Table of Contents THE LEGEND FITNESS ADVANTAGE . .
. . . . . . . . . . . . . . . . . .
Racks, Cages & Platforms Pro Series Cages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Performance Series Cages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specialty Rack & Cages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4-10 11-17 18-19 20
Free Weight Equipment Utility Benches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22 Olympic Benches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-25 Upper & Lower Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Body Weight Equipment Upper Body, Lower Body & Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28 Glute/Ham Developers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Plate-Loaded Equipment Upper Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lower Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LeverEDGE Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Westside Barbell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30 31 32-33 34-36
Speed & Strength Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Storage Solutions Dumbbells & Kettlebells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Barbells & Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Pin Select Equipment Upper Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lower Body & Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Combo Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multi Stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40-41 42-43 44-45 46-47
Standard Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
2
A dvantage
TheLEGENDFITNESSAdvantage Designed, Tested and Manufactured In America: Every Legend Fitness-branded item is manufactured in East
Tennessee by hard-working Americans, unlike some of our competitors, who claim their equipment is βbuilt in the USAβ, but only after the components came off a boat from China. We are keeping jobs, and money, here at home and proud of it.
Outstanding Customer Service: Despite being a world leader in strength manufacturing, we are still small town folks
that will bend over backward to assist you. A customer is a lifelong friend. Same Day Parts Shipping: On most stocked items, we will get parts shipped to you within 24 hours of notification via
phone or e-mail. Plus, those parts are being shipped from East Tennessee, not Taiwan. No Call Screening: If you have questions, give us a call. More often than not, youβll find an actual human being with an
answer. We thrive on customer feedback to build relationships and improve our product. 3D CAD Developed to Minimize the Use of Bolts & Fasteners: Bolts can come loose, so the only reason we
ever put them on a frame is if it helps you get the equipment through a standard-sized door. As a result, our frames are the most rigid and maintenance-free in the business. Weight Room Design: Speak with one of our experienced sales staff for strength solutions customized to your facility, or
visit our website and use the βDesign Your Own Weight Roomβ feature on the home page. More Choices: Currently, we carry approximately 200 individual products
and accessories. We are your βone stop shopβ for completely outfitting a strength training facility. Customization: We only build to order and as such we are better
equipped to accommodate custom modifications to our standard catalog items. See something in our lineup that you would like to tweak a little bit to meet your needs? Give us a call. Weβre willing to work with you to make you happy. Color Choice and Personalization: We
have 16 standard frame colors and, at current count, about 85 standard upholstery colors. But if thereβs another color you want, let us know. We can usually make it happen for a nominal fee. Team logos can also be reproduced on the frames, platforms and pads of most pieces of equipment. Our close association with luminaries such as Louie Simmons (Westside Barbell), Dr. Michael Yessis, Chip Smith/Robby Stewart (CES), Anthony DiLuglio (Art of Strength), D1 Sports, Cal Deitz (XL Athlete) and others allows us to get expert feedback during development and gives us the distinction of winning favor with some of the most respected names in the industry. The Choice of Legends:
Legend 3
Pro Series C Pro Se PRO SERIES CAGE ANATOMY Assistance Band Pegs
Multi-Grip Pull-Up Bar
Resistance Band/Chain Storage
Swivel Grip Pull-Up Handles
Fully Welded Uprights
Chrome-Plated, Angled, Numbered, Plate Storage
7 Gauge, Chrome-Plated, Offset Racking With Laser-Cut Numbers
Monster Hooks Independent Dip Attachments Olympic Bar/Accessory Storage
Pro Series Self-Adjusting Bench Dual Landmine Attachment
Technique Tray Attachment Resistance Band Pegs
white = standard feature orange = optional equipment
Bench Docking System
STANDARD FEatuRES Overbuilt for Strength 11 gauge 3x3-inch tubing with offset 7 gauge, chrome-plated racking with laser-cut numbering. The Ultimate in Rigidity Like most Legend Fitness items, the Pro Series Cages have been developed with 3D CAD software to use as few fasteners as possible. Each side of these cages is a single welded piece, reducing the possible points of weakness while reducing maintenance needs. Monster Hooks Oversized, dual peg, fully welded J-hooks with a carry handle, number window and extremely durable yet replaceable polymer contact surfaces. Extended reach profile of hook increases safety without getting in the way. No metalto-metal contact with barbells protects the bar knurling, means less rust and chipped paint, and more energy absorption for dropped bars. This is the part of the cage that you interact with most and we feel it will be the best youβve ever encountered. 4
Your Friend When In Need The safety arms were overbuilt for when something slips, featuring not only a 3x2-inch cross section and ABS wearguards, but an internal, full length 1-inch racking rod. Lots oβ Storage β’ 12 chrome-plated, frame-welded, numbered, Olympic-size plate storage pegs that are slightly angled for safety. β’ 2 angled storage pegs for resistance bands/chains. β’ Upright bar storage for up to 4 Olympic bars that is safer than hanging designs β can also hold the optional dip attachments, optional technique trays and bench docking system rods. Extra Versatility β’ Lower pegs for band resistance exercises β’ Upper pegs for band assistance exercises (except half cages) β’ Wide grip and neutral grip pull-up bars β’ Attachment points for 3252 Swivel Grip Handles β’ Bench docking system (compatible only with Pro Series bench)
Cages eries Cages hook comparison
If you think about it, the most important part of a cage is the J-hooks. This is the point of contact for weight loads and it is the most frequent point of interaction between user and cage. Anybody can build a strong frame, but the hooks need to be adjustable, strong and easy to use. Well, Legend has just re-written the books on hooks, and what you see here is the result. A super strong, abuse-loving, interchangeable slab of polymer is sandwiched between two plates of steel to force the industry to re-think how hooks should be made. Standard on all Legend Pro Series cages.
THE COMPETITION β’ Wear Surfaces Composed of Powder-Coated Steel & ABS Plastic β’ No Energy-Absorbing Properties β’ Small Wear Surface at Top of Sleeve β’ Shorter Hook Profile
LEGEND FITNESS β’ Manufactured Using Space Age Polymer β’ Energy-Absorbing Properties Help Prevent βBounce Outβ β’ Extended Wear Surfaces Protect Entire Face of Sleeve & Bottom of Hook β’ Longer Hook Profile β’ Dampens Noise
β’ Metal-On-Metal Contact β’ Wear Surface Not Replaceable
β’ Wear Surfaces Easily Replaceable
β’ Prone to Flaking & Rust
β’ Largest Oversized Hook Available
β’ One Color
β’ Custom Colors β’ Wonβt Flake or Tarnish
After looking at several companies, it became obvious that Legend Fitness was a leader in the market. They were able to provide the exact equipment we needed to fit our space and our budget. Working with Legend enabled us to come up with the best possible solution for our students and athletes. We now have a facility that is dedicated to those looking for significant gains in the overall and sport-specific strength. By considering all aspects, Legend has created a facility that is appealing to our male and female users, and a showpiece for all of our visitors.β β David βGeordieβ Brown, Assistant Athletic Director, College of Wooster βI just wanted to let you all know that the weight equipment arrived Friday morning, and everything looks fantastic. I would like to Thank all of you for being a part of this process. The people at Legend Fitness were outstanding, from their customer support to their promptness with the order. I know I had a lot of questions, and they were easy to get in touch with and extremely caring through the process. I can already tell, with the two workouts our football team has had with the new equipment, there is a new level of excitement from our student athletes, as well as an entirely new level of efficiency while in the weight room!β β Brad Winterland, Physical Education/Head Football Coach,Ashton - Franklin Center High School
Legend 5
Pro Series C Pro Se PRO SERIES CAGES
3226 Pro Series Half Cage
The not-so-little brother to the 3221 Power Cage, the Pro Series Half Cage doesnβt cut back on anything but floor space. The chosen cage of D1 Sports Training, Competitive Edge Sports and Athletic Republic, the Legend Fitness Pro Series Half Cage features only 12 frame bolts but dozens of features and accessories. Monster Hooks with advanced polymer contact surfaces, 7 gauge chrome racking, and made-in-East-Tennessee quality is standard with every cage, as well as a multi-grip chin up bar, resistance band pegs, Olympic bar storage, and 3β x 2β adjustable bar catches. Also available in a taller version, product number 3226-9, the cage dimensions of which are 58β x 68.5β x 116β. Shipping weight is 834 lbs. Weights and bars sold separately. The Swivel Grip Handles and Single LandMine are optional extras. Shipping Weight: 734 lbs. Measurements (LxWxH): 58β X 68β X 104β
3221 pro Series POWER cage This imposing piece of equipment towers over the weight room. It is, quite simply, the strongest and most versatile cage on the market. Period. Designed and made in Knoxville, Tennessee to shoulder the load for the most discerning athletes the world over, the Legend Pro Series Power Cage is world class. Built from hulking 3x3-inch, 11 gauge tubing and featuring the most interior space of any cage, with an indestructible 7 gauge chrome racking system and finished off with durable yet replaceable UMHW wear guards, the 3221 was designed to survive all the abuse that any powerlifter, football team or rocket launcher could throw at it. Also available in a taller version, dimensions are 80β x 68β x 116β and its shipping weight is 1080 lbs. Its model number is 3221-9. Weights, bands and bars sold separately. The Swivel Grip Handles, Pro Series Bench, Dip Attachments and Dual LandMine are optional extras. Shipping Weight: 980 lbs. Measurements (LxWxH): 80β X 68.5β X 104β
6
Cages eries Cages PRO SERIES CAGES
3215 Pro Series Power Station
Originally designed to fulfill a design requirement for Ohio State University, the Pro Series Power Station was designed in the βmulti rackβ style of racks to provide unlimited overhead room for standing military presses, push presses, etc., while still providing all the safety of a full cage. Like the rest of the Pro Series lineup, the 3215 is overbuilt with 11 gauge 3β x 3β tubing with 7 gauge chrome plated racking, so thereβs no doubt that these are lifting devices of the βheavy dutyβ variety. Much like your sisterβs convertible, extra buttresses down low restore the structural integrity lost when the top was chopped off. Pro Series Bench and Swivel Grip Handles are optional extras. Shipping Weight: 960 lbs. Measurements (LxWxH): 91.5β X 68.5β X 99.5β
3227 pro series Double-sided Half cage The ideal in powerful strength development while maximizing floor space, the 3227 Double-Sided Half Cage has all the regular features of the class-leading 3226 Pro Series Half Cage, but this time there are two of them back to back, allowing you to quickly process your athletes through the most demanding of strength training exercises. NOTE: Neither version of this cage, when disassembled, will fit through a single door. Double doors are required for installation. Also available in a taller version, the 3227-9, the dimensions of which are 110β x 68β x 116β. Its shipping weight is 1352 lbs. Weights and bars sold separately. Pro Series Benches are optional extras. Shipping Weight: 1152 lbs. Measurements (LxWxH): 110β X 68.5β X 104β
Legend 7
Pro Series C Pro Se PRO SERIES CAGES
3264 Pro Series MODULAR HALF CAGE
Even though Legend Pro Series cages have been CAD developed to use as few fasteners as possible to provide the ultimate in structural rigidity, there are those that still desire a system that takes things a step further. Pro Series Modular Cages feature everything that you may already be familiar with in the Pro Series cages, but eliminates the rear lower crossmember for a very open walk-through design, uses low profile flat steel instead of steel tubing as the βfeetβ of the cage, and then adds the ability for the cages to be linked together using 72-inch rear connectors and 96-inch side connectors β each with multi-grip pull-up stations. When two or more of these cages are bolted together using this system, the rigidity is multiplied, creating an extremely stable βjungleβ of cages and pull-up stations. The more racks that are added to the βjungleβ, the more rigid the whole assembly becomes. Weights and bars sold separately. Swivel Grip Handles, Pro Series Bench, Dual Landmine, Dip Attachments, Modular Crossmembers and Squat Seat are optional extras. Shipping Weight: 645 lbs. Measurements (LxWxH): 58β X 68.5β X 104β
3263 Pro series Modular POWER cage Originally developed to meet the specific demands of Coach Chip Pugh of TTU, the 3263 Pro Series Modular Cage features everything that you may already be familiar with in the 3221 Pro Series Power Cage, but adds the ability for the cages to be linked together using 72-inch rear connectors and 96-inch side connectors β each with multi-grip pull-up stations. When two or more of these cages are bolted together using this system, the rigidity is multiplied, thus benefitting from shared rigidity. The feet of the cage are a solid piece of 3/4-inch steel plate, eliminating any structural joints low on the cage and allows for each side of the cage to be one fully welded unit. In the end, you have the most rigid system to be found anywhere, resulting in rows of cages that wonβt just be there to catch heavy loads, but likely wonβt even shimmy while doing so. Weights, bands and bars sold separately. The Swivel Grip Handles, Pro Series Benches, Dip Attachments, Technique Trays, Modular Crossmembers and Dual LandMines are optional extras. Shipping Weight: 1100 lbs. Measurements (LxWxH): 75β X 68.5β X 104β
8
Cages eries Cages PRO SERIES CAGES
3268 FUSION series pro Modular Half cage w/llr
Our top-of-the-line half cage βfusedβ together with an integrated lat pulldown/ low row that has a 300 lb weight stack in 10 lb increments, interchangeable foot plates/thigh pads, a vee grip row handle, a wide grip lat bar, a storage hanger for the foot plates/thigh pads, and a feature that is unique to the industry β all lat exercises take place within the cage itself. An expanded need for facility versatility within the same restricted floorplan is an ideal situation for a Fusion cage, where several exercises and modalities can be executed within a very small footprint. NOTE: Must be used with 3222 Pro Series Bench and Bench Docking System to keep bench in place during back exercises. Plates and bars sold separately. Pro Series Bench, Dual Landmine, Dip Attachment and Swivel Grip Handles are optional extras. Shipping Weight: 1060 lbs. Measurements (LxWxH): 71β X 68.5β X 104β
3321 Pro series triple POWER cage A heavier-duty version of our 3209 Triple Power Cage. The βtripleβ part of the name comes from the fact that it provides the user with three different exercise zones. Itβs three Three THREE cages in one! On one side, thereβs a half cage. On the other, thereβs a full power cage with outside hooks and safety arms comprising the second and third exercise zones. So, our Triple Power Cage represents an incredible value for your cage dollar, complete with all the fine qualities normally associated with our Pro Series line, like offset, chrome-plated racking fashioned from extra-thick 7 gauge steel. Shipping Weight: 1150 lbs. Measurements (LxWxH): 106β X 68.5β X 104β
Legend 9
Pro Series C Pe PRO SERIES CAGE options Two-Tone Powder Coat
Bring a little extra class to your training room by choosing a contrasting color for cage crossmembers and attachments. Choose from any of our 16 standard powder coat finishes. For Pro Series cages, this is a NO COST OPTION! Product Number: 2-Tone
Bench Docking System
A patent-protected design that keeps our 3222 Pro Series Bench simply and securely located. Quicker bench placement + increased safety + NO COST OPTION = no brainer. Product Number: 3222-D
Swivel Grip Pull-Up Handles
If youβre the hardy sort that finds regular pull-ups and chin-ups too easy, then boost the difficulty and the number of stabilizing muscle groups with these. Each handle rotates in three dimensions to provide a less focused, but more challenging, upper body workout. Product Number: 3252
Cage Connectors
Experience the phenomenon of βshared rigidityβ by linking your Modular or Pro Series cages together with 3x3-inch, fully welded tubing with wide grip and neutral grip pullup bars and attachment points for 3252 Swivel Grip Handles. Deep flange plates for four bolts on each side ensure a solid connection. 3263-72C 72-Inch Front-to-Back Connector for Modular Cages 3263-96C 96-Inch Side-to-Side Connector for Modular Cages 3221-72C 72-Inch Front-to-Back Connector for non-Modular Cages 3221-96C 96-Inch Side-to-Side Connector for non-Modular Cages
Technique Trays
Acting as a barbell pedestal, Technique Trays bring your heavy work outside the cage and onto the platform. Use them as an additional safety device or just save your back on those dead lifts! 3221-T Technique Trays for Power Cages 3226-T Technique Trays for Half Cages
Landmines
Secure an Olympic bar in the sleeve(s), slip a weight onto the other end, and do a variety of exercises like shoulder presses, rows, cleans and laterals. Seamlessly move from one exercise to another. Put a barbell in each hand with the Dual Landmine, or hand one of the bars to a partner and you can do mirroring exercises to work on athletic independence and reaction times. 3233 Single Landmine 3235 Dual Landmine
Inverted Monster Hooks
Donβt let the name confuse you. The entire hook isnβt upside down. This is a hook that can be used on the outside front of the cage, giving your Pro Series cage another workout zone. Product Number: 3247
Inverted Safety Arms
Safety arms for the outside front of the cage, used in conjunction with the Inverted Monster Hooks above. Product Number: 3246
Step Attachment
A fully welded diamond plate platform for the outside front of the cage for step-up exercises. 3249 Power Cage Step Attachment 3250 Half Cage Step Attachment
Independent Dip Attachments
Independent, fully welded dip attachments that can be conveniently stored in the standard bar storage found on all Pro Series cages. 3251 Power Cage Dip Attachment 3255 Half Cage Dip Attachment
10
Cages erformance Performance SERIES CAGE ANATOMY Assistance Band Pegs
βFat Barβ Pull-Up Bar (Pro Style Top Crossmember optional)
Fully Welded Uprights
Chrome-Plated, Angled, Numbered, Plate Storage
Beefy J-Hooks
Beefy Spotter Arms
Resistance Band Pegs
3103 Three-Way Bench
white = standard feature orange = optional equipment
STANDARD FEatuRES Overbuilt for Strength 11 gauge 3x3-inch tubing throughout the entire frame provides more strength in the same way that a soda can is more difficult to bend than a drinking straw. The Ultimate in Rigidity Like most Legend Fitness items, the Pro Series Cages have been developed with 3D CAD software to use as few fasteners as possible. Each side of these cages is a single welded piece, reducing the possible points of weakness while reducing maintenance needs.
Quickly Adjustable Laser-cut numbering and 2-inch hole spacing accommodates different users of different statures and abilities quickly. Lots oβ Storage 12 chrome-plated, frame-welded, numbered, Olympic-size plate storage pegs that are angled upward two degrees for a little bit of extra safety. Safety Unparalleled
Bolt-down tabs are found on all corners for that extra measure of safety and stability.
Beefy J-Hooks Five pieces of thick steel and a solid 1-inch rod are welded together to make our Beefy J-Hook, the standard bar holder in the Legend lineup that could easily be considered an upgrade item elsewhere.
Legend 11
Performanc Perform Performance SERIES CAGES 3121 Power RAck
When it comes to power rack essentials, the Legend Fitness 3121 is definitely the Essentials, but with a burly, powder coated capital E. There are only four posts so the 3121 is an excellent choice for those with limited budgets and space, but there is enough room inside to do what you need to do. Speaking of those posts, they are hewn from 3x3 inch, 11 gauge steel and feature 2-inch hole spacing with laser-cut numbering. The standard top crossmember is a pull-up bar with a round cross section, and the standard J-hooks are welded from multiple pieces to be the strongest in the industry. All that, plus a long list of available upgrades means that the the Legend Power Rack is a cage that can grow with you. Shipping Weight: 372 lbs. Measurements (LxWxH): 48β X 48β X 88β
3133 Power Cage The foundation of our Performance Series line of American-made cages, the Power Cage has the most accessories and options of any cage in the Legend lineup. 42 inches of room is inside the massive uprights, 12 welded chrome pegs stand out in the rear for weight storage, the welded J-hooks are the strongest in the industry, a chin bar is included, and it has a strong, wide base that is five feet from front to rear. And when used with a Three-Way Utility Bench, every major lift can be accomplished in one location. Also available with a 3-inch thick oak and rubber insert platform as product number 3199. Bars and plates sold separately. Bench, Beefy Spotter Arms and band pegs are optional extras. Shipping Weight: 475 lbs. Measurements (LxWxH): 59.5β X 68β X 88β
3142 half cage The premier half cage. This is our top-selling cage among high schools and those with floorspace and/or budget concerns. The Legend Fitness Half Cage features an open design wide enough and deep enough to accomplish all of your goals, yet its footprint is small enough to allow you to keep more space in your weight room. A 3β x 3β frame with only 8 frame bolts (compared with the competitionβs 20 or more) means that this is the most rigid half cage youβll look at today. Or any day. Lifting area is 54 inches deep. Spotter arms reach 24 inches from the front of the uprights and are an extra beefy 3β x 2β in cross section on a solid 1-inch racking rod. Each upright is a single, fully welded piece for ease of assembly and unparalleled rigidity. Also available with a 3-inch thick oak and rubber insert platform as product 3202. Bars and plates sold separately. Shipping Weight: 350 lbs. Measurements (LxWxH): 56β X 68β X 88β
12
ce Series Ca mance Series Performance SERIES CAGES 3142-FT functional trainer Fusion Half cage
Of all the cages in this catalog, this one is a strong candidate for offering the most versatility in the smallest area. New for 2013, the 3142-FT combines the dozens of ground-based cable exercises that are possible with a functional trainer with all the freeweight barbell exercises available in a half cage. No compromises were made in the combining of the two, as the cage and trainer function just as well as they did independently. The functional trainer features 150 lb weight stacks that are upgradeable to 200 lb or even 250 lb, and the Half Cage can still accept most Legend accessories. Shipping Weight: 1100 lbs. Measurements (LxWxH): 65β X 68.5β X 94β
3171 Fat Bar Power Station The perfect training tool for any serious training, any exercise can be done safely and effectively with this unbeatable combination. Identical to the 3141 Power Station except that it has two upper pull-up bar crossmembers as opposed to one. One pull-up bar is 1ΒΌ inch in diameter, the other is the 2-inch Fat Bar for increasing grip strength. Open top design gives you all the headroom you need for overhead exercises. Also available with a 3-inch thick oak and rubber insert platform as product number 3201. Bars and plates sold separately. Shipping Weight: 464 lbs. Measurements (LxWxH): 59β X 68β X 88β
3141 Power Station
3155 Double-Sided Half Cage Itβs all in a dayβs work when you incorporate the Double-Sided Half Cage into your training. Youβll be amazed at how quickly workouts can be completed when two athletes can train simultaneously. Long safety arms stand guard for when the load becomes too much. The Double-Sided Half Cage can be bolted to a lifting platform or be used totally alone. Besides being infinitely adjustable, this double threat features generous plate storage, the strongest welded J-hooks in the industry, a standard chin bar and a βFAT BARβ chin bar for training variety. Also sold with one oak insert platform as product number 3203, or with two oak platforms as product number 3204. Bars and plates sold separately. Three-Way Benches are optional extras.
Legend
Shipping Weight: 605 lbs. Measurements (LxWxH): 92β X 68β X 88β
13
Performanc Perform Performance SERIES CAGES 3209 Triple Power Cage
Essentially, this is a Performance Series Power Rack and Half Cage merged into one, with a set of inverted safety arms and hooks added outside of the rack to provide three workout zones. Hence, the Triple Power Cage. On one side, a user has the choice of performing exercises within the relative safety of a four-post power rack; or, if the user needs a little more room, he can opt to use the reverse spotter arms and hooks to perform routines in front. On the other side, another athlete can perform half cage routines as well. Also available with a platform as product number 3210. Shipping Weight: 610 lbs. Measurements (LxWxH): 126β X 68β X 92.5β
3903 Continuum Quarter Cage System Formerly known as the Wall-Mount Quarter Cage, the 3903 is now the basic unit in an expandable system of cages that is an economical and modular solution in racking systems. Constructed of the same 3x3-inch steel tubing as our Performance Series cages, the 3903 features 2-inch hole spacing, laser-cut racking numbers, a 42-inch pull-up bar, and a pair of Beefy J-Hooks with solid 1-inch racking pins. Overall, a fantastic solution for those looking to outfit a garage gym on a budget, for Crossfit facilities that need a simple racking system, or for those that need an expandable system that can grow with their facilityβs needs. A variety of side-to-side AND front-to-back connectors in different lengths allow the 3903 to still be mounted to a wall for space-conscious floorplans, or allow a pair of 3903s to be paired back-to-back to create the ever-expanding Continuum System. Shipping Weight: 115 lbs. Measurements (LxWxH): 51β X 48β X 104β
Continuum System Connectors 3903-4BC 3903-4MBC 3903-6BC 3903-6MBC 3903-8BC 3903-8MBC 3903-6SC 3903-6SC-FB 3903-6MSC
14
4β Back Connector 4β Modular Back Connector 6β Back Connector 6β Modular Back Connector 8β Back Connector 8β Modular Back Connector 6β Side Connector Side Connector Fat Bar 6β Modular Side Connector
ce Series Ca mance Serie Performance SERIES CAGEs/Platforms 3202 Half Cage with Platform
A very popular combo. Our best-selling Half Cage paired with our rugged insert platform. The Half Cage is the same space- and budget-saving device that has won the trust of high school coaches all over the nation, and the 6 x 8 foot platform has a handmade tongue-and-groove oak platform with a chip-free finish. The platform frame features only three pieces for ease of assembly and rigidity, and a roll-on ramp. Shipping Weight: 1498 lbs. Measurements: (LxWxH): 127β X 100β X 88β
3201 Fat bar power Station with platform
Bring your athletic training program to the next level with this rack and platform combo. Constructed with 3-inch, 11 gauge tubing with a durable powder coat finish, the 3171 is ready to suspend the weight of your choice. Features include chrome-finished weight pegs, 2-inch hole spacing and the strongest welded J-hooks in the industry. Open top design gives you all the headroom you need above you, and the industryβs best 3-inch thick tongue-and-groove oak insert platform provides firm footing and floor protection below you. Bars and plates sold separately. Three-Way Bench is an optional extra. Shipping Weight: 1444 lbs. Measurements (LxWxH): 140β X 100β X 88β
3199 Power Cage with Platform Shown here with the optional Pro Style top crossmember, product number 3199 is our robust Power Cage accompanied by our impressive Pro Series Insert Platform. The cage is an outstanding value in cages, featuring 3 inch square tubing, 2 inch hole spacing, and the longest list of accessories of any cage in the Legend lineup (see the 3133 Power Cage entry for more information). The Insert Platform is three inches of impact loving rubber and hardwood. The frame is dent resistant 3x2 inch rectangular tubing and is composed of only three pieces. Pro Style Top Crossmember and Swivel Grip Handles are optional extras. Shipping Weight: 1605 lbs. Measurements (LxWxH): 142β X 100β X 88β
Legend 15
Performanc Performa Performance SERIES CAGEs/Platforms 3203 Double-Sided Half Cage w/Platform
Boost the Olympic lift portion of your strength program by adding one of our tough tongueand-groove oak platforms to our Double-Sided Half Cage. Intended for those with floorspace or budget concerns, or for a system of designating one side for heavy-duty Olympic lifts like power cleans and the other for traditional squats and quick bench work. We wonβt tell you how to use it, just know that itβll do the job! Bars and plates sold separately. Three-Way Bench is an optional extra. Shipping Weight: 1585 lbs. Measurements (LxWxH): 165β X 100β X 88β
3204 Double-Sided Half Cage w/two platforms Our Double-Sided Half Cage becomes the centerpiece of the weight room when paired with two of our abuse-loving insert platforms with handmade oak platforms. If your training facility places a priority on Olympic lifts, this may be the solution for you. The cage features all the usual benefits of a Legend Performance Series cage, like 3x3-inch tubing throughout, lasercut numbering, chrome-plated plate storage, and tons of available options that can configure this system to meet the specific needs of your training facility. The platforms also retain the usual Legend quality that has made them a surprise best-seller, boasting a three-piece frame, a roll-on ramp, a handmade oak platform, and thick rubber surfacing. Bars and plates sold separately. Three-Way Bench is an optional extra. Shipping Weight: 2465 lbs. Measurements (LxWxH): 247β X 100β X 88β
3210 Triple Power Cage w/Platform Essentially, this is a Performance Series Power Rack and Half Cage merged into one, with a set of inverted safety arms and hooks added outside the rack to provide three workout zones (as illustrated in one of the photos). Hence, the Triple Power Cage. If you need a lot of flexibility and capability in your next cage system, but donβt have a lot of square footage in your weight room, the Triple Power Cage could be the answer. On one side, a user has the choice of performing exercises within the relative safety of a four-post power rack; or, if the user needs a little more room or wants to do Olympic lifts, he/she can opt to use the lifting platform or reverse spotter arms and hooks to perform routines in front. On the other side, another athlete can perform half cage routines as well. Bars and plates sold separately. Shipping Weight: 1245 lbs. Measurements (LxWxH): 182β X 100β X 92.5β
16
ce Series C ance Series Performance SERIES CAGE options Two-Tone Powder Coat
Match your equipment crossmembers to team or facility colors. J-hooks, safety arms and accessories must remain in chip-resistant Silver Vein finish. Product Number: 2-Tone
Pro Style Top Crossmember
Great looking, this substitution upgrade also offers several advantages: additional clearance for taller users to perform pull-ups, a wide grip bar outside the cage, two neutral grips inside the cage, foam rubber grips for comfort, and the ability to accept 3252 Swivel Grip Handles. Product Number: 3256
Cage Connectors
Experience the phenomenon of Γ’€œshared rigidityΓ’€? by linking your Performance Series cages together with 3x3-inch, fully welded tubing with wide grip and neutral grip pullup bars and attachment points for 3252 Swivel Grip Handles. 3133-72C 72-Inch Front-to-Back Connector 3133-96C 96-Inch Side-to-Side Connector
Landmines
Seamlessly move from one exercise to another while performing variety of exercises like shoulder presses, rows, cleans and laterals. Make the exercises unilateral with Dual Landmine, or hand one of the bars to a partner and you can do mirroring exercises. 3233 Single Landmine 3235 Dual Landmine
Performance Series Monster Hooks
With a long and deep profile, fully welded, and a very tough polymer contact area, this is one upgrade that makes a big difference. Less metal-on-metal contact means less chipping and rust and more energy dispersion in emergency drops. Product Number: 3207
Step Attachment
A fully welded diamond plate platform for the outside front of the cage for step-up exercises. Product Number: 3172
Dip Attachment
Redesigned to feature much longer 17-inch handles to allow more clearance for the user, and more grip positions with 15-inch-long foam rubber grips. Fully welded, secures with a beefy 1-inch bolt. Product Number: 3147
Beefy Spotter Arms
A substitution upgrade for the standard 1-inch safety rods, these are built from 3x2 inch 11 gauge tubing. Built to take a pounding over and above what even a powerlifter can throw at them. Product Number: 3236
Adjustable Band Peg Spotter Arms
Offers height adjustable band training, with three 6-inch band pegs on the outside of each attachment, and featuring a pop pin design that allows the arms to be securely locked in place. Not compatible with Half Cages or the 3230 Combo Cage. Product Number: 3236-B
Walk-Through Olympic Bar Storage
Substitution for lower rear crossmember that features vertical storage sleeves for Olympic bars to slide into that is safer than hanging designs. Located along the sides of the cage, allowing a spotter unobstructed walk-through access! Product Number: 3261
Inverted Safety Arms
Fully welded, with a 1-inch diameter steel rod to bear the weight. Deep front lip for additional safety and provides users with the option of doing lifts in front of the cage as well as within. Product Number: 3244
Legend
Lower Resistance Band Pegs Product Number: 3238-L Upper Assistance Band Pegs Product Number: 3238-U
17
Platforms Platforms Insert Platforms
3223 Pro Series Insert Platform
Our octagonal lifting platforms make the perfect complement to our Pro Series Cages by providing a 6x8-foot lifting area, 3 inches thick with a handmade oak tongue-and-groove insert running back into the cage area. Unlike the channel frames of some of our competitors, our frame is constructed from 3x2-inch rectangular tubing for greater dent resistance. The frame is also consists of only three pieces and features a front ramp standard. Our unique wood finish will not flake or chip, no matter what you drop on it. A custom logo is available as product number 3144-P. If you would rather have more rubber in place of the hardwood, opt for product number 3223-R, but you canβt get a logo on it. Shipping Weight: 1130 lbs. Measurements (LxWxH): 130β X 101β X 3β
7007 VibePlate Platform Studies have shown that sports performance goals can be reached up to twice as fast using Whole-Body Vibration (WBV) training. Placing the vibration device within the platform itself eliminates the risk of stumbling and allows users to safely take full advantage of WBV while doing standing exercises or bench work. According to the Journal of Sports Sciences, athletes will gain strength, speed and mobility faster than conventional training, and with decreased recovery times. Legend quality is evident in a three-piece welded 2x6-inch tube frame and precision-cut rubber flooring. Designed for use with the 2440 VibePlate and Legend 3226 Pro Series Half Cage only. VibePlate is sold separately, measures 24x40 inches and uses the 2mm vertical vibration form that is preferred by experts. Frequency is adjustable from 10-60hz. Shipping Weight: 1350 lbs. Measurements (LxWxH): 113β X 107β X 6β
Weightlifting Accessories
18
3143 Squat Stool
3254 Adjustable Squat Seat
7011 Pulling Blocks
3259 Chalk Bowl /Pedestal
Big steel, a solid all-welded frame and thick padding. Adjusts from 15.25 inches up to 21.25 inches in 2-inch increments. Ship Weight: 32 lbs. 19β X 16β X 21.25β
Fully welded with chrome lock pins and thumbwheels. Durable rubber top for no slipping. 11 inches to 16 inches in 1 inch increments. Ship Weight: 46 lbs. 18β X 18β X 16β
Allows partial deadlifts to place more focus on your hamstrings, glutes and core. Can be positioned for three different heights. Ship Weight: 70 lbs. 16.5β X 13.5β X 10.5β
Stainless steel bowl affixed to a fully welded and powder coated pedestal. Thatβs it. But then again, thatβs all you need. Chalk sold separately! Ship Weight: 54 lbs. 18β X 18β X 40β
s
Freestanding Platforms 3131 6x8 Standard Platform The best value youβll find anywhere on a quality lifting platform. No better platform exists at this quality and at this price point. Despite being our most affordable platform, the 3131 features a beautiful yet very durable laminated birch footing area, complemented precision cut rubber impact areas and measuring three inches thick with layered subflooring to take the abuse of the heaviest cleans. Measures 6x8 feet. Four piece extruded tube frame is simpler, more rigid and more resistant to denting than the competitionβs complex channel frames. Steel ramps are supplied for both sides. Shipping Weight: 848 lbs. Measurements (LxWxH): 84β X 100β X 3β
3139 8x8 Standard Platform The larger of our two independent lifting platforms featuring the beautiful yet very durable laminated birch footing area, complemented by thick rubber padding on either side. That shipping weight is not a typo. Youβre looking at almost a half ton of firm footing and floor protection. The 3139 takes a pounding and keeps coming back for more. Measures 8x8 feet and 3 inches thick. Four piece extruded tube frame is simpler, more rigid and more resistant to denting than what you see elsewhere. Steel ramps are supplied for both sides. Shipping Weight: 948 lbs. Measurements (LxWxH): 108β X 100β X 3β
3194 6x8 Hardwood Platform CAD-developed octagonal frame is constructed from 2 x 3 inch thick tube, which is less likely to get a ding than the extruded channel frames of our competitors, and consists of only four pieces. Fewer frame bits means more rigidity and greater ease of assembly. The 3β4β thick rubber mats are cut with a water jet for a precision fit and manufactured to withstand the punishment it was built for. The tongue & groove oak footing area is handassembled in our factory and treated with a durable non-chip finish. Also available with an all rubber platform area as the 3194R. Shipping Weight: 980 lbs. Measurements (LxWxH): 84β X 100β X 3β
3195 8x8 Hardwood platform Like the 3194 above, but in a more roomy 8x8-foot dimension. Same durable extruded tube frame, dual ramps, handmade oak and thick rubber impact area β just more of it β in case crazy power cleans or the accident prone are anticipated. Shipping Weight: 1020 lbs. Measurements (LxWxH): 108β X 100β X 3β
Legend 19
Legend Fitn Pro Lege Se Specialty cages & Racks
3230 westside barbell Combo Cage
Youβve seen the imitators, now behold the only cage on the market designed to the exacting standards of Louie Simmons of Westside Barbell. Some of the worldβs most powerful men use this sturdy device everyday, and it has never been broken. Unlike any other cage on the market, this cage features 1β incremental loading and spotting graduating to 2β for a total of 41 adjustment points. Elevated base bars accommodate extra wide sumo stances. The Combo Cage comes with adjustable band pegs on both the top and bottom of the cage. The set-up also includes pull-up bar, weight plate storage, and band storage pegs. Performance Series options and accessories are not compatible with this cage. Shipping Weight: 398 lbs. Measurements (LxWxH): 50β X 68β X 87β
3138 Peg Squat Rack The Peg Squat Rack provides the most convenient and safest way to perform squats. This commercial piece of fitness equipment is a staple in the free weight room. Constructed of 3 x 3 inch tubing, it is designed to take the heaviest loads and keep on going. Squat with confidence with this squat rack. Bars and plates sold separately. Performance Series options and accessories are not compatible with this cage. Shipping Weight: 428 lbs. Measurements (LxWxH): 80β X 68β X 70.5β
3121-V Varsity Power Rack Designed to fit the budget of most any strength enthusiast but strong enough to withstand enthusiastic use, the Varsity Power Rack is the most economical rack in our esteemed lineup. Like the Louie Simmons Combo Cage, this cage is constructed of 2-inch square tubing instead of the usual 3-inch, but donβt worry. The uprights are fully welded and the usual Legend quality means that this cage wonβt let you down. Affordability neednβt come at the cost of rigidity. Look into the Varsity Power Rack for your training facility or garage gym today! Performance Series options and accessories are not compatible with this cage. Shipping Weight: 277 lbs. Measurements (LxWxH): 48β X 48β X 88β
20
ness eries end Fitness Cages Free Weights - Utility Benches
3222 Pro Series Self-Adjusting Three-Way Bench
Our top-of-the-line bench that perfectly complements our Pro Series cages. A single pop pin adjusts both the seat elevation and backrest to one of six adjustment angles. Comes standard with an attached diamond plate spotterβs platform that allows using a spotter anywhere in the weight room, not just at the very back of the cage. Wheels and a foam rubber-coated handle provide easy transport. Rubber feet protect floors and lifting platforms. Pads are 10 inches wide to provide the right amount of support but not get in the way of shoulder blades during presses and fly exercises. Pads measure a comfy 3 inches thick. Locating rods are a component of our Pro Series Bench Docking System. Rods are removable so as not to present a tripping hazard when used outside of a cage or rack. Shipping Weight: 258 lbs. Measurements (LxWxH): 62β X 40β X 48β
3103 Three-Way utility Bench Look no further for a bench that sets the standard. It adjusts from 0 to 85 degrees in a flash, and can be rolled about easily with one hand. Features include a fully welded 3x3 inch, 11 gauge all steel frame with chrome plated 3/8-inch thick pop pin plates! Pads are a densely padded 3 inches thick and 10 inches in width β just right to not get in the way of your shoulder blades for press and fly work. Pad height in the horizontal position is 18 inches. The back adjusts to one of seven angles while the seat has three positions. Also available with integrated spotter platform as product number 3216. Shipping Weight: 93 lbs. Measurements (LxWxH): 55β X 21β X 48β
3216 Three-Way w/ Spotter Platform
3164 Four-way utilitybench Has a utility bench ever been this versatile? The Four-Way Utility hits all the stops--decline, flat, four incline angles and an upright position for shoulder work. A removable footrest keeps you stabilized while doing decline exercises or sit-ups. An adjustable seat holds firm as you progress to the next level of incline training, and moving is easy--just grab the handle and roll away. Divest yourself of the notion that you need several utility benches. With the Four-Way Utility, less is more! Shipping Weight: 98 lbs. Measurements (LxWxH): 69β X 21β X 47β
Legend 21
UtilityOlymp Benc Utility Benches
3100 Utility Flat Bench
The Utility Flat just keeps going and going and going. In the gym wars, this is the infantryman of utility benches. Nothing fancy but, oh, so durable and versatile. With over a 101 uses and counting, be glad the Utility Flat is on your side. Fully welded construction, no bolts.
Shipping Weight: 56 lbs. Measurements (LxWxH): 45β X 16β X 19β
3104 Multi-Purpose Bench Expect nothing but the best from the Multi-Purpose Bench. A necessity for dumbbell work and for working out with the Smith Machine (#3124). The diamondplate footplate keeps you securely positioned and the slightly angled back pad provides optimum support. The most brutal workouts are no match for an all-welded construction and rigid frame. Shipping Weight: 155 lbs. Measurements (LxWxH): 44β X 24β X 40β
3101 Incline Utility Bench Meet your new best friend for performing incline dumbbell work. The Incline Utility adjusts from 35 to 70 degrees. A compact and stable base is standard issue. No wobble here! Bring your best and keep your focus where itβs supposed to be -- on the dumbbells, not the bench. Shipping Weight: 150 lbs. Measurements (LxWxH): 54β X 22β X 45β
3102 Decline Utility Bench The Decline Utility gets the job done, and done well. The strategy remains simple: sturdy and strong. The Decline Utility is comfortable, adjustable, and rugged enough to take years of use and abuse. Youβll have one thing to say about the design, βThey got it right!β Adjusts from -10 to -25 degrees with five positions. Shipping Weight: 159 lbs. Measurements (LxWxH): 54β X 19β X 35β
Bench options
22
3205 Bench Transport option
3144 Custom Logo embroidery
Donβt like to commit? Make your set-up a mobile one! The bench transport option includes wheels and handles and can be added to any Legend Fitness utility bench for easy transport and movement through your facility. Ship Weight: 10 lbs.
Just send us the appropriate art file of your desired logo and we can bring it to life on the upholstery of your equipment! Team spirit, anyone?
ches pic Benches Olympic Benches
3240 pro series Olympic Flat
The first of our Olympic benches to be granted Pro Series status, the 3240 has several features that elevate it above our standard Olympic flat: β’ Angled uprights keep bar catches within reach but out of the way β’ 3/8 inch, chrome-plated carbon steel Multi-Catch Racking System β’ CAD developed for minimal bolt usage/maximum rigidity β’ Chrome-plated plate storage β’ Resistance band pegs Bars and plates sold separately. Shipping Weight: 175 lbs. Measurements (LxWxH): 75β X 67β X 46β
3241 Pro series Olympic Incline Build the upper chest effectively and safely with our Pro Series Olympic Incline. Features of this stalwart gym piece include: β’ Angled uprights keep bar catches within reach but out of the way β’ Footrest assists the user in not arching their back β’ 3/8 inch, chrome-plated carbon steel Multi-Catch Racking System β’ CAD developed for minimal bolt usage/ maximum rigidity β’ Integrated, chrome-plated plate storage β’ Resistance band pegs Bars and plates sold separately. Shipping Weight: 195 lbs. Measurements (LxWxH): 81β X 67.5β X 65β
3243 pro series Olympic decline For the definition and βliftβ that you need for your chest workout, our Pro Series Olympic Decline is the finest there is. β’ Angled uprights keep bar catches within reach but out of the way β’ Footrest assists the user in not arching their back β’ 3/8 inch, chrome-plated Multi-Catch Racking System β’ CAD developed for minimal bolt usage/maximum rigidity β’ Integrated, chrome-plated plate storage β’ Resistance band pegs Bars and plates sold separately. Shipping Weight: 195 lbs. Measurements (LxWxH): 85β X 67.5β X 45β
3242 pro series Olympic Shoulder Looking more like a barbarian kingβs throne than an Olympic bench, the 3242 is a fully featured device. Featuring dual uprights and chrome plated multi-racking front and rear for increased safety and to give the user the option of working the barbell in front of the head or behind it. β’ 3/8 inch, chrome-plated carbon steel Multi-Catch Racking System β’ CAD developed for minimal bolt usage/maximum rigidity β’ Integrated, chrome-plated plate storage β’ Resistance band pegs Bars and plates sold separately.
Legend
Shipping Weight: 205 lbs. Measurements (LxWxH): 53β X 67.5β X 70β
23
Olympic Be Olymp Olympic Benches With Storage 3150 Olympic Flat w/ Storage
Itβs that simple and that practical. Built entirely from 3-inch square tubing and fully welded. Itβs not fancy but, oh, so functional. Ten chrome plated pegs take hold of all the Olympic plates you can lift and then some. This wellthought-out design promotes quicker workouts and keeps all your Olympic plates organized and off the floor. Bars and plates sold separately. Shipping Weight: 319 lbs. Measurements (LxWxH): 72β X 65β X 47β
3154 Olympic incline w/ Storage Itβs all about the workout! But you need good tools also, and the 3154 covers all the bases. Six feet of chrome plate storage pegs keep all your Olympic plates close by. There is no wobble and no flex with the allwelded construction. The design locks you into a seated position that promotes proper isolation and reduces lower body muscle recruitment. Bars and plates sold separately. Shipping Weight: 390 lbs. Measurements (LxWxH): 76β X 55β X 55β
3156 Olympic shoulder w/ Storage Substantial proportions of big steel and rock-solid construction define the 3156. Tough ABS plastic wear guards in the saddles are designed to take a beating so your equipment doesnβt have to. Thick padding ensures proper support and maximum comfort. The angled back pad provides appropriate body placement while maintaining ease of use. Top all of this with a 10-peg chrome plate-storage system and a huge spotterβs platform and you have unsurpassed value. Bars and plates sold separately. Shipping Weight: 345 lbs. Measurements (LxWxH): 60β X 65β X 65β
3157 Olympic decline w/ Storage Itβs hard to improve on a classic. Throw in a wonderfully substantial plate storage system and see what happens. Quick and easy access to your Olympic plates will make workouts quicker and better. The 3157 has all-welded construction from big 3-inch square tubing. A fully adjustable foot roller system holds you in position while you push yourself to the limit. The black UHMW plastic in the saddles and chrome weight storage pegs keep the equipment looking new workout after workout. Bars and plates sold separately. Shipping Weight: 345 lbs. Measurements (LxWxH): 88β X 65β X 46β
24
enches pic Benches Olympic Benches
3105 Olympic Flat
Solid as granite, the Olympic Flat is the simplest way to facilitate chest burning workouts and the need to rack the bar between sets. A comfy pad, a durable DuPont powder coat finish in the hue of your choice, heavy duty vinyl rub strips and Legendary build quality in a simple, effective package. Bars and plates sold separately. Shipping Weight: 235 lbs. Measurements (LxWxH): 51β X 55β X 47β
3106 Olympic Incline The Olympic Incline is imposing at first glance, but look closer. Lean back on a 35Β° angle and prepare to put the hurt on your upper chest. Youβre always correctly positioned, thanks to the adjustable seat. The large spotterβs platform enables assistance to arrive in the nick of time. Bars and plates sold separately. Shipping Weight: 276 lbs. Measurements (LxWxH): 61β X 55β X 55β
3108 Olympic Shoulder The Olympic Shoulder Bench now features a forward set of bar catches for military presses as well as the usual behind-the-head catches for traditional shoulder presses. The top-stitched seat and upright seatback provide the critical back support. Features also include a diamond plate spotter platform. the 3108 is fully welded of 3-inch tubing, so strength and stability is abundant. Bars and plates sold separately. Shipping Weight: 270 lbs. Measurements (LxWxH): 45β X 55β X 65β
3109 Olympic Decline Your lower chest work will spring to life when using the Olympic Decline. This piece is built to deliver strength, and it does. Your pecs will be asking, βWhere did this come from?β The Olympic Decline is adjustable for all body types. Bars and plates sold separately. Shipping Weight: 258 lbs. Measurements (LxWxH): 65β X 49β X 46β
Legend 25
Free Pro Weigh Se B Free Weights - upper Body
3225 prone high row
For specific exercises that are not easily done on other machines or free weight equipment. For athletes it is also very important for injury prevention. The high height of the bench makes it possible to perform rows through a full range of motion without the need to hold the body in support. This device sidesteps the inability to hold the torso level and places a focus on where strength is needed β in the back. Beefy J-Hooks are height adjustable. Recommended for use with cambered bars. Shipping Weight: 450 lbs. Measurements (LxWxH): 73β X 49β X 38β
3114-PS Ultimate Preacher Curl Our Preacher Curl devices come in two flavors, both with welded construction, correct geometry and high density padding. The 3114-PS adds a welded forward extension with chrome plated weight storage and resistance band pegs. The resistance band anchor points allow users to vary their routine and reach for more strength than ever before, while the attached weight storage reduces time between sets. Bars, plates and bands sold separately.
standard Shipping Weight: 3114-PS: 254 lbs. 3114 3114: 200 lbs Measurements (LxWxH): 3114-PS: 66β X 30β X 46β 3114: 39β X 30β X 40β
3166 Standing preacher curl Sometimes simplicity is a virtue. You canβt beat the basics. The arm pad is two-feet wide and heavily padded with two-inch thick dense foam, which is contoured specifically over the top and into the chest area to allow comfort and support. It also adjusts all the way up to a height of 58 inches. Bars and plates sold separately. Shipping Weight: 197 lbs. Measurements (LxWxH): 63β X 30β X 61β
3145 Curl pedestal The sturdy starting and ending point for all of your curl bar exercises. Tough UMHW wearguards are there to protect the powder coat finish, and four handy, chrome-plated weight storage pegs allow you to quickly change and add plates, keeping you in the flow of your workout. Bar and plates not included. Shipping Weight: 159 lbs. Measurements (LxWxH): 31β X 29β X 39β
Free Weights - lower body 7005 squat stands Our most cost-effective solution for boosting squat performance. Constructed from fully welded 2-inch steel tubing and featuring a lifting height of anywhere from 40ΒΌ to 67ΒΌ inches and a stable 24 x 18 inch base. Most often sold in black, but call for color availability. 400lb. capacity. Ship Weight: 73 lbs. Measurements (LxWxH): 24β X 18.5β X 76β
26
7005-C squat stand connector If you need extra stability and safety in your squat stand exercises, this section of tubing slides inside the rear feet of the 7005 squat stand and secures with wingnuts. Now you know that after you begin your set, both stands will still be where you expect them to be.
hts Body eriesWeight Cages Body Weight - Upper body & core 3311 Core Spider
Despite looking like an escapee from a 1950βs sci-fi flick, this is actually an extremely versatile device for core training. Plop a large balance ball on the platform, set the distance of the footplate, adjust the ankle rollers, and get those abs burning!
Wide stance legs with rubber footing keep things as stable as they can be, while semi-circular handles make ingress/egress easy with an additional measure of safety and also serve as anchor points for resistance tubing. Completely adjustable to accommodate all body shapes and sizes, and ease of adjustment is facilitated through wheels mounted at the base of the foot plate assembly. Fully welded construction features aluminum diamondplate ball platform, removable ball cradle, and a steel diamondplate foot platform. All telescoping surfaces are chromeplated for scratch resistance. A Core Spider Exercises poster is provided, but can also be downloaded in PDF format from our Resources webpage. Balance ball sold separately. Shipping Weight: 262 lbs. Measurements (LxWxH): 52β X 38β X 30β Optional βhockeyβ style footbox.
3127 45 Degree hyperextension
3160 Oblique Flexor
3151 Horizontal Hyperextension
Fully welded construction with diamond plate foot platform, heel riser, dual hip pads for comfort, chrome-plated adjustment surfaces and UMHW wearguards on the base.
Again, fully welded construction with diamond plate foot platform, heel riser, dual hip pads for comfort, chromeplated adjustment surfaces and UMHW wearguards on the base.
Assistance handles for easy entry and exit. Split thigh pads are slightly angled for comfort and proper body alignment. Fully welded construction, chromeplating where it matters.
Shipping Weight: 190 lbs. Measurements (LxWxH): 55β X 30β X 36β
Shipping Weight: 190 lbs. Measurements (LxWxH): 55β X 30β X 36β
Shipping Weight: 173 lbs. Measurements (LxWxH): 49β X 24β X 49β
body Weight - lower body 3162 sissy squat Your legs wonβt call this a Sissy Squat. Talk about a direct transmission of resistance to your legs! And with only your body weight! Youβre held in place by foot rollers and a contoured pad that is adjustable for different tibia lengths. Then, keeping the hips rigid, lean backward from the knees up. Yeah, it ainβt easy. Your quads will feel like lava in no time. Itβs a whole lot of leg devastation in a very small footprint. The frame is a single piece welded from 3-inch square tubing, and the adjustment surfaces are chrome-plated for scratch resistance.
Legend
Shipping Weight: 69 lbs. Measurements (LxWxH): 36β X 24β X 19β
27
Body Weigh B Body Weight - Upper body & core 3113 Dip/ab/pushup
3146 Double dip stand
Fully welded 3-inch square tubing with elbows cosseted by pads underneath and to the outside while another pad cradles the lower back. Move forward for dips. Hit the floor for elevated push-ups. All handles have cushy foam rubber grips and there are non-slip surfaces on the step areas.
Itβs a fully welded monolith mocking your triceps. Use the guy next to you as inspiration or challenge them to a staring contest as you get a big pump going. Features include comfy foam rubber grips up top for dips and down below for elevated push-ups. Non-slip step surfaces.
Shipping Weight: 250 lbs. Measurements (LxWxH): 52β X 38β X 64β
3128 dip/chin/push-up
3153 Dip/chin/ab/push-up
A single welded piece of 3-inch tubing, the Dip/Chin/Push-Up Station has no bolts anywhere. This is your personal tower of power. Multiple pull-up grips, dip handles and finally elevated push-up handles to give you greater range of motion than doing floor push-ups. All handles have foam rubber grips and there are non-slip step surfaces.
All together now, we have a threepostion pull-up bar, a knee lift station with four elbow pads and a lumber pad, two grips up front provide a dip station, and down low is another elevated dip station. All handles have cushy foam rubber grips and there are non-slip surfaces on the step areas. Fully welded design means no bolts and the ultimate in rigidity.
Shipping Weight: 384 lbs. Measurements (LxWxH): 66β X 47β X 90β
Shipping Weight: 438 lbs. Measurements (LxWxH): 70β X 47β X 90β
3116 Mini sit-up
3178 Gravity crunch
Since day one, sit-ups have been around. Now reach for the piece that gets you off the floor. The Mini Sit-Up takes only a 48β x 24β space. The 30Β° angle provides adequate resistance for ab work, and shin rollers keep you in position. The rest is up to you.
The difficulty of the exercise can be adjusted by shortening or lengthening the reach to the chrome-plated foot bar. The lower the foot bar, the lower the userβs hips are from the pivot point, which increases the effort required to complete a crunch. Round foot bars can accommodate weight plates.
Shipping Weight: 136 lbs. Measurements (LxWxH): 42β X 27β X 30β
28
Shipping Weight: 290 lbs. Measurements (LxWxH): 60β X 25β X 57β
Shipping Weight: 228 lbs. Measurements (LxWxH): 45β X 32β X 63β
3161 Ab Crunch Board
3176 sit-up board & Ladder
Performing Ab crunches properly is hard work, but the comfortable, thickly padded 3163 takes out the guesswork with an elevated knee position that reduces lower back strain. Leg pads adjust for femur length. Also features chrome-plated adjustment surfaces.
Adjustable height and angle increases the difficulty along with the userβs ability. Generously padded and a system of ankle rollers with two angled leg pads place the user in the proper form for maximum gains. Completely welded ladder features six rung heights and wheels on the situp platform ease transitions
Shipping Weight: 206 lbs. Measurements (LxWxH): 64β X 20β X 51β
Shipping Weight: 296 lbs. Measurements (LxWxH): 97β X 24β X 52β
ht Body Weight glute/ham developers (GHDs) 7006 Yessis Glute/Ham/back developer
Designed by the inventor of the glute/ham/developer, Dr. Michael Yessis, to provide a device that more closely resembled the ideal he put forward decades ago. Provided with an instructional DVD and manual that gives a fresh understanding of what it takes to increase running speed, acceleration and jumping ability β along with a much healthier lower back and a stronger core. Unique features include: β’ Peaked pad design for maximum back and hamstring stretch β’ Low standover height β’ Transport wheels β’ Angled handles and feet provide barbell/dumbbell clearance β’ Guide rod located by a linear bearing eases footplate adjustment β’ Resistance band anchor points β’ Accommodates users over 7β tall Shipping Weight: 292 lbs. Measurements (LxWxH): 79β X 35β X 49β
3214 pro series Glute/Ham Developer Itβs an over-used phrase, but a GHD really is a necessity for every serious strength facility. Used correctly, these devices will profide a very intense workout for the posterior chain. Glutes and hamstrings are where an athlete generates his explosive power and acceleration, and yet the prevalence of hamsting injuries demonstrates how little these muscles are suitably trained. Luckily, Legend Fitness builds the most robust GHD on the market in our 3214. Extra padding, resistance band pegs, aluminum diamond plate foot platform, wear guards and only 4 frame bolts make sure this GHD is effective and built to last. Four linear bearings sliding on tandem steel guide rods make foot platform adjustments a breeze. Shipping Weight: 398 lbs. Measurements (LxWxH): 82β X 36β X 53β
3350 Partner GHD
7003 Varsity GHD
The most affordable posterior chain training tool on the market. By substituting a partner or the baseboard of a wall for the footplate, we have greatly reduced the material cost but kept the essentials that give the user a very intense workout.
Another economical solution for exercising the core and posterior chain. Bolt-together design makes shipping more affordable, but flanges on the bolted joints keep things strong and sturdy. Comes with a split thigh pad.
Shipping Weight: 27 lbs. Measurements (LxWxH): 29β X 23β X 12β
Shipping Weight: 118 lbs. Measurements (LxWxH): 63β X 20β X 47β
3130-S Glute/Ham/Developer A perennial best seller, the 3130 makes lots of friends as a result of its robust construction and incredible value. Features include a diamondplate foot plate that is quick to adjust for height and length with quality pop pins and chrome plating, a guide rod to keep things from binding when adjusting for length and also to lend stability during exercises, a welded frame featuring resistance band pegs and heavy duty wear guards on the upper surfaces. NOTE: 3130-S is offered with a split pad. Model number 3130 (without the βSβ) has a solid pad.
Legend
Shipping Weight: 240 lbs. Measurements (LxWxH): 69β X 25β X 47β
3130 Solid Pad
29
Plate-Loade Pla plate-loaded - upper Body 3229 pro series Incline Lever Row
Lat work is everything itβs supposed to be with the Incline Lever Row. This simple design drastically reduces low-back strain and lets your lats do the work instead. Multi-position handgrips add variety and round out your training. Being a Pro Series item, the 3229 has been upgraded with adjustable, wheeled footplates for quick adjustments between users. Main frame is fully welded for maximum durability and rigidity. Also available with a rigid diamond plate foot platform as the 3110. Plates sold separately.
3110 Incline Lever Row
Shipping Weight: 302 lbs. Measurements (LxWxH): 86β X 40β X 50β
3260 t-bar row
3136 lat/ low row
Plates sold separately.
Plates sold separately. A very complete back exercise that forces use of the core to stabilize the upper body while performing gravityresisted rows from lower-than-floor level. Weight storage tree is standard.
2-in-1 tool for a massive back. Fully welded. Exchange one snap link for another to move from deep reaching floor rows to pulldowns. Chrome load pegs, frame wearguards.
Where powerful linemen are born. For ground-based thrusting exercises that build upper body and trunk strength for gridiron combat. Chrome-plated weight pegs, smooth pillow block bearings.
Shipping Weight: 157 bs. Measurements (LxWxH): 72β X 57β X 34β
Shipping Weight: 455lbs. Measurements (LxWxH): 79β X 28β X 91β
Shipping Weight: 597 lbs. Measurements (LxWxH): 63β X 80β X 84β
3124 Smith Machine
30
3140 destroyer
3165 Trap shrugger
3220 WEstside barbell grappler
Featuring a 25 lb counter-balanced Olympic bar on a 5Β° path of motion. Features linear bearings, ABS-covered safety pegs, and 6 chrome-plated storage pegs.
Plates sold separately. Give your traps the focused burn that they need. Load this up and shrug it out. Robust, fully welded construction with chrome-plated Olympic-size loading pegs.
The 3220 is a weighted base plate with two gimbaled sleeves into which the user secures one or two Olympic bars for a wide variety of upper body and lower body functional training.
Shipping Weight: 720 lbs. Measurements (LxWxH): 55β X 85β X 92β
Shipping Weight: 130 lbs. Measurements (LxWxH): 24β X 52β X 24β
Shipping Weight: 80 lbs. Measurements (LxWxH): 24β X 18β X 6β
ed ate-Loaded plate-loaded - Lower Body 3308 unilateral angle leg press
Great for balancing the strength in your legs or rehabilitating one leg at a time. Standout features of this piece include a latch mechanism to lock the footplates together, closed linear bearings gliding on 1ΒΌ-inch solid steel rods, resistance/assistance band hooks for overspeed training and more technique options. Also, horizontal weight pegs are easier to load, a narrow seat bottom design that makes it easier to step in and step out, 6-position safety stops, and extra long weight pegs that can hold up to 13 plates on each foot carriage! Plates sold separately. Shipping Weight: 710 lbs. Measurements (LxWxH): 102β X 51β X 67β
Plates sold separately.
Plates sold separately.
3224 Leg press/ hack squat combo
3122 Angle leg press
3123 Hack squat
Behold a fully welded mammoth frame, with linear bearings on case-hardened alloy steel shafts, chrome weight pegs, adjustable seat, angled weight horns, a huge footplate area and calf raise plate.
Again, a large yet fully welded frame for more rigidity than the competition. Linear bearings roll on case-hardened alloy shafts for years of smooth operation. Chrome weight storage and angled load pegs.
Two great exercises within the floor space of one machine. Switching between the two is a simple matter of removing the footplate and seat back. Chrome weight storage.
Shipping Weight: 620 lbs. Measurements (LxWxH): 89β X 67β X 57β
Shipping Weight: 650 lbs. Measurement: (LxWxH): 83β X 59β X 59β
Shipping Weight: 754 lbs. Measurements (LxWxH): 89β X 67β X 59β
Plates sold separately.
3119 seated calf
3152 standing calf
Effective in isolating the soleus muscle, and in strengthening the Achilles tendon. By using more explosive reps, it is also possible to develop the muscle fibers to assist in jumping and in faster running strides.
Features an angled footplate that maintains foot placement and maximum stretch. Height adjustable. The load lever pivots on a machined housing w/ low loading points over chrome-plated weight pegs.
Shipping Weight: 190 lbs. Measurements (LxWxH): 52β X 25β X 41β
Shipping Weight: 242 lbs. Measurements (LxWxH): 53β X 26β X 75β
3175 standing leg curl Self-adjusting roller pad and offset pivot accommodate a wide range of user heights. The hip pad and rubber hand grips keep you stabilized while the singleleg training enhances the focus on your hamstrings. A large, checker foot platform and the big steel frame provide a rigid piece of equipment. Shipping Weight: 180 lbs. Measurements (LxWxH): 25β X 30β X 44β
Plates sold separately.
Plates sold separately.
3135 Leg Extension/ leg curl The backrest adjusts to an upright position for extensions and then drops to a decline angle that promotes proper body alignment for curls. Strategically placed handles keep you locked into place. Shipping Weight: 276 lbs. Measurements (LxWxH): 67β X 24β X 42β
3129 squat machine Perform squats safely and securely on horizontal or angled foot platforms. Reduce the weight and do leaps to build explosive power. Slide the Calf Blaster over the platform and tippy toe your way to stronger sprints. Sliding pegs allow for three starting heights.
Plates sold separately.
Legend Shipping Weight: 540 lbs. Measurements (LxWxH): 75β X 29β X 65β
31
Plate-Loade L plate-loaded
6001 Shoulder Press
The first member of our ground breaking plate-loaded LeverEDGE line, the ergonomics on this piece were thoroughly researched. Built to last with beefy pillow block bearings that are smooth, tough and yet easy to replace. The seat is constructed from 32 oz. top stitched vinyl over high quality, dense foam.Features include: β’ Integrated weight storage for 45lb, 35lb, 25lb, and 10lb plates β’ Chrome-plated weight storage and loading pegs β’ Seat adjustable for height and angle β’ 3-position handle grips - inside, wide and neutral
Shipping Weight: 406 lbs. Measurements (LxWxH): 49β X 61β X 53β
Plates sold separately.
6002 Incline Chest Press Designed to be biomechanically correct, with features that maximize versatility. More rigid and compact than the competition, but will break down to fit through a standard 36-inch door. Sturdy pillow block bearings are smooth, extra durable and easy to replace should the need arise. Compact footprint helps make the most out of any floor plan. Features include:
β’ Seat adjustable for height and angle β’ 3-position handle grips - inside, wide and neutral β’ Extra long loading pegs will each hold 7+ plates β’ Variable starting position with easy-to-adjust spring loaded lever stops
Shipping Weight: 495 lbs. Measurements (LxWxH): 64β X 63β X 54β
Plates sold separately.
6003 Flat Chest Press Another star member of our premier plate-loaded LeverEDGE line. Designed to offer more value, features and results than the competition. Two-tone paint, top-stitch 32 oz. upholstery and with minimal assembly. Smooth and strong pillow block bearings are extra durable but easy to replace. Features include:
β’ Integrated weight storage for 45lb, 35lb, 25lb, and 10lb plates β’ 3-position handles - inside, wide and neutral β’ Extra long loading pegs will each hold 7+ plates β’ Variable starting position with easy-to-adjust spring loaded lever stops β’ Bench height is tournament compatible for powerlifters-in-training
Shipping Weight: 359 lbs. Measurements (LxWxH): 70β X 61β X 46β
Plates sold separately.
6004 Seated Vertical Row The worldβs best way to blast your back and arms without a spotter but within a small footprint. Unilateral design keeps a strong arm from compensating for a weak arm and the adjustable pads, multiple grips and multiple footing options keep the body mechanics honest for a variety of body types. The frame is divided into only 4 pieces to retain the ultimate in rigidity yet fit through a 36-inch wide single door. Features include:
β’ 4-position handles - high, low, wide and neutral β’ 2-position chrome-plated foot pegs β’ Extra long loading pegs will each hold 7+ plates β’ Seat and sternum pads are adjustable for height and reach
Shipping Weight: 401 lbs. Measurements (LxWxH): 53.5β X 70β X 51β
Plates sold separately.
6005 Lat PUlldown Looking like a menacing praying mantis that wants to give you massive lats, the 6005 is the largest member of our otherwise compact LeverEDGE line. Precisely positioned leverage arms hover above comprehensive plate storage and a wide pair of thigh rollers are prepared to hold you in place. Features include:
β’ Integrated weight storage for 45lb, 35lb, 25lb, and 10lb plates β’ Chrome-plated weight storage and loading pegs β’ 3-position handle grips - inside, high and rotating low β’ Seat and thigh pads are adjustable for height
Shipping Weight: 422 lbs. Measurements (LxWxH): 81β X 59β X 73
32
Plates sold separately.
ed LeverEDGE plate-loaded
6006 Vertical Wide Chest Press
Get all the benefits of a converging chest press but in a smaller footprint. No need for a spotter to get a thorough chest workout, just step aboard and admire the smooth action of the heavy duty pillow block bearings and the carefully engineered ergonomics. Itβs a CAD-developed Throne of Power! Features include:
β’ Extra long loading pegs will each hold 7+ plates β’ Aluminum diamondplate foot platform β’ Seat adjustable for height & angle β’ Inward-facing loading pegs minimize footprint
Shipping Weight: 388 lbs. Measurements (LxWxH): 64β X 67β X 32.5β
Plates sold separately.
6007 seated bicep curl The perfect plate-loaded bicep machine. The defining feature of this piece is the complete absence of cams or cables in the articulation of the exercise. This means there is a direct transfer of energy during the lifting motion. It also means that there is increased durability and reduced maintenance costs over the life of the machine. Rotating handles reduce strain on wrists and forearms. Features include:
β’ 2-position rotating handles for less strain on wrists and forearms β’ Extra long loading pegs will each hold 7+ plates β’ no cams or cables for direct energy transfer & minimal maintenance β’ Seat adjustable for height
β’ unilateral lever action
Plates sold separately.
Shipping Weight: 340 lbs. Measurements (LxWxH): 44β X 67β X 43β
6008 Trap Shrug/lunge/deadlift One of the most unique and versatile members of the entire LeverEDGE line, the 6008 provides a variety of exercises for both upper and lower body, such as trap shrugs, lunges, split lunges, deadlifts and onelegged squat lunges. Features include:
β’ Dual handles for narrow and wide grip positioning β’ Handles are angle adjustable for inward- and outward-facing exercises β’ Extra long loading pegs will each hold 7+ plates β’ Thickly padded ankle rollers for squat lunges are adjustable for length
Shipping Weight: 364 lbs. Measurements (LxWxH): 64β X 67β X 32.5β
Plates sold separately.
6009 high row (45 degree) Cable rows and vertical rows focus somewhat on the middle of the back. Lat pulldowns focus somewhat on the outer portion of the lats. This LeverEDGE High Row mimics the old school 45 degree row to hit somewhere in between. Like the rest of the LeverEDGE line, the cockpit of the 6009 is very adjustable, featuring four different positions in 2-inch increments for the seat and sternum pad, and 11 positions in 1-inch increments for the thigh pads, complemented by two position chrome-plated foot pegs. Features include:
β’ 2-position chrome-plated foot pegs β’ 4-position handles - high, low, wide and neutral β’ Extra long loading pegs will each hold 7+ plates β’ Seat and sternum pads are adjustable for height and reach
Plates sold separately.
Shipping Weight: 528 lbs. Measurements (LxWxH): 91β X 67β X 89β
6011 Leg Extension/curl combo In contrast to the usual leg extension/leg curl, the LeverEDGE 6011 forces each leg to fend for itself by being unilateral, promoting equal muscle development in each leg. All meaningful ergonomic dimensions are extremely adjustable, with chrome-plated adjustment surfaces. Robust pillow bearings are as smooth as they are tough, and the generous seating area is as durable as it is comfortable. Features include:
Legend
β’ Angled, chrome-plated weight loading pegs β’ Fully independent leg actuation β’ Seat back, seat angle & leg rollers are hyper-adjustable for angle and reach
Shipping Weight: 305 lbs. Measurements (LxWxH): 65β X 75β X 48β
Plates sold separately.
33
Plate-Loade Wests Plate-loaded Westside barbell 3211 Bent Pendulum Reverse Hyper
The top-of-the-line when it comes to the extensive Westside Barbell suite of unique Reverse Hypers. By bending the weighted pendulum rearward, Louie sought to provide more eccentric momentum on the return stroke, providing a greater stretching effect for the lower back, glutes and hamstrings of the user. This emphasizes the rehabilitative properties of the Reverse Hypers by allowing more stretching of the posterior chain muscles and more lubrication of the lumbar discs than ever before. Since the center of gravity was extended behind the machine, a second set of handles catch the pendulum and hold it in a position to facilitate ingress/egress from the machine. The chassis and the tilting platform are the same as on the 3234 Tilt Reverse Hyper, so the user gets the benefit of being able to address the posterior chain group of muscles at different angles, placing emphasis in specific areas for precisely targeted strength/rehab benefits. Plates sold separately. Shipping Weight: 364 lbs. Measurements (LxWxH): 60β X 46β X 46β
3234 Ultra Supreme Reverse Hyper This model features an adjustable tilt table. Use it with the table set straight for the same effect you get on all Louie Simmons Reverse Hypers. Use it with table tilted down at the front and feel the stretch and decompression like never before. Tilt the platform down at the rear to place more focus on the erectors and the glutes. Supplied with a web strap and with a carefully articulated foot cradle with upholstered ankle rollers. Dual grab handles at the front assist varied user statures. Step platforms feature grip tape for sure-footedness. Pillow block bearings are very smooth, can handle a lot of weight and feature grease fittings. This is the one and only, and the device that Louie used to rehabilitate a broken back after doctors told him his lifting days were over. Plates sold separately. Shipping Weight: 375 lbs. Measurements (LxWxH): 56β X 46β X 46β
3212 Reverse Hyper Pro
3213 Reverse hyper ultra
Offering the same great strengthening and rehabilitating properties as the rest of the Reverse Hyper lineup, but with the web strap only. A welded frame, a thick pad and two handle grips round out the features of this revolutionary posterior chain developer.
The genuine plate-loaded masterpiece, this is a must for every serious sports training facility. This piece will develop your low back, hips and glute area unlike any other. Like the 3234, this model features a foot cradle with thickly padded ankle rollers.
Plates sold separately. Shipping Weight: 355 lbs. Measurements (LxWxH): 52β X 40β X 43β
34
Plates sold separately. Shipping Weight: 365 lbs. Measurements (LxWxH): 52β X 40β X 43β
ed side Barbell Plate-loaded Westside barbell 3304 Performance Series Inverse Curl Machine
Inverse leg curls are critical in placing focused effort on the hamstrings, a notoriously underworked muscle - even among athletes. The problem with inverse leg curls is that they are really hard to do, especially for the novice or those with large upper bodies. Enter the latest stroke of genius from Louie Simmons, the Inverse Curl Machine. By using an extremely adjustable counterweight system, the user can be gradually assisted in developing the hamstrings by varying the amount of assist weight and by adjusting the starting angle of the padded lever arm. Shipping Weight: 355 lbs. Measurements (LxWxH): 76β X 58β X 63β Plates sold separately.
Chrome-plated cam plate and pop pin adjusts starting position to one of 27 angles.
Extra large, thick knee pad for comfortable use by users of all sizes.
Fully upholstered foot and ankle pads with a diamond plate foot platform.
3303 Pro Series Inverse Curl Machine This machine concentrates effort on one of the most difficult-to-train muscle groups and does it in a manner that grows with the userβs abilities, even if they are injured. A height-adjustable chest roller supports the upper body and forces the hamstrings to be the primary source of motion. The amount of assistance on the return to the upright position is varied by the amount of weight loaded as a counterweight and by adjusting the starting position of the support arm. Features that separate this Pro Series model from the value-oriented Performance Series Inverse Curl include: 1) Larger footplate to accommodate a greater range of user statures and foot stances 2) Additional guide rod and linear bearings for extra smooth footplate adjustments 3) Integrated weight storage with chrome-plated Olympic-size weight pegs Shipping Weight: 443 lbs. Measurements (LxWxH): 76β X 70β X 63β Plates sold separately.
Extra large aluminum diamond plate footplate.
Smooth footplate adjustment via linear bearings on a solid 1-inch guide rod.
Four chrome-plated Olympic size pegs keep plates nearby.
βWe have worked with Legend Fitness for a few years now and I can say that it is a treat to be able to call and get a pleasant voice on the phone no matter what time of day. Someone is there to take care of us. We are very pleased with the quality of the products that they produce for us, so much that I asked to be considered a dealer for all their equipment because I know I can be proud to show them to my customers and clients. We have many visitors to our gym, and they get to see the real powerlifters and football players that Lou trains put these pieces through the test of ruggedness.β Louie Simmons - Westside Barbell
Legend 35
Westside B Speed Plate-loaded Westside barbell 3306 Performance Series Hip & Quad developer
Exercises that specifcally build the quariceps have typically been the domain of the ubiquitous leg extension machine. Unfortunately, those machines can be hard on the knees at higher weights and they only offer one exercise. A brilliant alternative is the latest Westside Barbell development, the Hip & Quad Developer. You can use it like any other sissy squat device, or you can use weight plates for counterbalancing assistance. Ideal for developing quads, hip flexors and core, even among injured athletes. The 3305 and 3306 are the only variable effort sissy squat devices in the world, and they are patent protected. Features include 17 starting positions for the padded and upholstered lever arm, a generously cushioned calf pad, aluminum diamond plate footplate, and chrome plating in all the places that matter. Fivefooted frame design is stable and uses only three bolts for the ultimate in rigidity. Plates sold separately. Shipping Weight: 355 lbs. Measurements (LxWxH): 72β X 58β X 64β
3305 Pro Series Hip & Quad Developer This latest strength building invention from powerlifting guru Louie Simmons, works much the same way as the Inverse Curl, but for the anterior of the legs rather than the posterior, focusing on building the quadriceps and the hip flexors. The user employs weight ballast and variable starting positions to determine how much assistance they want and through what portion of the repetition in performing sissy squats. Safer and more versatile than a typical leg extension machine, especially at higher weights, this device uses constant tension in the eccentric and concentric phases of the repetition to build crazy quads, hip flexors and core, while being flexible enough to allow hurt athletes to build legs back from injury. This Pro Series model differs from the 3306 (see below) in that it offers chromeplated Olympic peg weight storage. Legend Fitness is the exclusive manufacturer and this design is patent protected. Plates sold separately. Shipping Weight: 396 lbs. Measurements (LxWxH): 72β X 69β X 64β
Large calf pad is height Aluminum diamond plate for adjustable and generously underfoot traction and foot cushioned under 32oz vinyl. roller locks the user in place.
More Westside Barbell Originals 3217 Belt Squat Machine
3218 Plyo Swing
A real Louie original, the 3217 allows athletes to get a full squat workout without putting a bar on their back. The wide deck plate offers plenty of platform space for everything from a close athletic stance to a sumo stance. Add to this split squat stances, lunges and box squats. Use handles for pullthroughs and even Zercher squats.
The Plyo Swing is tremendous for building take-off and landings. By adding weight, it changes mass and by adding bands, it changes velocity for over-speed eccentrics. This piece is tremendous for explosive strength.
Plates sold separately. Shipping Weight: 690 lbs. Measurements (LxWxH): 84β X 47β X 68β
36
Plates sold separately. Shipping Weight: 741 lbs. Measurements (LxWxH): 100β X 65β X 79β
Barbell & Strength speed & strength tools
3231 Performance Plyo Cushions
Constructed from a very firm, dense foam and upholstered in a heavy duty tarp material. Offered as three pieces of varying heights, they can be mixed and matched to provide seven height options, from 6 to 42 inches. Enormous Velcro tabs around the edges secure the segments to one another. Since they βgiveβ more than welded steel plyo boxes, they encourage greater participation from stabilization muscles, and since they arenβt made from shin scraping steel, the user is encouraged to dig deeper and attempt higher jumps, resulting in greater gains. Shipping Weight: 145 lbs. Measurements (LxWxH): 36β X 36β X 42β
3206 Plyo Boxes A set of six durable, fully welded boxes with a thick rubber top, measuring 12, 18, 24, 30, 36, and 42 inches tall. Also available without the 42-incher as a five box set, model number 3134. Shipping Weight: 264 lbs. Measurements (LxWxH): 35β X 35β X 42β
3310 Adjustable step-up box
3219 Westside barbell pull sled
For weighted plyometrics or box squats. Fully welded. Steel platform tray w/ thick rubber surface. Transport wheels and foam rubber handle ease movement. Adjusts in 3-inch increments from 9 to 24 inches. Shipping Weight: 236 lbs. Measurements (LxWxH): 37β X 36β X 26β
The pulling sled designed by Louie Simmons. Fully welded with a centrally located Olympic weight peg. Supplied with a web leash. Shipping Weight: 19 lbs. Measurements (LxWxH): 23β X 12β X 16β
3262 pro series Push/Pull Power Sled No need to prowl with our Pro Series sled, itβs coming through the front door and kicking all other sleds in the teeth! Multiple strap attachment points and handle options make this the most versatile sled on the market. Tall, Olympic size rods are removable and serve a dual purpose - as an extra set of push handles, or as an extra set of weight pegs to complement the weight peg in the center. Can also be loaded with kettlebells. Sled feet are replaceable, and the frame is a single welded piece of 2x2-inch and 2x3-inch steel. Shipping Weight: 95 lbs. Measurements (LxWxH): 40β X 33β X 36β
3400 Modular Push/Pull Sled Designed to be the most versatile and value-packed sled on the market. Build stronger linemen and more explosive runners with this multi-faceted device! Three tiers of pushing handles allow the user to work on power and core strength in three different stances. Attach a belt or handles to the eyelets on the front for running, lunging & upper body exercises. Then, link up to seven of them together to get an entire defensive line ready for the season opener! Two Olympic chrome-plated weight pegs center the weight and keep things from shifting.
Legend
Shipping Weight: 164 lbs. Measurements (LxWxH): 72β X 34β X 54β
37
Weight Sto Storag dumbbell & kettlebell storage 3239 Four-Tier Hex Head Dumbbell RAck
Just in case you need to get every hex head dumbbell in your county off the floor, we have built the mother of all racks. Four tiers of powder coated goodness that can hold 20 pairs of dumbbells. No bolts. One big welded piece with ABS lined trays. Despite having four tiers, the top is only 40.5 inches high for easier top tier access. Shipping Weight: 476 lbs. Measurements (LxWxH): 24β X 86β X 40.5β
All tiers fully lined with ABS for chip and rust resistance.
Hex head Dumbbell Racks
3170 Six Pair
3118 Ten Pair
3168 Three-Tier
Like all Legend dumbbell racks, the 3170 is fully welded, so there will never be loose bolts or assembly, but the ultimate in rigidity and strength. Durable ABS lined trays protect the finish.
Nothing but more 3x3 inch fully welded strength, supplemented by tough ABS wear guards and a beautifully applied powder coat finish. A much-needed staple for any free weight area.
Will comfortably handle 5lb - 90lb dumbbells in five lb. increments. Fully welded 3x3 inch tubing with ABS lined trays. Newly revised with a lower overall height for easier top tier access!
Shipping Weight: 193 lbs. Measurements (LxWxH): 24β X 46β X 29β
Shipping Weight: 220 lbs. Measurements (LxWxH): 24β X 86β X 32β
Shipping Weight: 338 lbs. Measurements (LxWxH): 24β X 86β X 38.5β
Pro STyle Dumbbell RAcks
3190 Six Pair
3169 Ten Pair
3191 Three-tier
6-pair dumbbell rack with individual cradles for round-headed dumbbells. Excellent size for tucking into a corner or for keeping the water fountain company. Fully welded assembly. No bolts. No weaknesses.
One solid piece of 3x3 inch steel to confidently bear the load of ten pairs of round-headed pro style dumbbells. Individual cradles keep things in place and protect the powder coat finish.
Get up to 15 pairs of round-headed dumbbells off the floor and onto this large rack. Individual rubber cradles keep things safe and orderly. Newly revised with a lower overall height for easier top tier access!
Shipping Weight: 320 lbs. Measurements (LxWxH): 24β X 54.5β X 29β
Shipping Weight: 302 lbs. Measurements (LxWxH): 24β X 97.5β X 32β
Shipping Weight: 428 lbs. Measurements (LxWxH): 24β X 96.5β X 41β
Kettlebell Racks
38
3245 Long Rack
3257 Short Rack
Fully welded construction provides the solid stability you need in a storage rack. Lined with rubber sheeting, the trays on this rack are ready to take a pounding.
Stop tucking your kettlebells underneath your dumbbell racks. Get them up off the floor and onto a fully welded frame with rubber sheet-lined trays.
Shipping Weight: 230 lbs. Measurements (LxWxH): 24β X 86β X 29β
Shipping Weight: 208 lbs. Measurements (LxWxH): 24β X 46β X 29β
orage ge Solutions Barbell & Plate storage
barbell storage
3174 Five Barbell
3149 Ten Barbell
Need a five bar barbell rack and canβt find it anywhere? Look no more. This is a great solution to conserve space and rack those overflow bars. Fully welded with durable wearguards on the frame uprights.
3x3 inch tubing welded into a single piece with frame-welded pegs for the ultimate in rigidity and a minimum in setup or maintenance. Accommodates 10 barbells, with frame and peg polymer wearguards.
Shipping Weight: 190 lbs. Measurements (LxWxH): 30β X 24β X 62β
Shipping Weight: 250 lbs. Measurements (LxWxH): 43β X 29β X 57β
3137 Olympic Bar Holder
Store six Olympic bars upright in an 18β x 22β footprint. Maximum storage in a minimized footprint. Silver Vein finish. Shipping Weight: 48 lbs. Measurements (LxWxH): 22β X 18β X 11β
plates & accessory storage
3126 A-Frame plateholder
3112 & 3193 plateholders
3173 plateholder/ organizer
A fully welded yet economical way to get plates off the floor and onto six pegs, all inside a 34x18 inch footprint. Pegs are 1-inch in diameter. Fully welded. Chipresistant Silver Vein finish.
Both feature a single-piece welded frame, chip-resistant Silver Vein finish, and an 18x18-inch footprint. Your choice is either steel rod hangers (3112) or chrome-plated Olympic pegs (3193).
A great addition to any weight room, organize your plates and bars on one convenient rack. Small footprint, maximum storage potential! Chipresistant Silver Vein finish!
Shipping Weight: 39 lbs. Measurements (LxWxH): 33β X 18β X 39β
Shipping Weight: 42 lbs. Measurements (LxWxH): 18β X 18β X 42β
Shipping Weight: 75lbs. Measurements (LxWxH): 28β X 26β X 42β
3313 Multi Storage rack
3163 horizontal bumper rack
3159 accessory rack
A fully welded mix of a horizontal bumper plate rack underneath a rubber-lined kettlebell rack, with chrome-plated plate storage, bar holders and a chalk bowl on the end. Weights and bar sold separately.
A portable solution to your plate storage needs. This rack will hold eight 45 lb. bumper plates in place as it is moved from station to station. Also available with wider spacing as model 3163-W. Chip-resistant Silver Vein.
Gather all of your training attachments and store them in one convenient location. Fully welded with ABS wearguards and UMHW peg surrounds. Foam rubber-lined top tray
Shipping Weight: 198 lbs. Measurements (LxWxH): 23β X 67β X 41β
Shipping Weight: 43 lbs. Measurements (LxWxH): 55β X 11β X 11β
Shipping Weight: 210 lbs. Measurements (LxWxH): 42β X 16β X 59β
Legend 39
Pin Select U pin select - upper body
906 Seated Row
901 Pec deck
If youβre in need of a stand-alone pin select back blaster, look no further than the 906 Seated Row. Like most Legend items, the frame is fully welded, so thereβs no assembly, less maintenance, and lots of rigidity.
Designed for bilateral and unilateral use. The adjustable seat encourages correct body alignment and the aluminum footplate allows for added stabilization.
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 630 lbs. Measurements (LxWxH): 97β X 29β X 89β
900 Chest Press
40
Weight Stack: 150 lb (opt. 200 lb, 250 lb, 300 lb) Shipping Weight: 496 lbs. Measurements (LxWxH): 57β X 43β X 76β
902 shoulder press
903 Lever Lat Pulldown
70-degree training targets mid- and upperchest muscles. Barbell and neutral handgrip positions for exercise variety. Foot-assist pre-stretch lever arm.
Multi-position grips that isolate the shoulder muscles, a counterbalanced lift arm that reduces the start weight to 15 lbs. Exercise position reduces rotator cuff torsion.
Frame is fully welded and is supplied with two-position grip handles, steel weight stack shroud, a comfy adjustable seat and fully upholstered knee pads.
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 562 lbs. Measurements (LxWxH): 55β X 52β X 74β
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 610 lbs. Measurements (LxWxH): 67β X 52β X 74β
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 605 lbs. Measurements (LxWxH): 71β X 50β X 74β
904 vertical row
905 lat pulldown
908 bicep curl
An adjustable seat puts you correctly in position, and the comfortable chest pad reduces lower back involvement. Multiple handgrip positions.
Dual thigh roller pads that adjust easily for proper user stability and comfort. A chromeplated revolving lat bar helps reduce wrist strain. Wearguards protect finish from bar.
Engineered cam delivers the correct resistance profile to properly train the biceps. Angled handles rotate for max comfort. Adjustable seat & self-aligning handle system.
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 580 lbs. Measurements (LxWxH): 59β X 44β X 74β
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 460 lbs. Measurements (LxWxH): 58β X 48β X 90β
Weight Stack: 150 lb (opt 200 lb, 250 lb, 300lb) Shipping Weight: 458 lbs. Measurements (LxWxH): 46β X 40β X 74β
Upper Body 910 tricep extension
943 neck machine
952 adjustable cable Column
Self-aligning handle accommodates a wide range of arm lengths through full-range movements. The adjustable seat is angled 10Β° to stabilize user during exercise.
Weight stack features 5-lb. increments. Work the neck from four different directions. With an adjustable seat and four handgrips, youβre always in the correct position.
Extremely flexible machine that allows lots of exercises in a small footprint. Slide the pulley/handle to the desired height on the chromed column. Laser-cut numbers.
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 500 lbs. Measurements (LxWxH): 38β X 34β X 74β
Weight Stack: 75lb (opt 100 lb) Shipping Weight: 394 lbs. Measurements (LxWxH): 50β X 30β X 58β
Weight Stack: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 496 lbs. Measurements (LxWxH): 37β X 45β X 90β
962 lateral raise
966 standing bicep
967 standing tricep
Great way to develop those hard-to-reach deltoids. Compact design provides much needed back support during the movement. No strain, all gain. Height adjustable seat.
Allows the freedom of movement your biceps crave! With a natural progression of movement and a small footprint, this machine is sure to satisfy.
Compact tricep machine that can really isolate those triceps. Watch the line form behind this machine as everyone works in a quick set. Supplied with rope handle.
Weight Stack: 150 lb (opt 200 lb) Shipping Weight: 562 lbs. Measurements (LxWxH): 43β X 28β X 48β
Weight Stack: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 510 lbs. Measurements (LxWxH): 34β X 39β X 78β
Weight Stack: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 510 lbs. Measurements (LxWxH): 34β X 39β X 88β
2008 model pictured
972 lying chest press
Allows the user to perform bench presses without the need for a spotter. The flat bench has a bent tube design with a center pull design for constant even resistance. Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 588 lbs. Measurements (LxWxH): 71β X 53β X 74β
990 unilateral shoulder press
991 unilateral chest press
You can select either arm, or both, either way you finish with a great converging motion. Starting weight is 15 lbs per arm. Space-conscious compact footprint.
An unilateral movement that converges in just the right spot. Use in an alternating fashion or together, you will love the results. Compact footprint, but big results.
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 544 lbs. Measurements (LxWxH): 55β X 42β X 74β
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 544 lbs. Measurements (LxWxH): 50β X 39β X 74β
Legend 41
PinLower SelectB pin select - lower body & core 914 supine leg press
One of the safest ways to maintain proper form while performing the squatting motion, this leg press has features that raise it above the competition. A frame with lots of welds but few bolts means that little will loosen over time and absolutely no frame flex during the exercise, and closed linear bearings gliding on 1.25-inch solid steel rods provide uncommon smoothness and less long term maintenance. Compare to the competition using plastic wheels on tubes. Weight Stack: 300 lb (opt 350 lb, 400 lb) Shipping Weight: 860 lbs. Measurements (LxWxH): 77β X 44β X 74β
907 low back
912 leg curl
A favorite of rehab facilities. Adjustable footplate encourages proper pivot alignment for correct lumbar erector extension. A seat belt is provided for additional stability.
Adjustable back support and soft handgrips help you lock yourself into place. Engineered cam delivers the precise load needed during the entire range of movement.
Thereβs plenty of machine right here. An innovative design, thick padding, compact footprint and an uncompromising commitment to detail make results a given.
Weight Stack: 300 lb (opt 350 lb, 400 lb) Shipping Weight: 596 lbs. Measurements (LxWxH): 43β X 34β X 74β
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 522 lbs. Measurements (LxWxH): 53β X 36β X 74β
Weight Stack: 150 lb (opt 200 lb, 250 lb, 300 lb) Shipping Weight: 478 lbs. Measurements (LxWxH): 60β X 35β X 74β
915 STanding Calf
970 standing leg curl
Features an aluminum nonskid footplate that provides a full-range of movement, a 300-lb. weight stack, a leveraged input lifting arm, thick 2-inch padding, and grips that promote proper exercise alignment.
The vertical orientation provides more constant gravity resistance to really hit the βpeakβ of the hamstrings. Think of it as concentration curls for the back of the legs! Since its initial release we have dialed in the cam on this unit to really take advantage of this concept.
Weight Stack: 300 lb (opt 350 lb, 400 lb) Shipping Weight: 600 lbs. Measurements (LxWxH): 53β X 26β X 78β
42
911 leg extension
Weight Stack: 150 lb Shipping Weight: 510 lbs. Measurements (LxWxH): 46β X 30β X 74β
Body & Core 916 total hip combo
Allows complete training through full range of motion of the hip joint muscles and their four main actions: flexion, extension, abduction and adduction. Hip joint muscles are often the most neglected muscles in athletic training, yet they are active participants in running, jumping and even throwing movements. Roller pad is adjustable for varying leg lengths, plus the starting position has nine different settings over a 240-degree range. An aluminum checker footplate provides sure footing, and the 16β long rubber hand grips give a firm support as you push to the next level. Weight Stack: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 575 lbs. Measurements (LxWxH): 55β X 27β X 70β
931 seated leg press
941 Ab crunch
947 glute press
Identical to the 914 Supine Press featured on the facing page, but with a 3-inch thick back pad that places lift pressure on the lumbar region instead of the shoulders.
Fully adjustable seat and starting position. This user-friendly design features a fullrange crunching movement made possible by sealed pillow block bearings.
Thick pad enables correct spinal alignment. Ergonomics encourage gluteal involvement in a curvilinear path without relying on axial hip alignment. Compact footprint.
Weight Stack: 300 lb (opt 350 lb, 400 lb) Shipping Weight: 855 lbs. Measurements (LxWxH): 73β X 43β X 74β
Weight Stack: 150 lb (opt 200 lb, 250 lb, 300 lb) Shipping Weight: 455 lbs. Measurements (LxWxH): 54β X 37β X 74β
Weight Stack: 150 lb (opt 200 lb, 250 lb, 300 lb) Shipping Weight: 500 lbs. Measurements (LxWxH): 44β X 36β X 74β
949 inner thigh
950 outer thigh
956 seated leg curl
Features include dual-postion chrome foot pegs, adjustable seat back, stabilizing grab handles and smooth actuation through aircraft-quality cable and composite pulleys.
Dual chrome-plated foot pegs provide proper positioning and reduce lateral knee torque. Elevated weight stack is easily accessible for drop sets.
Seated leg curls are noted for placing the effort along the βlong headβ of the hamstrings for good base strength development and superlative leg toning.
Weight Stack: 100 lb Shipping Weight: 600 lbs. Measurements (LxWxH): 50β X 60β X 74β
Weight Stack: 100 lb Shipping Weight: 600 lbs. Measurements (LxWxH): 50β X 60β X 74β
Weight Stack: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 510 lbs. Measurements (LxWxH): 55β X 36β X 74β
Legend 43
Pin Select Comb pin select - combo stations 971 pro series lat pulldown/low row combo
An excellent partner in performing back super sets, this machine allows you to switch from a low row to a lat pulldown without having to disconnect handles or switch positions. Just swap the knee rollers for the foot plates and youβre ready to go. Provided with a big 300lb. weight stack in 10lb. increments, the 971 is a member of our Pro Series line of heavy duty performers. Extended seat accommodates users of all statures and UMHW wearguards up top protect the powder coat finish from the wide lat bar in its resting position. Only two frame bolts, the rest is a hallmark of Legend rigidity. Weight Stack: 300 lb Shipping Weight: 686 lbs. Measurements (LxWxH): 100β X 29β X 96β
945 seated lat/low row combo Just like the 971 Pro Series Combo above, but without pulley reduction and a separate snap link and cable for the row mechanism. Long seat for short and tall users. Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 442 lbs. Measurements (LxWxH): 88β X 48β X 90β
942 rear delt/pec Fly combo
Featuring independent arm movements, pivoting arms that adjust to arm length, dual position hand grips that promote a more specific isolation, and a starting position that is adjustable over a 90 degree range, this machine is ready to hit your upper torso like nothing else. Just move two pop pins to switch between delts and pecs. Weight Stack: 150 lb (opt 200 lb, 250 lb, 300 lb) Shipping Weight: 412 lbs. Measurements (LxWxH): 44β X 55β X 76β
933 Dip/chin assist For a complete chin up and dip station, look no further than the 933. Features include: all welded construction, a multi-grip chin up bar and rounded dip handles. A 200 pound weight stack makes this piece accessible and useful to beginning users as well as seasoned athletes. Weight Stack: 200 lb (opt 250 lb, 300 lb)
Shipping Weight: 705 lbs. Measurements (LxWxH): 60β X 39β X 85β
44
946 standing bicep/tricep combo Develop both parts of the upper arm with this space-saving wonder. No need to switch handles or make new adjustments on your arms day during super sets. Just release the rope handle and pick up the rotating pull up bar. Weight Stack: 150 lb (opt 200 lb, 250 lb)
Shipping Weight: 410 lbs. Measurements (LxWxH): 34β X 39β X 84β
bo Stations 3228 pro series Seated Lat/Floor Row
With a larger weight stack of 300lbs. in 10lb. increments, a sophisticated design and heavy duty construction, this combo machine is one of only two pin select devices that we have certified for Pro Series classification. Straddle the seat for extra heavy pulldowns, or brace yourself against the footrests for crushing floor rows. Weight Stack: 300 lb Shipping Weight: 842 lbs. Measurements (LxWxH): 66β X 69β X 96β
918 Leg Extension/ leg curl
964 inner/ outer thigh
One machine that really works out the quads and the hamstrings from the same seated position with just one quick adjustment. Adjustable, effective and space efficient. The weight stack is user accessible from the exercise position. The movement is pure in both extension and curls. Expect nothing but the best from this machine with a dual personality.
Multiple starting positions for both the inner and outer thigh will accommodate users at all levels. Adjustable back pad, thick padding and dual foot pads provide unmatched comfort. Two pop pins and a swivel of the leg pads is all it takes to swith between abduction and adduction. Two-position foot pegs.
Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 555 lbs. Measurements (LxWxH): 48β X 36β X 74β
Weight Stack: 100 lb Shipping Weight: 460 lbs. Measurements (LxWxH): 50β X 60β X 74β
957 seated low back/ab combo
951 Hi/low pulley combo
There is much ado about core strength, and for good reason. Hit both the low back and abdominals in one space-saving machine. Upholstered roller pads and welded frame bring the quality. Two cushy grab handles, a large foot platform and a seat belt bring the safety and stability.
The compact footprint and free-standing style make location a no-brainer . . . any location works. The Cable Column operates at a 2:1 pull ratio for decreased inertia. The multi-function concept gives you many exercise options. The handles even rotate for different range-of motion requirements.
Weight Stack: 300 lb Shipping Weight: 600 lbs. Measurements (LxWxH): 53β X 34β X 74β
Weight Stack: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 480 lbs. Measurements (LxWxH): 37β X 45β X 93β
963 multi press This machine features the ability to perform a flat bench press, two incline press movements and a military press by adjusting the backrest to 30Β°, 45Β° and 75Β°. The press arm features five starting positions and two sets of handles for maximum workout capabilities. Weight Stack: 200 lb (opt 250 lb, 300 lb) Shipping Weight: 600 lbs. Measurements (LxWxH): 80β X 50β X 74β
Legend 45
Pin Select M pin select - multi stack
953 functional trainer
Among the ultimates in exercise versatility, functional trainers have long been a weight room staple. Legendβs variation on this theme is packed with value when compared to the competition. All the capability that dozens of ground-based, functional movement exercises can provide are here, backed up with a great price and a super rigid frame that only has 8 bolts. Features include wide and neutral grip pull-up bar, accessory hooks, aviation-grade cables, composite pulleys on high quality bearings, and chrome plated adjustment columns with laser cut numbers to indicate each of the 20 floor-to-top pulley positions. Dual weight stacks accommodate either single use or two simultaneous users. Supplied with a 53.5-inch knurled long bar and two nylon grip web handles. Weight Stacks: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 686 lbs. Measurements (LxWxH): 100β X 29β X 96β
If you like the idea of having a Functional Trainer combined with our popular Performance Series Half Cage, you might be interested in the ultra-versatile 3142-FT Functional Trainer Fusion Half Cage, found on page 13.
919 Cable Crossover With two 150-lb. steel weight stacks and upper and lower 180Β° swivel pulleys allow you to pull from high or low without making adjustments. Chrome plated handles, a multi-grip pull-up station and a ballet bar on each column complete the features. Weight Stacks: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 790 lbs. Measurements (LxWxH): 136β X 32β X 93β
954 Cable Crossover w/ Adjustable Pulleys The Adjustable Pulleys Cable Crossover is another number one candidate for versatility. The handle starting position goes from the ground to the ceiling in three-inch increments and works over a chrome-plated adjustment tube with laser etched numbers with a smooth movement. . Features two 23 position chrome adjustment columns, 4x2-inch tubing and an offset multi grip chin up bar. Weight Stacks: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 965 lbs. Measurements (LxWxH): 32β X 138β X 90β
46
Multi Stack pin select - multi stack
965 combo jungle
This monster unites four of our finest pin select combo machines and integrates them with a cable crossover. Fully welded uprights. Moving parts are supplemented by aircraft-quality cable, high durometer pulley wheels and durable pillow block bearings with grease fittings. Ballet bar and offset multi grip pull-up bar round out the highlights. Cable Crossover: Two 150 lb weight stacks with 2:1 reduction. Multi Press Combo: 200 lb weight stack. Leg Extension/Curl Combo: 200 lb weight stack. Lat Pulldown/Row Combo: 200 lb weight stack. Bicep/Tricep Combo: 150 lb weight stack. Multi Grip Pull-Up Bar: Weight stack: how much do you weigh? Weight stacks can be upgraded by 50 or 100 lbs. Weight Stacks: see above Shipping Weight: 2847 lbs. Measurements (LxWxH): 158β X 158β X 91β
958 Four stack jungle The multi stack unit of choice when space is a concern. Basically a shortened version of the Combo Jungle above, with a central weight stack tower that is flanked by a combo station at each corner. Ideal applications include hotels and apartment complexes. All weight stacks can be upgraded by 50 or 100 lbs. Weight Stacks: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 2300 lbs. Measurements (LxWxH): 146β X 115β X 90β
960 Cable Crossover Plus This piece features a fully adjustable cable crossover along with a seated row station and a lat pulldown station. Throw in a chin up bar and five people can train at the same time. Two weight stacks of 150 lbs. are supplied for the cable crossover with 2:1 pulley reduction. The seated row and lat pulldown each have 200 lb. stacks. Weight stacks can be upgraded by 50 or 100 lbs. Weight Stacks: see above Shipping Weight: 1778 lbs. Measurements (LxWxH): 113β X 153β X 93β
959 Eight stack jungle This is a training mecca all by itself. Eight weight stacks and eight training stations make this an excellent centerpiece for any training facility. Cable Crossover: two 150 lb. weight stacks with 2:1 reduction Two Lat Pulldowns: 200 lb. weight stacks Two Seated Rows: 200 lb. weight stacks Two Tricep Stations: 150 lb. weight stacks Chin Up Bar: how much do you weigh? .
Legend
Weight stacks can be upgraded by 50 or 100 lbs. Weight Stacks: 150 lb (opt 200 lb, 250 lb) Shipping Weight: 3200 lbs. Measurements (LxWxH): 142β X 207β X 91β
47
48
Product Specs Product Specifications
Frame Materials: All equipment is CAD drawn and machined to a minimum tolerance of +/- .030. Construction is primarily of 3β x 3β 11ga. square tubing, or 4β x 2β and 3β x 2β 11ga. rectangular tubing.
Frame Finish: Each piece of equipment is prepared both mechanically and chemically for powder-coating. This is an engineered powder that is scuff resistant and long wearing.
Padding and Upholstery: All padding foam has a density of 10 lbs. per cubic foot. Upholstery is 32 oz.
Naugahyde. All pads are top double-stitched. Support board corners are radiused and edges are chamfered on both top and bottom for comfort and durability.
Bearings: Non-friction roller bearings contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment.
Weight Transport: 3/16β diameter aircraft cable with a 7 x 19 construction and black nylon coating. The cable is rated at a breaking strength of 3100 lbs.
Pulleys: Pulleys are 4 1/2β diameter fiberglass-impregnated nylon with a precision fit cable groove and double sealed non-friction roller bearings.
Weight Plates: All Legend pin select equipment features solid steel weight stack plates with a black finish and
are located with a coiled self-storing cord to prevent pin removal or loss. Self aligning low friction sleeve bearings surround the guide rods on every weight stack plate.
Spring Suspension: Heavy duty springs are used under the weight stack to reduce shock and vibration stresses. Guide Rods: Guide rods are solid steel and hard chrome-plated to ensure quiet operation and low friction. Hand Grips: 45 durometer rubber hand grips are used for comfort, safety and durability.
Legend 49
Guarantee Rec The Legend Fitness Guarantee
Legend Fitness warrants to the original purchaser that Legend equipment will be free from defects in material and workmanship under normal use and service for the following periods and in the following respects:
Limited Lifetime Warranty: Structural welds and frames. Five Year Warranty: Bronze Bushings, Pillow Block Bearings and Pulley Wheels One Year Warranty: Cables, Weight Plates, Guide Rods, Sealed Roller Bearings and all other components not mentioned elsewhere in this warranty
Ninety Day Warranty: Upholstery and grips All warranty periods begin to run from the date of delivery to the original purchaser. The obligation of Legend under this warranty is limited to repairing or replacing warranted defective parts, as Legend may elect, at the Legend plant in Knoxville, Tennessee, without charge to purchaser for either parts or labor. Purchaser is responsible for all transportation and insurance costs on returned or replaced equipment to and from the Legend plant in Knoxville, Tennessee.
This limited warranty does not cover and no warranty is given with respect to: 1. Component parts not manufactured by Legend. 2. Products that are altered without the express, written consent of Legend. 3. Products purchased other than directly from Legend or through a Legend authorized dealer.
ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO ONE YEAR DURATION FROM THE DATE OF DELIVERY TO THE ORIGINAL PURCHASER. THE REMEDY OF REPAIR AND REPLACEMENT IS THE EXCLUSIVE AND SOLE REMEDY OF THE PURCHASER. LEGEND SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, DAMAGE OR LOSS OF OTHER PROPERTY OR EQUIPMENT AND LOST PROFITS OR REVENUE. No action for breach of this written limited warranty or an implied warranty shall be commenced more than one year after the accrual of the cause of action. This written limited warranty is the complete, final and exclusive agreement of the parties with respect to the quality or performance of the goods and any and all warranties and representations. No modifications of this limited warranty or waiver of its terms shall be binding on either party unless approved in writing by an authorized corporate officer of Legend.
50
cent Intsalls
Legend 51