REASONS TO MAKE THE RIGHT CHOICE
.
BELAZ is the world’s only company using assembly-line production of mining dump trucks. We provide complete design, production and delivery of a new dump truck within 2-5 months.
Being a valued BELAZ Customer you get:
The best price/quality ratio among all world known mining dump truck producers Full compliance with ISO international standards confirmed by hundreds of users The lowest cost of ton/kilometer of carried cargo along with lowest emissions level Low maintenance costs and ability to train own stuff to save on each operation of the fleet High productivity multiplied by reliability and high availability rate etc – the list of benefits is imposing enough to get them acquired 2
September 2013 – OJSC “BELAZ” introduced the biggest mining dump truck in the world – BELAZ-75710 with payload capacity of 450 metric ton.
Best Custom Stand – Belaz Stand at AIMEX “The professionalism and creative response, coupled with fulfilling all the elements required by the client, made it a standout. The Belaz stand at AIMEX was simply breathtaking in its perfect match to the brief and the ultimate epic visual impact. The requirements for all aspects in the brief were 100% met. The submission was excellent and complete. A winner at all levels.”
BELAZ-7531E trolley assisted dump truck with payload capacity of 240 MT equipped with AC/AC drive system “Revising the past, changing the future”
BELAZ-7558 – word’s first mining dump truck with 90 MT payload capacity equipped with AC/AC electric drive system “Leader of Innovative Best Sellers for the last 5 years”
BELAZ-75137 dump truck with 130 MT payload capacity equipped with VG autonomous operation system
“Could be operated in standard – remote control – autonomous modes.”
ENGINE
Emission rate is in compliance with ЕРА Tier II Optimal engine power High torque at low engine rpm Electronic engine control and diagnostic system Low noise level Low fuel and lubricant consumption
4
Stepless speed regulation Maximum dump truck speed is 64 km/h Downhill speed control Antiskid system Brake-track master system Cruise control
5
SAFETY AND COMFORT Cast-steel components employed in critical areas of the frame where loads are the greatest. Active video surveillance system Diagonal stairs Cab noise level less than 80 dB High voltage proximity warning system with platform lift lockout Easy access to dump truck’s main units Short wheelbase – enhanced manoeuverability Original suspension design – the best traveling comfort as compared with the competitors –increase in operator’s productivity Own dump truck frame design – operator safety in the event of a front-end collision with another dump truck Design solutions – low maintenance cost, fast and easy educcation of customer’s own staff
3
Large capacity fuel tank makes it possible to work for more than 24 hours without refueling. The tank design enables easy water collection and removal with minimal fuel loss. Wiggins Fast Tanking System helps save time on tanking to increase the productivity
Three-stage filter guarantees the efficiency of air cleaning of more than 99%.
Lincoln CentroMatic automatic centralized lubrication system significantly reduces the maintenance costs.
Electronic control and diagnostic system ensures permanent condition monitoring of units and systems and prevents emergency situations.
Dual-cycle cooling system enables dump truck operation under various climatic conditions at temperatures ranging from -50°С to +50°С (from -58°F to +122°F).
COST-CUT’s EXAMPLES SISHEN MINE in the Republic of South Africa
110-220MT trucks purchases: 2011 – first 5 units 2012 – intensive usage and comparison 2013 – over 20 units 2014-15 – over 60 to come
Low purchase and operation costs is the major reason for choosing
BELAZ
During the recession periods mainly low cost equipment is used to optimize the expenses and maintain the net profit level Initial capital investment savings up to
25%
Operating cost savings up to
30%
Total cost of ownership savings up to 90MT competitors trucks parked, BELAZ 110MT trucks – in operation
30% 90MT competitors trucks parked, BELAZ 110MT trucks – in operation
7
BELAZ-75309
Cat 793D
BELAZ-75174
7 178
Dump truck annual productivity, MT per Km
7 001
6 911 9,63 10,00 9,00
7,83
8,00
0,28 0,53
7,00
1,19
1,67
6,40
6,00 5,00
2,73
4,00
0,52
3,00 2,00
2,58
1,00 0,00
0,34 0,47 0,69 2,40
1,27
Maintenance and technical support Overhaul
2,52
Tires
0,55
0,57 1,94
3,06
Fuel Operator's expenses Lease (5 years)
60 000
2 010 3 822
50 000
8 541
40 000
BELAZ-75174
Cost of one MT per km, rub
САТ 793D
19 595
30 000
3 732
20 000
18 522
10 000 0
BELAZ-75309
3 895
70 000
0,56
BELAZ-75309
BELAZ-75174
11 520 2 350 3 214 4 768 17 207
8 746 18 079 3 822
3 939 13 424
21 444
САТ 793D
Annual expenses for 1 dump truck, thousand of rub
Direct relations with main components suppliers Integration of cooperation between main component suppliers and BELAZ along with its dealers network
Building a strong, effective and reliable supply scheme through specially established trading house “BELAZ-EUROPE” Working on the basis of annual average slotting that provide BELAZ with components availability and with pricing control Constant work with suppliers in regards to quality control and availability Joint research for improvements
7
Foreign Countries
Russian Federation
14 Dealers
1 Trading and Distributing Center
CIS countries
10 Dealers
10 Service centers
8 Dealers
13 Service centers
1 Joint Venture
23 Service Centers
1 Joint Venture
19 companies OJSC “BELAZ� has a stake in 7
Dump truck spare parts delivery within whole lifecycle Prompt elimination of failures within and beyond the warranty period Provision of the full range of repair and modernization services for the delivered products Monitoring system application which controls the operation of units and systems on-line
Training of the customer’s operators on site, as well as at BELAZ training center Permanent presence of BELAZ specialists for assembling, commissioning and supervising of the delivered products.
7
14
OJSC “BELAZ” – Management Company of Holding “BELAZ-HOLDING”
40 let Oktyabrya 4, Zhodino, Minsk reg., Republic of Belarus, 222160 Tel: (+375 1775) 32313, 33970, 70838. Fax: (+375 1775) 33970. E-mail: export@belaz.minsk.by www.belaz.by
Si fi Sinofinn Global Innovation in New Energy Engineering
Contents y Introduction y Philosophy & Culture y Organizational Structure y Technology, Products & Projects y Achievements y Contacts
~Our Business~ Sinofinn operates through 3 main business divisions— Our Engineering Division serves the clients with the world class solution to systems concerning energy, metal, paper mill and environmental protection. Our Energy Developing Division is focused on investment, investment construction, construction operation and management on environment friendly projects including combined heat and power generation (CHP), coal refuse to energy, biomass to energy and wind power. The Manufacturing Division partakes in design and development of products related to the two other division.
Core Focus Distribution: Engineering Division Energy Developing Division M Manufacturing f i Di Division i i
About us In the field of new energy development, Sinofinn has mastered the technologies of BFB biomass power generation system and 1.6MW & 3MW direct-drive permanent-magnet wind turbine. And also in China, Sinofinn is a leading investor and operator in the field of new and clean energy such as thermal power generation, generation coal refuse power generation and wind energy etc with the total capacity of the systems under construction and put into operation amounting to 1500MW. Sinofinn is the only enterprise in China which has four kinds of comprehensive desulphurization processes, including LIFAC (Limestone Injection into the Furnace and Activation of Calcium Oxide) introduced from Finland, SDA (Spraying Dry Absorption) introduced from Niro of Denmark, DCFS (Double Contact Flow Scrubber) introduced from MHI of Japan and CFB (Circulation Fluidized Bed) developed by Sinofinn independently. Sinofinn has established itself as a leader in wet desulphurization technology both at home and abroad through the execution and improvements in many engineering projects.
~Philosophy~ Development Philosophy: Striving to serve the interest of China as well as Worldwide infrastructure industries with state of the art and modern technologies. To create a better future with New Energy development. Marketing Philosophy: Advanced, reliable and economical. Service Philosophy: Efficient, Efficient sincere and quick. quick Employing Philosophy: Providing the employees with a platform to display their talent and also provide ways to improve themselves, both professionally and personally. We believe that all the achievements of the company is a result of the efforts of our employees and we strive towards our goals, guided by a common philosophy.
Company Culture Discipline D di i Dedication g Brainstorming Co-ordination Learning
Organizational Structure
Our Technology, Products & Projects
Engineering Division Environment System •
FGD (SJXP,SDA,LIFAC,DCFS,ACFB,WCFB,WSA)
•
De-Nox
•
Water Treatment
Power System (Waste to Power System) •
Coal Mine Waste
•
City Waste
•
Bio-mass o ass Energy e gy
•
Metallurgical Waste Gas
Material Handling System •
Pneumatic Handling System (Fly ash, Bottom ash, FGP Ash, Pebble Coal, Granular solids, Limestone & Sandstone, Special Material etc.)
•
Mechanical Handling System
E Energy D Developing l i Division Di i i Wind power Residual-heat utilization Clean energy Cogeneration project Gas Gas-steam steam combined cycle power plants Waste to power project
Yunnan Wind Farm
DAZHOU Steel Plant
Sinofinn Manufacture Sinofinn has two active manufacturing plants: One is TianChang factory & Uni Man Power (Anhui) factory ,the other one is in Haian Some of our core products are : Expansion JointÍ’Our custom-made fabric expansion joint is affirmed by the clients for its rigid process, advanced TECHNOLOGY and d reliable li bl quality. lit W We supply l various i d design i proposall and d manufacturing f t i options. ti Our O fabric f b i expansion i joint j i t is widely used . Damper and Gate are highly important equipments at power plant installed mainly in air and flue gas system of plants to adjust the flow quantity and regulate the medium velocity velocity. The efficiency and reliability of power plant is mostly decided by the air and flue gas flowing and circulation. FRP Spray Pipe is based on high temperature resistant ethylene resin (epoxy resin, Bakelite, unsaturated polyester resin, organic g silicon), ) and fiber g glass is used to make the p pipe p reinforced
Range g of Products Ash Handling Plant (AHP) Fly Ash Conveying System y
Vacuum Conveying System
y
Dense Phase Pressure Conveying System
y
Dilute Phase Pressure Conveying System
Bottom Ash Conveying System y
Water Impounded Bottom Ash Hopper with Jet Pump
y
Scraper Chain Conveyor
y
Dry Bottom Ash Conveyor
y
Slurry Transport System
y
Lean Concentration Transport System (Centrifugal Slurry Pump)
y
High Concentration Slurry Disposal System
Coal Handling Plant (CHP) y
Common Belt Conveyor
y
Tubular Belt Conveyor
y
Coal Unloading System
y
Coal Conveying System
y
Screening and Crushing System
Mill Reject R j tH Handling dli S System t (MRHS) y
Dry-type Conveying System
y
Pressure Conveying System
y
Vacuum Conveying System
y
Wet-type Conveying System (Hydraulic System)
~Feather On Our Hat~ Typical acheivements: Awarded ISO 9001:2000, ISO14001, OHSAS18001 accreditation and the title of “Shanghai Outstanding Hi-Tech Enterprise” and “AAA Class Credit Enterprise”.
First enterprise in China exporting the whole set of biomass power generation system
In China, Sinofinn is a leading investor and operator in the field of new and clean energy such as thermal power generation, coal refuse power generation and wind energy etc., with the total capacity of the systems under construction and put into operation amounting to 1500MW
Sinofinn has successfully introduced Positive Pressure Dense Phase Pneumatic Conveying Technology from Uni-Energy Oy of Finland. In2001, further improvement was made by developing a safe and reliable new dense phase PD conveyor system suitable for medium-and-long conveying distance from 600m to 1000m
We have become one of the few domestic enterprises to export the whole set of largescale l materials t i l conveying i system. t Last but not last, Sinofinn has emerged as a top class company, worldwide, in the field of materials conveying, especially in unique industries as mill reject handling system and metallurgy etc. metallurgy, etc
Some of our recent successful projects Sasan UMPP, MP, India: Sinofinn was contracted as EPC for Ash Handling Package of India Sasan 6Ă—660MW UMPP. We provide a complete service including engineering design, equipment supply, erection and maintenance. Moreover, Sinofinn will p provide 5-year y operation p service after the p project j starts its commercial running. This is a very important achievement for Sinofinn and further establishes its capability in the market.
Site Picture of Sasan 6*660 UMPP, MP, India
Jharsuguda Power Plant: Sinofinn is the supplier of Ash Handling System for India Jharsuguda 4 600MW Independent 4x600MW I d d t Power P Station, St ti with ith the th design d i handling h dli capacity it of 341t/h for each unit in this project. This is in the state of Orissa, India.
Site Picture of Jharsuguda 4*600MW Power Plant, Orissa , India
National Power Group Penglai Power Plant 2*300MW FGD, Shandong Province, China
Guangxi LaiBin Power Plant 2*300 MW ,Guangxi , China
~TRAINING AND DEVELOPMENT~ •
Sinofinn follows its corporate culture and periodically sends its staff overseas for technical training each year.
•
In July 2001, Sinofinn sent over 20 to MHI (Mitsubishi Heavy Industry) for technical training, including the demonstration of 1:1 scale Absorber Model. Model
•
In December 2004, Sinofinn re-sent personnel to Japan for further technical training, enabling them to gain even better understanding of MHI DCFS technology. In turn Sinofinn applied the same in several practical FGD projects and has today fully grasped its practical functioning. Additionally, Sinofinn has made further advancement of this technology according to China China’s s current need, need making Sinofinn a leader in wet desulphurization technology in China.
•
In October 2006, Sinofinn sent technical personnel to Niro A/S in Denmark twice, for technical training of SDA (Spray Dry Absorbing) FGD technology.
•
In January 2007, Sinofinn sent technical personnel to the Wind Power Research Center of Denmark for training in wind power generation technology.
•
In May y 2008, Sinofinn sent technical personnel to Solent Composite in Britain for training g in wind power generation technology.
~Development Strategy~ * Focusing on the comprehensive utilization of resources as well as the investment and d operation ti for f energy-efficient ffi i t power plants l t such h as combined bi d cooling, li h heatt and d power generation (CCHP), etc. * Focusing on the technical development of future-oriented new energy industries * Focusing on development and manufacturing of high-efficiency integrated technology for large-scale systems related to energy industries
~Key K St Strength~ th
•
Good reputation and objective identification amongst the clients in power & energy industries in China and abroad
•
Huge investment for the supplementation and perfection of new facilities of manufacturing base and R&D Centre
•
Perfect combination of technology acquisition and independent development, development increasingly expanding the scope of application of our technology
•
Reliable, near-perfect operation and popular products and technologies, optimal d i design, strict t i t & hi highly-efficient hl ffi i t process system, t precise i managementt system t
Business Partners o
Mitsubishi Heavy Industries Co., Ltd.
o
POCOTEC Control Technology Ltd.
o
COMPACT Global Power Po er Group Gro p
o
Air Product Inc.
o
GEA Process Engineering A/S
o
Uni- Energy gy Oy y
o
Fortum Oyj
Chairman’s Vision‌‌ Human beings today, are faced with conflicts between limited resources and their everexpanding needs; therefore the development and application of new technologies, is the most effective solution solution. Because of this reason, reason the infrastructure industries with centuries-old working systems are ready to embrace new technologies. With this ideology in mind, Sinofinn is striving to become an influential player in this emerging industry. C pa i with Comparing ith numerous giants ia t in i th the world, ld Si Sinofinn fi maybe a b iis small all iin size, i which hi h however can neither prevent us from achieving our goals in fields of thermal power, new energy and environmental engineering nor deter our continuous endeavor and efforts t towards d this thi di direction. ti Th The smallness ll in i size i iis another th reason why h Si Sinofinn fi would ld lik like tto partner with counterparts sharing a common vision. Sinofinn, without doubt, can prove to be an excellent working partner.
ѝ㣜ᯠ㜭Ⓚ䳶ഒᴹ䲀ޜਨ Sinofinn New Energy Group Co., Ltd.
ൠ ൰˖к⎧ᐲ⎖ь嗉ьབྷ䚃3000ਧᕐ⊏䳶⭥ Address: Zhangjiang Jidiangang, No. 3000 Longdong Avenue, Pudong New Area, Shanghai, P.R.C
ᙫ ᵪ Tel˖021 021-61005858 61005858 䛞 㕆 Post Code ˖201203
Ր ⵏ Fax˖021 021-61009658 61009658
Lookingg Forward for a Longg Term & Mutually Beneficial Business Relationship!