Fibre discs Applications guide Technical information about the backing pad

Backing pad form

Benefit

Application

Medium hard, flat

Even grinding finish, good adaptation to the workpiece

Hard, ribbed

High material removal rates, high stability

Additional benefit of our ribbed backing pad: increased aggression, cool grinding

Finish grinding (grit 50 and finer), edge rounding, contour grinding, surface grinding

Rough grinding (up to grit 40 and coarser), chamfering, deburring work, welded seam work

The safe use of Klingspor abrasives

Klingspor fibre discs have been tested according to the guidelines of the oSa directives and are guaranteed to comply with European safety standard EN 13743

Compared to the smooth backing pad, the hard ribbed packing pad delivers stock removal that is up to 30% higher.

Recommended applications:

The hard ribbed backing pad ST 358 A supports the selfsharpening effect on fibre discs with zirconia alumina (CS 565, CS 570) and ceramic grit (FS 964, FS 966), yielding a higher stock removal rate and longer service life.

Wear

Use

Only

Do

Fibre discs Applications guide Hole pattern for fibre discs

10 = round hole30 = star-shaped hole Additional special cutting shapes are available on request. Please ask for more information.

50 = X-LOCK

Minimum order quantities for made to order items

We reserve the right to over-deliver or under-deliver made to order items.

Conventional abrasives Abrasives with ACT technology Grain pullout

ACT-Advanced Coating Technology

Provides a significantly higher grit adhesion, when working on metal with fibre discs. This significantly increases the life.

Fibre discs

Fibre discs

Coated abrasives

Abrasive fibre disc CS 561

Advantages: For universal use - Largest selection of diameters, grit sizes and hole patterns

Backing pads see page 46-47 / Dispenser see page 47

Fibre discs

Coated abrasives

Abrasive fibre disc CS 565

Advantages: Self-sharpening effect - High aggressiveness on steel and stainless steel - Ideal for rough grinding work - Excellent price-performance ratio

Backing pads see page 46-47 / Dispenser see page 47

Fibre discs Coated abrasives

Abrasive fibre disc, multibond CS 570

Advantages: Self-sharpening effect - High aggressiveness, especially suitable for stainless steelIncrease in performance due to low temperatures - Multibond prevents heat tinting - Especially suitable for use on aluminium

Backing pads see page 46-47 / Dispenser see page 47

Fibre discs

Coated abrasives

Abrasive fibre disc

Fs 964 Act

Advantages: Premium product with excellent performance for working on steel - Micro-crystalline self-sharpening effect - High aggressiveness thanks to self-sharpening, aggressive ceramic grains throughout the service life - Outstanding grit adhesion - Advanced coating technology (ACT) for extraordinary grain adhesion and extended service life

Abrasive fibre disc, multibond FS

966 Act

Advantages: Micro-crystalline self-sharpening effect - High aggressiveness throughout the service life - Outstanding grit adhesion - Long service life, especially suitable for heavy duty applicationsIncrease in performance due to low temperatures - Multibond prevents heat tinting

Backing pads see page 46-47 / Dispenser see page 47