Kronenflex® cutting-off wheels

2,0 - 3,2 mm for angle grinders

Cutting-off wheel INOX

A 24 N SUPRA

Advantages: Special recipe prevents smearing and clogging - High removal rate on stainless steel due to hardened aluminium oxide

Cutting-off wheel INOX

A 36 R SUPRA

Advantages: Excellent cutting performance - Optimized aggression and service life

Kronenflex® cutting-off wheels 2,0 - 3,2 mm for angle grinders

Cutting-off wheel INOX A 36 TZ

Advantages: Very good cutting performance, even with low grinding pressure

Cutting-off wheel A 46 N

Advantages: Special combination prevents smearing and clogging - Optimized cutting off performance on non-ferrous metals

Kronenflex® cutting-off wheels 2,0 - 3,2 mm for angle grinders

Cutting-off wheel C 24

Advantages: Universal cutting-off wheel for all mineral materials - Wide application range due to sharp, coarse SiC grit

Kronenflex® large cutting-off wheels for petrol powered cutter / with clamping device

Advantages: Optimised bond for use on steel, also can be used on stainless steel - For use on gas powered free-hand machines with a cutting speed of 100m/s - Free-hand cutting of pipes, rods, profiles and solid materials

Advantages: For universal use on all rail types - Top performing product for lower powered cutting-off machines with a cutting speed of 100 m/s and clamping device

Kronenflex® large cutting-off wheels for petrol powered cutter with clamping device / for stationary cutting

Cutting-off wheel A 924 SX SPECIAL

Advantages: For universal use on all rail types - Top performing product for high powered machines (>5kW) and hard rails - For use on gas powered cutting-off machines with a cutting speed of 100 m/s and clamping device - Excellent service life

Cutting-off wheel A 24 R

Advantages: Optimized combination for use on steel - Can be used on stainless steel - Good cutting properties - Optimal for stationary 3 - 5 kW cutting-off machine