OUTDOOR MISTING SYSTEM Hospitality /Industry /Agriculture /Landscape /Wineries
/
f
f
f f
/
& drip
/
fresh
www.dripandfresh.com
/
ff
f
f
INDEX
HIGH PRESSURE
01 - 05
HIGH PRESSURE PUMP SYSTEM
02- 03
HIGH PRESSURE PUMPS (NAKED)
02
HIGH PRESSURE PUMS SYSTEMS
03
LIGHT HIGH PRESSURE PUMPS SISTEMS
03
PIPE
04- 05
POLYAMIDE PIPE
04
POLYETHYLENE PIPE
05
STAINLESS STEEL PIPE
05
NOZZLES
07
STANDARD NOZZLES AND TAPS
07
STANDARD NOZZLES WITH DRIP SYSTEM
07
NOZZLES WITH DRIP SYSTEM AND MESH FILTER
07
HIGH FLOW NOZZLE 95º OUTPUT ANGLE
07
ACCESSORIES
08 - 12
1/4” ACCESSORIES BRIGHTNESS SERIES
08
3/8” ACCESSORIES BRIGHTNESS SERIES
09
1/2” ACCESSORIES BRIGHTNESS SERIES
10
1/4” ACCESSORIES “A” SERIES
11
3/8” ACCESSORIES “A” SERIES
12
ELECTRIC VALVES
13
COMPLEMENTS
15
SPECIAL ACCESSORIES
16
FILTRATION
17
BINDINGS AND MOUNT TOOLS
18
TOWER COOLING
20
LOW PRESSURE
22 - 24
INSTALATION ACCESSORIES
22
WATER TIMER
23
COLORFUL BOX SELLER (P.O.S.)
24
ELECTRIC MEMBRANE PUMP WITH TIMER AND DISCHARGE VALVE
24
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
1
HIGH PRESSURE PUMP SYSTEM
All these equipements are made up by an electric motor and a three ceramic piston high pressure pump. The motor speed is 1500 rpm and the voltage (unless otherwise specified) is 220V 50Hz monophasic and 380V 50Hz triphasic.
Crankshaft oil bath.
3 MODELS:
TECHNICAL FEATURES:
NAKED EQUIPMENT COMPACT EQUIPMENT
EQUIPMENT LG
70 BAR PERFORMANCE l/min l/h
MOTOR
Max. nยบ nozzles Min. nยบ nozzles 0,2 mm. 0,3 mm.
CV
KW
Code
Code
Code
D466
D570-13
D570LG
2,1
126
27
18
D467
D571-13
D571LG
4,2
252
53
35
D468
D572-13
7
420
89
58
1,5 CV II 1,00
D469
D573-13
9
540
114
75
2 CV II
1,50
D474
D574-13
10
600
127
83
2 CV III
1,50
D475
15
900
190
125
3 CV III
2,20
D476
20
1200
253
167
4 CV III
3,00
D477
24
1440
304
200
1/2 CV II 0,37 1 CV II
0,75
5,5 CV III 4,00
HIGH PRESSURE PUMPS (NAKED) ELECTRIC PUMP, CONSISTS OF: - Electric Motor - Three Ceramic piston pump - Pressure regulating valve
Installation of electrical equipment suitable for the operation of this group is mandatory. An electrical breaker is essential to prevent electrical problems that damage the engine.
65 cm.
37 cm.
WE RECOMEND: A Bedplate for D475, D476 and D477 pumps. Ref.: G220
3 cm.
2
www.dripandfresh.com
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
Made in
UE
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
HIGH PRESSURE PUMP SYSTEM
HIGH PRESSURE COMPACT PUMPS: HIGH PRESSURE PUMPS WITH EPOXI PAINTED HOUSING - Pressure regulating valve - Glycerine Gauge - Manual drain valve - Working valve - Automatic discharge valve - General On/Off switch - Electric circuit breaker - Thermal motor protection - Working LED lamp - Warning LED lamp
Made in
UE
ALUMNUM MANIFOLD: - High pressure hose - High pressure Outlets
ELECTRICAL PANEL CONTROLLER EQUIPPED WITH: - Twin timer Programmer - Working hours Counter - On/Off Switch
SUPPLIED WITH WATER INLET COUPLINGS AND RUBBER SILENTBLOCK
MESUREMENTS (mm):
135
front
right
rear
left
285
570
395
345
HIGH PRESSURE PUMPS LG HIGH PRESSURE PUMPS WITH EPOXI PAINTED HOUSING - Working valve - Power wire with plug.
45 x 25 x h 32 cm.
ELECTRICAL MAIN BOARD EQUIPED WITH: - Twin timer - Working hours counter - On/Off Switch - Electric circuit breaker - Thermal motor protection - Working LED lamp - Warning LED lamp - Socket for pump - Socket for automatic discharge valve
ALUMNUM MANIFOLD:
Made in
UE
- High pressure hose - Manual drain valve - 3/8� High pressure Outlets - Automatic discharge valve with electric cap
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
SUPPLIED WITH WATER INLET COUPLINGS AND RUBBER SILENTBLOCK
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
3
PIPE POLYAMIDE STRAIGHT STRIP PIPES. Code
Size
Color
D302
75 cm. 1/4” pipe (strip)
Black
D303
75 cm. 1/4” pipe (strip)
White
D304
75 cm. 1/4” pipe (strip)
Grey
D299
75 cm. 3/8” pipe (strip)
White
D300
75 cm. 3/8” pipe (strip)
Grey
D301
75 cm. 3/8” pipe (strip)
Black
POLYAMIDE ROLL PIPES 1/4” (6,35 x 3,6 mm). Code
Size
Color
D290-25
25 m. 1/4” pipe (roll)
Grey
D290-50
50 m. 1/4” pipe (roll)
Grey
D290
100 m. 1/4” pipe (roll)
Grey
D293
300 m. 1/4” pipe (3 rolls of 100 m.)
Grey
D291-25
25 m. 1/4” pipe (roll)
White
D291-50
50 m. 1/4” pipe (roll)
White
D291
100 m. 1/4” pipe (roll)
White
D294
300 m. 1/4” pipe (3 rolls of 100 m.)
White
D292-25
25 m. 1/4” pipe (roll)
Black
D292-50
50 m. 1/4” pipe (roll)
Black
D292
100 m. 1/4” pipe (roll)
Black
D295
300 m. 1/4” pipe (3 rolls of 100 m.)
Black
POLYAMIDE ROLL PIPES 3/8” (9,52 x 5 mm). Code
Size
Color
D274-25
25 m. 3/8” pipe (roll)
Grey
D274-50
50 m. 3/8” pipe (roll)
Grey
D274
100 m. 3/8” pipe (roll)
Grey
D278
300 m. 3/8” pipe (3 rolls of 100 m.)
Grey
D275-25
25 m. 3/8” pipe (roll)
White
D275-50
50 m. 3/8” pipe (roll)
White
D275
100 m. 3/8” pipe (roll)
White
D279
300 m. 3/8” pipe (3 rolls of 100 m.)
White
D276-25
25 m. 3/8” pipe (roll)
Black
D276-50
50 m. 3/8” pipe (roll)
Black
D276
100 m. 3/8” pipe (roll)
Black
D280
300 m. 3/8” pipe (3 rolls of 100 m.)
Black
Polyamide pipe (PA12HR): - Temperature: -40ºC to 80ºC. - Burst pressure at 20ºC: 257 Bar - Working pressure: 85 Bar. 4
www.dripandfresh.com
NOTE: We can supply straight strips of any length measurement on request.
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
PIPE
POLYETHYLENE HIGH PRESSURE ROLL PIPE 3/8” (9,72 x 4,75 mm.) High Density Polyethylene Pipe (PEA).
Code
Size
D272
25 m. black 3/8” pipe (roll)
D273
50 m. black 3/8” pipe (roll)
STAINLESS STEEL HIGH PRESSURE SMOOTH PIPE. Code
Size
Quality
D314
300 cm. x 3/8”
AISI 316
D318
300 cm. x 1/2”
AISI 304
D319
300 cm. x 1/2”
AISI 316
Valid for use with compression accessories.
STAINLESS STEEL HIGH PRESSURE PIPE WITH SLOTTED ENDS. Code
Size
Quality
NOTE:
D314-300
300 cm. x 3/8”
AISI 316
We can supply slotted pipes of any length measurement on request.
D314-100
100 cm. x 3/8”
AISI 316
D314-75
75 cm. x 3/8”
AISI 316
D314-25
25 cm. x 3/8”
AISI 316
D318-300
300 cm. x 1/2”
AISI 304
D318-100
100 cm. x 1/2”
AISI 304
D318-75
75 cm. x 1/2”
AISI 304
D318-25
25 cm. x 1/2”
AISI 304
D319-300
300 cm. x 1/2”
AISI 316
D319-100
100 cm. x 1/2”
AISI 316
D319-75
75 cm. x 1/2”
AISI 316
D319-25
25 cm. x 1/2”
AISI 316
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
WARNING: slotted end necessary for attachment to the accessories “snap-in” connector.
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
5
LANDSCAPING
RESTAURANTS
PATIOS
INDUSTRY
6
www.dripandfresh.com
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
HOTELS & MALLS
NOZZLES STANDARD NOZZLES AND TAPS. Code
Size
Units
D203
Standard nozzle 0,3 mm. x 10/24
1
D203-10
Standard nozzle 0,3 mm. x 10/24
10
D203-50
Standard nozzle 0,3 mm. x 10/24
50
D203-100
Standard nozzle 0,3 mm. x 10/24
100
D201
Blind tap 10/24
1
D201-10
Blind tap 10/24
10
D201-50
Blind tap 10/24
50
D201-100
Blind tap 10/24
100
Standard nozzle 0,3 mm x 10/24
Blind tap 10/24
Made of brass. Usable at any pressure.
STANDARD NOZZLES WITH DRIP SYSTEM. Code
Size
Units
D238
0,15 mm. x 10/24
1
D238-50
0,15 mm. x 10/24
50
D238-100
0,15 mm. x 10/24
100
D232
0,2 mm. x 10/24
1
D232-50
0,2 mm. x 10/24
50
D232-100
0,2 mm. x 10/24
100
D233
0,3 mm. x 10/24
1
D233-50
0,3 mm. x 10/24
50
D233-100
0,3 mm. x 10/24
100
D234
0,4 mm. x 10/24
1
D234-50
0,4 mm. x 10/24
50
D234-100
0,4 mm. x 10/24
100
D235
0,5 mm. x 10/24
1
D235-50
0,5 mm. x 10/24
50
D235-100
0,5 mm. x 10/24
100
Made of nickel plated brass and stainless steel on the outside. Equipped with drip system.
NOZZLES WITH DRIP SYSTEM AND MESH FILTER. Code
Size
Units
D241
Nozzle with drip system 0,15 mm. x 10/24
1
D242
Nozzle with drip system 0,2 mm. x 10/24
1
Made of nickel plated brass and stainless steel on the outside. Equipped with drip system.
HIGH FLOW NOZZLE 95ยบ OUTPUT ANGLE. Code
Size
Units
D243
0,5 mm. x 10/24
1
Bar 30 20 10 0
0,5
1
1,5
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
2
2,5
l/min.
Working pressure: 10 to 30 Bar. Flow: 0,9 to 2,3. Output angle: 95ยบ. Misting reach: from 2,5 to 3 m.
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
95ยบ www.dripandfresh.com
7
1/4” ACCESSORIES BRIGHTNESS SERIES
“SNAP IN” 1/4” ACCESSORIES BRIGHTNESS SERIES. Code
Description
Size
Units
D163BR
Automatic elbow
1/4”
1
D168BR
Male connector
1/4” x RM 1/4”
1
D171BR
Automatic cross connector
1/4”
1
D172BR
Automatic tee connector
1/4”
1
D190BR
Automatic straight connector for nozzle
1/4” x 10/24
1
D193BR
Automatic Reduced tee connector
3/8” x 1/4” x 3/8”
1
D191BR
Automatic tee connector for 2 nozzles to 180º
1/4” x (2) 10/24
1
D192BR
Automatic tee connector for 2 nozzles to 120º
1/4” x (2) 10/24
1
D196BR
Automatic end tap for nozzles to 180º
1/4” x 10/24
1
D197BR
Automatic end tap for nozzles to 90º
1/4” x 10/24
1
D19814
Stem tap for piece
1/4”
1
Automatic elbow
Male connector
Nickel-plated brass body with NBR o-rings and “snap in” recoverable connection.
Automatic cross connector
This Snap In Accessories works between 0 to 85 bar and from -20ªC to 80ºC of temperature. Valid for polyamide, polyethylene and stainless steel pipes.
Automatic straight connector for nozzle
Automatic tee connector
180º Automatic tee connector for 2 nozzles to 180º
Automatic Reduced tee connector
Automatic end tap for nozzles to 180º
8
www.dripandfresh.com
120º
180º
Automatic end tap for nozzles to 90º
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
Automatic tee connector for 2 nozzles to 120º
Stem tap
90º
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
3/8” ACCESSORIES BRIGHTNESS SERIES
“SNAP IN” 3/8” ACCESSORIES BRIGHTNESS SERIES. Code
Description
Size
Units
D187BR
Automatic straight connector for nozzle
3/8” x 10/24
1
D193BR
Automatic Reduced tee connector
3/8” x 1/4” x 3/8”
1
D188BR
Automatic tee connector for 2 nozzles to 180º
3/8” x (2) 10/24
1
D189BR
Automatic tee connector for 2 nozzles to 180º
3/8” x (2) 10/24
1
D194BR
Automatic end tap for nozzles to 180º
3/8” x 10/24
1
D195BR
Automatic end tap for nozzles to 90º
3/8” x 10/24
1
D19834
Stem tap for piece
3/8”
1
Automatic straight connector for nozzle
Automatic Reduced tee connector
Nickel-plated brass body with NBR o-rings and “snap in” recoverable connection. This Snap In Accessories works between 0 to 85 bar and from -20ªC to 80ºC of temperature. Valid for polyamide, polyethylene and stainless steel pipes. Stem tap
180º Automatic tee connector for 2 nozzles to 180º
Automatic end tap for nozzles to 180º
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
120º Automatic tee connector for 2 nozzles to 120º
180º
Tlf.: +34 91 737 44 74
Automatic end tap for nozzles to 90º
Fax: +34 91 737 36 18
90º
www.dripandfresh.com
9
1/2” ACCESSORIES BRIGHTNESS SERIES
“SNAP IN” 1/2” ACCESSORIES BRIGHTNESS SERIES. Code
Description
Size
Units
D370BR
Reduced male connector
1/2” x RM 3/8”
1
D371BR
Female connector
1/2” x RH 3/8”
1
D372BR
Automatic elbow
1/2”
1
D373BR
Automatic tee connector
1/2”
1
D374BR
Reduced automatic tee connector
1/2” x 3/8” x 1/2”
1
D375BR
Reduced female tee connector
1/2” x RH 3/8” x 1/2”
1
D376BR
Automatic straight connector for nozzle
1/2” x 10/24
1
D377BR
Automatic tee connector for 2 nozzles to 180º
1/2” x (2) 10/24
1
D378BR
Automatic tee connector for 2 nozzles to 120º
1/2” x (2) 10/24
1
D379BR
Automatic straight connector
1/2”
1
D380BR
Reduced automatic connector
1/2” x 3/8”
1
D381BR
Automatic end tap for nozzles to 90º
1/2” x 10/24
1
D382BR
Automatic end tap for nozzles to 180º
1/2” x 10/24
1
Reduced male connector
Female connector
Automatic elbow
Automatic tee connector
Nickel-plated brass body with NBR o-rings and “snap in” recoverable connection. This Snap In Accessories works between 0 to 85 bar and from -20ªC to 80ºC of temperature. Valid for polyamide, polyethylene and stainless steel pipes.
Reduced automatic tee connector
180º Automatic straight connector for nozzle
Automatic tee connector for 2 nozzles to 180º
120º Automatic tee connector for 2 nozzles to 120º
Reduced female tee connector
90º
180º Automatic straight connector
10
www.dripandfresh.com
Reduced automatic connector
Fax: +34 91 737 36 18
Automatic end tap for nozzles to 180º
Tlf.: +34 91 737 44 74
Automatic end tap for nozzles to 90º
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
1/4” ACCESSORIES “A” SERIES
“SNAP IN” 1/4” ACCESSORIES “A” SERIES. Code D173 D173-25 D172 D172-10 D177 D178 D174 D174-10 D168 D169 D169-10 D170 D170-10 D163 D163-10 D164 D164-10 D165 D165-10 D166 D166-10 D167 D167-10 D171 D171-10 D179 D179-10 D180 D180-10 D181 D181-10 D175 D175-6 D176 D176-6
Description Automatic straight connector for nozzle Automatic straight connector for nozzle Automatic tee connector Automatic tee connector Orienting Tee Male Adaptor Orienting Tee Male Adaptor Automatic straight connector Automatic straight connector Male connector Reduced connector 1/4” male 3/8” Reduced connector 1/4” male 3/8” Connector 3/8” reduced male 1/4” Connector 3/8” reduced male 1/4” Automatic elbow Automatic elbow Automatic end elbow for nozzle Automatic end elbow for nozzle Male elbow Male elbow Elbow pipe 1/4” male 3/8” Elbow pipe 1/4” male 3/8” Elbow pipe 3/8” male 1/4” Elbow pipe 3/8” male 1/4” Automatic cross connector Automatic cross connector Reducer 1/4” piece 3/8” pipe Reducer 1/4” piece 3/8” pipe Reducer 3/8” piece 1/4” pipe Reducer 3/8” piece 1/4” pipe Female adaptor 45º for nozzle Female adaptor 45º for nozzle Male - female valve Male - female valve Push in valve Push in valve
Size 1/4” x 10/24 1/4” x 10/24 1/4” 1/4” 3/8” x rm 1/4” 1/4” x rm 3/8” 1/4” x 1/4” 1/4” x 1/4” 1/4” x rm 1/4” 1/4” x rm 3/8” 1/4” x rm 3/8” 3/8” x rm 1/4” 3/8” x rm 1/4” 1/4” x 1/4” 1/4” x 1/4” 1/4” x 10/24 1/4” x 10/24 1/4” x rm 1/4” 1/4” x rm 1/4” 1/4” x rm 3/8” 1/4” x rm 3/8” 3/8” x rm 1/4” 3/8” x rm 1/4” 1/4” 1/4” 1/4” x 3/8” 1/4” x 3/8” 3/8” x 1/4” 3/8” x 1/4” 1/4” x 10/24 1/4” x 10/24 1/4” 1/4” 1/4” 1/4”
Units 1 25 1 10 1 1 1 10 1 1 10 1 10 1 10 10 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 6 1 6
D173 Automatic straight connector for nozzle
D172 Automatic tee connector
D177 Orienting Tee Male Adaptor
D174 Automatic straight connector
D169 D170
D163
Male connector
Automatic elbow
D164 Automatic end elbow for nozzle
Nickel-plated brass body with NBR o-rings and “snap in” recoverable connection. This Snap In Accessories works between 0 to 85 bar and from -20ªC to 80ºC of temperature.
Made in
UE
Valid for polyamide, polyethylene and stainless steel pipes. Made in the European Union.
D179 D180 Reducer piece pipe
D165
D181 Female adaptor 45º for nozzle
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
D175 Male - female valve
Tlf.: +34 91 737 44 74
D176 Push in valve
Fax: +34 91 737 36 18
Male elbow
D165 Automatic cross connector
www.dripandfresh.com
11
3/8” ACCESSORIES “A” SERIES
“SNAP IN” 3/8” ACCESSORIES “A” SERIES. Code D157 D157-25 D156 D156-10 D162 D162-6 D177 D178 D159 D159-10 D154 D154-10 D169 D169-10 D170 D170-10 D151 D151-10 D152 D152-10 D153 D153-10 D166 D166-10 D167 D167-10 D155 D155-10 D179 D179-10 D180 D180-10 D160 D160-6 D161 D161-6
Description Automatic straight connector for nozzle Automatic straight connector for nozzle Automatic tee connector Automatic tee connector Orienting Tee Male Adaptor Orienting Tee Male Adaptor Orienting Tee Male Adaptor Orienting Tee Male Adaptor Automatic straight connector Automatic straight connector Male connector Male connector Reduced connector 1/4” male 3/8” Reduced connector 1/4” male 3/8” Connector 3/8” reduced male 1/4” Connector 3/8” reduced male 1/4” Automatic elbow Automatic elbow Automatic end elbow for nozzle Automatic end elbow for nozzle Male elbow Male elbow Elbow pipe 1/4” male 3/8” Elbow pipe 1/4” male 3/8” Elbow pipe 3/8” male 1/4” Elbow pipe 3/8” male 1/4” Automatic cross connector Automatic cross connector Reducer 1/4” piece 3/8” pipe Reducer 1/4” piece 3/8” pipe Reducer 3/8” piece 1/4” pipe Reducer 3/8” piece 1/4” pipe Male - female valve Male - female valve Push in valve Push in valve
Size 3/8” x 10/24 3/8” x 10/24 3/8” 3/8” 3/8” x M 3/8” 3/8” x M 3/8” 3/8” x M 1/4” 1/4” x M 3/8” 3/8” x 3/8” 3/8” x 3/8” 3/8” x M 3/8” 3/8” x M 3/8” 1/4” x M 3/8” 1/4” x M 3/8” 3/8” x M 1/4” 3/8” x M 1/4” 3/8” x 3/8” 3/8” x 3/8” 3/8” x 10/24 3/8” x 10/24 3/8” x M 3/8” 3/8” x M 3/8” 1/4” x M 3/8” 1/4” x M 3/8” 3/8” x M 1/4” 3/8” x M 1/4” 3/8” 3/8” 1/4” x 3/8” 1/4” x 3/8” 3/8” x 1/4” 3/8” x 1/4” 3/8” 3/8” 3/8” 3/8”
Units 1 25 1 10 1 6 1 1 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 6 1 10
D157 Automatic straight connector for nozzle
D156 Automatic tee connector
D162 Orienting Tee Male Adaptor
D159
Automatic straight connector
D169 D170
D151
Male connector
Automatic elbow
D152 Automatic end elbow for nozzle Nickel-plated brass body with NBR o-rings and “snap in” recoverable connection. This Snap In Accessories works between 0 to 85 bar and from -20ªC to 80ºC of temperature. Valid for polyamide, polyethylene and stainless steel pipes.
Made in
UE D153 D167 D166
Made in the European Union.
D179 D180 Reducer piece pipe 12
www.dripandfresh.com
D160 Male - female valve Fax: +34 91 737 36 18
D161 Push in valve Tlf.: +34 91 737 44 74
Male elbow
D155 Automatic cross connector CODEX EXPERIENCE S.L. - C.I.F.: B45736857
ELECTRIC VALVES FOR AUTOMATION
ELECTRIC VALVES. Code
Description
Size
Units
D001
Electric valve
3/8” 220V N/C 16 Bar.
1
D021
Electric valve
1/4” 220V N/C 16 Bar.
1
D007
Electric valve
1/8” 220V N/A 18 Bar.
1
D023
Electric valve
3/8” 220V N/C 80 Bar.
1
D009
Electric valve
3/8” 220V N/C 100 Bar.
1
D001 D021
D007
D023 D009
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
13
TOWER COOLING
ANIMAL BREEDING
PATIOS
PATIOS
SWIMMING POOLS SHOPS
RESTAURANTS
14
www.dripandfresh.com
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
COMPLEMENTS
COMPLEMENTS. Code
Description
Connection
Units
D003
Presostato inverso de membrana
1/4”
1
G019
Non-vibration accumulator
3/8”
1
D060
Sterilising UV lamp. 6 W - 2 l / h. Length: 5.000 h.
1/4”
1
D060-6
Sterilising UV lamp. 6 W - 2 l / h. Length: 5.000 h.
1/4”
6
D061
Sterilising UV lamp. 14 W - 6 l / h. Length: 9.000 h.
1/4”
1
D061-6
Sterilising UV lamp. 14 W - 6 l / h. Length: 9.000 h.
1/4”
6
D062
Sterilising UV lamp. 24 W - 16 l / h. Length: 9.000 h.
1/2”
1
D062-6
Sterilising UV lamp. 24 W - 16 l / h. Length: 9.000 h.
1/2”
6
D063
Sterilising UV lamp. 39 W - 46 l / h. Length: 9.000 h.
1/2”
1
R250
Replacement Dock for nozzles with drip system
-
5 3/8”
A contact opens when pressure comes below of 1 Bar Used to not operate the equipment when there is no water pressure in the mains. It is installed on the suction line, interrupting the electrical circuit switching.
D003
1/4”
Water hammer pump Absorber. Is preferably applied in systems with continuous service. Not valid in systems with automatic discharge valve.
G019 Made of stainless steel 304. It has a LED indicator. We have spare parts of the lamp as replacements.
D060 D061 D062 R250
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
15
SPECIAL PIECES
SPECIAL ACCESSORIES. These parts are useful for decorating, games and concentrating misting points.
Code
Size
Description
Units
D245
5 cm. x 10/24
Extension for nozzle
1
D246
10 cm. x 10/24
Extension for nozzle
1
D247
15 cm. x 10/24
Extension for nozzle
1
D248
20 cm. x 10/24
Extension for nozzle
1
D249
30 cm. x 10/24
Extension for nozzle
1
D255
10/24
Collector with 3 horizontal outputs
1
D256
10/24
Collector with 4 horizontal outputs
1
D257
10/24
Hexagonal collector with 3 horizantal outputs
1
D258
3/8” x 10/24
3/8” female collector with 3 outputs
1
D259
10/24
Articulated ball joint for nozzle
1
R010
Ø 33 cm. x 4 outputs 10/24
Chrome hoop for fans
1
D269
3/8” H
High pressure quick connector
1
D270
3/8” H
High pressure nose connector
1
D257
D258
D256
D255
D245 D246 D247 D2487 D249
D259
D269
90 Bar.
1/4” H D270 R010
16
www.dripandfresh.com
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
FILTRATION WALL SUPPORT FOR GLASS FILTER. Code
Tipo
D508
Double
D509
Single
D508: single
GLASS FILTER. Code
Size (length)
D505
5”
D501
9”
D509: double
Product description: The glass filter is where to store the different types of filters cartridges available to clean the water before it reaches the nozzles. We can put several filters in line so with one it removes lime (polyphosphate salts cartridge) and with the other one it removes suspended particles (polypropylene yarn cartridge).
DOMESTIC APPLICATIONS: Filtration and treatment of drinking water, protection of washers, taps and heaters. INDUSTRIAL APPLICATIONS: Pumps protections, purification systems and reverse osmosis systems with pre-filtration and microfiltration action, action for anti-fouling calcareous heating systems and dosing systems, sweetening facilities application, dechlorination, demineralization and UV sterilization.
D505: 5”
D501: 9”
POLYPHOSPHATE SALTS CARTRIDGE
POLYPROPYLENE YARN CARTRIDGE Code
Size
Code
Size
D507
12,5 cm. (para 5“)
D506
12,5 cm. (para 5“)
D500
25 cm. (para 9“)
D503
25 cm. (para 9“)
Protects the system against suspended particles in the water.
To neutralize the lime in the water.
D507: 5”
D500: 9”
D503: 9”
D506: 5”
POLYPROPYLENE CARTRIDGE FILTER FOR SMALL INSTALLATIONS. Code
Size
D520
12 cm.
D521
12 cm.
D520: 3/8”
• Max. flow.: 700 l/h. • Max. pressure: 8 Bar. • Max. temperature: 38 ºC. To be use and with treated cold water, not contaminated with micro-organisms. Pay attention to the direction of water flow. NOTE: Do not recover. Once saturated, replace it.
D521: M/H 3/8” thread
ATTENTION: In misting systems installations is recommended to replace the filters at the beginning of each season. CODEX EXPERIENCE S.L. - C.I.F.: B45736857
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
17
BINDINGS AND MOUNT TOOLS
BINDINGS AND MOUNT TOOLS. Code
Description
Size
Units
D028
Scissor pipe
To Ø 32 mm.
1
D076-10
Snap-clip for pipe
3/8”
10
D083-25
Pipe clamp nail
3/8”
25
D084
Clamps and screws for pipe support
3/8”
25
D085
White tieraps (14 cm.)
14 cm.
50
D086
Black tieraps (14 cm.)
14 cm.
50
D087
Brown tieraps (14 cm.)
14 cm.
50
D088-25
Black hose rubber clamps
3/8” (8-10 mm.)
25
D088-100
Black hose rubber clamps
3/8” (8-10 mm.)
100
D082-25
Black hose rubber clamps
1/4” (5-7 mm.)
25
D082-100
Black hose rubber clamps
1/4” (5-7 mm.)
100
D088W-25
White hose rubber clamps
3/8” (8-10 mm.)
25
D088W100
White hose rubber clamps
3/8” (8-10 mm.)
100
D082W-25
White hose rubber clamps
1/4” (5-7 mm.)
25
D082W100
White hose rubber clamps
1/4” (5-7 mm.)
100
N0409
Galvanized wire
Ø 2 mm. x 10 m.
1
N0410
Galvanized wire
Ø 2,7 mm. x 25 m.
1
N0413
Green plasticized wire
Ø 2,7 mm. x 25 m.
1
N0417
Green tensor for wire
-
1
N0416
Galvanized tensor for wire
-
1
D028
D076-10
D083-25
D084
D088W-25 D088W-100 D082W-25 D082W-100
D086
D085
D087 D088-25 D088-100 D082-25 D082-100
N0417
N0416 18
www.dripandfresh.com
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
SWIMMING POOLS
TERRACES
GARDENS
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
Tlf.: +34 91 737 44 74
REFax: ST+34 AU 91 737 36 18 RA NTS
www.dripandfresh.com
19
OUTDOOR MISTING SYSTEM Hospitality /Industry /Agriculture /Landscape /Wineries
/
/
/
/
LOW PRESSURE
f
f 20
f f
www.dripandfresh.com
& drip Fax: +34 91 737 36 18
fresh Tlf.: +34 91 737 44 74
www.dripandfresh.com
ff
f
f
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
LOW PRESSURE OUTDOOR MISTING SYSTEM DRIP & FRESH
INSTALATION ACCESSORIES. Pipe roll (6 m.) Ref.
Diameter
C5108
3/8”
Anti-drip plastic valve Packing
Ref.
1
Connection
C5125
Packing 1
10/24
C5125-3
Pipe for nebulised water system.
Brass nozzle
3
10
Ref.
Size
C5112
0,3 mm.
Packing 3
10
Brass cap
In low pressure system is difficult to avoid dripping. This item lets you install low pressure systems without leakage.
Ref.
Size
C5113
-
C5112
C5113
Packing 3
10
ter direction Wa
USE NO PIPE DOPE
Snap-in male connector Ref.
Connection
C5100
3/8” x 3/8”
Snap-in elbow Packing 1
10
To include any threaded part (eg. solenoid) to the installation.
Ref.
Connection
C5101
3/8” x 3/8”
Connection
C5103
3/8” x 3/8”
1
10
To make sharp turns
Snap-in union Ref.
Snap-in Tee Packing
Ref.
Connection
C5102
3/8” x 3/8”
1
10
To repair or join two pipes.
1
10
To split an installation in two parts.
Snap-in tee with brass nozzle Packing
Packing
Ref.
Connection
C5104
3/8” x 3/8”
Snap-in end plug
Packing 1
10
This is where the water get nebulized.
Ref.
Connection
C5105
3/8”
Packing 1
10
To complete the course of the pipe. Each zone will need one.
Snap-in tap adaptor Brass valve with filter Ref. C5106
Thread 1/2” - 3/8”
Snap-in End cap with brass nozzle Packing 1
Ref. 10
Equipped with a filter for coarse particles.
Connection
Packing
3/8”
C5117
1
10
Pipe clamp nail
Ref.
Size
Packing
C5111
3/8”
5
These clamps ensure a secure grip on any place susceptible to be screwed.
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
10
Ref.
Size
C5107
10 mm.
C5110
3/4”
C5114
3/8”
Packing 1
10
Clamps and screws for pipe support Packing 10
10
These clamps ensure a secure grip on wood.
Tlf.: +34 91 737 44 74
Connection
This item allows you to install directly into a tap. No use pipe dope. This part is provided with a rubber joint to prevent water loss.
It helps us to install the last nozzle of each zone.
Snap-Clip for pipe
Ref.
Fax: +34 91 737 36 18
Ref.
Size
Packing
C5118
3/8”
25
10
These clamps ensure a secure grip on any place able to be screwed.
www.dripandfresh.com
21
LOW PRESSURE OUTDOOR MISTING SYSTEM DRIP & FRESH
WATER TIMER. Misting starter KIT
LCD nebulization timer Ref. Packing
Ref.
1
C5115N
1
C5190
Packing
Complete and ready to install.
On Cycle: from 3 to 99 seconds. Off Cycle: from 3 to 99 seconds. Includes manual program. Operates with a 9V battery Working pressure: 0 to 8 bar. 3/4”
CONTENTS: • 7 tees for nozzle. • 1 3/4” x 3/8” faucet adaptor. • 2 elbow. • 1 end cap for nozzle. • 8 nozzles. • 15 clamps and screws. • 10 m. pipe line.
Easy to program. It works with a latching solenoid to reduce consumption and making the highest number of openings and closings.
1”
Misting extension KIT Ref.
Packing 1
C5120 CONTENTS: • 3 m pipe line • 5 Tees for nozzle. • 10 clamps and screws.
3/4”
3/8”
Misting portable shower Ref.
Medida
C5116
de 1,30 a 2,10 m.
C5116D
Polyphosphate salts cartridge Packing 1
• Adjustable height: from 1.30 to 2.10 m. • Lightweight, portable and easy to assemble. • Includes faucet and extra cap. • Adjustable head.
6 20
Ref.
Size
C5136
5”
Packing 1
12
If we have lime in the water, sooner or later we will have problems with the nebulized water.
Filtration kit
Able to reduce the heat on a terrace or pool. It is portable and you can put it wherever. All you need is water with a pressure about 3.5 Bar. Provides a fine water spray, nice when the heat intensifies.
Ref.
Size
C5135
5”
Includes: • 1 wall support. • 4 pipe adapters. • Teflon.
Includes 4 brass nozzles and faucet.
Packing 1
+2
+2
Polypropylene yarn cartridge Ref.
Medida
C5137
5”
Packing 1
12
+1
Protects the system against attacks that produce small particles that may be suspended in the water. These particles can block the nozzles.
The glass where different types of filters available to ensure that the water system becomes staying clean. We can put several kinds of filter in series so that it removes lime (polyphosphate salts) and another it removes suspended particles (polypropylene yarn). 22
www.dripandfresh.com
Fax: +34 91 737 36 18
Tlf.: +34 91 737 44 74
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
LOW PRESSURE OUTDOOR MISTING SYSTEM DRIP & FRESH
COLORFUL BOX SELLER (P.O.S.) P.O.S. box expositor
Complete box expositor Ref.
Measurements
Ref.
Measurements
C51BOXC
60 x 40 x 180 cm.
C51BOXD
53 x 23 x 142 cm.
C5190
x 12
C5190
C5115N
x 12
x 36
• Includes advertising brochures with installation instructions for consumers.
C5115N
x 12
• Includes advertising brochures with installation instructions for consumers.
SHOP
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
23
LOW PRESSURE OUTDOOR MISTING SYSTEM DRIP & FRESH
ELECTRIC MEMBRANE PUMP WITH TIMER AND DISCHARGE VALVE Low Pressure Pump with Timer and discharge valve Ref.
Pressure
Nozzeles
Flow rate (l/m)
Motor W/A
C5151
6-8 Bar
7 - 13
0,42 - 0,62
24 / 1
C5152
6-10 Bar
7 - 26
0,45 - 1,23
28,8 / 1,2
C5153
7-13 Bar
31 - 62
0,65 - 3,23
96 / 4
Packing
Snap-in conection pipe included
1
SPECIFICATIONS: • Power supply 220 V/50Hz. • Snap in connector to 3/8“ pipe PROGRAMMING: • Program time slots, on and off by its two dials. • Cyclic Scheduling, starts and stops automatically until disconnection. • Range of programming, on and off: 0.1 seconds to 10 minutes. COMPOSITION: • High impact thermoplastic cabinet 330 x 280 x 175 mm. • Electric membrane pump with transformer. • Twin Timer Scheduler with start and stop times. • Main switch start and stop, pilot signaling. • Thermal protector with reset. • Electric Power Cable. • Electric valve job. • Electric valve discharge. • Inline particle filter.
Discharge valve drain hole Inside details
C5151
Bar
C5152
C5153
14 13 12 11 10 9 8 7 6 0
24
0,25
0,50
0,75
1,00
www.dripandfresh.com
1,25
1,50
1,75
Fax: +34 91 737 36 18
2,00
2,25
2,50
2,75
Tlf.: +34 91 737 44 74
3,00
3,25
3,50
3,75
4,00
l/min.
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
NOTES
CODEX EXPERIENCE S.L. - C.I.F.: B45736857
Tlf.: +34 91 737 44 74
Fax: +34 91 737 36 18
www.dripandfresh.com
THE EUROPEAN MISTING BRAND
Tel.: 0034 91 737 44 74
Fax: 0034 91 737 36 18
www.dripandfresh.com