Motorola CODE: MSC-235 Exam Name: Design and Deploy for MOTOTRBO Connect Plus Solutions BETA
Click the link below to buy full version as Low as $39
http://www.testsexpert.com/MSC-235.html
Type
Microsoft
1
IBM
Demo
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
Question: 1 A Request for Proposal (RFP) for a single-site, operations-critical customer requires you to respond to the following requirement: “...if the RF site equipment includes network switches, describe the system behavior in the event of a site LAN switch failure.� Which of the following is the BEST response to this requirement? A. Redundant site networking equipment may be specified and configured so as to negate the impact of a single site LAN switch failure. If redundant networking equipment is not installed,the failure of a site LAN will not affect calls in-progress, but will make it impossible for subscribers to register at the site. B. If the single site LAN switch fails, the site master repeater will begin broadcasting failsoft messages. All subscribers will revert to failsoft operation. The users may select any site repeater on which to communicate conventionally. C. Redundant site networking equipment may be specified and configured so as to negate the impact of a single site LAN switch failure. If redundant networking equipment is not installed, the failure of a site LAN switch will cause all calls to drop and the subscribers will attempt to roam to an operational site. D. In the case of a single-site system, Connect Plus does not utilize site LAN switches.
Answer: C Question: 2 Refer to the exhibit (below).
Microsoft
2
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
Which of the following behaviors will occur on the system if the same Radio ID is assigned to more than one Connect Plus subscriber in the same network? A. One of the radio users will receive an Invalid Talkgroup error. B. One of the radio users will receive an Invalid ESN error and be disabled. C. Radios receiving calls from the duplicate may show an incorrect alias. D. The network will log an error to the error log when the duplicate registers.
Answer: B Question: 3 NOTE: This is a scenario based item associated with an Auto Manufacturer. Please reference the information accessible from the “Auto Manufacturer Scenario� button at the bottom as part of responding to this item.
Microsoft
3
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
Based on the scenario, which of these options is the best way to allow private calling in the proposed Connect Plus system for some users, but not for others? A. Select “PVT Capable” in the Option Board codeplug for the subscribers you wish to have this capability. Leave it unchecked in the other subscribers. B. Enable Private Calls in the main board codeplug for all subscribers and enable/disable this feature for each radio in the Network Manager. C. Select “PVT Capable” in the Network Frequency File for the subscribers you wish to have this capability. Leave it unchecked in the other subscribers. D. Assign the users who are allowed to make/receive private calls to a talkgroup that has this feature enabled. Assign the other users to talkgroups that do not have this feature enabled.
Microsoft
4
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
Answer: B Question: 4 Refer to Exhibit G below.
The MOTOTRBO CPS screen shot in Exhibit G (below) shows a codeplug configuration destined for a Connect Plus subscriber. The person who completed this screen did not follow an important rule for configuring Connect Plus subscribers. Which rule was broken? A. The Channel Pool cannot appear before any Connect Plus zones. B. Each Connect Plus Zone must include 16 identically configured digital channels. C. Non-Connect Plus zones are not allowed in the codeplug. D. The Channel Pool must appear after all zones. E. All Connect Plus channel names must begin with the characters “CP�.
Answer: B Question: 5 Your customer is a rail operator whose system covers approximately 125 kilometers (77 miles) of track. Trains travel rapidly, and the operator is using a location tracking application to update their displayed location as frequently as possible. Location updates are critical, even if this means putting voice calls into the busy queue. What can you do to ensure this behavior?
Microsoft
5
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
A. Make sure that RSSI settings are set to -ll3dBm or less for “RSSI Preferred” in the mobiles in the trains. This will allow the proper sensitivity to make frequent location updates possible. Give individual SU records a lower priority than any talkgroup priority. B. Enhanced GPS must be enabled in the Repeaters and Subscribers. Give individual SU records a higher priority than any talkgroup priority. C. Call Sessions Configuration in the Network Manager should be set to 29 for the “Number of Outbound Data Sessions Allowed” field and somewhat less for the Number of Voice/Inbound Data sessions field. Give individual SU records a higher priority than any talkgroup priority. D. Location updates should be optimized by enabling Advanced GPS with GPS Data Revert channels.
Answer: C Question: 6 NOTE: This is a scenario based item associated with an Oil Corporation. Please reference the information accessible from the “Oil Corporation Scenario” button at the bottom as part of responding to this item.
Microsoft
6
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
Which of the following are Connect Plus feature(s) and should be specified in order to meet the requirement for maximum availability/redundancy and fault tolerance? A. Multiple Control Channel-Capable repeaters at every site B. Redundant site controller at primary site C. Redundantsite routers D. Redundant site links
Answer: C Question: 7 You are using the Network Manager to connect to a multisite system. Where can you view the current state of connections to other sites in this multisite system?
Microsoft
7
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
A. Event Log Viewer B. RealTime Display C. Site Status Window D. MultiSite Configuration Window
Answer: C Question: 8 Your customer operates a 4-site Connect Plus network. Two sites are adjacent to each other, with overlapping coverage. The other two sites respectively service two manufacturing plants that are approximately 900 kilometers (559 miles) apart. There are approximately 30 talkgroups in the network and 300 subscribers. When creating the Option Board codeplug for this customer’s portable radios, which of the following is the best strategy to ensure smooth, logical operation? A. Create a separate zone for each of the 4 sites to contain all the necessary contact and RSSI settings. B. Create a single Connect Plus zone that will address all of their necessary RSSI settings and contact lists. C. Create 2 Connect Plus zones to contain the different contacts and RSSI settings necessary with this type of topology. D. Create 3 separate Connect Plus zones to contain the different contacts and RSSI settings necessary with this type of topology.
Answer: D Question: 9 If there is a failure or reboot of a site controller, which of the following must you consider regarding Over The Air (OTA) file transfers (select TWO)? A. Any transfers in progress at the time of the failure may have to be repeated. B. The controller will have to be re-entitled for OTA operation after it is back online. C. If the site controller recovers on a different Control Channel, transfers may have to be reconfigured. D. Any pending transfers on that controller will be lost and must be re-queued.
Answer: A,D Question: 10 You are designing a 3 site Connect Plus system with 12 repeaters per site, no site controller redundancy, and 3
Microsoft
8
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
control channel-capable repeaters at each site. The average number of subscribers active at a site may approach 300 at any given time of the day. If this customer experiences a site controller failure, what symptoms and subscriber behavior would you expect immediately after the failure occurs? A. All calls in progress at the site will drop. Subscribers will automatically fall back to digital conventional, allowing users to utilize any of the site’s repeaters. B. All calls in progress at the site will drop. All subscribers will attempt to roam to one of the other sites. C. Calls in progress will remain until one of the other control-channel capable repeaters assumes the site controller’s role and then they will drop and register on the new controller. D. Calls in progress will stay up until they complete normally. Subscribers on the control channel will attempt to roam to one of the other sites.
Answer: B
Microsoft
9
IBM
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec
Motorola CODE: MSC-235 Exam Name: Design and Deploy for MOTOTRBO Connect Plus Solutions BETA
Click the link below to buy full version as Low as $39
http://www.testsexpert.com/MSC-235.html Microsoft
Cisco
IBM
HP
Other
MCTS 70-336 70-337
CCNA 640-911 642-998 642-997 642-902
IBM Lotus
00M-244 000-M60
AIS
MBS 70-332
CCNP 642-832 642-813 642-825 642-845
LOT-442 000-M44
MCAS 77-602
CCSP 642-627 642-637 642-647 642-545
000-444 000-910
MCSE 70-281 70-282
CCIE 350-001 350-018 350-029 350-060
COG-105 COG-185
MCSA 2003 70-620
DATA CENTER 642-972 642-973 642-974 642-975
000-005 000-032
70-323 9L0-063 9L0-010 9L0-517 HP2-E53 70-321 650-179 E20-533 00M-646 MB2-876 646-206 9L0-412 MB6-884 220-701 650-196 3305 MB6-871 HP2-Z22 9L0-518 9A0-146 HP2-H23 000-184 1Z0-527 HP2-B91 000-781 M70-201 N10-004 7004 HP3-X11 312-50v8
70-462
98-361
MB3-861
77-601 77-604 70-284
70-461 70-680
70-463
MB3-862
77-605 70-285
70-291
Microsoft
10
IBM
LOT-403 000-M62
IBM Mastery
000-M43 000-M45
HP0-311
HP0-M28
HP0-A25
HP0-M30
APC
HP2-K10 HP2-B93
HP0-M98 HP0-H22
Solutions Expert
MASE HP0-J33 HP0-M48 HP0-M49 HP0-M50
IBM Cognos
ASE
000-640 000-913 COG-180 COG-200
IBM Specialist
000-015 000-042
HP0-066 HP0-781
HP0-082 HP0-782
CSE
HP0-090 HP0-277
HP0-276 HP0-760
HP Cisco Oracle Instant download after purchase
http://www.testsexpert.com/MSC-235.html
Symantec