200 Varick Street New York, NY 10014 www.dtex.com 212.886.8100 Office 212.886.8111 Facsimile
Date: Project Name: Attention:
I, Deidre Hoguet, declare to the USGBC that the products listed below, distributed by Designtex, conform to the following specification requirements for LEED version 3:
MR Credit 4: Recycled Content
Product name
Manufacturers Name
Acacia 2843
Designtex Vendor
Product cost [$] per yard
Yards purchased
Total cost [$]
% Postconsumer
Total value of postconsumer content [$]
% Preconsumer
Total value of preconsumer content [$]
22%
[total$ x % post]
78%
[total$ x % pre]
MR Credit 5: Regional Materials
Product name
Acacia 2843
Manufacturer’s Name
Designtex Vendor
Product cost [$] per yard
Yards purchased
Total cost [$]
Distance btwn project & manufacturer (miles)
N/A*
Total cost [$] of regionally manufactured
materials
Distance btwn project & extraction site (miles)
Total cost [$] of regionally extracted
materials
N/A
*Note that for Upholstery, Panel, Drapery, and Cubicle curtains, the final manufacturing location is the furniture maker or drapery workroom. Therefore Designtex only supplies this information for Wallcovering (which is the final product shipped to the site).
MR Credit MR 6: Rapidly Renewable Materials
Product name
Manufacturers Name
Acacia 2843
Designtex Vendor
Product cost [$] per yard
Yards purchased
Supporting Documentation: Attached are backup documents, including: • Product Data/Product Cut Sheets
Sincerely,
Deidre Hoguet, Manager, Environmental Strategy
Total cost [$]
% Rapidly Renewable
Total value of rapidly renewable materials [$]
0%
[total$ x %RR]
DESIGNTEX PRODUCT INFORMATION – UPHOLSTERY
STYLE:
Acacia
STYLE NUMBER:
2843
CONTENT:
100% Recycled Polyester
WEIGHT:
16.92 oz./ ln.yd.
WIDTH:
54”
FINISH:
Crypton Green
BACKING:
None
PERFORMANCE DATA
FLAMMABILITY TESTING:
Pass* - Test Method – California Technical Bulletin 117, Section E. Class I – Test Method – NFPA 260 (UFAC). When combined with Appropriate components can pass California Technical Bulletin #133, NY and NJ Port Authority and Boston Fire Code assembly tests.
DURABILITY:
60,000 Double Rubs* - Test Method –Wyzenbeek Abrasion ASTM 4157
STRENGTH:
Seam slippage – 25 lbs., minimum, warp and filling* Test Method – ASTM D3597 Tensile Strength – 50 lbs., minimum, warp and filling* Test Method – ASTM D3597
PILLING:
Class 3-4 Rating, minimum* Test Method – ASTM D3511
COLORFASTNESS:
Light – Class 4 Rating @ 40 hrs. Minimum* Test Method – AATCC 16 A or E Dry Crocking – Class 4 Rating Minimum* Test Method – AATCC 8 Wet Crocking – Class 3 Rating Minimum* Test Method – AATCC 8
CLEANING CODE:
W