Tapping Systems

QUICK CHANGE TAPPING SYSTEM

Tapping Chuck - TC Tapping Collet - TASC Tap

MORSE TAPER TAPPING CHUCKS (TC)

Part No. Type Description To Suit SPTH-MT2-31 MT2-31 MT2 x 31mm HMSPECIAL60 SPTH-MT3-31 MT3-31 MT3 x 31mm HMSPECIAL80, HMSPECIAL110 SPTH-MT3-48 MT3-48 MT3 x 48mm HMSPECIAL110 SPTH-MT4-60 MT4-60 MT4 x 60mm HMSPECIAL140

TAPPING COLLETS WITH SAFETY CLUTCH (TASC)

Part No. Type Connection Diameter (A) Tap Size Tap Shank Size (B) Tap Shank Size (C)

SPTH-TASC19-M3 TASC-1 19mm M3 3.5mm 2.7mm SPTH-TASC19-M4 TASC-1 19mm M4 4.5mm 3.4mm SPTH-TASC19-M5-6 TASC-1 19mm M5, M6 6mm 4.9mm

SPTH-TASC31-M8 TASC-2 31mm M8 8mm 6.2mm SPTH-TASC31-M10 TASC-2 31mm M10 10mm 8mm SPTH-TASC31-M12 TASC-2 31mm M12 9mm 7mm SPTH-TASC31-M14 TASC-2 31mm M14 11mm 9mm SPTH-TASC31-M16 TASC-2 31mm M16 12mm 9mm SPTH-TASC31-M18 TASC-2 31mm M18 14mm 11mm SPTH-TASC31-M20 TASC-2 31mm M20 16mm 12mm

TAPPING REDUCTION ADAPTORS

Part No. Type Description SPTH-RA-2-1 RA 2/1 2/1 (31mm / 19mm) SPTH-RA-3-1 RA 3/1 3/1 (48mm / 19mm) SPTH-RA-3-2 RA 3/2 3/2 (48mm / 31mm) SPTH-RA-4-2 RA 4/2 4/2 (60mm / 31mm) SPTH-RA-4-3 RA 4/3 4/3 (60mm / 48mm)

TAPPING SYSTEM COMPATIBILITY OVERVIEW

SPTH-TASC48-M16 TASC-3 48mm M16 12mm 9mm SPTH-TASC48-M18 TASC-3 48mm M18 14mm 11mm SPTH-TASC48-M20 TASC-3 48mm M20 16mm 12mm SPTH-TASC48-M22-24 TASC-3 48mm M22, M24 18mm 14.5mm SPTH-TASC48-M27 TASC-3 48mm M27 20mm 16mm SPTH-TASC48-M30 TASC-3 48mm M30 22mm 18mm

SPTH-TASC60-M33 TASC-4 60mm M33 25mm 20mm SPTH-TASC60-M36 TASC-4 60mm M36 28mm 22mm SPTH-TASC60-M42 TASC-4 60mm M42 32mm 24mm

Tapping Chuck Model Tapping Collet Type TASC-1 (19mm)

Tapping Collet Type TASC-2 (31mm) SPTH-MT2-31 Yes When Used With SPTH-RA-2-1 Yes SPTH-MT3-31 Yes When Used With SPTH-RA-2-1 Yes

Tapping Collet Type TASC-3 (48mm) N/A N/A SPTH-MT3-48 Yes When Used With SPTH-RA-3-1 Yes When Used With SPTH-RA-3-2 Yes Tapping Collet Type TASC-4 (60mm) N/A N/A N/A

SPTH-MT4-60 N/A Yes When Used With SPTH-RA-4-2 Yes When Used With SPTH-RA-4-3 Yes

AXIAL FLOAT TAPPING HEADS

• Protection against tap breakage ensured by an ultra-sensitive and smooth multi-position operating ball-clutch • Forward and reverse ball drive design transmits rotational power to the tap and disengages smoothly and silently • Axial float ensures smooth tapping and better thread profile • Cushioned drive incorporating compression and extension, eliminates the possibility of cross threading during the tapping process, and ensures clean and accurate threads • A planetary gear reversing mechanism transmits smooth positive reverse to the tap retraction and it retracts 75% faster than it enters • Accurate depth control by means of it's precise neutral mechanism • Above tap sizes are based on DIN standards, check the shank and square size of the collet suits the taps you will use

Part No. Description SPTH102 3 - 12mm Tapping Head With #2 MT SPTH103 8 - 20mm Tapping Head With #3 MT