purSonic gmbh Rengoldshauser Straße 4 88662 Überlingen Germany Phone +49 (0)7551 - 8099 -155 Fax +49 (0)7551 - 8099 -154 info@pursonic.com www.pursonic.com
INNOVATIONS IN SOUND
+49 (0) 7551 - 80 99 - 155
Page 2/3
DESIGN PURE AND MUSIC PURE – WE ARE COMMITTED TO BOTH pursonic flat panel loudspeakers In contrast to other flat panel loudspeakers, the flat panel loudspeaker diaphragm specially developed by purSonic can be used with glass and tiled surfaces and even absorbing wall and ceiling surfaces. It offers an unsurpassed degree of flexibility in terms of finishes and geometry. Possible finishes include: paint, plaster, wallpaper, tiles, ceramics as well as wood and plastic panels and metal sheets. The geometry of the Soundboards can be chosen as desired to suit architectural requirements. The Soundboards can even be adapted when they are already at the installation site. purSonic Soundboards are very easy to install – almost like inserting a piece of plasterboard. Depending on the application, the Soundboards can be inserted directly into the surface (instead of plasterboard), glued into a
milled-out section from the back (e. g. a wooden panel) or glued to the back of a surface (e. g. a mirror). The power load of the flat panel speakers ranges from 20 to 400watts and more. The load increases in steps of 20 watts. The sound is spread over an angle of up to 180°. An amplifier with integrated signal processor has been specially developed for the purSonic Soundboards in order to achieve optimum audio quality. The instrument can be controlled from the front panel, by infrared remote control (IR) or via the integrated RS 232 port. The Soundboards are generally compatible with conventional amplifier and control technology and have a high degree of operational safety.
+ Technology in all surfaces Mounted on or in the wall, the ceiling or in the floor – Soundboards can be installed anywhere in the room.
From background sound to home cinema in Dolby 5.1 – everything is possible. In addition to domestic applications, purSonic Soundboards can also be used in public areas or in sensitive environments, for example where hygiene regulations, safety requirements, protection against vandalism, listed buildings etc. are involved. They achieve good speech quality even in difficult acoustic surroundings. On the next page, you will find the made-to-measure range of purSonic Soundboards.
=
CONVENTIONAL TECHNOLOGY Conventional loudspeaker solution for Dolby 5.1. Only one spot receives the optimum sound.
purSonic’s TECHNOLOGY Dolby 5.1 with purSonic Soundboards: Noticeably improved acoustics filling the room with sound.
+49 (0) 7551 - 80 99 - 155
Page 3/3
FLAT PANEL LOUDSPEAKERS IN OVERVIEW – SOUNDBOARDS MAKE ALL THE DIFFERENCE People’s requirements are different. purSonic Soundboards are different, too. Soundboards are available in a wide variety of different lines to suit different applications and purposes.
APPLICATIONS
Soundboard 100
Soundboard 200
Soundboard 300
Soundboard 400
Soundboard 800
It is compact and versatile: “The smart solution”
The classic of the series: “The all-round solution”
Comes in all shapes and sizes such as round, oval, square and diamondshaped: “The bespoke solution”
For those who like that little bit extra e.g. for the home cinema: “The power solution”
Use the Soundboard as a design element in your room, as a picture or projection area 78“ x 98“: “The visible solution”
150 × 200mm min. 30mm DM-PUL 8 Ohm 70/100V 100Hz – 19kHz 20W
500 × 625/700mm min. 50mm DM-PUL 4–8 Ohm 70/100V 80Hz – 19kHz 30 – 60W
application specific min. 30mm DM-PUL 4–8 Ohm 70/100V 80Hz – 19kHz 20 – 400W
625 × 1000/2000mm min. 30mm DM-PUL 4–8 Ohm
application specific 35mm (mounted depth) DM-PUL 4–8 Ohm 70/100 V 80Hz –19kHz 120 – 400W
SYSTEM AMPLIFIER (optional)
INSET INTO CEILING WALL-MOUNTED INSET INTO WALL INSET INTO FLOOR
DIMENSIONS INSTALLATION DEPTH OPERATING PRINCIPLE LOW IMPEDANCE OPTIONAL HIGH IMPEDANCE FREQUENCY RANGE POWER LOAD
80Hz – 19kHz 100 – 400W
• digital amplifier 2 ×/4 × 80W • digital amplifier 150 MIPS • high quality converters (DAC) 24 bit / 96kHz • FIR Filter • IIR Filter • freely programmable • 10 user presets • RS-232 control interface • IR remote control • networkable • 19“ rack compatible
02/2008 · Our flyer provides advice which is correct according to the best of our knowledge, but is not legally binding. Subject to technical modifications.
ONE PROGRAMME FOR ALL THE SENSES