3 minute read

Lesson

Next Article
Fareways

Fareways

The Longest Yard

Why short putts and long strokes don’t mix.

WHETHER THEY’RE FROM three, six or 10 feet, nothing exasperates a golfer more than those short putts that slide past, lip out or somehow come up short.

One of the most common reasons for this is stroke length. If you tend to take a long backstroke for a short putt, you intuitively know that if you go through just as far as you take it back, then the ball will roll too far past the hole. So, you decelerate to shorten the forward stroke.

A long backstroke and deceleration can lead to a putt that lacks sufficient pace to reach the hole, but it can also promote more rotation of the putter face in the hands, resulting in the ball rolling off your intended line.

The length of the putting stroke is crucial to have consistency with tempo, distance control and little or no rotation of the putter face in your hands. With the many advances in technology, science is proving that a longer stroke increases the probability of greater putter face rotation. Therefore, knowing appropriate lengths of the stroke will make a big difference in your overall putting.

With these practice drills and on the course, it is very helpful to match your practice stroke length to the actual stroke. We observe many times the two do not match up.

By Elena King

TAKE NOTE

The measurements on page 34 are all based on an average green speed of 10 on a Stimpmeter. On a green Stimping at 10, the ball will stop 6 to 12 inches past the hole if it misses. Depending on the actual speed of the green and your tempo, you will need to make proportional adjustments in your stroke length. Inspiration for this drill comes from Dr. Craig Farnsworth and PGA TOUR player Brad Faxon.

PLACING TEES AT PRECISE DISTANCES FROM THE HOLE TO MEASURE YOUR BACKSTROKE AND FORWARD STROKE WILL HELP THE PACE AND DISTANCE OF PUTTS.

STEPS

1Bring your putter, three tees and a ruler or tape measure to a green. Measure 3' from the hole and slide in a tee. Place a second tee 4" beyond the first tee (3'4" from the hole) and the third tee 3¾" in front of the 3' tee (2' 8¼" from the hole). Place the back of the ball at the middle tee (the one at 3').

2Line up to putt with your putter face directly behind the ball at the 3' mark

3Take the putter face back to the tee placed 4" behind the ball.

4Take a smooth forward stroke where the putter face stops at the tee placed at 3¾".

5(Image on p.32) After practicing this length of stroke numerous times to get the feel of what the appropriate length of the stroke should be for a 3' putt, remove the tape measure and start hitting your 3' putts to the hole. For a 6' putt, place the tees at 6' and put a tee at 6'6" and one at 5'7" from the hole. For a 10-foot putt, place the tees at 10', 10'8" and 9'1".

1

2

3

3'4"

3'

2'8¼"

UPHILL, DOWNHILL

Another challenge on the green comes when we find our ball above or below the hole. Downhill and uphill putts also require practice. These two drills will help. Both require sticking a tee in the back of the hole so it covers almost half of the opening of the hole. You can use both drills from 3 to 15 feet.

FOR UPHILL PUTTS

To avoid coming up short, hit the ball with enough speed that it hits the back of the tee (falls in the back half of the cup)

FOR DOWNHILL PUTTS

Hit the putt with just enough speed that it drops in the hole without hitting the tee sticking out of the back of the cup (falls into the first half of the cup).

Elena King, an LPGA Top 50 Teacher, is the owner and director of instruction of ExperienceGolf (experiencgolf.biz) the exclusive provider for golf instruction at CommonGround Golf Course. Reach her at eking@experiencegolf.biz or 303-503-0330.

This article is from: