Refrigeration Panel - FRIGOPAP Refrigeration panel is aimed at the construction of refrigerated and agroindustrial premises by means of assembling vertical and roof panels.
They can also be used for controlled environment areas or air conditioned areas, either with positive or negative temperatures. This type of panel is available in smooth, patterned and corrugated finishes.
REFRIGERATION PANEL - FRIGOPAP
FrigoPAP refrigeration panels are corrected at the end of the continuous line by a mill in order to guarantee minimum assembly tolerances for optimum insulation.
Triple tongue and groove joint system for optimum insulation
Detail of the assembly
Technical Specifications • • • •
Available thicknesses: 40, 60, 80, 100, 120, 150, 180 y 200mm Useful width: 1185mm • Maximum lenght: 13,5m PIR: B-s1, d0 • Minimum standard lenght: 2m PUR: B-s2, d0 • Triple tongue and groove joint system
WEIGHT Thickness (mm)
40 60 80 100 120 150 180 200
THERMAL TRANSMISSION 2
Approx. mass (Kg/m ) based on the thickness of the metallic faces 0,5/0,5 10,10 11,00 11,90 12,80 13,40 14,70 16,00 16,80
Paneles Aislantes Peninsulares S.L. Parcela 62-B – Polígono 505 16440 Montalbo – Cuenca Spain Tel: 969 130 928 | Fax: 969 130 325
Nominal Thickness (mm) U (W/m2K) 40 60 80 100 120 150 180 200
0,52 0,35 0,27 0,21 0,18 0,14 0,12 0,11
info@panelespap.com | wwwpanelespap.com
Load table • • • •
Load values for uniformly-distributed vertical loads Deviation from flatness <= L / 200 Admissible span (metres) Equivalence: 1 Kgf = 0,98daN 2 Supports / 1 Span
3 Supports / 2 Spans
THICKNESS (mm) / LOAD (daN/m2) 40 60 80 100 120 150 160 180
60 3,00 3,80 4,50 4,90 5,50 6,20 6,90 7,20
80 2,90 3,55 4,00 4,45 4,90 5,55 6,50 6,80
100 2,70 3,30 3,70 4,10 4,50 5,10 5,60 6,50
120 2,50 3,00 3,35 3,75 4,10 4,60 5,10 5,50
150 2,20 2,60 2,90 3,20 3,60 3,95 4,60 5,00
THICKNESS (mm) / LOAD (daN/m2) 60 80 100 120 150 40 3,40 3,20 3,00 2,80 2,50 60 4,40 4,10 3,75 3,45 3,00 80 5,20 4,65 4,25 3,90 3,35 100 5,80 5,15 5,75 4,30 3,70 120 6,40 5,70 5,25 4,75 4,05 150 7,00 6,25 5,75 5,20 4,45 160 7,50 7,10 6,10 5,70 5,00 180 7,80 7,25 6,25 5,50 4,95
Tolerancias COMMON TOLERANCES FOR PAP PANELS Panel Thickness Panel height Panel lenght
Tolerance (maximum permissible) D ≤ 100mm ± 2mm D > 100mm ± 2% W ± 2mm L ≤ 3m ± 5mm D > 3m ± 10mm
Paneles Aislantes Peninsulares S.L. Parcela 62-B – Polígono 505 16440 Montalbo – Cuenca Spain Tel: 969 130 928 | Fax: 969 130 325
Measurement method D.2.1 D.2.1 D.2.6 D.2.5 D.2.5
info@panelespap.com | wwwpanelespap.com