Innovative Doors & Sun Protection Systems garage DOOR
GD LAP40 steel TRACKLESS SECTIONAL DOOR
BY SILVELOX
ABOUT US
MOVE TO SPACE
twinDOOR, a member of the family-run Döring Group, brings over 60 years of experience in manufacturing high quality products. twinDOOR products comply to CE norms and safety standards. Professional staff, leading technology and innovative solutions make twinDOOR the forerunner in the international market. More than two million customers worldwide place their trust in the products manufactured by the Döring family group.
2
Watch twinDOOR MOVIE!
BY SILVELOX
GD LAP40 is an innovative sectional door thanks to its original opening system that doesn’t require ceiling tracks and reduces by 50% the internal protrusion. With GD LAP40 the space inside the garage is best used and the door clearance is optimized, both in height and in width. Just a 200 mm headroom is required. GD LAP40 is equipped with the SilMotion operator embedded in the head-bar. This system operates the doors without visible ceiling tracks. The door raises, folds in half, turns below the ceiling, split in two sections and the lower one slides below the upper one.
3
BY SILVELOX
MOTORISATION
The GD LAP40 sectional door is equipped with the SilMotion operator, which works for all garage door sizes available in the catalog. SilMotion, projected and developed by Silvelox, is outright innovative thanks to the electronic management and the double magnetic clutch transmission system that reduce consumption and enhance safety standard. SilMotion is completely integrated in the headbar, therefore the internal side results clean and it does not reduce the door clearance. Moreover, SilMotion can be connected to alarm system and home automation and it’s possible to diagnose the mechanics through a Bluetooth application, too. In case of power failure or of a malfunction, the operator can be automatically disengaged and it is possible to operate the door manually. GD LAP40 ensure the highest safety standards due to SilMotion and other two unique systems: SilRoll and SilHook. For automatic door operation, a four channel remote control is available. The LED courtesy light is integrated in the electronic card embedded in the head-bar.
The double roller system allows inward panel displacement, for an improved safety.
4
The locking system with SilHook hooks allow to increase security and is independent from the operator.
5
1
2
CEILING TRACKS
TRACKLESS
The vertical sliding movement implies that the door, when open, lies parallel to the ceiling supported by the tracks that remain always in sight, fixed to the ceiling, even when the door is closed.
This is the main feature that makes GD LAP40 unique. Thanks to its supporting frame and its two overlapping sections, unpleasant ceiling tracks are not necessary.
VISIBLE OPERATOR
The operator is anchored to the ceiling with an increment of required space.
3
4
GD LAP40 SECTIONAL DOOR
INVISIBLE OPERATOR
COUNTERBALANCE SYSTEM
The door is balanced by a spring system. It requires periodical inspections and replacements.
The two sections are balanced by means of a counterweight system. Parts subject to wear are minimized.
INTERNAL SIDE
WHY CHOOSE GD LAP40
2
The operator is completely hidden inside the headbar; it does not require sliding bars and it does not need additional space.
SPRING SYSTEM
The multiple horizontal sections architecture involves the use of visible hinges and hardware.
6
TRADITIONAL SECTIONAL DOOR
1
INTERNAL SIDE
3
4
Due to the unique architecture, the internal side results clean with no hardware.
7
MODELS AIR
SOUND
Assembled plain panels for a refined and minimal effect
The various lines on the same panel values the design of this door
SURFACES
SURFACES
woodgrain
slightgrain
woodstyle
slightgrain
LINE
WAVE
A simple and linear design conveys elegance and rigor, for all kinds of architectural contexts
Distinctive panel production creates a door which stands out for its strong personality
SURFACES
woodstyle
SURFACES
woodgrain
slightgrain
woodstyle
smooth
WIDE
BOX
Thick lines emphasize the door design and give it a determined character
The timeless elegance of paneled squares makes an appropriate door even for the more traditional contexts
SURFACES
SURFACES
woodgrain
8
woodgrain
slightgrain
woodstyle
slightgrain
woodstyle
9
COLOURS GD LAP40 is made by 40 mm thick PU insulated sandwich panels with metal coat, available in a wide combination of colors and surfacing. It’s possible to choose the 12 RAL standard colors, RAL colors on your own choice or realize the wood-like in the 4 standard wood colors.
GRIDS AND WINDOWS
SMOOTH - SLIGHTGRAIN - WOODGRAIN
9016 - Traffic White
7035 - Light Gray
9002 - Grey White
7040 - Window Grey
9006 - White Aluminium
5003 - Saphire Blue
6005 - Moss Green
3003 - Ruby Red
6009 - Fir Green
7016 - Anthracite Grey
8016 - Mahogany Brown
8019 - Grey Brown
GD LAP40 is also available with a wide range of glazing options that allow you to illuminate the garage’s interior with natural light and to lighten the visual impact of the door. The GD LAP40 windows are made of polycarbonate, lightweight and durable material available with bronze embossed finish and, on request, clear embossed or smooth transparent finishes. If the garage needs ventilation it’s possible to apply ventilation grids to GD LAP40.
GD LAP40 door, W 3270 x H 2580 with 3 windows and 5 rectangular ventilation grids.
GD LAP40 door, W 3270 x H 2580 with 3 rectangular ventilation grids in the upper panel and 5 rectangular ventilation grids in the lower one.
HANDLES
WOODSTYLE
Light
Medium
Medium-dark
Dark
Upon customer request is possible to apply to GD LAP40 a double handle (standard finish Platinbronze), which permits external manual operating from outside .The double handle is mandatory in the case of a garage with no other access or for a manual door. To permit an optimal aesthetic integration, the handles are available in the following finishes: Platinbronze and Platinsilver.
Platinbronze
Platinsilver
SURFACES
woodgrain An embossed surface that reflects the texture of wood grain, a classic and eternal finish.
10
slightgrain A smooth surface with a little texture that gives to the color a modern style.
smooth A smooth and bright surface that intensify color and door style.
woodstyle A smooth surface which reflects the color and grain of timber.
11
TECH SPECS
DOOR CLEARANCE measures in mm
INSTALLATION TYPE
BETWEEN WALL INSTALLATION
backroom 1245 mm
wall opening W 2800mm
door opening W 2500mm
outer frame H 2130mm door opening H 1930mm
inner frame W 2550mm
wall opening H 2150mm
outer frame W 2770mm
finished floor level
finished floor level
Finished floor level
INSTALLATION TYPE
BEHIND WALL INSTALLATION
12
200
W 2800 mm W 2770 mm W 2550 mm W 2550 mm W 2500 mm
outer frame H 2130 mm door opening H 1930 mm wall opening H 1930 mm
inner wall outer frame wall opening inner frame door opening
backroom 1245 mm
finished floor level
esterno Over all telaio frame
luce Door passaggio opening
A
B
C
D
E
F
G
1000
1200
1400
1600
1800
2000
2200
2130
1930
127
158
277
445
674
/
/
R 1245
2180
1980
126
154
272
435
653
/
/
1295
2230
2030
125
151
268
426
632
/
/
1345
2280
2080
123
147
263
416
610
/
/
1395
2330
2130
122
143
258
406
589
827
/
1445
2380
2180
121
142
254
396
576
741
/
1495
2430
2230
120
141
251
387
562
706
/
1545
2480
2280
118
139
247
377
549
670
/
1595
2530
2330
117
138
243
367
535
635
896
1645
2580
2380
131
148
170
278
412
603
847
1464
2630
2430
130
147
168
272
405
590
820
1515
2680
2480
129
146
166
267
399
577
793
1565
2730
2530
128
144
165
262
394
564
766
1614
2780
2580
127
143
163
257
388
551
739
1664
2830
2630
127
142
162
253
383
539
726
1714
2880
2680
126
141
160
249
377
527
714
1764
2930
2730
126
140
159
245
372
514
701
1814
2980
2780
125
139
157
241
366
502
688
1864
13
3320 3370 3420 3470 3520 3570 3620 3670 3720 3770 3820 3870 3920 3970 4020 4070 4120 4170 4220 4270 4320 4370 4420 4470 4520 4570 4620 4670 4720 4770 4820 4870 4920 4970 5020 5070 5120 5170 5220 5270
DOOR OPENING HEIGHT
Door sizes: outer frame (mm) 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 2400 2450 2500 2550 2600 2650 2700 2750 2800 2850 2900 2950 3000
2020 2070 2120 2170 2220 2270 2320 2370 2420 2470 2520 2570 2620 2670 2720 2770 2820 2870 2920 2970 3020 3070 3120 3170 3220 3270
2730 TABLE 2930 SIZE
2780 2980 2730 2930 2680 2880 2630 2830 2580 2780 2530 2730 2480 2680 2430 2630 2780 2980 2380 2580 2730 2930 2330 2530 2680 2880 2280 2480 2630 2830 2230 2430 2580 2780 2180 2380 2530 2730 2130 2330 2480 2680 2080 2280 2430 2630 2030 2230 2380 2580 1980 2180 2330 2530 1930 2130 2280 2480 2230 2430 2180 2380 2130 2330 2080 2280 2030 in mm 2230 Measures 1980 2180 1930 2130
14
Measures in mm
1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 2400 2450 2500 2550 2600 2650 2700 2750 2800 2850 2900 2950 3000
2020 2070 2120 2170 2220 2270 2320 2370 2420 2470 2520 2570 2620 2670 2720 2770 2820 2870 2920 2970 3020 3070 3120 3170 3220 3270
OVER-ALL FRAME HEIGHT (ordering OVER-ALLsize) FRAME HEIGHT (ordering size)
2680 2880 2630 2830 2580 2780 2530 2730 2480 2680 2430 2630 2780 2980 2380 2580 2730 2930 2330 2530 2680 2880 2280 2480 2630 2830 2230 2430 2580 2780 2180 2380 2530 2730 2130 2330 2480 2680 2080 2280 2430 2630 2030 2230 2380 2580 1980 2180 2330 2530 1930 2130 2280 2480 2230 2430 2180 2380 2130 2330 2080 2280 2030 in mm 2230 Measures 1980 2180 1930 2130
3320 3370 3420 3470 3520 3570 3620 3670 3720 3770 3820 3870 3920 3970 4020 4070 4120 4170 4220 4270 4320 4370 4420 4470 4520 4570 4620 4670 4720 4770 4820 4870 4920 4970 5020 5070 5120 5170 5220 5270
DOOR OPENING HEIGHT
2780
3050 3100 3150 3200 3250 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 3850 3900 3950 4000 4050 4100 4150 4200 4250 4300 4350 4400 4450 4500 4550 4600 4650 4700 4750 4800 4850 4900 4950 5000
GD LAP40 is always custom made, both in width and height in steps of 50 mm. The aesthetics are adapted proportionally to size variation, keeping the overall effect appealing and harmonious.
OVER-ALL FRAME HEIGHT (ordering OVER-ALLsize) FRAME HEIGHT (ordering size)
CUSTOM SIZE DOOR OPENING HEIGHT
+ SIZE
3050 3100 3150 3200 3250 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 3850 3900 3950 4000 4050 4100 4150 4200 4250 4300 4350 4400 4450 4500 4550 4600 4650 4700 4750 4800 4850 4900 4950 5000
DOOR OPENING HEIGHT
TECH SPECS 2980
SIZE TABLE
Measures in mm
C
sector
B
sector
B sector A
OVER-ALL FRAME WIDTH (ordering size)
sector
DOOR OPENING WIDTH
A
OVER-ALL FRAME WIDTH (ordering size) DOOR OPENING WIDTH
sector sector sector
D F H
sector sector sector
sector D sector F sector H
E
sector sector
C
E
G
OVER-ALL FRAME WIDTH (ordering size) DOOR OPENING WIDTH
DOOR OPENING WIDTH
sector
I
sector
sector
G
I
OVER-ALL FRAME WIDTH (ordering size) 15 7
WARRANTY UP TO 2 YEARS
The applicable limited warranty periods are from the installation date by the original owner as follows: • material and workmanship: 2 years; • garage door opener: 2 years. (* electronic control unit: 2 years.)
STANDARD
SPECIFICATIONS
• Frame made by 2 mm thick metal sheet, RAL 9016 alike.
• GD LAP40 with door opening in 2 overlaping sections.
• Leaf made by sandwich panels in double sheet with polyurethane foam, 40 mm thickness, horizontal oriented and mechanically joined.
• Thermal transmittance U=1,531 W/m²K (value obtained for a door without windows and grids with behind wall installation).
• Internal panel side finished in embossed stucco RAL 9010 alike.
• Excellent performance in terms of acoustics insulation and water/wind proofing.
• External panel finished in woodgrain, slightgrain, smooth or woodstyle varnished or PVC plasticized.
• SilMotion operator completely integrated in the head-bar, standard equipment (double handles option is to be applied in the case of a garage with no other access). Receiver and remote control are available as accessories option upon request.
• Bottom and perimeter sealing in EPDM rubber antientrapment, water and wind proof. • Counterweight system.
16
twinDOOR in order to improve its doors quality, reserves the right to apply changes at its products at any time, to improve customers satisfaction. The images in this brochure are for the purposes of representing the product and are purely indicative and not binding.
17
Financial Head Quarter twinDOOR GmbH Zeppelinstrasse 73, D-81669, Munich, Germany Tel:+49 89 4583 5588 Fax:+49 89 9218 5268 www.twinDOOR.eu R&D Center twinDOOR Engineering GmbH Industriestrasse 1a, CH-9462, Montlingen, Switzerland Tel:+41 71 763 6373 Fax:+41 44 355 3088 www.twinDOOR.eu Asia Sales & Service Center twinDOOR Suzhou Co., Ltd. No.145, SongShan Road, Suzhou New District, China Tel. +86 512 6813 0916 Fax +86 512 6813 0917 www.twinDOOR.com.cn info@twindoor.eu Middle East Sales & Service Center twinBAU Technical Service L.L.C P.O.Box 48709 Dubai, UAE Tel:+971 4 3415 898 Fax:+971 4 3415 899 www.twinbau.com sales.uae@twindoor.eu
14072303
Innovative Doors & Sun Protection Systems