CQ Black Raspberry Açaí Orange Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Black Raspberry Açaí Orange Puree • 10 Hard Navel Oranges - 68 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Black Raspberry Açaí Jalapeño Mint Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Black Raspberry Açaí Orange Puree • 6 Jalapeños - 12 slices • 14 Fresh Mint Stalks • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Apple Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 12 Hard Lemons - 56 slices • 2 Granny Smith Apples - 12 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Basil Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients • 1 Pouch of CQ Lemon Puree
• 6 Hard Lemons - 28 slices • 6 Fresh Basil Stalks • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Cantaloupe Honeydew Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 1 Cantaloupe - 4 slices • 1 Honeydew - 4 slices
• 5 Hard Lemons - 30 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Ginger Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients • 1 Pouch of CQ Lemon Puree
• 6 Hard Lemons (28-32 slices) • 2 Large Pieces of Ginger Root - 4-8 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Kiwi Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 6 Hard Lemons - 28 slices • 4 Hard Kiwis - 20 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Mango Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 6 Hard Lemons - 28 slices • 2 Hard Mangoes - 8 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Mint Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 6 Hard Lemons - 28-32 slices • 12 Fresh Mint Stalks • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Orange Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 4 Hard Lemons - 24 slices • 6 Hard Navel Oranges - 40 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Cucumber Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 9 Hard Lemons - 44 slices • 2 Large Cucumbers - 12 long slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Pineapple Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 1 Pineapple - 12 slices • 2 Hard Lemons - 8 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree, cayenne pepper and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Lemon Watermelon Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Lemon Puree • 5 Hard Lemons - 24 slices • 1 Mini Watermelon - 5 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Mango Ginger Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Mango Puree • 2 Large Ginger Roots - 8 slices • 3 Mangoes - 12 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Mango Orange Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Mango Puree • 3 Hard Navel Oranges - 20 slices • 2 Hard Mangoes - 8 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Mango Pineapple Orange Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Mango Puree • 1 Hard Mango - 4 slices • 1 Hard Pineapple - 8 slices • 12 Fresh Mint Stalks
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Mango Mint Pineapple Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Mango Puree • 1 Hard Mango - 4 slices • 1 Hard Pineapple - 8 slices • 12 Fresh Mint Stalks
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Mango Watermelon Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Mango Puree • 1 Mini Watermelon - 5 slices • 1 Hard Mango - 4 slices • 3 Gallons of filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Passion Fruit Orange Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Passion Fruit Puree • 7 Hard Navel Oranges - 68 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Passion Fruit Pineapple Lime Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Passion Fruit Puree • 1 Hard Pineapple - 12 slices • 3 Hard Limes - 12 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Passion Fruit Pineapple Orange Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Passion Fruit Puree • 1 Hard Pineapple - 12 slices • 2 Hard Navel Oranges - 8 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Peach Ginger Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Peach Puree • 4 Hard Peaches - 16 slices • 2 Hard Ginger Roots - 8 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Peach Lemon Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Peach Puree • 3 Hard Peaches - 12 slices • 12 Hard Lemons - 56 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Peach Pear Ginger Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Peach Puree • 5 Hard Peaches - 24 slices • 2 Large Ginger Roots - 4 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Peach Pineapple Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Peach Puree • 1 Hard Pineapple - 12 slices • 2 Peaches - 8 slices
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Peach Pineapple Kiwi Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Peach Puree • 1 Hard Pineapple - 12 slices • 4 Large Kiwis - 24 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Red Raspberry Pomegranate Orange Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Red Raspberry Pomegranate Fruit Puree • 7 Hard Navel Oranges - 48 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Red Raspberry Pomegranate Star Fruit Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Red Raspberry Pomegranate Fruit Puree • 12 Large Star Fruit - 28 slices • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Strawberry Basil Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Strawberry Puree • 12 Stalks of Basil • 3 Gallons of Filtered Water
the Beverage Dispenser 2 Decorating To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
the Water 3 Infusing Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
Serving & Refreshing 4 Filling, Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Strawberry Dragon Fruit Star Fruit Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Strawberry Puree • 1 Dragon Fruit - 12 slices • 2 Star Fruit - 24 slices
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Strawberry Kiwi Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Strawberry Puree • 7 Kiwis - 28 slices
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com
CQ Strawberry Watermelon Mint Infused WaterAid® 1 pouch recipe will fill our 3.5-gallon beverage dispenser twice
1 Ingredients
• 1 Pouch of CQ Strawberry Puree • 1 Mini Watermelon - 5 slices • 12 Fresh Mint Stalks • 3 Gallons of Filtered Water
2 The Perfect Slice: Put away your chef knife
USING A SLICER OR MANDOLIN ONLY, cut a test slice and compare it to the CQ Slicer Key/Wand’s handle. Adjust your slicer or mandolin until your slices match the thickness of the CQ Slicer Key/Wand. Once calibrated, slice up all ingredients as necessary.
3 Decorating the Beverage Dispenser To set the insert in place, position a slice at each corner of the jar between the insert and the jar. Use the CQ Slicer Key/ Wand to push the slices all the way down. Decorate the rest of the jar using the CQ Slicer Key/Wand to position the remaining slices as shown in the picture.
4 Infusing the Water
Using the CQ Slicer Key/Wand to measure the water level, fill the CQ Mixing Bucket with 3 gallons of cold, filtered water. Add 1 pouch of CQ Puree and stir. Next, place a metal strainer in the mixing bucket and muddle any remaining slices. This technique will ensure that no pieces end up blocking the spigot later.
5 Filling, Serving & Refreshing Fill the beverage container to the top with ice cubes (about 10 lbs.) and add the CQ Infused WaterAid®. To refresh, add equal amounts of ice & CQ Infused WaterAid®.
CQ Infused Beverages, LLC Subscriber Portal: account.cqbeverages.com Phone: (877) 416-2646 • Email: support@cqbeverages.com