McKissick®® Snatch Blocks Blocks McKissick and Derrick Blocks Blocks Snatch Snatch blocks blocks for for all all your your energy energy applications applications
Offshore
McKissick®® 430L 430 Snatch Blocks withwith Hook & Latch Snatch Blocks Hook
Land Based McKissick® 419 Snatch Blocks with Shackle
McKissick® 406 Tail Board
McKissick® 491 Tower/Derrick Hoist Blocks (M-491S is shown)
English - Metric
McKissick® Snatch Blocks and Derrick Blocks SEE APPLICATION AND WARNING INFORMATION
on pages 358-365 of the General 2011 Catalogue Para Español: www.thecrosbygroup.com
M-491 Tower/Derrick Hoist Blocks New design provides the dependability of standard McKissick® snatch blocks, along with Tower Erection Erection features that make it perfect for the challenging needs of Tugger Hoist and Tower applications. A wide wide variety variety of of confi configurations: •• A gurations: oo 4, 15, 25 25 and 4, 8, 8, 12, 12,15, and 30 30 metric metric ton ton capacity capacity oo 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 7/8”, wireline sizes sizes // 10 10 to to 32 32 mm mm wire wireline 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 7/8”, 1” 1” and and 1-1/4” 1-1/4 wireline linesizes sizes oo Painted Painted or or Galvanized Galvanized finish finish • 8” and 10” blocks furnishedwith withdual dualrated ratedwireline wirelinesheaves sheaves • 8” and 10” block furnished • Forged steel swivels, tees, yokes and shackles are Quenched & Tempered. • Forged steel swivels, tees, yokes and shackles are Quenched & Tempered. • Sheave lubrification through center pin for easy maintenance. • Sheave lubrification through center pin for easy maintenance. • Design factor of 4 to 1 • Design factor of 4 to 1 • All blocks 14” and larger are furnished with McKissick® Roll Forged™ sheaves with flame hardened • All blocks 14” and larger are furnished with McKissick® Roll Forged™ sheaves with flame hardened grooves. grooves. • Recessed • Recessed sideplate side platedesign designreduces reducesthe thegap gapbetween betweenthe thesheave sheaverim rimand andthe thesideplate, side plate,allowing allowingthe thesheave sheave
McKissick®® M-491 M-491 Tower/Derrick Tower/Derrick Hoist Hoist Blocks Blocks (M-491G is shown)
assembly assembly to to be be captured captured in in the the block block ifif loss loss of of center center pin pin occurs. occurs. • Sealed Sealed tapered tapered roller roller bearings bearings extend extend the the life life of of the the center center pin pin and and bearings, bearings, and and allows allows for for faster faster line line speeds than recommended with standard snatch blocks. speeds than recommended with standard snatch blocks. •• Shackle Shackle fitting fitting swivels swivels for for easy easy positioning. positioning. • Suitable Suitable for contingent upon allall employees, including thethe winch operator, trained to to folforhoisting hoistingpersonnel, personnel, contingent upon employees, including winch operator, trained low any applicable Federal, local and industry standards. follow any applicable Federal, local and industry standards. Tugger/Derrickapplications: applications:API APIRP54 RP54 oo Tugger/Derrick Towerapplications: applications:OSHA OSHAdirective directiveCPL CPL2-1.36 2-1.36 oo Tower •• Holes Holes through through sideplates side platesare areavailable availablefor forsecondary secondaryblock blocksecurement securementdevice. device. •• Manufactured Manufactured by by an an API API Q1 Q1 Certified Certified facility facility •• Type TypeApproved Approved and and certification certification inin accordance accordance with withABS ABS 2006 2006 Steel SteelVessel Vessel Rules Rules 1-1-17.7, 1-1-17.7,and andABS ABS Guide Guide for Certification and Cranes. for Certification and Cranes. • All sizes are RFID EQUIPPED. • All sizes are RFID EQUIPPED.
Sheave Diameter (Inches)
WLL (t) WLL (t)*4
Sheave Diameter (Inches)
Wire Rope Size 8 (mm)
48
8
1010 - 13
8
10
10 - 13
8
8
12 12
10
10
13 - 14
Wire Rope Size (mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
J (mm)
K (mm)
L (mm) M
(mm) 10-13
B (mm) 226
C (mm) 48
D (mm) 28
E (mm) 171
F (mm) 159
G (mm) 81
H (mm) 102
J (mm) 18
(mm) 22
(mm) 51
(mm) 16
10-13 226
A
K
L
48276
2857
38 171
213 159
197 81
84 102
159 18
32 22
3851
8616
3219
276
13-14
57
38
213
197
84
159 84
32 159
38 32
3886
8632
25
276
57
38
213
197
213 197
197 83
159
32
38
86
32
197 84
2020833
32
3225
25 2021118 2021118 25 2021136 2021136
2020833
3857
264 38
248 264
83 248
83 159
159 32
38 32
3886
8632
3225
12
14
19
378
57
38
264
248
83
60
305
298
97
32
25
1515
16
16 25
22 432
77432
6077
60 305
305 298
298 97
170
86
25
77
38
32
432
32
86
22
159
38
16
83
32
15
248
159
97 170
170 44
44 40
4079
7938
3832
32 2021190 2021172
2021181 2021199
2515
18
16 28,6
483 25
102432
6477
384 60
365 305
170 298
246 97
80 170
44 44
122 40
7951
3870
32 2032312 2021190
2032315 2021199
30
20
533
134
89
445
419
260
325
100
71
179
64
83
32
38
264
44
38
40
38
86
57378
32
32
2020824
378 16
159
159
25
14 16
57
83
2020815
2020824
32
25
2020815 2020170
2020806
14
378
38 213
213
M-491G Stock No. 2020170 Galvanized
10
19
57 38
38
Painted 25 2020161 2020806
1212
14
276 57
57
M-491S
19 Stock No. 2020161
M-491G Stock No. Galvanized
1013 - 14
12
13-14 276
276
M-491S Stock No. Painted
M (mm)
86
79
38
32
2021127 2021127 2021145 2021145
2021154
2021163
2021172
2021181
2021154
2032321
* Ultimate load is 4 times the Working Load Limit
2021163
3032324
NOTE: all dimensions are for reference only, dimensions may change at any NOTE: All dimensions are for reference only, dimensions may change at anytime timewithout withoutprior priornotice. notice.Dimensions Dimensionsare arerounded rounded––no nodecimals. decimals.
2
2011 Crosby Europe n.v. All rights reserved copyright © 2008
McKissick® Snatch Blocks and Derrick Blocks 418L, 419 & 404 SNATCH BLOCKS
SEE APPLICATION AND WARNING INFORMATION
on pages 358-365 of the General 2011 Catalogue Para Español: www.thecrosbygroup.com
New Improved Light Champion • Forged alloy heat treated hooks. • Forged steel swivel tees, yokes and shackles.
• Can be furnished with hook latch.
• Hook and shackle assemblies on 4-1/2” through 14” sizes can be interchanged.
• Pressure lube fittings.
• Can be furnished with bronze bushings or roller bearings.
• 3” - 10” / 76mm - 254mm feature dual rated wireline sheaves.
• Opening feature permits insertion of rope while block is suspended from gin-pole.
• Fatigue rated.
• 3” thru 18” 418 and 419 blocks have exclusive bolt retaining spring to assure lost bolts.
• 4-1/2” and larger are RFID EQUIPPED.
Stock No. Weight Each (kg.) Sheave Wire Working Rep. Rep. Bearing 418L with with Diameter Rope Size Load Limit 418L Sheave Latch 418 with 419 with 404 418 with 419 with 404 Code Hook & Hook & (Inches) (mm)* (t)† Hook Hook Shackle Tail Board Stock No. Stock No. Latch& Shackle Tail Board Latch
418L 418 withwith Hook & Latch Hook
419 with Shackle
*3
BB
8-10
2
-
1,90
-
460147
-
** 3
BB
108040 109037 † 102016
-
109091
-
8-10
2
2,04
1,81
1,22
460147
1096421
**4-1/2
BB
108067
109064
102025
10-13
4
5,31
5,44
2,99
2000232 1096468
6
BB
108129
109126
102098
8
12,2
12,6
6,80
460815
1096562
6
RB
108156
109153
102114
8
12,2
12,6
6,80
472688
1096562
8
BB
108227
109224
102169
8
15
15,4
9,53
461164
1096562
8
RB
108254
109251
102187
8
15
15,4
9,53
473277
1096562
10
BB
108325
109322
102230
8
18,6
19,1
13,2
461805
1096562
10
RB
108352
109359
102258
8
18,6
19,1
13,2
473776
1096562
12
BB
169171
202961
178890
8
21,8
22,2
16,3
462270
1096562
12
RB
199913
169347
178934
8
21,8
22,2
16,3
474141
1096562
12
BB
108423
109420
102301
8
21,8
22,2
16,3
462289
1096562
12
RB
108460
109457
102329
8
21,8
22,2
16,3
474150
1096562
14
BB
194922
169356
-
8
24,9
25,4
-
463625
1096562
14
RB
199950
167857
-
8
24,9
25,4
-
474766
1096562
14
BB
108530
109527
-
8
24,9
25,4
-
463634
1096562
14
RB
108548
109545
-
8
24,9
25,4
-
474775
1096562
15
59
61
-
4100056 1096609
15
59
61
-
4200028 1096609
15
59
61
-
4100065 1096609
15
59
61
-
4200037 1096609
15
68
70
-
464571
1096609
15
68
70
-
475792
1096609
15
68
70
-
4104640 1096609
15
68
70
-
6000000 1096609
16
BB
199977
203041
-
16
RB
200010
203087
-
16
BB
108610
109607
-
16
RB
108628
109625
-
18
BB
200101
203130
-
18
RB
200153
203176
-
18
BB
108646
109643
-
18
RB
108664
109661
-
16-19 16-19 16-19 16 19 16 19 19 22 22 26
K
K
* May be furnished in other wire rope sizes. † Ultimate Load is 4 times the Working Load Limit. 3” and ** Available in Bronze Bushed only 76 and 4-1/2” 114mmhave haveself selflubrifacating lubrifacatingBronze BronzeBushing. Bushing. † Fitted with 1-1/4” (32mm) ID Swivel Eye.
404 Tail Board Sheave Diameter (Inches)
NOTE: NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing and wire rope size. Tail board does not contain the spool that is required with the hook (418) and shackle (419) snatch blocks.
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
I (mm)
J (mm)
K (mm)
L (mm)
M (mm)
N (mm)
O (mm)
P (mm)
Q (mm)
R (mm)
3”
76
37
38
67
44
68
25
19
19
19
13
56
14
17
14
33
19
26
4,5”
108
48
54
108
56
90
48
24
25
25
19
99
24
24
19
49
29
39
6”
152
58
76
130
83
130
59
33
38
38
25
152
32
38
32
89
40
45
8”
203
58
102
156
83
130
59
33
38
38
25
152
32
38
32
89
41
45
10”
254
58
127
183
83
130
59
33
38
38
25
152
32
38
32
89
43
45
12”
305
58
152
229
83
130
59
33
38
38
25
152
32
38
32
89
43
45
14”
356
58
178
241
83
130
59
33
38
38
25
152
32
38
32
89
-
-
16”
406
78
203
292
90
149
75
38
44
64
32
130
44
40
38
80
-
-
18”
457
78
229
298
90
149
75
38
44
70
32
130
44
40
38
80
-
-
dimensions are for reference only, dimensions at any NOTE: All dimensions are for reference only, dimensions may change NOTE: at any all time without prior notice. Dimensions are roundedmay – nochange decimals. time without prior notice. Dimensions are rounded – no decimals. copyright © 2008 2011 Crosby Europe n.v. All rights reserved
3
McKissick® Snatch Blocks and Derrick Blocks 408L 409SNATCH SNATCHBLOCKS BLOCKS 408 &&409
SEE APPLICATION AND WARNING INFORMATION
on pages 358-365 of the General 2011 Catalogue Para Español: www.thecrosbygroup.com
Light Champion Double Sheave • Light Champion snatch block as a double sheave block. • Drop forged swivel hook or swivel shackle. • Can be furnished with bronze bushings or roller bearings. • Opening feature permits easy insertion of wire rope in both sheaves with removal of one bolt. • Can be furnished with hook latch. • Pressure lube fittings. • 4 ½” – 10” models furnished with dual rated wireline sheaves. • Fatigue rated. • All sizes are RFID EQUIPPED
408L 408 withwith Hook & Latch Hook
409 with Shackle
Sheave Diameter (Inches)
Bearing Code
† 4-1/2
BB
Stock No. Weight Each (kg.) Wire Rope Size Working Load 408L 408L 408with 409 408with 409 (mm) †† Limit (t)* Hook Latch with Shackle Hook Latch with Shackle with&Hook with&Hook 104025
105022
10-13
4
8,16
8,16
Rep. Sheave Stock No.
Rep. Latch Stock No.
2000232
1096468
6
BB
104105
105102
16-19
12
20,4
22,7
460815
1096609
6
RB
104123
105120
16-19
12
20,4
22,7
472688
1096609
8
BB
104187
105184
16-19
12
24,0
26,3
461164
1096609
8
RB
104203
105200
16-19
12
24,0
26,3
473277
1096609
10
BB
104267
105264
16-19
12
31,8
34,0
461805
1096609
10
RB
104285
105282
16-19
12
31,8
34,0
473776
1096609
12
BB
168046
195185
16
12
40,8
43,1
462270
1096609
12
RB
194580
195229
16
12
40,8
43,1
474141
1096609
12
BB
104347
105344
19
12
40,8
43,1
462289
1096609
12
RB
104365
105362
19
12
40,8
43,1
474150
1096609
14
BB
194623
195247
16
12
45,4
47,6
463625
1096609
14
RB
194651
195265
16
12
45,4
47,6
474766
1096609
14
BB
104427
105424
19
12
45,4
47,6
463634
1096609
14
RB
104445
105442
19
12
45,4
47,6
474775
1096609
* Ultimate Load is 4 times the Working Load Limit. † Available in Bronze Bushed only. †† May be furnished in other Wire Rope sizes.
NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing and wire rope size NOTE: all dimensions are for reference only, dimensions may change at any time without prior notice. Dimensions are rounded – no decimals.
4
2011 Crosby Europe n.v. All rights reserved copyright © 2008
McKissick® Snatch Blocks and Derrick Blocks Type 409 Type nos. nos. 408L, 408, 409
SEE APPLICATION AND WARNING INFORMATION
on pages 358-365 of the General 2011 Catalogue Para Español: www.thecrosbygroup.com
Sheave Diameter (Inches)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
I (mm)
J (mm)
K (mm)
Q (mm)
6”
152
109
76
130
114
147
67
37
38
38
25
53
8”
203
109
102
156
114
147
67
37
38
38
25
53
10”
254
109
127
183
114
147
67
37
38
38
25
53
12”
305
109
152
229
114
147
67
37
38
38
25
53
14”
356
109
178
272
114
146
67
37
38
38
25
53
Sheave Diameter (Inches)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
J (mm)
K (mm)
L (mm)
M (mm)
N (mm)
O (mm)
P (mm)
6”
152
109
76
130
114
38
25
170
44
40
38
80
No. 408
8”
203
109
102
156
114
38
25
170
44
40
38
80
10”
254
109
127
183
114
38
25
170
44
40
38
80
12”
305
109
152
229
114
38
25
170
44
40
38
80
14”
356
109
178
272
114
38
25
170
44
40
38
80
No. 409
NOTE: All dimensions are for reference only, dimensions may change at any time without prior notice. Dimensions are rounded – no decimals. NOTE: all dimensions are for reference only, dimensions may change at any time without prior notice. Dimensions are rounded – no decimals.
copyright © 2008 2011 Crosby Europe n.v. All rights reserved
5
McKissick® Snatch Blocks and Derrick Blocks 420L, 421&&406 406SNATCH SNATCHBLOCKS BLOCKS 420, 421
SEE APPLICATION AND WARNING INFORMATION
on pages 358-365 of the General 2011 Catalogue Para Español: www.thecrosbygroup.com
Champion • Hooks and sideplates are forged alloy steel and heat treated. • Shackles and yokes are forged and heat treated steel. • All parts are forged. • Sideplates are designed to eliminate possibility of rope jamming. • Can be furnished with bronze bushing or sealed roller bearings. • Opening feature permits insertion of rope while block is suspended from gin-pole. • Can be furnished with S-4320 hook latch. • Pressure lube fittings. • Hook and shackle assemblies can be interchanged.
Type nos. 420, 421, 406
• Blocks furnished with dual rated wireline sheaves. • Fatigue rated.
Champion Snatch blocks
• All sizes are RFID EQUIPPED.
420L 420 withwith HookHook & Latch
Stock No.
Weight Each (kg.) Wire Rope Size Working Load 420L with 421 with 406 (mm) † Limit (t)* 420 with Hook Hook & Latch Shackle Tail Board
Sheave Diameter (Inches)
Bearing Code
420L with 420 with Hook Hook & Latch
421 with Shackle
406 Tail Board
6
BB
169376
169481
167973
19-22
12
18,1
21,8
6
RB
169394
204120
167982
19-22
12
18,1
21,8
8
BB
169420
169515
167991
19-22
15
23,1
8
RB
169447
204193
168008
19-22
15
10
BB
110223
110720
103186
19-22
10
RB
110260
110757
103202
19-22
Rep. Sheave Stock No.
Rep. Latch Stock No.
10,9
460940
1096609
10,9
473035
1096609
25,9
13,6
461360
1096609
23,1
25,9
13,6
473534
1096609
15
28,6
31,3
19,1
462001
1096609
15
28,6
31,3
19,1
474025
1096609
* Ultimate Load is 4 times the Working Load Limit. † May be furnished in other Wire Rope size.
421 with Shackle
406 Tail Board
Sheave Diameter (Inches)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
I (mm)
J (mm)
K (mm)
L (mm)
M (mm)
N (mm)
O (mm)
P (mm)
Q (mm)
R (mm)
6”
168
108
84
149
90
147
67
37
38
53
32
170
44
40
38
80
48
59
8”
219
108
109
173
90
149
75
44
44
53
32
170
44
40
38
80
48
59
10”
273
108
137
198
90
149
75
44
44
56
32
170
44
40
38
80
54
59
14”
356
108
178
254
90
149
75
44
44
56
32
170
44
40
38
80
-
-
NOTE: all dimensions are for reference only, dimensions may change at any NOTE: All dimensions are for reference only, dimensions may change at anytime timewithout withoutprior priornotice. notice.Dimensions Dimensionsare arerounded rounded––no nodecimals. decimals. Tail board does not contain the spool that is required with the hook (420) and shackle (421) snatch blocks 6
2011 Crosby Europe n.v. All rights reserved copyright © 2008
McKissick® Snatch Blocks and Derrick Blocks 430L, 431 & 407 SNATCH BLOCKS
SEE APPLICATION AND WARNING INFORMATION
on pages 358-365 of the General 2011 Catalogue Para Español: www.thecrosbygroup.com
Super Champion • Drop forged, heat treated swivel hook or swivel shackle. • Hook and shackle assemblies on 8” through 14” size can be interchanged. • Can be furnished with bronze bushings or roller bearings.
• Can be furnished with hook latch.
• Pressure lube fittings.
• 8” and 10” models furnished with dual rated wireline sheaves.
• 8” through 14” 430 and 431 blocks have exclusive bolt retaining spring to assure no lost bolts.
• Fatigue Rated. • All sizes are RFID EQUIPPED.
Stock No. Weight Each (kg.) Sheave Wire Working Rep. Rep. Bearing 430L with with Diameter Rope Size Load 430L Sheave Latch 430 with 431 with 407 Tail 430 with Code Hook & Hook & 431 with 407 Tail (Inches) (mm) † Limit (t)* Stock No. Stock No. Hook Shackle Board Hook Shackle Board Latch Latch
430L 430 withwith HookHook & Latch
431 with Shackle
8
BB
120025
121022
103523
26-28
20
34,0
39,5
19,1
461440
1096657
8
BR
120043
121040
103541
26-28
20
34,0
39,5
19,1
473614
1096657
10
BB
120098
121095
103603
26-28
20
40,4
45,8
24,9
462083
1096657
10
BR
120114
121111
103621
26-28
20
40,4
45,8
24,9
474105
1096657
12
BB
208538
169917
184375
26
20
46,7
52,0
31,8
462680
1096657
12
BR
208556
209303
184393
26
20
46,7
52,0
31,8
474524
1096657
12
BB
120178
121175
103685
28
20
46,7
52,0
31,8
462699
1096657
12
BR
120196
121193
103701
28
20
46,7
52,0
31,8
474533
1096657
14
BB
208574
209321
184419
26
20
56,0
61,0
40,8
463457
1096657
14
BR
208592
170424
184437
26
20
56,0
61,0
40,8
475024
1096657
14
BB
120258
121255
103765
28
20
56,0
61,0
40,8
463466
1096657
14
BR
120276
121273
103783
28
20
56,0
61,0
40,8
475033
1096657
18
BB
208691
209410
184552
26
25
109,0
118,0
75,0
4100298 1090143
18
BR
208734
209465
184605
26
25
109,0
118,0
75,0
4200331 1090143
18
BB
119484
119561
119641
28
25
109,0
118,0
75,0
4103348 1090143
18
BR
119493
119570
119650
28
25
109,0
118,0
75,0
4200322 1090143
20
BB
208752
209483
184623
28
30
170,0
181,0
98,0
4103936 1090189
20
BR
208789
169864
184650
28
30
170,0
181,0
98,0
4200769 1090189
20
BB
119509
119589
119669
32
30
170,0
181,0
98,0
4103945 1090189
20
BR
119518
119598
119678
32
30
170,0
181,0
98,0
4200778 1090189
24
BB
208814
209526
184687
28
30
204,0
215,0
132,0
4104114 1090189
24
BR
208860
209553
184721
28
30
204,0
215,0
132,0
4200983 1090189
24
BB
119527
119605
119687
32
30
204,0
215,0
132,0
4104123 1090189
24
BR
119536
119614
119696
32
30
204,0
215,0
132,0
4200992 1090189
* Ultimate Load is 4 times the Working Load Limit. † May be furnished in other Wire Rope sizes.
407 Tail Board
Sheave Diameter (Inches)
NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing and wire rope size. Contact our Special Sales Department for blocks up to 350 tons or reference the special request form on page 461. Tail board does not contain the spool that is required with the hook (430) and shackle (431) snatch blocks.
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
H (mm)
I (mm)
J (mm)
K (mm)
L (mm)
M (mm)
N (mm)
O (mm)
P (mm)
Q (mm)
R (mm)
8”
90
102
181
125
159
86
38
51
57
38
191
70
45
51
93
54
64
10”
83
127
208
125
159
86
38
51
57
38
191
70
45
51
93
54
64
12”
83
152
229
125
159
86
38
51
57
38
191
70
45
51
93
56
64
14”
90
178
272
125
159
86
38
51
57
38
191
70
45
51
93
64
64
17”
98
216
318
176
208
109
49
64
86
44
248
80
44
51
124
-
-
18”
106
229
311
176
208
109
49
64
86
44
248
80
44
51
124
-
-
20”
128
254
387
260
273
175
57
76
105
57
344
100
71
64
179
-
-
24”
128
305
429
260
273
175
57
76
105
57
344
100
71
64
179
-
-
NOTE: all dimensions are for reference only, dimensions may change at any NOTE: All dimensions are for reference only, dimensions may change at any time without prior notice. Dimensions are rounded – no decimals. time without prior notice. Dimensions are rounded – no decimals. copyright © 2008 2011 Crosby Europe n.v. All rights reserved
7
McKissick® Snatch Blocks and Derrick Blocks
Your Total Block Company.
McKissick®790 Metric Crane Blocks
McKissick® RJ Block
McKissick® Roll Forged™ Sheaves
McKissick® UB-500 Overhaul Balls
McKissick® Snatch Blocks
Crosby Europe Crosby Products Distributed By:
Crosby Europe NV Industriepark BELGIUM Zone B n°26 2220 Heist-op-den Industriepark Zone Berg B n° 26 Belgium 2220 Heist-op-den-Berg T (+32) (0)15 75 71 25 FP (+32) (+32) (0)15 (0)1575 7537 7164 25 sales@crosbyeurope.com F (+32) (0)15 75 37 64 www.thecrosbygroup.com sales@crosbyeurope.com Crosby Europe (UK) Ltd Unit 10, Fall Bank Industrial Estate UNITED KINGDOM Dodworth, Barnsley Station Street South Yorkshire Cradley Heath S75 3LS - UK TWest +44Midlands (0)1226 290516 B64 6AJ FP (+44) +44 (0)1226 (0)1226240118 290 516 sales@crosbyeurope.co.uk F (+44) (0)1226 240 118 www.thecrosbygroup.com sales@crosbyeurope.co.uk
Stock# 99996464 646REV. REV. 09/2011 Stock# 9999 12/2008
Crosby Europe (France) S.A.R.L. BP 48365 FRANCE F21, - 95805 – Pontoise Cedex Rue duCergy Petit Albi France Parc d’Affaires Silic Parc Silic 95805d’Affaires Cergy - St. Christophe Bât. Cérès – Porte 304180 P (+33) (0)1 34 201 21, Rue du F (+33) (0)1Petit 34 Albi 201 188 95800 Cergy – St.Christophe sales@crosbyeurope.fr T (+33) (0)1 34 201180 F (+33) (0)1 34 201188 sales@crosbyeurope.fr www.thecrosbygroup.com
www.thecrosbygroup.com www.thecrosbygroup.com