Duct Board Tools

Female shiplap tools

T-130 Mfg. ID 2101 Female Shiplap Tool for 2” Ductboard T-138 Mfg. ID 1086 Female Shiplap Tool for 1 1/2” Ductboard T-145 Mfg. ID 1101 Female Shiplap Tool for 1” Ductboard

Female Shiplap Tool cuts female slip joint, also cuts seating edge of duct board at longitudinal closure corner. Tool color: Black

Right modified shiplap Tools

T-132 Mfg. ID 2104 Right Modified Shiplap Tool for 2” Ductboard T-139 Mfg. ID 1412 Right Modified Shiplap Tool for 1 1/2” Ductboard T-146 Mfg. ID 1402 Right Modified Shiplap Tool for 1” Ductboard

Modified Shiplap Tool removes insulation for shiplap corner folds. Tool color: Orange

Left modified shiplap Tools

T-133 Mfg. ID 2105 Left Modified Shiplap Tool for 2” Ductboard T-140 Mfg. ID 1413 Left Modified Shiplap Tool for 1 1/2” Ductboard T-147 Mfg. ID 1403 Left Modified Shiplap Tool for 1” Ductboard

Modified Shiplap Tool removes insulation for shiplap corner folds. Tool color: Orange

Male Shiplap tools

T-134 Mfg. ID 2103 Male Shiplap Tool for 2” Ductboard T-141 Mfg. ID 1106 Male Shiplap Tool for 1 1/2” Ductboard T-148 Mfg. ID 1103 Male Shiplap Tool for 1” Ductboard

Male Shiplap Tool cuts male slip joints which mates with female slip joints to connect two duct sections. Tool color: Yellow

Right/Left modified shiplap Tools

T-135 Mfg. ID 2106 Right/Left Modified Shiplap Tool for 2” Ductboard T-142 Mfg. ID 1415 Right/Left Modified Shiplap Tool for 1 1/2” Ductboard T-149 Mfg. ID 1400 Right/Left Modified Shiplap Tool for 1” Ductboard

Modified Shiplap Tool removes insulation for shiplap corner folds. Reversing the tool allows for both left and right hand shiplaps to be cut. Tool color: Orange

End cut-off tool (4 in 1 cut)

T-136 Mfg. ID 2102 End Cut-Off Tool for 2” Ductboard T-143 Mfg. ID 1087 End Cut-Off Tool for 1 1/2” Ductboard T-153 Mfg. ID 1102 End Cut-Off Tool for 1” Ductboard

End Cut-Off Tool cuts shiplap on end of board for longitudinal corner closure, plus staple flap. Tool color: Blue

Miter Cut or 90° Vee Groove Tool

T-137 Mfg. ID 2100 Miter Cut or 90° Vee Groove Tool for 2” Ductboard T-144 Mfg. ID 1084 Miter Cut or 90° Vee Groove Tool for 1 1/2” Ductboard T-154 Mfg. ID 1100 Miter Cut or 90° Vee Groove Tool for 1” Ductboard

Vee Groove Tool cuts 90° Vee Grooves for corner folds when modified shiplap grooving methods are not used. Tool color: Red