test by olivier vetil

CATALOGUE

2008/2009

, the constantly evolving specialist Sanitary expertise and consideration for water Via this commitment, development :

underlines the two major areas of our research and Founded in 1947, knew from the beginning, how to innovate in the sanitary market. From the early days it was obvious that it was at stake in the use of water, so concentrated on developing technical solutions which respect this vital resource.

â&#x20AC;˘ Efficient equipment which guarantees hygiene and comfort â&#x20AC;˘ Responsible water management

Now as a major player in the sanitary equipment market, is continually striving to improve the viability, the efficiency and the design of its products.

Toilet seats, cisterns, mechanisms, inlet valves, WC connectors, mounting frames, cladding solution, maintenance system and odour extractor: designs, manufactures and distributes a large range of products and systems for toilet equipment.

The seal of innovation in the WC world SIAMP TECH is specially dedicated to SIAMP products which use never seen before technical innovations. This stamp on a product is a performance guarantee and also a promise to respect the environment.

Thanks to its partnership with O.E.M. and with hundreds of distributors, is in constant touch with this ever-evolving market.

Detecting new requirements of the to-day consumer, concerned by sustainable development issues, is therefore the source of many international patended innovations.

Any product or sanitary equipment with the SIAMP Tech seal must live up to 7 criteria :

Patented technological innovation Significant improvement in the comfort of use Controlled impact on the environment

Apart from its factory in Monaco, is present in Eastern Europe and South East Asia with its subsidiaries in Turkey (Istanbul) and Vietnam (Ho Chi Minh city)

Quality compliant with the standards and rules in force Performance tested and approved by independent external consultants Easy to install Simple maintenance Catalogue 2008/2009 | 3

QUALITY AND STANDARDS

CONTENTS

According to the principle of ISO 9001 version 2000, ’s approach to quality is present at every stage of design, manufacture and distribution of its products. This quality is recognised and certified by approvals of French and International standards.

DIN

TIN WATERMARK

SASO

26 38 58

These standards certify that the manufacturing process guarantees a constant level of quality, and certify the performance of the product. For Example, the NF standard (French Standard) :

12-13 Spinair WC

30-31 Concealed

42-47 Mechanisms

60-63 Thermoset

14-17 VERSO 350

32-33 Close coupled

48-51 Inlet valves

64-65 Polypropylene

18-19 VERSO 800

34-35 Low-level

52-53 Multicare WC®

66-67 MDF

20-21 Finishing furniture

36-37 High-level

54-57 WC Connectors

Certified characteristics: The material: • the resistance to cleaning products reserved for the purpose

SANITARY COMPONENTS A mark certifying: • conformity with the NF076 certification regulation • announced characteristics thanks to constant checking by AFNOR

Certified characteristics: For the mechanisms: Trouble-free operation • flow • tightness

TOILET SEATS A mark certifying: • conformity with the NF240 certification regulation • announced characteristics thanks to constant checking by AFNOR

Certified characteristics : Aptitude for use 4 |

Catalogue 2008/2009

Trouble-free operation: • NF certified taps • NF certified mechanisms

Mechanical properties • endurance (200,000 cycles) • control force

For the float valves: Trouble-free operation • flow for fast filling • sound level during filling • anti-siphon effects • pressure hold Mechanical properties • endurance (200,000 cycles) • bending resistance • adaptability • hygiene • stability Solidity • mechanical endurance (30,000 opening/closing cycles) • static loads (150 kg) • dynamic loads (30,000 falls of 75 kg load)

Toilet seats

Technical equipments

The dimensions: • allowing connection to supply and drain taps • allowing replacement

Cisterns

A mark certifying: • conformity with the NF017 certification regulation • announced characteristics thanks to constant checking by AFNOR

• resistance to contact of non-prohibited chemicals • resistance to corrosion (frame) • the required solidity

Mounting frames

SANITARY EQUIPMENT

22-23 WC Packs 24-25 Other frames

Catalogue 2008/2009 | 5

Unlike certain preconceptions, a wall-hung bowl can be installed in almost any case. Only very poor quality floor requires specific installation, although it is not totally impossible

The overall dimensions of the frame + bowl are no larger than a conventional toilet and may even generate a gain in space if the frame is incorporated into the wall.

Installing a wall-hung bowl means choosing an installation that is…

…better looking offering a real possibility of adding to the decorative scheme of the toilet …more hygienic The concealed cistern and wall-hung bowl eliminate hidden corners, simplify cleaning and are in favor of perfect hygiene..

6 |

Catalogue 2008/2009

Mounting frames

The advantages of the mounting frames…

Supporting Wall : Every type of model (wall, self-supporting or floor), for economic reasons the wall-mounted solution is the one most often adopted.

Where can a wall-hung bowl be installed? Obviously, a wall-hung bowl is installed in a room dedicated to the function instead of the floor-standing unit with the adjacent semi-low or high placed cistern. A wall-hung bowl can also be installed in a bathroom. Some dedicated specific space to be created in this room.

Light partition : Self-supporting or floor mounted

solutions even allow a

For a second toilet, allows toilets to be installed in the “lost areas” as in under the eaves or a staircase, as long as a water supply is possible, with a 100 mm diameter drain or at least a 32 mm diameter drain with a “sani-broyeur”.

Technical riser (specific to community housing): Floor model whatever the separation material within the limit of 100 mm thickness, in the standard version and up to 250 mm with specific accessories.

What needs to be known before choosing models? Glossary :

➀

The type of floor :

In a new building, the information is simple: either the support frame is placed on a concrete screed or on a known type of finished floor: general tiled. For renovation, if the information is not available, it will either by necessary to sound out the floor by drilling into a location that can subsequently be concealed.

➁

• Wall Model: Frame attached both to floor and wall • Self-supporting Model (Universal): Frame attached only to the floor with or without the possibility of connection to the wall. • Floor Model: specific design, totally self-contained and suitable for installation at a more less great distance from the wall (in particular to handle rooms that are not square or the passage of a drain column, or even when there is no partition).

Installation : The type of wall in front of which the frame will be installed:

There are two possible cases: • Bearing wall: a bearing wall or partition is of concrete, plaster blocks, stones, plastered tiles or any other material at least 100 mm thick. • Light partition: a light partition is a partition made of hollow bricks, honeycomb plasterboard or solid plasterboard or any other material less than 100 mm thick. More of the time, simple acoustic sounding will determine the quality of the wall (dull sound = supporting wall, resonant sound = light partition).

The operation is simple and requires no heavy tooling: • a tape measure and a pencil • a spirit level • an electric drill with drill bits 10 mm max. in diameter • open-end wrenches, maximum size 19 mm • a hammer • a hacksaw • a file Can be done in less than 3 hours.

Cladding : The right choice : In all cases, the quality of the floor is important. Ideally, the material should be supporting concrete or another structure with a capacity of 250 kg per m2. Whenever there is a doubt, it is advisable to call in a professional to find the right solution. 8 |

Catalogue 2008/2009

The installer is given the greatest freedom in terms of cladding. There are only two necessary constraints: • the thickness of the cladding (from 16 to 100 mm) • the mandatory securing of the cladding to the frame structure Catalogue 2008/2009 | 9

Mounting frames

PRACTICAL INFORMATIONS

Mounting frames

PRODUCTS INFORMATIONS

VERSO Installation freedom…

Maintenance Thanks to its width of 35cm, the VERSO range gives you real freedom to decorate the WC closet, by adding storage cabinets on each side of the toilet, for example. The VERSO 800 version (80cm high) enables you to envisage installing a toilet in the attic, under the stairs, under a window, etc. The VERSO range also comprises wash-basin, bidet and toilet bowl structures.

Depending on the hardness of the network water, it may be necessary to clean or change the joints and membrane of the cistern equipment. The control plate serves as an access trapdoor and the cistern equipment is directly accessible and easy to take out of the tank.

Extra tools

The fully autonomous design of the floor fixed versions enables you to install the frame by itself, the double structure allows for finishing of the toilet on both sides. The

range is complete with ready-to-tile decorative panels as well as bathroom storage and decorative furniture.

Ease and Safety … Steel structure Frame and feet tested to 400Kg, anti-corrosion treated, they combine robustness, safety and a long service life.

PA 2050 B : Extensible pipe for the Fixing screws for activating the Lengthened supply tube: special Extensions for bowl fixation toilet frame which enables you to lengthened control plate for thick handicaped bowl rods: allows you to replace the bowl compensate for the evacuation hole finishings (up to 250mm) with another of a different size. excentricity.

Insulated cistern Made of shock resistant Polystyrene (highly resistant to thermal variations and ageing) it has a max capacity of 6 litres. It is insulated inside (PSE single block shell) to prevent any condensation and improve the phonic insulation of the unit (silent).

Equipment This is comprised of a double volume mechanism and silent valve, both of which come from the standard range (several million already sold). These products are NF approved and still undergo regular tests of 200 000 manipulations. They have been chosen by the worlds largest ceramics manufacturers for their own equipment.

Frame type

Simple clip-on evacuation drain. 10 |

Catalogue 2008/2009

BL... 1100

BB... 1100

BB... 800

p. 24-25

✓

✓ ✓

Wash basin

Other

✓

Top

✓

Side

✓

SPINAIR WC® Option Integrated odour extractor

Easy to assemble Robust and simple fixations Adjustment by setscrew (safe and precise)

SC... 350

p. 18-19

Bidet

Control type

The water arrives directly into the cistern thus avoiding the risk of any leaks outside the tank. Water can be supplied via any type of pipe or tube (copper, XLPE, PVC, flexitube etc) as the stop gap is equipped with a bicone.

BC... 800

p. 14-17

Bowl

Front

Secure supply

BC... 350

✓

Decoractive furniture Option

p. 20-21

Pack WC Option

p. 22-23

Catalogue 2008/2009 | 11

The idea behind the SPINAIR WC® built-in odour extractor is quite simple, by connecting the toilet bowl directly to the building’s mechanised ventilation shaft or to any autonomous ventilation system already existing in a standardised building. Any odours generated by the user are directed towards the outside of the building, without crossing the room, and are directly extracted at the aperture of the ventilation shaft.

Mounting frames

Installation

Back side

The Concept

Front side

BUILT-IN ODOUR EXTRACTOR

How it works The extraction from the toilet bowl is done via the brace which is in constant contact with the overflow of the flushing mechanism. To be 100% efficient, this contact must be completely airtight so that no extraction volume is lost (extraction into the tank). To achieve this, the SPINAIR WC® (trade mark) system uses an upturned bell-jar immersed in the water, which ensures the airtightness. The bell-jar does not interfere with the overflow function. The bell-jar is then connected by a flexible tube to a sleeve which crosses the tank and which ensures connection to the mechanised ventilation shaft

Collective ventilation shaft

Strong points • Quick to install : By simple connection to the mechanised ventilation shaft • Absolute minimal energy consumption : The extraction by the Ventilation column is automatically shared between the existing extractor outlet and the toilet bowl, without imbalance (tested and approved on site*). The efficiency of the SPINAIR WC® system only requires a minimum of 2m3/hour of extraction in the bowl. * Show buildings : Hotel Novotel Bordeaux Meriadec (48 rooms equipped), Hotel Mercure Strasbourg (63 rooms equipped) Average extraction recorded in the bowl 3m3/hour and at the extractor outlet 35 m3/hour. (Readings taken with a hot wire anemometer and k 35 cone) • Silent : It is the mechanised ventilation shaft which is active • No maintenance : No motor, no filter to change • Self-cleaning : The small volume of air sucked into the bowl virtually excludes any risk of undesirable particles being sucked up, moreover because they system is washed out after every flush (the water uses the air circuit backwards). • Environmentally friendly : No disposable rubbish (used filter, battery or fuel), no extra energy output, avoids the need for deodorant sprays etc. SPINAIR WC® is a

Cut the flexible tube (joint between the extractor outlet and the ventilator motor)

Screw in the T joint

The range

In collective buildings, public rest rooms and at home, healthy and odour-free toilets support

Catalogue 2008/2009

Attach the quick-fit hose (sealing is ensured by a foam joint)

Connect the hose to the frame

Individual ventilation shaft

product.

Result

12 |

Drill a hole in the Ventilation Column (Ø) 32 mm

The SPINAIR WC® range can also equip the full range of WC VERSO 350 frames

Use sticky tape to seal Connect to cistern

The connection between the frame and the quick-fit hose or T joint can be done with any tube with Ø 32mm (PVC, flexitube…) If there are fire safety requirements there is a galvaflex anti-fire tube in the SPINAIR WC® range. Catalogue 2008/2009 | 13

BCS 350 floor mounted version

Description

Dimensions Mounting frames

BATI-WC VERSO 350

1/4-turn spherical stopcock

| DIN | TIN |

PSE template (protection when applying the finishings)

Supply bend

Supply bend plug (protection when applying the finishings) WC pipe plug (protection when applying the finishings)

Supply sleeve Bowl fixation kit

Setscrew (x 4) Attaching screw (x 6)

Flexible sleeve (x 2) (protects the bowl)

1100 to 1300

• Double structure made of steel tubes 30 x 30 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist) • The feet are made of a bichromate treated steel plate (80 x 100 x 8 mm) and two tubes of electro-welded, bichromate treated steel (25 x 25 x 3 mm) • Fixing to the floor with 6 bichromate metal plugs.

Float valve Mechanism

180 or 230 325 to 525

A speciality, the double structure allows installation in any sort of configuration and due to its independent fixation (no need for it to back onto a wall or partition) offers the possibility of creating a toilet area in the bathroom which can be used as a framework for a half-partition.

Bowl fixation strip (x 2)

Pipe fixing bracket

• Also available in the SPINAIR WC® version. Adjustable feet (x 2)

Float valve Mechanism

Supply bend plug (protection when applying the finishings) Supply bend

• Steel tube structure, 45 x 45 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist) • The feet are made of a bichromate treated steel plate (40 x 80 x 8 mm) and two tubes (electro-welded bichromate treated steel, 40 x 40 x 4 mm) • Fixing to the floor with 6 bichromate metal plugs. • Can be joined to the wall by two fixing strips, held in place by two plugs and bichromate long bolts.

(min 147 for bent pipes)

PSE template (protection when applying the finishings)

WC pipe plug (protection when applying the finishings) Supply sleeve

Bowl fixation strip (x 2)

Setscrew (x 4)

Bowl fixation kit

Flexible sleeve (x 2) (protects the bowl)

325 to 525

The design of the structure enables you to have, with the same product, a self supporting or wall mounted frame, which can be installed whatever the configuration of the closet, (supporting wall or light partition, supporting floor or not).

142 to 245

1/4-turn spherical stopcock

1100 to 1300

BCU 350 universal version

Wall fixing lug

| DIN | TIN |

Pipe fixing bracket

• Also available in the SPINAIR WC version. ®

Attaching screw (x 6)

180 or 230

Adjustable feet (x 2)

BCM 350 wall mounted version

142 to 245

Wall fixing lug 1/4-turn spherical stopcock

| DIN | TIN |

(min 147 for bent pipes)

Float valve PSE template (protection when applying the finishings) Mechanism

Strip fixing bracket Plugs (x 8) Bowl fixation strip

Supply bend plug (protection when applying the finishings)

WC pipe plug (protection when applying the finishings)

Supply sleeve

Flexible sleeve (x 2) (protects the bowl) Bowl fixation kit Setscrew (x 2)

• Also available in the SPINAIR WC version. ®

Attaching screw (x 8) Adjustable feet (x 2)

14 |

Catalogue 2008/2009

325 to 525

• Steel tube structure, 30 x 30 x 1.5mm joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist) • The feet are made of a bichromate treated steel plate (100 x 30 x 8mm and two tubes of electro-welded, bichromate treated steel (25 x 25 x 3mm) • Fixing to the wall and the floor by plugs and bichromate long bolts

Supply bend

1100 to 1300

Designed to be fixed to the wall and joined to the floor, this version is intended for a closet with a supporting wall.

180 or 230

Pipe fixing bracket

Catalogue 2008/2009 | 15

CONTROL PLATES FOR VERSO 350

LEMON

ABS frame Small volume control

MEDIA

For quick and easy installation, the fixing and activating screws can be manually cut to length to adjust their length to the dimensions of the finishing.

YIN YANG

• White • Bright chrome-plated (casing and large button bright chrome-plated and small button painted, mat chrome look) • Mat chrome (casing and large button painted, mat chrome look and small button bright chrome-plated)

ABS casing

Large volume control

MOON

Made of ABS, these dual flush control plates are available with three types of finish :

Polyamide fixing and activation screw

Dimensions Mounting frames

Dual Flush ABS

Description

Dual Flush Zamac

180

Made of Zamac, the dual flush SMART control plate is available with two types of finish: • Bright chrome-plated • Mat chrome

ABS casing Zamac large volume control

SMART

And in two versions : • Standard, for use in individual homes • Untamperable, for use in public or collective places (untamperability is ensured by a headless screw M4 x 12)

200

Polyamide fixing and activation screw

Zamac frame

Zamac small volume control

8,1

Polyamide fixing and activation screw

Single Flush ABS

200

181

Made of ABS the single flush control plate is available with two types of finish:

21,7

ABS casing

• White • Mat chrome (painted)

Control panel

ABS frame

9 Polyamide fixing and activation screw

16 |

Catalogue 2008/2009

ABS casing

MV INOX

Made of brushed stainless steel, this is an untamperable control plate designed for use in public or collective places (untamperability is ensured by two stainless steel screws torx 4-2 x 19).

184

Untamperable Single Flush

200

Stainless steel control panel

Stainless steel frame

Untamperable screw

Catalogue 2008/2009 | 17

PSE template (protection when applying the finishings)

| DIN | TIN | dual flush control plate available with 3 types of finish : White Bright Chrome-plated Mat Chrome

1/4-turn spherical stopcock

Float valve Mechanism Supply sleeve

• Double structure made of steel tubes 30 x 30 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist) • The feet are made of a bichromate treated steel plate (180 x 100 x 8 mm) and two tubes of electro-welded, bichromate treated steel (25 x 25 x 3 mm) • Fixing to the floor with 6 bichromate metal plugs

Bowl fixation strip (x 2) Pipe fixing bracket

single flush pneumatic control

1/4-turn spherical stopcock

Flexible sleeve (x 2) (bowl protection)

180 or 230

Float valve Mechanism

Having the same structure as BCS 800, this product is intended for installation in technical riser columns which must comply with anti-fire standards (drilling the fireproof partition at < Ø 75mm), and the conduit (evacuation and supply pipe) at <Ø 125mm, class M1).

BCM 800 wall mounted version

WC pipe plug (protection when applying the finishings)

Metal plugs (x 6) Adjustable feet (x 2) Setscrew (x 4)

Supply sleeve Supply bend Bowl fixing kit

cable operated dual flush control

Bowl fixation strip (x 2) Pipe fixing bracket

Supply bend plug (protection when applying the finishings)

Setscrew (x 4) Metal plugs (x 6) Adjustable feet (x 2)

PSE template (protection when applying the finishings)

| DIN | TIN | dual flush control plate

WC pipe plug (protection when applying the finishings)

325 to 525

Available in versions: Single flush: • BCS 800 PN, pneumatic controls with either a white or bright chromeplated button or with an untamperable stainless steel panel Dual Flush: • BCS 800 CA, cable operated, with a through button of either 70mm maximum, (CA70) or 150mm maximum (CA150)

Supply bend plug (protection when applying the finishings)

800 to 1000

Bowl fixing kit Supply bend

BCS 800 Fire Safety floor mounted version

180

325 to 525

Dimensions

800 to 1000

BCS 800 floor mounted version

Description

Flexible sleeve (x 2) (bowl protection)

180 or 230

180 to 245

1/4-turn spherical stopcock

Wall fixing lug

Fixing bracket for the bowl fixing strips (x 2) Plugs (x 8)

Mechanism Bowl fixing kit Supply bend plug (protection when applying the finishings)

Bowl fixation strips (x 2)

Pipe fixing bracket Setscrew (x 8)

WC pipe plug (protection when applying the finishings)

Supply sleeve Attaching screw (x 6) Adjustable feet (x 6)

18 |

Catalogue 2008/2009

325 to 525

• Steel tube structure, 30 x 30 x 1.5mm joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist) • The feet are made of a bichromate treated steel plate (100 x 30 x 8mm) and two tubes of electro-welded, bichromate treated steel (25 x 25 x 3mm) • Fixing to the wall and the floor by plugs and bichromate long bolts

Float valve Supply bend

800 to 1000

Designed to be fixed to the wall and joined to the floor, this version is intended for a closet with a supporting wall.

available with 3 types of finish : White Bright Chrome-plated Mat Chrome

180 or 230

Flexible sleeve (x 2) (bowl protection

Catalogue 2008/2009 | 19

Mounting frames

BATI-WC VERSO 800

FINISHING FURNITURE

Dimensions Mounting frames

Description

MEUBLEO 350 shelf hole cut for control panel

White complete MEUBLEO

runner

door

Assemble the furniture

Lay the furniture on the frame

hole cut for connections

Adjust runners & skirting board skirting board

cabinet

sold as a complete unit or in 2 parts (base + shelf)

Adjust the shelf

Put the doors into place

Install the control plate & bowl

Choice of shelf finishings

MEUBLEO can be fitted in any space from 79 to 100 cm wide by simply cutting the runners and the shelf to size. It can also be height adjusted (adjusted to the frame height from 110 to 122 cm) and width adjusted (adjustable to the frame width of 21 to 24.5 cm). • Shelf : pre-formed melamine, 22mm, white • Pre-cut front panel : MDF coated PVC, white, 19mm • Doors : MDF coated PVC, white, 19mm 1. Traditional Light Wood 2. Traditional Dark Wood 3. Trendy Light Wood 4. Trendy Dark Wood 5. Plain White

• Chrome handles • Cabinets : white melamine, 16mm • Runners : white melamine, 16mm, delivered with decorative beading • Skirting board : white melamine, 19mm, delivered with decorative beading

Time delayed tap h = 265mm

MEUBLEO 800

basin Ø 270mm

hole cut for control panel

runner

Version for Bati VERSO 800 with flush control on the top Can be fitted in any space from 80 cm to 100 cm wide by simply cutting the runners and the shelf to size. It is also height adjustable (adjusted to the frame height of 80 to 85 cm) and width adjustable (adjustable to the width of the frame, from 21 to 24.5 cm)

Option with built-in wash basin and automatic time delayed tap

door

hole cut for connections

skirting board

basin evacuation

cabinet

20 |

Catalogue 2008/2009

Catalogue 2008/2009 | 21

Description

Dimensions 147 to 245

• VERSO BCU 350 toilet frame, floor mounted with possible wall joint, front flush control, delivered complete with Yin-Yang white dual flush control plate and evacuation kit.

Pack WC

Mounting frames

COMPLETE SOLUTIONS

• Lotus white suspended toilet bowl • OPIO white polypropylene toilet seat with stainless steel top fixing hinges.

325 to 525

• Full WC VERSO BCU 350 unit

355

1100 to 1300

Universal • Lotus suspended bowl

520

• Opio toilet seat

• OLYA white Thermodur toilet seat with stainless steel top fixing hinges

• Full WC VERSO BCS 800 unit • Lotus suspended bowl

180

• VERSO BCS 800 toilet frame, floor mounted only, top flush control, delivered complete with white dual flush control plate and evacuation kit

• Opio toilet seat

800 to 1300

• Lotus white suspended toilet bowl • OPIO white polypropylene toilet seat with stainless steel top fixing hinges

355

Eureka

540

• Olya toilet seat

360

• Olya semi-fared suspended bowl

1100 to 1300

• OLYA white semi-fared suspended toilet bowl

325 to 525

• Full WC VERSO BCU 350 unit

325 to 525

Kyriel

147 to 245

• VERSO BCU 350 toilet frame, floor mounted with possible wall joint, front flush control, delivered complete with Yin-Yang white dual flush control plate and evacuation kit.

520

Complete Pack WC

325 to 525

• One MEUBLEO 350, white

355

• One Universal PACK WC

1100 to 1300

Duo

210 to 245

• VERSO BCU 350 toilet frame, floor mounted with possible wall joint, front flush control, delivered complete with white Yin-Yang dual flush control plate and evacuation kit. • Lotus white suspended toilet bowl • OPIO white polypropylene toilet seat with stainless steel top fixing hinges • MEUBLEO 350, white

• One wash basin with taps

22 |

Catalogue 2008/2009

355

• One MEUBLEO 800, white

800 to 1300

• One PACK WC Eureka

210mm mini from wall

325 to 525

Trio

• VERSO BCS 800 toilet frame, floor mounted only, top flush control, delivered complete with white dual flush control plate and evacuation kit • Lotus white suspended toilet bowl • White OPIO polypropylene toilet seat with stainless steel top fixing hinges • MEUBLEO 800, white • Complete acrylic wash basin unit Ø 270mm to be installed, (chrome time delayed tap with tubing and T joint water supply, evacuation with flexible tube connection to the WC pipe.

520

Catalogue 2008/2009 | 23

Universal support for suspended toilet bowl, water supply either by built-in cistern or by pressure.

Dimensions

Connection fixation plates

SCU 350

Bowl fixing strip (x 2)

• Steel tube structure, 45 x 45 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist) • Feet comprising of a steel bichromate plate (140 x 80 x 8mm) and two tubes (electro-welded, bichromate treated steel, 40 x 40 x 4mm) • Fixing to the floor by 6 bichromate metal plugs

Bowl fixation kit

325 to 525

Toilet bowl frame

Description

Flexible sleeve (x 2) (bowl protection) Long bolts (x 6) Feet

Wall fixing lug

Wash-basin frame

Mounting frames

OTHER FRAME TYPES

80 to 245

400

BLM 1100 Basin fixation flange (x2) Basin fixation kit

Drainage tube

780 to 980

1080 to 1280

Water supply teat (x2) Sleeve fixation bracket

804 to 1004

Supply/drainage support

• Steel tube structure, 30 x 30 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist) • Feet comprising of a steel bichromate plate (100 x 30 x 8mm) and two electrowelded steel bichromate tubes (40 x 40 x 4mm) • Fixing to the wall and the floor by plugs and bichromate long bolts

Setscrew (x2) Adjustable feet (x2)

Bidet frame floor mounted version

BBS 1100

400

BBS 800

180

400

BBS 800

180

• Fixation to the floor by 6 bichromate metal plugs and long bolts Setscrew (x4)

325 to 525

Bidet fixation kit Water supply/drainage support

800 to 1000

Bidet fixation strip (x2) Sleeve fixation bracket

325 to 525

Flexible sleeve (x2) (bowl protection)

• Feet comprising of a steel bichromate plate (100 x 30 x 8mm) and two electrowelded steel bichromate tubes (40 x 40 x 4mm)

1080 to 1280

• Steel tube structure, 30 x 30 x 1.5mm, joined by electro-weld and anti-corrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)

Adjustable feet (x2) Water supply teat (x2)

BBM 1100

Wall fixing lug

BBM 800

Fixation strip for the bidet rods Sleeve fixation bracket Drainage tube Setscrew

Flexible sleeve (x2) (bowl protection) Bidet fixation kit Supply/drainage support

Adjustable feet (x2)

800 to 1000

• Fixing to the wall and the floor by plugs and bichromate long bolts.

BBM 800 400

Bidet fixation rods (x2)

• Feet comprising of a steel bichromate plate (100 x 100 x 8mm) and two electrowelded steel bichromate tubes (25 x 25 x 3mm)

80 to 245

325 to 525

• Double steel tube structure, 30 x 30 x 1.5mm, joined by electro-weld and anticorrosion treated, epoxy paint guaranteed 25 years (withstands 600 hours in saline mist)

400

80 to 245

325 to 525

BBM 1100

1080 to 1280

wall mounted version

Water supply teat (x2)

24 |

Catalogue 2008/2009

Catalogue 2008/2009 | 25

Made of recyclable synthetic materials which combine robustness and shine, the range of cisterns is both complete and universal :

• High-level cisterns: Intended for the replacement of cast iron old cisterns, the range comprises an inexpensive model ( PRIMO ) activated by a hanging chain and a “comfort” model ( RONDO ) activated by a chain or pneumatically, with insulation and a silent floater valve. • Low-level cisterns: Intended for specific installations, the range comprises an inexpensive model ( PRIMO ), an extra flat model ( EXTRAPLAT 68 ) and a corner model ( ANGLE 78 ). An adapter kit enables other models of the range ( RONDO, SCALA ) to be installed in the low-level position. • Close coupled cisterns: Meeting the basic requirements of the market, there are two models : RONDO and SCALA, “comfort” models with insulation, silent valve and water saver mechanism. • Concealed cisterns: Designed for built-in installations for suspended toilet bowls, floor mounted, walled in or plumbed in to the rising column, the range comprises two models : INTEGRA with flush control plate (as per WC frame) and INTRA with wire operated push button.

Universal… Close coupled cisterns are equipped with fixations which enable installation on any type of toilet bowl. A universal water supply kit (optional extra) enables many problems to be overcome : Bottom, side or back water supply inlet.

26 |

Catalogue 2008/2009

Cisterns

Complete…

PRODUCT INFORMATION

OPTIONAL EXTRAS

Universal fixation

Low-level adapter kit Enables a close coupled cistern to be installed at low-level position

Universal water supply kit

Universal supply kit Enables all types of supply for close coupled or low-level cisterns

Comfort range equipment Economic range equipment

Water saving mechanism and silent inlet valve

For Turkish toilets with high-level cistern

Single flush mechanism and standard inlet valve

INTEGRA DF

Equipment

DF mechanism

✓

Interruptible mechanism

INTRA Floor bowl Side inlet

✓

✓ ✓

✓

SF mechanism Silent valve

INTEGRA SF

INTRA Floor bowl Bottom inlet

✓

INTRA Susp. bowl Side inlet

✓

INTRA Susp. bowl Bottom inlet

✓

Type of water supply

Bottom

✓

Universal

SCALA DF

RONDO DF

✓

RONDO MV

✓

RONDO H

RONDO Hpa

RONDO Hpe

✓

✓ ✓

✓

with kit

✓ ✓ ✓

✓ ✓

without down tube

Width in mm

492

460

430

Height in mm

516

380

410

Depth in mm

139

150

125 to 335

220

Insulated tank

Other

✓

Adjustable fixation Delivered complete

Dimensions

Bowl inter axis accepted Wall fixation inter axis Drainage diameter

28 |

Catalogue 2008/2009

127

PRIMO 58

PRIMO 28

PRIMO 08

✓

✓ ✓

EXTRAPLAT 68

ANGLE 78

✓

✓ ✓ ✓

without down tube

✓ ✓

without down tube

✓ ✓ ✓

430

435

310

380

370

300

150

115

220

310 to 350

Pneumatic control

332 332 332 332 (excluding plug) (excluding plug) (excluding plug) (excluding plug)

Elbow down tube with rubber cone For English type WC with high-level cistern

Traditional valve Side

Cisterns

Straight down tube with spray

✓

125 to 335 220

220

Catalogue 2008/2009 | 29

Description

Dimensions

Connection to the water supply is via a T square 3/8 stop tap and copper tube 8 x 10. As the connection is made inside the cistern, there is no risk of a leak.

INTEGRA

Cistern, max capacity 9 litres (water level adjustable). Watertightness is individually tested in the factory

492

Fixation bracket (braces supplied)

16 to 80

• “Comfort” range • Available in Single or Dual flush version

516

CONCEALED CISTERNS

Silent inlet valve (1st category, - 20 dB)

• Delivered complete with insulation, white control plate, fixing brackets, supply sleeve, stopcock, seals, screws and net for building in.

Dual flush mechanism

Insulation : outer casing made of expanded polyethylene

HDPE supply pipe with double O-ring joint on the cistern side and gasket on the side of the water supply hose.

for suspended toilet bowls

INTRA

for suspended toilet bowls… side inlet bottom inlet

460

Reversible lid (for front or top controls)

Dual flush mechanism

Silent inlet valve (1st category, - 20 dB)

332

Fixation strip

PSE insulation casing

• “Comfort” range Supply pipe

• Available for wall-hung or floor mounted bowls

127 Water supply hose

• Bottom or side inlet

for floor mounted toilet bowls… side inlet bottom inlet

for floor mounted toilet bowls Reversible lid (for front or top controls)

• Delivered complete with insulation, chrome plated double flush control button, Ø 50mm, fixation brackets, 1/4-turn spherical stopcock, seals and screws.

• Max capacity: 6 litres

460

Fixation strip Mechanism (Dual flush, small adjustable cistern, cable operated)

332

• Control by top or side cable (reversible lid)

Silent inlet valve side water supply inlet, (water level adjustable)

PSE insulation casing

Bend seal Bend nut

127

Bend pipe

Bowl seal

30 |

Catalogue 2008/2009

Catalogue 2008/2009 | 31

Cisterns

139

194

• Max Capacity : 9 litres

CLOSE COUPLED CISTERNS

SCALA

Description

Dimensions 430

Lid Internal fittings

150

Insulation

320

• “Comfort range” 380

• Ceramic look

125 to 235

• Universal fixation • Dual flush push button

Cistern shell

Fixation screws

• Delivered complete with insulation, seals and fixing screws

66 to 90

RONDO

Cisterns

• Max capacity: 9 litres

430

Lid Internal fittings

Insulation

150 320

• “Comfort range”

410

• Ceramic look • Universal fixations • Stop or dual flush side button

125 to 235 Cistern shell

Fixation screws

• Delivered complete with insulation, seals and fixation screws

66 to 90

• Max capacity: 9 litres

PRIMO 58

430 Internal fittings

Lid

150 320

• Economic range

• Single flush side button • Delivered complete with seals and fixation screws • Max capacity: 9 litres

32 |

Catalogue 2008/2009

380

• Universal fixations

125 to 235

Cistern shell Fixation screws

66 to 90

Catalogue 2008/2009 | 33

LOW-LEVEL CISTERNS

Description

EXTRAPLAT 68

Dimensions 435

Cistern lid

115

Ø 12/17 330 ± 20

• “Comfort” range 370

Insulated cistern shell

420 à 620

• Low-level mounted • Extra flat (115mm) • Interruptible Single flush control on side button • Delivered complete with insulation, elbow pipe connection, seals and fixation bracket Pipe with seal

Cisterns

• Max capacity: 9 litres 180 ± 5

ANGLE 78 • “Comfort” range

Cistern lid

310

0 31

Insulated cistern shell

300

• Low-level corner mounted • Interruptible Single flush control on side panel • Delivered complete with insulation, elbow pipe connection, seals and fixation bracket

• Max capacity: 9 litres

Pipe with seal

430

PRIMO 28

220 Cistern lid Internal fittings

150

Cistern shell

560 to 660

• Low-level mounted • Single flush control on side panel • Delivered complete with insulation, elbow pipe connection, seals and fixation bracket

620 to 720

• Economic range

550 to 650

380

Pipe

• Max capacity: 9 litres

Fixation screws

125 to 240 Seal

34 |

Catalogue 2008/2009

Catalogue 2008/2009 | 35

HIGH-LEVEL CISTERNS

RONDO H

Description

Dimensions

Lid Internal fittings

430

150

220

Insulation

400

• “Comfrot” range • High-level mounted • Side chain pull single flush Cistern shell

• Delivered complete with seal and fixation bracket but not the descent pipe

Lever

• Max capacity: 9 litres

Cisterns

Fixation screws

Seal

RONDO Hp pneumatic control

Lid Internal fittings

430

150

220

Insulation

• “Comfort” range 400

• High-level mounted • Single pneumatic flush control, visible or sunk in Cistern shell Pneumatic push button

• Delivered complete with seal and fixation bracket but not the descent pipe

• Max capacity: 9 litres Fixation screws

Seal

PRIMO 08

Internal fittings Lid

430

150 53

220

400

• Economic range Cistern shell

• High-level mounted • Side chain pull single flush Lever

• Delivered complete with seal and fixation bracket but not the descent pipe

• Max capacity: 9 litres Seal Fixation screws

36 |

Catalogue 2008/2009

Catalogue 2008/2009 | 37

Chosen by many worldwide O.E.M., the range of mechanisms and inlet valves ensures quality and robustness, guaranteed by NF (French Standards) and many international certifications. Manufactured from noble, recyclable materials, these products are regularly tested, even individually tested for NF certified inlet valves, to ensure long lasting efficient operation, resulting in a 10 year guarantee for the whole range (excluding rubber parts) Expectations of comfort (silence, easy to use, easy to install) and water saving have motivated to develop concepts which are now the object of many patents.

has developed a complete range of WC connectors to complete its role as a WC manufacturer. The full range is manufactured from fire resistant PVC (according to the French anti fire Standard M1).

The range also includes flexible pipes and especially a stretchable pipe which retains shape and offers many connection possibilities for all sorts of renovation configurations. The tube diameter for this range is 100mm, and for specific cases, the range includes reducers for Ø 80 and Ø 90 and an adapter for Ø 110mm. NB : the diameters given are for the outer diameter of the PVC tubes : Ex : a 100/90 reducer enables you to join a PVC tube with Ø 100 (non sleeved) to a tube of Ø 90, (non sleeved)

Finally, in order to prolong the life of WC equipment, has invented an easy, all-in-one maintenance system : MULTICARE WC®

38 |

Catalogue 2008/2009

Technical equipments

As well as standard models: • Long, straight and elbow pipes • Male and female elbow pipes • Hoses and reducer taps

IS 40

JD 44

255 to 455

Specif Porcher

Overflow height (mm)

149 to 245

155 to 245

180 to 240

Specif Porcher

✓ ✓

✓

✓ ✓

✓

Hydraulic

✓ ✓

✓

Mechanical

✓

3/8 Plastic

✓

✓ ✓

✓

✓ ✓

✓

✓ ✓

107

230 to 348

282

230 to 348

287

290

105

110

1/2 Brass

140

case 110

case 85

250

Max space required (mm)

110

Width (mm) Height (mm) at the supply axis Floater (mm)

80 x 80

Ø 78

Lever length

270 (brass)

295 (alu)

Using an adjustment screw

KIWA SASO WATERMARK WRAS

105

✓ ✓ ✓

✓

✓ ✓

BAS 26EL

✓

Bottom

✓ ✓ ✓

✓ ✓

✓ ✓ Catalogue 2008/2009 | 41

Technical equipments

Side

✓

HANDY 93B

WATERMARK

Range of water level adjustment (mm)

Standards

FR 41

305 to 415

Adjustable water height :

Catalogue 2008/2009

ASP 43

STORM 33A

272 to 480

DIN

40 |

CLASSIC 42

SKILL 51

SKIPPER 36A

SWITCH 22A

OPTIMA 49

305 to 415

SASO

Specif Specif Ideal Jacob Standard Delafon Specif Specif Ideal Jacob Standard Delafon Specif Specif Ideal Jacob Standard Delafon

HANDY 93T

Type of connection

3/8 plastic 3/8 brass 1/2 plastic

✓

293 to 468

WRAS

Dimensions

3/8 or 1/2 brass 3/8 or 1/2 plastic

✓

Specif 18 to 50 18 to 50 18 to 50 18 to 50 18 to 50 18 to 50 10 to 42 Porcher

1/2 Plastic

Bottom inlet :

Side lever

285 to 450

3/8 Brass

Side inlet :

✓

272 to 480

Residual water level :

Inlet valves

✓

Cistern height (mm)

Small floater adjustable by notches

Set in the factory, it can be modified for some models.

✓

COMPACT 99B

The strainer which is common to all models in the range permits the use of a drainage hole of 58 to 72mm. The standardisation of the strainer enables you to change the upper part of the mechanism for another without having to take the cistern apart.

✓

Lever

Small flush adjustment : Drainage hole :

Single flush

COMPACT 99T

Just slide the stirrup clamp

✓

ROBECO 06

Each mechanism has an adjustable height range, which enables installation in most of the cisterns available on the market. The overflow can also be adjusted

Height adjustment :

✓

Interruptible button

Ø of lid hole (mm)

Standards

Cistern height :

✓

STANDARD 15EL

Most of the control buttons in the range are self adjusting, so do not require cutting to size.

✓

HANDY 93L

The whole range has the possibility of diameter overlap from 10 to 50mm (depending on the model) and most of them can accept excentricity

Dual flush

COMPACT 95L

Push buttons :

Adaptability

Cistern lid hole :

Type of control

Installation : easy adjustment

Type of Water closure supply

Mechanisms

OPTIMA 50

PRACTICALS INFORMATIONS

DUAL FLUSH MECHANISMS

Description Escutcheon : for lid holes from 18 to 50mm

OPTIMA 50

SASO

Dimensions

Push button : Small button = small flush Large button = large flush

Button fixing nut

above the lid

• Wire cable control, quick and easy to assemble

Compatible with : Lid hole (A), diameter from 18 to 50mm Drainage hole (D) diameter from 58 to 72mm

Wire cable : enables side control, (front or side excentricity)

Adjustable small flush cursor from 3 to 4.5L

• Pushbutton and escutcheon chrome finished C

• Adjustable small flush Adjusting stopper for residual water

• Adjustable residual water level • Delivered complete with cistern/bowl seal and screws

Strainer : made of ABS, ensures a powerful rinsing flow (2.75L/s) Bowl gasket, compensates for any irregularities of the ceramic.

OPTIMA 49

| WATERMARK

• Compact water saving mechanism

Escutcheon : for lid holes of 18 to 50mm

Stirrup clamp : height adjustable every 12mm

• Stirrup clamp type model which enables the fixation of lid and allows wide excentricity

Inner bottom of cistern

Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce water-tightness at the bottom of the cistern

Push button : Small button = small flush Large button = large flush

Button excentricity tolerance = +/- 15mm

above the lid

Overflow : precutted and adjustable every 4mm

Adjustable height (B) from 285 to 450mm

• Chrome finished push button and escutcheon Adjusting stopper for residual water

• Adjustable residual water level • Delivered complete with cistern/bowl seal and screws

SKIPPER 36A

| WATERMARK

Bowl gasket, compensates for any irregularities of the ceramic.

Escutcheon : for lid holes of 18 to 37mm and 44 to 50mm

Adjustable overflow height : 155 to 245mm (C)

Inner bottom of cistern

Valve gasket made of NR/EPDM, ensures perfect watertightness at the bottom of the cistern Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce water-tightness at the bottom of the cistern

Push button : Small button = small flush Large button = large flush

above the lid

Stirrup clamp : tolerates ordinary excentricity In old cisterns

Compatible with : Lid hole (A), diameter 18 to 50mm Drainage hole (D) diameter from 58 to 72mm

Overflow : precutted and adjustable every 5mm

• Water saving mechanism • Stirrup clamp type model which enables the fixation of the lid

• Chrome finished push button and escutcheon • Adjustable small flush • Delivered complete with cistern/bowl seal and screws

Strainer : made of ABS, very robust, ensures a powerful rinsing flow of 2.75L/s Bowl gasket, compensates for any irregularities of the ceramic.

42 |

Catalogue 2008/2009

Compatible with : Lid hole (A), diameter from 18 to 50mm Drainage hole (D) diameter from 58 to 72mm

• Self adjustable button (no rod to cut)

Strainer : made of ABS, ensures a powerful rinsing flow (2.75L/s)

Adjustable overflow height : 149 to 245mm (C)

Valve gasket made of NR/EPDM, ensures perfect watertightness

Adjustable small flush cursor from 3 to 4.5L

• Adjustable small flush

Adjustable height (B) with escutcheon: 272 to 480mm (Lid hole (A) diameter 18 to 37mm and > than 44mm.) Without escutcheon: 287 to 480mm (Lid hole A, diameter 38 to 44mm)

Floater, adjusts small flush volume from 3 to 4.5L

Adjustable overflow height : 180 to 240mm (C)

Valve gasket made of NR/EPDM, ensures perfect watertightness Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce watertightness at the bottom of the cistern

Adjustable height (B) : from 293 to 447mm (Lid hole (A) diameter 18 to 37mm) from 312 to 468mm (Lid hole A, diameter 38 to 44mm)

Inner bottom of cistern

Catalogue 2008/2009 | 43

Technical equipments

Overflow : precutted and adjustable every 4mm

• Compact water saving mechanism

Description Escutcheon : for lid holes from 18 to 37mm or > than 42mm

SWITCH 22A

Stirrup clamp : tolerates ordinary excentricity In old cisterns

• Stirrup clamp mechanism which enables the fixation of the lid

Dimensions

Push button : double action (x 2 = STOP)

above the lid Overflow : precutted and adjustable every 5mm

Compatible with : Lid hole (A), diameter 18 to 50mm Drainage hole (D) diameter from 58 to 72mm

• Self adjustable button (no rod to cut)

Adjustable height (B) : from 305 to 339mm (Lid hole (A) diameter 18 to 37mm) from 321 to 415mm (Lid hole A, diameter 38 to 42mm)

• Chrome finished push button and escutcheon

• Interruptible flush

Strainer : made of ABS, very robust, ensures a powerful rinsing flow of 2.75L/s

• Delivered complete with cistern/bowl seal and screws

Bowl gasket, compensates for any irregularities of the ceramic.

Escutcheon : for lid holes from 18 to 50mm

SKILL 51

Adjustable overflow height : 180 to 240mm (C)

Valve gasket : made of NR/EPDM, ensures perfect watertightness

Inner bottom of cistern

Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce water-tightness at the bottom of the cistern

Push button : single flush

A Button fixing nut

above the lid

Wire cable : enables side control, (front or side excentricity)

Compatible with : Lid hole (A), diameter 18 to 50mm Drainage hole (D) diameter from 58 to 72mm

Overflow : precutted and adjustable every 4mm

• Side wire cable, easy and quick to assemble

Adjustable height (B) with escutcheon: 272 to 465mm (Lid hole (A) diameter 18 to 37mm and > than 44mm.) Without escutcheon: 287 to 480mm (Lid hole A, diameter 38 to 44mm)

• Chrome finished escutcheon and button C

• Delivered complete with cistern/bowl seal and screws Strainer : made of ABS, very robust, ensures a powerful rinsing flow of 2.75L/s Bowl gasket, compensates for any irregularities of the ceramic.

STORM 33A

SASO

Escutcheon : for lid holes from 18 to 37mm or > than 42mm Stirrup clamp : tolerates ordinary excentricity In old cisterns

Inner bottom of cistern

Valve gasket : made of NR/EPDM, ensures perfect watertightness Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce water-tightness at the bottom of the cistern

Push button : single flush

above the lid Overflow : precutted and adjustable every 5mm

Compatible with : Lid hole (A), diameter 18 to 50mm Drainage hole (D) diameter from 58 to 72mm

• Stirrup clamp mechanism enabling the fixation of the cistern B

• Self adjustable button (no rod to cut) • Chrome finished push button and escutcheon • Delivered complete with cistern/bowl seal and screws

C Strainer : made of ABS, very robust, ensures a powerful rinsing flow of 2.75L/s Bowl gasket, compensates for any irregularities of the ceramic.

44 |

Catalogue 2008/2009

Adjustable overflow height : 180 to 240mm (C)

Inner bottom of cistern

Valve gasket : made of NR/EPDM, ensures perfect watertightness Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce water-tightness at the bottom of the cistern

Adjustable height (B) : from 305 to 339mm (Lid hole (A) diameter 18 to 37mm and > than 42mm.) from 321 to 415mm (Lid hole (A) diameter 38 to 42mm) Adjustable overflow height : 180 to 240mm (C)

Catalogue 2008/2009 | 45

Technical equipments

SINGLE FLUSH MECHANISMS

PULL FLUSH MECHANISMS

Description

Dimensions A

CLASSIC 42

Lever ring and washer: Needed for lid holes between 10 and 42mm

SASO

Control button: White or chrome

above the lid

Lever : tolerates ordinary excentricity in the cistern Overflow : adjustable, precutted every 5mm

• Pull up flusher for old cisterns

Valve gasket : made of NR/EPDM, ensures perfect watertightness

• Available with button and escutcheon, white or chrome

Strainer: made of ABS, very robust, Ensures a powerful rinsing flow (2.75L/s)

Compatible with : Lid hole (A), diameter 10 to 42mm Drainage hole (D) diameter from 58 to 72mm Adjustable height (B) : from 255 to 455mm

• Delivered complete with cistern/bowl seal and screws

Adjustable overflow height (C): 180 to 240mm Bowl gasket, compensates for any irregularities of the ceramic

Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce watertightness at the bottom of the cistern

Inner bottom of cistern D

Control button

Specific products

Lever Overflow : adjustable, precutted every 5mm

ASP 43 • Pull up flusher with chrome button for old Aspirambo Porcher cisterns • Delivered complete with seal flange and screws.

Strainer: made of ABS, very robust, ensures a powerful rinsing flow (2.75L/s) Adapted to the old ASPIRAMBO PORCHER cisterns

Valve gasket : made of NR/EPDM, ensures perfect watertightness

Special screws Seal flange

Control button

JD 44

Adapted to the old JACOB DELAFON cisterns

Valve gasket

Control lever

Special screws

Control button Lever

IS 40 Adapted to the old IDEAL STANDARD cisterns

• Pull up flusher with chrome button for old Ideal Standard cisterns • Delivered complete with cistern/bowl seal and screws Special screws Valve gasket

E Control rod

FR 41 • Single flush mechanism with front handle. • Delivered complete with cistern/bowl seal and screws

46 |

Catalogue 2008/2009

Control lever

Compatible with : Drainage hole (D) diameter from 58 to 72mm

Overflow : precutted and adjustable every 5mm Strainer: made of ABS, very robust, Ensures a powerful rinsing flow (2.75L/s)

Valve gasket made of NR/EPDM, ensures perfect watertightness

Strainer gasket, made of moulded SBS elastomer. Its elasticity and shape reinforce watertightness at the bottom of the cistern

Adjustable overflow height (C): 180 to 240mm Control rod lenght (E) : 350 mm

Catalogue 2008/2009 | 47

Technical equipments

• Pull up flusher with chrome button for old Jacob Delafon cisterns • Delivered complete with cistern/bowl seal and screws

Overflow

SIDE INLET VALVES

Description Hydraulic closure chamber

Membrane with insert

Filter

| DIN

• Hydraulic closure (no water hammer shock) • Adjustable water level • Silent • Anti-backflow function • Filter can be accessed without taking the water supply system apart • Nickel coated 3/8 brass end-fitting

HANDY 93L

110

Anti-backflow function

End-fitting 3/8 nickel plated brass

Water level adjusting screw, Adjustment range = 105mm

Compact sliding floater

250

COMPACT 95L

Dimensions

Instant mechanical closure

140 End-fitting 3/8 nickel coated brass

SASO

Water level adjusting screw, Adjustment range = 75 mm

250

• Mechanical closure, • Adjustable water level

Floater

• Nickel coated 3/8 brass end-fitting Sliding casing

STANDARD 15EL

Watel level adjustment screw

Technical equipments

110

270 Closure valve Brass rod

• Mechanical closure, End-fitting, 3/8 brass

• Adjustable water level

Expanded polystyrene floater

• 3/8 brass end-fitting 80 Rigid down-pipe

ROBECO 06

85 Closure valve

295

Aluminium rod

End-fitting, 3/8, plastic

• Traditional float valve

Expanded polystyrene floater

• Mechanical closure

8 Ø7

• 3/8 plastic end-fitting Rigid down-pipe

48 |

Catalogue 2008/2009

Catalogue 2008/2009 | 49

BOTTOM INLET VALVES

COMPACT 99B

Description |

Dimensions 90

Anti-backflow Hydraulic closure chamber Membrane with insert

• Hydraulic closure (no water hammer shock)

Water level adjustment screw, Adjustment range = 105mm

• Adjustable water level • Silent • Anti-backflow function • 3/8 brass end-fitting (available with 1/2 brass or plastic)

282

| WATERMARK

Compact sliding floater

Down-pipe

End-fitting, 3/8 brass, (also available in 1/2 brass and 1/2 plastic)

• Telescopic version available (3/8 brass, 1/2 brass or plastic)

99T

HANDY 93B

SASO

Instant mechanical closure by non return valve

107

Technical equipments

Water level adjustment screw, Adjustment range = 75mm

• Mechanical closure 287

Floater

• Adjustable water level Sliding casing

• 3/8 brass end-fitting (also available with 1/2 brass or plastic) • Telescopic version available, (3/8 brass, 1/2 brass or plastic

End-fitting, 3/8 brass, (also available in 1/2 brass and 1/2 plastic)

93T

BAS 26EL

• Hydraulic closure (no water hammer shock) • Adjustable water level • 3/8 brass end-fitting.

Compact sliding floater

290

Water level adjustment screw, Adjustment range = 110mm

Hydraulic closure chamber with membrane

End-fitting 3/8, brass

50 |

Catalogue 2008/2009

Catalogue 2008/2009 | 51

WC CLEANING SYSTEM Some things necessary to know !

Here are some results !

The partially stagnant water in a WC cistern and bowl is a real nest of germs (up to 100 million per litre of water). These micro-organisms are not only the source of many allergies, or illnesses, but they also cause other unwanted effects, such as furring on the walls of the equipment and the cistern, which in turn cause malfunctions and leaks. Unfortunately, that’s not all! This stagnant water favours the deposit and incrustation of limescale (up to 500 grammes per year, which also causes persistant micro-leaks, without even mentioning the dirty look of the bowl and blocked drain pipes. A toilet which leaks all the time, without knowing it, can waste up to 200 cubic metres per year, costing up to 500€ per year, depending on the cost of water. The proper maintenance of a WC (disinfectants, anti-limescale products, deodorants and other miracle products) consumes up to 25kg of chemical products, which will cost about 100€, while not caring much for the environment. All this is also back-breaking housework which will take about 50 hours per year!

Consumption of one single product which is nature friendly (less than 8kg per year for a family of 4 people) for an annual budget of less than 70€ and less than half an hour household tasks, all that for a healthy and fresh smelling WC!

A quick and easy installation

So, here is a new inovation ! MULTICARE WC® one simple action will clean, remove limescale, perfume and give a new look to your WC, prevent leaks and help maintain the equipment in the cistern.

Two-in-one !

Made of organic acids excluding the biocide (in compliance with the CE directive 98/8/CE), this product is not dangerous, (formula listed with the Anti-Poison centre of Paris : safety data sheet available on request, and complies with the following standards : NF T01/102 ISO 11014-1 and to the REACH directive.

Lid

The MK 3050W® uses, in its exclusive formula, natural essences made by an original perfume manufacturer in Grasse, worldwide perfume capital. Vents for diffusing the perfume Available in 2 scents : Country fields

Provence

• MULTICARE WC® is a

52 |

Catalogue 2008/2009

product.

2 fixing positions Fixation socket (3/8)

NB : 1 bottle = 500ml, contents of the doser, sold in packs of 2, is enough for about 500 flushes.

And here is the 2nd Novelty : The diffuser The other innovation of the MULTICARE WC® system is in its diffusion. The diffuser is comprised of a reservoir with 500ml capacity, a 2ml doser and a floater which ensures the opening and closing of the doser. After each toilet flush, the doser liberates the product all the time when the WC cistern is filling up with water again. The design of the doser enables it to re-load with MK 3050W® without wasting any product before it closes. Once it is installed, no further manipulation of the tank is needed. This is a system which is economical and precise avoids the usual saturation problem of products in permanent contact with the water. The contents of the diffuser being equal to that of the spares, there is no more need to store the opened product.

Doser

Pouring beak (external filling) Reservoir Useful capacity 500ml

Dimensions Width (L) Height (H) Depth (P)

90mm 190mm 105mm

Float (opening/closing)

Catalogue 2008/2009 | 53

Technical equipments

Here is the first Novelty : the MK 3050W® This product respects the environment, (100% biodegradable) and it replaces all these products generally used to maintain a WC. The MK 3050W® is a multi-function formula which eliminates limescale, removes fungus (humidity stains) acts against algae, kills bacteria, deodorises, perfumes, and all this without chlorine (compatible with sceptic tanks). Its blue colour prevents photosynthesis. This is a “universal formula” which prevents pollution of the cistern, ensures a shiny toilet bowl, helps the efficiency of the drainage system and perfumes the closet, while protecting the service life of the sealing joints!

FLEXIBLE PVC PIPES

Description

Dimensions 85 to 107

PA 2555

EPDM seal Cistern nozzle, ABS

250 to 550

• Stretchable pipe with shape retaining memory Body : Stainless steel spiral grooves, Polypropylene oversheath

• Multi-diametre stick-on seal • If you are renovating, this enables you to connect the bowl, whatever the drainage evacuation position (on the wall or the floor) with or without (large or small) excentricity

ABS nozzle, 4 diametres (90,93,100,110mm) 90 93 100 110

85 to 107

ES 400 / ES 550

ES 550

EPDM seal Cistern nozzle, ABS

85 to 107

ES 400 550

• Flexible pipe

• If you are renovating, this enables you to connect the bowl, whatever the drainage evacuation position (on the wall or the floor) with or without (large or small) excentricity ABS nozzle, 4 diametres (90,93,100,110mm)

90 93 100 110

87 to 107

Flexible sleeve

87 to 107

EVA

120

ME 100 120

MD 100 • Connecting sleeve made of EVA

100 to 110

• Available in straight or off-centered version • Available in 90 or 100mm diameter

Flexible flap

MD 90 54 |

Catalogue 2008/2009

88 to 98

ME 90

88 to 98

Catalogue 2008/2009 | 55

Technical equipments

400

Body : Stainless steel spiral grooves, Polypropylene oversheath

• Multi-diametre stick-on seal

RIGID WC PIPES

Description P 100

P 100

Dimensions

P 100R

Ø int. 40

Seal clamp

85 to 107

EPDM seal

350

• Long Elbow 90° bent pipe • Glueable M1 PVC • EPDM bowl seal

Body : M1 PVC

• Available with female 40mm diameter overlap Ø int. 94 Ø ext. 100

C 100M

C 100

C 100MR 85 to 107 120

Seal clamp

EPDM seal

• Short Elbow 90° bent pipe

Body : M1 PVC

Ø int. 94 Ø ext. 100

• Glueable M1 PVC

C 100FR 85 to 107 120

• EPDM bowl seal

C 100F

• Male and female versions available • Available with female 40mm diameter overlap

Ø int. 100 Ø ext. 106

85 to 107

Seal clamp

85 to 107

EPDM seal

M 100C 405

Seal clamp

• Glueable M1 PVC

Body : M1 PVC

190

• Straight pipe EPDM seal

• EPDM bowl seal • Short and long versions available

Ø int. 94 Ø ext. 100

Body : M1 PVC Ø int. 94 Ø ext. 100

R 180

113

Body : M1 PVC

M193 : PVC M1 repair sleeve for unsleeved drainage tubes Ø 100mm R 180 : PVC M1 reducer for connecting between non sleeved drainage tubes, Ø 80 and 100mm

Ø ext. 106 Ø int. 100

113

Connections and reducers

M 193

R 190

R 110

Ø ext. 73

Ø ext. 93

R190 : PVC M1 reducer for connecting between non sleeved drainage tubes, Ø 80 and 100mm R110 : PVC M1 connection for joining between non sleeved drainage tubes, Ø 100 and 110mm. 56 |

Catalogue 2008/2009

Ø 83

Ø 103

Catalogue 2008/2009 | 57

Technical equipments

M 100

M 100L

toilet seats are compatible with the main standard toilet bowls. The range comprises models made of antistatic polypropylene, thermoset and MDF. Some of them receive antibacterial treatment Difference between bactericidal and antibacterial: Antibacterial treatment stops the spread of germs, whereas a bactericidal agent destroys them. has opted for several years for the bactericidal solution for its seats. The efficiency of this method has been tested in laboratory and hospital environment. Depending on the models a wide range of hinges is available: Bar or individual hinges, quick-release, soft-closing, polyamide or stainless steel.

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Thermoset

Type of fixation Other information Dimensions

✓ ✓

Bar-hinge + metal screws

✓ ✓ ✓ ✓ ✓

Individual plastic hinges + metal screws

Bactericidal treated Quick release Soft closing

HORIZON

✓ ✓

MDF

Individual metal hinges + metal screws

FOREST

✓ ✓ ✓ ✓ ✓ ✓

Bar-hinge + quick fit plastic screws

✓

✓ ✓ ✓ ✓

✓

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

✓ ✓

Lenght (in mm)

422

446

414

445

425

440

460

455

460

475

446

445

435

Width (in mm)

361

375

370

361

360

375

380

367

380

375

365

90 90 Bowl inter axis 107 125 125 144 130 125 133 132 123 123 135 130 133 133 (in mm) to 211 to 177 to 185 to 166 to 165 to 175 to 175 to 172 to 158 to 158 to 180 to 165 to 175 to 175 to 190 to 190 Front/back adjustment (in mm)

58 |

MONACO

MONTE CARLO

OPIO Public areas

OPIO

VALLAURIS

GENERATIONS

ANTI-CONTACT

MENTON

PRINCIPAUTE

BEAULIEU Public areas

BEAULIEU

ESTEREL

CAP FERRAT

Polypropylene

+/- 15 +/- 15 +/- 10 +/- 15 +/- 15 +/- 20 +/- 15 +/- 15 +/- 5 +/- 5 +/- 15 +/- 15 +/- 15 +/- 15 +/- 25 +/- 25

Catalogue 2008/2009

Toilet seats

Material

VENCE

For specific uses, the range also comes with special solutions

THERMOSET TOILET SEATS

VENCE

Description

Dimensions

Material : Bactericidal Thermoset

361 Shock absorbers : - 4 for the seat - 2 for the lid

+/- 15

422

• 2 Kg • Soft closing, fixation by stainless steel hinges • Bactericidal • Only available in white

107 to 211 Soft closing adjustable stainless steel hinges, quick-fit washers.

CAP FERRAT

Material : Bactericidal Thermoset

375 Shock absorbers : - 4 for the seat - 2 for the lid

• Stainless steel hinges

+/- 15

446

• 2,9 Kg

• Bactericidal • Only available in white

130 to 165 Adjustable stainless steel hinges, quick fit washers

445

• Fixation by quick release Bar-hinge with metal screws, exists in a special version for collective use (stainless steel hinges) • Bactericidal • Available in white, Manhattan, Bahamas, Pergamme, pearl blue, pastel green.

144 to 166 Quick release Polyamide adjustable bar-hinge: metal screw

60 |

Catalogue 2008/2009

Catalogue 2008/2009 | 61

Toilet seats

Shock absorbers : - 4 for the seat - 2 for the lid

+/- 15

BEAULIEU

361 Material : Bactericidal Thermoset

THERMOSET TOILET SEATS

Description

Dimensions 370

ESTEREL

Shock absorbers : - 4 for the seat - 2 for the lid

Material : Bactericidal Thermoset

+/- 10

414

• 2,3 Kg • Quick release stainless steel hinges • Bactericidal • Only available in white 125 to 185

Quick release metal hinges, Non-slip pads, metal screws

PRINCIPAUTÉ

360 Shock absorbers : - 4 for the seat - 2 for the lid

Material : Thermoset

425

+/- 20

• 1,8 Kg • Plastic hinges • Rectangular shaped • Only available in white 125 to 175

Adjustable polyamide individual hinges, metal screws.

Material : Thermoset

440

• 1,5 Kg

+/- 15

MENTON

375 Shock absorbers : - 4 for the seat - 2 for the lid

• Bar-hinge with metal screws • Available in white or black 133 to 175

Polyamide adjustable bar-hinge, metal screws.

380

Material : Thermoset

460

• Fixation by Bar-hinge with metal screws

+/- 15

• 1,4 Kg

• Special anti-contact • Only available in white • Available in single version (seat only) or double version (seat and cover) Polyamide adjustable bar-hinge, metal screws.

62 |

Catalogue 2008/2009

132 to 172

Catalogue 2008/2009 | 63

Toilet seats

ANTI-CONTACT

Shock absorbers : Built-in

POLYPROPYLENE TOILET SEATS

Description

Dimensions 380

Material : Antistatic polypropylene

455

• 2,4 Kg • Built-in child seat • Soft closing • Bar-hinge with metal screws • Only available in white

+/- 5

GENERATIONS

Shock absorbers : - 4 seat shock absorbers

123 to 158 Soft closing adjustable bar-hinge, metal screws

380

+/- 5

Material : Antistatic polypropylene

460

VALLAURIS

Shock absorbers : - 4 seat shock absorbers

• 1,8 Kg • Soft closing • Bar-hinge with metal screws • Only available in white

123 to 158 Soft closing adjustable bar-hinge, metal screws

367

OPIO

+/- 15

475

Material : Antistatic polypropylene

Shock absorbers : - 4 seat shock absorbers, - 2 lid shock absorbers

• 1,7 Kg • Bar-hinge with metal screws, also exists for collective use, (stainless steel hinges) • Available in white, manhattan, bahamas, pergamme, pearl blue, pastel, green 135 to 180

Adjustable polyamide bar-hinge, metal screws

380

+/- 15

Material : Antistatic polypropylene

446

MONTE-CARLO

Shock absorbers : - 4 seat shock absorbers, - 2 lid shock absorbers

• 1,4 Kg • Bar-hinge with metal screws • Available in white, anthracite, manhattan, bahamas, pergamme, pearl blue, pastel green.

133 to 175 Adjustable polyamide bar-hinge, metal screws

Built-in shock absorbers (easy clean)

+/- 15

Material : Antistatic polypropylene

445

MONACO • 0,9 Kg • Bar-hinge with plastic screws and quick fit washer • Available in white and anthracite.

quick fit ①

②

③

133 to 175 Adjustable polyamide bar-hinge, plastic screws with quick fit washer

64 |

Catalogue 2008/2009

Catalogue 2008/2009 | 65

Toilet seats

375

MDF TOILET SEATS

Description

Dimensions

FOREST Material : Waterproofed MDF anti UV

• 2,8 Kg

365

Shock absorbers : - 4 for the seat - 2 for the lid

• Anti UV, waterproofed • Whithstands cleaning products and scratches

430

• Chromed zamac individual hinges and metal screws, with centering rod • Available in wood finishes

1 - Traditional light colour 2 - Traditional dark colour 3 - Trendy light colour 4 - Trendy dark colour 5 - Trendy purple 6 - Trendy metallic effect

Adjustable chromed zamac hinges with metal screws

HORIZON

Material : Waterproofed MDF anti UV

365

Shock absorbers : - 4 for the seat - 2 for the lid

• 2,8 Kg • Anti UV, waterproofed

430

• Whithstands cleaning products and scratches

Toilet seats

• Chromed Zamac individual hinges and metal screws, with centering rod • Available in a wood finish :

1 - Snow (white) 2 - Night (black) 3 - Marine (blue) 4 - Metal (grey)

Adjustable chromed zamac hinges with metal screws

66 |

Catalogue 2008/2009

Catalogue 2008/2009 | 67