Generator Problems Effective toubleshooting

Troubleshooting Most Common Generator Problems

Generators are very important in case of extended power outages. However just like any other machine, generators can malfunction and fail to serve their purpose. In that case, troubleshooting generator problems is quite important to ensure your generator operates in tip top shape.

The following are a few common problems that may cause your generator to malfunction:

The generator won’t start: This may be caused by two factors: Lack of fuel: Lack of fuel or low quality fuel are often reasons generator-set engines fail to start. Fuel quality is very important for the smooth running of the generator and should always be checked. You should always ensure water or other contaminants are not in the fuel or in the unit’s filtration or delivery systems. Low battery: 80% of generators’ failures to start are due to faults in the set’s battery. Weak or low charged batteries are quite common. Even a well-charged, wellmaintained lead-acid battery will deteriorate over time. You should always ensure that the battery holds a proper charge and if it no longer does that, you have to replace it.

Low on coolant: A generator may sound an alarm or simply shut down when the coolant level is low; this may be caused by a failed block heater. Not all generators are equipped to detect low coolant levels; instead, there is an alarm when the temperature of the coolant is rising. When this happens, add more coolant if levels are low, but if it persists you may need to check for a leak. Leaks commonly source back to the block heater hose since the block heater produces so much heat, which has the most contact with the hose, leading to faster wear and tear.

Block heater wear and tear: The block heater is tasked with heating the coolant so that it circulates the engine block and keep the engine block warm to prevent thickening of oil. Since it runs all day there is an aspect of wear and tear that affects it functionability. Despite the fact that

block heaters are often used in cold climates to start the engine, they are also essential in warm climates because they reduce wear and tear by maintaining more consistent temperatures throughout the cooling system.

Leaks: A generator could be suffering from oil, fuel, or coolant leaks. The most common cause of fuel leaks in newer generators is not getting enough use, while in older generators, bad belts are more likely associated with a leak in a line or check valves failing to store fuel in engine. Nevertheless, what might seem like an oil leak in some instances is actually the result of engine slobber or wet stacking. This is the accumulation of unburned fuel, carbon particles, condensed water, and acids in the exhaust system. Legitimate leaks can occur when there is a block in the heater hoses. This can lead to extreme temperatures that can affect the hoses. Another common cause of leaks is overfilling of the base tank.

Not in Auto: Generators have control panels that allow operators to manage their settings. The panels display important engine and alternator information. If the machine reads ‘Not in Auto,’ or something like ‘breakers open,’ ‘emergency stop buttons activated,’ it has likely been switched into “’Off/Reset’ via the main control switch. To fix this issue, the generator must be physically reset to turn off the alarm.

YOU NEED, ANY TIME, ANYWHERE

GENERATORS SALES, INSTALLATION & MAINTENANCE

FULL RANGE: 1KVA - 4200 KVA

Market leader in Generator sales, installations and back up support in Kenya.

More than 25 years of KOHLER-SDMO (France) generator distributorship within Kenya and Uganda.

RYCE EAST AFRICA KAMPALA ROAD INDUSTRIAL AREA 020 653 1786 +254 733 714 108 / +254 734 800 201 ryce@ryce.co.ke www.ryce.co.ke

HANSGROHE AND YOU Your preferred partner on projects!

Whether you’re working on your home, or are in the commercial, residential, or hospitality sector, hansgrohe is the partner you need to integrate planning, supply and quality design, every time.

Why Hansgrohe? hansgrohe is the ultimate partner to retail and trade, consistently delivering the highest quality, tailored goods and services is what makes them an industry leader in luxurious taps and showers. Quality is the cornerstone of hansgrohe’s corporate philosophy and long-standing commitment to be right by your side.

“We assure you, that you can always put your trust in our quality promise, made by hansgrohe, before, during, and after installation,” says the official hansgrohe spokesperson.

Ensuring precision hansgrohe has, over its illustrious history, developed a tried and tested method for delivering projects with perfection. The process has been honed, cultivated and shaped into a model of flawless collaboration, so that you get the most out of your project, every time, hand-in-hand with hansgrohe.

Whether you have questions, problem queries, recommendations or specific wishes, hansgrohe is at your service, conducting regular site visits for ultimate peace of mind. All work comes with a 5-year guarantee, unique, cutting-edge innovation and more than 600 design awards in tow.

From consulting on the technical specifications and ensuring there is adequate supply during planning, to delivering on time, every time, plus holding plumbers accountable through the highest level of training, you can rest assured that your project will embody the same values and ethos that has tipped the spear for more than a hundred years.

Commercial From imposing, environmentally-conscious corporate giants on the Johannesburg skyline to companies whose reach transcends national borders, hansgrohe’s commercial footprint extends the world over; in shopping centres, business hubs and high-tech skyscrapers that are fitted with trademark German luxury and precision. hansgrohe’s pride lives on in every completed project, in every corner of the globe.

Residential hansgrohe’s showers and taps bring elegance and understated beauty to homes and residential developments. An eclectic mix of hansgrohe products adorns many houses, apartment buildings and estates, creating the ideal balance between opulence and modern functionality; with perfectly crafted products to suit the individual requirements of each room. Hospitality

It is no surprise that hansgrohe products have been featured in a number of exquisite developments in the hospitality industry, primed as they are for exuding class and luxury. Low-flow fittings on taps and shower heads complement some of the world’s finest hotel rooms – the epitome of Sustainable by Design.

Partners at Home hansgrohe products are used in buildings all over the world, as the company supplies products to over 140 countries, and directly into the homes of the people. It goes without saying that Hansgrohe are the preferred partners on projects for everyone.

So what’s your next project… and how can hansgrohe help?