ULISSE DESK / ULISSE DINING ULISSE DESK design giulio manzoni/r&s clei Transformable system with vertical tilting double bed ready to use, provided with a front table that disappears while the bed folds down.
ULISSE DINING design giulio manzoni/r&s clei Tilting double bed with vertically opening, with slatted bed base. In the day configuration it is provided with a front table perpendicular to the front panel that disappears while the bed opens, sliding and remaining located underneath the bed base.
EN
Dimensions : Closed 2200 x 1670 x 920 mm / 86.6 x 65.7 x 36.2 inches Open 2200 x 1670 x 2142 mm / 86.6 x 65.7 x 84.3 inches Height of bed base from floor 259 mm / 10.2 inches Desk 1580 x 600 x 22 mm /62.2 x 23.6 x 0.9 inches Height of desk from floor 737 mm / 29 inches
Dimensions : Closed 2200 x 1670 x 1665 mm / 86.6 x 65.7 x 65.6 inches Open 2200 x 1670 x 2142 mm / 86.6 x 65.7 x 84.3 inches Height of bed base from floor 307 mm / 12.1 inches Table 1350 x 786 x 22 mm/53.1 x 31 x 0.9 inches Height of table from floor 720 mm / 28.3 inches
TECHNICAL INFORMATION Structure in wood with adjustable feet in nylon. Opening mechanism of the bed throught gas springs Bed base with frame in reinforced tubular iron and multilayer bent beech wood slats, fixed to the frame with nylon/rubber gaskets. Mattress: spring mattress, Reinforced Latex mattress, 50% Memory mattress. Mattress locking belts in nylon with fastener in black nylon Available Finishes: Structure: Melamine White Dover, Melamine Whited Oak or Gaphite Oak, Lacquer Clei colours system . Front panel: Melamine White Dover, Melamine Whited Oak or Gaphite Oak, Lacquer, Clei colours system , Glossy white Dialux , Wood Whited Oak or Graphite Oak or Tobacco Oak. Back panel always in Melamine White REMARK - INSTALLATION AND SAFETY This model is supplied disassembled and its easy installation is supported by comprehensive instructions. It is compulsory to fix it to the wall, in 4 fixing points, using the proper hardware supplied by CLEI (squares, rawlplugs with diameter 9mm/0.4 inches and the couple nut-bolt) and following the assembling instructions provided together with the goods A plasterboard is not a suitable wall and the fixation can not be considered safe. (see assembling instructions) The installator is in charge to test the correct fixing and to provide with workmanlike installation. The opening system is fixed to the structure with gears that remain perfectly tighten in both the day and the night positions. Maximum weight supported by the bed: kg. 200
Clei UK Telephone 0207 823 9090 Facsimile 0870 125 9464 Email info@clei.co.uk Web www.clei.co.uk
1