Wall Lights by Collingwood Lighting
Mastering light together collingwoodlighting.com
WALL LIGHTS To create secure and adventurous spaces
CHOOSE YOUR EFFECT & HOW TO CREATE IT Highlight a great piece of architecture or illuminate an entrance with Collingwood wall lights. The images below illustrate how your choice of lighting creates different effects.
Choose your effect
Create the effect using...
WL07 70A
WL07 75A
MC050
This up / down light produces a narrow and concentrated beam of light upwards and downwards. Best where there is more height for you to appreciate the full effect of the columns of light, these fittings are great for framing doors and windows.
The narrow, intense beam of this wall light will enhance the texture of the surface upon which it is mounted. It works very well on uneven stone and provides plenty of contrast between areas of light and shade.
If you want to mix practicality with a touch of drama, this fitting does the job. Its wide-angle downwards beam lights a broad area while the narrow flume of up-light creates visual interest and adds a touch of glamour.
200-300mm
POSITIONING OF LIGHTS
less than 200mm
1650mm
A general guide for the height of wall lights is 1650mm from floor / ground level (roughly eye level to a person of 5ft 8in).
132
To avoid hot spots when using up / down lights to frame doors and windows with attractive columns of light, ensure they are not positioned too close to the ceiling or other horizontal surfaces.
To light pathways and steps mount these wall fittings 200-300mm above surface level to spread light across the step or path.
SIZE COMPARISON 1. WL339 / 340 / 341 / 342 Page 134-135
7. WL060 / 160 Page 141
13. WL80 Page 147
19. MF02 IP / MS02 IP Page 153-154
2. GL034A Page 136
8. OCTOLED Page 142
14. WL050 Page 148
20. ML01 Page 156
3. GL021 / 22 Page 137
9. WL240A F / 140A F Page 143
15. MC025 S Page 152
21. ML02 Page 157
4. WL070A / 170A / 370A Page 138
10. WL220A MAINS Page 144
16. MC015 S Page 152
22. ML03 Page 158
379mm
5. WL075A / 175A Page 139
11. WL220A / 020ABLK / 320AF Page 145
17. MC020 S Page 150
23. WL261 / 262 Page 159
300mm
6. MC040 / 050 Page 140
12. WL041IP Page 146
18. MC010 S Page 151
24. WL92 Page 160-161
217mm 120mm 78.5mm
0mm
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15
16
17 18 19 20 21 22
23
24
MICROWAVE SENSORS Check out our wall light comparison video on the Collingwood Lighting YouTube channel or call 01604 495 151 to speak to our design team.
Microwave sensors send out microwave pulses, these bounce off of nearby objects, measuring the reflections.
When a moving object enters the area the sensor receives a new reflection, which trips the sensor and turns on the light.
MC040
WL060
This clean, contemporary looking fitting provides a broad spread of light. It is great for lighting the threshold of any doorway and providing some general illumination as well as highlighting plants below.
This fitting provides a diffused decorative light from its top, and a broad spread of down-light which will light the threshold of your doorway. Ensuring both comfort and safety, as well as highlighting any pots or planting positioned below.
LOW GLARE HOODS & SNOOTS Upgrade the look and feel of your wall light installation with a simple low glare hood or low glare snoot accessory.
Stan ndarrd wall light
Low w glare e ho ood
Low w gllare e snoot
Flexible wall lighting from a high-quality fixture you can trust
Simple low glare accessory creating discreet lighting whilst optimising the light distribution
A chic low glare accessory which elevates the style factor. Perfect for creating a moonlight effect
133
WALL L LIGHTS S SPECIFICATION SHEET
WL339
WL340
FE EAT TUR RES S& BENEFIITS Recessed, asymmetric wall or ground light perfect for illuminating walls, steps and pathways Straight to mains for easy retrofit Available in rustic cast stainless steel and sleek brushed stainless steel finishes Installation tube included
WL339 WL340
Asymmetric, straight to mains, cast finish step light Asymmetric, straight to mains, brush finish step light
Protected against temporary immersion
IP67
2.6W
50°
7-year extended warranty available
Walk over
240V
Ø80
1kg
30°C
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
50°
WL339NW
>70Ra
59
22
65
50°
WL340NW
>70Ra
59
22
65
50°
WL339WW
>80Ra
50
19
54
50°
WL340WW
>80Ra
50
19
54
2700K NEW
50°
WL33927*
>80Ra
49
19
52
NEW
50°
WL34027*
>80Ra
49
19
52
4000K
3000K
*Available on request, please call our team for lead times and MOQ on 01604 495 151
GENERAL Construction material
Stainless steel 316
Inrush current
9A 0.8ms 500 1000
WIRING Cable / flying lead
1m (H05RN-F) rubberised cable (outside diameter: 7mm)
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
1500 cd / klm
40 000 0K 50° C0//C1 180 / 4000K 50° C90/C270
LED DRIVERS
Additional diagrams available at collingwoodlighting.com
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
Ø98mm 58/190mm
ACCESSORIES Description
1m
ode Product co Installation tube included JB5
Gel filled waterproof connector
297
WC 5-9
Quick release waterproof joint
296
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
134 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
WL341
WL342
FE EAT TUR RES S& BENEFIITS Can be used as a wall light or ground light Straight to mains for easy installation Installation tube included 1m H05RN-F rubber cable attached for permanent use outdoors
WL341 WL342
Asymmetric, straight to mains, cast finish step light Asymmetric, straight to mains, brush finish step light
Protected against temporary immersion
IP67
2.6W
50°
7-year extended warranty available
Walk over
240V
Ø80
1kg
30°C
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
50°
WL341NW
>70Ra
59
22
65
50°
WL342NW
>70Ra
59
22
65
50°
WL341WW
>80Ra
50
19
54
50°
WL342WW
>80Ra
50
19
54
2700K NEW
50°
WL34127*
>80Ra
49
19
52
NEW
50°
WL34227*
>80Ra
49
19
52
4000K
3000K
*Available on request, please call our team for lead times and MOQ on 01604 495 151
GENERAL Construction material
Stainless steel 316
Inrush current
9A 0.8ms 500 1000
WIRING Cable / flying lead
1m (H05RN-F) rubberised cable (outside diameter: 7mm)
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
1500 cd / klm
40 000 0K 50° C0//C1 180 / 4000K 50° C90/C270
LED DRIVERS
Additional diagrams available at collingwoodlighting.com
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
98x98mm 58/190mm
ACCESSORIES Descriptiion
1m
ode Product co Installation tube included JB5
Gel filled junction box
297
WC 5-9
Quick release waterproof joint
296
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 135
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Recessed light for wall or ground mounting with built in hood to minimise glare High quality stainless steel finish Straight to mains for easy installation and retrofitting
GL034A
Straight to mains hooded LED wall / ground light
IP67
Protected against temporary immersion
7-year extended warranty available
*
38°
3.6W
240V
Ø80-85
* without the installation sleeve = 80mm cut-out with the installation sleeve = 85mm cut-out
IK08
40°C
1kg
ZONE
Patent information: collingwoodlighting.com/patent
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
38°
GL034A NW
>70Ra
193
54
478
3000K
38°
GL034A WW
>80Ra
121
34
186
2700K NEW
38°
GL034A 27
>80Ra
118
33
181
GENERAL Construction material
Stainless steel 316 (top) / aluminium (body)
Inrush current
9A 0.8ms
WIRING Cable / flying lead
1m (H05RN-F) rubberised cable (outside diameter: 7mm)
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
1000 2000 3000 4000
LED DRIVERS
cd / klm
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
40 000 0K 38° C0//C1 180 0 / 4000K 38° C90/C270 Additional diagrams available at collingwoodlighting.com
ACCESSORIES Product co ode
Ø98mm
Description
83/190mm
Installation tube included Gel filled junction box
297
Quick release waterproof joint
296 1m
JB5 WC 5-9
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
136 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
GL021
GL022
FE EAT TUR RES S& BENEFIITS Angled light ideal for use as a step light Cast Stainless steel for aged effect (GL022) Robust cable for outdoor use
GL021 GL022
30° slotted LED ground light Square 30° slotted LED ground light
Submersible to 9m
IP68
1W
30°
7-year extended warranty available
Walk over
Ø50
37°C
IK07
400g
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
30°
GL021 NW
>70Ra
10
10
10
30°
GL022 NW
>70Ra
10
10
10
30°
GL021 WW
>80Ra
8
8
8
30°
GL022 WW
>80Ra
8
8
8
2700K NEW
30°
GL021 27*
>80Ra
8
8
7
NEW
30°
GL022 27*
>80Ra
8
8
7
30°
GL021 BLUE
-
-
-
-
30°
GL022 BLUE
-
-
-
-
4000K
3000K
Blue
*Available on request, please call our team for lead times and MOQ on 01604 495 151
GENERAL Construction material
Stainless steel (316)
Drive over / walk over
Walk over
250 500 750 1000 cd / klm
WIRING Cable / flying lead
1m (H05RN-F) rubberised cable (outside diameter: 6mm)
Type of wiring required
Series
30 000 0K C0/C C18 80 / 3000K C90/C270 Additional diagrams available at collingwoodlighting.com
5
LED DRIVERS
Bathroom zone applicable to fitting only
Ø60mm / 60x60mm
Product co ode
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
9
PLR/350 1-5
350
Yes
No
0
1
5
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
10
43mm
4 3 2 1 0
1m
For LED driver bathroom zone & additional LED drivers see page 304
ACCESSORIES Product co ode
Descriptiion
JB2 / JB4 / JB6
IP68 waterproof connectors
TUBE/50
Installation tube
131
WCR 275 BLACK
2-core rubber cable
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
296-297 This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 137
WALL L LIGHTS S SPECIFICATION SHEET
WL070A
WL170A
WL370A
FE EAT TUR RES S& BENEFIITS Bi-directional, straight to mains wall light, perfect for framing entrances and illuminating columns Equivalent to 35W halogen Solid copper option gradually ages over time to offer a wonderful antique effect
WL070A WL170A WL370A Straight to mains, up / down LED wall light
Suitable for use outdoors
IP65
8W
18°
7-year extended warranty available
240V
Also available in RGBW (WL070A) See page 264
W
39°C
1kg
2.5kg
WL070A / WL170A
WL370A
31°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
18°
WL070A NW
>70Ra
472† 236‡
59
1000
18°
WL170A NW
>70Ra
472† 236‡
59
1000
18°
WL370A NW
>70Ra
472† 236‡
59
1000
18°
WL070A WW
>80Ra
400† 200‡
50
900
18°
WL170A WW
>80Ra
400† 200‡
50
900
18°
WL370A WW
>80Ra
400† 200‡
50
900
2700K NEW
18°
WL070A 27*
>80Ra
390†
49
875
NEW
18°
WL170A 27*
>80Ra
390†
24
875
NEW
18°
WL370A 27*
>80Ra
390†
24
875
4000K
3000K
6000 cd / klm 4000 2000
*Available on request, please call our team for lead times and MOQ on 01604 495 151 † Combined total from both sets of LED | ‡ Per module
GENERAL Construction material
WL070A / WL170A: anodised aluminium
Inrush current
5A 0.5ms
WL370A: copper
WIRING
40 000 0K 18°
Cable / flying lead
0.3m Live, Neutral & Earth
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
Additional diagrams available at collingwoodlighting.com
15
13 12
LED DRIVERS
120mm
128mm 60mm
14
11 10
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
9 8 7
5
3
ACCESSORIES
2
Ø80mm
6
4
1
Product co ode
Description
0
There are currently no accessories associated with this product
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
138 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
WL075A
WL175A
FE EAT TUR RES S& BENEFIITS High output, narrow beam wall light perfect for creating a high contrast lit effect Complete with wall fixings and waterproof crimp connectors Equivalent to 35W halogen
WL075A WL175A
Straight to mains, high output LED wall light
Suitable for use outdoors
IP65
8W
18°
7-year extended warranty available
240V
Also available in RGB (WL075A) See page 265
40°C
1.2kg
<35°C
ZONE
Patent information: collingwoodlighting.com/patent
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
18°
WL075A NW
>70Ra
414
52
4680
18°
WL175A NW
>70Ra
414
52
4680
18°
WL075A WW
>80Ra
330
41
4440
18°
WL175A WW
>80Ra
330
41
4440
2700K NEW
18°
WL175A 27*
>80Ra
320
40
4316
NEW
18°
WL075A 27*
>80Ra
320
40
4316
4000K
3000K
9000 cd / klm
*Available on request, please call our team for lead times and MOQ on 01604 495 151
6000
GENERAL
3000
Construction material
Anodised aluminium
Inrush current
15A 0.5ms
WIRING Cable / flying lead
0.3m Live, Neutral & Earth
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz 4000 0K 18°
LED DRIVERS
Additional diagrams available at collingwoodlighting.com
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
Yes
2
-
13
144mm 80mm
12 11
ACCESSORIES
104mm
10 9 8
Description
7 6
There are currently no accessories associated with this product
5 4 3
Ø80mm
ode Product co
2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 139
WALL L LIGHTS S SPECIFICATION SHEET
MC050
MC040
FE EAT TUR RES S& BENEFIITS Complete with wall fixings and waterproof crimp connectors Integral LED light for decorative effect (MC050) Equivalent to 35W halogen
MC040 MC050
Straight to mains LED wall light Straight to mains LED wall light with decorative effect
Suitable for use outdoors
IP65
5W 6.5W
110°
7-year extended warranty available
240V
900g
<40°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
W
CRI
lm
lm/W
lx at 1m
110°
MC040 NW
5
>70Ra
312
62
163
110°
MC050 NW
6.5
>70Ra
312
48
163
110°
MC040 WW
5
>80Ra
243
48
118
110°
MC050 WW
6.5
>80Ra
243
37
118
2700K NEW
110°
MC040 27*
5
>80Ra
236
47
158
NEW
110°
MC050 27*
6.5
>80Ra
236
36
158
4000K
3000K
600 cd / klm
*Available on request, please call our team for lead times and MOQ on 01604 495 151
400
GENERAL
200
Construction material
Anodised aluminium
Inrush current
9A 0.8ms
WIRING Cable / flying lead
0.3m Live, Neutral & Earth
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz MC040 400 00K 11 10°°
LED DRIVERS
Additional diagrams available at collingwoodlighting.com
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
15 14 13 12 11 10
ACCESSORIES
156mm
9
ode Product co
Description
There are currently no accessories associated with this product
Ø80mm
8 7 6 5 4 3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
140 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
WL060
WL160
FE EAT TUR RES S& BENEFIITS Bi-directional wall light offering decorative halo effect and functional downward flood light Straight to mains Complete with wall fixings and waterproof crimp connectors
WL060 WL160
Straight to mains LED halo / flood wall light
Suitable for use outdoors
IP65
2.6W
110°
7-year extended warranty available
240V
40°C
600g
<40°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
110°
WL060 NW
>70Ra
82
32
46
110°
WL160 NW
>70Ra
82
32
46
110°
WL060 WW
>80Ra
58
22
26
110°
WL160 WW
>80Ra
58
22
26
2700K NEW
110°
WL160 27*
>80Ra
56
22
25
NEW
110°
WL060 27*
>80Ra
56
22
25
4000K
3000K
2000 cd / klm
*Available on request, please call our team for lead times and MOQ on 01604 495 151
1500 1000
GENERAL 500
Construction material
Anodised aluminium
Inrush current
9A 0.8ms
WIRING Cable / flying lead
0.3m Live, Neutral & Earth
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz 4000 0K 110°°
LED DRIVERS
Additional diagrams available at collingwoodlighting.com
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
16
115mm
15 14
130mm
13 12 11
ACCESSORIES ode Product co
10 9
Description
8 7 6 5 4 3 2 1
Ø80mm
There are currently no accessories associated with this product
0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 141
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Grazes light across the surrounding surface in four directions to create a decorative lit effect Can be rotated to direct light in desired direction Complete with wall fixings
OCTOLED
Rotatable, octagonal LED wall light
IP65
Suitable for use outdoors
12°
4W
7-year extended warranty available
350°
700g
30°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
12°
OCTOLEDNW
>70Ra
280
70
1485†
3000K
12°
OCTOLEDWW
>80Ra
220
55
1466†
2700K NEW
12°
OCTOLED27*
>80Ra
214
54
1425†
*Available on request, please call our team for lead times and MOQ on 01604 495 151 † From four sides
GENERAL Construction material
Anodised aluminium
6000 cd / klm 4000
WIRING 2000
Cable / flying lead
0.05m (0.205mm2 red & black PTFE)
Type of wiring required
Series
LED DRIVERS
Bathroom zone applicable to fitting only
Product co ode
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
2
PLR/350 1-5
350
Yes
No
1
1
1
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
2
40 000 0K 12° Additional diagrams available at collingwoodlighting.com
For LED driver bathroom zone & additional LED drivers see page 290-295
ACCESSORIES
12 11
Description
10 9
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
8 7 6
38mm Ø100mm
ode Product co
5 4 3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
142 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
WL140A F
WL240A F
FE EAT TUR RES S& BENEFIITS Equivalent to 50W halogen Complete with wall fixings and waterproof crimp connectors Adjustable angle to direct light Cowl design to reduce glare Suitable for indoor and outdoor use
WL140A F WL240A F Straight to mains LED wall light
Suitable for use outdoors
IP65
8W
38°
7-year extended warranty available
240V
90°
350°
700g
36°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
38°
WL140AFNW
>70Ra
520
65
1471
38°
WL240AFNW
>70Ra
520
65
1471
38°
WL140AFWW
>80Ra
413
52
1168
38°
WL240AFWW
>80Ra
413
52
1168
2700K NEW
38°
WL140A F 27*
>80Ra
400
50
1135
NEW
38°
WL240A F 27*
>80Ra
400
50
1135
4000K
3000K
3000 cd / klm
*Available on request, please call our team for lead times and MOQ on 01604 495 151
2000
GENERAL
1000
Construction material
Anodised aluminium
Inrush current
15A 0.5ms
WIRING Cable / flying lead
0.3m Live, Neutral & Earth
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz 4000 0K 38°
LED DRIVERS
Additional diagrams available at collingwoodlighting.com
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
Yes
2
-
13 12
ACCESSORIES
11 10
Description
208mm
9 8
Ø80mm
ode Product co
7
There are currently no accessories associated with this product
6 5 4 3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 143
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Equivalent to 20W halogen Complete with wall fixings and waterproof crimp connectors Adjustable angle to direct light Suitable for indoor and outdoor use
WL220A MAINS Straight to mains LED wall light
IP65
Suitable for use outdoors
18 38°
3.6W
3-year extended warranty available
90°
240V
330°
1kg
40°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour 4000K
3000K
Product code
CRI
lm
lm/W
lx at 1m
38°
WL220A MAINS F NW
>70Ra
310
86
705
18°
WL220A MAINS S NW
>70Ra
310
86
2823
38°
WL220A MAINS F WW
>80Ra
265
74
602
18°
WL220A MAINS S WW
>80Ra
265
74
2413
GENERAL Construction material
Anodised aluminium
Inrush current
9A 0.8ms
10000 cd / klm 7500 5000 2500
WIRING Cable / flying lead
0.3m Live, Neutral & Earth
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
LED DRIVERS Product co ode
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
40 000 0K 18° / 4000K 38° Additional diagrams available at collingwoodlighting.com
ACCESSORIES Product co ode
Description
13 12 11
There are currently no accessories associated with this product
165mm
10 9
Ø80mm
8 7 6 5 4 3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
144 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
WL220A
WL020A BLK
WL320A
FE EAT TUR RES S& BENEFIITS Equivalent to 20W halogen Complete with wall fixings Adjustable angle to direct light Copper for antique effect (WL320A) Suitable for indoor and outdoor use
WL220A WL020A BLK WL320A LED wall light
IP65
Suitable for use outdoors
18 38°
3W
3-year extended warranty available
90°
330°
Also available in RGB (WL220A / WL020A) See page 266
1kg
1.4kg
WL220A / WL020A
WL320A
40°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour 4000K
3000K
38°
Product code
CRI
lm
lm/W
lx at 1m
WL220A F NW
>70Ra
310
103
705
18°
WL220A S NW
>70Ra
310
103
2823
38°
WL020A BLK F NW
>70Ra
310
103
705
18°
WL020A BLK S NW
>70Ra
310
103
2823
38°
WL320A F NW
>70Ra
310
103
705
38°
WL220A F WW
>80Ra
265
88
602
18°
WL220A S WW
>80Ra
265
88
2413
38°
WL020A BLK F WW
>80Ra
265
88
602
18°
WL020A BLK S WW
>80Ra
265
88
2413
38°
WL320A F WW
>80Ra
265
88
602
10000 cd / klm 7500 5000 2500
GENERAL Construction material
WL220A / WL020A: Anodised aluminium
WL320A: Copper
WIRING Cable / flying lead
0.05 (0.205mm2 red & black PTFE)
Type of wiring required
Series
40 000 0K 18° / 4000K 38° Additional diagrams available at collingwoodlighting.com
LED DRIVERS
Bathroom zone applicable to fitting only 13
Product co ode
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
3
PLR/350 1-5
350
Yes
No
1
1
1
12 11
145mm
10 9
Ø80mm
8 7 6 5
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
4
3
3 2
For LED driver bathroom zone & additional LED drivers see page 290-295
1 0
ACCESSORIES ode Product co
Descriptiion
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 145
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Unique radial appearance creates a decorative lit effect on surrounding surfaces Can be used for interior and exterior applications Straight to mains for easy installation Complete with bracket and waterproof crimp connectors
WL041IP
Straight to mains, fan effect LED wall light
IP65
Suitable for use outdoors
1.6W
240V
7-year extended warranty available
300g
29°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
-
WL041 IP NW
>70Ra
37
23
8
3000K
-
WL041 IP WW
>80Ra
33
21
6
2700K NEW
-
WL041 IP 27*
>80Ra
32
20
6
Amber
-
WL041 IP AMBER
-
-
-
-
Blue
-
WL041 IP BLUE
-
-
-
-
*Available on request, please call our team for lead times and MOQ on 01604 495 151
600 cd / klm
GENERAL
400
Construction material
Anodised aluminium
Inrush current
9A 0.8ms
200
WIRING Cable / flying lead
0.3m Live, Neutral & Earth
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
LED DRIVERS
40 000 0K
ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
2
-
-
Additional diagrams available at collingwoodlighting.com
11 10
Ø90mm
ACCESSORIES Product co ode
60mm
9 8
Description
7 6
There are currently no accessories associated with this product
5 4 3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
146 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
120°
FE EAT TUR RES S& BENEFIITS Tiltable LED wall light Direct light towards the ceiling to flood the room with light Direct light towards the floor for low level lighting Direct light evenly up and down
WL80
Straight to mains, tiltable LED wall light
IP20
Suitable for use indoors
7.1W
5.4W
4000K
3000K
3 yr
3-year guarantee
240V
120°
40°C
30,000h
500g
25°C
PHOTOMETRICS @ 25°C Colour
Product code
W
CRI
lm
lm/W
lx at 1m
4000K
Adjustable
WL80GX0X40
7.1
>85Ra
385*
54
49†
3000K
Adjustable
WL80GX0X30
5.4
>85Ra
325*
60
49†
* Combined total from both sets of LED | † Per module
GENERAL Construction material
Aluminium
Inrush current
0.7A, 0.025ms
WIRING Cable / flying lead
-
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz 100 200
LED DRIVERS Product co ode
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
-
-
40 000 0K C0/C C18 80 / 4000K C90/C270
ACCESSORIES Product co ode
300 cd / klm
Additional diagrams available at collingwoodlighting.com
Descriptiion 18
There are currently no accessories associated with this product
75mm
17 16
155mm
15 14 13 12 11 10 9
7 6 5 4
90mm
8
3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 147
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Plug & Play connector for quick installation Wall box available
WL050
LED wall / step light
IP20
Suitable for use indoors
84°
1W
1yr
1-year guarantee
77x77
50,000h
100g
28°C
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
84°
WL050 NW
>80Ra
62
52
23
3000K
84°
WL050 WW
>80Ra
29
24
13
2700K NEW
84°
WL050 27*
>80Ra
28
23
13
Blue
84°
WL050 BLUE
-
-
-
-
*Available on request, please call our team for lead times and MOQ on 01604 495 151
GENERAL Construction material
1200 cd / klm
Aluminium
800 400
WIRING Cable / flying lead
0.3m (0.205mm2 red & black PTFE)
Type of wiring required
Series (Plug & Play) NB: Removal of plugs will render this product non-returnable
LED DRIVERS ode Product co
mA
SELV
Dimming
Bathrroom zone
Min
PLU/PP/350 1-9 (Plug & Play)
350
Yes
No
-
1
Max 9
PLR/350 1-5
350
Yes
No
-
1
5
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
-
1
10
40 000 0K 84° C0//C1 180 / 4000K 84° C90/C270 Additional diagrams available at collingwoodlighting.com
11
For additional LED drivers see page 290-295
10
37mm
ACCESSORIES
90x90mm
9 8
ode Product co
Description
WL050 WALL BOX
Wall box for WL050
7 6
149
5 4
LED LYTE 1M EXT
1m Plug & Play extension lead
231
LED LYTE 6 WAY EXT
6-way 1m Plug & Play extension lead
231
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
148 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Wall box does not contain an earth terminal, therefore you should not place LED driver into bottom of unit
14
WL050 WALL BOX
13
83mm
66mm
12
Wall box for WL050
9 8 7
115mm
11 10
6 5 4 3 2
IP20
Suitable for use indoors
1yr
1
1-year guarantee
0
77x77
PRODUCT DATA Product code
WL050 WALL BOX
GENERAL Construction material
Steel
USE IN CONJUNCTION WITH ode Product co
Description
WL050
LED wall / step light
Join us on social media
148
collingwoodlighting.com 149
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Bi-directional mini cube for discreet accent lighting of interior and exterior spaces Bespoke wall plug for easy installation Quality brushed aluminium finish Requires 20mm drill bit
MC020 S
Up / down mini cuboid LED wall light
IP65
Suitable for use outdoors
12°
2W
7-year extended warranty available
360°
Ø20
150g
39°C
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
12°
MC020 S NW
>70Ra
140
70
1485
3000K
12°
MC020 S WW
>80Ra
110
55
1466
2700K NEW
12°
MC020 S 27*
>80Ra
107
54
1425
Amber
12°
MC020 S AMBER
-
-
-
-
Blue
12°
MC020 S BLUE
-
-
-
-
Green
12°
MC020 S GREEN
-
-
-
-
Red
12°
MC020 S RED
-
-
-
-
9000 cd / klm 6000
*Available on request, please call our team for lead times and MOQ on 01604 495 151
3000
GENERAL Construction material
Anodised aluminium
WIRING Cable / flying lead
0.15m (0.205mm2 red & black PTFE)
Type of wiring required
Series 40 000 0K 12° Bathroom zone applicable to fitting only
Additional diagrams available at collingwoodlighting.com
Product co ode
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
4
7
PLR/350 1-5
350
Yes
No
1
1
2
6
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
5
5 4
33x33/29.5mm 58mm
LED DRIVERS
For LED driver bathroom zone & additional LED drivers see page 290-295 3
ACCESSORIES
2
Product co ode
Description
CR135
PTFE cable
1
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
UY2 CONNECTOR
Quick waterproof connector
296
0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
150 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Mini cube spot light for discreet accent lighting of interior and exterior spaces Bespoke wall plug for easy installation Quality brushed aluminium finish Requires 20mm drill bit
MC010 S
Mini cube LED wall light
IP65
Suitable for use outdoors
12°
1W
7-year extended warranty available
Ø20
360°
100g
34°C
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
12°
MC010 S NW
>70Ra
70
70
1485
3000K
12°
MC010 S WW
>80Ra
55
55
1466
2700K NEW
12°
MC010 S 27*
>80Ra
53
53
1425
Amber
12°
MC010 S AMBER
-
-
-
-
Blue
12°
MC010 S BLUE
-
-
-
-
Green
12°
MC010 S GREEN
-
-
-
-
Red
12°
MC010 S RED
-
-
-
-
4000K
9000
cd / klm
6000
*Available on request, please call our team for lead times and MOQ on 01604 495 151
3000
GENERAL Construction material
Anodised Aluminium
WIRING 0.15m (0.205mm2 red & black PTFE)
Type of wiring required
Series
LED DRIVERS
Bathroom zone applicable to fitting only
Product co ode
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
9
PLR/350 1-5
350
Yes
No
1
1
5
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
10
40 000 0K 12° Additional diagrams available at collingwoodlighting.com
5
For LED driver bathroom zone & additional LED drivers see page 290-295
ACCESSORIES
3 2
ode Product co
Description
33x33/29.5mm
4
1
CR135
PTFE cable
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
UY2 CONNECTOR
Quick waterproof connector
296
33x33mm
Cable / flying lead
0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 151
WALL L LIGHTS S SPECIFICATION SHEET
MC015 C015 S
MC025 S
FE EAT TUR RES S& BENEFIITS Straight to mains mini cube spot lights for discreet accent lighting of interior spaces. Quality brushed aluminium finish Complete with wall fixings and waterproof crimp connectors Pattress box included
MC015 S MC025 S
Straight to mains mini LED cube wall light Straight to mains, up / down mini LED cube wall light
Suitable for use indoors
IP20
7-year extended warranty available
1.5W
2.3W
MC015
MC025
12°
240V
38°C
30°C
MC015
MC025
200g
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
W
CRI
lm
lm/W
lx at 1m
12°
MC015 S NW
1.5
>70Ra
70
47
1485
12°
MC025 S NW
2.3
>70Ra
140
61
1485
12°
MC015 S WW
1.5
>80Ra
55
37
1466
2700K NEW
12°
MC015 S 27*
1.5
>80Ra
53
35
1425
NEW
12°
MC025 S 27*
2.3
>80Ra
107
47
1425
4000K
3000K
*Available on request, please call our team for lead times and MOQ on 01604 495 151
9000 cd / klm
GENERAL
6000
Construction material
Anodised aluminium
Inrush current
9A 0.8ms
3000
WIRING Cable / flying lead
-
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
LED DRIVERS ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
-
-
-
MC025 S 40 000 0K 12 2° Additional diagrams available at collingwoodlighting.com
11 10
ACCESSORIES
36/35mm 90mm
9 8
Product co ode
Description
7 6
There are currently no accessories associated with this product
5 4 3 2 1 0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
152 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Mini spot light for discreet illumination Can be used for interior and exterior applications Can be rotated and angled to direct light
MF02 IP
Adjustable LED mini light
IP65
Suitable for use outdoors
16°
1W
7-year extended warranty available
360°
45°
90g
<35°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
16°
MF02 IP NW
>70Ra
66
66
452
3000K
16°
MF02 IP WW
>80Ra
53
53
252
2700K NEW
16°
MF02 IP 27*
>80Ra
52
52
245
Amber
16°
MF02 IP AMBER
-
-
-
-
Blue
16°
MF02 IP BLUE
-
-
-
-
Green
16°
MF02 IP GREEN
-
-
-
-
Red
16°
MF02 IP RED
-
-
-
-
8000 cd / klm 6000 4000
*Available on request, please call our team for lead times and MOQ on 01604 495 151
2000
GENERAL Construction material
Stainless steel (316)
WIRING Cable / flying lead
0.15m (0.205mm2 red & black PTFE)
Type of wiring required
Series
LED DRIVERS
Bathroom zone applicable to fitting only
40 000 0K 16° Additional diagrams available at collingwoodlighting.com
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
9
5
PLR/350 1-5
350
Yes
No
1
1
5
4
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
10
3
For LED driver bathroom zone & additional LED drivers see page 290-295
2
ACCESSORIES Product co ode
Descriptiion
WB/M 01 / WB/M 02
Single bracket / double bracket
1
155
CR135
PTFE cable
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
UY2 CONNECTOR
Quick waterproof connector
297
35mm
Ø30mm
mA
38.5mm
Product co ode
0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 153
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Mounting plates available Can be rotated and angled to direct light
MS02 IP
Adjustable LED mini light
IP65
Suitable for use outdoors
12°
1W
7-year extended warranty available
360°
45°
90g
<35°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
12°
MS02 IP NW
>70Ra
73
73
2160
3000K
12°
MS02 IP WW
>80Ra
50
50
2000
2700K NEW
12°
MS02 IP 27*
>80Ra
49
49
1944
Amber
12°
MS02 IP AMBER
-
-
-
-
Blue
12°
MS02 IP BLUE
-
-
-
-
Green
12°
MS02 IP GREEN
-
-
-
-
Red
12°
MS02 IP RED
-
-
-
-
21000 cd / klm 14000
*Available on request, please call our team for lead times and MOQ on 01604 495 151
7000
GENERAL Construction material
Stainless steel (316)
WIRING Cable / flying lead
0.15m (0.205mm2 red & black PTFE)
Type of wiring required
Series
LED DRIVERS
Bathroom zone applicable to fitting only
40 000 0K 12° Additional diagrams available at collingwoodlighting.com
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
9
5
PLR/350 1-5
350
Yes
No
1
1
5
4
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
10
3
For LED driver bathroom zone & additional LED drivers see page 290-295
2
ACCESSORIES Product co ode
Description
WB/M 01 / WB/M 02
Single bracket / double bracket
1
155
CR135
PTFE cable
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
UY2 CONNECTOR
Quick waterproof connector
297
35mm
Ø30mm
mA
38.5mm
Product co ode
0
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
154 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
WB/M 01
WB/M 02
Bracket for MF02 IP & MS02 IP
Bracket for MF02 IP & MS02 IP
Product Code
WB/M01
Product Code
WB/M02
Construction material
Stainless steel 316
Construction material
Stainless steel 316
Guarantee
1-year
Guarantee
1-year
USE IN CONJUNCTION WITH
USE IN CONJUNCTION WITH
Complete with wall fixings
MF02 IP
153
MS02 IP
154
3
Complete with wall fixings
MF02 IP
153
MS02 IP
154
7
84mm
5 4
0
Ø45mm
10mm
1
13mm
54mm
6
2
3 2 1 0
WB/M 02/30°
WB/M BOX
Angled double bracket for MF02 IP & MS02 IP
Back box for WB/M 02/30°
Product Code
WB/M 02/30 DEGREE
Product Code
WB/M BOX
Construction material
Stainless steel 316
Construction material
Steel
Guarantee
1-year
Guarantee
1-year
USE IN CONJUNCTION WITH
USE IN CONJUNCTION WITH
Complete with wall fixings
MF02 IP
153
MS02 IP
154
WB/M BOX
155
WB/M 02/30°
30° angle
7
84mm
26mm
2
0
70mm
9
40mm
3
1
53.5mm
4
Contains earth connector to house LED Driver 10
6 5
Pattress box wall bracket 155
8 7 6 5 4 3 2 1 0
50mm
Join us on social media
collingwoodlighting.com 155
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Small & discreet decorative recessed LED light Perfect for discreet decorative light in interior and exterior applications
ML01
Decorative LED mini light
IP68
Submersible to 9m
1W
Ø26
7-year extended warranty available
50g
46°C
Patent information: collingwoodlighting.com/patent
L70, B10
ZONE
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
-
ML01 NW
>70Ra
4
4
0
3000K
-
ML01 WW
>80Ra
3.6
3
0
2700K NEW
-
ML01 27*
>80Ra
3.5
3.5
0
Amber
-
ML01 AMBER
-
-
-
-
Blue
-
ML01 BLUE
-
-
-
-
Green
-
ML01 GREEN
-
-
-
-
Red
-
ML01 RED
-
-
-
-
*Available on request, please call our team for lead times and MOQ on 01604 495 151
GENERAL Construction material
Stainless steel (316) 200 400
WIRING Cable / flying lead
600
1m (0.205mm2 red & black PTFE)
800 cd / klm
Type of wiring required
Series
LED DRIVERS
Bathroom zone applicable to fitting only
40 000 0K Additional diagrams available at collingwoodlighting.com
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
9
3
PLR/350 1-5
350
Yes
No
0
1
5
2
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
10
1
For LED driver bathroom zone & additional LED drivers see page 290-295
Ø31mm 21mm
Product co ode
0
Product co ode
Description
CR135
0.205mm2 PTFE cable
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
UY2 CONNECTOR
Quick waterproof connector
297
1m
ACCESSORIES
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
156 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Great for guidance lighting Can be used in interior and exterior applications Small & discreet decorative LED light Raised profile creates diffused glow effect on surrounding surface
ML02
Decorative LED mini light
IP68
Submersible to 9m
1W
Ø26
7-year extended warranty available
90g
41°C
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
-
ML02 NW
>70Ra
35
35
4
3000K
-
ML02 WW
>80Ra
24
24
3
2700K NEW
-
ML02 27*
>80Ra
23
23
3
Amber
-
ML02 AMBER
-
-
-
-
Blue
-
ML02 BLUE
-
-
-
-
Green
-
ML02 GREEN
-
-
-
-
Red
-
ML02 RED
-
-
-
-
600 cd / klm 400
*Available on request, please call our team for lead times and MOQ on 01604 495 151
200
GENERAL Construction material
Stainless steel (316)
WIRING Cable / flying lead
1m (0.205mm2 red & black PTFE)
Type of wiring required
Series
LED DRIVERS
Bathroom zone applicable to fitting only
4000 0K Additional diagrams available at collingwoodlighting.com
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
9
3
PLR/350 1-5
350
Yes
No
0
1
5
2
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
10
Ø38.5mm 20mm
Product co ode
1
For LED driver bathroom zone & additional LED drivers see page 290-295
0
Product co ode
Description
CR135
PTFE cable
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
UY2 CONNECTOR
Quick waterproof connector
297
1m
ACCESSORIES
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 157
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Raised profile creates diffused glow effect on surrounding surface Can be used for interior and exterior applications Small, discreet and low glare decorative LED light
ML03
Mini halo LED wall light
IP65
Suitable for use outdoors
1W
Ø26
7-year extended warranty available
30°C 36°C
50g
Patent information: collingwoodlighting.com/patent
ZONE
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour
Product code
CR RI
lm
lm/W
lx at 1m
4000K
-
ML03 NW
>70Ra
40
40
4
3000K
-
ML03 WW
>80Ra
28
28
3
2700K NEW
-
ML03 27*
>80Ra
27
27
3
Amber
-
ML03 AMBER
-
-
-
-
Blue
-
ML03 BLUE
-
-
-
-
Green
-
ML03 GREEN
-
-
-
-
Red
-
ML03 RED
-
-
-
-
*Available on request, please call our team for lead times and MOQ on 01604 495 151
GENERAL Construction material
Anodised aluminium
WIRING Cable / flying lead
90
1m (0,205mm2 red & black PTFE)
120 cd / klm
Type of wiring required
Series
LED DRIVERS
Bathroom zone applicable to fitting only
40 000 0K Additional diagrams available at collingwoodlighting.com
mA
SELV
Dimming
Bathrroom zone
Min
Max
PLU/350 1-9
350
Yes
No
1
1
9
5
PLR/350 1-5
350
Yes
No
1
1
5
4
PLD UNI-DRIVE 350MA
350
Yes
Yes (1-10V)
2
1
10
3
Ø30mm 14/29.5mm
Product co ode
2
For LED driver bathroom zone & additional LED drivers see page 290-295 1
ACCESSORIES Description
CR135
PTFE cable
297
PDC/GRID DIMMER
Grid dimmer kit for multiple fitting types
296
UY2 CONNECTOR
Quick waterproof connector
297
1m
0
Product co ode
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
158 collingwoodlighting.com
Join us on social media
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS Supreme quality, high output, anodised wall light suitable for illuminating large exteriors single or bi-directional low glare fitting IP mains connector included WL070A For size reference only
WL261 WL262 Large, straight to mains, one way LED wall light Suitable for use outdoors
IP65
240V
18 38°
Complete with wall fixings
Large, straight to mains up, / down LED wall light
7-year extended warranty available
5.5kg
44°C
Patent information: collingwoodlighting.com/patent
22W
40W
WL261
WL262
L70, B10
3SDCM
PHOTOMETRICS @ 25°C Colour 4000K
Product code
W
CRI
lm
lm/W W
lx at 1m
38°
WL261FNW
22
>80Ra
1500
68
3786
18°
WL261SNW*
22
>80Ra
1500
68
11695
38°
WL262FNW
40
>80Ra
3000†
75
3786‡
†
18° 3000K
2700K NEW
WL262SNW*
40
>80Ra
3000
75
11695‡
38°
WL261FWW
22
>80Ra
1350
61
3315
18°
WL261SWW*
22
>80Ra
1350
61
9154
38°
WL262FWW
40
>80Ra
2700†
68
3315‡
18°
WL262SWW*
40
>80Ra
2700†
68
9154‡
38°
WL261F27*
22
>80Ra
1310
60
3222
NEW
18°
WL261S27*
22
>80Ra
1310
60
8898
NEW
38°
WL262F27*
40
>80Ra
2620†
65
3222‡
NEW
18°
WL262S27*
40
>80Ra
2620†
65
8898‡
4000 cd / klm 3000 2000
*Available on request, please call our team for lead times and MOQ on 01604 495 151 | † Combined total from both sets of LED | ‡ Per module
GENERAL Building regulations
P (electrical separated) & L (conservation of energy)
Construction material
Anodised aluminium
Inrush current
45A 0.02ms
WL262 400 00K K 18 8° / 4000K 38° Additional diagrams available at collingwoodlighting.com
264mm Cable / flying lead
Supplied with 2pc male / female IP65 connector, 5-9mm cable outer diameter
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz
379mm
WIRING
LED DRIVERS ode Product co
mA
Dimming
Bathroom zone
Min
Max
N/A (integrated SELV driver)
-
No
-
-
-
ACCESSORIES ode Product co
Description
This luminaire contains built-in LED lamps.
There are currently no accessories associated with this product The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 159
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS
Ø300mm
Ideal for corridors, stairwells, high traffic and general areas High efficacy of up to 111lm/W Emergency version exceeds min. requirement for light output Class II (no earth required) Earth terminal provided for earth termination (if required) Supplied with fixings for ease of installation
WL92
Straight to mains, general purpose LED bulkhead
IP65
Suitable for use outdoors
110°
14.6W
3 yr
Emergency versions available
240V
3-year guarantee
IK08
40°C 25°C
25,000h
900g
ZONE
L70, B50
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
110°
WL92KC1X40
>85Ra
1620
111
612
3000K
110°
WL92KC1X30
>85Ra
1450
99
547
EMERGENCY PACK SERVICE OPTION PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
110°
WL92KC1E40
>85Ra
1620 162*
111
612
3000K
110°
WL92KC1E30
>85Ra
1450 145*
99
547
400 cd / klm 300
* Operating lumens in maintained emergency mode
.
200 100
GENERAL Construction material
PMMA plastic
Inrush current
7.1A, 0.05ms
WIRING Cable / flying lead
Push-fit terminals 1.5mm max.
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz 40 000 0K 110°° Additional diagrams available at collingwoodlighting.com
LED DRIVERS mA
Dimming
Power factor
Bathroom zone
Min
Max
-
No
0.9
2
-
-
Ø300mm
81mm 300mm
ode Product co N/A (integrated LED driver)
ACCESSORIES ode Product co
Descriptiion
There are currently no accessories associated with this product
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
160 collingwoodlighting.com
WALL L LIGHTS S SPECIFICATION SHEET
FE EAT TUR RES S& BENEFIITS
Ø300mm
Ideal for corridors, stairwells, high traffic and general areas High efficacy of up to 111lm/W Emergency version exceeds min. requirement for light output Class II (no earth required) Earth terminal provided for earth termination (if required) Supplied with fixings for ease of installation
WL92
Microwave sensor reduces energy consumption by powering off when the surrounding area is unoccupied
Straight to mains, general purpose LED bulkhead with microwave sensor
Microwave sensor will trigger up to 10m
IP65
Suitable for use outdoors
110°
14.6W
Emergency versions available
240V
Microwave sensor version
3 yr
3-year guarantee
IK08
40°C 25°C
25,000h
900g
ZONE
L70, B50
PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
4000K
110°
WL92KC1S40
>85Ra
1620
111
lx at 1m 612
3000K
110°
WL92KC1S30
>85Ra
1450
99
547
EMERGENCY PACK SERVICE OPTION PHOTOMETRICS @ 25°C Colour
Product code
CRI
lm
lm/W
lx at 1m
4000K
110°
WL92KC1C40
>85Ra
1620 162*
111
612
3000K
110°
WL92KC1C30
>85Ra
1450 145*
99
547
400 cd / klm 300
* Operating lumens in maintained emergency mode
.
200 100
GENERAL Construction material
PMMA plastic
Inrush current
7.1A, 0.05ms
WIRING Cable / flying lead
Push-fit terminals 1.5mm max.
Type of wiring required
Parallel (mains) 220-240V AC, 50-60Hz 4000 0K 110°° Additional diagrams available at collingwoodlighting.com
LED DRIVERS mA
Dimming
Power factor
Bathroom zone
Min
Max
-
No
0.9
2
-
-
Ø300mm
81mm 300mm
ode Product co N/A (integrated LED driver)
ACCESSORIES ode Product co
Description
There are currently no accessories associated with this product
This luminaire contains built-in LED lamps.
The lamps cannot be changed in the luminaire.
A++ A+ A B C D E
L E D
874/2012
Join us on social media
collingwoodlighting.com 161
GET IN TOUCH
Light your world with Collingwood Lighting We never stop looking for better and more efficient ways to create great lit environments. Our advanced, precisionengineered luminaires are the product of ceaselessly enquiring minds, minute attention to detail, and always paying attention to what customers say. To see our full range, visit collingwoodlighting.com To find out more, call us on +44 (0) 1604 495 151
facebook.com/collingwoodlighting
twitter.com/collingwoodLED
youtube.com/user/collingwoodlighting
Collingwood Lighting Brooklands House Sywell Aerodrome Sywell Northampton NN6 0BT t +44 (0) 1604 495 151 f +44 (0) 1604 495 095 e sales@collingwoodgroup.com w collingwoodlighting.com