Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599 INNOVATING
safety wellness SOLUTIONS
SAFEWORK SITES
Ph: 07 - 3326 1500
Email: Sales@cltoolcentre.com
&
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW ---NO LOOSE ENDS---
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Email: Sales@cltoolcentre.com
SMALL FALLING OBJECTS
DANGERS OF SMALL FALLING OBJECTS This brochure provides a step-by-step guide to preventing Small Falling Objects with the latest in small falling objects prevention technologies and best industry practice. Small falling objects pose serious hazards in the workplace. On most workplaces small objects are varied from hand held tools and equipment to small debris. Small objects are high in number and their size makes them hard to control. Even a 1kg spanner dropped from a height of 4 metres will hit the ground travelling over 30km/h.
TOOLS
FALLING OBJECTS
Controlling the hazards small objects create pose a number of challenges. Without the correct controls, small falling objects can: • Cause injury and death • Damage property • Create tool damage • Damage equipment below • Lost time recovering fallen tools
SMALL FALLING OBJECTS
PPE
LARGE FALLING OBJECTS
PORTABLE EQUIPMENT
WORKER FALLS
MATERIALS & PARTS
DEBRIS
Ph: 07 - 3326 1500
Studies show that 30% of falling object incidents arise from mechanical, technical and design issues, whilst almost 50% occur from human error.
AUSTRALIA
According to the Notified Fatalities Statistics Report 2009-2010, 14% of fatalities in Australian workplaces from 2004-2010 were attributed to objects falling from heights.
NEW ZEALAND
In a report commissioned by the Ministry of Innovation & Employment, every year in New Zealand around 100 people die from fatal workplace injuries of which people struck by falling objects is a leading cause.
SINGAPORE
Workplace Safety & Health (2008) statistics show being struck by falling objects is the second most common cause of workplace fatalities in Singapore and a leading cause of workplace injuries.
EMPLOYER OBLIGATIONS
1
AUSTRALIA
NEW ZEALAND
SINGAPORE
Sections 34-38 of the Workplace Health & Safety (WHS) Act 2011, requires employers to minimise risks where reasonably practical to employees. To help Employers comply the WHS legislation, Safe Work Australia in 2012 published the “Falling Objects Fact Sheet” that requires tools and materials to be tethered when working at heights.
According to the publication, Guidelines for the Prevention of Falls to meet the Requirement of the Health Safety in Employment Act 1992, all tools and equipment are to be attached by a cord unless another effective method is used to prevent a falling hazard. AS/NZS 4488 also requires all tools and equipment to be tethered when working at heights.
In the Code of Practice for Working Safely at Height, section 10.2.7.4 stipulates that risks of falling objects must be mitigated, small tools must be secured to the person with the use of a lanyard. The Act also requires employers not to merely follow the law but take reasonable practical steps to proactively reduce risk to Employees.
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
IDENTIFYING HAZARDS
TOP CAUSES OF FALLING OBJECTS
Prior to commencing any task that requires working from heights the following steps can help identify potential small falling object hazards. 1. 2.
3. 4. 5. 6. 7. 8.
9.
1. Inadequate risk assessment
Look for any environmental factors such as wind, rain, drafts, heat etc. Identify sources of energy that can cause falling objects for example gravity, mechanical movement, electrical, pressurised equipment and vibration. Prior to starting work visually inspect the area for preexisting hazards such as debris and loose items. Make sure all safety securing features are in use. Look for any collision or snagging hazard with fixtures and in particular moving or rotating machinery. Pay special attention to corroded bolts and brackets. Check what controls are in place for example: scaffolding, toe boards, barriers, netting, etc. Inspect all equipment and tools for damage, attachment points, lanyards, lift buckets, ropes and tool belts. Remove any loose items or equipment.
TO DOWNLOAD EDUCATIONAL TOOLS VISIT WWW.PRYME.NET.AU/SMALL-FALLING-OBJECTS
Email: Sales@cltoolcentre.com
WHAT YOU NEED TO KNOW
2. Human error 3. Inadequate procedures 4. Failed fittings and hazards 5. Poor housekeeping 6. Snaggings & collisions 7. Inadequate repairs & inspections 8. Neglected & home made tools 9. Inadequately stored or secured tools & equipment Source: Dropped Objects Awareness & Prevention: Reliable Securing. Revision 03. www.dropsonline.org
ELIMINATION
ENGINEERING
When working at heights, examples to eliminate small falling object hazards include: • Leave any tools and equipment not required for the job at ground level. • Remove debris from the work area prior to commencing work. • If there is any energy sources in the work area, such as mechanical rotation, if possible turn them off prior to starting the job. • If environmental conditions pose a source of danger, such as strong winds, consider rescheduling work.
There are a number of engineering controls to minimise risks of falling objects, examples include: • Temporary work platforms, perimeter guard rails, safety mesh, industrial rope access systems, catch platforms, industrial safety nets, toe boards and rails. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011). • Tool lanyards and topped containers can also be utilised as engineering controls
SUBSTITUTION Hazards can be substituted for ones that pose a lower risk. Examples include: • Consider prefabricating components at ground level and hoist into place. • Investigate the possibility of substituting ladders for elevated work platforms.
PPE PPE is only to be used as a last resort to control risks, examples include: • Hard hats and steel capped boots. • Individual fall arrest systems, such as harnesses, lifelines, etc. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).
Ph: 07 - 3326 1500
RISK CONTROLS
ADMINISTRATIVE ADMINISTRATION When working at heights, administrative controls should be implemented, examples include: • “No Go” areas that prohibit unauthorised people from entering areas. Permit systems can also be used to restrict access. • Sequence work to reduce risk, for example so trades are not working above and below each other at the same time. • Staff training, risk assessment and safe work procedures. For more information Visit www.pryme.net.au/small-falling-objects to download your Free Educational Tools
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
2
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Email: Sales@cltoolcentre.com
SMALL FALLING OBJECTS
The top 3 causes of falling objects are inadequate risk assessments, procedures and human error. Inspecting the work environment by conducting a detailed risk assessment is crucial to identify these hazards and minimize the risk involved. In addition to large objects, untethered, and unsecured tools and equipment can be dangerous and can cause injury, damages and lost time.
Ph: 07 - 3326 1500
The following pages can help identify the correct tethering and storage solutions for your task to prevent small falling objects. After cataloguing and identifying sizes, weights and attachment points of your tools required for the job, use the following steps to ensure you leave no loose ends.
3
STEP
SELECT TAILS & TRAPS
Use Tails and Traps to create attachment points for tools and personal equipment without attachment points.
STEP
SELECT LANYARDS
Level of clearance, weight of tools and equipment, connection points, risk evaluation and different hazards such as electrical or tangle hazards all effect lanyard selection.
HELPING FIX THE ISSUE
STEP
SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS
Use the Accessory Anchor to create anchor points where they don’t exist. Use Hoist Buckets to secure and lift tools, materials, parts & debris. Secure smaller objects with Aerial tool belts.
HELPING FIX THE ISSUE
STEP
SELECT TIE HOOKS & GRABBERS
Use Tie Hooks to safely secure rope and cables. Use Grabbers to secure rags, gloves and similar equipment at heights.
HELPING FIX THE ISSUE
HELPING FIX THE ISSUE No attachment point means no tether for the object, creating a falling object hazard.
Safely tether all tools, equipment, PPE, parts, materials and debris to minimise hazards found at heights
Create safe options to tether small objects at heights, on the worker, and for lifting operations.
Help tidy work areas that cause fall hazards. Secure cable and rope to stop trip and tangle hazards.
GO TO P. 5
GO TO P. 9
GO TO P. 14
GO TO P. 18
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Email: Sales@cltoolcentre.com
WHAT YOU NEED TO KNOW
Ph: 07 - 3326 1500
Falling objects are a leading cause of injuries and death in the workplace.
When working at heights, legislation requires tools to be tethered.
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
4
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Established 1969
SELECT TAILS & TRAPS
Email: Sales@cltoolcentre.com
STEP
Catalogue all tools and equipment used at heights. For tools and equipment that do not have attachment points, select a tail and trap or a shackle.
1 SELECT TAIL WEB TOOL TAIL
ELASTIC LOOP TAIL
0.9Kg Max* MODEL NO.
PART NO.
4.5Kg Max* MODEL NO.
6.8Kg Max*
PART NO.
ELASTIC LOOP TAIL
PART NO.
MODEL NO.
19703 19704 3700
19767
3703
3703
3703EXT 19705
3703EXT
3713
WEB TOOL TAIL
19769
19765
19706
*Note - Max denotes the maximum weight of the item to tether
2 SELECT TRAP
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
Tool Trap
Ph: 07 - 3326 1500
WHAT TO DO...
5
Solution
Tool Trap Model Number
Tool Tail Model (Type)
Tool Diameter Min/Max (mm)
3723
3703 (Elastic)
16-38
3724
3703 (Elastic)
38-45
3726
3703EXT (Elastic)
45-63
SHRINK TRAP
Tool Diameter Min/Max With Capacity 16-32mm
0.9kgs
32-38mm
2.3kgs
32-38mm
2.3kgs
38-45mm
4.5kgs
45mm-57mm
4.5kgs
57mm-63mm
6.8kgs
3700 (Web)
TAPE TRAP
3750
0.9kgs All Diameters
All Diameters
3703 (Elastic)
OR
6.8kgs
Select a tail and trap or a shackle.
3 SELECT SHACKLE Shackle Solution
A
B
C
3790S
19mm
10mm
5mm A
3790M
26mm
12mm
5mm
3790L
32mm
16mm
8mm
3790XL
38mm
20mm
10mm
C B
Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.
KEY FEATURES • Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Adjustable barrel lock for tool attachment • Fully enclosed plated O-ring for secure attachment • Maximum safe working capacity 6.8 kg • Doubles as an anchor loop for belt, harness or separate
structure party tested using a 2:1 safety factor
• Third
DESCRIPTION Part No.
Description
Units
19767
3703 Standard 28cm Lime
Each
19769
3703EXT Extended 46cm Lime
Each
ERGODYNE® SQUIDS® 3713 ELASTIC LOOP TOOL TAILS SWIVEL
Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.
KEY FEATURES • Plated swivelling connection • Doubles as an anchor loop for
belt, harness or separate structure • Maximum safe working capacity: 4.6 kg • Third party tested using a 2:1 safety factor • Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Adjustable barrel lock for tool attachment
DESCRIPTION Part No. 19765
Description
Units
Swivel Elastic Loop Tool Tail
Each
Email: Sales@cltoolcentre.com
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
ERGODYNE® SQUIDS® 3703, 3703EXT ELASTIC LOOP TOOL TAILS
Ph: 07 - 3326 1500
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
6
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Email: Sales@cltoolcentre.com
ERGODYNE® SQUIDS® 3700 WEB TOOL TAILS Web Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 0.90kg using Squids® Tool Traps™.
KEY FEATURES • Ultra • Fully
strength nylon webbing enclosed plated D-ring for secure attachment • High tensile strength nylon thread • Web catch with double stitch for more durable stopping point • Available in five colour coded lengths • Third party tested using a 2:1 safety factor
DESCRIPTION Part No.
Description
Units
19703
Web Tool Tails (9cm) Black
Each
19704
Web Tool Tails (11.5cm) Orange
Each
19705
Web Tool Tail (14cm) Black
Each
19706
Web Tool Tails (16.5cm) Orange
Each
19708
Web Tool Tails (21.5cm) Black
Each
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
7
pryme.net.au
Ph: 07 - 3326 1500
ERGODYNE® SQUIDS® TAPE TRAP
USING SQUIDS® TAPE TRAPS
MEASURE IT
WRAP IT
HEAT IT
KEY FEATURES • Non-silicone
based makeup works well in a variety of
applications • No adhesives so it can be replaced without a • Sealed and set with heat application to finish
mess
application and secure and puncture resistant compared to other tool tapes • Material content and finish provides added grip to the handle of a tool • Maximum safe working capacity: 6.8 kg depending on length, tool, tail and lanyard used • Cut
LAY IT DOWN
TETHER IT
Captures Squids® Tool Tails™ securing a safe connection to tools like no other tool attachment tape on the market. Quickly wraps on a variety of hand tools, power tools and other equipment providing security and added grip
DESCRIPTION Part No.
Description
Units
19760
3705S - Tape Trap 3.65m Roll Each
19761
3705M - Tape Trap 9.14m Roll Each
Cold Shrink Traps capture Squids® Elastic Tool Tails™ creating a retrofit connection point for tethering.
PULL CORD TO ATTACH SHRINK TRAP TO TOOL & TAIL
KEY FEATURES • 19723
DESCRIPTION Description
Units
19723
Shrink Tool Trap 2.3kg
Each
19724
Shrink Tool Trap 4.5kg
Each
19726
Shrink Tool Trap 6.8kg
Each
TOOL READY FOR TETHER WITH SHRINK TRAP & TAIL
ERGODYNE® SQUIDS® TOOL SHACKLES
Ph: 07 - 3326 1500
Part No.
Fits tool diameter range 16mm - 32mm • 19724 Fits tool diameter range 32mm - 45mm • 19725 Fits tool diameter 45mm - 63mm • Cold Shrink technology from 3M requires no heat source • No additional tools needed to ensure a secure connection on tool • EPDM rubber material resists acids, alkalies and extreme temps • Patent Pending application is the quickest and easiest way to create an attachment point • Maximum safe working capacity: 6.8kg depending on tool, tail and lanyard used • Third party tested using a 2:1 safety factor
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
ERGODYNE® SQUIDS® 3723, 3724, 3726 SHRINK TOOL TRAP
Stainless steel U shaped shackles connect to waisted tools (tapered mid sections) or tools with captive holes, creating clean, secure attachment points for tethering.
KEY FEATURES • Stainless
steel (#304) material is corrosion resistant • One step retrofit attachment for temporary or permanent connection point • Connects around midsection of a waisted tool • Connects through eye of a captive tool to create a more accessible tethering point • Secure by adding a drop of adhesive and tightening with wrench or pliers • Maximum safe working capacity: 6.8 kg depending on model, tool and lanyard used
DESCRIPTION Part No. 19792
Description
Units
Small
Each
19793
Medium
Each
19794
Large
Each
19795
Extra Large
Each
Email: Sales@cltoolcentre.com
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
8
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Established 1969
9
WHAT TO DO...
SELECT LANYARDS LANYARD FEATURE
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
Ph: 07 - 3326 1500
Email: Sales@cltoolcentre.com
STEP
Identify hazards in your at heights environment. Select lanyards to tether all loose tools, equipment & hoist buckets to minimise hazards identified in the risk assessment.
LANYARD MODEL NUMBER 3000 3001
3115
Weight Max (kg)
0.46
0.9
0.9
Minimise Tangle & Twist Hazard (Ideal for small tools & equipment)
Detachable
X
X
Retractable
X
X
Swivel
X
X
X
Minimise Marring Hazard
Single Loop
X
X
Minimise Sparking & Marring
Dual Loop
Extra Secure Connection Corrosive Environment
Locking Carabiner
Most Secure Connection Corrosive Environment
Dual Leg
Screw Gate
3104 3102 3100 3108 2.0
2.3
4.6
4.6
3111
3311
3119
6.8
6.8
9.0
X
X X
X
X
X
X X X
X
X
X
X
X
Triple Locking
ERGODYNE® SQUIDS® 3115 WRIST TOOL LANYARD Wrist Tool Lanyard: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.
KEY FEATURES • Polyester webbing cuff secures to wrist • Ribbed pull cord • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 0.9 kg • Tether length 19cm • Wrist Measurement: S/M 13cm – 18cm • Wrist Measurement: L/XL 18cm – 22cm
DESCRIPTION Part No. Description
Units
19042
Black S/M
Each
19052
Black L/XL
Each
X
X X
3001 LOOP
KEY FEATURES
Retractable tool lanyard with stainless steel carabiner attachment. Locks into place at desired length preventing tangles and work under tension while securing tools.
Self-setting pawls set desired lanyard length up to 122cm ABS thermoplastic housing for ultimate durability Nickel-plated swivelling top ring for 360 degree rotation Stainless steel carabiners (#304) for corrosion resistance Technora cord for ultimate strength and durability Modular quick connecting buckle for exchanging multiple tools • Adjustable barrel lock for tool attachment • 3000 Carabiner - Maximum safe working capacity: 0.46 kg • 3001 Loop - Maximum safe working capacity: 0.9kg • Patented design • • • • • •
DESCRIPTION Part No. 19300 19301
Description
Units
Carabiner
Each
Loop
Each
ERGODYNE® SQUIDS® 3025, 3026 RETRACTABLE ACCESSORIES Retractable tool lanyard attachments for quick exchange of multiple tools.
3025 CARABINER
KEY FEATURES Compatible with Retractable lanyards 3000 and 3001 • Modular quick connecting buckle for exchanging multiple tools •
DESCRIPTION Part No. Description
Units
19325
Compatible with 3000 Retractable Lanyards
Each
19326
Compatible with 3001 Retractable Lanyards
Each
Email: Sales@cltoolcentre.com
3000 CARABINER
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
ERGODYNE® SQUIDS® 3000 RETRACTABLE DUAL CARABINER ERGODYNE® SQUIDS® 3001 SINGLE CARABINER W/LOOP END
Ph: 07 - 3326 1500
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
3026 LOOP
10
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Established 1969
Tool Lanyard-Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.
KEY FEATURES • Stretch
cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Aluminium carabiner • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 4.6 kg • Standard 89cm-107cm • Extended 107cm-137cm
DESCRIPTION Part No. 19003 19013
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
Ph: 07 - 3326 1500
Email: Sales@cltoolcentre.com
ERGODYNE® SQUIDS® 3100, 3100EXT SINGLE CARABINER
11
Description
Units
Lime
Each
Lime - Extended Each
ERGODYNE® SQUIDS® 3119, 3119EXT TRIPLE-LOCKING DUAL CARABINER Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Swivelling triple locking carabiners provide secure connection and prevent twisting and tangling while performing job.
KEY FEATURES • Stretch
cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Heavy-duty (8KN) triple-locking carabiner • Carabiner features 360 degree swivel captive-eye • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 9.0 kg • Standard 89cm-107cm • Extended 107cm-137cm
DESCRIPTION Part No.
Description
Units
19029
Lime
Each
19039
Lime - Extended
Each
Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.
KEY FEATURES • Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Heavy-duty (500kgf) self-locking carabiner • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 4.6 kg • Standard: 71cm - 89cm
DESCRIPTION Part No. 19008
Description
Units
Lime
Each
ERGODYNE® SQUIDS® 3104 DETACHABLE DUAL LOOP Non-conductive and non-marring. Dual loop, interchangeable design eliminates all metal from lanyard. Great for working on or around sensitive surfaces or electrical applications.
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
ERGODYNE® SQUIDS® 3108 LOCKING SINGLE CARABINER
Email: Sales@cltoolcentre.com
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
KEY FEATURES cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Truly non-conductive with dual loop design • Perfect for scratch and damage sensitive surface work as non-marring option • Adjustable barrel lock for tool attachment • Modular quick connecting buckle for exchanging multiple tools • Maximum safe working capacity: 2.26 kg • Standard 89cm-107cm
Ph: 07 - 3326 1500
• Stretch
DESCRIPTION Part No. 19104
Description
Units
Lime
Each
ERGODYNE® SQUIDS® 3102, 3102EXT DETACHABLE SINGLE CARABINER Tool Lanyard - Detachable/Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Compatible with #3103 Lanyard Loop.
KEY FEATURES Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Aluminium carabiner • Adjustable barrel lock for tool attachment • Quick connect buckle • Compatible with 3103: Detachable Lanyard Loops • Maximum safe working capacity: 2.26 kg • Standard 89cm-107cm • Extended 107cm-137cm •
DESCRIPTION Part No.
Description
Units
19063
Lime
Each
19073
Lime-Extended
Each
12
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Established 1969
Twin Leg Triple Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments. Dual leg for multiple connections.
KEY FEATURES • Stretch
cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Twin leg for connecting multiple tools or having 100% tie-off of single tool • Stainless steel carabiners (#304) for corrosion resistance • Maximum safe working capacity: 6.8 kg • Captive eye carabiner with screwgate for locking connection • Standard 89cm-107cm
DESCRIPTION Part No. Description 19083
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
Ph: 07 - 3326 1500
Email: Sales@cltoolcentre.com
ERGODYNE® SQUIDS® 3311 TWIN LEG STAINLESS TRIPLE CARABINER
13
Lime
Units Each
ERGODYNE® SQUIDS® 3111, 3111EXT STAINLESS DUAL CARABINER
Stainless Steel Screw Gate Tool Lanyard - Dual Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments.
KEY FEATURES • Stretch
cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Stainless steel carabiners for corrosion resistance • Screwgate on carabiner for locking connection • Maximum safe working capacity: 6.8 kg • Standard 89cm-107cm • Extended 107cm-137cm
DESCRIPTION Part No. Description
Units
19027
Lime
19037
Lime - Extended Each
Each
Clamp Hard Hat Lanyard: Easily and comfortably secures a hard hat to a worker to prevent the item from falling.
KEY FEATURES • Comfortably
attaches to hard hats and other headwear • Easy release clamp attaches securely to just about anything • Comfortable high stretch elastic material • Hi-Vis Lime
DESCRIPTION Part No. Description 19155
Units
Lime
Each
STEP SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
ERGODYNE® SQUIDS® 3155 CLAMP HARD HAT LANYARD
WHAT TO DO... 1. Select hoist buckets by identifying heavy equipment, parts, debris, materials required to be secured and/or hoisted. 2. Select tool belt & bag for smaller items carried by the worker. 3. Select accessory anchors to create attachment points .
Ph: 07 - 3326 1500
Established 1969
1 SELECT HOIST BUCKETS Model
Diameter (cm)
Height (cm)
Litres
Interior Pockets
Max Working
5740
32
43
34.2
1
68kg
5742
25
71
36.0
2
56kgs
5746
32
33
30.2
15
34kgs
2 SELECT TOOL BELT & BAG Model
5516
5518
Pockets
16
19
D-rings
3
4
Email: Sales@cltoolcentre.com
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Select the 5728 bolt bag to secure small parts to the person working at heights
3 SELECT ACCESSORY ANCHORS Model
Length (cm)
Max Working KG
3175
60
181
14
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
Established 1969
Email: Sales@cltoolcentre.com
ERGODYNE® ARSENAL® 5746 TAPERED PLASTIC BOTTOM BUCKET-SWIVEL
Tall Safety Bolt Bag with Loop Design: Wide body and one-handed cinch-up top for keeping gear safe and secure
Tapered Plastic Bottom Bucket: Wide top for easy access to bucket contents. Rope Handle
KEY FEATURES
KEY FEATURES
• Canvas • Moulded plastic base • Moulded plastic top ring • PP rope handle • 15 interior pockets • Heavy-gauge nylon
• Canvas • Patented
one-handed closure for safety and security • Nickel-plated rivets • 6- and 12-ply nylon stitching • 2 Exterior tool loops • Patented nickel-plated storm drain • Maximum safe working capacity: 12 Kg • 25cm x 13cm x 33cm
stitching • Nickel-plated swivel clip • Maximum safe working
capacity: 34kg mouth for easy loading • Diameter 32cm, height 33cm • Wide
DESCRIPTION
DESCRIPTION Part No.
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
14446
Ph: 07 - 3326 1500
ERGODYNE® ARSENAL® 5728 TALL SAFETY BOLT BAG
15
Description White
Units
Part No.
Each
14428
Description
Units
White
Each
ERGODYNE® ARSENAL® 5740T LEATHER BOTTOM BUCKET-SWIVEL WITH TOP
ERGODYNE® ARSENAL® 5742T TALL LEATHER BOTTOM BUCKET-SWIVEL WITH TOP
Leather Bottom Bucket w/ Snap: High wall, heavy duty bucket for strength and durability. Included detachable safety top.
Tall Leather Bottom Bucket: High wall, heavy duty bucket. Tall design holds longer equipment. Rope handle with swivel snap. Safety top included.
KEY FEATURES • Canvas • Leather reinforced base • Moulded plastic top ring • PP rope handle • Interior pocket • Heavy-gauge nylon
KEY FEATURES • Canvas • Leather reinforced base • Moulded plastic top ring • PP rope handle • 2 interior pockets for
stitching
organization
• Nickel-plated swivel clip • Maximum safe working
• Heavy-gauge nylon stitching • Nickel-plated swivel clip • Maximum safe working
capacity: 68 kg 32cm, height 43cm • Patented safety top included • Diameter
DESCRIPTION Part No. 14540
capacity: 56 kg • Diameter 25cm, height 71cm • Patented safety top included
DESCRIPTION
Description
Units
Part No.
White
Each
14542
Description
Units
White
Each
• 1680D Ballistic Nylon • 16 pockets for tools and fasteners • Top cover flap with buckle closure • Three nickel-plated D-rings for tool
KEY FEATURES lanyard
attachment • Patented Storm Drains™ • Abrasion-resistant PVC-reinforced pouch • Maximum safe working capacity: 15 kg
DESCRIPTION Part No. 13640
bases
• 1680D Ballistic Nylon • Top cover flap with hook and loop closure • Four Nickel-plated D-rings for tool lanyard attachment • Patented Storm Drains™ • Abrasion-resistant PVC-reinforced pouch bases • Maximum safe working capacity: 15 kg
DESCRIPTION
Description
Units
Part No.
Grey
Each
13642
Description
Units
Grey
Each
ERGODYNE® SQUIDS® 3175 ACCESSORY ANCHOR
Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.
KEY FEATURES • Heavy-duty 45mm Tetoron webbing strap • Nickel-plated iron D-Ring • Black 840D Nylon sleeve material • Heavy-gauge, contrasting color stitching • Maximum safe working capacity: 181 kg • Not for climbing or fall arrest
DESCRIPTION Part No. 19175
Description
Units
Lime
Each
Email: Sales@cltoolcentre.com
Aerial Tool Pouch/Loop Design: Easily attaches to any belt while keeping tools and fasteners secure.
KEY FEATURES
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
ERGODYNE® ARSENAL® 5518 19-POCKET AERIAL TOOL POUCH - LOOP DESIGN
ERGODYNE® ARSENAL® 5516 16-POCKET AERIAL TOOL POUCH
Ph: 07 - 3326 1500
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
16
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
Ph: 07 - 3326 1500
Email: Sales@cltoolcentre.com
Established 1969
17
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
& GRABBERS
ERGODYNE® SQUIDS® 3400 GRABBER Grabber: Keep gloves and other items handy. Clips to almost anything. Patented.
KEY FEATURES • • • • • •
Clips to clothing, belts, tool belts, and D-rings Detachable, usable with ‘beeners, D-rings, etc. Breakaway feature Dielectric / non-conductive material Durable, ultra-resilient acetal copolymer Patented design
DESCRIPTION Part No. Description
Units
19112
Black
Each
19117
Blue
Each
19118 Hi-Vis Orange
Each
19119
Each
Hi-Vis Lime
ERGODYNE® SQUIDS® 3510, 3530, 3540 TIE HOOK Tie Hook: Super duty, reusable tie hook for organizing and cinching hoses, cords, pipe and almost anything else.
KEY FEATURES Reusable sliding belt lock mechanism • High tensile strength, weather resistant Nylon 66 • Hi vis orange color • Excellent resistance to oil, salt, solvents, and alkali • Temp range: -40°C - 80°C • Patented design •
DESCRIPTION Part No. Description
3510 Recommended Load Limit
3530
3540
Units
33102
Small Hook 30cm
10kg
Each
33103
Small Hook 40cm
10kg
Each
33104 Small Hook 50cm
10kg
Each
33302
Large Hook 30cm
10kg
Each
33303
Large Hook 40cm
10kg
Each
33304
Large Hook 50cm
10kg
Each
33402
Large Locking Hook 30cm
20kg
Each
33403
Large Locking Hook 40cm
20kg
Each
33404
Large Locking Hook 50cm
20kg
Each
Email: Sales@cltoolcentre.com
1. dentify trip and tangle hazards. Use tie hooks to secure rope and cable. 2. Use grabbers to secure any loose items such as gloves and rags to the worker.
SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--
WHAT TO DO...
STEP SELECT TIE HOOKS
Ph: 07 - 3326 1500
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
18
Email: Sales@cltoolcentre.com
Established 1969
6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599
INNOVATING SAFETY AND WELLNESS SOLUTIONS
Since its launch in New Zealand in 1999, Pryme has established itself as an international leader in the innovation of safety and wellness solutions. Operating in Australasia and Asia Pacific, Pryme has over 300 distributors and 700 outlets covering the safety, industrial, mining, automotive, electrical, sporting, hardware, mining and pharmaceutical sectors. Its products are used by some of Australia’s largest organisations.
Pryme has a strong international presence, with products in over 10 countries.
Ph: 07 - 3326 1500
Australia, South East Asia. Thailand, New Zealand, Indonesia, Vietnam, Malaysia, Papua New Guinea, South Africa, South Pacific, Singapore, USA (Los Angeles).
CONTACT AUSTRALIA ADDRESS
Unit 10/38, Limestone Street Darra, QLD 4076 PO Box 1298 Kenmore QLD 4069
PHONE
+61 7 3374 4544
FAX
+61 7 3374 4768
WEB
www.pryme.net.au
NEW ZEALAND ADDRESS
52A Stonedon Drive East Tamaki, Auckland PO Box 98726, SAMC Auckland
PHONE
+64 9 272 3075
FAX
+64 9 272 3095
WEB
www.pryme.net.au
SINGAPORE ADDRESS
PHONE FAX WEB
1015 Geylang East Ave 3 #04-105 Singapore 389730 +65 6743 9882 +65 6743 9887 www.ensscom.com
AJ885