Nยบ 13
ENGLISH
Portable pneumatic tools
PNEUMATIC STONE CUTTER PSC-150 Ø150 It works with water and compressed air that facilitate the cutting of stone, agglomerates and other materials. MODEL Air pressure Air consumption Min Air consumption Max No load RPM Air inlet Water inlet Arbor Max. HP Cutting disc diameter
PSC-150 90 PSI 32 CFM/ 1HP 48 CFM / 2HP 8.500 RPM 3/8” NPSM 1/4” BSPP 7/8'' - 22 mm 2.0 HP Ø 6'' - 150 mm
Equipped with a 2 hp motor, with a speed governor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4” (3cm) stone slabs in one pass. Guide Rail System to support the application of making precise miter cuts for the perfect lamination. The PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter. The flexibility of the hoses helps reduce operator fatigue and improves the operation. MODEL
High-end general purpose turbo Blades for Stone Fabricators Katana Special Dekton Diamond Extra Perfect for Granite and Engineered Stone
PORTABLE PNEUMATIC TOOLS
Eclipse II
4
ECLIPSE II
KATANA
DIAMOND EXTRA
MITER CUTTING KIT PSC-150 Ø150 ACCESSORIES FOR CORTES AT 45º One System for Straight, Curve and Miter Cuts One System for Straight, Curve and Miter Cuts. Precise Miter Cuts for laminated waterfall edge and book matching. Miter Cut 3cm material with ease. One-Time easy setup on the guide rail allows for two different miter cut positions for lamination prep. Save Time and Increase Shop Productivity.
Kit Contains: • 2-PSC-150 Stone Cutters, • 2-6” Carriage Assemblies, • Guide Rail Set (4', 7', 12') • Surface Protection Tape
Precise miter cutting for laminated waterfall edges and book matching.
One System for Straight, Curve and Miter Cuts.
STEP 03
Miter Cut 1-1/4'' material with ease.
One-Time setup on the guide rail allows for two different miter cut positions for lamination.
STEP 02
STEP 04
TOOLS
STEP 01
5
PNEUMATIC POLISHER AIR-684 M14 PRECISION TOOL FOR BEVELING, RECTIFYING AND POLISHING High-Performance Pneumatic Polishing Tool. Polishing Tool with a Central Water-Feed System. No-Load 4,000 RPMs, Consumes 15 CFM and Requires 85 PSI Lightweight and Ergonomically Designed. It is now equipped with 15ft. flexible air and water supply hoses and an oil port for easy maintenance. These new hoses are made of Hybrid Flexible Material and are all-weather flexible down to -5ºC. Offers a splash guard and C-Shaped handle as optional accessories. This workhorse tool is designed for a long life and is a must-have for any fabrication shop.
PORTABLE PNEUMATIC TOOLS
MODEL Air pressure Air consumption Speed (No load) Weight Air inlet Water inlet Spindle Husillo
6
PSC-150 85 PSI 15 CMF 4.000 RPM 2.64 Ibs /1.2 Kg 1/4” BSPP 1/8”BSPP 1/8” M14
PNEUMATIC POLISHER AIR-684 M14 ACCESSORIES FOR CORTES AT 45º Create A Precise Edge Whether Mitered, Beveled or Straight 1. Creates A Precise Edge Whether Mitered, Beveled or Straight. 2. Perfect On All Materials Including Sintered Slabs and Thin Porcelain Panels. 3. Precision Grinding for Perfect Mitered Edge for Lamination. 4. Transforms Any Polisher or Variable Speed Grinder Into a Precision Straight and Beveled Edge Polishing Tool. 5. High-Quality Polishing Results.
KIT BAVELLING ADJUSTABLE BASE KIT OF 15 AT 90 DEGREES. grinding wheel to make mitered edges for the laminated waterfall edge on thin porcelain panels with ½” or less thickness. This method may be used to make a precise miter edge for the perfect laminated edge, instead of the technically demanding miter cut application. Start with precision edges and corners to make a high-quality job every time!
TOOLS
Designed a Carriage Assembly specifically for the Beveling Auxiliary Base (BAB-1590) to assist the precision grinding, beveling and polishing applications. Since the carriage assembly is supported by the guide rail system, it creates the perfect chamfer edge, and difficult edges such as Hollywood Bevel, as well as the straight edge easily by hand applications. We also recommend using the to a inglete
7
PORTABLE PNEUMATIC TOOLS
PNEUMATIC POLISHER AIR-684 M14 PRECISION TOOL FOR BEVELING, RECTIFYING AND POLISHING
8
PIC.
MODEL
01
GRINDING TURBOSHINE TOOL
02
GRIT
ARBOR
60
M14
GRINDING TURBOSHINE TOOL
120
M14
PIC.
MODEL
GRIT
ARBOR
03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 9 20
DUAL ADAPTER
100 200 500 1000 2000 3000 BLACK WHITE 100 200 500 1000 2000 3000 BLACK WHITE 60 120
M14
DIAMETER
7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM 7,6 CM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
10011566 PORTABLE AIR DRILL MACHINE The Portable Air Drilling Machine is a lightweight, versatile drill made of aluminium to reduce weight, and features an integrated vacuum base making it instantaneous to set up with no need for anchoring or clamping. The Air Drilling Machine quickly attaches to both smooth and rough flat surfaces once vacuum is applied. This drilling machine is suitable for use on vertical and horizontal surfaces whether the surface is cement, stone, glass or metal. The vacuum base provides stability. Features • The machine has stepless speed regulation and the max. free speed is 1,200 rpm. • Conveniently place water nozzle ensures that the drill bit is kept cool during drilling. • The Drilling Depth Control design can show or setup the depth that you are drilling. • Three speed control switch. • The Aardwolf Portable Drilling Machine has an integrated vacuum base which can be mounted on cement, stone, glass or metal. Advantage • It can replace the Portable Magnetic Drill that can only be used on fibrous materials. • It can be used on smooth or rough flat surfaces
TOOLS
• The vacuum base provides stability.
9
TO CESI
FOTO OJO INAL ORIG
EN
. NE BAJA