Proper Ways to Have a Safe Sex Toys
Since the 3D printer has become widely accepted by most people around the world as a conventional machine in creating items that we usually buy in department stores, even couples have found delight with this printers as they can now have 3D printed sex toys.
An affordable and adaptable 3D printing allows couples to experiment on the traditional designs of sex today by adding some features based on their preferences during the design stage. And with the right material to be used in making the sex toys, the once sex fantasies and dream fetishes becomes a reality – with 3D sex toys.
However, in regards with 3D print sex toys, aside from the materials, the printer and the design, another thing we should put much attention is the sanitary of the sex toys (printed or not) we use in our genitalia. Understand that if this will not be properly cleaned, it will cause serious infection which is bacterial vaginosis, cystitis and other sexually transmitted diseases like Chlamydia, herpes and syphilis.
And contrary to the belief that 3D sex toys are not safe, apparently, there are ways to make it safer to use, and this can be done with Acrylonitrile butadiene styrene (ABS) plastic. This ABS is a popular substance that is used in printing 3D sex toys as the finishing touch where the sex toys are smoothened and pores are sealed with this substance.
This can be done either with a sander or chemical bath where several coats of silicone are applied as a conformal coating. With this, you are guaranteed that what you are using is a bacteria-free sex toy. But if you are not into permanent seals, you can do the alternative way which is covering your sex toys with a condom and throw it out after using.
When you’re going to wash your sex toys that are made of silicone, stainless steel or glass that is not motorized you can place it in boiling water for 5 to 8 minutes for a deep cleaning. But if you have a dishwasher at home you can run it in without soap since the hot steam will sterilize your sex toys inside. Once your sex toys are cleaned to perfection, it is best to dry it off with a clean paper towel and store your 3d print sex toys in a silk case to protect it from items where bacteria can dwell.
Resources: http://sexshop3d.com/store/ http://sami19.soup.io/post/568567832/What-No-OneTells-You-about-the
Thanks for reading!