bare Back
Item # 900
3 Ply 240 PIW (Blue)
2 Ply Rough Top Rubber x Bare Back 2 Ply 160 PIW (Black)
Item # 930
3 Ply Black Ribflex
Item # 940
3 Ply PIW x FS
3 Ply Sana-White Nitrile COS 3Ply PIW x FS
3 Ply Pebble Top White Nitrile COS
Item # 1100
Item # 1200
3 Ply PIW x FS
3 Ply Meat Cleat White Nitrile COS 3 Ply PIW x FS
PVC Black Crescent Top COS 120 PIW x FS 200 PIW x FS
Item # 1300
Item # 2100
PVC Rough Top COS 120 PIW x FS (Green)
PVC Grip Pro COS 200 PIW x FS (Red)
PVC Surface Black CBS 120 150 200 250 350
PIW PIW PIW PIW PIW
PIW PIW PIW PIW PIW
Item # 2300
Item # 2000
CBS CBS CBS CBS CBS
PVC Surface Black COS 120 150 200 250 350
Item # 2200
Item # 2050
CBS CBS CBS CBS CBS
PVC Rough Top Black COS 120 PIW RT x BB 150 PIW RT x BB 200 PIW RT x BB
Item # 2400
Zip-link Rough Top Bare Back
Item # 3000
150 PIW Blue x BB
Hot Stock and Water Bare Back 4 Ply
Tan Transmission Bare Back
Item # 4000
Item # 5000
3 Ply 120 PIW XM x BB
PVC White Smooth Top Brush Bottom
Item # 6000
100 PIW X BB
PVC White Cleated Brush Bottom 100 PIW x BB
Item # 6100
Available in 4”, 5”, 6”, 8”, 10”, and 12” 60 Durometer Commonly used for guiding material on conveyor belt to prevent spillage, lining chutes, troughs and hoppers.
1/8” Thick, .070 lbs. PIW, Temp Range: -20ºF to 121ºF
1/4” Thick, .140 lbs. PIW, Temp Range: -20ºF to 121ºF
3/8” Thick, .210 lbs. PIW, Temp Range: -20ºF to 121ºF
1/2” Thick, .270 lbs. PIW, Temp Range: -20ºF to 121ºF
3/4” Thick, .410 lbs. PIW, Temp Range: -20ºF to 121ºF
1” Thick, .540 lbs. PIW, Temp Range: -20ºF to 121ºF
80 Durometer Commonly used to produce belt scrappers.
1/2” Thick, .270 lbs. PIW, Temp Range: -20ºF to 121ºF
3/4” Thick, .410 lbs. PIW, Temp Range: -20ºF to 121ºF
1” Thick, .540 lbs. PIW, Temp Range: -20ºF to 121ºF
Features and Benefits:
Strong restraining bar that is held in place by clamp plates to allow easy adjustment of skirt rubber safely from the sides of the conveyor
Anti-vibration clamp pin can be unlocked with a rubber hammer
Comes in standard 6’ (1800 mm) modules that can be modified for shorter length requirements
Made of sturdy steel construction with corrosion-resistant powder coat finish
Unique captive wedge mechanism that ensures no parts get lost Easy to install and maintain –– one person can reposition worn skirt rubber in minutes
Options:
Available in two models –– standard Flex-Lok with an overall height of 8" (203 mm) and Mini Flex-Lok with an overall height of 5½ " (135 mm)
Standard Flex-Lok available in stainless steel
Applications:
For heavy-duty applications experiencing load zone spillage For skirt rubber from 5/16" – 1" (8 – 25 mm) thick
CEMA Rated
CEMA Rated
Wing Pulley
Drum Pulley
Diameter: 6” to 60” Contact bar thickness: 1/4” x 1-1/2” minimum, but also offered in 3/8” and 5/8” x 1-1/2” Standard Face Widths: 12” to 78”
Diameter: 4” to 60” Integral Hub Diameter: 12” and under Standard Face Widths: 12” to 78”
Mine Duty 2.0
Mine Duty 1.5
Wing Pulley
Drum Pulley
Diameter: 8” to 60” Contact bar thickness: 5/8” x 1-1/2” minimum Standard Face Widths: 12” to 78”
Diameter: 10” to 60” Integral Hub Diameter: 12” and under Standard Face Widths: 12” to 78”
Super Duty
Mine Duty 2.0
Wing Pulley
Drum Pulley
Diameter: 10” to 60” Contact bar thickness: 3/4” x 2” minimum Standard Face Widths: 12” to 78”
Diameter: 10” to 60” Integral Hub Diameter: 12” and under Standard Face Widths: 12” to 102”
CEMA Chevron®
Super Duty
Wing Pulley
Drum Pulley
Diameter: 10” to 20” Contact bar thickness: CEMA: 1” x 1/2” half round bar Available in CEMA, mine and super duty construction Standard Face widths: 12” to 63”
Diameter: 10” to 60” Integral Hub Diameter: 12” and under Standard Face Widths: 12” to 102”
Are you looking for different configurations? We’ve got you covered! Other thicknesses available on request Cold Bond rubber lagging available on request Other lagging styles available on request Call for more information
Equal Troughing, Moxie Rolls, Unequal Troughing, CB504 Series, Feeder/Picking, Channel Mount Low Profile, Impact, Offset Center Roll, Wire Rope, Variable Pitch, V-Return, Self-Aligner, Self-Aligning Return, Live Shaft Rollers, Beater Bar Return, Flat Carrier Idler, Rubber Cushion Flat Carrier, Return, Rubber Disc Return, Urathon Return Roll, Spiral Urathon Return Roll, Garland
The Broadest Range of Conveyor Idlers on the Market (CEMA B, C, D, E and F) Spin Guard® Seal Technology
High Quality Construction
Bullet proof idler bearing protection
Grease-filled triple labyrinth seal shuts out contaminants
Thick or thicker steel construction compared to other brands
Two year complete components warranty
Economical Retrofit Rolls
Slotted shafts fit most competitor frames
Hex nut adapter available for hex nut style brackets
Number
Description
Lengths
14-000946
5’
10-002139
5’
Features and Benefits
Attaches with self-tapping screws and washers
Features and Benefits
Can be used on channel or truss frames
Cuts easily to any size or shape, with shears or cutter
10’ x 5’ or 4’ x 5’ panels
UV resistant HDPE
Shipped with self-tapping screws and washers
3/4” mesh (50’ x 4’ roll)
1/4” mesh (100’ x 4’ roll)
Number 38-000030 38-000032
Description
Lengths 4’
-
4’
Rivet Solid Plate
Rivet Hinged
Ideal for pulley diameters as small as 14”, the 6-rivet pattern provides a staggered, multiple-point rivet to allow rivets to pass through carcass fibers without severing them for maximum resistance to pull-out. The Scalloped Edge™ provides a lower profile to extend belt splice life.
The Flexco® SR™ Scalloped Edge™ fastener features a low profile, reducing the fastener’s exposure to cleaner blades, skirt rubbers, and return idlers. Reduced wear and tear on the fastener extends the life of the splice to maximize belt availability.
Bolt Solid Plate Bolt Solid Plate fasteners are engineered to meet the demands of the toughest material handling applications, providing a strong, sift-free splice with superior holding ability. A choice of sizes accommodates belts from 3/16” (5 mm) to over 15/16” (24 mm) thick.
Bolt Hinged For belts operating over smaller pulleys, such as in construction equipment and road machinery, Flexco® Bolt Hinged fasteners are a smart, easy-to-install solution. They use a combination of penetration and compression to deliver strength and reliability.
Alligator
Alligator Staple
Alligator® Lacing is available in continuous lengths to fit any belt width and provides uniform tension across the full belt width. The one-piece fastener strip also ensures that there are no loose pieces to work themselves out of the belt and into the conveyed product.
The Alligator® Ready Set™ Staple Fastener System is ideal for a wide variety of light- and medium-duty fastener applications. The system features onepiece fastener strips with pre-inserted staples that speed installation and keep downtime to a minimum.
Wire Hooks The double-staggered grip pattern gives wire hooks exceptional holding power without degrading the integrity of the belt carcass. Today’s splices also have a very low profile, making them increasingly more compatible with conveyor components and compliant for reduced operating noise
Wrenches, Drivers, Punches and other tools also available.
Call for more details!
Save the Belt
Energy absorbing impact bars protect belting from falling material
Bars made of low-friction UHMW and high impact SBR rubber
Rugged Construction
Rigid, structurally sound frame for extra support Custom engineered style available on request
Perfect Fit
Belt Widths: 24”- 72”
Wings adjust to 20°, 30° and 45° Standard or medium duty construction
High Capacity Applications
Diameter: 5” or 6” Existing Roller
Lengths: 4’ or 5’
Common Applications
Large Material Lumps Sharp, Damaging Material
Extended Discharge Height
Conveyor Belt Cleaners are specially designed to help keep your conveyors running efficiently and consistently, so you reduce maintenance costs, work safer, and save money. From precleaner and secondary cleaners to specialty cleaners developed for select applications, we have numerous options to help you.
Many Styles and Sizes Available!
Reduces belt mistracking. Material build-up on a pulley causes belt mistracking problems which can lead to other problems on the conveyor. Belt plows removes those materials before they get into the pulley and begin building up.
Discharges to either side of the belt. The plow can be angled to discharge materials to either side of the belt, making it as convenient as possible for cleanup.
Can be used anywhere on the beltline. Belt plows can be installed on the side of the return belt anywhere there is a problem with materials falling onto the belt. In most applications, it’s installed just behind the head pulley to dump carryback before it travels down Belt plows clean the belt in front of the tail the beltline. pulley. It keeps lumps, rocks and other fugitive Economical. Durability and budget-conscious pricing make the Diagonal Plow very versatile.
Many Styles and Sizes Available!
materials out of the tail pulley where they could cause damage to the belt, the mechanical splice, lagging or pulley. This is the versatile, economical solution for protecting the tail pulley, drive pulley, or gravity take-up pulleys from carryback materials.
Available Styles
Polyethylene
Low Profile Polyethylene
Steel
Seamless Steel
Fabricated Steel
Iron
Urethane
Nylon
Bottomless
Multiple Colors
Bolt Styles
Bolt Sizes
Stainless Steel
1/4” x 3/4”
5/16” x 3/4”
Carbon Steel
1/4” x 1”
5/16” x 1”
Zinc Plated
1/4” x 1-1/4”
5/16” x 1-1/4”
Sabre Tooth
1/4” x 1-1/2”
5/16” x 1-1/2”
#1 Norway
1/4” x 1-3/4”
5/16” x 1-3/4”
1/4 x 2”
5/16” x 2”
Nut Types
Washers Types
Available Sizes
Square
Flat
1/4”
Standard Flange
Split Ring Lock
5/16”
Large Flange
Fender
Nylon Insert Lock
External Tooth Lock
Square
Leather
*Other sizes by Request*
Multi-Purpose Air/Water Hose
Push-Lock Hose
A durable, quality and economical hose. This general purpose hose is used in a variety of air and water applications for the industrial, agricultural, and construction fields. I.D. O.D. P.S.I. Cover Material: EPDM - limited oil and ozone resistant. 0.25 in 0.62 in 300 0.37 in 0.72 in 300 Reinforcement: Spiral polyester yarn. 0.50 in 0.84 in 300 0.62 in 1.00 in 300 Tube Material: EPDM – Medium oil resistance. 0.75 in 1.16 in 300 1.00 in 1.44 in 300 Temperature Range: -40ºF (-40ºC) to 200ºF (+90ºC) 1.25 in 1.75 in 200 NOT INTENDED FOR USE AS A STEAM HOSE. 1.50 in 2.00 in 200 Wide range of applications where performance and ease of assembly are demanded. No clamps or ferrules required when using Push-On fittings. Cover Material: Synthetic rubber, oil, flame and abrasion resistant. Available in multiple colors.
I.D. 0.25 in 0.37 in 0.50 in 0.63 in 0.75 in
Reinforcement: Braided textile - angled for push-on fitting. Tube Material: Nitrile – RMA Class A oil resistance. Temperature Range: -30ºF (-34ºC) to 180ºF (+82ºC)
General Purpose PVC Hose
*P.S.I. at 70ºF & 122ºF temperatures*
PVC tube and sturdy clockwise PVC helix with high tensile strength polyester yarn reinforcement makes this hose excellent for heavy duty water suction and transfer. I.D. O.D. P.S.I. Cover Material: PVC. Reinforcement: PVC Helix with high tensile strength polyester yarn. Tube Material: Double-ply PVC. Temperature Range: -13ºF (-25ºC) to +140ºF (+60ºC)
PVC Layflat Hose
A general purpose PVC water discharge hose. Features a balanced polyester yarn spiral wrap, longitudinal strength member and homogeneous PVC tube and cover to prevent separation. Cover Material: Homogeneous PVC. Reinforcement: Polyester yarn spiral wrap. Tube Material: Homogeneous PVC. Temperature Range: -5ºF (-20ºC) to 170ºF (+76ºC)
EPDM Suction Hose
P.S.I. 300 300 300 300 300
A general purpose PVC air and water hose for in plant and outdoor applications in temperate climate conditions. I.D. O.D. P.S.I. 0.25 in 0.50 in 300/150 Cover Material: Excellent abrasion resistant PVC compound. 0.37 in 0.62 in 300/150 Available in multiple colors. 0.50 in 0.75 in 300/150 0.62 in 0.86 in 200/100 Reinforcement: High tensile strength yarn. 0.75 in 1.03 in 200/75 Tube Material: Black PVC compound. 1.00 in 1.31 in 150/75 Temperature Range: -14ºF (-10ºC) to 150ºF (+65ºC)
Heavy Duty PVC S&D Hose
O.D. 0.48 in 0.61 in 0.77 in 0.89 in 1.02 in
1.50 in 2.00 in 2.50 in 3.00 in 4.00 in 6.00 in 8.00 in 10.00 in
2.03 in 2.60 in 3.01 in 3.70 in 4.78 in 7.17 in 9.34 in 11.63 in
100 100 100 100 80 70 60 40
I.D. 0.76 in 1.02 in 1.29 in 1.61 in 2.09 in 3.07 in 4.09 in 6.10 in 8.17 in
O.D. 0.75 in 1.00 in 1.25 in 1.50 in 2.00 in 3.00 in 4.00 in 6.00 in 8.00 in
P.S.I. 100 85.0 85.0 65.0 65.0 60.0 60.0 40.0 40.0
Septic, waste water and liquid manure handling; agricultural liquid fertilizers and standard duty water suction, as well as suction and transfer for rental, construction and trash pumps. Cover Material: EPDM rubber. Reinforcement: Polyethylene helix. Tube Material: EPDM rubber. Temperature Range: -40ºF (-40ºC) to +140ºF (+60ºC)
I.D. 1.50 in 2.00 in 3.00 in 4.00 in
O.D. 1.85 in 2.43 in 3.52 in 4.60 in
P.S.I. 50 50 45 38
Hot Tar and Asphalt Hose
An excellent hose for the transfer of high temperature hot tar, asphalt, and other petroleum based materials in suction and delivery services. Cover Material: Black CSM - abrasion, ozone and hot tar resistant. Reinforcement: High tensile textile cords with steel helix wires. Tube Material: Black NBR - hot tar and asphalt resistant. Temperature Range: -4ºF (-20ºC) to 356ºF (+180ºC)
I.D. 2.00 in 3.00 in 4.00 in
O.D. 2.72 in 3.78 in 4.80 in
P.S.I. 150 150 150
Dredge Sleeve
A very heavy hose intended for the severe service of discharge lines on dredges. Cover Material: Weather resistant SBR. Reinforcement: Multiple plies of all-polyester belt fabrics. Tube Material: Abrasion resistant SBR. Available in 3/8” , 1/2" or 3/4" tube gauges. Temperature Range: -25ºF (-32ºC) to +180ºF (+82ºC)
Pipe Size 4” 6” 8” 10” 12”
I.D. 4.50 in 6.62 in 8.62 in 10.75 in 12.75 in
O.D. 6.0 - 6.8 in 8.3 - 9.1 in 10.6 - 11.3 in 12.9 - 13.6 in 15.1 - 15.9 in
Used on the suction end of dredges. It provides flexible connections between dredging lines and pumps.
Sand Suction Hose
Cover Material: Abrasion resistant SBR. Reinforcement: Multiple plies of all-polyester belt fabrics with a tough spring steel wire. Tube Material: Abrasion resistant SBR. Available in 1/2" or 3/4" tube gauges. Temperature Range: -25ºF (-32ºC) to +180ºF (+82ºC)
Pipe Size 4” 6” 8” 10” 12”
Two-ply smooth silicone-coated polyester fabric hose with helicallywound spring steel wire for flexibility. Double continuous-filament, silicone-coated fiberglass cord for durability. Cover Material: Two-ply smooth silicone-coated polyester fabric. Reinforcement: Helically-wound spring steel wire. Tube Material: Double silicone-coated fiberglass cord. Temperature Range: -80ºF (-62ºC) to 600ºF (+361ºC) Neoprene-coated two-ply polyester ducting for dust collection, air movement, fume control and light material handling. Cover Material: Neoprene-coated. Reinforcement: Double-ply polyester construction. Temperature Range: -65ºF (-54ºC) to 250ºF (+127ºC) Standard packaging: 25' lengths in cartons.
Superior design provides better internal and external abrasion. Excellent ozone, weathering, chemical and moisture resistance. Cover Material: Black thermoplastic rubber (TPR) elastomer. Reinforcement: Helical wire reinforced. Temperature Range: -60˚F (-51˚C) to +275˚F (+135˚C) Standard packaging: 25' lengths in cartons.
I.D. 4.50 in 6.62 in 8.62 in 10.75 in 12.75 in
O.D. 6.0 - 6.8 in 8.3 - 9.1 in 10.6 - 11.3 in 12.9 - 13.6 in 15.1 - 15.9 in
I.D. 1.00 in 1.50 in 1.75 in 2.00 in 2.50 in 3.00 in 4.00 in 5.00 in 6.00 in 8.00 in
O.D. 1.14 in 1.64 in 1.89 in 2.14 in 2.64 in 3.14 in 4.14 in 5.14 in 6.14 in 8.14 in
P.S.I. 60.0 55.0 55.0 50.0 45.0 45.0 40.0 35.0 30.0 15.0
I.D. 1.50 in 2.00 in 2.50 in 3.00 in 4.00 in 6.00 in 8.00 in 10.00 in 12.00 in 16.00 in
O.D. 2.60 in 3.50 in 4.00 in 5.00 in 6.50 in 9.00 in 10.00 in 11.00 in 13.50 in 18.50 in
P.S.I. 32.0 30.0 28.0 25.0 23.0 21.0 19.0 18.0 17.0 15.0
I.D. 2.00 in 2.50 in 3.00 in 4.00 in 5.00 in 6.00 in 8.00 in 10.00 in 12.00 in
O.D. 2.04 in 2.54 in 3.04 in 4.04 in 5.04 in 6.04 in 8.04 in 10.04 in 12.04 in
P.S.I. 24.0 24.0 24.0 24.0 15.0 9.0 8.0 6.0 4.0
Silicone Ducting Hose
Neoprene Ducting Hose
Thermoplastic Ducting Hose
Chemical S&D Hose
Suction and transfer service for a variety of chemicals and solvents. Will handle 90% of existing chemicals. Cover Material: SBR/EPDM - abrasion and ozone resistant. Reinforcement: High tensile textile cords and 4 highly flexible steel helix wires. Tube Material: Transparent XLPE or UHMW Temperature Range: -4ºF (-20ºC) to 150ºF (+65ºC)
Petroleum Tank Truck Hose
I.D. 0.75 in 1.00 in 1.25 in 2.00 in 3.00 in 4.00 in
O.D. 1.22 in 1.46 in 1.97 in 2.48 in 3.62 in 4.65 in
P.S.I. 240 240 240 240 240 240
For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum -based products with up to 50% aromatic content. Cover Material: CR - abrasion, ozone and hydrocarbon resistant. Reinforcement: High tensile textile cords and highly flexible steel helix wires. Tube Material: Black conductive NBR. Temperature Range: -22ºF (-30ºC) to 176ºF (+80ºC)
PVC Tank Truck Hose
I.D. 1.50 in 2.00 in 3.00 in 4.00 in
O.D. 1.89 in 2.40 in 3.46 in 4.57 in
P.S.I. 150 150 150 150
For deliver of gasoline, diesel fuel, kerosene and other fuels with aromatic content to 40%. Cover Material: NBR/PVC with embedded Safety Ohm ground wire. Reinforcement: High tensile textile cord and highly flexible PVC helix. Tube Material: NBR/PVC Temperature Range: -10°F (-23°C) to +140°F (+60°C)
Potable Water Hose
O.D. 2.68 in 3.68 in 4.80 in
P.S.I. 70 65 65
Discharge of water used for drinking. Most often used for temporary water lines in construction and industrial applications. Cover Material: SBR/EPDM - abrasion and ozone resistant. Reinforcement: High tensile textile cords. Tube Material: White NBR. Meets FDA requirements. Temperature Range: -22ºF (-30ºC) to 176ºF (+80ºC)
Food & Beverage Hose
I.D. 2.00 in 3.00 in 4.00 in
I.D. 1.50 in 2.00 in 2.50 in 3.00 in 4.00 in
O.D. 1.97 in 2.56 in 3.03 in 3.62 in 4.65 in
P.S.I. 150 150 150 150 150
Food and alcoholic beverage suction and discharge hose. Specially designed for wine, beer and spirits, up to 95 proof. Cover Material: EPDM - abrasion and ozone resistant. Reinforcement: High tensile textile cords with nylon helix. Tube Material: Nontoxic chlorobutyl rubber. Meets FDA and 3A requirements. Temperature Range: -22ºF (-30ºC) to 176ºF (+80ºC)
Food Transfer Hose
I.D. 1.00 in 1.50 in 2.00 in 3.00 in
O.D. 1.46 in 2.05 in 2.64 in 3.70 in
P.S.I. 240 240 240 240
Liquid, fatty, oily food and alcoholic beverage (max 75 proof) suction and delivery. Hose may be sterilized with 5% soda solution. Cover Material: NBR/PVC blended rubber. Reinforcement: Spiraled high tensile textile cords, and 4 highly flexible steel helix wires. Tube Material: White NBR. Meets FDA and 3A requirements. Temperature Range: -22ºF (-30ºC) to 176ºF (+80ºC)
I.D. 2.00 in 3.00 in
O.D. 2.48 in 3.46 in
P.S.I. 150 150
Air Hose Assemblies
High quality flexible PVC compounds are uniquely blended to make this hose stay flexible at low temperatures. Its light weight makes it an ideal hose for air tool applications.
25’, 50’, 100’ assembly lengths
Cover Material: PVC compound.
I.D. 0.25 in 0.37 in 0.50 in 0.34 in 1.00 in
Reinforcement: Spiral polyester yarn with additional longitudinal yarns. Tube Material: Black EPDM. Temperature Range: -15°F (-26°C) to +150°F (+65°C)
O.D. 0.50 in 0.62 in 0.81 in 1.12 in 1.41 in
P.S.I. 300 300 300 250 250
A durable quality hose to tackle the rugged application of jackhammer service. The cover and tube are made of EPDM to resist ozone, heat and cracking while in service.
Jackhammer Hose Assemblies
Cover Material: Red abrasion and ozone resistant EPDM.
50’ assembly lengths
Reinforcement: Spiral polyester yarn. Tube Material: Black EPDM.
I.D. 0.75 in
Temperature Range: -40ºF (-40ºC) to 200ºF (+93ºC)
O.D. 1.02 in
P.S.I. 300
Double jacket contractor grade assemblies with male and female aluminum rocker lug couplings. Water and mildew-resistant cover, will not rot, even if the hose is stored wet.
Mill Discharge Hose Assemblies
50’ assembly lengths
Cover Material: Double jacket 100% polyester yarn. I.D. 1.50 in 1.50 in 2.50 in 2.50 in
Tube Material: Natural rubber. Temperature Range: -25° F (-31° C) to 185° F (+85° C) NOT INTENDED FOR USE AS A FIRE HOSE.
Thread NST NPSH NST NPSH
P.S.I. 200 200 200 200
For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum based products with up to 50% aromatic content. 25’, 50’, 100’ assembly lengths Cover Material: CR – abrasion, ozone and hydrocarbon resistant.
I.D. 2.00 in 2.50 in 3.00 in 4.00 in 6.00 in 8.00 in
Reinforcement: Textile cords and flexible steel helix wires. Tube Material: Black conductive NBR. Temperature Range: -22°F (-30°C) to 176°F (+80°C)
O.D. 2.40 in 2.95 in 3.46 in 4.57 in 6.69 in 8.86 in
Cam and Groove Fittings
Push-Lock Fittings
Chicago Couplings
Worm Drive Clamps
T-Bolt Clamps Double Bolt Clamps
Hose Menders
Combination Nipples
Shank Couplings
AND MORE
P.S.I. 150 150 150 150 150 150
Tank Truck Hose Assemblies
000000000000
Responding quickly to your needs is what we take pride in. Assisting you in helping your customer is our top priority. The Rubber House feels that we are an extension of our customers. This makes us look forward to helping you provide knowledgeable information, quick responses, and top quality products to your customers.