Settings

CONVIO and CONVIO Flex Cutterbar

Knife in Full Flex

Check that the knife is in good condition in order for it to work effectively. This involves replacing damaged or broken sections.

Lifters

It is recommended that lifters should be fitted to CLAAS cutterbars except the CONVIO FLEX. Fitting the lifters will help lift the crop onto the table.

The lifters should be fitted by placing the first one on the fifth finger from the RHS of the cutterbar and then on every fourth one thereafter.

Auger Finger Position

Long crop = Lower hole (A)

Short crop = Upper hole (D)

Drilled holes (E) and (F) cannot be used.

Unscrew bolt (1)

Slacken off bolt (2)

Adjust the fingers using the lever (3)