New Products
page 2
Air Tools
page 10
Clean-Up Tools
page 18
Air Tools Accessories
page 19
Hand Tools
page 26
Engineering Equipment
page 31
LIQUIDATION SALE!
page 34
Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.
NEW RANGE!
NEW HVLP RANGE!
P RO F ES S I O NA L S P RAY G U N S
See full range on page 2.
HVLP Gravity & Suction Feed Spray Guns HVLP Gravity feed spray guns are now available in 1.3 mm, 1.4 mm & 1.8 mm nozzle sizes.
200 mm Coolant Proof IP54 Dual Scale Digital Caliper • Highly accurate glass scale • USB data output • Meet DIN862 Standard
HVLP Suction feed spray guns are now available in 1.8 mm & 2.0 mm nozzle sizes.
$299 EA
See full range on page 7.
Heavy Duty Air Scaling Hammer
2.6 mm Mini Quick Release Handle
NEW!
• Handle only 100 mm long • Holds all 2.6 mm Ø Deburring Blades.
See full range on page 29.
.00
• Optional Side Handle Included
3/8 Stainless Steel Burr 3 Piece Set See full range on page 16.
• New design burr optimised specially for stainless steel. Shank Dia: 1/4”
Heavy Duty Coil Nailers Heavy Duty 0° Coil Nailer
Heavy Duty 15° Coil Nailer
Nail Shank: 2.03-2.8 MM Fastener Length: 32-65 MM Angle: Flat 0 Degrees Capacity: 200-400 nails Weight: 2.3 Kg
Nail Shank: 2.1-2.8 MM Fastener Length: 32-65 MM Angle: 15 Degrees Capacity: 200-400 nails Weight: 2.0 Kg
$599.00
NEW! $14.00
699
PN: BC2865F1
$140 .00
PN: GDMC1
®
PN: KP4733
Impact Rate: 2,400 BPM Piston Stroke: 26 mm Length: 550 mm Weight: 4.0 Kg
PN: AC-111-008-11
PN: BC2865D1
$599.00
See full range on page 11.
NEW! PN: CBSET3INOX
$129.00
See full range on page 22.
1” Super Duty Impact Wrench • Muffled Exhaust • Muli Position Handle Free Speed: 5,000 RPM Max. Torque: 1,800 Ft/Ibs Length: 275 MM Weight: 7.10 Kg ®
NEW! PN: KP1838A-P
$1,100.00
See full range on page 16.
AB•S
All ACCUD digital measuring devices utilize an Absolute Scale encoding system. This system ensures quick, accurate and reliable measurements in all working environments.
Metric Dial Calipers
USB
Quickly and accurately acquire data points via Mini USB cable. Data can be transfered directly into Excel with no additional software required.
DATA OUTPUT
Dual Scale Economical Digital Calipers
Functions: zero point, mm/inch Measures: Inside, Outside & Depth • USB data output • Meet DIN862
USB
• Shockproof Measures: Inside, Outside & Depth
DATA OUTPUT
150 mm Metric Dial Caliper
200 mm Metric Dial Caliper
300 mm Metric Dial Caliper
150 mm Dual Scale Digital Caliper
200 mm Dual Scale Digital Caliper
300 mm Dual Scale Digital Caliper
Range: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16.5 mm Ext. Jaw Reach: 40 mm
Range: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
Range: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Int. Jaw Reach: 25 mm Ext. Jaw Reach: 64 mm
Range: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm
Range: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
Range: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm
PN: AC-101-008-11
PN: AC-101-012-11
PN: AC-111-006-12
PN: AC-111-008-12
PN: AC-101-006-11
$102
$128
.00
$220
.00
.00
Coolant Proof IP54 Dual Scale Digital Calipers
USB DATA OUTPUT
200 mm Dual Scale Digital Caliper
300 mm Dual Scale Digital Caliper
Range: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm
Range: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
Range: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm
$110
.00
PN: AC-111-008-11
$140
USB DATA OUTPUT
.00
600 mm Dual Scale Digital Caliper
1000 mm Dual Scale Digital Caliper
Range: Outside 0-620 mm/0-24.5” Inside 20-600 mm/0-24” Resolution: 0.01 mm/0.005” Accuracy: ±0.05 mm/0.002” Jaw Reach: 100 mm
Range: Outside 0-1020 mm/0-40.2” Inside 20-1000 mm/0-40” Resolution: 0.01 mm/0.005” Accuracy: ±0.08 mm/0.003” Jaw Reach: 150 mm
PN: AC-118-024-11
$549
.00
$30 .00
Functions: mm/in, zero point Measures: Inside, Outside • Made of hard plastic
• IP67 protection level Measures: Inside, Outside & Depth Functions: zero point, mm/inch
USB DATA OUTPUT
150 mm Dual Scale Coolant Proof Digital Caliper
200 mm Dual Scale Coolant Proof Digital Caliper
300 mm Dual Scale Coolant Proof Digital Caliper
Range: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm
Range: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
Range: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm
PN: AC-112-006-12
$249
.00
PN: AC-112-008-12
$335
Caliper Depth Base Attachment
PN: AC-118-040-11
$1,125
PN: AC-117-006-11
Coolant Proof IP67 Dual Scale Digital Calipers
.00
Functions: zero point, mm/inch, ABS, data preset Measures: Inside, Outside • USB data output
$180 .00
Range: 0-150mm/0-6” Resolution: 0.01mm/0.0005” Accuracy: ±0.1mm
PN: AC-111-012-11
$215
$115
PN: AC-111-012-12
.00
150 mm Plastic Dial Caliper
Functions: zero point, mm/in, ABS Measures: Inside, Outside & Depth • Highly accurate glass scale • USB data output • Meet DIN862 Standard
150 mm Dual Scale IP54 Digital Caliper
PN: AC-111-006-11
$79
.00
.00
PN: AC-112-012-12
$479 .00
For calipers to increase the stability of depth measurement For all calipers which range are 150 mm and 200 mm (beam width is 16 mm) Made of stainless steel
PN: AC-179-000-00
$35 .00
.00
Page 2 - New Products
Metric Dial & Dual Scale Digital Indicators
Dual Scale Vernier Calipers
USB DATA OUTPUT
Functions: zero point, Invert measuring, inch/ mm direction, data preset, ABS • USB data output • Supplied with flat and lug back
Measures: Inside, Outside & Depth • Meet DIN862 Standard • Stain chrome plated reading surface • Made of stainless steel
150 mm Metric Vernier Caliper
200 mm Metric Vernier Caliper
300 mm Metric Vernier Caliper
Range: 0-150 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 15.5 mm Ext. Jaw Reach: 40 mm
Range: 0-200 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
Range: 0-300 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.04/0.002” Int. Jaw Reach: 22 mm Ext. Jaw Reach: 64 mm
PN: AC-120-006-12
$56
.00
PN: AC-120-008-12
$84
PN: AC-120-012-12
$138
.00
.00
Dual Scale Digital Indicator Range: 12.7 mm/0.5” Resolution: 0.01 mm/0.0005” Accuracy: 20 μm
PN: AC-212-010-11
PN: AC-222-010-11
$245 .00
$380 .00
Metric Dial Test Indicators & Stands • 0.01 mm Graduations • Jeweled bearing • Carbide stylus • Double scale spacing • Anti-magnetic copper body • 4 mm & 8 mm Dia clamps.
PN: AC-261-008-11 600 mm Metric Vernier Caliper
1000 mm Metric Vernier Caliper
2000 mm Metric Vernier Caliper
Range: Outside 0-620 mm Inside 20-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm/0.002” External Jaw Reach: 100 mm Int. Jaw Reach: 18 mm
Range: Outside 0-1020 mm Inside 20-1000 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.08 mm/0.003” External Jaw Reach: 140 mm Int. Jaw Reach: 24 mm
Range: Outside 0-2020 mm Inside 20-2000 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.14 mm/0.006” External Jaw Reach: 200 mm Int. Jaw Reach: 24 mm
$315
.00
PN: AC-127-040-11
$899
Range: 0.8 mm Graduation: 0.01 mm Accuracy: ±13 μm
$110 .00
Dial Test Indicator Centering Holder Dial Test Indicator Centering Holder. For centering of cylinders or holes.
Available in
2016
.00
Jeweled Bearing Metric Dial Indicator Range: 10 mm Accuracy: 20 μm
Measures: Inside, Outside • Meets DIN862 Standard
PN: AC-127-024-11
• Limit hands • Jeweled bearing • 1 mm range per dial revolution • Lug back
PN: AC-269-060-01
$29 .00
Dial Indicator & Micrometers Stands
600 mm Metric Vernier Long Jaw Caliper Range: Outside 0-620 mm/0-24.5” Inside 20-600 mm/0-24” Graduation: 0.002 mm/0.001” Accuracy: ±0.08 mm/0.003” Ext. Jaw Reach: 250 mm Int. Jaw Reach: 24 mm
Measures: Inside, Outside • With fine adjustment • Stain chrome reading surface
Available in
PN: AC-281-060-01
2016
$45
.00
Magnetic Indicator Stand with Fine adjustment Ø8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf Fine adjustment.
150 mm Metric Depth Micrometer
Micrometer head accuracy: ±3μm Rod accuracy: ±(2+L/75)μm, L is the measuring range in mm Supplied with rods Ratchet stop
Range: 0-150mm Accuracy: ±31μm Base Span: 101.5 mm Base Width: 17 mm
PN: AC-281-060-02
$40 .00
Magnetic Indicator Stand Ø8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf
PN: AC-280-000-02
$119 .00
PN: AC-391-006-01
PN: AC-381-000-00
$245 .00
$39 .00
Magnetic 10 mm Dial Gauge Base Kit
100 mm Micrometer Stand
Magnetic 10 mm Dial Gauge base kit
Micrometer Stand suits micrometers that measure up to 100 mm.
Page 3 - New Products
25 mm Coolant Proof Dual Scale Digital Micrometer
Metric Outside Micrometers
Functions: mm/inch, origin, zero point, ABS, hold, data export • IP65 protection level • Carbide measuring faces • Ratchet stop.
USB DATA OUTPUT
• Carbide measuring faces • Ratchet stop
25 mm Metric Outside Micrometer
25-50 mm Metric Outside Micrometer
Range: 0-25 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 29 mm
Range: 25-50 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 39 mm
PN: AC-321-001-01
$45 .00
$50 .00
75-100 mm Metric Outside Micrometer
Range: 50-75 mm Graduation: 0.01 mm Accuracy: 5 μm Jaw Reach: 53 mm
Range: 75-100 mm Graduation: 0.01 mm Accuracy: 5 μm Jaw Reach: 65 mm
$59
.00
$215 .00
$64
75 mm Metric Micrometer 3 Piece Set
150 mm Metric Micrometer 6 Piece Set
Set consists of 3 Micrometers Range: 0-75 mm Graduation: 0.01 mm Accuracy: 5 μm
Set consists of 6 Micrometers Range: 0-150 mm Graduation: 0.01 mm Accuracy: 5 μm
PN: AC-321-003-03
$185
PN: AC-321-004-01
.00
Metric Dial Bore Gauges
.00
PN: AC-321-006-06
$380 .00
Dual Scale Vernier Height Gauges 18-160 mm Metric Dial Bore Gauge Set Set consists of 18-35 mm, 35‑60 mm & 50‑160 mm Bore Gauges & Dial Indicator Dial indicator Range: 10 mm Graduation: 0.01 mm
PN: AC-251-346-13
$579 .00
• Meets DIN862 Standard
• Move main scale to set zero with adjustable scale • Carbide tipped scriber • Satin chrome plated scale • Vernier magnifier
300 mm Metric Vernier Height Gauge Range: 0-300 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.04 mm Slide Rail Width: 28 mm Length: 545 mm
50-160 mm Metric Dial Bore Gauge Range: 50-160 mm Graduation: 0.01 mm Accuracy: ±0.018 mm Length: 141 mm
PN: AC-186-012-11
$349 .00
600 mm Metric Vernier Height Gauge
PN: AC-251-160-11
$225
PN: AC-313-001-01
Metric Micrometer Sets
PN: AC-321-002-01
50-75 mm Metric Outside Micrometer PN: AC-321-003-01
Range: 0-25 mm/0-1” Resolution: 0.001 mm/0.00005” Accuracy: 2 μm Jaw Reach: 24 mm
.00
Range: 0-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm Slide Rail Width: 35 mm Length: 870 mm
PN: AC-186-024-11
$479 .00
50-600 mm Metric Tubular Inside Micrometer
Supplied with setting standards Carbide measuring faces
Combination Square Set
Set consists of 13, 25, 50, 100, 150 & 200 mm Extension Rods. Micrometer Head Travel: 13 mm Range: 50-600 mm Graduation: 0.01 mm Accuracy: (3+n+L/50) μm, n=number of rods, L=max. measuring length
PN: AC-817-180-02
$199 .00
PN: AC-352-024-01
$375 .00
Page 4 - New Products
Protractor: Used to set or make an angle measurement, Range: 0-180° Accuracy: ±7’ Square: Used as 90° or 45° square 90° square accuracy: ±8’, 45° square accuracy: ±10’ Rule: Used as rule, range: 300 mm/12” Center finder: Used to find the cylinder center, Accuracy: ±0.15 mm
Suprabeam warrants its products to be free from defects in materials and workmanship. Any product or part which is found to be defective under normal use will be repaired or replaced.
Miniature Torch
The Ultimate Miniature
120
80
Lumens
Lumens
3 Hour battery life 1 x AAA
280
FLOOD ENT ATTACHM
$85 6 Hour battery life 1 x AA or NiMh
$85
.00
Beam: Spot 5° Flood 60°
Tactical Extreme Power
350 Lumens
PN: SBQ3
PN: SBQ2
.00
Beam: Spot 5° Flood 65°
E FRE LIGHT
Lumens
PN: SBQ1MINI
$55
Compact & Powerful
10 Hour battery life 3 x AAA
PN: SBQ7C
$129.00
.00
Beam: Spot 5° Flood 60°
8 Hour battery life 4 x AAA or NiMh
Beam: Spot 5° Flood 70°
Body: Double Anodized Aluminium Brightness: 80 Lumens Beam: Focus by rotating Weight: 38 G Size: 98 mm x Ø15 mm
Body: Double Anodized Aluminium Brightness: 120 Lumens Beam: Hyperfocus by sliding Weight: 80 G (inc batteries) Size: 116 mm x Ø26 mm Complete with durable pouch
Light Weight Headlamp
Rechargeable & F R E E Rechargeable & Powerful Rechargeable & Powerful T FLOOD LIGH T Compact ATTACHMEN
250
400
Lumens
Lumens
PN: SBQ3R 20 Hour battery life Spot 5° Flood 60° 3 x AAA
$89.00
Body: Anodized Aluminium/Plastic Brightness: 250(Boost) 15-150 (Dimmer) Beam: Hyperfocus by sliding floodlight spotlight to 220m range Headband: fits 50-70 cm Battery: 3 x AAA: 20h life Weight: 140 G inc battery
Head Light
$225
PN: SBV3AIR
PN: SBV3
C/W durable pouch, washable headband
mens
PN: SBQ4XR
PN: SBQ7XR
$279.00
.00
$339.00 2-9 Hour battery life Li Ion 26650 Beam: Spot 6° Rechargeable Flood 70° (spare battery included)
Body: Double Anodized Aluminium Brightness: 400 Lumens (on Boost) 250 Lumens (on high) 50 Lumens / Low and Strobe Beam: Hyperfocus by sliding Weight: 139 G inc battery Size: 127.7 mm x Ø26.5 mm
Body: Double Anodized Aluminium Brightness: 680 Lumens (on Boost) 350 Lumens (on high) 50 Lumens / Low and Strobe Beam: Focus by sliding Weight: 132 G inc battery Size: 134 mm x Ø32 mm
Body: Double Anodized Aluminium Brightness: 900 Lumens (on Boost) 400 Lumens (on high) 170 Lumens / Low and Strobe Beam: Focus by sliding Weight: 307 G inc battery Size: 150 mm x Ø46 mm
Rechargeable
PN: SBV3R
$239.00
400
Suprabeam Accessories Bike Attachment
Flood Light Attachment
Suits for the Q3 torch
Convert your torch or head torch into a compact flood light for workshop, car or camping. Suits SBQ3, SBQ3R, SBV3 & SBV3R
Lumens
Lumens
Body: Anodized Aluminium/plastic Lumens: 320(high) 30 (reduced) Beam: Hyperfocus by sliding floodlight - spotlight to 180 m range Headband: fits 50-70cm Battery: 3 x AAA: 20h life Weight: 160 G inc battery
9Lu 00
mens
3-6 Hour battery life Li Ion 18650 Beam: Spot 5° Rechargeable Flood 60° (spare battery included)
$119.00 Head Light
Flood 60° 4 x AAA
6Lu 80
Body: Double Anodized Aluminium Brightness: 350 Lumens Beam: Hyperfocus by sliding Weight: 196 G (inc batteries) Size: 134 mm x Ø39 mm Complete with durable pouch
3-6 Hour battery life Li Ion 18650 Rechargeable Beam: Spot 5° (spare battery included) Flood 60°
320
20 Hour battery life Spot 5°
Body: Double Anodized Aluminium Brightness: 280 Lumens Beam: Hyperfocus by sliding Weight: 99 G Size: 115 mm x Ø26 mm Complete with durable pouch
20 Hour battery life Spot 6°
Flood 60° Li-ion Rechargeable
Body: Anodized Aluminium/plastic Brightness: 400 Lumens (on boost) 200 Lumens (on high) 20 Lumens (reduced) Beam: Hyperfocus by sliding floodlight - spotlight to 180 m range Headband: Fits 50-70cm Battery: LI-ion: 20h life Weight: 184 G (Including battery)
PN: SBCAMPINGBULB
$22.00
PN: SBBIKEHOLDER
$22
.00
Traffic Wand
Q3 / V3 Colour Filters
PN: SBQ3W
Includes Blue, Red, Green & Yellow filters.
The Q3 Traffic Wand for those unexpected emergencies.
C/W durable pouch, washable headband Page 5 - New Products
PN: SBQ3W
$15.00
PN: SB3CF
$49.00
P RO F ES S I O NA L S P RAY G U N S
K818 Gravity Feed Spray Guns
$259 EA
Short fluid passages offer quicker cleaning and maintenance. Gravity feed requires less air pressure to drive fluid feed, resulting in a higher quality finish across a wide fluid viscosity range.
K818 Gravity Feed 1.3 MM Spray Gun Applications: 2-Pack, Metallics, Enamel, Stain
Applications: 2-Pack, Metallics, Enamel, Stain
Working Pressure: 30-45 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M14 × 1.0P Weight: 280 G
Nozzle: 1.3 MM S-Steel Pattern Width: 305 MM Air Cons.: 7.5 cfm Fluid Output: 210 ML
Nozzle: 1.4 MM S-Steel Pattern Width: 310 MM Air Cons.: 7.5 cfm Fluid Output: 220 ML
• Exceptional fluid atomization. • Forged aluminum body with smooth anodised finish for corrosion resistance & easy cleaning. • Teflon seals & packing. • Suitable for both oil and water‑based painting. • High grade stainless steel nozzle & needle for easy cleaning & long service life. • Complies to CE standards.
K818 Gravity Feed 1.8 MM Spray Gun
K818 Gravity Feed 2.5 MM Spray Gun
K818 Gravity Feed 1.4 MM Spray Gun PN: K818M14
PN: K818M13
PN: K818M25
PN: K818M18 Applications: 2-Pack, Metallics, Acrylic, Enamels, Primer, Stains.
Applications: Heavy viscosity fluids, Glue, Spray Putty.
Nozzle: 1.8 MM S-Steel Pattern Width: 330 MM Air Cons.: 7.8 cfm Fluid Output: 300 ML
Nozzle: 2.5 MM S-Steel Pattern Width: 350 MM Air Cons.: 7.8 cfm Fluid Output: 380 ML
K818 Suction Feed Spray Guns Suction provides a mild agitating action to the fluid as the gun is being used. Suction Feed Spray Guns can carry larger amounts of paint while retaining gun stability. The configuration of the fluid pot offers access to tighter working spaces. Achieves quality finishes with light viscosity paints or stains. Suitable for adhesive coatings, specialised coatings or textured finishes. Working Pressure: 30-45 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: M14 × 1.0P Weight: 514 G
K818 Suction Feed 1.3 MM Spray Gun
$259 EA
PN: K818S13
• Forged aluminum body with smooth anodised finish for easy cleaning. • Suitable for low viscosity oil and water-based painting.
• High grade stainless steel nozzle & needle for easy cleaning & long service life. • Complies to CE standards • Teflon seals & packing.
K818 Suction Feed 2.0 MM Spray Gun
K818 Suction Feed 2.5 MM Spray Gun PN: K818S25
PN: K818S20
Applications: 2-Pack, Metallics, Enamels, Polyurethanes.
Applications: Heavy viscosity fluids, Acrylics, Enamels, Primer, Glue, Stains.
Applications: Heavy viscosity fluids, Glue, Spray Putty.
Nozzle: 1.3 MM S-Steel Pattern Width: 305 MM Air Cons.: 7.5 cfm Fluid Output: 200 ML
Nozzle: 2.0 MM S-Steel Pattern Width: 340 MM Air Cons.: 7.8 cfm Fluid Output: 340 ML
Nozzle: 2.5 MM S-Steel Pattern Width: 350 MM Air Cons.: 7.8 cfm Fluid Output: 380 ML
K320 Mini Gravity Feed Spray Guns
$179 EA
Working Pressure: 30-45 PSI Fluid Capacity: 125 CC Fluid Feed: Gravity Fluid Inlet: M15 Weight: 280 G • Chrome & Nickel-plated aluminum body. • High grade stainless steel nozzle & needle. • Teflon seals & packing. • Suitable for both oil and water-based painting. Page 6 - New Products
K320 Gravity Feed 0.8 MM Spray Gun PN: K320M08 Nozzle: 0.8 MM S-Steel Pattern Width: 140 MM Air Cons.: 3.2 cfm Fluid Output: 80 ML
NEW!
K320 Gravity Feed 1.2 MM Spray Gun PN: K320M12 Nozzle: 1.2 MM S-Steel Pattern Width: 140 MM Air Cons.: 3.2 cfm Fluid Output: 100 ML
NEW HVLP RANGE! $299 EA
KH818 Gravity Feed HVLP Spray Guns The combination of HVLP technology and gravity feed spray guns offers many benefits. High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The benefit of this technology is a more efficient transfer of paint, while consuming less air. The configuration of gravity feed spray guns provide a constant supply of fluid pressure to the spray cap, offering the ability to work with both light and heavy viscosity fluids. Working Pressure: 20~28 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M16 Weight: 514 G
KH818 Gravity Feed 1.3 MM Spray Gun PN: KH818M13
• Exceptional fluid atomization. • Forged aluminum body with smooth anodised finish for corrosion resistance & easy cleaning. • Teflon seals & packing. • Includes mini air regulator
KH818 Gravity Feed 1.4 MM Spray Gun PN: KH818M14
• Suitable for both oil and water‑based painting. • High grade stainless steel nozzle & needle for easy cleaning & long service life. • Complies to CE standards.
KH818 Gravity Feed 1.8 MM Spray Gun PN: KH818M18
Applications: 2 Pack, stains, enamels, polyurethanes
Applications: 2 Pack, stains, enamels, polyurethanes
Applications: Acrylics, enamels, Metallics, Lacquers
Nozzle: 1.3 MM S-Steel Pattern Width: 300 MM Air Cons.: 9.6 cfm Fluid Output: 140 ML
Nozzle: 1.4 MM S-Steel Pattern Width: 310 MM Air Cons.: 9.6 cfm Fluid Output: 150 ML
Nozzle: 1.8 MM S-Steel Pattern Width: 320 MM Air Cons.: 9.9 cfm Fluid Output: 200 ML
KH818 Suction Feed HVLP Spray Guns The main advantage of Suction Feed Spray Guns is that they can carry larger amounts of paint while retaining gun stability. Suction Feed Spray Guns are suitable for adhesive coatings, specialised coatings or textured finishes. High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The configuration of suction feed pots provide a mild agitating action to the fluid as the gun is being used. Working Pressure: 20-28 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: 3/8” Weight: 514 G
NEW HVLP RANGE! $299 EA
• Forged aluminum body with smooth anodised finish for easy cleaning. • Includes mini air regulator • Suitable for low viscosity oil and water-based painting.
• High grade stainless steel nozzle & needle for easy cleaning & long service life. • Complies to CE standards • Teflon seals & packing.
KH818 Suction Feed KH818 Suction Feed 1.8 MM Spray Gun 2.0 MM Spray Gun PN: KH818S18
PN: KH818S20
Applications: Acrylics, enamels, polyurethanes, Metallics, Lacquers.
Applications: Acrylics, Glue, enamels, polyurethanes, Metallics, Lacquers, Primer.
Nozzle: 1.8 MM S-Steel Pattern Width: 310 MM Air Cons.: 7.8 cfm Fluid Output: 180 ML
Nozzle: 2.0 MM S-Steel Pattern Width: 320 MM Air Cons.: 7.8 cfm Fluid Output: 210 ML
SG420 Gravity Feed Air Brush
PN: SG420A
$110.00
SG420A air brush is suitable for fine touch‑up and custom detailing applications. All metal parts with high quality stainless steel nozzle and needle for easy cleaning. Achieve high levels of control with this fully adjustable gravity feed air brush.
SG420A Gravity Feed Air Brush Nozzle: 0.3 MM Working Pressure: 14-50 PSI Air inlet: 1/8” Fluid Output: 7 CC Fluid Capacity: 7 CC Fluid Feed: Gravity Weight: 280 G
Page 7 - New Products
Applications: Acrylics, Enamels, Stains. • Side mount adjustable fluid pot. • Chrome-plated metal body for easy cleaning. • Suitable for both oil and waterbased painting.
NEW PRODUCTS P RO F ES S I O NA L S P RAY G U N S
Pressure Feed Spray Gun Systems Spray large quantities of fluid without the need to refill a smaller gun‑mounted pot. Another benefit of pressure feed systems is a lighter and easier to handle spray gun. Pressure Feed Spray Gun Systems includes fluid tank, hose and Prowin K818 Spray Gun with your choice of 1.2, 1.5, 1.8, 2.0 or 2.5 MM nozzle. See spray gun specications at the bottom of the page.
2 Litre Pressure Feed Spray Gun System Features: • Tank Pressure Regulator • Air release valve • Safety release valve • Tank handle/hanger • Complies to CE standards
10 Litre Pressure Feed Spray Gun System Features: • 3 meter hose • Tank Pressure Regulator • Air release valve • Safety release valve • Tank handle/hanger • Complies to CE standards
2 Litre Pressure Feed Tank Hose: 8 MM ID x 3 M (PU+Nylon) Tank dimensions: 130L MM x 130W MM x 445H MM Capacity: 2 Litre Tank: Aluminium Max. pressure: 60 PSI Weight total: 2.15 Kg
10 Litre Pressure Feed Tank Hose: 8 MM ID x 3 M (PU+Nylon) Tank dimensions: 315L MM x 315W MM x 485H MM Capacity: 10 Litre Tank: Aluminium Max. pressure: 60 PSI Weight total: 10.1 Kg
$695 EA 1.3 mm Nozzle 1.5 mm Nozzle 1.8 mm Nozzle 2.0 mm Nozzle 2.5 mm Nozzle
$499 EA 1.3 mm Nozzle 1.5 mm Nozzle 1.8 mm Nozzle 2.0 mm Nozzle 2.5 mm Nozzle
PN: PW10LTRK12 PN: PW10LTRK15 PN: PW10LTRK18 PN: PW10LTRK20 PN: PW10LTRK25
PN: PW2LTRK12 PN: PW2LTRK15 PN: PW2LTRK18 PN: PW2LTRK20 PN: PW2LTRK25
20 Litre Pressure Feed Spray Tank System The design of a pressure feed spray system offers a lighter and easier to handle spray gun and the ability to spray large quantity of fluid without the need to refill a smaller gun‑mounted pot. The 20 Litre Pressure Feed Spray Tank System includes a Prowin K818 1.8 MM Spray Gun, 20 litre fluid tank with manual agitation and 10 Meter supply hose. Features: • 10 meter hose • Stainless Steel Liner • Tank Pressure Regulator • Air release valve • Safety release valve • Manual Agitation • Complies to CE standards
K818 Pressure Feed 20 Litre Pressure Feed Tank Hose: 8 MM ID x 10 M (PU+Nylon) Tank dimensions: 400L MM x 400W MM x 780H MM Capacity: 20 Litre Tank: Aluminium Max. pressure: 60 PSI Weight total: 26 Kg
$1395 EA 1.3 mm Nozzle 1.5 mm Nozzle 1.8 mm Nozzle 2.0 mm Nozzle 2.5 mm Nozzle
PN: PW20LTRK12 PN: PW20LTRK15 PN: PW20LTRK18 PN: PW20LTRK20 PN: PW20LTRK25
Pressure Feed Spray Guns K818 Pressure Feed 1.5 MM Spray Gun
K818 Pressure Feed 1.2 MM Spray Gun Nozzle: 1.2 MM S-Steel Working Pressure: 30-45 Pattern Width: 300 MM Air Cons.: 7.5 CFM Fluid Output: 170 ML Fluid Inlet: 3/8”
PSI
Nozzle: 1.5 MM S-Steel Working Pressure: 30-45 Pattern Width: 315 MM Air Cons.: 7.5 CFM Fluid Output: 240 ML Fluid Inlet: 3/8”
K818 Pressure Feed 1.8 MM Spray Gun PSI
Nozzle: 1.8 MM S-Steel Working Pressure: 30-45 Pattern Width: 330 MM Air Cons.: 7.8 CFM Fluid Output: 300 ML Fluid Inlet: 3/8”
Page 8 - New Products
K818 Pressure Feed 2.0 MM Spray Gun PSI
Nozzle: 2.0 MM S-Steel Working Pressure: 30-45 Pattern Width: 340 MM Air Cons.: 7.8 CFM Fluid Output: 340 ML Fluid Inlet: 3/8”
K818 Pressure Feed 2.5 MM Spray Gun PSI
Nozzle: 2.5 MM S-Steel Working Pressure: 30-45 Pattern Width: 350 MM Air Cons.: 7.8 CFM Fluid Output: 380 ML Fluid Inlet: 3/8”
PSI
NEW PRODUCTS 50 mm Quick-Lock Sanding Discs
Pack of 5.
$9.00 EA
2” Quick-Lock Preparation Kit
3” Quick-Lock Preparation Kit
7 Piece kit includes 1 of each: 1/4” shank, 2” backing pad, 24 Grit 2” disc, 36 Grit 2” disc, 50 Grit 2” disc, Brown (Coarse) surface prep 2” disc & Maroon (Medium) surface prep 2” disc.
7 Piece kit includes 1 of each: 1/4” shank, 3” backing pad, 24 Grit 3” disc, 36 Grit 3” disc, 50 Grit 3” disc, Brown (Coarse) surface prep 3” disc & Maroon (Medium) surface prep 3” disc.
36 Grit Sanding Discs 80 Grit Sanding Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012S80 PN: AB22012S36 60 Grit Sanding Discs 120 Grit Sanding Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012S60 PN: AB22012S120
75 mm Quick-Lock Pack of 5. $14.00 EA Sanding Discs
36 Grit Sanding Discs 80 Grit Sanding Discs 75 mm Quick-Lock (Pack of 5) 75 mm Quick-Lock (Pack of 5) PN: AB22013S80 PN: AB22013S36
50 mm Quick-Lock Pack of 5. $22.00 EA Mini Flap Discs
40 Grit Mini Flap Discs 80 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012F40 PN: AB22012F80 60 Grit Mini Flap Discs 120 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012F120 PN: AB22012F60
PN: GPK2
$29
PN: GPK3
$39.00
.00
50 mm Velcro Backing Pad
75 mm Velcro Backing Pad
Attaches velcro pads to tool. Backing Pad: 50 mm Shank Dia.: 1/4”
Attaches velcro pads to tool. Backing Pad: 75 mm Shank Dia.: 1/4” PN: GPA75
PN: GPA50
$28.00
$36.00
Pocket Blow Gun
4”″Rubber Tipped Blow Gun
• Rubber Tip • Roll Throttle Length: 115 mm Inlet: Japanese Compatible Fitting Material: Aluminium/POM
75 mm Quick-Lock $33.00 EA Mini Flap Discs
Pack of 5.
• Integrated metal inlet thread • Rubber Tip PN: PBGN
$13.00
PN: GP1562
$15.00
Length: 110 mm Inlet: Japanese Compatible Fitting Material: POM/Steel
Extendible Blow Gun • Adjustable nozzle length. 40 Grit Mini Flap Discs 80 Grit Mini Flap Discs 75 mm Quick-Lock (Pack of 5) 75 mm Quick-Lock (Pack of 5) PN: AB22013F40 PN: AB22013F80 60 Grit Mini Flap Discs 120 Grit Mini Flap Discs 75 mm Quick-Lock (Pack of 5) 75 mm Quick-Lock (Pack of 5) PN: AB22013F120 PN: AB22013F60
• 360° adjustable nozzle angle. • Locking ring. • Integrated metal inlet thread Length: 270 to 390 mm Inlet: Japanese Compatible Fitting Material: POM/Steel
Page 9 - New Products
PN: GP1562E
$24.00
TRADE QUALITY Pneumatic Tools & Fasteners
RATCHET WRENCHES
IMPACT WRENCHES 1/2” Twin Hammer Impact Wrench Max Torque: 685 Ft/lb Weight: 1.94 Kg For Heavy automotive and truck work, such as tyre changing, shock, spring work and front end work where extra powerful tools are needed.
HUGE
1/2” Ratchet Wrench
Max Torque: 30 Ft/lbs Length: 182 MM Weight: 0.63 Kg
Max Torque: 70 Ft/lbs Length: 306 MM Weight:1.3 Kg
POWER!
$169
$299.00
.00
PN: BIP114A1
$199
PN: BIT242
$239
.00
PN: BIT3110
$259.00
3/8” Impact Wrench
1/2” Impact Wrench
Max Torque: 70 Ft/lbs Free speed: 160 RPM Length: 306 MM Weight: 1.3 Kg
Free Speed: 10,000 RPM Max Torque: 190 Ft/lbs Weight: 1.23 Kg Length: 158 MM
Free Speed: 7,500 RPM Max Torque: 500 Ft/lbs Weight: 2.57 Kg Length: 197 MM
CUTTING, GRINDING & HAMMING TOOLS 1/4” Medium Die Grinder
1/4” 115° Angle Die Grinder
Collet Size: 1/4" Free Speed: 20,000 RPM Weight: 0.55 Kg
Collet Size: 1/4" Free Speed: 20,000 RPM Length: 178 MM Weight: 0.75 Kg
$159
$189.00
.00
PN: BIT242-2
.00
3/8” Butterfly Impact
PN: BG210R
PN: BRP207B1
PN: BRP003B1
PN: BIT260M1
PN: BIK107A1
$169
1/4” Mini Ratchet Wrench
$599.00
1/2’’ Impact Wrench with 2’’ Extended Anvil
3/4” Twin Hammer Impact Wrench
Max Torque: 490 Ft/lbs Free Speed: 7,500 RPM Weight: 2.87 Kg Length: 236 MM
Max Torque: 1,100 Ft/lbs Free Speed: 5,500 RPM Weight: 5.72 Kg Length: 227 MM
3” Cut Off Tool
PN: BG230RA1
$189.00
.00
1/4” 5” Extended Die Grinder
1/4” Angle Die Grinder
Collet Size: 1/4" Free Speed: 21,000 RPM Length: 280 MM Weight: 0.80 Kg
Collet Size: 1/4" Free Speed: 18,000 RPM Length: 178 MM Weight: 0.80 Kg
$189.00
$189
$139.00
3” Cut Off Discs pkt 5 Discs only 0.8 mm thick. Ø75 x 0.8 x Ø9.53 mm Speed Rated to 25,000 RPM
PN: CO007K
$16.00
2” Angle Grinder
PN: BG220RA1 PN: BG215RA1
PN: BCTA1
Free Speed: 21,000 RPM Length: 195 MM Weight: 0.8 Kg
.00
Air Hammer Kit
Spring Retainer
Air Hammer Kit includes: 5 chisels and quick change spring retainer Impact Rate: 2,900 BPM
Suits most Air Hammers Packet of 2. PN: GPA70X2
$12
.00
PN: BHA67A1
$229.00 12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.
Free Speed: 15,000 RPM Length: 188 MM Weight: 0.8 Kg
$189.00
50 Mm (2”) Angle Grinder Disc Suits BG222RA1 Rated Speed: 23,000 RPM Size: 50 x 4 x 9.53 mm
Page 10 - Air Tools
PN: BG222RA1
PN: 3510232
$8.50
TRADE QUALITY Pneumatic Tools & Fasteners
NAIL & STAPLER GUNS
50 MM C1 Bradder
Nail Shank: 1.00 MM x 1.25 MM Nail Length: 16-50 MM Capacity: 100 Nails Weight: 1.50 Kg
34° DA Nailer Nail Shank: 1.8 MM Fastener Length: 25-64 MM Angle: 34° Capacity: 100 Nails Weight: 1.90 Kg
Light Duty Stapler 6000/L Series Stapler
Medium Duty 80 Series Stapler
PN: B1850A1
$249
.00
Staple Crown: 12.8 MM (80 Series) Staple Length: 6-16 MM Capacity: 100 Staples Weight: 0.90 Kg
PN: BA3464A1
$389
.00
PN: BS9025PA2
$169
.00
Staple Crown: 5.8 MM (6000/L Series) Staple Length: 13 MM - 40 MM Capacity: 160 Staples Weight: 1.70 Kg
32 MM C1 Bradder
Heavy Duty
PN: B9040A1
$359
Nail Shank: 2.2 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg
Nail Shank: 1.00 x 1.25 MM Nail Length: 10-32 MM Capacity: 100 Nails Weight: 0.60 Kg
Staple Crown: 5.8 MM (6000/L Series) Length: 13-25 MM Capacity: 100 Staples Weight: 0.60 Kg
Heavy Duty Stapler
2.2 MM T-Nailer
.00 C-Brad Stapler Nail Shank: 1.4 MM x 1.6 MM Fastener Length: 1950 MM Capacity: 100 Weight: 2.00 Kg
PN: BN8016E
$169
.00
Staple Crown: 4.5 MM (97 Series) Staple Length: 10-25 MM Capacity: 142 Staples Weight: 1.2 Kg
PN: BT2264A1
$399
.00
PN: B1832PA2
$159
Standard 97 Series Stapler
.00
PN: B1650B1
2.5 MM T-Nailer Nail Shank: 2.5 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg
Medium Duty 6000/L Series Stapler Staple Crown: 5.8 MM (6000/L Series) Staple Length: 13-40 MM Capacity: 100 Staples Weight: 1.18 Kg
$339.00
Medium Duty C-Brad Nailer Nail Shank: 1.4-1.6 MM Fastener Length: 19-50 MM Capacity: 100 Nails Weight : 1.50 Kg
SANDERS 6” Random Orbital Sander
Disc Size: 6"Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg
PN: BOS156A1
$229.00 8” Geared Central Vac Sander (non self generating)
$185.00
PN: BT2564A1
$399.00
PN: BS9040LA1
$259.00
PN: B1650LA1
$259.00
NAIL GUN OIL
6” Random Orbital Self Generating Dust Free Sander
Disc Size: 6" Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg
PN: BS9725B1
Basso Nail Gun Oil 250 ML
PN: BO250
Basso Nail Gun Oil 1 Liter
PN: BO1000
$9.50 $17
PN: BOS156SA1
$249.00
8” Geared Sander Free Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.00 Kg
Free Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.05 Kg
PN: BOS258GR-D1 PN: BOS258GRC-D1
$439
.00
Page 11 - Air Tools
$429.00
12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.
AIR TOOLS
SURFACE PREP TOOL & ACCESSORIES
Air Hammer Kit
5” Disc Sander
Kit includes 5 Chisels, Oiler, Spring Retainer and Case.
c/w 3”, 4” & 5” Discs. 50 mm Surface Pads and Adapter Free Speed: 16,000 RPM
Shank Size: 10.2 mm (round) Stroke Length: 19.05 mm Free Speed: 3,000 BPM Weight: 1.70 Kg
$118
$98.00
Heavy Duty Quick Change
$28.00 EA
PN: GP1204R
PN: GP102KD
Spring Retainer For Air Hammers
PN: GPA2311
$45
.00
.00
50 mm Abrasive Pads
50 mm Backing Pad
75 mm Backing Pad
Attach abrasive pads to tool. Includes 1/4” shank adapter.
Attach abrasive pads to tool. Includes 1/4” shank adapter.
PN: GPA1523K
Pad Size: 6” (velcro) Orbit Diameter: 7 mm Free Speed: 9,000 RPM Weight: 2.0 Kg
Blue 50 mm Fine Abrasive Pad Packet of 10 PN: GPA1527X10 Maroon 50 mm Medium Abrasive Pad Packet of 10 PN: GPA1528X10
PN: GPA1524K
$15.00
SANDERS 6” Random Orbital Sander
12 Months Factory Warranty
$19
50 mm Q/Change Felt Polishing Pad
Brown 50 mm Coarse Abrasive Pad Packet of 10 PN: GPA1526X10
.00
75 mm Q/Change Felt Polishing Pad
PN: GP1205
$129.00 PN: GPA1525
$8
Straight Line Sander
Takes 70 x 445 mm clip on paper. Suits flat automotive panel work. Pad Size: 397 x 68 mm Free Speed: 2,500 RPM Weight: 2.5 Kg PN: GP1203
$179.00
$12
.00
Taper Spindle
Calico Polish Mop
1/4” Round Shank
Suits TS12 Taper Spindle 50 mm Diameter
PN: TS12
$39.00
$49.00 EA
PN: GPA1575
.00
PN: PMC50
75 mm Abrasive Pads Brown 75 mm Coarse Abrasive Pad Packet of 10 PN: GPA1529X10 Blue 75 mm Fine Abrasive Pad Packet of 10 PN: GPA1530X10
$28.00
8 Piece Flap Wheel Kit
SANDBLASTER Ideal for spot and rust removal 9 Oz capacity
Kit includes: 25 mm x 12 mm, 120 Grit, x 1 25 mm x 25 mm, 40 Grit, x 1 25 mm x 25 mm, 80 Grit, x 1 40 mm x 25 mm, 60 Grit, x 1 40 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 60 Grit, x 2
PN: GFWK
$49.00
PN: GPASB100
$55.00
NEEDLE SCALERS
Straight Needle Scaler
Air Needle Scaler & Flux Chipper Kit
Free Speed: 4000 BPM
PN: GP201
Air Caulking Gun
$289.00 Needle Scaler Attachment Fits most Air Hammers
PN: GPA1352A-3
$74.00
Takes 300 G Cartridges Recommended air pressure 15-40 PSI
• Combo Tool Kit includes blow mold case, 1 x Moil Point, 1 x 20 mm Flat Chisel 1 x 35 mm Bent Chisel, 1 x Needle Attachment.
Page 12 - Air Tools
PN: GP60012 PN: GP268K
$379.00
$79.00
AIR TOOLS 7” SANDERS & POLISHERS
SANDING ACCESSORIES 6”(150 mm) Velcro Pad
5/16” External Thread
12 Months Factory Warranty
6” (150 mm) Velcro Dust Free Pad
5/16” External Thread • Dust Free
7” Disc Sander PN: F6565
PN: F6505
$32
$35
.00
.00
7” Angle Polisher
Spindle: Male 5/8-11UNC Free Speed: 4,500 RPM Weight: 2.6 Kg Avg Air Cons.: 12 cfm
PN: GP1206A
$255
.00
BELT SANDERS 100% Merino sheep skin wool pile with tie cord.
10 mm Belt Sander
Spindle: Male 5/8-11UNC Free Speed: 2,500 RPM Weight: 2.6 Kg Avg Air Cons.: 12 cfm
PN: GP1206P
$255.00
20 mm Belt Sander Belt Size: 20 x 520 mm
Belt Size: 10 x 330 mm
Max. speed: 2,500 RPM Thickness: 32 mm 5" (125 mm) Merino Wool Sheep Skin Polishing Bonnet. PN: FP40005
$26
.00
7" (180 mm) Merino Wool Sheep Skin Polishing Bonnet. PN: FP40015
$32.00
$219
10 mm BELTS
PN: FP36155
$49.00
100 mm Nylon Pad M10 x 1.5 Int. Thread Includes Lock Nut
125 mm Nylon Pad M14 x 2 Int. Thread Includes Lock Nut
PN: FP20020
$319.00
.00
150 mm Velcro Pad M14 x 2 Int. Thread
PN: GP1265A
PN: GP1264A
20 mm BELTS
$19.00
PN: FP20210
40 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP40
80 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP80
120 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP120
60 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP60
100 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP100
$25.00 Pkt
40 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP40
80 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP80
60 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP60
100 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP100
120 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP120
$38.00 Pkt
$21.00
Air Rust & Paint Removal Tool Kit (Non-vacuum)
178 mm Nylon Pad M14 x 2 Int. Thread Includes Lock Nut
PN: FP20410
$39
.00
Versatile support handle can be set to any position within it’s 180 ° range.
5” Rubber Turbo Backing Pad 5/8 x 11” Internal Thread. PN: GTP162258 M14 int thread PN: GTP162214
7” Rubber Turbo Backing Pad
$25
.00
$559.00
EA
5/8 x 11” Internal Thread. PN: GTP1736 M14 int thread PN: GTP1737
PN: GP2001A
$49.00 EA
Kit includes: Spare disc hub, five 105 mm (4 inch) stripping wheels & carry case.
Page 13 - Air Tools
Grinding Wheels to suit GP2001A
$45.00 EA
Hooked Wire Disc 0.5 mm gauge PN: GPA2001A-1
Wire Disc 0.55 mm gauge PN: GPA2001A-2
H-Duty Hooked Straight Wire Wheel 0.7 mm gauge PN: GPA2001A-3
Stripping Disc PN: GPA2001A-5 Rubber Disc PN: GPA2001A-4
AIR TOOLS DRILLS 3/8” Reversible Keyed Drill
12 Months Factory Warranty
METAL CUTTING TOOLS
Quality Bi-metal Metal Blades
Air Body Saw
18 TPI of 5 Pack
PT301A18 24 TPI of 5 Pack
PT301A24 32 TPI of 5 Pack
PT301A32 Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg
$185.00
9.5 mm Stroke Length Cuts 1.6 mm mild steel
PN: GP41013
$135.00
PN: GP9301
$25.00 Pkt
Punch and Flange Tool
Air Nibbler
Punches 5 mm diameter hole
(push type)
3/8” Reversible Keyless Drill
Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg
$159.00
$135.00
PN: GP8201
$169.00
Metal Shear Pistol Grip Free Speed: 2500 SPM Cuts 1.6 mm Mild Steel
PN: GP4204
$189.00
GRINDERS
1/4” Right Angle Die Grinder
1/4” Medium Die Grinder
PN: GP2202
$69.00
3/8” Angle Reversible Drill
Free Speed: 1500 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.02 Kg
$185.00
PN: GP9101
PN: GP4201F1
1/2” Reversible Keyed Drill
Free Speed: 800 RPM Chuck Size: 1/2” (12.7 mm) Drilling Capacity: 13 mm (1/2”) Spindle Size: 3/8 x 24 UNF Weight: 1.76 Kg
PN: GP9201
Cuts 1.2-1.6 mm mild steel
Collet Size: 1/4” Free Speed: 18,000 RPM Weight: 0.833 Kg
Collet Size: 1/4” Free Speed: 22,000 RPM Weight: 0.675 Kg
$225
.00
$138.00
1/8” Micro Die Grinder Kit
1/4” Compact Die Grinder Kit PN: GP4209
PN: GP2203R
Free Speed: 55,000 RPM c/w Stones in polymer Case
Free Speed 22,000 RPM c/w Stones in polymer Case
PN: GP2204K
$169.00
AIR ENGRAVER Air Engraving Stylus Includes medium stylus PN: GP2201K
$69.00 PN: GP110
$229.00
3” Cut Off Grinder PN: GP3201
$98.00
Fine Point Stylus to suit GP110
3”Inline Cut-off Grinder Includes one cut-off disc. Free Speed: 18,000 RPM Length: 225 mm
PN: GP110-16 Medium Point Stylus to suit GP110 PN: GP110-17 Wide Point Stylus to suit GP110 PN: GP110-18
67.85 EA
Free Speed: 22,000 RPM Weight: 0.75 Kg
Page 14 - Air Tools
PN: GP3203
$169.00
AIR TOOLS
12 Months Factory Warranty
HYDRAULIC RIVETERS
WRENCHES
3/16” Air / Hydraulic Riveter Gun Kit
1/2” Impact Wrench Kit Max Torque: 260 Ft/lbs Includes 5‑1/4 Inch Extension, Tool Oiler, 9, 10, 11, 13, 14, 17, 19, 22, 24, 27 mm sockets.
Heavy Duty Air/Hydraulic Riveter
PN: GP1121D
$229.00
Sizes: 9/32”, 1/4”, 3/16” & 5/32” PN: GP6304
$599.00
PN: GP504K
$139.00
PN: GP260T
$279
.00
PN: GP3125
$499
.00
1/2” Impact Wrench
3/4” Impact Wrench
Max Torque: 500 Ft/lbs Nett Weight: 2.0 Kg
Max Torque: 1100 Ft/lbs Nett Weight: 3.48 Kg
TYRE INFLATORS
Compact Tyre Gauge
Dual Straight Tyre Water Chuck
• All metal Construction
• Standard 15 mm garden hose fitting • Features internal serrations to grip valve thread • Perfect for water inflation of tractor tyres
Range: 0-160 PSI. Metering: Analog Units: PSI, KPA Inlet: 1/4 Male Output: Schrader valve
NEW!
PN: GPA1570W
$28.00
PN: GPATPG
$30.00
Straight Dual Access Tyre Chuck 3/8” Ratchet Wrench Heavy Duty Max Torque: 75 Ft/lbs PN: GP5203
$138
.00
1/2” Ratchet Wrench Heavy Duty
PN: GPA1570
$23.00
Max Torque: 75 Ft/lbs PN: GP5204
$138
PN: GPATC2
$14.00
PN: GP1558-4
$199.00
Measuring range: 0-160 PSI Units: PSI, KPA Output: Schrader valve PN: GPA6200
$129.00 PN: GP8101
$149.00
GREASE GUN
VACUUM GUN KIT Wonder Gun Kit
4” Heavy Duty
c/w Bag, Hose and Extra Nozzles. Blows and Sucks PN: GP8102
$229
.00
Air and manual grease gun Takes standard 500 CC cannisters
5” Heavy Duty Disc Size: 5” (125 mm) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.82 Kg
Digital Tyre Inflater
Deluxe Tyre Inflater
4” Compact Angle Grinder
Disc Size: 4” (100 mm) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.95 Kg
Tyre Chuck with Flexible Hose
.00
ANGLE GRINDERS Disc Size: 4” (100 mm) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.6 Kg
• Internal serration to grip tread
PN: GP31003
$259
.00
PN: GP1081D
$115.00 Page 15 - Air Tools
PN: GPA0206KB
$69.00
AIR TOOLS
®
12 Months Factory Warranty
Impact Wrenches RUNOUT
1/2” Compact Impact Wrench
PRICE!
Free Speed: 10,000 RPM Max Torque: 200 Ft/lbs Nett Weight: 1.35 Kg
Impact Wrench Free Speed: 6,800 RPM Max Torque: 500 Ft/lbs Nett Weight: 2.80 Kg
$799
Jumbo Single Hammer Free Speed: 8,000 rpm Max Torque: 200 ft/lbs Nett Weight: 1.90 Kg Overall Length: 342 mm
PN: KP1469
$296
.00
PN: KP1475
$389.00
$1,849
.00
FREE ! SOCKET SET Valued at $
339!
Air Hydraulic Nutsert Gun
Heavy Duty Air Hydraulic Riveter
Pulls up to M12 in stainless Rivet Cap: M3, 4, 5, 6, 8, 10, 12 Pulling Power: 4800 lbs Length: 278 mm Nett Weight: 1.8 Kg PN: KP4251MK
Includes 5/16”, 1/4”, 7/32”, 3/16” anvils & tie Rods.
$1,799
.00
6” Extended ble. Anvils Availa
PN: KP1023
$550.00
1” Sq Drive SUPER DUTY Twin Hammer - High Torque Max Torque: 1400 Ft/lbs PN: KP1835 Length: 315 mm Nett Weight: 6.0 Kg
$1,050.00
Takes standard 400, 500, 600, 800 ml (50 mm) sachets. Recommended air pressure: 45-90 PSI Length: 550 mm Weight: 0.9 Kg
$219.00
Heavy Duty Chipping Hammer with Side Exhaust Stroke: 102 mm Blows/Min: 1500 BPM Length: 350 mm Weight: 9 Kg
Pulling Power: 1723 Kg Stroke: 22.5 mm Air Inlet: 1/4” Weight: 1.88 Kg
PN: KP4735S3H
$699.00
CHISELS $655
PN: KP4613
Air Chipping Hammer
Grease Gun
PN: KP4210VK
Manual Grease Gun Capacity: 80 CC
.00 25 mm Flat Chisel to suit KP4735SH for scraping, peeling spot welds etc. Shank Diameter: PN: KPAC10021AH 14.5 mm AF Hex .00 Length: 260 mm
Needle Scaler
$55
HEAVY DUTY NEEDLE SCALER Blows / Min: 3,700 BPM Overall Length: 350 mm 19 Needles Ø3 x 180 mm
1” Super Duty Impact Wrench
Heavy Duty Air Caulking Gun
Purchase a 1” Heavy Duty Impact Wrench and receive a FREE set of 1” Metric or Imperial Sockets Valued at $339!
Free Speed: 3,000 RPM PN: KP1045K Max Torque: 2500 Ft/lbs Nett Weight: 15.8kg
$1,100.00
3/4” Heavy Duty Impact Wrench
1” HD Impact Wrench
See page 19 for metric and imperial socket sets.
PN: KP1838A-P
.00
Free Speed: 6,500 RPM Max Torque: 750 Ft/lbs Nett Weight: 4.55 Kg
NEW!
1” Super Duty Impact Wrench Free Speed: 5,000 RPM Max. Torque: 1,800 Ft/Ibs Weight: 7.10 Kg
PN: KP1030
1/2” Super Duty Angle Impact
Super Compact 1/2” Impact Wrench
6” Extended ble. Anvils Availa
Free Speed: 5,500 rpm Max Torque: 1100 ft/lbs Nett Weight: 5.6 Kg
$299.00
.00
Length: 120 mm Free Speed: 10,000 rpm Max Torque: 450 ft/lbs Nett Weight: 1.55 Kg
3/4” Heavy Duty Impact Wrench
PN: KP1018
PN: KP1012J
$199
1/2” Impact Wrench
PN: KP4722P
$325
.00
25 mm Moil Point Chisel to suit KP4735SH for breaking up concrete. Shank Diameter: PN: KPAC10022AH 14.5 mm AF Hex .00 Length: 260 mm
$55
Page 16 - Air Tools
PN: KPAC050
$29.00
AIR TOOLS
®
1/4” Through Ratchet Kit
12 Months Factory Warranty
Disc Sanders Dual Action Mini Sander
PN: KP2219
$259.00 Complete with 10 Sockets, 3/8” square adapter & blow mound case. Max Torque: 30 ft/lb Nett Weight: 0.6 Kg
Sizes: Metric 8, 10, 12, 13, and 14 mm Imperial 5/16, 3/8, 7/16, 9/16 & 1/2”
Two Speed Drill
Two Speed Air Sander
c/w 50 mm & 75 mm Backing Pad Free Speed: 15,000 rpm Weight: 0.45 Kg
3” Pistol Grip Mini Sander 2 Speed c/w Velcro Pad Weight: 0.50 Kg PN: KP6628
$148.00
Grinders 1/4” Mini Die Grinder
Free Speed: 30,000 RPM Nett Weight: 0.52 Kg
3/8” Super Duty Two Speed Drill
PN: KP6712
$189.00 2 1/2” Super Duty Grinder
PN: KP6226
$169.00
Free Speed: 2,800 rpm Nett Weight: 0.84 Kg
Free Speed: 14,000 RPM Nett Weight: 1.40 Kg
PN: KP6970SL
PN: KP5302
$169
$392.00
.00
Ideal for easy centre punching steel, counter sinking nails or for removing drift pins, roll pins and more. This professional range of spring tools generate 3500 lbs of striking impact and are about the size of a ballpoint pen.
SPRING 5 PIECE AUTOMOTIVE SET 2 PIECE PAINT PRO SET 5 Assorted Punches and Chisel for automotive applications Includes: HSS Centre Punch, Prick and Centre Punch, Self Centering Centre Punch, Cold Chisel Ping Dent Hammer & Carry Case
2 Piece Paint Pro Set painters kit for precise countersinking of nails. Also includes door pin removal tool (also knocks door pins back in).
MADE IN THE U.S.A. MADE IN THE
Rubber Grips to suit spring tools (Spring Tool not included)
PN: ST50X08
$89.00
PN: STGRIPS
$2.00 EA
PN: STPM407
$29.00 Includes: • Hammerless Combination 1/32” and 2/32” Nail Set • Hammerless door pin removal tool
Double Ended Punches
Single Ended Punches SPRING 4 PIECE MEDIUM PUNCH SET 4 Medium Pin Punches for removing drift pins, roll pins, clevis pins, spring pins, dowel pins and more. Includes carry case.
$24
Punch Sizes: Tip Dia.: 1/16”, 3/32”, 1/8” & 5/32” Tip Length: 1 3/8” PN: STPPM503
$78.00
Prick punch .00
EA
High Speed Steel Centre Punch PN: ST28R45-1
Designed to mark Ultra Hard materials. The tip can be sharpened without losing its RC65 Hardness.
5/16” Self Centering Centre Punch PN: ST38R04-1
Creates perfectly centered holes in brackets, hinges and other beveled surfaces. Page 17 - Air Tools
$24.00 EA
PN: ST32R00-1
For slight accurate spot mark for layout and measuring. Centre Punch for deep indentation in most materials.
1/32” & 2/32 Combo Punch
PN: ST32R12-1 For countersinking or setting finish nails.
2/32” Nail Starter and Nail Set Combo. PN: ST32R42-1
Designed to start & guide nails or wire brads into any surface. Ideal for tight spaces where a hammer wouldn’t fit
CLEAN UP TOOLS MAGNETIC BROOM
Magnetic Round Tray
Magnetic Broom. Great for picking up small metal objects from the workshop floor. The broom also has a quick slide release on the telescopic handle.
Air Engine Cleaner (Kero Gun) PN: GPA034
$69.00
150 mm Diameter Rubber Backed to prevent scratching. A great way to keep small parts together while working.
Lifts up to 9 Kg (20 lbs) Width: 377 mm
$119.00
Suction Type c/w Hose
Magnetic Clean up Wand Lifting Capacity: 6.30 Kg Length 400 mm Weight 0.470 Kg
PICK UP WAND PN: GPA1565
$39.00
$16.00
CLEAN UP WAND
PN: MB001
Engine Cleaner
PN: MRT001
Telescopic Magnetic Pick Up Wand Length: 168 mm to 900 mm Capacity: 4.50 Kg
PN: MW001
$75.00
PN: MTP001
$14.00
A one of a kind brush system Unlike other sweeping brush devices, Haaga sweepers rely on there patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. The coarse or fine debris is not run over or pushed around in front of the sweeper.
Ideal cleaning solution for workshops, warehouses, factories and parking areas. Effortlessly sweep up fine and coarse dirt, from sand to cans, wet leaves, be it dry or wet. The disc brushes, which protrude on both sides ensure even greater sweeping performance Easy operation & long service, life thanks to it’s belt-less drive system.
Additional guide rollers for easy sweeping along curbs and walls. The infinitely variable height adjustment ensures optimal performance on various types of surfaces. Space-saving storage, store vertically without losing any of the collected material.
HAAGA 200 Series Sweepers One of a kind brush system Unlike other sweeping brush devices the Haaga 225 sweeper relies on it’s patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. Coarse or fine debris are not run over or pushed around in front of the sweeper.
1 YEAR COMMERCIAL
WARRANTY
200 Series Commercial Sweeper Cleaning Width: 550 mm Performance: 1600 m2/h Capacity: 25 Liters Weight: 6 Kg (empty) PN: HG255
$449.00 400 Series Commercial Sweeper Cleaning Width: 770 mm Performance: 2,900 m2/h Capacity: 50 Liters Weight: 13 Kg (empty) PN: HG477
$899.00
HAAGA 400 Series Sweepers
Features an automatic height adjustment
Twice the sweeping capability in one pass
400 Series Commercial Sweeper Cleaning Width: 970 mm Performance: 3,600 m2/h Capacity: 50 Liters Weight: 15 Kg (empty)
The Haaga 477 & 497 models have an additional fine particle roller brush that is mounted behind the circular brushes.
Very low dust through intelligent air flow Both machines are also equipped with two special fine particle filters. The dusty air is cleaned by these filters and returned to the sweeping circuit.
PN: HG497
$1090.00 Page 18 - Clean Up Tools
2 YEAR DOMESTIC WARRANTY
AIR ACCESSORIES SOCKET SETS
Made from Chrome Molybdenum Steel CR-MO.
3/8” DRIVE
Meet or exceed DIN & ANSI standards.
1/2” DRIVE
3/8” 8 Piece Metric Socket Set Sizes: 8, 10, 11, 12, 13, 15, 17, 19 mm 3/8” 8 Piece Imperial Socket Set Sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”
PN: GX838SSM
$59
.00
PN: GX838SSI
$59
.00
1/2” 13 Piece Metric Socket Set Sizes: 10, 12, 13, 14, 15, 17, 18, 19, 21, 22, 24, 27 and 30 mm 1/2” 13 Piece Imperial Socket Set Sizes 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,15/16, 1, 1-1/16, 1-1/8, 1-1/4”
3/4” DRIVE
PN: GX1312SSM
$129
.00
PN: GX1312SSI
$129
.00
3/4” 8 Piece Imperial Socket Set Sizes 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 and 1-1/2”
PN: GX834SSM
$159.00 PN: GX834SSI
$159.00
SPIN EXTENSIONS
1/2” DRIVE HEX BIT SET
1” DRIVE
3/4” 8 Piece Metric Socket Set Sizes: 26, 27, 29, 30, 32, 35, 36 and 38 mm
The ergonomic roller-bearing grab handle protects your hand from friction burns, burs and”glove grab”. It’s use also helps to balance heavy impact tools. The aluminum alloy handle is permanently mounted on the CrMo extension.
Made from SNCM 8660 Steel which allows 20% more torque than CR-MO. 1” 9 Piece Metric Socket Set Sizes 24, 27 ,30, 32, 33, 36, 38, 41 and 46 mm 1” 9 Piece Imperial Socket Set Sizes 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8 and 2”
PN: GX91SSM
1/2” 8 Piece Imperial Hex Bit PN: GX12HBSM Socket Length 60 mm .00 Sizes: H5, H6, H8, H10, H12, H14, H17, H19 mm
PN: GX91SSI
1/2” 8 Piece Imperial Hex Bit Socket Length 78 mm Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”
$339.00 $339
.00
$69
IMPACT UNIV. JOINTS
PN: GX12HBSI
$69.00
PN: GX38U
1/2” Drive Universal Joint Overall Length 63 mm
PN: GX12U
1/4” Wobble Extension Bar Set 4 Piece
3/4” Drive Universal Joint Overall Length 90 mm
PN: GX34U
$19.00 $22.00
Includes: 3”, 6”, 10” & 12” bars
$23.00 5 Piece Std Adapter Set Chrome Vanadium
5 Piece IMPACT Adapter Set Chrome Molybdenum
1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male
1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male
PN: GXWEBS14
PN: GXWEBS38
$49.00
PN: GXIA5
$35.00
Made from Chrome Molybdenum Steel CR-MO.
3/8” Wobble Extension Bar Set 4 Piece
Includes: 3”, 6”, 10” & 18” bars
PN: GX5AS
$69.00
$43.00
$39.00
5 PIECE ADAPTER SETS
$39.00 PN: GX34SE
3/4” Spin Extension Length 10”
WOBBLE IMPACTING BAR SETS
3/8” Drive Universal Joint Overall Length 50 mm
Molybdenum Steel CR-MO.
PN: GX12SE 1/2” Spin Extension Length 8”
1/2” Wobble Extension Bar Set 4 Piece
Includes: 3”, 5”, 10” & 18” bars PN: GXWEBS12
$59.00 Page 19 - Clean Up Tools
AIR ACCESSORIES INLINE WATER SEPARATOR 1/4” Inline Water Separator is an ideal solution for maintaining quality control when painting 2-Pack or oil based paints.
3/8” Air Hose Reel
Manual Hose Reel
• Brass swivel points • Polyurethane braided hose • Sheet metal housing • Wall Mountable Hose Size: 12 Metre x 11 mm ID
• High quality Polyurethane braided hose • Space Saving Foldable Handle • 360 degree swivel base Includes wall hanging bracket. Hose Size: 20 Metre x 11 mm ID
PN: GPA1512
$24.00
IN-LINE REGULATORS 1/4” Male to 1/4” Female
1/4” Internal Thread
PN: GPHR1012
$269.00 1/4” NPT Male to 1/4” NPT Female
$269.00
Japanese PN: GPA1012 Compatible .00 Coupling
PN: GPA1010
$14
PN: GPHR1220
$14
.00
1/4” External Thread.
Swivel Connector
FILTER REGULATORS FILTER REGULATOR & LUBRICATOR
Japanese Compatible Coupling
1/4” NPT Male to 1/4” NPT Female
PN: GPA1011
$14.00
PN: GPA9100A
$22.00
ROTARY COUPLINGS Range: 22 ° PN: B05
3/8” Male Rotary Coupling PN: B07
$14
.00
PART NUMBER
PRICE
1/4” mini control unit
THBC202
$59.00
1/4” control unit
THBFLR802
$85.00
3/8” control unit
THBFLR803
$85.00
1/2” control unit
THBFLR804
$85.00
FILTER REGULATOR
1/4” Male Rotary Coupling
Range: 22 °
DESCRIPTION
DESCRIPTION
PART NUMBER
PRICE
1/4” mini filter reg
THBFR212
$59.00
1/4” filter regulator
THBFR802
$55.00
3/8” filter regulator
THBFR803
$55.00
1/2” filter regulator
THBFR804
$55.00
EA 3/4” Filter Regulator
1/4” Regulator
Premium Compressor Oil 1 Litre
Integrated Auto Drain
c/w gauge (No Filter)
Protect your compressor and extend service life with Geiger Premium Compressor Oil.
1” Filter Regulator
PN: COMPOIL1
$19.00
PN: THBFR926A
$229
.00
Integrated Auto Drain PN: THBFR928A
$229
.00
PN: THBR202
$39.00
1/2” Filter (No Regulator or Gauge) PN: THBF804
$45.00
Spare parts are available for all Geiger filter regulators.
Page 20 - Clean Up Tools
AIR ACCESSORIES MANIFOLDS
AIR BLOW GUN & DUSTERS 3/8” High Flow Blow Gun Kit (All Metal) Japanese compatible fitting. Kit includes: • High Flow Duster • Easily Adjustable High Flow Nozzle. • Heavy Duty High Flow Nozzle • Standard Nozzle.
2 Way In-line Quick Coupler PN: GPA1515
PN: GHF60AS
$46
$24
.00
.00
Pocket Blow Gun Air blower gun
PN: GPA1517
2 Way Cluster Manifold Bare
3 Way Cluster Manifold Bare
$28
$32.00
.00
PN: GPAYA3
PN: GPAYA2
$11
$12.00
.00
2 Way Cluster Quick Coupler
PN: GPB90K
.00
4 Way In-line Quick Coupler
PN: GPA1516
Roll Throttle (on - off) Nitto Compatible Length: 114 mm
Features integrated 2 metre air hose.
$49
3 Way In-line Quick Coupler
PN: GPA1513
$24
.00
3 Way Cluster Quick Coupler PN: GPA1514
$28.00
PN: PBG-N
4 Way Inline Manifold Bare PN: GPATA4
$13.00 3 Way Inline Manifold Bare PN: GPATA3
$12.00 2 Way In-line Manifold Bare PN: GPATA2
$11.00
$13.00
10 mm RECOIL HOSE 2 Metre Recoil Hose PN: GPH1003LBHL
$45
.00
5 Metre Recoil Hose 6.5 mm ID/10 mm OD c/w Japanese compatible One Touch couplings.
PN: GPH1006LBHL
$49
.00
10 mm FITTED AIR HOSE
12 mm RECOIL HOSE 5 Metre Recoil Hose
6 Metre Recoil Hose
PN: GPH1206LBHL
PN: GPH1008LBHL
$55
6 Metre Recoil Hose
8 Metre Recoil Hose
$59
.00
8 mm ID/12 mm OD c/w Japanese compatible One Touch couplings.
$59
$79.00
.00
12 mm One Touch Coupling Fittings for Air Hose
Includes 2 x hose clamps
Includes 2 x hose clamps
30 Metre Fitted Air Hose
Air Hose Size: 10 mm ID c/w Japanese compatible One Touch couplings.
Air Hose Size: 10 mm ID c/w Japanese compatible One Touch couplings.
Air Hose Size: 12 mm ID c/w Japanese compatible One Touch couplings.
Air Hose Size: 12 mm ID c/w Japanese compatible One Touch couplings.
$69.00
PN: GPH1212LBHL
PN: GPH1208LBHL
10 mm One Touch Coupling Fittings for Air Hose
20 Metre Fitted Air Hose
$49.00
10 Metre Recoil Hose
AIR HOSE CONNECTION KIT
30 Metre Fitted Air Hose
PN: AH1030F
$69.00
12 mm FITTED AIR HOSE
20 Metre Fitted Air Hose
PN: AH1020F
PN: GPH1210LBHL
$55.00
.00
PN: GPH1010LBHL
8 Metre Recoil Hose
PN: AH1220F
$79
.00
PN: AH1230F
$105
.00
Page 21 - Clean Up Tools
PN: AHPACK
$22
.00
PN: AHPACK12
$27.00
Standard & Special Carbide Burrs Made in Europe.
For over 50 years Morrisflex has provided optimum solutions for aerospace, automotive, shipbuilding, metal fabrication & welding sectors worldwide. Morrisflex has been committed to providing our customers with high performance products that maximise productivity and reduce costs. Morris Flex is accredited to ISO9001: 2008 and is equipped with the latest CNC technology delivering product of unrivaled quality and consistency.
Standard 1/4” Shank Carbide Burrs Standard & Non-ferrous 1/4” Shank Carbide Burrs are available in three head diameters.
1/4” 3/8” 1/2”
Ball Shape
Size 1 Size 3 Size 5
H ea d Si z e
He ad D ia
He ad Length
Ov e r all Length
1 3 5
1/4”
3/8”
3/8” 1/2”
PN
Price
2”
CBSE1
5/8”
2 3/8”
CBSE3
7/8”
2 5/8”
CBSE5
$30.00 $39.00 $55.00
1 3 5
He ad Length
Ov e r all Length
PN
Price
$30 $29.00 $55.00
1/4”
11/16”
2”
CBSF1
3/8”
3/4”
2 1/2”
CBSF3
1/2”
1”
2 3/4”
CBSF5
.00
H ea d Si z e
Head D ia
Head Length
Ov e r all L ength
1 3 5
1/4”
11/16”
3/8” 1/2”
PN
Price
2”
CBSG1
3/4”
2 1/2”
CBSG3
1”
2 3/4”
CBSG5
$30.00 $46.00 $55.00
H ea d Si z e
He ad D ia
He ad Length
Ov e r all Length
1 3 5
1/4”
11/16”
3/8” 1/2”
PN
Price
2”
CBSA1
3/4”
2 1/2”
CBSA3
1”
2 3/4”
CBSA5
$30.00 $39.00 $55.00
Cylinder Shape with End Cut H ea d Si z e
He ad D ia
He ad Length
Ov e r all Length
1 3 5
1/4”
11/16”
3/8” 1/2”
PN
Price
2”
CBSB1
3/4”
2 1/2”
CBSB3
1”
2 3/4”
CBSB5
$30.00 $39.00 $55.00
Radius Ended Cylinder Shape
1 3 5
Head Length
1 3 5
1/4”
3/16”
3/8” 1/2”
PN
Price
2”
CBSD1
5/16”
2 1/8”
CBSD3
7/16”
2 1/4”
CBSD5
$30.00 $39.00 $55.00
Head Size
Head Di a
Head Len g th
Ov er al l Len g th
PN
Price
1 3 5
1/4”
9/16”
2 3/4”
CBSH1
3/8”
3/4”
2 1/2”
CBSH3
1/2”
1 1/4”
3”
CBSH5
$30.00 $49.00 $72.00
Head Size
Head Di a
Head Len g th
Ov er al l Len g th
1 3 5
1/4”
11/16”
3/8” 1/2”
PN
Price
2”
CBSL1
1 3/16”
3”
CBSL3
1 1/4”
3”
CBSL4
$30.00 $46.00 $55.00
Head Size
Head Di a
Head Len g th
Ov er al l Len g th
PN
Price
1 3 5
1/4”
1/2”
1 7/8”
CBSM1
3/8”
5/8”
2 1/2”
CBSM4
1/2”
7/8”
2 3/4”
CBSM5
$30.00 $55.00 $55.00
Inverted Cone Shape
Cylinder Shape
Head D ia
Ov er al l Len g th
Cone Shape
Pointed Tree Shape
H ea d Si z e
Head Len g th
Ball Nosed Cone Shape
Ball Nosed Tree Shape He ad D ia
Head Di a
Flame Shape
Oval Shape
H ea d Si z e
Head Size
Ov e r all L ength
PN
Price
$30 $39.00 $55.00
1/4”
11/16”
2”
CBSC1
3/8”
3/4”
2 1/2”
CBSC3
1/2”
1”
2 3/4”
CBSC5
.00
Page 22 - Air Tool Accessories
Head Size
Head Di a
Head Len g th
Ov er al l Len g th
1 3 5
1/4”
5/16”
3/8” 1/2”
PN
Price
2”
CBSN1
3/8”
2 1/8”
CBSN3
1/2”
2 1/4”
CBSN5
$30.00 $46.00 $55.00
60° Countersink Shape Head Size
Head Di a
Head Len g th
Ov er al l Len g th
1 3 5
1/4”
3/16”
3/8” 1/2”
PN
Price
2”
CBSJ1
5/16”
2 1/4”
CBSJ3
7/16”
2 3/8”
CBSJ5
$30.00 $39.00 $55.00
90° Countersink Shape Head Size
Head Di a
Head Len g th
Ov er al l Len g th
1 3 5
1/4”
1/8”
3/8” 1/2”
PN
Price
2”
CBSK1
3/16”
2 1/8”
CBSK3
1/4”
2 1/8”
CBSK5
$30.00 $39.00 $55.00
NEW!
Carbide Burr Sets 1/8” Head Carbide Burr 10 Piece Set
3/8” Head Carbide Burr 3 Piece Set
1/4” & 3/8” Head Burr 8 Piece Set
1/2” Head Carbide Burr 5 Piece Set
3/8” Head Non‑ferrous Burr 3 Piece Set
3/8” Head Stainless Burr 3 Piece Set
Shank Dia: 1/8”
Shank Dia: 1/4”
Shank Dia: 1/4”
Shank Dia: 1/4”
Shank Dia: 1/4”
Shank Dia: 1/4”
PN: CBSET3
PN: CBSET10
$139
PN: CBSET8
$110.00
.00
$229.00
PN: CBSET5
PN: CBSET3NF
$255.00
PN: CBSET3INOX
$135.00
$129.00
Non-ferrous 1/4” Shank Carbide Burrs NF Cylinder Shape H ea d Si z e
Head D ia
Head Length
Ov e r all L ength
1 3 5
1/4”
11/16”
3/8” 1/2”
NF Radius Ended Cylinder Shape PN
Price
2”
CBSA1NF
3/4”
2 1/2”
CBSA3NF
1”
2 3/4”
CBSA5NF
$46.00 $46.00 $72.00
NF Pointed Tree Shape H ea d Si z e
1 3 5
Head D ia
Head Length
Ov e r all L ength
PN
Price
$46 $55.00 $72.00
1/4”
11/16”
2”
CBSG1NF
3/8”
3/4”
2 1/2”
CBSG3NF
1/2”
1”
2 3/4”
CBSG5NF
.00
Head D ia
Head Length
Ov e r all L ength
PN
Price
3
3/8”
5/8”
2 1/2”
CBSM4NF
$72
.00
1 3 5
Ov er al l Len g th
1 3 5
1/4”
11/16”
3/8” 1/2”
PN
Price
2”
CBSC1NF
3/4”
2 1/2”
CBSC3NF
1”
2 3/4”
CBSC5NF
$46.00 $45.00 $72.00
Head Size
Head Di a
Head Len g th
Ov er al l Len g th
1 3 5
1/4”
11/16”
3/8” 1/2”
PN
Price
2”
CBSF1NF
3/4”
2 1/2”
CBSF3NF
1”
2 3/4”
CBSF5NF
$46.00 $55.00 $72.00
Head Size
Head Di a
Head Len g th
Ov er al l Len g th
1
1/4”
11/16”
3 5
3/8” 1/2”
PN
Price
2”
CBSL1NF
1 3/16”
2 1/2”
CBSL3NF
1 1/4”
2 1/2”
CBSL4NF
$46.00 $55.00 $72.00
NF Oval Shape
NF Ball Shape Head Length
Head Len g th
NF Ball Nosed Cone Shape
H ea d Si z e
Head D ia
Head Di a
NF Ball Nosed Tree Shape
NF Cone Shape
H ea d Si z e
Head Size
Ov e r all L ength
PN
Price
$46 $75.00 $72.00
1/4”
5/16”
2”
CBSD1NF
3/8”
5/16”
2 1/8”
CBSD3NF
1/2”
7/16”
2 1/4”
CBSD5NF
.00
Head Size
Head Di a
Head Len g th
Ov er al l Len g th
1 3 5
1/4”
3/8”
3/8” 1/2”
PN
Price
2”
CBSE1NF
5/8”
2 3/8”
CBSE3NF
7/8”
2 5/8”
CBSE5NF
$46.00 $55.00 $72.00
1/4” Extended Shank Burrs Cylinder Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6 3/4” A PN: CBSA3L6
$59.00
Ball Nosed Tree Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6 3/4” F PN: CBSF3L6
$59.00
Cylinder Shape with End Cut Head Dia: 3/8” Head Length: 3/4” Overall Length: 6” B PN: CBSB3L6
$59.00
Pointed Tree Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6 3/4” G PN: CBSG3L6
$59.00
Radius Ended Cylinder Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6” C PN: CBSC3L6
$59.00
Ball Shape Head Dia: 3/8” Head Length: 1/3” Overall Length: 6” D PN: CBSD3L6
$59.00
Ball Nosed Cone Shape Head Dia: 3/8” Head Length: 1 1/5” Overall Length: 6” L PN: CBSL3L6
$59.00 Page 23 - Air Tool Accessories
Oval Shape Head Dia: 3/8” Head Length: 5/8” Overall Length: 6 5/8”
A B
E PN: CBSE3L6
$59.00
C F
D
G L
E
SERIOUS STORAGE SYSTEMS HB Storage Bin Hanging Panels Hanging Panels (set of 2) C/W screws & wall plugs 605W mm x 455H mm x 8D mm
HB Mobile Storage Cart Now you can make your HB bins mobile with this hanging display unit. With caster wheels (2 with brakes). This is an excellent time and space saver for any workshop. Take only what you need to the job, while keep items oganised. HB Bins are easily detached from the to cart.
PN: HP1
$59.00
Model - MS20020K
$799.00
Hanging Panel Kit
MOBILE STORAGE CART
Set of Hanging Panels, 40 x HB210 Bins C/W Screws and wall plugs. PN: HP1KITB HP1KITR
Heavy Duty Display Kit Galvanised Steel Overall Size: 740W mm x 560D mm x 1460H mm
$169.00 EA
C/W: 72 x HB220B 32 x HB230B
/ HB220R / HB230R
HB Series Heavy Duty Multi-Function Storage Bins
New HB Series Heavy Duty Storage Bins are a versatile solution that adapts to your changing storage requirements. HB bins can be used as free standing bench storage, wall mounted storage units or on a mobile storage cart. The new design can take very high load when stacked (100 plus kilograms). Each HB bin comes with 4 Legs included.
HB Small Short Bin
HB Medium Bin
HB Large Short Bin
105W mm x 137D mm x 76H mm
140W mm x 276D mm x 127H mm
210W mm x 273D mm x 178H mm
PN: HB210B PN: HB210R
The 60 drawer NHD560 takes up to 600 Kg total weight and up to 100 Kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant. The window front makes it easy to identify the contents.
Model - NHD560
PN: HB230B PN: HB230R
PN: HB239B PN: HB239R
$14.00 ea
HB Medium Duplex Bin
HB Large Duplex Bin
105W mm x 187D mm x 76H mm
C/W C’Board 279W mm x 276D mm x 127H mm
C/W C’Board 420W mm x 375D mm x 178H mm
$4.35 EA
PN: HB235B PN: HB235R
$13.00 ea
PN: HB250B PN: HB250R
$23.00 ea
HD Steel Parts Cabinets HD cabinets take up to 100 kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant. The front face of each drawer features a window which makes it easy to identify the contents.
Model - HD530
$599.00
Model - HD318
$499.00
Model - HD515
$455.00
HD 30 Drawer Steel Parts Cabinet 880W mm x 400D mm x 880H mm Drawer size: 160W mm x 110H mm x 410D mm
$1295.00
HD 18 Drawer Steel Parts Cabinet 550W x 400D x 880H mm Drawer Size: 160W mm x 110H mm x 410D mm
HD 60 Drawer Steel Parts Cabinet 880W x 400D x 1725H mm HD Drawer size:
$9.00 ea
HB Small Bin PN: HB220B PN: HB220R
HD Steel Parts Cabinets
$3.95 EA
160 MM 110 MM
HD 15 Drawer Steel Parts Cabinet 880W x 400D x 440H mm Drawer size: 160W mm x 110H mm x 410D mm
410 MM
Page 24 - Air Tool Accessories
Lockable Cabinets Perfect for the showroom or where lockable storage is required. Create more display areas in the showroom by adding a Glass Door Display Cabinet or a Steel Door Storage Cabinet. Both cabinets feature key & combination pin lock, sliding doors for easy access in confined spaces and 2 adjustable shelves. Stack both cabinets together to raise the display cabinet to eye level.
Model - THD2S
$799.00
Heavy Duty Steel Lockable 3 Shelf Cabinet. 880W mm x 400D mm x 880H mm
Model - DU118M
$599.00
Lockable Steel Door Storage Cabinet 1180W mm x 400D mm x 880H mm
Contents of cabinet not included.
Model - DU118G
$599.00
Lockable Glass Door Display Cabinet 1180W mm x 400D mm x 880H mm
Heavy Duty Parts Cabinets
A great range of professional parts cabinets for the workshop. The all metal frame is constructed from 0.8 mm galvanized steel. The moulded drawers are acid and oil resistant. All drawers come with 1 removable divider.
A5 Model - A5336
$499
Model - A5324
$389.00
.00
36 Drawer A5 Parts Cabinet 586W mm x 290D mm x 937H mm 24 Drawer A5 Parts Cabinet 586W mm x 290D mm x 640H mm
A6 Model - A6330H
$459
Model - A6212H
$279.00
.00
30 Drawer A6 Parts Cabinet 533W mm x 265D mm x 937H mm 12 Drawer A6 Parts Cabinet 362W x mm 265D mm x 571H mm
HEAVY DUTY PARTS CABINETS Model - A7448D
A7 Lockable 48 Drawer Parts Cabinet 586W mm x 270D mm x 970H mm
699.00
Model - A7324D
A7 Lockable 24 Drawer Parts Cabinet 444W mm x 270D mm x 677H mm
525.00
A8
Model - A8560
Mobile Parts Cabinets $499.00
60 Drawer A8 Parts Cabinet 586W mm x 222D mm x 937H mm
Model - A8432
$349.00
32 Drawer A8 Parts Cabinet 466W mm x 222D mm x 642H mm
ST2
Model - ST2460
$499.00
60 Drawer ST2 Parts Cabinet 586W mm x 222D mm x 937H mm Drawer Size: 120W mm x 210D mm x 55H mm
Model - NHD530
$869.00
30 Drawer Parts Cabinet 980W mm x 400D mm x 1010H mm (Including handle and caster wheels)
Page 25 - Air Tool Accessories
A7 Model - A7448
$499.00
Model - A7324
$310.00
48 Drawer A7 Parts Cabinet 586W mm x 222D mm x 937H mm 24 Drawer A7 Parts Cabinet 444W mm x 222D mm x 642H mm
LE
LOCKAB
DOORS
Hand Tools HAND TOOLS
SCREWDRIVER SETS
Metric 9 Piece Ball Point Hex Key Wrench Set
42 Piece Precision Screwdriver Set Set Includes: Handle (20 teeth) & Flexible Extension
Sizes: 1.5, 2, 2.5, 3, 4, 5, 6,8 & 10 mm PN: GXHK9M
PN: GSDS
$38.00
$49.00
10 BIT ANGLE DRIVER SET PN: GPA1600
$29.00
$45.00
Imperial (SAE) 13 Piece Ball Point Hex Key Wrench Set
Non Tamperproof 13 Piece Star Key Wrench Set
Sizes: 0.05”,1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, & 3/8”
Sizes: T6H, T7H, T8H,T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H PN: GXTX13
$38.00
4 Piece Hook & Pick Set 61/4” Includes 1 x straight, 1 x 90°, 1 x Offset & 1 x Hook
PN: GXHK19M
Set includes: Flat Head, Hex Head, Phillips Head, Star Head, Small Socket Set 5 mm to 11 mm, Magnetic Drive Unit and 5 x combination bits.
Set includes: 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14, 17, 19 mm Keys
Jumbo Imperial 13 Piece Ball Point Hex Key Set PN: GXHK34I
PN: GBS49
.00
Set includes: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4" Keys
PN: GXHP4
$99.00 EA
$29.00 3 Piece T-Handle Set 1/4”, 3/8” and 1/2” Drive Chrome Vanadium
PN: GBS21
$12.00
14 Piece Gasket Punch Set
Includes: Phillips head (2 x #0, 1, 2) Hex Head (2 x #3,4,5) Flat head (1 x #5, 2) and Star head (2 x #0, 1, 2)
SOCKET SETS
$45.00
Jumbo Metric 13 Piece Ball Point Hex Key Set
49 Piece Bit Set.
21 Piece Magnetic Drive Guide Set
Sizes: T6H, T7H, T8H, T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H PN: GXTP13
PN: GXHK13I
$19
Tamperproof 13 Piece Star Key Wrench Set
Sizes 1/4, 5/16, 3/8, 7/16 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 3/8, 1 1/2”
PN: GGPS
$65.00 PN: GXTH3
$129.00
Made from Chrome Vanadium Steel
1/4”43 Piece Chrome Vanadium Socket Set
1/2” 56 Piece Chrome Vanadium Socket Set
• 1/4” Drive Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 & 14 mm • 1/4” Ratchet Handle 72 Gears • 1/4” Extension Bars 2” & 6” • 1/4” Spinner Handle • 1/4” Universal Joint • 3 Way Adapter • 1/4” Flexible Extension Bar • 1/4” Bit Socket (23 Pieces Torx T8, T9, T10, T15, T20, T25, T27, T30, T40 PH 1, 2, 3 Slotted 4, 5.5, 6.5 Pozi 1, 2, 3 Hex H3, H4, H5, H6, H8 • Blow Mold Case
• 1/2” Drive Sockets sizes: 8, 10, 11, 12, 13,14, 15, 17, 18, 19, 22, 24, 27, 30, 32 mm • 1/2” Ratchet Handle 72 Gears • 1/2” Extension Bars 5” & 10” • 1/2” Park Plug Socket 16 & 21 mm • 1/2” 3 Way Adapter • 1/2” Coupler x 10 mm Hex • 1/2” Bit Sockets 3 Piece T50, T55, T60 • 1/2” Bit Sockets: 31 Piece Torx bits: T10, T15, T20, T25, T27, T30 PH 1, 2, 3, 4, Slotted 6.5, 8, 10, 12 Pozi 1, 2, 3, 4 Hex 4, 5, 6, 8, 10 TP T10, T15, T20, T25, T27, T30, T40, T45 • Blow Mold Case
PN: GP1599-5
$69.00
Page 26 - Hand Tools
PN: GP1599-8
$119.00
Lang Tools represents hand tools that professional technicians and handymen have used for over 80 years, which assures that you are dealing with performance proven consumer preferred, professional high quality products.
12 PIECE COMBINATION INTERNAL / EXTERNAL SNAP RING PLIERS SET
Slim profile tips for tight applications.
CONVERTIBLE RETAINING RING PLIERS
SET OF 2 SWITCHABLE RETAINING RING PLIERS
• Convert between internal and external with a quick flip of a switch • Eliminates the jaw aligning push-pin process • Double-dipped custom grip made of low-temp, high‑impact material
• Spring return handles • Each pliers includes a tip kit containing durable alloy, colour‑coded interchangeable tips and hex key, all stored in a handy pouch
PN: L75
PN: L1450
$119.00
PN: L3495
$249.00
$135.00
Quick Switch Ratchet Pliers with Automatic Lock and Tip Kit. Automatic ratchet lock feature keeps rings open or closed for easy installation and removal.
2 Piece Quick Switch Pliers with Automatic Lock and Tip Kits. Contains 1ea of L1421 and L1434 models c/w 5 prs of colour coded interchangeable tips and hex key for each.
Ring Size Range
Ring Size Range
Metric
Imperial
• Pliers are convertible for use on internal and external snap rings with cushioned grip handles
Internal
46 mm – 102 mm
1-13/16˝ – 4˝
External
32 mm – 102 mm
1-1/2˝ – 4˝
• Pliers have a knurled centre screw with spring for easy changing and secure hold
Tip Sizes
• Sets are packaged in a plastic blow molded case for protection and easy use
MADE IN THE
U.S.A.
Metric
SAE(Inch)
Bent 15°
2.3 mm, 2.7 mm, 3.0 mm
0.090˝, 0.108˝, 0.120˝
Bent 70°
2.3 mm, 2.7 mm, 3.0 mm
0.090˝, 0.108˝, 0.120˝
Metric
Imperial
Internal
7 mm – 26 mm (L1421) 10 mm – 51 mm (L1434)
1/4” – 1” 3/8” – 2”
External
3 mm: 26 mm (L1421) 7 mm – 51 mm (L1434)
1/8” – 1” 1/4˝ – 2˝
Tip Sizes L1421 Metric
SAE(Inch)
L1421
Retaining Ring Pliers
Straight
0.6 mm, 1.0 mm, 1.2 mm
0.023˝, 0.039˝, 0.047˝
Spring ratchet locking mechanism securely holds against snap ring tension
Bent 90°
1.0 mm, 1.2 mm
0.039˝, 0.047˝
Internal Retaining External Retaining Ring Pliers Ring Pliers
Straight
1.0 mm 1.2 mm, 1.9 mm
0.039˝, 0.047˝, 0.074˝
Bent 90°
1.0 mm, 1.2 mm
0.039˝, 0.047˝
PN: L1485
PN: L1486
Ring Sizes: 78 mm to 159 mm (3-1/16” to 6-1/4”) Tip size: Straight 3 mm (.120”)
Ring Sizes: 89 mm to 165 mm (3-1/2” to 6-1/2”) Tip size: Straight 3 mm (.120”)
L1434
$139.00 EA
Spare Tips to Suit Ext. & Int. Ring Pliers Spare tips available to suit (L1486) External and Internal (L1485) Ring Pliers:
Straight Tips to suit L1485/6 PN: L88600
PN: L279
$129.00
$35.00 EA
45 Degree Tips to suit L1485/6
90 Degree Tips to suit L1485/6
PN: L88645
Brake Calliper Ratchet Press
PN: L88690
Features:
TIP SETS Strong and durable alloy steel tips. Includes 6 pairs of colour-coded, interchangeable tips, set screws and Hex.
TIP SET to suit L1421Pliers PN: L12
$35
.00
TIP SET to suit L1434 Pliers PN: L14
$35
.00
Page 27 - Hand Tools
TIP SET to suit L75 Pliers PN: L651590
$39
.00
• Four Tools in One • Works on various single, dual & quad piston callipers • Centrally distributes force Working range: 40 mm - 64 mm Length: 235 mm
• Compact design • 360 degrees ratchet swing allows access at any angle
One Year FA C T O R Y
WARRANTY
ools t s & s r e p
cree
Made in the
THE BONE
The Bone™ and Bonester™ feature a uniquely shaped body which cradles the user between the wheels only an inch or so above the ground. The big, easy rolling wheels are positioned outboard to provide a strong, stable working platform that can’t tip or flip the user. The large diameter wheels roll easily over all sorts of obstacles such as cords and air lines.
EASY RIDER
LOW PROFILE Mechanics Creeper
ROUGH RIDER
U.S.A. 140 KG CAPACITY
1194L x 648W x 160H MM Wheels: Ø130 MM x 25 MM width Load Capacity: 180 Kg Wide Easy Rider Tyres 45 MM Ground Clearance Weight: 8 Kg
PN: BONE6031
$349.00
160 MM PROFILE
ROUGH RIDER Mechanics Creeper The Easy Rider Wheels have soft tyres that grab and roll over frustrating shop clutter.
1194L x 648W x 191H MM Wheels: Ø130 MM x 33 MM width Rough Rider Rider Tyres 73 MM Ground Clearance Weight: 9.1 Kg
The Rough Rider Wheels are designed for use on grass, gravel and dirt or anywhere the going is tough
191 MM PROFILE
SUPER LOW PROFILE The deep, smoothly molded structural ribs add incredible strength and durability without adding bulk & weight; providing welcome ventilation for those hot muggy days. Two inlayed hand-holds make it easy to carry and easy to secure against theft or serial tool borrowers.
Mechanics Creeper
180 KG
1092L x 594W x 114H MM Wheels: Ø75 MM x 22 MM width Load Capacity: 180 Kg Easy Rider Tyres 38 MM Ground Clearance Weight: 6 Kg
CAPACITY
PN: BONE4031
$239.00
THE TAIL BONE The Tail Bone is a totally new approach to creeper seats, easier to use, more comfortable and rolls effortlessly over air hoses, drop cords, shop clutter and rough surfaces. The uniquely designed tripod base is a naturally stable working platform even on uneven floors and surfaces. The super comfortable bucket seat is shaped and sized for real-world people.
Mechanics Stool Ribbed Body
Rough Rider Mechanics Stool Ribbed Body
740L x 800W MM 300 MM Seat Height Load Capacity: 160 Kg Huge 130 MM Easy Rider Tyres 20 MM Ground Clearance Weight: 7 Kg
740L x 800W MM 330 MM Seat Height Load Capacity: 180 Kg Huge 130 MM Ø Rough Rider Tyres 44 MM Ground Clearance Weight: 7.5 Kg
160 KG CAPACITY
PN: BONE5031
$299.00
CAPACITY
PN: BONE7031
$399.00
THE BONESTER
114 MM PROFILE
180 KG
180 KG CAPACITY
PN: BONE5131
$369.00 Page 28 - Hand Tools
HIGH PERFORMANCE DEBURRING TOOLS
24 Piece Deburring Set
Ergonomic Deburring Tool & Blade Set
Set of Multi-Component and Quick Release Handles including a comprehensive range of accessories.
Promotional Quick Release Handle Set with 10 assorted 3.2 mm blades. Set Includes: 3.2 mm Standard Quick Release Handle (GDSDSDMK) Standard 3.2 mm Deburring blades: 2 x GDSC10, 2 x GDSC101, 2 x GDSC15, 2 x GDSC20, 1 x GDSC30, 1 x GDSC35
PN: GD88030
$220.00
PN: GD88040
$34.00 Set includes:
3 Multi-Component Handles (GDSTSDMK) Heavy Duty 6 mm Quick Release Handle (GDSRSDMK), Micro Deburring blades: GDSP1, GDSP2, GDSP3
Standard Deburring blades: GDSC10, GDSC101, GDSC15 GDSC20, GDSC30, GDSC35
Heavy Duty Deburring blades: GDSR10S, GDSR15S
Telescopic Blade Holders GDSDTP, GDSDTC, GDSVT, GDSCSLONG, GDSKW
Deburring Blades & Scrapers GDSV4, GDSKW9, GDSKW16 GDSCSLONG, GDSSCR6, GDSV2, GDSC1
Double Deburrer
Deburrs both sides of workpiece at same time. Double Deburrer features underneath safety guard.
2 blade holders 2 mm Hex Key
Telescopic Multifunction Deburring Tool
Multi-Component Handle (GDSTSDMK) & blade holder Standard Deburring blades: GDSC10, GDSC15, GDSC20, GDSC30, GDSC35
PN: GDDB
$19
.00
Pack of 5 Hex handle Deburring Tools Set of 5 3/8" Hex Handle Deburring Tools A/F Hex. Aluminium body handle with replaceable GDSC10 blades.
Deburring Tool with 3 MC 3.2 mm blade
6 mm Heavy Duty Quick Release Deburrer
PN: GN80
$11.95
PN: GD38325
$38.00
3.2 mm Standard Quick Release Handle (GDSDSDMK) with Multi‑cutting Edge Deburring blades: GDSMC10, GDSMC20, GDSMC101
Double Deburrer blade set
Pack of 10 Hex Handle Pocket Deburrers Set of 10 Hex Handle Pocket Deburrers. 8 mm Hex Aluminium body handle with Pocket clip & C-10 blade. Blade cannot be replaced.
PN: GD38333
$29.00
PN: GD86060 PN: GDSRSDMKK
$30.00
6 mm Heavy Duty Quick Release Handle (GDSRSDMK) with 6 mm General Purpose Blade (GDSR10S).
Page 29 - Hand Tools
$56.00
PN: GD86110
$56.00
Hand Tools Gear & Bearing Splitting Combination Set
Multi-Hydraulic Gear Puller Kit Bearing Separator
Small Bearing Separator
S45C Drop Forged hardened Bearing Separator.
Jaw Range: 30-50 mm Working Range: 0-135 mm
Working Range: 0-370 mm Jaw Range: 75-105 mm
Large Bearing Separator
Gear Puller
Jaw Range: 50-75 mm Working Range: 0-180 mm
Working Range: 0-185 mm Set includes: Twin & Triple Leg Heads Hydraulic Ram (12 Ton capacity) Carbon Steel Beam 200 mm, 150 mm, & 100 mm arms 85 mm, 35 mm, Spacers 25 mm Centre Adapter
Includes Centre Adapter. S45C Drop Forged hardened Main Beam and Bearing Separators.
PN: GBTK
PN: GHPK
$189.00
$499.00
RIVETING TOOLS
Made in Japan.
Hand Operated Nutsert Set Set includes aluminium M4, M5, M6 & Steel M6 nutserts, M4, M5, M6 Mandrels and instructions.
Heavy Duty Hand Riveter
Riveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.
Extra nutserts available in packs of 50
PN: SNPRO3000
$49.00
PN: SNSC456
$169.00
Heavy Duty Long Nose 2-way Hand Riveter
Long Handled Nutsert Tool
• Sets nutserts into Aluminium & Steel Includes: M4, M5, M6, M8, M10 Mandrels Weight: 1.5 kg
PN: SNHN096
$295.00
Heavy Duty Air/ Hydraulic Nutsert Tool
Lazy Tongs Heavy Duty Hand Riveter
This heavy duty tool is suitable for setting aluminium, steel and stainless steel nutserts from 4 mm to 10 mm. Manual nutsert release spindle. Includes: M4, M5, M6, M8, M10 mandrels, Weight: 1.5 kg
Aluminium & steel nutserts available in packs of 50.
Extended Length: 860 mm Contracted Length: 310 mm Riveting sizes: 3.2, 4.0, 4.8 mm SNSC50 PN: SNAN800
$959.00
$195.00
Page 30 - Hand Tools
Riveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.
SN10000
$115.00
ENGINEERING EQUIPMENT MADE IN
JAPAN
SCREW PITCH GAUGES
DIVIDERS & CALIPERS Spring Divider 12”
8” Divider PN: FM0218
$24
PN: FM0912
$25.00
.00
8” Inside Caliper PN: FM0238
Inside Caliper 12” PN: FM1012
$24.00
$25.00
8” Outside Caliper Outside Caliper 12” Metric & Whitworth Pitch Gauge Range: Whitworth 60° 4-62, Metric 55° 0.25-6 52 Leaves
Unified 60° Pitch Gauge
Unified 60° Pitch Gauge
Range: Metric 60° 4-42 TPI 30 Leaves
Range: Metric 60° 0.25-2.5 mm 28 Leaves
PN: FT163
PN: FT006
$48.00 Range: 0.75 to 5 mm Increments: 0.25 mm Range: 5.5 to 13 mm Increments: 0.5 mm
$25.00
5 PIECE PIN PUNCH SET
6 Piece Hollow Punch Set
$38.00
RADIUS GAUGES
$24
PN: FM1112
.00
HOLLOW PUNCH SET
PN: FT156
$38.00
PN: FM0228
Set includes: 5 mm, 6 mm, 8 mm, 9 mm, 11 mm, & 13 mm.
Length: 200 mm Sizes: 3.2, 4.8, 6.4, 8, 9.5 mm
PN: YC516
$25.00
PN: GPP5
PN: FT272MA
$39
$28.00
.00
PN: FT272MB
$49.00 Pocket Depth Gauge
Welding Gauge Metric
Range: 0-50 mm
Range: 0-50 mm
FEELER GAUGES 150 mm Feeler Gauge Set
200 mm Feeler Gauge Set
300 mm Feeler Gauge Set
20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm
20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm
20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm
PN: FTPDG50
$69.00
PN: GFG150
$22.00
PN: FTNWG94
$94.00
HEAVY DUTY TROLLEYS Heavy Duty Parts Trolley
$25
1 5 0 Kg!
$35.00
.00
Max Load Heavy Duty 3 Shelf Parts Trolley
PN: GFG300
PN: GFG200
Heavy Duty Parts Trolley
Takes Up Thoelf! 1 0 0 Kg P e r S
Max Load
1 5 0 Kg! 1.6 mm steel uprights. Max Load: 150 Kg 410W x 760D x 885H mm
PN: GT3S
$239
.00
3 Shelves, side container and drawer 1.6 mm steel uprights 470W x 785D x 825H mm
PN: GT3SD
$279
Page 31 - Engineering Equipment
.00
Max Load: 200 Kg 500W x 873D x 880H mm
PN: CTH5086
$445.00
ENGINEERING EQUIPMENT 150 mm Plate Shear Cuts up to 5 mm Mild Steel
NUMBER & LETTER PUNCHES
PN: PS6
$235.00
Each set packed in a ABS-red strong plastic case. Made from S 55C High carbon steel, HRC 58~60 Degrees. Kit includes: One Piece Type Holder, hexagon wrench, Steel types* 100 piece (A-Z, 0-9 ,& ,/ ,- , blank space). The holder can accommodate 9 pieces of our 3 MM steel types.
3 mm Punch Holder Set PN: GYC610-3
$399
.00
6 mm Punch Holder Set PN: GYC610-6
$499.00
36 Piece/4 mm Letter & Number Punch Set
WORK LAMPS
9 Piece/6 mm Number Punch Set OTHER SIZES AVAILABLE
OTHER SIZES AVAILABLE
PN: GYC602-6
$32.00
PN: GYC607-4
$55.00
90 LED Magnifier Work Lamp 90 Super Bright LED’s (Ø290 mm Array) Glass Lens 3 x Magnification (Ø120 mm) All metal frame construction 240V mains power (2 Metre Cord) Bench mounted up to 55 mm thickness.
PN: ML90
$169.00
VICES
ANGLE VICES 60 mm Opening Welders Angle Vice
Drill Press Vice 4” Drill Press Vice PN: TV102-4
$38
Halogen Lamp Medium Arm
.00
6” Drill Press Vice PN: TV102-6
$68
.00
PN: TV274
$129.00
100 mm Opening Welders Angle Vice PN: TV275
$179.00
24 Volt/70W PN: AL101A
$149.00 Halogen Lamp Medium Arm 24 Volt/70W
Compact Halogen Lamp Halogen Lamp no arm 24 Volt/70W
8 Drill Press Vice PN: AL101B
$139
.00
Machine Vice. Holds round workpieces. Reversible mount for smaller bar diameters.
PN: AL101C
$129.00
240V to 24V Transformer To Suit AL Halogen Lights (Safety Approved No. N16803)
ROUND VICE
PN: GVSR
$299.00 4” Cross Vice PN: TV144-4
$110
.00
6” Cross Vice PN: TV144-6
$195.00
PN: AL24024
$79.00
Page 32 - Engineering Equipment
PN: TV122-8
$299.00
ENGINEERING EQUIPMENT Made in Italy.
SOLUBLE CUTTING OIL 1 Litre Soluble Cutting Oil Mix with water 1:10
5 Litre Soluble Cutting Oil Mix with water 1:10
Range: 0 mm-13 mm.
J6 Mount Keyless 16 mm Drill Chuck. Range: 3 mm-16 mm.
3/8” Mount LD 10 mm Keyless Drill Chuck
KEYED CHUCKS
SOLOIL1
$19.00
PN: PORLDP10F38R Capacity: 1.5-10 mm Mount: 3/8” x 24 TPI
SOLOIL5
1/2” Mount LD 10 mm Keyless Drill Chuck
$69.00
$59.00 EA
J6 MOUNT KEYLESS CHUCKS J6 Mount Keyless 13 mm Drill Chuck.
KEYED CHUCKS
PN: VKD102
$110
.00
Capacity: 2.5 mm-13 mm. Includes Key
J6 Mount Keyed 16 mm Drill Chuck
PN: VKD104
$129
.00
Capacity: 2.5 mm-16 mm. Includes Key
KEYLESS CHUCKS SPANNERS Spanner to suit a VKD102 Keyless Chuck J6 Mount. PN: VKD102SPANNER
Spanner to suit a VKD104 Keyless Chuck J6 Mount. PN: VKD104SPANNER
J6 Mount Keyed 13 mm Drill Chuck
PN: PORLDP10F12R Capacity: 1.5-10 mm Mount: 1/2” x 20 TPI
3/8” Mount LD 13 mm Keyless Drill Chuck
PN: PORA13J6
$55.00
PN: PORLDP13F38R Capacity: 2-13 mm Mount: 3/8” x 24 TPI
PN: PORAP16J6
$95.00
1/2” Mount LD 13 mm Keyless Drill Chuck
$74.75 EA
PN: PORLDP13F12R Capacity: 2-13 mm Mount: 1/2” x 20 TPI
HSS Cross Hole Countersink Bits
HSS Counter Sink Set
Machined from High Speed Steel.
5 Piece HSS Cross Hole Style Countersink Set
$16.00 EA
Sizes include: 2-5, 5-10, 10-15, 15-20, 20-25 mm / 90°
DRILL CHUCK ARBOR
PN: GCS5S
$129.0
Drill Chuck Arbor MT2 x J6 PN: DCAMT2J6
$19.00
Size: 25-30 mm / 90° Size: 35-40 mm / 90° Shank Dia: 15 mm Shank Dia: 15 mm
Drill Chuck Arbor MT3 x J6
PN: GCS2530
$59
PN: DCAMT3J6
$23
.00
PN: GCS3035
PN: DCAMT4J6
$65
.00
STAINLESS HARDENED RULES 150 mm Stainless Hardened Dual Scale Rule 300 mm Stainless Hardened Dual Scale Rule
PN: GCS3540
$89.00
Size: 30-35 mm / 90° Size: 40-50 mm / 90° Shank Dia: 15 mm Shank Dia: 18 mm
Drill Chuck Arbor MT4 x J6
$32
.00
PN: AS1015
$6.90
PN: AS1030
$13.80
.00
PN: GCS4050
$199
.00
Centre Drill Set 5 Piece Centre Drill Set Sizes 1 to 5 PN: GCDS
$32.00 Page 33 - Engineering Equipment
3 Flute HSS Countersinking Bit Set Tinite coated 12 Piece Set Sizes include: 2-25 mm / 90° PN: GCS3F12
$169.00 3 Piece Double Spiral Step Drill Set 4-12 mm, 4-20 mm, 4-32 mm HSS Tinite Coated PN: G3SD
$139.00
LAST CHANCE LIQUIDATION SALE!
PRICED TO
MOVE!
VERNIER PROTRACTOR
COMBINATION SET SQUARE Includes Square Head, Centre Head, Ruler and Protractor Head
RRP $110
Set includes: Protractor, Aux. Arm, 150 mm, 200 mm, 295 mm arms
Now $CO7MB9 PN: MSET
RRP $65
Now: UB$PV3ER 9
Range: 0-360° Increments: 5 amin
DEPTH VERNIERS 150 mm Depth Vernier
RRP $39
NowST$O2C5K!
Range: 0-150 mm LOW PVER150 PN: DE Increments: 0.02 mm
200 mm Depth Vernier
RRP $44
$25 No:w DEPVER200
Range: 0-200 mm PN Increments: 0.02 mm
RRP $39
6” Depth Vernier
NowST$O2C5K!
LO W Range: 0-6” PN: DEPVER6 Increments: 1/1000”
PN
UNIVERSAL BEVEL PROTRACTOR Range: 0-320° Increments: 2 amin
RRP $119
$69 Now : UNIVBEV PN
RRP $44
8” Depth Vernier
NowST$O2C5K!
LOW Range: 0-8” PN: DEPVER8 Increments: 0.001”
PRECISION LEVEL Accuracy: 250/0.2 mm per 1000 mm
300 mm Depth Vernier
RRP $55
Now $29
K! Range: 0-300 mm LOW STOC 0 ER30 Increments: 0.02 mm PN: DEPV
Telescopic Gauge Set Six Piece Set Range: 8-150 mm
RRP $54
Now: TELC$HI3N 5 PN
RRP $55
12” Depth Vernier
NowST$O2C9K!
LOW Range: 0-12” PN: DEPVER12 Increments: 0.001”
RRP $149
Now: GP$L25099 PN
Micrometer BORE DIAL Stand with Fine GAUGES adjustment • Magnetic base with switch
35 mm Dial Bore Gauge
• V-block base
Range: 18-35 mm Accuracy: ±0.01 mm
RRP $45
160 mm Dial Bore Gauge
PN
Range: 50-160 mm Accuracy: ±0.01 mm
No:wMAGS$TA2ND9
250 mm Dial Bore Gauge Range: 160-250 mm Accuracy: ±0.01 mm
DIGITAL DUAL SCALE VERNIER
450 mm Dial Bore Gauge Range: 250-450 mm Accuracy: ±0.01 mm
1000 mm Dual Scale Digital Vernier 0-1000 mm / 0-40” Graduations 0.01 mm / 0.001”
RRP $799
$489! Now ST OCK LOW
PN: DIGVER40
Page 34 - Engineering Equipment
RRP $89
Now $O7C9K! LOW ST
PN: DBORGA18
RRP $149
Now $O7C9K! LOW ST
PN: DBORGA50
RRP $189
NowST$O7C9K! LOW
PN: DBORGA16
0
RRP $189
NowST$O9C9K! LOW
PN:
DBORGA250450
1.5” Dial Bore Gauge
RRP $149
NowST$O7C9K!
LOW Range: 0.7-1.5” PN: DBORGA07 Accuracy: ±0.0001”
6” Dial Bore Gauge
RRP $189
NowST$O7C9K!
LOW Range: 2-6” DBORGA26 Accuracy: ±0.0001” PN:
16” Dial Bore Gauge
RRP $189
Now $79
K! LOW STOC Range: 10-16” DBORGA1016 : PN Accuracy: ±0.0001”
LAST CHANCE LIQUIDATION SALE! OUTSIDE METRIC MICROMETERS P $155 250 mm Micrometer RR
Metric Dial Gauge PN: DGAI1K
PN: DGAM25K
Range: 225-250 mm Increments: 0.02 mm
Range: 0-25 mm Increments: 0.01 mm
Range: 0-1” Increments: 0.001”
Includes Dial Indicator, 22 Piece Contact Points Set and blow‑mold case.
Includes Dial Indicator, 22 Piece Contact Points Set and blow‑mold case.
NowST$O6C9K! LOW
PN: MIC22525
0
Now $69!
Range: 250-275 mm Increments: 0.02 mm
Range: 75-100 mm Increments: 0.02 mm
K LOW STOC 5 PN: MIC25027
RRP $65
300 mm Micrometer RRP $185
PN
Range: 275-300 mm Increments: 0.2 mm
$39 Now : MIC75100
NowST$O6C9K! LOW
PN: MIC27530
175 mm Micrometer RRP $110
500 mm Micrometer RRP $369
Range: 150-175 mm Increments: 0.02 mm
Range: 400-500 mm Increments: 0.02 mm
Now $65
K! LOW STOC PN: MIC15017
P $125 200 mm Micrometer RR
NowST$O6C5K!
Range: 175-200 mm Increments: 0.02 mm
LOW
PN: MIC17520
225 mm Micrometer Range: 200-225 mm Increments: 0.02 mm
5
0
RRP $139
NowST$O6C9K! LOW
PN: MIC20022
5
0
3” Micrometer Range: 2-3” Increments: 0.0001”
4” Micrometer Range: 3-4” Increments: 0.0001”
4-5” Micrometer Range: 4-5” Increments: 0.0001”
6” Micrometer
NowST$O3C5K!
LOW
PN: MIC40050
0
Now ST$O2C7K9!
Range: 500-600 mm Increments: 0.02 mm
LOW
PN: MIC50060
0
800 mm Micrometer RRP $755
$599! Now ST OCK
Range: 700-800 mm Increments: 0.02 mm
RRP $65
NowST$O3C9K!
10” Micrometer
RRP $89
11” Micrometer
PN: MIC34
NoPNw: MI$C455 5 RRP $95
Range: 5-6” Increments: 0.0001”
NowST$O6C5K!
7” Micrometer
RRP $110
Range: 6-7” Increments: 0.0001”
8” Micrometer Range: 7-8” Increments: 0.0001”
9” Micrometer
PN: MIC23
LOW
LOW
PN: MIC56
NowST$O6C5K! LOW
PN: MIC67
RRP $125
Now $65! LOW STOC PN: MIC78
K
Set & FREE Points Case! Blow‑Mold $39.00 EA
600 mm Micrometer RRP $455
Range: 8-9” Increments: 0.0001”
LOW
Imperial Dial Gauge
$259! Now ST OCK
LOW
PN: MIC70080
0
OUTSIDE IMPERIAL MICROMETERS RRP $49
MOVE!
1” Dial Indicator & Point Sets
69 275 mm Micrometer RRP $1
100 mm Micrometer
PRICED TO
Range: 9-10” Increments: 0.0001”
Range: 10-11” Increments: 0.0001”
12” Micrometer Range: 11-12” Increments: 0.0001”
16” Micrometer Range: 12-16” Increments: 0.0001”
20” Micrometer Range: 16-20” Increments: 0.0001”
RRP $139
250 mm Tubular Micrometer Accuracy: ±0.01 mm Range: 50-250 mm
NowST$O6C9K!
RRP $195
NoPNw: MI$CT1UB10
Increments: 0.01 mm Range: 0-25 mm
LOW
PN: MIC89
RRP $98
RRP $155
NowST$O6C2K!
NowST$O6C9K!
LOW
LOW
PN: MICDEP02
PN: MIC910
RRP $169
NowST$O6C9K! LOW
PN: MIC1011
RRP $185
NowST$O6C9K! LOW
PN: MIC1112
RRP $339
Now ST$O15CK9!
100 mm Tubular Micrometer Extension
LOW
PN: MIC1216
RRP $65
RRP $369
$35 No:w MICTUBEX T
Now $159! LOW STOC
K
PN
PN: MIC1620
OUTSIDE MICROMETERS SETS
INSIDE MICROMETERS
6-12” Micrometer Set
4” Inside Micrometer
Set includes 6 Micrometers
Range: 3-4”
RRP $569
$299! Now ST OCK LOW
25 mm Depth Micrometer
PN: MICSET61
2
RRP $110
NowST$O6C5K! LOW
PN: MICIN34
Page 35 - Engineering Equipment
5
Distributed by:
Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.
MOBILE SORTING CARTS
PIVOT DRAWERS See full range on page 24.
6 Compartment Pivot Drawer Set.
PN: FO306
Wall mountable
Mobile Tip Out Sorting Cart C/W 2 x FO308, 2 x FO306, 2 x FO605 and 2 x FO604 600W mm x 1200H mm
8 Compartment Pivot Drawer Set.
PN: FO308
$24.00
Wall mountable
PN: MSFO4568
$489
$24.00
300W x 86D mm x 250H mm
.00
300W x 67D mm x 200H mm
5 Compartment Pivot Drawer Set.
Double Sided Mobile Tip Out Sorting Cart
Wall mountable
C/W 4 x FO308, 4 x FO306, 4 x FO605 and 4 x FO604
PN: FO605
$34
600W mm x 103D mm x 150H mm
.00
4 Compartment Pivot Drawer Set. Wall mountable
PN: FO604
$42.00
600W mm x 140D mm x 200H mm
600W mm x 1200H mm PN: MSFO4568X2
$644.00
SURFACE PREP ACCESSORIES 50 mm Quick-Lock Mini Flap Discs 60 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) PN: AB22012F60
See full range on page 9.
NEW!
80 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) PN: AB22012F80
Pack of 5.
$22.00 EA
75 mm Quick-Lock Sanding Discs
360° Keyless 10 mm Drill Attachment Chuck Capacity. 1.5-10 mm Angle Range: 360° / 16 increments Max. speed: 3500 RPM Max torque: 35 Nm Drive: 6 mm Hex Weight: 465 G
NEW!
36 Grit Sanding Discs 75 mm Quick-Lock (Pack of 5) PN: AB22013S36
NEW!
Pack of 5.
80 Grit Sanding Discs 75 mm Quick-Lock (Pack of 5) PN: AB22013S80
$14.00 EA
3” Quick-Lock Preparation Kit 7 Piece kit includes 1 of each: 1/4” shank, 3” backing pad, 24 Grit 3” disc, 36 Grit 3” disc, 50 Grit 3” disc, Brown (Coarse) surface prep 3” disc & Maroon (Medium) surface prep 3” disc.
NEW! PN: GPK3
$39
.00
• Fits all standard power tools and screwdrivers. • Includes T handle locking wrench. • Metal Body, Hard Nylon chuck
Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at time of printing. M. Gamer Pty. Ltd. and National Tool Distributors will do everything possible within reason to maintain stocks of products. M. Gamer Pty Ltd and National Tool Distributors reserves the right to change prices without notice. ALL PRICES QUOTED INCLUDE GST.
PN: PORRADAV360CL
$249.00
Made in Italy.