VITA MFT
®
Multi Functional Teeth Upper anteriors
Lower anteriors
Triangular
O40
Rectangular
T41 40,0
Upper and lower posteriors
R42 40,5
L33 42,1
PU29 – PL29 No.
32,6
mm
No. 10,0
9,4
7,5
9,3
7,5
O44
7,9
T43 43,9
43,3
L34 44,5
10,2
10,3
T46 49,2
5,1
R47 46,1
L37 46,6
11,8
36,8
11,0
10,2
9,0
8,5
mm
mm
O40
40,0
L33 32,6
PU29 28,8
PL29 29,6
O44
43,9
L34 34,0
PU29 28,8
PL29 29,6
O49
49,2
L40 39,5
PU33 33,0
PL33 33,6
T41
40,5
L33 32,6
PU29 28,8
PL29 29,6
T43
43,3
L34 34,0
PU31 30,6
PL31 31,1
T46
46,1
L37 36,8
PU31 30,6
PL31 31,1
T49
48,8
L40 39,5
PU33 33,0
PL33 33,6
42,1
L34 34,0
PU29 28,8
PL29 29,6
8,6
8,2
9,8
8,5
5,5
R 42 T49
All measures in mm
L37LN 36,8
48,8
9,8
11,8
Rectangular
9,0
Set width
Width of central tooth
Crown height
44,5
L37 36,8
PU31 30,6
PL31 31,1
R 47
46,6
L37 36,8
PU33 33,0
PL33 33,6
S47
46,8
L40 39,5
PU33 33,0
PL33 33,6
S50
49,7
L40 39,5
PU33 33,0
PL33 33,6
L40 46,8
39,5
29,6
9,5
PU31 – PL31 30,6
31,1
9,6
10,0
PU33 – PL31 33,0
33,6
10,3
10,6
10,5
10,8
8,9
mm
R 45
5,5
S47
9,0
No.
34,0
10,3
8,2
O49
4,8
R45
8,1
9,0
28,8
6,1
The shade range of VITA MFT covers • 13 VITA SYSTEM 3D-MASTER shades VITA SYSTEM 3D-MASTER
S50 49,7
12,0
The mould L37LN (Long Neck) was specifically developed for simulating particular periodontal characteristics which, for example, occur in partial prosthetics.
1M1 2L1.5 2M1 2M2 3L1.5 3L2.5 3M2 3R2.5 4L1.5 4M2 5M1 0M1 0M3 ~ B1 ~ B2
~A2
~C2 ~B3 ~D4
~A3.5
~A4 ~C4
• 4 VITA classical A–D shades 9,2
VITA classical A–D A1
A3
C3
D3
Please note: Our products were developed specifically for dental use and must be processed according to the instructions for use. The information/illustrations contained herein do not constitute an assurance of properties and are not binding. VITA Zahnfabrik is certified, according to the Medical Device Directive. VITA MFT Teeth were certified bear the CE mark and fulfil the requirements of ISO 22112 : 2005.
1570 E – 0314 (X.) S – Version (01)
Ovoid
Combination Chart