HOW TO MAKE YOUR OWN RINGS .
PLIERS
LIPSTICK
WIRE CUTTERS
WIRE
All you will need is pliers, wire, wire cutters, and You'll also need something like a battery or something round to wrap the wire around to form the shape.
CURVE IT !
First, Take your pliers and curve the end of the wire towards a point on the wire. Make sure that it touches as close as possible to the wire.
Then, do the same thing on the other side and make that first curve.
Next, Take that end of the wire, the end that doesn t already have the finished half of the sign, and flip it over, crossing it to the other side as you can see in the photo.
BEND IT OVER
THERE YOU GO !
INFINITE AWESOMEESS RIGHT THERE
After that, Cut off the excess wire and you have your infinity charm.
WRAP IT AROUND
The next step is to form the ring. Wrap your second piece of wire around your lipstick. 
 Then use a lipstick (something comparable to the width of your finger) and wrap the wire around it to form a ring-like shape. Don't go all the way around, leave an opening at the top.
SLIP THE SIGH ON THE BAND
The next thing you do is take the infinity pendant you made and take the piece of wire and thread the wire through the right loop and use your pliers to carefully bend it over under to form a closed loop.
CLAMP IT DOWN !
Next, try the ring to see how big or small you need it to be. You can now snip off the end excess wire, if it is too long. But, be sure to leave enough wire to bend over to form a final closed loop.
To do the final closed loop for your ring, it's a good idea to put the whole thing back onto the lipstick. So you have it keeps its round structure as you create your final
ARE YOU’RE DONE
Finally, it done, just clean it up and bend or reshape as needed to give the ring a consistent round shape.
closed loop.
Tada! An original infinity ring that only took 10 minutes!
THANKYOU FOR YOUR ATTENTION :✆