Description:What is TS? What are the features of TS? How to add music to TS by idoo Video Editor? How to convert TS into other formats by idoo Video Editor?
How to adding music on TS? A period of TS stream must contain PAT packet, PMT packet, multiple audio and video packets, many PCR packets and other packets. TS, with the full name of MPEG2-TS, is the abbreviation of Transport Stream. Each packet is transmitted one by one. The length of every packet is about 188 bytes (also 192 and 204 bytes). The packet structure contains: firstly, a four-byte head, and the first byte is 0×47; the load is 184 bytes. TS stream can be filled in many kinds of data, like video, audio, custom information, etc. MPEG2-TS is mainly used in the real-time transmission programs, such as real-time TV programs. MPEG2-TS is characterized by supporting independent decoding starting from any segment of video stream. To put it simply, the entire file can not be decoded if any footage of VOB file on DVD was cut or its data was corrupted, but TV programs can be decoded or watched when you turn on TV at any time. Thus, TS has a strong adaptability. However, because it’s not one of the most major format, we need to convert its format in many cases. idoo Video Editor is an easy-to-use video editing and converting software. For video and audio of all the formats, idoo Video Editor can support such advanced editing as cut, merge, trim, add subtitles, add music, etc. While editing, it can also select output format as one of almost all the formats. So, it’s very easy to add music to TS and convert TS into other mainstream formats like AVI by idoo Video Editor. Then, we will show you how to make it according to the following tutorial. Here is a FAQ. “ I need to add my own dubbing to a TS file and convert its format into AVI. How do I do this?” 1. Run idoo Video Editor and open “ Advanced Cutter”. Open “ Add Music” to load TS file which needs to be edited. Click “ Load Music” to load dubbing file, and set this dubbing file when to start and end in the video. See picture below.
(add-music-to-ts1.png) 2. When all settings done, click “ Output Settings� to set output format as AVI. See picture below.
(add-music-to-ts2.png) 3. Click “ Start�, and we can get the desired video when all editing finishes. See picture below.
（add-music-to-ts3.png）