Wayne Water Systems Catalog 2011 by Clipper Magazine

SL8277 v3 5/11

WORRY-FREE

WATER

HANDLING

SOLUTIONS

the history of wayne water systems In 1928, Norbert G. Berghoff founded the Wayne Home Equipment Company located in Fort Wayne, Indiana. The Berghoff family was also known for owning and operating the famous Berghoff Brewery in Fort Wayne. Wayne Home Equipment manufactured oil burners for use in home furnaces, water and space heaters, boilers, and industrial ovens. Wayne became quite successful in the oil burner business, but faced the challenge that oil burners were seasonal in nature. Fall and winter months became the high production periods for oil burners, creating the need for a complementary product that would increase Wayneâ&#x20AC;&#x2122;s business in the spring and summer months. Manufacturing water pumps became the solution to the balance out this seasonality. In the 1940s, Wayne entered the water pump industry by acquiring the Zepher Pump Company, located in Decatur, Illinois. Wayne moved the Zepher facility to Fort Wayne, with its oil burner division to reduce manufacturing and transportation costs. In 1978, the Berghoff family made the decision to sell their home equipment company to the Scott Fetzer corporation. The Wayne Home Equipment Company remained in Fort Wayne, until August of 1991, when it moved to its current location in Harrison, Ohio. With more than 70 years in the business, Wayne has become a dominant player in the water pump industry. We continue to bring market leading innovation to homeowners who need worryfree water handling solutions.

WAYNE offers a full line of sump, utility, sewage, effluent, well, lawn, pool, specialty pumps and systems, and accessories. Our business team is customer focused, continuously developing innovative products for homeowners, creating packaging and merchandising to make the in-store experience easier, providing fast delivery and superior after-the-sale support.

table of contents

SUMP PUMPS

answer guide 3 combination systems 5 back-up systems 9 cast iron submersible 11 thermoplastic submersible 14 pedestal 18

UTILITY PUMPS

answer guide 19 gasoline-powered 21 submersible 23 transfer 25 condensate 26

SEWAGE/EFFLUENT PUMPS

answer guide 27 commercial 29 residential 30 sewage systems 32 effluent 34

WELL PUMPS

answer guide 35 shallow 37 convertible 38 deep well submersible 39 air tank systems 40

LAWN PUMPS

answer guide 41 portable 43 permanent 43

POOL PUMPS

answer guide in and above ground

44 44

pressure booster system laundry tray system

45 45

SPECIALTY 45

ACCESSORIES 46 accessories 46

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS

answer guide

WHAT IS A SUMP PUMP?

WHAT TYPE OF SUMP SYSTEM DO YOU NEED?

A sump pump is an automatic pump used to remove ground water from a sump pit. The most common application is for basement drainage to prevent residential flooding. WAYNE offers a complete line of primary sump pumps, emergency back-up systems, and accessories.

WHAT IS THE DIAMETER OF YOUR SUMP PIT?

If your sump basin is between 11" and 14” wide, you may use a pump with iSwitch™ Technology, mechanical float, or diaphragm switch. Larger sump basins (14” or wider) accommodate either mechanical, diaphragm or tethered float switches.

IS AN ELECTRICAL OUTLET NEAR THE PUMP?

All pedestal and submersible sump pumps have a three-pronged, grounded plug and a 120 Volt, 60 Hz, single phase motor with overload protection. You need a three-wire, GFCI grounded receptacle within four feet above the floor near your sump. Do not use an extension cord.

HOW MUCH HORSEPOWER (HP) DO YOU NEED?

In general, the more horsepower, the better. Pump performance depends on how high and how fast you want to pump the water.

SUMP PUMP INSTALLATION

Place the new unit on a solid, level foundation in the drained sump pit. Remove any silt or debris from the sump pit and surrounding area. Thread check valve into pump body. The pump has a 1½” NPT discharge. If the existing piping is smaller, use an adapter.

Discharge Pipe

PRIMARY SUMP PUMPS

Inlet Pipe

Minimum 24” For Pedestal Sump Pumps

Check Valve

Primary Sump Pumps are automatic pumps used to remove ground water from sump pits. They are powered by household electricity. There are two types of Primary Pumps: Submersible and Pedestal. INSTALLATION HIGHLIGHTS:

If replacing an existing pump, remove the old pump carefully. Place the new unit on a solid, level foundation in the drained, clean sump pit. Connect the check valve to the discharge pipe and tighten the hose clamps. Plug in power and fill the pit with water. If you have installed a submersible pump it will start automatically at the preset level. Finally, place the discharge pipe so it carries water several feet away from the foundation.

Minimum 11” For Float, iSwitch, and Diaphragm Switch Primary Sump Pumps Minimum 14” For Tether Float Switch Primary Sump Pumps

This system combines the performance of a primary 120 V submersible sump pump with the protection of a 12 V battery backup sump pump into one complete system. INSTALLATION HIGHLIGHTS:

GFCI Protected Outlet

Minimum 22” For Submersible Sump Pumps

COMBINATION PUMP AND BATTERY BACK-UP SYSTEMS

TOOLS NEEDED:

PVC cement, screwdriver, pipe wrench, adjustable wrench, hacksaw, and pipe clamps.

Connect rigid pipe to rubber boot on check valve. Tighten hose clamps. Plug in power and fill the pit with water.

TOOLS NEEDED:

PVC cement, screwdriver, pipe wrench, adjustable wrench, hacksaw, and pipe clamps.

BATTERY BACK-UP SYSTEMS

WATER POWERED BACK-UP SYSTEMS

Powered by a sealed-lead acid battery, these 12 V pumps protect your basement against flooding during power outages or primary pump failure. When used with a primary pump, the back-up sump pump completes your sump pump system, for maximum protection.

Protect your basement from water...with water! Added protection during power failure or primary pump failure. Powered by municipal water pressure, there’s no need for electricity or batteries! INSTALLATION HIGHLIGHTS:

Turn power to main pump off. Add a check valve between the back-up pump and the primary pump.

Confirm your municipal water supply is a minimum of 40 PSI. Turn off power to main pump and unplug. A check valve must be installed between the primary pump and the tee or wye fitting.

Attach control box to the side of battery box. Plug the float switch, pump and charger into the control box.

Confirm a 2” clearance from pump to the base of the sump pit. Run a supply line with a ball valve.

Unplug your main pump and fill the pit with water. With your back-up pump pumping successfully, plug your primary pump in.

Assemble float rod and attach to automatic valve. Connect hose from water powered back-up pump to vacuum breaker.

TOOLS NEEDED:

Fill the sump pit with water and adjust float rod for on/off positions. Plug the primary sump pump in.

INSTALLATION HIGHLIGHTS:

PVC cement, screwdriver, pipe wrench, adjustable wrench, hacksaw, and pipe clamps.

TOOLS NEEDED:

Screwdriver, pipe wrench, adjustable wrench, hacksaw, and check valve.

For any questions regarding installation, please log onto www.waynepumps.com for help to the most frequently asked questions, answer guides, and manuals. For more assistance, call our customer service department at 1-800-237-0987, Monday - Friday, between 8 am - 5 pm EST. In addition, see our accessories section on page 51 to complete ALL your installation needs.

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS WA

PRIMARY PUMP AND BACK-UP SUMP SYSTEM

ANTY

SILENT SUMP SYSTEM WITH WIRELESS BACK-UP MONITORING!

PREASSEMBLED SUMP PUMP AND BACK-UP SYSTEM FOR QUICK AND EASY INSTALLATION!

T E C H N O L O G Y

5 WARR

S YSTEM INCLUDES: • Top suction, durable, cast iron primary pump • Vertical float switch for automatic operation • High flow, corrosion-resistant, battery back-up pump with reliable reed float switch • Battery box and charger • (2) Heavy-duty check valves Preassembled and preset for quick installation Simple drop-in installation! Designed for 15" diameter or larger sump basins

J OB-READY SYSTEM INCLUDES: • Rugged, stainless housing primary pump • Silent check valve • FloodAlert™ Wireless Monitoring System • PVC pipes • All stainless hose clamps • Rubber coupler • PVC cement required for installation (sold separately) • PVC primer required for installation (sold separately)

IF YOU ARE TIRED OF HEARING YOUR SUMP PUMP TURN ON AND OFF, THIS IS THE SYSTEM FOR YOU.

YEA

YEAR P

silent sump systems

120 VOLT PRIMARY PUMP • 1/2 HP primary pump pumps up to 4200 GPH @ 0’ • Added assurance for maximum basement protection! • Vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Approximate on level @ 9” - off level @ 4”

SUMP PUMP 3/4 HP • 4600 GPH @ 0’ Our rugged 3/4 HP motor with stainless steel housing construction is designed for long life and top performance. Moving 4600 gallons of water per hour, this pump is the right choice for the toughest basement conditions, when compared to the industry average. SILENT CHECK VALVE Our silent check valve is designed to eliminate the loud clunking noise often associated with standard check valves. The noise is caused by water contained in the discharge pipe flowing back into the pit when the pump turns off. Our check valve closes very quickly, eliminating the noise.

SSSEE980

FLOW RATE IN GPH

10 5 0

1000

2000

3000

4000

EE980

FLOW RATE IN GPH

25 20 15 10

5000

PERFORMANCE

(Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)

• Alarm system, with status indicator lights, lets homeowner know when back-up system is active • Designed for easy installation • Battery case included

Model

Discharge Head

5’

10’

15’

20’

SSSEE980

Gallons/Hour

4300

3500

2550

1100

Our easy-to-install, job-ready system includes all the components for replacing your existing primary sump system. Simply complete the assembly of the included discharge pipe, cut your existing pipe to match the height of this system and then install.

5 0

500

1000

2000

3000

FLOW RATE IN GPH

PRIMARY (CDU800)

TOTAL DYNAMIC HEAD (FT.)

FLOODALERT™ WIRELESS SUMP PUMP MONITORING SYSTEM Since the Silent Sump System operates so quietly, the Floodalert™ wireless monitoring system is included to sound an audible alarm if a high water condition occurs in the sump pit. The system’s receiver unit can be placed anywhere within your home for added security and convenience.

WSS30V

TOTAL DYNAMIC HEAD (FT.)

12 VOLT BACK-UP PUMP • High-capacity battery back-up pumps up to 3300 GPH @ 0’ • Corrosion-resistant thermoplastic construction • Reliable reed float switch for automatic operation •P rofessional grade back-up system keeps battery properly charged

20 15 10 5 0

4000

500

PERFORMANCE

1000

1500

2000

BACK-UP (ESP25)

3000

PERFORMANCE

Model

Discharge Head

5’

10’

15’

20’

Model

Discharge Head

0’

5’

10’

15’

CDU800

Gallons/Hour

3900

3150

2100

600

ESP25

Gallons/Hour

3300

2800

2300

1500

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS 3 WARR

3 WARR

24 VOLT BATTERY BACK-UP SYSTEM

PREASSEMBLED SUMP PUMP AND BACK-UP SYSTEM FOR QUICK AND EASY INSTALLATION!

PRIMARY PUMP AND BACK-UP SYSTEM

YEA

simple sump | back-up systems

• Pumps up to 3500 GPH @ 0’ • Heavy-duty, cast iron battery back-up sump pump system

S YSTEM INCLUDES: • Top suction, durable, cast iron primary pump with vertical float switch • High flow, corrosion resistant, battery back-up pump with reliable reed float switch • Battery box and charger • (2) Heavy-duty check valves

• Top suction design filters debris and minimizes clogging •P rofessional grade back-up system keeps battery properly charged (Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)

•A larm system, with status indicator lights, lets homeowner know when back-up system is active • Designed for easy installation

• Professional grade back-up system keeps battery properly charged

• Heavy-duty, cast iron, high performance 24 volt pump

(Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)

• Preassembled and preset for quick installation

• 4 hour silence button with automatic reset

ESP45

• Simple drop-in installation!

• 1½” NPT discharge

• Designed for 15” diameter or larger sump basins

• Reliable reed float switch for automatic operation

• 1/3 HP primary pump pumps up to 3800 GPH @ 0’ • High-flow battery back-up pumps up to 1750 GPH @ 0’ • Added assurance for maximum basement protection! • Top suction design filters debris and minimizes clogging

WSS20V

• Approximate on level @ 9” - off level @ 4”

FLOW RATE IN GPH

Model

Discharge Head

0’

5’

10’

15’

20’

CDU790

Gallons/Hour

3800

3450

2700

1700

100

ESP15

Gallons/Hour

1750

1410

720

300

10 5 0

500

1000

2000

3000

4000

PRIMARY (CDU790) BACK-UP (ESP15)

PERFORMANCE Model

Discharge Head

0’

5’

10’

15’

20’

ESP45

Gallons/Hour

3500

2880

2400

1750

900

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

FLOW RATE IN GPH TOTAL DYNAMIC HEAD (FT.)

20 15 10 5 0

1000

2000

3000

4000

ESP45

5000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS YEA

WARR

• For complete basement protection, add the perfect compliment to your primary sump pump system • Alarm and visual indicators lets homeowner know water level has risen • System receiver can monitor up to four locations in your home, for added security. (Additional transmitters sold separately) • Reliable reed float switch for automatic operation • Designed for easy installation

• Pumps up to 3300 GPH @ 0’ • Reinforced, corrosion-resistant, thermoplastic battery back-up sump pump system • Reliable reed float switch for automatic operation • Professional grade back-up system keeps battery properly charged (Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)

T E C H N O L O G Y

• Alarm system, with status indicator lights, lets homeowner know when back-up system is active

S YSTEM INCLUDES: • 3 V lithium battery • Transmitter (additional transmitters sold separately) • Reed float switch assembly • Receiver • Transformer • (3) Zip ties • Short tube • Clip

WSA120

• Designed for easy installation

• Reliable reed float switch for automatic operation • Professional grade back-up system keeps battery properly charged (Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)

• Alarm system, with status indicator lights, lets homeowner know when back-up system is active • Designed for easy installation

2 WARR

• Pumps up to 600 GPH @ 0’ • Protect your basement from water...with water!! •C orrosion-resistant, thermoplastic back-up pump system is powered by municipal water pressure. No electricity or batteries required! • Automatic switch with anti-siphon vacuum breaker • Adjustable float switch for automatic operation • Corrosion-resistant thermoplastic construction for long life

• Reinforced, corrosion-resistant, thermoplastic battery back-up sump pump system

EWP10

ESP15

FLOW RATE IN GPH

Model

Discharge Head

0’

5’

10’

15’

20’

ESP25

Gallons/Hour

3300

2800

2300

1500

100

ESP15

Gallons/Hour

1750

1410

720

300

10 5 0

1000

2000

3000

4000

5000

ESP25 ESP15

FLOW RATE IN GPH

PERFORMANCE Model

Discharge Head

0’

5’

10’

15’

EWP10

Gallons/Hour

600

582

312

156

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

WATER -POWERED BACK-UP SYSTEM

• Pumps up to 1750 GPH @ 0’

12 VOLT BATTERY BACK-UP SYSTEM

WARR

YEA

ESP25

WIRELESS BACK-UP MONITORING SYSTEM

YEA

12 VOLT BATTERY BACK-UP SYSTEM

WARR

YEA

back-up systems

20 15 10 5 0

120

240

360

480

EWP10

600

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS TY

• Pumps up to 4600 GPH @ 0’ • Durable, cast iron and stainless steel submersible sump pump • Vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Stainless steel, high performance 3/4 HP motor • 1½” NPT discharge and durable cast iron base • Float guard protects switch from hang-ups • 3/4 HP motor rated 10 Amps • Designed for 11” diameter or larger sump basins • Approximate on level @ 9” - off level @ 4”

Discharge Head

5’

10’

15’

20’

CDU980E

3/4

Gallons/Hour

4300

3500

2550

1100

EE980

3/4

Gallons/Hour

4300

3500

2550

1100

10 5 0

1000

2000

3000

4000

5000

CDU980E EE980

3 WARR

EE800

FLOW RATE IN GPH

PERFORMANCE

EE790

TOTAL DYNAMIC HEAD (FT.)

FLOW RATE IN GPH

• PUMP MORE WATER USING 50% LESS ENERGY! • SAVE UP TO $75 ANNUALLY! • 1/2 HP pumps up to 4200 GPH @ 0’ (EE800) 1/3 HP pumps up to 3800 GPH @ 0’ (EE790) • Durable, cast iron submersible sump pump • Vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Epoxy-coated, high performance motor • 1½” NPT discharge and durable cast iron base • Float guard protects switch from hang-ups • Designed for 11” diameter or larger sump basins • 1/2 HP motor rated 3.8 Amps 1/3 HP motor rated 3.65 Amps • Approximate on level @ 9” - off level @ 4”

Model

EE980

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

ENERGY EFFICIENT, CAST IRON WITH VERTICAL FLOAT SWITCH

CDU790 N

• PUMP MORE WATER USING 50% LESS ENERGY! • HANDYMAN Club Of America Tested and Recommended! • Pumps up to 4600 GPH @ 0’ • Durable, cast iron and stainless steel submersible sump pump • Vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Stainless steel, energy efficient 3/4 HP motor • 1½” NPT discharge and durable cast iron base • Float guard protects switch from hang-ups • 3/4 HP motor rated 4.0 Amps • Designed for 11” diameter or larger sump basins • Approximate on level @ 9” - off level @ 4”

• 1/2 HP pumps up to 4200 GPH @ 0’ (CDU800) 1/3 HP pumps up to 3800 GPH @ 0’ (CDU790) • Durable, cast iron submersible sump pump • Vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Epoxy-coated, high performance motor • 1½” NPT discharge and durable cast iron base • Float guard protects switch from hang-ups • Designed for 11” diameter or larger sump basins • 1/2 HP motor rated 10 Amps 1/3 HP motor rated 9.5 Amps • Approximate on level @ 9” - off level @ 4”

3/4 HP ENERGY EFFICIENT, STAINLESS STEEL AND CAST IRON SUMP PUMP WITH VERTICAL FLOAT SWITCH

CAST IRON WITH VERTICAL FLOAT SWITCH

YEA

CDU800 R

3 WARR

CDU980E WARR

STAINLESS STEEL AND CAST IRON WITH VERTICAL FLOAT SWITCH

YEA

5 WARR

YEA

submersible

Model

Discharge Head

5’

10’

15’

20’

CDU800

1/2

Gallons/Hour

3900

3150

2100

600

CDU790

1/3

Gallons/Hour

3450

2700

1700

100

EE800

1/2

Gallons/Hour

3900

3150

2100

600

EE790

1/3

Gallons/Hour

3450

2700

1700

100

1000

2000

3000

4000

CDU800 EE800 CDU790 EE790

5000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS A

• 1/2 HP pumps up to 4200 GPH @ 0’ (CDT50) 1/3 HP pumps up to 3800 GPH @ 0’ (CDT33) • Durable, cast iron submersible sump pump • Piggy-back tether float switch for automatic or manual operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Epoxy-coated, high performance motor • 1½” NPT discharge and durable cast iron base • Designed for 14” diameter or larger sump basins • Approximate on level @ 13” - off level @ 7”

3 WARR

CAST IRON WITH TETHER FLOAT SWITCH

2 WARR

YEA

submersible

STAINLESS STEEL AND THERMOPLASTIC WITH VERTICAL FLOAT SWITCH • Pumps up to 3900 GPH @ 5’ • Rugged, stainless steel and corrosion-resistant thermoplastic submersible sump pump • Vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Float guard protects switch from hang-ups • High performance 1/2 HP motor • 1½” NPT discharge and reinforced thermoplastic base • Designed for 11” diameter or larger sump basins • Approximate on level @ 9” - off level @ 4”

CDT33

SSPF50

3 WARR

CDT50

YEA

STAINLESS STEEL AND THERMOPLASTIC WITH TETHER FLOAT SWITCH • Pumps up to 3900 GPH @ 0' • Rugged, stainless steel and corrosion-resistant thermoplastic submersible sump pump • Piggy-back tether float switch for automatic or manual operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • High performance motor • 1½” NPT discharge and reinforced thermoplastic base • Designed for 14” diameter or larger sump basins • Approximate on level @ 13” - off level @ 7”

FLOW RATE IN GPH

Model

Discharge Head

5’

10’

15’

20’

CDT50

1/2

Gallons/Hour

3900

3150

2100

600

CDT33

1/3

Gallons/Hour

3450

2700

1700

100

10 5 0

1000

2000

3000

4000

5000

CDT50 CDT33

SSPT50

FLOW RATE IN GPH

PERFORMANCE

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

TOTAL DYNAMIC HEAD (FT.)

Model

Discharge Head

5’

10’

15’

20’

SSPF50

1/2

Gallons/Hour

3600

2800

1800

500

SSPT50

1/2

Gallons/Hour

3600

2800

1800

500

10 5 0

1000

2000

3000

4000

SSPF50 SSPT50

5000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS YEA

• 1/2 HP pumps up to 3900 GPH @ 0’ (SPF50) 1/3 HP pumps up to 3600 GPH @ 0’ (SPF33) • Reinforced, corrosion-resistant thermoplastic submersible sump pump • Vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Float guard protects switch from hang-ups • Epoxy-coated steel, high performance motor • 1½” NPT discharge and reinforced thermoplastic base • Designed for 11” diameter or larger sump basins • Approximate on level @ 9” - off level @ 4”

WARR

THERMOPLASTIC WITH VERTICAL FLOAT SWITCH

WARR

YEA

submersible

THERMOPLASTIC WITH VERTICAL FLOAT SWITCH • Pumps up to 2900 GPH @ 0’ • Reinforced, corrosion-resistant thermoplastic submersible sump pump • Piggy-back vertical float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Easy carry handle for portability • High performance motor • 1½” NPT discharge and reinforced thermoplastic base • Designed for 11” diameter or larger sump basins • Approximate on level @ 7” - off level @ 3”

YEA

WARR

• 1/2 HP pumps up to 3900 GPH @ 0’ (SPT50) 1/3 HP pumps up to 3600 GPH @ 0’ (SPT33) • Reinforced, corrosion-resistant thermoplastic submersible sump pump • Piggy-back tether float switch for automatic or manual operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Epoxy-coated steel, high performance motor • 1½” NPT discharge and reinforced thermoplastic base • Designed for 14” diameter or larger sump basins • Approximate on level @ 13” - off level @ 7”

Discharge Head

5’

10’

15’

20’

SPF50

1/2

Gallons/Hour

3600

2800

1800

500

SPF33

1/3

Gallons/Hour

3300

2500

1400

100

SPT50

1/2

Gallons/Hour

3600

2800

1800

500

SPT33

1/3

Gallons/Hour

3300

2500

1400

100

1000

2000

3000

4000

5000

SPF50 SPT50 SPF33 SPT33

WST50

WST30 FLOW RATE IN GPH

PERFORMANCE

WST40

TOTAL DYNAMIC HEAD (FT.)

SPT33

TOTAL DYNAMIC HEAD (FT.)

Model

• 1/2 HP pumps up to 2900 GPH @ 0’ (WST50) 4/10 HP pumps up to 2500 GPH @ 0’ (WST40) 3/10 HP pumps up to 2300 GPH @ 0’ (WST30) • Reinforced, corrosion-resistant thermoplastic submersible sump pump • Piggy-back tether float switch for automatic operation • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Easy carry handle for portability • High performance motor • 1½” NPT discharge and reinforced thermoplastic base • Designed for 14” diameter or larger sump basins • Approximate on level @ 14” - off level @ 7”

FLOW RATE IN GPH

THERMOPLASTIC WITH TETHER FLOAT SWITCH

SPT50

PERFORMANCE

WSF50

THERMOPLASTIC WITH TETHER FLOAT SWITCH

WARR

SPF33

SPF50

YEA

Model

Discharge Head

5’

10’

15’

20’

WSF50

1/2

Gallons/Hour

2700

2200

1400

400

WST50

1/2

Gallons/Hour

2700

2200

1400

400

WST40

4/10

Gallons/Hour

2250

1900

1200

250

WST30

3/10

Gallons/Hour

2100

1400

800

100

1000

2000

3000

4000

WSF50 WST50 WST40 WST30

5000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SUMP PUMPS YEA

THERMOPLASTIC WITH TETHER FLOAT SWITCH

2 WARR

WARR

YEA

submersible | pedestal

CAST IRON WITH VERTICAL FLOAT SWITCH

• 1/3 HP pumps up to 3060 GPH @ 5’ • Reinforced, corrosion-resistant thermoplastic submersible sump pump • Piggy-back tether float switch for automatic operation • Side suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • Stainless steel ring for portability • High performance 1/3 HP motor • 1½” NPT discharge and reinforced thermoplastic base • Designed for 14” diameter or larger sump basins • Approximate on level @ 14” - off level @ 7”

RSP130

• 1/2 HP pumps up to 5000 GPH @ 0’ (SPV800) 1/3 HP pumps up to 4080 GPH @ 0’ (SPV500) • Durable, cast iron pedestal sump pump • Adjustable vertical float switch allows for easy changes in operating cycle to fit application • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • High performance motor • Durable epoxy-coated steel column • 1½” NPT discharge and durable cast iron base • Will replace most submersible sumps without any plumbing changes • Designed for 14” diameter or larger sump basins

SPV500

WARR

SPV800

YEA

THERMOPLASTIC WITH VERTICAL FLOAT SWITCH • 1/2 HP pumps up to 4400 GPH @ 0’ (PTU50) 1/3 HP pumps up to 3200 GPH @ 0’ (PTU30) • Reinforced, corrosion-resistant thermoplastic pedestal sump pump • Adjustable vertical float switch allows for easy changes in operating cycle to fit application • Top suction design filters debris and minimizes clogging • Designed for easy installation without any plumbing changes • High performance motor • Corrosion resistant reinforced thermoplastic construction • 1½” NPT discharge and durable cast iron base • Will replace most submersible sumps without any plumbing changes • Designed for 14” diameter or larger sump basins

FLOW RATE IN GPH

Model

Discharge Head

0’

5’

10’

15’

RSP130

1/3

Gallons/Hour

3060

2820

2460

1500

20 15 10 5 0

1000

2000

3000

4000

5000

Model

Discharge Head

5’

10’

15’

20’

SPV800

1/2

Gallons/Hour

4500

3800

2900

1500

SPV500

1/3

Gallons/Hour

3180

2160

780

PTU50

1/2

Gallons/Hour

4200

3800

2900

1500

PTU30

1/3

Gallons/Hour

2800

2270

1640

530

PTU30

FLOW RATE IN GPH

PERFORMANCE

RSP130

PTU50

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

TOTAL DYNAMIC HEAD (FT.)

1000

2000

3000

4000

SPV800 SPV500 PTU50 PTU30

5000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

UTILITY PUMPS

answer guide

WHAT IS A UTILITY PUMP?

These portable pumps range in use from everyday applications around your home to occasional use. Some typical applications include removing standing water off basement floors or construction sites, draining aquariums and water beds, emptying basement window wells, and boosting water pressure to wash a car.

HOW DO I OPERATE MY UTILITY PUMP?

WHY USE A UTILITY PUMP?

Utility pumps can be a submersible or non-submersible design, and make water moving tasks around the home or farm easier. Electric utility pumps are perfect for everyday household use. Gasoline-powered pumps are designed for more portable farm and commercial uses.

HOW CAN A UTILITY PUMP WORK FOR YOU?

Electric utility pumps empty clogged sinks, drain flooded basements, bail boats, boost water pressure, and more. Gasoline-powered utility pumps work well for irrigation, construction, fire fighting and many other applications.

HOW MUCH HORSEPOWER (HP) DO YOU NEED?

In general, the more horsepower, the better. Pump performance depends on how high and how fast you want to pump the water.

COMMON UTILITY PUMP APPLICATIONS

GASOLINE-POWERED PUMPS APPLICATION HIGHLIGHTS: Place the pump close to the liquid being pumped. Attach suction hose and fitting tightly. Attach discharge hose. Suction lines must be a rigid pipe or reinforced hose. (See accessories section).

Add a check valve to the suction line to maintain the self priming capability. Use a suction strainer if you are pumping abrasive material. Keep all pipe and hose lines as short and straight as possible.

Removes standing water

Empties clogged sinks

Drains window wells or other problem areas

Fill the engine crankcase with the recommended grade of oil. Fill the engine fuel tank with the recommended grade of gasoline. Add water to the priming port on the pump, until itâ&#x20AC;&#x2122;s approximately 3 inches from the top.

SUBMERSIBLE UTILITY PUMPS APPLICATION HIGHLIGHTS: Pump should be located on a level solid foundation. Submerge in two inches of water to properly prime pump and keep pump inlet screen clear.

Attach discharge pipe into pump body. To utilize a garden hose, install the garden hose adapter provided with the pump. Run discharge pipe/hose away from the pump. Plug into the power source and turn pump on, once all connections are complete.

TRANSFER PUMPS APPLICATION HIGHLIGHTS: Pump should be located on a level solid foundation. Attach suction hose and discharge pipe into pump body.

To utilize a garden hose, install the garden hose adapter provided with the pump. Run discharge pipe/hose away from the pump. Plug into the power source and turn pump on, once all connections are complete.

Install the priming plug and start engine.

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

UTILITY PUMPS YEA

5.5 HP SEMI-TRASH PUMP • Pumps up to 16,800 GPH @ 0’ • Rugged, aluminum and cast iron, gasoline-powered water transfer utility pump • OHV 4-cycle honda engine passes up to 5/8" solids • 3” NPT suction/discharge for easy connection to standard discharge hose • Heavy-duty water transfer pump you can take anywhere • Heavy-duty aluminum roll cage and pump housing protect and provide stability • Passes up to 5/8" solids • 1 gallon gas reservoir • Cast iron pump casing and impeller

WARR

3 WARR

YEA

gasoline-powered

4 HP TRANSFER PUMP • Pumps up to 7200 GPH @ 0’ • Rugged, cast iron, gasoline-powered water transfer utility pump • 4-cycle high pressure pump passes 3/8" solids • 2" NPT suction/discharge for easy connection to standard discharge hose • Viton mechanical shaft seal for compatibility with most agricultural chemicals • Heavy-duty aluminum handle for portability • Passes up to 3/8” solids • Easy-priming outlet • 1 gallon gas reservoir • Cast iron volute and impeller

GPS400

FLOW RATE IN GPH

100

PERFORMANCE

Model

Discharge Head

0’

20’

40’

60’

GPS400

Gallons/Hour

7200

6600

5640

4080

TOTAL DYNAMIC HEAD (FT.)

3 WARR

4.0 HP SEMI-TRASH PUMP

YEA

GPH550 80 60 40

• Pumps up to 9600 GPH @ 0’ • Rugged, aluminum and cast iron, gasoline-powered water transfer utility pump • OHV 4-cycle honda engine passes up to 1/2" solids • 2” NPT suction/discharge for easy connection to standard discharge hose • Heavy-duty water transfer pump you can take anywhere • Heavy-duty aluminum roll cage and pump housing protect and provide stability • Passes up to 1/2” solids • 1 gallon gas reservoir • Cast iron pump casing and impeller

20 0

4000

6000

8000

10,000

GPH400

FLOW RATE IN GPH TOTAL DYNAMIC HEAD (FT.)

100

PERFORMANCE

Model

Discharge Head

0’

20’

40’

60’

GPH550

5.5

Gallons/Hour

16,800

14,440

12,000

9000

GPH400

Gallons/Hour

9600

9000

7800

5300

40 20 0

2000

GPS400

5000

10,000

15,000

20,000

GPH550 GPH400

25,000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

UTILITY PUMPS YEA

• i Switch™ sensing technology turns the pump on and off automatically with the presence of water • 1/4 HP pumps up to 3000 GPH @ 0’ • Energy efficient, high flow 1/4 HP oil-free motor • Corrosion-resistant, sealed thermoplastic construction for submersible use • 1¼” discharge with garden hose adapter included • Bottom suction design filters debris and removes water down to 3/8” of surface • Designed to perform in applications such as draining flooded basements, emptying water filled boats and removing water from sinks, stock tanks, and flat roofs • 1/4 HP motor rated 2.5 Amps

YEA

YEA YEA

GFU110

0’

5’

FLOW RATE IN GPH

10’

15’

EEAUP250

1/4

Gallons/Hour

3000

2600

1850

900

RUP160

1/6

Gallons/Hour

3000

2600

1850

900

VIP50

1/2

Gallons/Hour

2500

2040

1550

800

VIP25

1/4

Gallons/Hour

1800

1320

1020

500

VIP15

1/5

Gallons/Hour

1700

1200

780

300

1000

1500

2000

2500

3000

EEAUP250 RUP160

PERFORMANCE

Model

Discharge Head

0’

5’

10’

15’

TSC130

1/4

Gallons/Hour

1050

900

860

730

VIP25

TSC160

1/6

Gallons/Hour

950

825

790

660

VIP15

Model

Discharge Head

0’

2’

4’

6’

GFU110

1/10

Gallons/Hour

660

540

420

300

VIP50

FLOW RATE IN GPH

TOTAL DYNAMIC HEAD (FT.)

Discharge Head

WARR

VIP15 TOTAL DYNAMIC HEAD (FT.)

• 1/2 HP pumps up to 2500 GPH @ 0’ (VIP50) 1/4 HP pumps up to 1800 GPH @ 0’ (VIP25) 1/5 HP pumps up to 1700 GPH @ 0’ (VIP15) • Corrosion-resistant, reinforced thermoplastic motor housing, volute, and impeller • Bottom suction design filters debris and removes water down to 1/8" of surface • Passes up to 1/2” solids • 1¼” NPS high volume discharge with 3/4" garden hose adapter • Easy-access handle for portability

PERFORMANCE Model

• Pumps up to 660 GPH @ 0’ • Oil-free reinforced thermoplastic submersible utility pump • Corrosion-resistant thermoplastic motor housing, volute, and impeller • Bottom suction design removes water down to 1/8” of surface • 3/4” garden hose thread • Oil-free design protects aquatic life • Easy-access handle for complete portability • Ideal for draining aquariums, clogged sinks, or removing standing water

VIP25

TSC160

THERMOPLASTIC NON-CLOGGING VORTEX PUMP

VIP50

TSC130

OIL-FREE MULTI-PURPOSE PUMP

RUP160

WARR

• 1/4 HP pumps up to 1050 GPH @ 0’ (TSC130) 1/6 HP pumps up to 950 GPH @ 0’ (TSC160) • Reinforced thermoplastic submersible utility pump • Corrosion-resistant, reinforced thermoplastic motor housing, volute and impeller • Bottom suction design removes water down to within 1/8” of surface • 3/4” bronze discharge adapter connects to standard garden hose (TSC130) 3/4” plastic discharge adapter connects to standard garden hose (TSC160) • Top center 3/4” discharge design provides balanced installation • Stainless steel ring handle for easy portability

• 1/6 HP pumps up to 3000 GPH @ 0’ • Reinforced thermoplastic oil-free submersible utility pump • Corrosion-resistant thermoplastic housing, volute, and impeller • Bottom suction design filters and removes water down to 3/8" of surface • 1¼” NPS discharge with 3/4" garden hose adapter included • Oil-free design protects aquatic life • Designed to perform in applications such as draining flooded basements, emptying water filled boats and removing water from sinks, stock tanks, and flat roofs R

HEAVY-DUTY SUBMERSIBLE PUMP

WARR

THERMOPLASTIC OIL-FREE SUBMERSIBLE PUMP

WARR

EEAUP250

ENERGY EFFICIENT, AUTO ON/OFF WATER REMOVAL PORTABLE PUMP

WARR

YEA

submersible

250

500

1000

1500

TSC130 TSC160 GFU110

2000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

UTILITY PUMPS

transfer | condensate A

WARR

CONDENSATE PUMP

• 1/2 HP pumps up to 1450 GPH @ 0’ (40 PSI) • Boosts line pressure up to 40 PSI • Rugged, cast iron pump housing and motor for durability easy-priming outlet • Portable transfer pump you can take anywhere • 3/4” brass hose adapters connect to standard garden hose • Applications include drainage, dewatering flooded basements, emptying stock tanks, draining cooled water heaters, and charging polyglycol radiant heating lines •P C4K kit includes: 1/2 HP cast iron transfer pump, reinforced thermoplastic storage case, suction strainer, and (2) 3/4” brass hose adapters

WARR

YEA

CAST IRON TRANSFER PUMP

• Pumps up to 85 GPH @ 0’ • Reinforced, corrosion-resistant, thermoplastic condensate pump • Transfers condensation from air conditioners and HVAC systems to a nearby drain • 3/8" discharge with built-in check valve • Safety switch shuts off during power failures • Designed for easy installation in new or existing applications • 2-quart reinforced thermoplastic reservoir

PERFORMANCE Discharge Pressure Per Square Inch

PC4

PC4K

PSI

0’

5’

10’

15’ 1270

1450

1420

1350

1370

1300

1230

1160

1250

1190

1120

1040

1140

1070

1000

930

1020

950

880

810

890

820

750

570

750

680

620

550

610

540

480

410

YEA

• D rains clogged sinks, aquariums, flooded areas, flooded boats, stopped clothes washers, and car oil pans

PC2

DPFTK1

• Pumps up to 350 GPH @ 0’ •3 /4” chrome-plated bronze suction/discharge for easy connection to standard garden hose •R emoves water down to 1/8” of surface when water suction attachment is connected • Easy connection to 12 volt battery with convenient on/off switch • Alligator clamps connect to battery • Includes 6’ suction hose, water suction attachment, and replacement parts kit. FLOW RATE IN GPH

Model

Discharge Head

0’

10’

20’

30’

40’

PC2

Gallons/Hour

340

300

225

PC1

Gallons/Hour

350

310

250

150

20 10 0

100

200

300

400

500

PC2 PC1

FLOW RATE IN GPH

PERFORMANCE Model

Discharge Head

0’

5’

10’

15’

20’

WCP85

Gallons/Hour

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

TOTAL DYNAMIC HEAD (FT.)

WDP21S

DRILL POWERED FLUID TRANSFER PUMP KIT

12 VOLT TRANSFER PUMP

PC1

• Pumps up to 150 GPH • Durable, corrosion-resistant stainless steel shaft • Compatible with any electric drill • Effectively empties clogged sinks and washing machines, drains aquariums, tanks, and more

WARR

DRILL PUMP

• Pumps up to 340 GPH @ 0’ •3 /4” chrome-plated bronze suction/discharge for easy connection to standard garden hose • Removes water down to 1/8” of surface when water suction attachment is connected • Portable and lightweight transfer pump you can take anywhere • Includes 6’ suction hose, water suction attachment, and replacement parts kit.

115 VOLT TRANSFER PUMP

WCP85

Suction Lift Gallons Per Hour - in feet

30 20 10 5 0

100

WCP85

125

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SEWAGE PUMPS

answer guide

WHAT IS A SEWAGE PUMP?

HOW DO I INSTALL MY NEW SEWAGE PUMP?

Sewage pumps are automatic pumps used when water being pumped contains solids up to 2” in diameter. Pumping waste from a bathroom to a sewer or septic line is a common application.

INSTALLATION HIGHLIGHTS: Thread the discharge pipe into the discharge connection. Attach the check valve at a 45° angle with the valve pivot on top.

HOW DO YOU PLAN TO USE THE PUMP?

Drill a 1/16” vent hole in the discharge pipe approximately 1” to 2” above the pump discharge to prevent air locking in the initial start-up, which will result in loss of prime.

If you are planning to pump household sewage to a septic system or sewage line, you’ll need a sewage pump. Sewage pumps can also be used for pumping effluent, grey-water and groundwater.

Install a gate valve, after the check valve. Install a union between the pump and the check valve. It is important to keep the impeller submerged. Set the length of the tether switch to turn the pump off with 4“ of fluid still in the sewage basin. Connect the appropriate power once all connections are complete.

WHERE DO YOU NEED TO USE THE PUMP?

Sewage ejector pumps are designed to accommodate single-family homes, multiple-family homes and small commercial applications.

TOOLS NEEDED: Drill, screwdriver, pipe wrench, adjustable wrench, hacksaw, knife, and pipe clamps.

HOW MUCH HORSEPOWER (HP) DO YOU NEED?

Generally, the amount of horsepower needed depends on the discharge rate you require from the sewage pump system. Check the pump performance charts on the next few pages.

SEWAGE PUMP INSTALLATION 2” Discharge Pipe

Upper Level Drainage Vent Pipe

Main Waste Line To Sewer or Septic Tank

Cleanout

GFCI Protected Outlet

Union Vent Pipe

Shower

Vent Pipe Dryer

45˚ Elbow

Washer

Washer Drain Laundry Tub

Lavatory

Toilet

2” Check Valve 45˚ Elbow Floor Drain Approximate on level @ 19”

Shower Drain

Inlet Pipe

Approximate off level @ 9” Min. 18”

For tether switch models

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SEWAGE PUMPS

SEP5

YEA

• 3/4 HP pumps up to 8800 GPH @ 0’ (DSP75) 6/10 HP pumps up to 8200 GPH @ 0’ (DSP60) • Durable, cast iron submersible sewage pump • Manual operation (control box or pump switch sold separately, see accessories section) • 2” NPT discharge capable of handling 2” solids • Designed for easy installation without any plumbing changes • Lower ball bearings for quiet long life • Designed for residential and light commercial sewage applications • Ideal for basement or below grade installations • 120 volt switches sold separately, see sewage accessory section • Designed for 18” diameter or larger sewage basins ®

DSP60

YEA

DSP75

• 1/2 HP pumps up to 6900 GPH @ 15’ • Commercial-grade cast iron submersible sewage pump • Manual operation (control box or pump switch sold separately, see accessories section) • 3” NPT discharge with 2” adapter capable of handling 2” solids • Designed for easy installation without any plumbing changes • Upper and lower ball bearings for quiet operation • 10 ft. power cord is oil and water resistant with neoprene grommet for superior seal • 120 volt switches sold separately, see sewage accessory section • Designed for 18” diameter or larger sewage basins

• 1/2 HP pumps up to 7680 GPH @ 0’ • Durable, cast iron submersible sewage pump • Piggy-back tether float switch with automatic operation • 2” NPT discharge capable of handling 2” solids • Designed for easy installation without any plumbing changes • Lower ball bearings for quiet operation • Designed for residential and light commercial sewage applications • Ideal for basement or below grade installations • Designed for 18” diameter or larger sewage basins

CSE50TE

SEP4 FLOW RATE IN GPH

Model

Volts

Discharge Head

10’

15’

20’

25’

SEP8

240

Gallons/Hour

13,800

12,000

9900

SEP6

240

Gallons/Hour

12,900

11,100

9000

7020

SEP5

3/4

240

Gallons/Hour

10,800

9000

6600

3900

SEP4

1/2

120

Gallons/Hour

9300

6900

3900

3000

6000

9000

12,000

15,000

SEP8

PERFORMANCE

Model

Volts

Discharge Head

5’

10’

15’

DSP75

3/4

120

Gallons/Hour

8700

7020

4680

SEP5

DSP60

6/10

120

Gallons/Hour

7500

6600

4500

SEP4

CSE50TE

1/2

120

Gallons/Hour

6780

5280

2400

SEP6

FLOW RATE IN GPH

TOTAL DYNAMIC HEAD (FT.)

3 WARR

CAST IRON SEWAGE PUMP WITH PIGGY-BACK TETHER SWITCH

120 VOLT CAST IRON COMMERCIAL PUMP

PERFORMANCE

WARR

CAST IRON SEWAGE PUMP

YEA

SEP6

• 2 HP pumps up to 13,800 GPH @ 15’ (SEP8) 1 HP pumps up to 11,100 GPH @ 15’ (SEP6) 3/4 HP pumps up to 9000 GPH @ 15’ (SEP5) • Commercial-grade cast iron submersible sewage pump • Manual operation (control box or pump switch sold separately, see accessories section) • 3” NPT discharge with 2” adapter capable of handling 2” solids • Designed for easy installation without any plumbing changes • Upper and lower ball bearings for quiet operation • 20 ft. power cord is oil and water resistant with neoprene grommet for superior seal • Power cord on SEP5, SEP6 and SEP8 supplied without plug for hard-wired service • 240 volt switches sold separately, see sewage accessory section • Designed for 18” diameter or larger sewage basins

3 WARR

240 VOLT CAST IRON COMMERCIAL PUMP

SEP8

WARR

YEA

commercial | residential

2000

4000

6000

8000

DSP75 DSP60 CSE50TE

10,000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SEWAGE PUMPS 1

WARR

YEA

WARR

YEA

residential | systems

CAST IRON SEWAGE EJECTOR SYSTEM

CAST IRON WITH TETHER SWITCH

• 6/10 HP pumps up to 8200 GPH @ 0’ • Durable, cast iron submersible sewage pump • Manual operation (Control box or pump switch sold separately) • 2” NPT discharge capable of handling 2” solids • Easy carry ring for portability • Lower ball bearings for quiet operation and long life • 18” x 30” sewage basin • Job ready for easy installation

• 1/2 HP pumps up to 5700 GPH @ 0’ • Durable, cast iron submersible sewage pump • Piggy-back tether float switch for automatic or manual operation • 2” NPT discharge capable of handling 2” solids • Designed for easy installation without any plumbing changes • Easy carry ring for portability • Lower ball bearings for quiet operation • Ideal for basement or below grade installations • Designed for 18” diameter or larger sewage basins

A ®

SYDSP60

• 1/2 HP pumps up to 7800 GPH @ 0’ (SEL50) 4/10 HP pumps up to 5800 GPH @ 0’ (SEL40) • Reinforced, corrosion-resistant, thermoplastic submersible sewage pump • Piggy-back tether float switch for automatic operation •C ombination 2”/3” NPT discharge capable of handling u p to 2” solids • Designed for easy installation without any plumbing changes • Easy carry handle for portability • Cast iron seal plate • Lower ball bearings for quiet operation • Designed for 18” diameter or larger sewage basins

SEL50

SEL40

FLOW RATE IN GPH

Model

Discharge Head

0’

5’

10’

15’

RPP50

1/2

Gallons/Hour

5700

4560

3240

900

SEL50

1/2

Gallons/Hour

7800

7200

6420

4200

SEL40

4/10

Gallons/Hour

5800

5400

3700

1350

5 0

2000

4000

6000

8000

10,000

SEL50 SEL40 RPP50

FLOW RATE IN GPH

PERFORMANCE Model

Discharge Head

0’

5’

10’

15’

SYDSP60

6/10

Gallons/Hour

8200

7500

6000

4000

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

WARR

THERMOPLASTIC SEWAGE PUMP WITH TETHER FLOAT SWITCH

YEA

RPP50T

20 15 10 5 0

2000

4000

6000

8000

SYDSP60

10,000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SEWAGE PUMPS A

WARR

CAST IRON EFFLUENT PUMP WITH TETHER SWITCH

CORROSION-RESISTANT THERMOPLASTIC SEWAGE EJECTOR SYSTEM

• 1/3 HP pumps up to 3900 GPH @ 0’ • Durable, cast iron submersible effluent pump • Piggy-back tether float switch for automatic or manual operation • 2” NPT discharge capable of handling up to 3/4” solids • Designed for easy installation without any plumbing changes • Easy carry ring for portability • Upper ball bearings for quiet operation • Designed for domestic septic tank and gray water applications • Designed for 18” diameter or larger basins

YEA

• 4/10 HP pumps up to 5800 GPH @ 0’ • Reinforced, corrosion-resistant, thermoplastic submersible sewage pump • Piggy-back tether float switch for automatic or manual operation • Combination 2”/3” NPT discharge capable of handling u p to 2” solids • Cast iron seal plate • Lower ball bearings for quiet operation • 18” x 30” sewage basin • 2” vent opening in cover (unassembled) • Job ready for easy installation WARR A

EFL30

• 4/10 HP pumps up to 5800 GPH @ 0’ • Reinforced, corrosion-resistant, thermoplastic submersible sewage pump • Piggy-back tether float switch for automatic or manual operation •C ombination 2”/3” NPT discharge capable of handling u p to 2” solids • Cast iron seal plate • Lower ball bearings for quiet operation • 18” x 30” sewage basin • 3” vent opening in cover (preassembled) • Job ready for easy installation

Discharge Head

0’

5’

10’

15’

SYSSEL40

4/10

Gallons/Hour

5800

5400

3700

1350

SYSEL40

4/10

Gallons/Hour

5800

5400

3700

1350

10 5 0

2000

4000

6000

8000

10,000

SYSSEL40 SYSEL40

FLOW RATE IN GPH

PERFORMANCE

TOTAL DYNAMIC HEAD (FT.)

Model

EFL33

FLOW RATE IN GPH TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

• 1/3 HP pumps up to 5700 GPH @ 0’ • Reinforced, corrosion-resistant, thermoplastic submersible effluent pump • Piggy-back tether float switch for automatic or manual operation • Combination 2”/3” NPT discharge capable of handling 3/4” solids • Designed for easy installation without any plumbing changes • Easy carry handle for portability • Cast iron seal plate • Lower ball bearings for quiet operation • Designed for domestic septic tank and gray water applications • Designed for 18” diameter or larger basins

SYSEL40

WARR

CORROSION-RESISTANT THERMOPLASTIC SEWAGE EJECTOR SYSTEM

THERMOPLASTIC EFFLUENT PUMP WITH TETHER FLOAT SWITCH

SYSSEL40

YEA

WARR

YEA

systems | effluent

Model

Discharge Head

0’

5’

10’

15’

EFL30

1/3

Gallons/Hour

3900

3480

2900

2280

EFL33

1/3

Gallons/Hour

5700

5300

3600

1300

10 5 0

1500

3000

4500

6000

EFL33 EFL30

7500

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

WELL PUMPS

answer guide

WHAT IS A WELL PUMP?

Well pumps are used to deliver water from an underground water source to your home. We offer three types of well pumps: shallow well jet pumps, convertible well jet pumps, and deep well submersible pumps. Shallow well jet and convertible well jet pumps are NOT submersible and are usually placed outside the well in a well housing. Deep well submersible pumps are submerged inside your well.

WHICH TYPE OF WELL PUMP DO YOU NEED?

HOW DEEP IS YOUR WELL?

Shallow well jet pumps can pump water from 0’ to 25’ deep. Convertible well jet pumps pump water from 0’ to 90’ deep. A convertible well jet pump can operate between 0’ to 25’ with a shallow jet well nozzle or between 25’ to 90’ deep with an ejector assembly. Deep well submersible pumps attach to the bottom of the drop pipe and can operate in wells from 20’ up to 300’ deep.

SHALLOW WELL JET PUMP Shallow Jet Well Nozzle

2” Ejector Assembly

• Wells less than 25’ deep • Overload protected to prevent motor burnout • Durable cast iron construction

4” Ejector Assembly

WHAT IS THE DIAMETER OF YOUR WELL CASING?

The diameter of your well casing determines what type of well pump you need. If you do not have a well casing, you have a Shallow Well. Some well casings are 2” and require special accessories with a convertible jet well pump. If your well casing is 4” or more in diameter, you can use either a jet well pump or deep well submersible pump, depending on the depth of your well.

Well Depth

Recommended Pumps

Well Casing Diameter

Required Ejector Assembly

0’ - 25’

Shallow Well Jet Pump Convertible Well Jet Pump Deep Well Submersible

N/A N/A Minimum 4”

None Shallow Well Nozzle None

25’ - 90’

Convertible Well Jet Pump Convertible Well Jet Pump Deep Well Submersible

2” 4” Minimum 4”

2” Diameter 25’ - 90’ Deep 4” Diameter 25’ - 90’ Deep None

Deep Well Submersible

Minimum 4”

None

90’ - 300’

HOW MUCH HORSEPOWER (HP) DO YOU NEED?

If you’re replacing a well pump, and your water needs haven‘t changed, select a pump with the same horsepower and voltage. You may need more horsepower if you’ve added a household member or a major appliance since installing your current pump. Larger pumps may also require larger pressure tanks to prevent rapid cycling.

WHAT IS THE DIFFERENCE BETWEEN A 2-WIRE AND 3-WIRE PUMP? Deepwell submersible pumps are classified by the number of wires connected to the pump’s motor. 2-Wire (plus ground) pumps do not require the use of a control box. For 3-wire pumps (plus ground), the start capacitor is located away from pump above ground, and therefore requires the use of a control box. WAYNE has three control box models available. NOTE: Make sure the Control Box is compatible with your pump.

CONVERTIBLE WELL JET PUMP • Wells up to 90’ deep • Overload protected to prevent motor burnout • Durable cast iron construction

DEEP WELL SUBMERSIBLE PUMP • Wells from 20’ - 300’ deep • Overload protected to prevent motor burnout • Durable stainless steel construction

HOW DO I INSTALL MY NEW WELL PUMP? Proper installation is critical to a safe and long-lasting well pump system. Be sure that you follow the complete installation instructions included with your new well pump. Make sure the water sources and piping are clear of sand and other debris that could clog the pump. To prevent unnecessary wear, be sure to protect the pump from freezing and never run the pump dry. INSTALLATION HIGHLIGHTS: Bolt the unit to a level place on the floor or onto the mounting bracket on your tank. Connect all piping to the well. A shallow well jet pump will have one pipe running between the pump and the water supply. This pipe ends with a foot valve in the well and will keep water in the pipe once the system has been primed.

After the well pipes are attached to the pump, connect the pipe between the pump discharge and the tank. Connect the appropriate power to the jet pump once all piping connections are complete. Follow the instruction manual guidelines to prime the pump. TOOLS & ACCESSORIES NEEDED:

Pressure gauge, foot valve, screwdriver, pipe wrench, adjustable wrench, wire cutters, wire strippers, hacksaw, knife, and pipe clamps.

INSTALLATION HIGHLIGHTS: Bolt the unit to a level place on the floor or onto the mounting bracket on your tank. Connect all piping to the well. The convertible well jet pump has one pipe running between the pump and the water supply (the suction pipe), and an additional pipe between the pump and the ejector assembly (the drive pipe). This additional pipe helps the pump draw water from wells up to 90 feet deep.

A foot valve is also required in the well to maintain prime in the well pipe. After the well pipes are attached to the pump, connect the pipe between the pump discharge and the tank. Connect the appropriate power to the jet pump once all piping connections are complete. Follow the instruction manual guidelines to prime the pump. TOOLS & ACCESSORIES NEEDED:

Pressure gauge, screwdriver, pipe wrench, adjustable wrench, wire cutters, wire strippers, hacksaw, knife, and pipe clamps.

INSTALLATION HIGHLIGHTS: Connect the appropriate wiring to the pump using a splice kit. Attach the pump to the discharge pipe. Attach a safety rope to pump and begin lowering into the well. Connect additional pipe as needed while lowering the unit into the well casing until the pump is positioned 10 to 20 feet below the water level. Add a well cap to support the pipe and prevent well contamination. Lastly, connect the wiring from the pump to the pressure switch and control panel. TOOLS NEEDED:

Hacksaw, screwdriver, pliers, hammer, (2) pipe wrenches, adjustable wrench, wire cutters, wire strippers, propane torch, plastic tape, knife, cord/rope/ fishing line, small weight, tripod, pipe clamps, block and tackle for pulling and lowering heavier pump and piping into ground.

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

WELL PUMPS YEA

CWS75

CWS50

JSU50

SWS75

SWS50

JSU50

3/4

1/2

WARR

• 1/2 HP pumps up to 278 GPH @ 5’ (50 PSI) • For wells 0’ - 90’ in depth • Dual voltage (120/240) high efficiency square flange motor (Factory wired for 120 volts) • 3/4” NPT discharge with 1¼” NPT suction, and 1" drive • Pressure switch is pre-set at 30-50 PSI for automatic operation • Dedicated priming port for volute filling • Durable cast iron volute

SWS100

• 1 HP pumps up to 528 GPH @ 5’ Depth - (50 PSI) (CWS100) 3/4 HP pumps up to 408 GPH @ 5’ Depth - (50 PSI) (CWS75) 1/2 HP pumps up to 348 GPH @ 5’ Depth - (50 PSI) (CWS50) • For wells 0’ - 90’ in depth • Dual voltage (120/240) high efficiency square flange motor (Factory wired for 120 volts) • Pressure switch is pre-set at 30-50 PSI for automatic operation • 3/4” NPT discharge with 1¼” NPT suction, and 1" drive • Dedicated priming port for volute filling • Durable cast iron volute

CAST IRON CONVERTIBLE WELL JET PUMP

JCU50

PERFORMANCE

PERFORMANCE Model

CAST IRON CONVERTIBLE WELL JET PUMPS

• 1/2 HP pumps up to 288 GPH @ 5’ Depth - (50 PSI) • For wells 0’ - 25’ in depth • Dual voltage (120/240) high efficiency square flange motor (Factory wired for 120 volts) • 3/4” NPT discharge with 1¼” suction • Pressure switch is pre-set at 30-50 PSI for automatic operation • Dedicated priming port for volute filling • Durable cast iron volute

WARR

CAST IRON SHALLOW WELL JET PUMP

CWS100

YEA

SWS50

YEA

• 1 HP pumps up to 558 GPH @ 5’ Depth - (50 PSI) (SWS100) 3/4 HP pumps up to 468 GPH @ 5’ Depth - (50 PSI) (SWS75) 1/2 HP pumps up to 384 GPH @ 5’ Depth - (50 PSI) (SWS50) • For wells 0’ - 25’ in depth • Dual voltage (120/240) high efficiency square flange motor (Factory wired for 120 volts) • 3/4” NPT discharge with 1¼” suction • Pressure switch is pre-set at 30-50 PSI for automatic operation • Dedicated priming port for volute filling • Durable cast iron volute

WARR

SWS75

CAST IRON SHALLOW WELL JET PUMPS TY

SWS100

WARR

YEA

shallow well | convertible well

PSI

0’

10’

20’

30’

40’

50’

60’

70’

80’

90’

1056

948

846

750

642

516

384

294

234

180

840

750

642

528

384

294

234

180

126

300

588

444

330

264

234

180

126

990

906

774

630

510

408

306

246

186

780

630

510

408

306

246

186

114

462

330

270

216

156

900

780

690

570

456

348

270

180

660

570

450

348

270

180

PSI

0’

5’

10’

15’

20’

25’

990

960

930

900

870

810

840

810

780

720

690

618

630

558

510

450

372

Model CWS100

HP 1

840

810

792

768

732

690

720

690

660

624

570

510

468

420

372

306

240

750

720

672

630

600

570

600

570

528

492

450

408

420

384

348

300

240

180

408

300

210

150

684

654

624

588

552

522

790

680

590

480

380

280

180

522

492

438

402

354

312

560

460

360

260

160

324

288

252

210

162

108

325

230

130

CWS75

CWS50

JCU50

3/4

1/2

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

WELL PUMPS A

DEEP WELL SUBMERSIBLE PUMP

PRECHARGED AIR TANK SYSTEMS

• 1 HP pumps up to 541 GPH @ 100’ (50 PSI) (T100S 10-2) 3/4 HP pumps up to 535 GPH @ 100’ (50 PSI) (T75S 10-2 / T75S 10-4) 1/2 HP pumps up to 165 GPH @ 100’ (50 PSI) (T50S 10-2 / T50S 10-4 / T51S 10-4) • Corrosion-resistant stainless steel motor enclosure, pump shell, and fasteners • Heavy-duty, reinforced thermoplastic impellers, diffusers, intake screen, and check valve • High efficiency, hermetically sealed motor is thermally protected to prevent overheating • 1¼” NPT discharge • Submersible design eliminates the need for priming and creates quiet operation

WAYNE’s precharged air tank systems are highly reliable and capable of maintaining a water supply equal to conventional tanks twice their size. All tanks include premium grade bladders or diaphragms, which eliminate the problem of water-logged tanks.

T100S 10-2

T75S 10-4

T75S 10-2

T51S 10-4

T50S 10-4

T50S 10-2

Model

Part No.

Description

SWS50 - WX102

56909

1/2 HP shallow well system with 4.4 gallon Well-X-Trol tank

SWS50 - 30PCA

56912

1/2 HP shallow well system with 30 gallon precharged tank

SWS50 - 8.5FX

59501-WYN1

1/2 HP shallow well system with 8.5 gallon precharged tank

JSU50 - 8.5FX

58010-WYN1

1/2 HP shallow well system with 8.5 gallon precharged tank

JSU50 - WX102

58012-WYN1

1/2 HP shallow well system with 4.4 gallon Well-X-Trol tank

JSU50 - 30PCA

58013-WYN1

1/2 HP shallow well system with 30 gallon precharged tank

CONVENTIONAL AIR TANK SYSTEMS At home, at the lake, or on the farm, WAYNE’s standard tank pump systems provide dependable, low cost performance. They’re easy to install and feature epoxy coating for superior corrosion resistance. Systems include a pump, pressure switch, air volume control, and tubing.

DROP CABLE SELECTION CHART Cable Size & Length (Feet) Model

Type

Volts

T100S 10-2

3 - Wire

240

248

392

617

T75S 10-4

3/4

2 - Wire

240

293

473

740

T75S 10-2

3/4

3 - Wire

240

293

473

740

T51S 10-4

1/2

2 - Wire

120

404

641

1003

T50S 10-4

1/2

2 - Wire

240

404

641

1003

T50S 10-2

1/2

3 - Wire

240

404

641

1003

Part No.

Description

56910

1/2 HP shallow well system with 12 gallon horizontal tank

56911

1/2 HP shallow well system with 30 gallon horizontal tank

JSU50 - 12P

58011-WYN1

1/2 HP shallow well system with 12 gallon horizontal tank

JSU50 - 30P

58014-WYN1

1/2 HP shallow well system with 30 gallon horizontal tank

WARR

YEA

SWS50 - 12P SWS50 - 30P

IMPORTANT! If required length falls between two wire sizes, use larger of two sizes (smaller number). CAUTION! Use of wire sizes smaller than determined WILL VOID WARRANTY.

Model

YEA

WARR

YEA

deep well submersible | well pump systems

PERFORMANCE WELL DEPTH HP 1

3/4

1/2

PSI

20’

40’

60’

80’

100’

120’

140’

175’

200’

225’

250’

275’

731

696

660

624

586

547

506

427

365

296

220

136

690

655

618

580

541

499

455

370

302

226

143

649

612

574

535

493

448

400

307

232

149

813

770

724

672

614

547

468

299

148

763

716

664

604

535

455

362

160

708

655

594

524

442

346

234

702

631

549

451

332

190

619

535

434

312

165

520

416

291

140

SWS-WX102

JSU-8.5FX

SWS-30P

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

LAWN PUMPS

answer guide

WHAT IS A LAWN PUMP?

Lawn pumps are used when a lake, pond, or municipal water is pumped for irrigation. Pumping water from a lake to power lawn or garden sprinklers is the most common application.

HOW DO I OPERATE MY LAWN PUMP?

HOW CAN A LAWN PUMP HELP?

Lawn pumps are effective because they operate more than one sprinkler head at a time, and also boost total system pressure.

WHAT TYPE OF LAWN PUMP DO I NEED?

The type of lawn pump you need depends on the number of sprinklers you will run, and the length and size of pipe used in your systems.

HOW IS WAYNE BETTER THAN OTHER LAWN SPRINKLING PUMPS? Our quality is the difference. Our cast iron or stainless steel pump casings provide rugged durability and resist corrosion. Benefit from it with WAYNE’S superior performance - lift water as high as 25 feet and discharge at pressures from 35 to 50 psi.

HOW MUCH HORSEPOWER (HP) DO I NEED?

PORTABLE LAWN PUMPS

That depends on the discharge pressure, suction lift, and flow rate you require.

APPLICATION HIGHLIGHTS: Pump should be located on a level solid foundation. Attach suction hose. Attach discharge pipe/garden hose into pump body.

WHAT SIZE WIRE DO I NEED FOR PERMANENT INSTALLATION? Model

Voltage

WLS200

WLS150

Maximum Wire Length Using AWG Size 14

240

170

270

430

700

1½

120/240

40/210

80/340

130/550

220/880

WLS100

120/240

60/280

110/440

170/710

280/1100

WLS75

3/4

120/240

60/280

110/440

170/710

280/1100

Run discharge pipe/hose away from the pump. Plug into the power source, and turn pump on once all connections are complete.

PERMANENT LAWN PUMPS APPLICATION HIGHLIGHTS: Protect pump from the elements by installing in a basement, garage, tool shed or pump house. Install the pump so the center line of the pump is as close as possible to the water level. Keep installation area clear to provide access for service and maintenance.

Protect the pump against flooding and excess moisture. Make sure the pump has adequate ventilation. The surrounding temperature should not exceed 100˚F (38˚C) or nuisance tripping of the motor may occur. TOOLS & ACCESSORIES NEEDED

Foot valve, screwdriver, pipe wrench, adjustable wrench, hacksaw, wire cutters, wire strippers, knife and pipe clamps.

PERMANENT LAWN SPRINKLING INSTALLATION Discharge Pipe Boost Municipal Application

Well Point Application Check Valve

Pond or Lake Application Inlet Pipe Low Water Level

Min. 2” Under Low Watermark

Foot Valve Min. 1” Off Bottom

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

LAWN PUMPS

POOL PUMPS

portable | permanent

answer guide | in and above ground

Pool pumps are used to circulate water as part of a swimming pool water filtration system. A

WARR

YEA

WHAT IS A POOL PUMP? PORTABLE STAINLESS STEEL SPRINKLING PUMP

HOW MUCH HORSEPOWER (HP) DO I NEED?

• 1 HP pumps up to 720 GPH @ 0’ • Portable, Stainless steel • Fan-cooled, continuous-duty 115-volt motor draws water up to 20' •1 ” NPT suction and discharge threads, 3/4” garden hose adapter included • Safe and convenient on/off switch • 180' of total dynamic head • Maintains pressure up to 80 PSI • Easy carry handle for portability

HOW DO I INSTALL MY NEW POOL PUMP?

The necessary HP for your pool pump depends on the size of your pool. When in doubt about the size of your replacement pump, match HP with the previous model.

PLS100 FLOW RATE IN GPH

Model

Discharge Head

0’

5’

10’

15’

PLS100

Gallons/Hour

720

630

520

390

TOTAL DYNAMIC HEAD (FT.)

200

PERFORMANCE

160 120 80 40

200

400

600

Width (ft.)

Diameter (ft.)

Average Depth of Pool (ft.)

7.5

5.9

Total Capacity of Pool in Gallons

HOW DO I INSTALL MY NEW POOL PUMP? INSTALLATION HIGHLIGHTS: Pool pumps are self-priming. Mount pump below water level for easy priming. If the pump must be located above the filled water level, keep the vertical distance to a minimum. Keep the piping as straight and short as possible. Slope horizontal runs upward to the pump to prevent trapping air.

Use independent piping supports to alleviate strain on the pump. Install valves and unions in the pump suction and return lines to facilitate servicing. Add a check valve in the suction pipe for in-ground pumps at or below the water level and keep it fully open during operation. Plug into power source once all connections are complete. TOOLS NEEDED: Screwdriver, pipe wrench, adjustable wrench, hacksaw, knife and pipe clamps

A R

WARR

Model

Suction Lift

5’

10’

15’

20’

25’

WLS200

Gallons/Hour

3400

3300

2900

2600

2100

WLS150

1½

Gallons/Hour

2900

2700

2400

2100

1700

WLS100

Gallons/Hour

2200

1800

1600

1000

WLS75

3/4

Gallons/Hour

1750

1500

1250

900

WLS200

WLS150

WLS100

WLS75

IN AND ABOVE GROUND POOL PUMP

WIP150

PERFORMANCE @ 30 PSI

Diameter (ft.)

WARR

CIRCULAR POOLS

Length (ft.)

• 2 HP pumps up to 3400 @ 5’ (30 PSI) (WLS200) 1½ HP pumps up to 2900 @ 5’ (30 PSI) (WLS150) 1 HP pumps up to 2200 @ 5’ (30 PSI) (WLS100) 3/4 HP pumps up to 1750 @ 5’ (30 PSI) (WLS75) • All motors are factory wired 240V. The 3/4, 1 and 1½ HP models include a dual voltage option. • 2” NPT suction with 1½ ” NPT discharge for maximum water flow • Designed to operate underground sprinkling systems, draw water from wells, lakes, or ponds for watering, pool filling, or any other applications where high water volume is needed

1000

RECTANGULAR POOLS

YEA

CAST IRON SPRINKLING PUMP

800

HOW DO I DETERMINE THE GALLON SIZE OF MY POOL?

YEA

PLS100

Pool pumps should be placed on a solid, level surface as close to a pool as possible, while complying with NEC and local codes. When installing a pool pump, locate the pump in a dry, well ventilated area away from direct sunlight. Water should never come in contact with the pump motor.

• 1 ½ HP pumps up to 41,000 gallons (WIP150) 1 HP pumps up to 27,000 gallons (WIP100) • Reinforced, corrosion-resistant, thermoplastic pool pump • Self-priming, high efficiency dual voltage motor (120/240) factory wired for 240-volts • Large capacity strainer with clear view lid for quick cleaning • Standard 1-1/2" NPT suction/discharge for easy installation

WIP100

WIP100 - 1 HP TURNOVERS / DAY

WIP150 - 1½ HP TURNOVERS / DAY

RUN TIME HOURS / DAY

3600

1800

1200

4500

2250

1500

7200

3600

2400

9000

4500

3000

14,400

7200

4800

18,000

9000

6000

21,600

10,800

7200

27,000

13,500

9000

43,200

21,600

14,400

54,000

27,000

18,000

Pool Capacity in Gallons Note: Pump operation @ 20 PSI / 60 GPM

Pool Capacity in Gallons Note: Pump operation @ 20 PSI / 75 GPM

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

SPECIALTY

ACCESSORIES

2 WARR

sump

MUNICIPAL WATER PRESSURE BOOSTER SYSTEM

YEA

booster system | laundry tray system

• 1/2 HP pumps up to 384 GPH @ 5' Depth - (50 PSI) • Whole-house municipal water pressure booster system • Precharged 8.5-gallon tank has same draw-down capacity as standard 20-gallon tank • Durable cast iron volute • Pressure switch preset at 30-50 PSI for automatic operation • Dedicated priming port for convenient volute filling • Corrosion-resistant, reinforced thermoplastic impeller and diffuser • 3/4” NPT discharge, 1¼” NPT suction

T E C H N O L O G Y

HOSE KITS

SWS50BOOST

1¼” x 24' hose kit

1½” x 24' hose kit

Electronic water sensor with alarm

HIGH WATER ALARM

WIRELESS SUMP PUMP MONITORING SYSTEM

56171

66000-WYN1

66032-WYN1

WSA120

PERFORMANCE MODEL

PSI

10'

15'

20'

25'

30'

40'

50'

60'

70'

80'

900

828

780

732

690

630

570

456

348

270

180

660

618

570

510

450

408

348

270

180

408

384

300

270

210

180

150

SWS50 BOOST

• 1/3 HP pumps up to 3060 GPH @ 0’ • Durable, reinforced, thermoplastic pump • 10 gallon capacity, durable, thermoplastic tank •1 ½” NPT inlet with 1½” discharge and vent • Pre-assembled and job-ready with detailed instructions • Ideal for draining sinks, washing machines, and laundry trays that are below the sewer line without breaking concrete • Installation 1½” check valve included

1½" CHECK VALVE KIT

For CDU, SPF & SSPF

SWITCH KIT

For Pedestal Models

SWITCH KIT

57027-001

57028-001

66005-WYN1

56395

56396

REDUCER

SUMP PUMP IMPELLER

Reduces from 1½” to 1¼”

For CDU, SPT, and SPF

PEDESTAL PUMP IMPELLER

ELECTRONIC PROBE SWITCH

TETHERED SWITCH KIT

66002-WYN1

60031-WYN1

56392

AU5ES

56835-WYN1

SYLT30

FLOW RATE IN GPH

Model

Discharge Head

0’

5’

10’

15’

SYLT30

1/3

Gallons/Hour

3060

2820

2460

1500

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCE

20 15 10 5 0

1¼" CHECK VALVE

LAUNDRY TRAY SYSTEM

WARR

1¼" CHECK VALVE AND ADAPTER

YEA

*Same as SWS50*

1000

2000

3000

4000

5000

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

ACCESSORIES

utility | sewage

2" HOSE KITS

3" HOSE KITS

2" x 20' reinforced hose kit

2" x 20' reinforced hose

3" hose and fittings kit

2" x 25' reinforced flat discharge hose

AU2HK1

AU2HS1

AU3HK1

AU2HD1

SEWAGE BASINS

BASIN COVERS

2" SUCTION STRAINER

PC4 BRUSH KIT Brush kit caps only

Brushes, caps, impeller, shaft seals, gasket, ball bearing

PC4 REPAIR KIT

PC4 REPAIR KIT Shaft seal, impeller, gaskets

18” x 30” basin with 2” discharge cover

18” x 30” basin with 3” discharge cover

18” x 30” poly basin without discharge cover

18” diameter 2” discharge cover

18” diameter 3” discharge cover

AU2PS1

56397

56399

56671

56286

56287

28485-WYN1

28486-WYN1

28495-001

PC4 BRUSH AND HOLDER KIT

PC2 BRUSH AND IMPELLER KIT

PC1 / PC2 IMPELLER KIT

VIP 3/4" ELBOW KIT

3" FLOW CHECK VALVE

2" FLOW CHECK VALVE

2" CHECK VALVE KIT

120-volt reverse tether switch

62015-WYN1

66058-WYN1

66059-WYN1

62002-WYN1

56805-002

66037-WYN1

66038-WYN1

AU5RT

DRILL PUMP

DRILL PUMP KIT

WDP21S

DPFTK1

FLOAT SWITCH

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

ACCESSORIES

well

JET WELL ASSEMBLIES All WAYNE CWS jet pumps require a jet assembly to complete installation. The Shallow Well Jet Assembly mounts directly to the front of CWS pump, while the 2” and 4” Well Jet Assemblies are installed in the well itself.

15266-WYN1

15267-WYN1

15522-WYN1

15537-WYN1

15453-WYN1

15454-WYN1

15591-WYN1

15739-WYN1

15767-WYN1

15792-WYN1

15596-WYN1

15791 SHALLOW WELL JET ASSEMBLY: Jet body, venturi, nozzle, gasket, mounting screws

56316-WYN1

2” JET ASSEMBLY: Jet body, jet packer, venturi, adapter, nozzle, foot valve

56326-WYN1

55465-WYN1

56319-WYN1

56317-WYN1

56322-WYN1

56324-WYN1

PERFORMANCE Model

CWS50

CWS75

CWS100

Foot valves feature perforated brass strainer.

4” JET ASSEMBLY: Jet body, venturi, nozzle

55462-WYN1

Jet Assembly

Water Lift

Jet Type

Drop Pipe

Well Diameter

56326-WYN1

0’ - 25’

Shallow

Single

BRONZE CHECK VALVES

BRONZE FOOT VALVES

FOOT VALVES

Precision machined, one piece, cast bronze body with one piece poppet and high quality spring.

LINE CHECK VALVES

Part No.

Well Size - ID

Part No.

Well Size - ID

15266-WYN1

1”

15522-WYN1

3/4’

15267-WYN1

1¼”

15591-WYN1

1’

15453-WYN1

1½”

15537-WYN1

1¼”

15454-WYN1

2”

15739-WYN1

1½”

15596-WYN1

3/4”

15767-WYN1

2”

16262

1” x 1¼”

15791*

1”

15792-WYN1*

1¼”

16860

3/4” x 1”

16861

1¼” x 1½”

* Tapped for Submersible Deep Well Pump Installations

56319-WYN1

30’ - 50’

Deep

Single

2”

55462-WYN1

50’ - 70’

Deep

Single

2”

56324-WYN1

30’ - 40’

Deep

Double

4” Minimum

56317-WYN1

40’ - 70’

Deep

Double

4” Minimum

55465-WYN1

60’ - 90’

Deep

Double

4” Minimum

56316-WYN1

0’ - 25’

Shallow

Single

56322-WYN1

30’ - 50’

Deep

Single

2”

55462-WYN1

60’ - 80’

Deep

Single

2”

56324-WYN1

30’ - 50’

Deep

Double

4” Minimum

55465-WYN1

60’ - 100’

Deep

Double

4” Minimum

Part No.

Diameter

Range

Connection

Part No.

Size

66017-WYN1

2”

0-100 PSI

1/8” Back

66034-WYN1

1”

66016-WYN1

2”

0-200 PSI

1/4” Bottom

66035-WYN1

1¼”

15991-WYN1

2”

0-100 PSI

1/8” Bottom

66041-WYN1

3/4”

66015-WYN1

2”

0-100 PSI

1/4” Bottom

66042-WYN1

1½”

56316-WYN1

0’ - 25’

Shallow

Single

56322-WYN1

30’ - 50’

Deep

Single

2”

56319-WYN1

60’ - 80’

Deep

Single

2”

56324-WYN1

30’ - 50’

Deep

Double

4” Minimum

56317-WYN1

60’ - 80’

Deep

Double

4” Minimum

55465-WYN1

90’ - 100’

Deep

Double

4” Minimum

15991-WYN1

66015-WYN1

66034-WYN1

66035-WYN1

66016-WYN1

66017-WYN1

66041-WYN1

66042-WYN1

2” PRESSURE GAUGES

DELRIN COMBO VALVES

Ranges available for all water systems and many field uses. Monitors system pressure. Phosphor - bronze precision movement. One piece housing.

Corrosion-resistant one piece molded body with exclusive poppet design which reduces friction and increases water flow by 50%.

SPECIFICATIONS

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

ACCESSORIES

well

66029-WYN1

66021-WYN1

15679

66022-WYN1 17064-001

BRADY AIR VOLUME CONTROLS

Diaphragm-type controls used in jet pump water systems. Maintains proper air charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. Tube and fittings package sold separately.

SQUARE D PRESSURE SWITCHES

AVC No.

15902-WYN1

15956-WYN1

SWS100, CWS100, CWS75

SWS50, CWS75, CWS50

Type WJ for Deep Well

Type L with Tubing

SPECIFICATIONS

Max. Tank Size

Part No.

Square D No.

Pressure Setting

Pipe Tap

15679

AV-30

42 Gallons

17064-001

FSG2-9013M4*

30-50

1/4”

66029-WYN1

AV-45

80 Gallons

66021-WYN1

FSG2-9013

30-50

1/4”

66022-WYN1

FSG-9013

20-40

1/4”

REPAIR KITS

23285-002

JET PUMP IMPELLERS

For automatic control of most domestic water systems.

SPECIFICATIONS Part No.

23285-001

TUBING ASSEMBLIES

Part No.

AVC No.

Part No.

AVC No.

15785

For AV-30

55653

Tubing Assembly

15786

For AV-42

55656

AV-45 with Tubing

JET PUMP REPAIR KIT

66025-WYN1

1/2 HP - 230 V

20# 40# Setting

16966-002

66033-WYN1

3/4 HP - 230 V

30# 50# Setting

16967-002

64031-WYN1

1 HP - 230 V

30# 50# Setting

DEEPWELL SUBMERSIBLE CONTROL BOX Above ground control boxes are used for starting and thermal protection on single phase, 3 - wire submersible motors.

56874-002

Kit contains all the seals needed to repair all jet pumps. Seals included: volute o-ring, shaft seals and nozzle o-ring.

16965-002

FLOAT TYPE AIR VOLUME CONTROLS

Maintains roper relation of volume of air and quantity of water in the pressure tank. Body threaded for 1¼” tank connection. 1/4” tap for pressure gauge.

17071-001 DELUXE SUBMERSIBLE TORQUE ARRESTOR

Unique two piece design allows easy assembly. Helps center pump in any 4” through 8” well, preventing damage to drop cable, pump, and pipe from pump starting torque. Includes stainless steel clamps.

56393 JET PUMP SHAFT SEAL

Submersible fittings package for precharged tanks.

JET PUMP SWITCHES

17067-001 PITLESS ADAPTER

Compact pitless adapter body of red brass for submersible pump applications. One size fits 4½” - 8” well casing with 1” drop pipe. Tested to 150 PSI.

17066-WYN1

15998 3-Wire Splicing Kit

CABLE GUARD Holds cables in place.

DEEPWELL FRANKLIN MOTOR LEAD 2 or 3 wire 14 gauge wire.

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

ACCESSORIES

INDEX

well

sump

SUMP PUMPS & ACCESSORIES

PRECHARGED WATER SYSTEM TANKS

Enamel coated steel tanks provide easy accessibility for installation. Heavy duty bladder - FDA approved material is capable of expanding 4 times its normal size. It eliminates water-logging, corrosion, and rust as water never contacts the air in the tank. Precharged tanks deliver draw down equal to conventional tanks twice their size. Bottom discharge combats taste and odor, and allows universal replacement with 90% of market.

59402-001

59400-001

59403-001

59401-001

59404-001 59405-001

59502-WYN1

59406-001

23224-002

PRECHARGED TANK SPECIFICATIONS Part Number

Tank Description

Gallon Capacity

Dimensions Diameter x Height (in.)

Weight Lbs.

System Connection

20/40 PSI

30/50 PSI

Optional Pump Stand

59401-001

Mounts on Pump

4.4

10” x 15”

3/4” NPT

1.6

1.4

None

59400-001

Mounts on Pump

2.1

9” x 10¼”

3/4” NPT

None

59402-001

Vertical

14.0

16” x 22”

1” NPT

5.2

4.3

44006-001

59403-001

Vertical

20.0

16” x 29”

1” NPT

7.4

6.2

44006-001

59404-001

Vertical

32.0

16” x 43”

1” NPT

11.8

9.9

44007-001

59405-001

Vertical

62.0

21” x 48”

1¼” NPT

22.9

19.2

44007-001

59406-001

Vertical

88.0

26” x 45”

121

1¼” NPT

31.5

26.4

44007-001

59502-WYN1

Horizontal

8.5

12½” x 20”

3/4” NPT

3.1

2.6

None

23224-002

Horizontal

15.04

23" x 18"

1” NPT

5.9

5.0

None

EPOXY COATED CONVENTIONAL WATER SYSTEMS TANKS

Positive adhesion and corrosion resistance are provided by cold rolled steel with high strength-to-weight ratio, two separately applied high temperature cured epoxy coatings inside and baked epoxy coating outside.

3012 3022

Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

SSSEE980

59917-WYN1

21419-5

10.00

17.37

1.01

WSS30V

17961-WYN1

21357-0

14.00

9.00

13.75

1.00

21473-7

22.50

17.00

11.50

2.55

WSS20V ESP45

58343-WYN1

21281-8

22.50

16.00

13.50

2.81

ESP25

57680-WYN1

20752-4

9.30

16.30

10.80

0.95

ESP15

57609-WYN1

10739-8

16.30

9.30

10.80

0.95

WSA120

66903-WYN1

21404-1

7.00

4.00

9.25

0.15

EWP10

58332-WYN1

21131-6

5.00

5.50

12.00

0.19

CDU980E

57655-WYN2

21474-4

10.00

14.00

0.81

EE980

57655-WYNE

21408-9

10.00

13.75

0.80

19.5

CDU800

56270-WYN3

10009-2

10.00

14.00

0.81

18.5

CDU790

56137-WYN3

10001-6

10.00

14.00

0.81

EE800

56270-WYNE

21428-7

10.00

14.00

0.81

EE790

56137-WYNE

21427-0

10.00

14.00

0.81

CDT50

57603-WYN1

20489-9

10.00

14.00

0.81

CDT33

57602-WYN1

20488-2

10.00

14.00

0.81

SSPF50

57627-WYN1

20430-1

10.00

14.00

0.81

SSPT50

57625-WYN1

20422-6

10.00

14.00

0.81

SPF50

57611-WYN1

20365-6

10.00

14.00

0.81

SPF33

57610-WYN1

20364-9

10.00

14.00

0.81

12 15

SPT50

57601-WYN1

20363-2

10.00

14.00

0.81

SPT33

57600 -WYN1

20362-5

10.00

14.00

0.81

WSF50

57643-WYN1

20465-3

9.30

8.80

11.00

0.52

WST50

57725-WYN1

21012-8

9.30

8.80

11.00

0.47

WST40

57640-WYN1

20461-5

9.30

8.80

11.00

0.52

WST30

57639-WYN1

20460-8

9.30

8.80

11.00

0.52

RSP130

58325-WYN1

20732-6

9.50

9.00

12.00

0.59

SPV800

56285

10042-9

8.30

35.80

1.43

SPV500

56128

10032-0

8.30

35.80

1.43

PTU50

57658-WYN1

20623-7

8.30

35.80

1.43

PTU30

57522-WYN1

20815-6

9.00

8.00

36.00

1.50

56171

10400-7

16.00

20.00

6.00

1.11

66000-WYN1

20353-3

16.00

20.00

6.00

1.11

57027-001

10744-2

2.80

5.00

0.02

4 oz.

57028-001

10395-6

3.00

7.80

0.04

11 oz.

66005-WYN1

20370-0

2.80

7.00

0.03

6 oz.

56395

10390-1

0.10

5.00

9.00

0.03

2 oz.

56396

10391-8

0.10

5.00

9.00

0.03

3 oz.

66002-WYN1

20367-0

0.10

5.50

7.00

0.00

8 oz.

60031-WYN1

20418-9

0.10

9.00

7.00

0.00

3 oz.

56392

10387-1

0.10

5.00

9.00

0.00

2 oz.

AU5ES

66061-WYN1

20621-3

3.50

3.00

7.00

0.04

56835-WYN1

56385-WYN1

10472-4

7.50

3.00

7.50

0.10

66032-WYN1

20309-0

11.00

9.00

7.00

0.40

5.5 oz.

SPECIFICATIONS

Part Number

Tank Description

Gallon Capacity

Tank Dimensions

Weight Lbs.

System Connection

20/40 PSI

30/50 PSI

3012

Horizontal

12 x 28

3/4” NPTF

1.2

3022

Horizontal

16 x 38

3/4” NPTF

4.6

3.0

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

INDEX

utility

sewage | well

UTILITY PUMPS & ACCESSORIES Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

GPH550

57811-WYN1

20586-5

20.00

16.25

17.50

3.29

SEP8

56240

10370-3

17.30

13.30

20.30

2.70

100

GPH400

57809-WYN1

20585-8

19.00

15.75

2.73

SEP6

56238

10369-7

17.30

13.30

20.30

2.70

104

GPS400

57825-WYN1

21220-7

19.00

18.00

14.25

2.82

SEP5

56237

10368-0

17.30

13.30

20.30

2.70

EEAUP250

57729-WYN1

21423-2

7.56

12.69

0.41

SEP4

56236

10367-3

17.30

13.30

20.30

2.70

RUP160

57719-REL1

20735-7

7.25

5.75

11.50

0.27

DSP75

58116-WYN1

10373-4

10.80

9.30

17.00

0.99

VIP50

57711-WYN1

20598-8

6.80

11.00

0.29

DSP60

58115-WYN1

10371-0

10.80

9.30

17.00

0.99

VIP25

57701-WYN1

20400-4

6.80

11.00

0.29

9.5

CSE50TE

58112-WYN2

21475-1

12.00

10.00

15.00

1.04

VIP15

57700-WYN1

20399-1

6.80

11.00

0.29

SEL50

57333-WYN4

20125-6

12.00

8.50

17.00

1.00

SEL40

57330

20124-9

12.00

8.50

17.00

1.00

RPP50

58117-WYN1

20755-5

7.00

9.75

16.00

0.62

TSC130

56517

10075-7

7.00

9.00

0.26

TSC160

57712-WYN1

20610-7

9.80

11.00

0.61

GFU110

57710-WYN2

20544-5

6.30

5.80

10.70

0.23

EFL33

57327

20123-2

12.00

8.50

17.00

1.00

58154-WYN1

20936-8

7.00

9.50

14.00

0.55

56853

10924-8

23.00

37.00

11.33

PC4

55832

10058-0

9.80

6.00

8.50

0.29

EFL30

PC4K

57727-WYN1

21133-0

8.50

12.00

9.50

0.56

SYDSP60

PC2

57717-WYN1

20620-6

9.00

7.60

0.36

7.25

SYSSEL40

57336

20129-4

37.00

23.00

11.33

PC1

57716-WYN1

20619-0

9.00

7.60

0.36

6.3

SYSEL40

57383-001

20334-2

23.00

37.50

11.48

WCP85

59907-WYN1

21110-1

5.50

10.50

5.50

0.18

56286

20189-8

22.00

31.00

8.68

WDP21S

56678-WYN1

10399-4

0.10

5.00

9.00

0.07

6 oz.

56287

20280-2

22.00

31.00

8.68

DPFTK1

62027-WYN1

20618-3

7.50

2.75

6.38

0.08

13 oz.

28485-WYN1

21352-5

21.75

30.16

8.26

18.5 2.55

AU2HK1

62005-WYN1

20579-7

27.00

26.30

7.00

2.88

28486-WYN1

21353-2

20.41

0.39

9.40

AU2HS1

16510-002

20480-6

27.00

26.30

7.00

2.88

17.75

28495-001

21470-6

20.50

20.5

0.75

0.18

4.50

AU3HK1

62025-WYN1

20651-0

33.75

11.50

7.58

56805-002

20183-6

5.00

8.80

0.13

2.50

AU2HD1

16511-WYN1

10794-7

9.50

11.80

4.30

0.28

66037-WYN1

20182-9

0.10

13.50

7.00

0.01

6 oz.

66038-WYN1

10792-3

0.10

13.50

7.00

0.01

1 oz.

AU5RT

66051-WYN1

20631-2

7.50

3.50

7.50

0.11

2 Ship Wt. (lbs)

AU2PS1

SEWAGE PUMPS & ACCESSORIES

66036-WYN1

20180-5

0.10

9.00

7.00

0.00

56397

10392-5

0.10

5.00

4.50

0.01

56399

10394-9

0.10

5.00

9.00

0.04

0.26

56671

10913-2

0.10

5.00

9.00

0.04

3 oz.

62015-WYN1

20589-6

6.00

5.50

1.20

0.02

1 oz.

66058-WYN1

20655-8

5.00

1.00

4.50

0.01

1 oz.

66059-WYN1

20656-5

5.50

6.50

0.02

1 oz.

62002-WYN1

20433-2

1.69

2.9

2.39

6.78

0.05

WELL PUMPS & ACCESSORIES Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

SWS100

56921

10615-5

22.30

11.50

10.30

1.53

SWS75

56914

10613-1

22.30

11.50

10.30

1.53

SWS50

56907

10611-7

22.30

11.50

10.30

1.53

JSU50

58015-WYN1

20552-0

12.50

23.50

9.00

1.53

CWS100

56956

10597-4

22.30

11.50

10.30

1.53

CWS75

56949

10595-0

22.30

11.50

10.30

1.53

CWS50

56942

10579-0

22.30

11.50

10.30

1.53

JCU50

58214-WYN1

20955-9

12.50

23.50

9.00

1.53

T100S10-2

57117-WYN3

20415-8

30.50

4.75

4.50

0.38

T75S10-4

57116-WYN3

20410-3

24.50

4.75

4.50

0.30

T75S10-2

57115-WYN3

20414-1

24.50

4.75

4.50

0.30

T51S10-4

57411-WYN1

20611-4

24.50

4.75

4.50

0.30

T50S10-4

57114-WYN3

20409-7

24.50

4.75

4.50

0.30

T50S10-2

57113-WYN3

20413-4

24.50

4.75

4.50

0.30

SWS50-WX102

56909

10722-0

23.50

12.50

23.00

3.91

SWS50-30PCA

56912

10665-0

21.50

16.30

38.50

7.81

SWS50-8.5FX

59501-WYN1

20355-7

29.00

14.00

28.00

6.58

JSU50-8.5FX

58010-WYN1

20354-0

29.00

14.00

38.00

8.69

JSU50-WX102

58012-WYN1

10720-6

23.50

12.50

23.00

3.91

JSU50-30PCA

58013-WYN1

10663-6

21.75

16.00

38.25

7.70

SWS50-12P

56910

10707-7

28.25

12.75

28.25

5.89

SWS50-30P

56911-WYN1

10688-9

39.80

17.50

32.00

13.18

JSU50-12P

58011-WYN1

10705-3

28.25

12.75

28.25

5.89

JSU50-30P

58014-WYN1

10686-5

39.75

17.50

32.75

13.18

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com

INDEX

well

well | lawn | pool | specialty

WELL PUMPS & ACCESSORIES

Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

56316-WYN1

10404-5

10.00

4.50

4.00

0.10

17067-001

20257-4

3.00

2.80

4.50

0.02

3 oz.

56326-WYN1

10402-1

10.00

3.80

4.00

0.09

17066-WYN1

20164-5

7.00

5.50

0.50

0.01

0.12

55462-WYN1

10405-2

18.50

5.40

5.00

0.28

15998

20174-4

0.50

0.10

0.00

3 oz.

56319-WYN1

10406-9

18.50

5.50

5.00

0.29

59402-001

20207-9

16.50

23.00

3.62

56322-WYN1

10407-6

18.50

5.50

5.00

0.29

59403-001

10439-7

16.50

30.00

4.73

55465-WYN1

10411-3

18.50

5.50

5.00

0.28

59404-001

20002-0

17.00

44.50

7.44

56317-WYN1

10413-7

18.50

5.50

5.00

0.28

59405-001

20209-3

21.50

49.00

13.11

56324-WYN1

10412-0

18.50

5.40

5.00

0.31

59406-001

20210-9

26.75

50.25

20.81

121

15522-WYN1

10804-3

1.30

3.80

0.00

59400-001

20199-3

13.00

9.00

9.25

0.63

15537-WYN1

20004-4

2.50

4.50

0.02

59401-001

10437-3

16.50

10.50

1.05

15591-WYN1

10805-0

3.90

2.00

0.01

59502-WYN1

20435-6

13.00

22.00

15.00

2.48

15739-WYN1

20005-1

2.80

2.60

4.20

0.02

23224-002

20212-3

23.20

16.00

18.30

3.95

15767-WYN1

10806-7

7.20

8.10

0.25

3012

20201-7

15.80

12.80

39.50

4.62

3022

10438-0

19.80

16.80

39.50

7.60

Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

PLS100

58418-WYN1

20713-5

18.00

9.50

11.75

1.16

WLS200

58409-WYN1

20485-1

20.00

10.00

1.16

15791

20243-7

3.80

2.00

0.01

1.30

15792-WYN1

20244-4

2.50

4.50

0.02

15266-WYN1

10800-5

2.00

5.30

0.01

15267-WYN1

10801-2

2.10

2.00

5.10

0.01

15453-WYN1

10802-9

2.50

6.50

0.02

15454-WYN1

10803-6

3.50

3.80

7.80

0.06

15596-WYN1

10799-2

1.50

4.00

0.01

12 oz.

15991-WYN1

10926-2

5.00

4.00

1.00

0.01

5 oz.

66015-WYN1

10427-4

0.10

4.00

5.00

0.01

4 oz.

66016-WYN1

10431-1

0.10

4.00

5.00

0.01

5 oz.

66017-WYN1

10795-4

0.10

4.00

5.00

0.01

66034-WYN1

10574-5

0.10

9.00

7.00

66035-WYN1

10575-2

0.10

9.00

LAWN PUMPS

WLS150

58408-WYN1

20484-4

20.00

10.00

1.16

WLS100

58407-WYN1

20483-7

20.00

10.00

1.16

WLS75

58406-WYN1

20482-0

20.00

10.00

1.16

3 oz.

Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

0.00

4 oz.

WIP150

58411-WYN1

20531-5

25.50

8.70

15.00

1.93

7.00

0.00

6 oz.

WIP100

58410-WYN1

20530-8

25.50

8.70

15.00

1.93

Model No.

Finished Good

UPC 0-40066

Length (in)

Width (in)

Height (in)

Cube Feet

Ship Wt. (lbs)

SWS50BOOST

01270-WYN1

21216-0

13.75

28.75

27.75

6.35

SYLT30

57399-WYN4

20835-4

17.30

11.30

16.50

1.87

66041-WYN1

10573-8

0.10

4.00

5.00

0.00

3 oz.

66042-WYN1

10576-9

0.10

13.50

7.00

0.01

7 oz.

15679

20014-3

2.50

3.80

0.01

66029-WYN1

20010-5

0.10

7.00

6.00

0.00

15785

20248-2

2.50

3.80

0.01

3 oz.

15786

20249-9

2.50

3.80

0.01

0.16

55653

10783-1

0.80

6.50

0.02

6 oz.

55656

20251-2

8.00

8.30

6.00

0.23

17064-001

10798-5

3.80

4.00

0.03

66021-WYN1

10797-8

0.10

7.00

6.00

0.00

66022-WYN1

10426-7

0.10

7.00

6.00

0.00

16965-002

20171-3

9.00

5.50

3.00

0.09

16966-002

20177-5

9.00

5.50

3.00

0.09

3.25

16967-002

20178-2

9.00

5.50

3.00

0.09

3.50

66025-WYN1

10389-5

0.10

13.50

7.00

0.01

11 oz.

66033-WYN1

10434-2

0.10

9.00

7.00

0.00

11 oz.

64031-WYN1

21063-0

9.00

7.00

3.50

0.13

0.70

23285-001

20342-7

4.5

1.85

0.02

0.25

23285-002

20343.4

4.5

1.85

0.02

0.25

15902-WYN1

20012-9

1.80

4.00

10.00

0.04

15956-WYN1

20111-9

2.50

12.00

0.05

56874-002

10158-7

6.00

0.13

5 oz.

17071-001

20266-6

0.10

6.00

15.00

0.01

3 oz.

56393

10388-8

0.10

5.00

4.50

0.00

2 oz.

POOL PUMPS

SPECIALTY PUMPS

All prices, products, designs and materials are subject to change without notice.

Customer Service: 1-800-237-0987 Web Site: www.waynepumps.com