2010 A Q U A L U N G
JOURNEY
We make equipment for people to experience the fun and adventure of scuba diving.
10
43.12 N 5.32 E
43.12 N 5.32 E
AQUALUNG.COM EN
AL-CATA2010_couverture.indd 1
24/12/09 9:03:08
COLORS You have special needs and requirements?
BY AQUA LUNG
Aqua Lung has decided to help you on your choice. You will find on this new catalogue some colored logos, they will help you to make an appropriated selection for your next diving gear.
TRAVEL
PHOTO
CENTER
Compact and lightweight
Dedicated regulators,
Durable and easy to
equipment, without
help the shooting.
service gears for intensive
sacrificing performance
Freedom of the field of
use without relinquishing
and comfort
vision.
performance or comfort
You will find products as:
You will find products as:
You will find products as:
• MIKRON
• KRONOS
• CALYPSO
• ZUMA
• KRONOS SUPREME
• SAFAGA
• BALI
• MISTRAL
• WAVE
• MAHE
AL-CATA2010_couverture.indd 2
24/12/09 9:03:10
JOURNEY
We dive for the experience. From the planning and anticipation, to setting foot on the boat, to the first breath, to the beauty and discovery of the deep blue. It’s an experience we never stop thinking about. It’s our passion. It’s why we were the first to create diving equipment over sixty years ago. And it’s why we continue to be the world’s leading designer and manufacturer of dive gear – with unmatched innovation driven by the passion and love of diving.
10
GET ON BOARD
THE ADVENTURE STARTS WITH AQUA LUNG 1.0 REGULATORS 2.0 TANKS & VALVES 3.0 B OUYANCY COMPENSATORS 4.0 MASKS/SNORKELS/FINS 5.0 SUITS - BOOTS/GLOVES 6.0 BAGS 7.0 ACCESSORIES 8.0 SPECS
VENTURE
HOW FAR WILL THE DIVE TAKE YOU?
JOURNEY
09
PRODUCT GUIDE
LEGEND SUPREME
The Legend Supreme is the cold water version of the Legend and can be identified by the “snowflake” laser-etched into the case. It is matched with the same Legend first stage as found on the other Legend models, and shares the same performance features as the Legend, plus the following: • Specifically adjusted to pass the stringent European Standards for coldwater regulator performance. • A mouthpiece lip shield for warmth in extreme cold. • Built-in heat exchangers.
FEATURES 1st stage: balanced diaphragm mechanism with dry chamber Maximum service pressure: 300 bar DIN version - 232 bar yoke version 4 outlets MP 3/8 UNF 2 outlets HP 7/16 UNF Medium Pressure LEGEND: 9.5 bar 6 0.5 bar Medium Pressure LEGEND SUPREME: 8.5 bar 6 0.5 bar Flow rate: 1500 l/min with HP = 200 bar Body: made of brass with chrome Protector: polyurethane Removable crown, spring: stainless steel Conical filter: bronze with nickel coating O-ring: EPDM
REGULATORS
LEGEND GLACIA
Designed for use under the most extreme conditions, the Legend Glacia offers greater resistance to freezing than any regulator Aqua Lung has ever produced. In addition, it boasts a breathing performance that is equivalent to that of a Legend Supreme.
2nd stage: Pneumatically balanced second stage Cracking effort LEGEND: between 2.5 to 3.5 mbar Cracking effort LEGEND SUPREME: between 3.3 to 4.3 mbar Venturi effect tuning Box bottom: made of A.B.S Cover: Polyurethane
1.0
Mouthpiece, exhaust valve, seat, diaphragm: silicone
Adjustable crown: made of brass with chrome MP hose: Length: 730 6 5 mm Yoke Legend weight: 1285 g DIN Legend weight: 1091 g
LEGEND OCTOPUS
4
The Legend Octopus is designed to keep your buddy safe and in luxury. • Pneumatically balanced second stage provides consistent ease of inhalation at any tank pressure. • Over-sized venturi lever is easy to reach and use during the dive, but is positioned to avoid entanglement. • For Legend series.
Yoke HP weight: 950 g DIN HP weight: 756 g 2nd stage weight: 175 g Certification: EN250 - 2000 regulator for cold water. Breathing Performances: Work of breathing (average) W = 0, 74 J/litre at: RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar. Work of breathing (average) W = 1,14 J/litre at: RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
PRODUCT GUIDE
ACD Auto-Closure Device (ACD) seals the regulator’s inlet fitting, both Yoke and DIN, as soon as the regulator is removed from the cylinder valve. •K eeps water and contaminants out of the regulator’s first stage. during rinsing and storage • Allows the first stage to maintain peak performance over time. • The first stage will retain its internal lubrication longer. • Makes the first stage safer for nitrox use.
Our top performer. With simplified adjustments, the Legend™ regulator series incorporates a proprietary over-balanced diaphragm first stage design, coupled with a high performance balanced second stage. REGULATORS
The new ACD feature coupled with the environmental dry chamber, results in a first stage that is completely sealed off from the environment.
LEGEND The over-balanced first stage achieves unprecedented performance by compensating for the denser air at depth. The balanced adjustable second stage reduces breathing resistance to near zero with a lightweight balanced valve seat designed to respond instantaneously to the slightest inhalation.
1.0
The Legend regulator series is the best performing regulator Aqua Lung has ever offered.
ACD din
ACD yoke 5
PRODUCT GUIDE
LEGEND LX SUPREME
The Legend LX Supreme is the cold-water version of the Legend LX. It is designated by the “snowflake” which is laser-etched into the case, and by the silver accent ring on the front. It has all the same features as the Legend LX and the following cold water features: • Specifically adjusted to pass the stringent European Standards for coldwater regulator performance. • A mouthpiece lip shield for warmth in extreme cold. • Built-in heat exchanger.
FEATURES 1st stage: balanced diaphragm mechanism with dry chamber Maximum service pressure: 300 bar DIN version - 232 bar yoke version 4 outlets MP 3/8 UNF 2 outlets HP 7/16 UNF Medium Pressure LEGEND LX: 9.5 bar 6 0.5 bar Medium Pressure LEGEND LX SUPREME: 8.5 bar 6 0.5 bar Flow rate: 1500 l/min with HP = 200 bar Body: made of brass with chrome Protector: polyurethane Removable crown, spring: stainless steel Conical filter: bronze with nickel coating O-ring: EPDM
REGULATORS
2nd stage: Pneumatically balanced second stage Cracking effort LEGEND LX: between 2.5 to 3.5 mbar Cracking effort LEGEND LX SUPREME: between 3.3 to 4.3 mbar Venturi effect tuning Box bottom: made of A.B.S Cover: Polyurethane Mouthpiece, exhaust valve, seat, diaphragm: silicone
1.0
Adjustable crown: made of brass with chrome MP hose: Length: 730 6 5 mm Yoke Legend weight: 1310 g DIN Legend weight: 1116 g Yoke HP weight: 950 g DIN HP weight: 756 g 2nd stage weight: 200 g Certification: EN250 - 2000 regulator for cold water. Breathing Performances: Work of breathing (average) W = 0, 74 J/litre for: RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar. Work of breathing (average) W = 1,14 J/litre for: RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
6
PRODUCT GUIDE
LEGEND LX The Legend LX is our top of the line fully adjustable regulator complete with an Auto Closure Device (ACD) feature that seals the inlet fitting as soon as the regulator is removed from the cylinder valve. REGULATORS
•E nvironmental dry chamber creates a first stage that is completely sealed, keeping water and contaminants out of the regulator’s first stage. •P neumatically balanced second stage makes this a superior breather at all depths and conditions.
1.0
•U ser adjustment knob allows you to be in full control of breathing effort by adjusting for currents, depth or even surface swimming.
7
PRODUCT GUIDE
LEGEND GLACIA REGULATORS
The Legend Glacia is the newest member of the Legend family of regulators. It has been designed for use under the most extreme conditions. The Legend Glacia offers a greater resistance to freezing than any regulator Aqua Lung has ever produced. In addition, it boasts a breathing performance that is equivalent to that of a Legend Supreme. •T he Legend Glacia is fitted with three heat exchangers: -T he first completely surrounds the first stage environmental dry chamber. -T he second is fitted to the medium pressure hose itself. -T he third is in the traditional position adjacent to the second stage casing.
1.0
8
PRODUCT GUIDE
G
FEATURES
A CI LA
GO
1st stage: balanced diaphragm mechanism with dry chamber
ITH: ES W
Maximum service pressure: 300 bar DIN version - 232 bar yoke version BLIZZARD PRO p 75
4 outlets MP 3/8 UNF 2 outlets HP 7/16 UNF Medium Pressure: 8.5 bar 6 0.5 bar Flow rate: 1500 l/min with HP = 200 bar
INTRUDER p 75
Body made of brass with satin chrome Protector: polyurethane Removable crown, spring: stainless steel Conical filter: bronze with nickel coating O-ring: EPDM 2nd stage: Pneumatically balanced second stage
REGULATORS
Cracking effort: between 3.3 to 4.3 mbar Venturi effect tuning Box bottom: made of A.B.S Cover: Anodized Aluminium WRECK REELS p 89
Mouthpiece, exhaust valve, seat, diaphragm: silicone Adjustable crown: made of brass with chrome
1.0
MP hose with thermal exchanger: Length: 730 6 5 mm Yoke Legend Glacia weight: 1411 g DIN Legend Glacia weight: 1217 g Yoke HP weight: 955 g DIN HP weight: 761 g 2nd stage weight: 236 g Certification: EN250 - 2000 regulator for cold water.
Breathing Performances: Work of breathing (average) W = 0.94 J/litre for: RMV: 62.5 l/min, depth: 50 m, HP = 50 bar.
9
PRODUCT GUIDE
TITAN LX REGULATORS
This beautifully redesigned Titan LX, while picking up exciting new features like Aqua Lung’s Auto-Closure Device (ACD), is actually lighter weight, making it travel friendly. The ease of breathing is rated superior on the ANSTI breathing machine. All this, along with an attractive mid-range price, makes the Titan LX a sure value. The Supreme cold water version is resistant to freezing when diving in waters colder than 50°F / 10°C.
1.0
TITAN LX SUPREME
10
PRODUCT GUIDE
TI T
FEATURES
A
N
LX
E GO
SW
1st stage: In-line balanced diaphragm mechanism
ITH:
Maximum service pressure: 300 bar DIN version - 232 bar yoke version BALANCE COMFORT p 72
4 outlets MP 3/8 UNF 1 outlet HP 7/16 UNF Medium Pressure Titan LX: 9.5 bar 6 0.5 bar
PRO LT p 28
Medium Pressure Titan LX Supreme: 8.5 bar 6 0.5 bar Flow rate: 1400 l/min with HP = 200 bar ICELAND COMFORT p 75
Body made of brass with satin chrome Removable crown, spring: stainless steel Conical filter: bronze with nickel coating O-ring: EPDM 2nd stage: pneumatically balanced second stage
REGULATORS
Cracking effort Titan LX: between 2 to 4 mbar Cracking effort Titan LX Supreme: between 3.3 to 4.3 mbar Venturi effect tuning Box bottom: made of A.B.S Cover: Polyurethane Mouthpiece, exhaust valve, seat, diaphragm: silicone
1.0
Adjustable crown: made of brass with chrome MP hose: Length: 730 6 5 mm EXPRESS p 59
Yoke Titan LX weight: 1105 g - Yoke Titan LX Supreme weight: 1191 g DIN Titan LX weight: 965 g - DIN Titan LX Supreme weight: 1035 g Yoke HP weight: 770 g - Yoke HP Supreme weight: 856 g DIN HP weight: 630 g - DIN HP Supreme weight: 700 g 2nd stage weight: 175 g Certification: EN250 - 2000 regulator for cold water.
Breathing Performances: Work of breathing (average) W = 0,74 J/litre at: RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar. Work of breathing (average) W = 1,41 J/litre at: RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
11
PRODUCT GUIDE
NEW FOR 10
TITAN
REGULATORS
This third generation benefits from more than 10 years of experience. The new Titan is lighter, more compact and out performs it predecessors. In addition to offering a quick and easy MP hose connection, it allows for right or left hand configuration.
1.0
TITAN SUPREME
12
NEW FOR 10
PRODUCT GUIDE
FEATURES
TI
N TA
GO
1st stage: In-line balanced diaphragm mechanism
ITH: ES W
Maximum service pressure: 300 bar DIN version - 232 bar yoke version BALANCE COMFORT p 72
4 outlets MP 3/8 UNF 1 outlet HP 7/16 UNF Medium Pressure Titan: 9.5 bar 6 0.5 bar
PRO LT p 28
Medium Pressure Titan Supreme: 9.5 bar 6 0.5 bar Flow rate: 1400 l/min with HP = 200 bar Body made of brass with satin chrome Removable crown, spring: stainless steel Conical filter: bronze with nickel coating O-ring: EPDM 2nd stage: Downstream demand valve
LOOK 2 p 33
REGULATORS
Cracking effort Titan: between 2.5 to 4 mbar Cracking effort Titan Supreme: between 2.5 to 4 mbar Venturi effect tuning No tool required to reach the internal second stage Box bottom: made of A.B.S Cover: Polyurethane Mouthpiece, exhaust valve, seat, diaphragm: silicone
1.0
Adjustable crown: Technopolymer SLINGSHOT p 57
MP hose: Length: 730 6 5 mm Yoke Titan weight: 1109 g DIN Titan weight: 969 g Yoke HP weight: 770 g DIN HP weight: 630 g 2nd stage weight: 179 g Certification: EN250 - 2000 regulator for cold water Breathing Performances: Work of breathing (average) W = 0,78 J/litre with: RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar. Work of breathing (average) W = 1,41 J/litre with: RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
13
PHOTOGRAPHERS
SHOOT THE SEA
PRODUCT GUIDE
Designed with the photographer in mind, Kronos offers innovative solutions to common frustrations found with traditional regulators. The asymmetric Side-X exhaust system gets the bubbles out of your field of view, while fine-tuning is simplified by combining the venturi control with the breathing resistance knob into one Dual Cam controller.
KRONOS REGULATORS
The Kronos Supreme is the coldwater version of the Kronos regulator above. It is ideally suited for water below 50°F / 10°C.
1.0
KRONOS SUPREME
This regulator, while offering a nostalgic appeal, incorporates all the developments and refinements of a modern regulator and allows today’s diving in complete safety. With its multiple MP and HP ports, the diver can connect the full range of peripheral elements: octopus, submersible pressure gauge, BC and dry suit inflators. The Mistral first stage can be supplied with either a 232 bar yoke fitting, a DIN 300 bar fitting or with Nitrox/O2 M26x2 to allow the full range of configuration. The Mistral, based on a well-known tried and tested Titan design, and will be easy to maintain in complete safety.
MISTRAL 15
PRODUCT GUIDE
MIKRON REGULATORS
Travel light. Pack performance. The smallest and lightest weight regulator on the market today. •W eighs in at just 26 oz. (din) and 31 oz. (yoke) for light-weight travel packing. •P erformance is not sacrificed by the regulator’s extreme compactness. •B alanced first and second stages produce exceptional breathing performance.
1.0
•C ompact size also makes the Mikron ideal for women and young adults.
MIKRON LADY
16
PRODUCT GUIDE
M I
BALI & MAHE p 65
KR
N O
GO
FEATURES 1st Stage: Balanced diaphragm regulator
WITH: ES
Working pressure: 300 bar DIN version - 232 bar yoke version 4 outlets MP 3/8 UNF
ZUMA p 36
1 outlet HP 7/16 UNF Medium Pressure: 9.5 bar 6 0.5 bar Flow: 1450 l/min with HP = 200 bar Body: Brass electroless nickel + chrome plating Removal crown, spring: stainless steel Flat filter: sintered bronze O-ring: EPDM 2nd Stage: balanced demand valve Cracking effort: 2.5 to 4 mbar
REGULATORS
Cracking effort adjustment Clipsable exhaust tee Case, exhaust tee, adjustment knob: A.B.S Front cover: Polyurethane Mouthpiece, exhaust valve, diaphragm: silicon BALANCE COMFORT p 73
Adjustable crown: Technopolymer PEARL p 35
1.0
MP Hose: Length: 730 6 5 mm Mikron yoke weight: 890 g Mikron Din weight: 740 g Yoke HP weight: 617 g DIN HP weight: 467 g 2nd stage weight: 138 g Certification: EN250 approved, water temperature > 10째C
Breathing Performances: Average Work of Breathing WoB = 1,1 J/litre, with a breathing rate equals to 62.5 l/min, at 50m deep and working pressure equals to 50 bars.
17
PRODUCT GUIDE
PARTNER
The new Partenr second stage is lighter, more compact and so successful than these predecessors. It offers you in addition a simple and fast connection of the MP hose but also the possibility of using it right or left hand. Excellent choice for equipping redundant pony bottles or safety stop cylinders.
FEATURES 1st stage: unbalanced piston regulator Maximum service pressure: 232 bar yoke version or Din version 4 outlets MP 3/8 UNF 1 outlet HP 7/16 UNF Medium Pressure: 9.5 bar Âą 0.5 bar with HP = 200bar Flow rate: 1300 l/min with HP = 200 bar Body made of brass with satin chrome Removable crown, spring: Stainless steel Conical filter: bronze with nickel coating O-rings: EPDM 2nd stage: Downstream demand valve Cracking effort: between 2,5 to 4 mbar
REGULATORS
CALYPSO NITROX
1.0
The Calypso O2 regulator has all the same features and benefits of the popular Calypso regulator, with the added bonus of being designed and built for use with breathing gasses containing oxygen percentages between 40 - 100%. The Calypso O2 is an excellent choice for technical divers in need of a shallow-water regulator capable of operating with a high O2 percentage. Assembled in a dedicated clean room to ensure suitability for higher oxygen percentage applications.
Venturi effect tuning No tool required to reach the internal second stage Box bottom: made of A.B.S Cover: Polyurethane Mouthpiece, Exhaust valve, seat, diaphragm: silicone Adjustable crown: Technopolymer MP hose: Length: 730 6 5 mm Yoke Calypso weight: 970 g Din Calypso weight: 739 g Yoke first stage: 628 g Din first stage: 397 g 2nd stage weight: 179 g Nitrox Compatibility: 40 % O2 max. with yoke or Din version, 100 % O2 with EN 144-3 version Certification: EN 250:2000 Regulator for cold water Breathing Performances: Work of breathing (average) W = 1.2 J/litre for: RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar.
18
PRODUCT GUIDE
NEW FOR 10
CALYPSO REGULATORS
• In-line, high-flow piston design. • High-performance, mid-size 2nd stage. • Vane Adjustment Switch (VAS) controls venturi assist to reduce sensitivity to freeflow on surface and provide maximum air flow at deeper depths. • Enlarged oral breathing channel with Comfo-Bite™ mouthpiece. • Now meets the CE requirements for cold water diving (<50º F). • New bright chrome finish.
1.0
19
PRODUCT GUIDE
NEW FOR 10
REGULATORS
Innovative, low profile design minimizes drag. • Unique 120˚ angle between hose and mouthpiece is ideal for sharing air with your buddy. • Includes high-visibility yellow, 39” hose. • Custom, quick release mounting clip included. • Single units come in display-ready clamshell packaging.
Mid-size octopus. • Vane Adjustment Switch (VAS) controls venturi’s sensitivity to free flow on surface and provide maximum air flow at deeper depths. • Enlarged oral breathing channel.
CALYPSO/TITAN OCTOPUS
ABS
1.0
Type: Balanced demand valve. • Mechanism: Down stream poppet. • Material: Silicone for mouthpiece, diaphragm and exhaust valve – ABS for box bottom – Polyurethane for purge cover. • Cold water: Yes. • Sensitivity adjustment: No. • Venturi adjustment: Yes. • Cracking effort: between 3,3 to 4,3.
OCTOPUS LX
20
All the features of the regulator Mikron in an octopus. • Balanced octopus. • Light. • Yellow second stage. • NEW: AQUAFLEX hose.
MIKRON OCTOPUS
PRODUCT GUIDE
The Kronos octopus is the perfect match for the Kronos regulator. • New asymmetrical Side-X exhaust system (pat. pend.) routes bubbles out of your viewing area. • Exhaled breath passes over the second stage valve effectively warming it, thereby making it resistant to freezing. • The venturi control and breathing resistance knob have been integrated into one Dual Cam controller (pat. pend.). Divers can now achieve ideal settings with less to think about. • This pneumatically-balanced octopus is ideally suited for all high performance regulators including over-balanced first stage.
KRONOS OCTOPUS
REGULATORS
Mid-size octopus to complete Legend LX, Legend & Titan LX regulators. • This pneumatically balanced octopus is ideally suited for an over-balanced Legend first stage. • The diver has full control of the venturi by means of a lever so as to prevent accidental freeflow when the octopus is not being used. • The excellent cold water performance of this octopus is due to the highly efficient heat exchanger on the second stage. • High visibility 39” yellow hose and high visibility yellow cover.
1.0
LEGEND OCTOPUS
If your extreme cold diving requires the Legend Glacia regulator, then this is the complimentary octopus that you need. • Fitted with an aluminum cover machined from solid metal. The metal cover, apart from assisting the heat exchange, accommodates a purge button with flow control. • Heat exchangers surrounding the valve and in the middle of the hose provide excellent freezing resistance. • Heat exchanger fitted in middle of 39” yellow hose. • NEW: A user adjustment knob allows you to be in full control of breathing effort. You can adjust for currents, depth or even surface swimming.
LEGEND GLACIA OCTOPUS 21
PRODUCT GUIDE
Z 230 bar Nitrox/O2 Valve All the features of a Z valve but with a M26 x 2 ISO connection (In accordance with the project of the EN 144-3).
TANKS & VALVES
•S pecially prepared in Aqua Lung’s workshops. • In accordance with the project of the EN 144-3. • Available in 6l 200 bar with Z valve, 10l 200 bar with Z valve and 12l 230 bar with T.A.G valve.
.A.G. 230 bar 02/Nitrox valve T All the features of a TAG valve but with a M26 x 2 ISO connection (In accordance with the project of the EN 144-3).
VALVES
2.0
NITROX TANK
•T o check the pressure in the cylinder. • Supplied with a screw purge. • Available with M26 x 2 ISO 300 bar (Nitrox/O2) connections.
PRESSURE TEST GAUGE 23
PRODUCT GUIDE
Aqua Lung tanks meet the EN250 standard as well as the new PED regulations that require manufacturers to certify a “tankregulator” set. Tanks sold in France are required to meet this regulation.
AIR TANK
TANKS & VALVES 2.0
Valve: One outlet valve 230 bar Z • Progressive opening action conserves the HP seat. • Soft handwheel absorbs shocks if the cylinder falls over. • Hexagonal body makes removal for inspection easier. • Z valve is available with M25x2 ISO or 3/4 NPSM (with or without burst disc) thread. The 3/4 NPSM model is not available in France. T.A.G. Valve: Patended 2 outlets • Assymetric heads for a perfect regulator positioning. • Simple and easy hose management. • Progressive opening action for the HP seat to last longer. • Soft handwheel absorbs shocks if the cylinder falls over. • Hexagonal body makes removal for inspection easier.
VALVES
24
PRODUCT GUIDE
•H P pressure gauge AL50. • Luminous, easy-to-read analog dials. • Reliable and accurate open bourdon tube mechanism.
MANO AL 50
• • • • •
he cylinder test pressure gauge. T Quick, easy way to check cylinder pressure. Rubber protective cover. Manual bleed screw. Available in yoke, DIN and M26 Nitrox connection for EEC. INSTRUMENTS
TANK TESTING PRESSURE GAUGE A complete range of combo gauges 2 elements in line: • 300 bars pressure gauge + Depth gauge. • Rubber protective cover. • Available metric & imperial.
2.0
2 elements in line + 1 on back: • 300 bars pressure gauge + Depth gauge. • Compass. • Rubber protective cover. • Available metric and imperial. •1 element in line + 1 on back: • 300 bars pressure gauge. • Compass. • Rubber protective cover. • Available metric and imperial.
ANALOG COMBO 27
PRODUCT GUIDE
PRO QD
The popular Pro QD BC, long considered the mainstay of the industry, acquired a new look and was updated with all the latest features including the patented SureLock™ II weight system. This latest revision now represents the best collection of features on the market for a mid-range BC. Not only does it provide value but it also offers unsurpassed comfort and durability.
FEATURES i3 TECHNOLOGY The intuitive i3™ will change the way you dive forever. With this innovative technology, a lever helps you control your buoyancy. It’s that simple. It’s diving made easier — take control of yourself. The Sea Quest i3™ is an innovative, new inflation system found exclusively in Sea Quest BCs. Its greatest asset is its simplicity and how intuitive it is to use. Move the lever up to inflate; down to deflate your jacket. What could be easier? What’s more, when dumping air from the BC, the i3 (patent pending) opens all of the Flat E-Valves at once. Gone are the days of deciding which valve to reach for based upon your orientation in the water. SAFE: The i3 (patent pending) allows you to take control of your diving. Mastering buoyancy control is one of the most difficult skills to learn. The i3 not only makes the skill easier but eliminates potential out-of-control-ascents caused by a diver reaching for the wrong dump valve. The i3 also allows for rapid location and activation of the inflator to establish buoyancy at the surface in case of an emergency. EASY: The i3 is simple and intuitive. Move the lever up to inflate; down to deflate your jacket.
PRO LT
REGULATORS BC’s
A new member of the “Pro” family for 2010 with a new backpack, additional features and upgraded cosmetics. It is a weight-integrated, jacket style. Those that dive with Pro LT will benefit from the quality and knowledge that Aqua Lung has developed in BC design and construction over the last four decades.
3.0 1.0
CONVENIENT: Unlike a traditional inflator at the end of a floppy hose, the i3 never moves. It is stationary at the same location where your left hand normally rests. It is always in the right place at the right time. RELIABLE: The i3 does not utilize pneumatics or hydraulics to activate the Flat E-Valves. Therefore, there is no possibility of failure due to leaks. Using push-rod technology, as found in aircraft, the design remains simple and robust. FUN: The i3 is just plain fun to use.
FEATURES PRO QD
PRO QD i3
The Pro QD was the first BC to incorporate i3 technology. For years, the Pro QD has been extremely popular for novice and exert diver alike. Now, with the addition of the i3 technology and a new fresh look, its popularity is sure to soar.
Two large lobe pockets are secured with #10 zippers. These are larger and stronger than previous #5 zippers. Zipper pulls are easy to grasp with gloves Features 6 stainless steeld-rings to attach accessories. The two upper d-rings are angled making them easy to attach items to Includes attachment grommets for knife. Has a pass-thru grommet for a retractor Adjustable waistband – new! Depth compensation on waistband - compresses at depth along with your wetsuit Lobe retaining D-rings allow you to hold lobe stationary with opposite hand while weight pockets are inserted Large pull bobs on dump valves Octo-pocket (patent pending) inside the right lobe Traction Pad over-molded on to the pack cradle prevents tank slippage Positioning strap allows you to set the Pro QD at the perfect height each time
28
PRODUCT GUIDE
SureLock II™ Weight System The best mechanical weight release system just got better! You used to have to insert a tab into the slot engage, which could be challenging while wearing a mask and gloves. Now the pocket aligns itself using a rail system. Just insert pocket until it clicks. You don’t even have to look! The male portion of the mechanism auto-finds the female portion. Now with improved single pull release. Simple and secure.
PRO QD REGULATORS BC’s
Our highly acclaimed best seller. This full featured mid-range BC continues our tradition of quality and innovation, with an attention to detail that makes it the choice of serious divers. •S ureLock II™ integrated weight system. •S wivel buckle system for unsurpassed fit. •O uter bladder construction of Armorshield™ Cordura® for increased wear and fade resistance.
3.0 1.0
29
PRODUCT GUIDE
NEW FOR 10
PRO LT
This weight-integrated, jacket style BC is the latest addition to the highly successful family of “Pro” BCs. BC’s 3.0
30
Those that dive with Pro LT will benefit from the quality and knowledge that Aqua Lung and Sea Quest have developed in BC design and construction over the last four decades. It packs features, style and durability into an affordable package.
PRODUCT GUIDE
P
FEATURES
RO
GO LT
Weight integration features the SureLock™II (patented) mechanical lock and release mechanism. The weight pockets align themselves. Just insert the pocket until it “clicks”. A simple, single-pull release is all that is needed to jettison the weights in an emergency
ITH: ES W BALANCE COMFORT p 72
TITAN p 12
A new, proprietary backpack has a built in traction pad to reduce tank slippage as well as a built in carrying handle Two large lobe pockets are secured with heavy-duty zippers complete with zipper pull tabs A scooped octo-pocket on the top front of the right lobe makes it easy to stow and deploy an octopus. The octopus remains visible and accessible throughout the dive Some divers may find it useful to run their instruments behind the left lobe pocket and out the scooped instrument pocket on the top front of the left lobe Features 4 stainless steel flat d-rings to attach accessories. Includes attachment grommets for knife The Pro LT has an adjustable waistband to accommodate varying waistlines Positioning strap allows you to set the Pro LT at the perfect height each time Right shoulder pull dump Lower right dump for head down orientation
BC’s
Chest strap for added security EXPRESS p 59
2 non-ditchable weight pockets on tank band Optional accessories include the Airsource, Squeeze lock knife and reflector kit Type of BC: ADV style, weight-integrated, wrap-around jacket Type of Fabrics: Outer bladder is fade resistant 500D Armor™ Cordura®. Inner bladder is 420D urethane coated nylon assorted fade resistant polyesters and mesh
3.0
Ditchable Weight: XS – ML hold up to 20 lbs. (9kg) - L & XL hold up to 32 lbs. (14.5 kg)
LOOK 2 p 55
Non-ditchable Trim Weight: All sizes hold up to 10 lbs. / 4.5 kg of weight in two pockets on rear tank band Lift Capacity (Lbs/N): XS-24/100, SM-27/120, MD-29/120, ML-33/140, LG-44/190, XL-55/240 Colors: Black / Charcoal / Red
New backpack
Octo-pocket 31
PRODUCT GUIDE
PRO QD i3 Top-of-the-line and with the latest technology, the Pro QD i3™ will change the way you dive forever. Its innovative design includes a one-touch lever that helps you simply and safely control your buoyancy. BC’s
•U pper and lower Flat E-Valves keep the BC streamlined while offering effective and responsive air dumping.
3.0
32
•S ureLock™ II mechanical weight release system (patented) offers unsurpassed ease of loading, ditching and security of weight pouches.
PRODUCT GUIDE
PR
O
Q
FEATURES PRO QD i3
D
&
i
O 3G
Integrated i3 (patent pending) technology for safer and easier control of inflation and deflation
WITH: ES
One upper and one lower Flat E-Valve keeps the BC streamlined while offering effective and responsive air dumping One-way valves prevent water from back flushing into the BC, greatly reducing captured water BALANCE COMFORT p 72
TITAN LX p 10
The oral inflator is easy to deploy and use. It can easily be removed to provide a access port should you ever need to rinse the inside of your BC SURELOCK™ mechanical weight release system (patented) offers unsurpassed ease of loading, ditching and security of weight pouches Two lobe-retaining D-rings that can be held to steady the lobe for easy weight pouch insertion Two 10lb weight pockets on sizes XS – ML. Two 16lb weight pockets on sizes L - XXL Two, side-release non-ditch pockets (except size extra small) increase overall weight carrying capacity as well as provide proper trim in the water A new, integrated Octo-pocket (patent pending), is a convenient way to secure your octopus A three-dimensional expanding gusset around the backpackTM provides increased lift capacity Outer bladder constructed of Armorshield™ Cordura® for increase wear and fade resistance Sculpted shoulders using the exlcusive Sea Quest swivel buckle systemTM provides unsurpassed fit and comfort
BC’s
Traction pad (patented) built into the proprietary contour back pack prevents cylinder slippage
EXPRESS p 59
Over-molded carrying handle makes carrying the BC a breeze. Standard on all sizes Upper, right-hand, shoulder pull dump as an alternative dumping method Six stainless steel D-rings to attach all of your accessories Two large zipper utility pockets with pull cord are easy to open / close
3.0
Knife grommets on left lobe accommodate any one of the fine Deep See knives Depth compensating waistband with 11/2 inch buckle and lobe strap LOOK 2 p 55 i3 TECHNOLOGY Intuitive design makes buoyancy control safer and easier Opens upper and lower dump valves simultaneously. No more thinking about which dump valve to reach for Over-molded lever prevents gloves from slipping off while using Increased flow rate over traditional inflators. Allows you to fill your BC faster Attached dust cap prevents contaminants from entering mechanism when not in use The i3 uses fewer parts and is easier to service compared to standard inflators Using the new LP hose grip, the LP hose can be attached or removed while wearing the BC. This will satisfy instructional agency requirements to disconnect and reattach LP hose while training 33
PRODUCT GUIDE
PEARL Our mid-level women’s BC is for real divers. The Pearl offers an adjustable waist band and a wide adjusting shoulder strap that allows you to fine-tune the fit to your body. It incorporates a plush back lining and Aqua Lung’s customary sports bra for added comfort and stability. • Features the new patented SureLock™ II mechanical weight release system. •H ybrid air cell combining the best features of a jacket style and a back inflation unit. • Sleek, low profile lobes with scalloped lower edges to rise above the hips.
BC’s
•F lat E-Valves reduce drag and keep the BC streamlined while one-way valves designed to keep water out.
3.0
The Pearl i3 is best ladies BC ever built by Aqua Lung. It features an all new air cell powered by Aqua Lung’s revolutionary i3 technology. The hybrid air cell combines a jacket style with a back inflation unit that completely surrounds the backpack. The front lobes are sleeker and low profile. The Pearl i3 retains Aqua Lung’s most notable BC features such as the integrated sports bra and SureLock™ II weight system.
PEARL i3 34
PRODUCT GUIDE
NEW FOR 10
WAVE BCâ&#x20AC;&#x2122;s
The Wave and Wave Jr. BCs have been completely redesigned for 2010. While they still retain their rugged, fade resistant materials, they have been refreshed with exciting new cosmetics and additional features.
3.0
35
PRODUCT GUIDE
NEW FOR 10
ZUMA
Here’s the BC that you have been waiting for. The fun, travel-friendly ZUMA will find favor with those divers who are tired of paying excess baggage fees. BC’s
This ultra-light, weight-integrated, back inflation BC has everything you need, yet lacks weight and bulk.
3.0
36
Once you lift it, you’ll feel for yourself that a size ML/LG weighs less than 2 kg (4.4 lbs), with the airway and weight pockets included!
PRODUCT GUIDE
BALI & MAHE p 65
ZU
M
A
GO
FEATURES Extremely lightweight
ITH: ES W
Size ML/LG weighs less than 2 kg (4.4 lbs) Great packability – flat or rolled Weight integration features the SureLock™II (patented) mechanical lock and release mechanism. The weight pockets align themselves. Just insert the pocket until it “clicks”. A simple, single-pull release is all that is needed to jettison the weights in an emergency.
MIKRON p 16
Innovative tank support system eliminates the need for a hard pack Lower tank band aligns with waist band A valve strap pulls the top of the cylinder in towards your center of gravity. This relieves the shoulders and transfers the load to the hips Only 4 sizes are all that’s needed to cover from XXS to XXL Adjustable chest strap The two buckles ride on a rail system allowing the strap to be raised or lowered. Proprietary flat e-valves mean less bulk Fold-down, easy-access pocket Features 4 D-rings to attach accessories.
BC’s
Includes attachment grommets for knife BALI & MAHE p 65
Right shoulder pull dump Lower right pull dump Sculpted padded shoulders Padded spine and lumbar support
3.0
Optional non-ditch weight pockets that mount on the tank band Other options include the Airsource, Squeeze lock knife and reflector kit
ZUMA BLUE
Type of BC: Light weight, weight-integrated, back-inflation unit Type of Fabrics: Air cell is made of 200D nylon. Ditchable Weight: All sizes hold up to 20 lbs. (9kg) Non-ditchable Trim Weight: Each pocket holds up to 5 lbs. / 2.25 kg of weight Lift Capacity (Lbs/N): XXS/XS – 22/90, SM/MD-22/90, ML/LG-34/150, XL/XXL-34/150
E-valve
SureLock II 37
PRODUCT GUIDE
BLACK DIAMOND Our technical do-it-all back inflation BC is designed for the serious diver. This rugged BC will take you over the edge while providing comfort for daily diving. • Constructed of rugged 840 denier nylon. • 5 large stainless steel D-ring attachment points (4 on size small). • Vertical adjustment chest strap to compensate for drysuit valves. (Shown with optional Air Source)
BC’s 3.0
Experience the unrestricted freedom of back inflation with the Balance BC. • Revolutionary triangular load distribution system in the shoulder strap, • offering exceptional comfort both underwater and on land. • Rear bladder with patented harness system for exceptional support • and load distribution. • Also available in Libra – designed specifically for women. (Shown with optional Air Source)
BALANCE
39
EQUIPPED
EXPLORE WITH CONFIDENCE
PRODUCT GUIDE
This 4-window close-to-the-eye frame design produces a mask with a low profile and an excellent view upwards and downwards. •S ide lens is made of an optical quality polymer and offers brighter vision. •C ardanic joint buckles (double joint buckles) rotate both up-and-down and in-and-out to provide maximum adaptability and comfort for any head shape. •Q uick counterposed push button activation is easy to use even when wearing gloves.
Lightweight single lens mask. • Wide field of vision. • Fast and simple strap adjustment system. • Hypoallergenic silicone skirt. • Tempered glass.
INFINITY
•O uter frame made of shock absorbent techno-polymer. •F olds down flat to fit into BC pockets.
MASKS
This solid, robust mask was created with technical divers in mind.
VENTURA
See the world clearly with the new Look 2 mask. • Easy pop-and-swap optical lens system. • Available in two sizes for a custom fit. • Great visibility.
4.0
TEKNIKA LOOK - LOOK 2
The Micromask is a revolution in mask design. Its innovative structure allows the lenses to fit seamlessly into your field of vision, while its patented cardanic double joint buckles rotate both up-and-down and in-and-out to provide maximum adaptability and comfort.
MICROMASK
With lenses that are positioned at an incline, this mask provides a wide angle of view upwards and downwards to make for an incredible field of vision. • Cardanic joint buckles (double joint buckles) rotate both up-and-down and inand-out to provide maximum adaptability and comfort for any head shape.
FAVOLA 43
PRODUCT GUIDE
Cost-conscience lightweight full-foot pocket fin that packs a lot of power. Made from thermoplastic material and provides extraordinary elasticity. The adjustable version is an excellent entry level and all around fin. • Flexible, lightweight blade provides an easy kick with ample power. • Anatomically shaped foot pockets enhance comfort and performance. • Extended heel pocket for additional support and power transmission.
CARAVELLE
FINS 4.0
This time-proven blade design features a unique blend of materials for increased flexibility and performance. • Anatomically shaped foot pocket enhances comfort and performance. • Extended heel pocket for additional support and power transmission.
BLADES 2 FLEX
Introducing the fin of the future. The innovative Slingshot has been engineered for effortless power and speed with unmatched comfort. • Mid-Foot Flex Joint: transfers the power from your entire leg to the blade relieving pressure from your toes and ankles. • Power Bands: releases energy with each stroke, adding power and momentum to your kick with less effort. • Three-Speed Gear Shift: customizes your speed-to-effort ratio to fit your specific dive conditions.
SLINGSHOT 44
PRODUCT GUIDE
Our classic full foot fin is excellent for snorkeling and scuba in warm water where booties are not needed. • Combination of polymer plastic for stability and rubber for flexibility. • Produces maximum thrust and lateral stability.
STRATOS
FINS 4.0
Using Slingshot technology, the elastic rubberized zone at the toe allows the fin’s blade to bend to the optimum angle and obtain positive thrust from the complete surface of the blade. •O nce loaded with energy on the power stroke, it will release the energy prior to the upstroke to provide an added boost of power. • Innovation that makes diving more comfortable, efficient and fun.
EXPRESS
45
PRODUCT GUIDE
BURAN SNORKELS
Large bore curved snorkel • Vent system over the tube reduces water splash-in. • Lower reservoir with two purge valves. • Flexothane tube is supple yet resistant. • Quick and simple mask keeper. • Comfo-bite silicone mouthpiece.
Innovative structure, completely in silicone! • The single-piece silicone body rotates at the hose joint, allowing positioning to be optimised. • Fitted with a “Comfo Bite” orthondontic mouthpiece. • Double exhaust valve for an easy discharge
AIR PURGE DRY
4.0
The reference in snorkel design. • Innovative two-valve system. • Upper annular valve directs most of the water out before it even reaches the mouthpiece. • Patented and replacable Comfo-bite • mouthpieces eliminate jaw fatigue.
IMPULSE 3 For the kids • Color: blue.
MIX JUNIOR 47
DISCOVER
SOMETHING DEEPER
PRODUCT GUIDE
NEW FOR 10
BALI & MAHE 3.5mm One-piece without hood • New V Lycra collar for more comfort. • Back zip. • Velcro zip tab. • Wrist seals in “glideskin” neoprene for easier dressing. • Twin needle flat stitch. 3.5mm Shorty
SUITS 5.0
51
PRODUCT GUIDE
Undersuit in 1mm neoprene • Interior in Glideskin Titanium.
SKIN SUIT
SUITS 6.0 5.0
KIDS
5.5mm 1 piece suit • Ankle zips. • Knee protectors.
SHARM
5.5mm 2 piece suit • Ankle zips. • Knee protectors.
FLIPPER 52
PRODUCT GUIDE
BERING One-piece 6.5mm suit with hood • Ultrastrech neoprene. • Ergonomic easy neck closure has 3 Velcro fasteners for more comfortable head movement. • Comfort panels at joints in ultra-stretch 5.5mm neoprene. • Self-purging hood. • Ankles, cuffs and face in “glideskin” limit water entry, tear-resistant. • Personalised knee protectors. • “G lock” closure limits water entry. • Can be used with Balance Comfort 5.5mm over-vest.
SUITS 5.0
2-piece 7mm suit • Jacket with integral zip. • Plush comfort red interior. • Ergonomic easy neck closure for more comfortable head movement. • Longjohn upper part in 5.5mm neoprene. • Comfort panels at joints in ultra-stretch 3mm neoprene. • Cuffs in “glideskin” limit water entry, tear-resistant. • Knee protectors. • Pre-shaped hood
HUDSON
55
SHARM FULL SUIT
JACKET SAFAGA
A 6mm one piece suit with 100% high density neoprene suit. • Pressure resistant type L neoprene • Wear and UV resistance jersey polyester • Front zip • Cuffs in “Glideskin”, limit entry water
SUITS
A 5.5mm over vest with hood. • Pressure resistant type L neoprene • Wear and UV resistance jersey polyester • Front zip • Cuffs in “Glideskin”, limit entry water
5.0
BORA BORA
56
4mm Shorty • Completely reversible suit – End of the drag to put the right way round. • Front zip with a reversible slider. • Twin needle flat stitch.
SA
PRODUCT GUIDE
A AG G
E GO
S WIT
H:
WAVE p 32 CALYPSO p 19
LOOK 2 p 55
PRODUCT GUIDE
NEW FOR 10
SAFAGA Modular suit comprising a 5.5mm, 6.5mm (SHARM II) or 7mm one-piece, an over vest (5.5mm) with hood and a Bora Bora shorty (used as an over vest with a separate hood).
OVER-VEST: • 5.5mm shorty over-vest with hood or the Bora Bora over vest without hood. • 5.5mm Separate hood.
SE P AR
AT E
SUITS
ONE PIECE SUITS: • 5.5 or 7mm one pieces suit without hood. • Back zip. • Cuffs in “glideskin” limit water entry. • Clip for attaching hood pre and post-dive on right thigh.
5.0
5 .5 O HO D 57
PRODUCT GUIDE
Ultra-soft 5mm neoprene flex panels at the arms.
CO M
FO
E GO RT
S WI
TH : TITAN p 72
PRO LT p 28
AN CE
Double seals on wrists and ankles, composed with a 2,5 mm ultrastrech “glideskin” and a 3,5mm (5.5 mm one piece suit) or 4.5 mm (7 mm one piece suit) with a zip closure.
JACKET WITHOUT HOOD
BALANCE
One piece suit: 5.5 or 7mm one pieces suit without hood, back “Glock” closure .
LOOK 2 p 33
B AL
FULL SUIT
SUITS
Over vest: 5.5mm over vest without hood in Ultrastrech neoprene. SLINGSHOT p 57
5.0
LOOK 2 p 33
EXPRESS p 59
JACKET WITH HOOD
Over vest: • 5.5mm Shorty without hood or 5mm shorty with attached hood. •U ltra-soft 3mm neoprene crotch comfort panel. Separate 5.5mm hood: With smooth bib and face seal and comfort panel on the neck.
58
MIKRON p 16
PEARL i3 p 35
PRODUCT GUIDE
COMFORT Modular suit comprising a 5.5 mm or 7 mm one-piece, an over vest (7mm) with or without hood and a separate hood. All in Ultrastrech Neoprene. One piece suit: 5.5 or 7mm one pieces suit without hood, back “G lock” closure.
SUITS
Double seals on wrists and ankles, composed with a 2,5 mm ultra-strech “glideskin” and a 3.5mm (5.5 mm one piece suit) or 4.5 mm (7 mm one piece suit) with a zip closure. Ultra-soft 5mm neoprene flex panels at the arms.
5.0
SE P AR
AT E
5 .5 O HO D 59
PRODUCT GUIDE
7mm neoprene, includes separate hood. SPORTS DIVING DRY SUIT. •S wivel inflator, manual and automatic purge on the left arm. • 4mm ultra soft boots with soles in reinforced with vulcanised rubber. • Double smoothkskin cuffs 4mm “glideskin” neoprene. • Clip for attaching hood pre and postdive. • Waterproof metal YKK zip, protected by a cover. • Supplied with carrying bag. SUITS
BLIZZARD
5.0
•F ront zip •C ompressed 3 mm neoprene. • I nternal straps facilitating wearing of the suit before the dive. •H igh resistance kevlar knee pad. •M ultiple pockets. •S eparated hood. •L atex neck seal. •A utomatic low profile purge.
INTRUDER 60
Yamamoto compressed 4mm neoprene, includes separate hood • Swivel inflator, manual and automatic purge on the left arm. • Reinforced boots. • Sleeves fitted with latex cuffs, protected by a neoprene cuff. • Latex neck seal, protected by a neoprene collar. • Technical knee protectors. • Clip for attaching hood pre and postdive. • Supplied with carrying bag. • Waterproof metal YKK zip. • Internal straps facilitating wearing of the suit before the dive.
BLIZZARD PRO
PRODUCT GUIDE
Semi-dry 7mm suit, separated hood • • • •
Plush comfort red interior. Comfort panels at joints in ultra-stretch 7mm neoprene. Self-purging hood with smooth-skin around the face. Ankles, cuffs and face in 5mm “glideskin” limit water entry, tear-resistant. • Pocket on right leg with clip for attaching hood pre and post-dive. • Waterproof plastic Tizip zip, protected by a cover.
ICELAND COMFORT
SUITS 5.0
Semy-dry 7mm suit with attached hood •P lush comfort red interior • Comfort panels at joints in ultra-stretch 7mm neoprene • Self-purging hood. • Ankles, cuffs and face in 5mm “glideskin” limit water entry, and is tear-resistant. • Pocket on right leg. • Waterproof metal YKK zip, protected by a cover.
ICELAND 61
PRODUCT GUIDE
• • • • • • • • • •
0% nylon - 40% polyester. 6 Padding: 3M Thinsulate. Lining: 100% nylon. Made from Thinsulate to avoid heat loss. Lined interior. Ventilation grilles at armholes. Front zip. Elastic arms and legs. Unisex. Ideal for wearing under a high volume dry suit.
UNDER-SUITS ARCTIC 100 & 300
TITANIUM
SUITS
Shorty in 2mm neoprene • Inside lined with Titanium glideskin. • Used with a dry or wet suit. • Unisex suit.
5.0
Remember the fun not the burn. • 50+ UPF (SPF) rating. • Lycra blend of 80% nylon / 20% spandex. • All available in long or short sleeve.
RASHGUARDS 63
PRODUCT GUIDE
Available in 5mm or 6.5mm. • Flexible vulcanised rubber sole with 8mm inside for comfort. • Flexible rubber toe & heel caps guard against abrasion. • Plush linning. • Built in strap stop.
POLAR BOOTS & GLOVES
3mm boots. Dry gloves 4mm.
BOOTS
5.0
DRY COMFORT
An ergonomically designed glove that has pre-curved fingers that help minimize hand fatigue. 2mm ultra stretch neoprene for exceptional comfort. • Reinforced polysuede palm. • Molded pull-on entry tab.
POLYSUEDE KAI
• Available in 3 or 5mm standard neoprene. • Rubberized coating on palm for durability & added grip. • Adjustable cinch closure at wrist for a secure fit.
Thermocline 65
PRODUCT GUIDE
• • • • •
PVC coated 1200 Decitex Nylon. Measurements: 78 cm x 40 cm x 35 cm. Weight: 2 kg. Volume: 95 litres. Two carrying handles and shoulder strap. • One exterior pocket. • One fin pocket.
CLASSIC BAG
BAGS
NEW FOR 10
• • • • • • •
Dimensions: 35 cm x 25 cm x 10 cm. Capacity: 9 liters. Total Weight: 0.2 kg. 840D & 600D nylon and foam padding. Padded carry handle. Interior mesh O-ring/tool pocket. 2 Velcro loops for securing instruments in place.
6.0
TRAVELER 70-REGULATOR BAG
• • • • • •
ag made with tarpolin. B Dim.: 85 cm x 35 cm x 45 cm. Volume: 130 litres. 2 handles and shoulder strap. 2 screwed valves. U-shape for the opening.
TRAVELER DRY
66
PRODUCT GUIDE
NEW FOR 10
NEW FOR 10
NEW FOR 10
BAGS 6.0
• • • • • • • • • • • • • • •
Dimensions: 48 cm x 78 cm x 40 cm. Capacity: 147 liters. Total Weight: 4.7 kg. 840D & 600D nylon. Lightweight corrugated board construction. Lightweight aluminum extendable handle. Smooth rolling ball-bearing wheels. Zippered pocket for hide-away padded backpack straps. Padded top and side carry handles. Molded plastic bottom handle. Internal fin pockets. External ID pocket. Custom molded zipper pulls. Internal compression straps. Removable accessory bag strap.
TRAVELER 1600
• Dimensions: 48 cm x 78 cm x 30 cm. • Capacity: 116 liters. • Total Weight: 4.4 kg. • Meets max. checked luggage size for most airlines. • 840D & 600D nylon. • Lightweight corrugated board construction. • Lightweight aluminum extendable handle. • Smooth rolling ball-bearing wheelsy. • Zippered pocket for hide-away padded backpack straps. • Padded top and side carry handles. • Molded plastic bottom handle. • Internal fin pockets. • Removable accessory bag strap. • External ID pocket. • Internal compression straps. • Custom molded zipper pulls.
TRAVELER 1550
• • • • • • • • • • • •
Dimensions: 35 cm x 78 cm x 35 cm. Capacity: 100 liters. Total Weight: 3.7 kg. 840D & 600D nylon. Lightweight corrugated board construction. Smooth rolling ball-bearing wheels. Velcro closure duffle handle. Molded plastic bottom handle. Internal fin pockets. External ID pocket. Custom molded zipper pulls. Lightweight aluminum extendable handle.
TRAVELER 850 67
PRODUCT GUIDE
• • • • • • • • • • • •
Dimensions: 33 cm x 76 cm x 30 cm. Capacity: 77 liters. Total Weight: 1.0 kg. 840D & 600D nylon. Adjustable padded backpack straps. Velcro closure duffle handle. Internal compression straps for fins. D-rings for optional shoulder strap (sold separately). Dive gear check list. Zippered external accessory pocket. Padded end carry handles. Zippered end pocket with mesh vents that fits the Traveler 70 Regulator Bag. • Padded bottom with drain grommets.
NEW FOR 10
NEW FOR 10
TRAVELER 450 Dimensions: 33 cm x 66 cm x 33 cm. Capacity: 72 liters. Total Weight: 0.4 kg. 840D & 600D nylon and PVC-free nylon mesh. D-rings for optional shoulder strap (sold separately). External zippered accessory pocket. Velcro closure duffle handle.
BAGS
• • • • • • •
NEW FOR 10
6.0
TRAVELER 350 NEW FOR 10
• • • • • • • • • •
imensions: 36 cm x 71 cm x 38 cm. D Capacity: 81 liters. Total Weight: 0.5 kg. 840D & 600D nylon and PVC-free nylon mesh. Ergonomic adjustable padded backpack straps with integrated top carry handle. Full length side zipper entry. Internal zippered accessory pocket. External zippered bellows pocket. Dual cinch closure top with a top flap. Mesh/nylon hybrid bottom for drainage away from clothing.
TRAVELER 250
• • • • • • • •
Dimensions: 31 cm x 43 cm x 16 cm. Capacity: 23 liters. Total Weight: 0.6 kg. 840D & 600D nylon. Zippered plush lined sunglass/mp3 player pocket. Internal laptop pocket with Velcro securing strap. Internal document pocket. Ergonomic adjustable padded backpack straps with integrated top carry handle. • Mesh water bottle pocket. • External zippered accessory pocket. • Breathable mesh back panel.
TRAVELER 100 69
NEW FOR 10
Without a doubt the most unique dive torch available at the moment: adjustable power 100%, 50% and strobe mode. • It runs on only two C-Alkaline cells. • Ø = 50mm L = 220mm • Aluminim head. • LED 3W/25W at 6° - 6500 kelvin.
MULTI-LIGHT
•R echargeable dive light in aluminium housing. • Standard 20 watt bulb gives 30 minutes burn time. • Retractable 2-position handle with Elastomer grip. • Length 180mm, diameter 70mm. • Double O-ring for improved watertightness.
ALULIGHT 20
•3 5 minutes burn time at full power 6V. • Recharges completely in 5 hours. • Very compact: diam. 70 mm, length 170 mm. • The ON/OFF switch and power control are on the handle.
ALULIGHT 35
PRODUCT GUIDE
• R echargeable dive light in aluminium housing with NiMH battery pack. •T wo power selection possibility. •S tandard 50 watt bulb gives 50 minutes burn time. •S witch with “Warning” position. •E lectronic circuit, checks and monitors the functioning of each element. •R etractable 2-position handle with Elastomer grip. •L ength 220 mm, diameter 80 mm.
ALULIGHT 50
TORCHES
•B ody: Material Partially rubberrized Thermoplastic. •B atteries: 6 C size elements. •P ower: Comparable to more than 50 watts. •C olour temperature: More than 6000 K. •D uration: More than 6 hours. •D imensions: 60 x 235 mm. •O perational depth: 120 m. •S witch: Mecanical sliding. •S afety: Lock Yes.
•S imple and ergonomic. • 4 and 6 cell models. • Compact lamp providing 6 hours of optimum illumination. • Thumb-operated switch. • Beam adjusted by turning front cap.
7.0
LUMEN X4 & LUMEN X6
LUMEN LED
•B ack-up and signal lamp at one end. •P owerful strobe signal light at the other. •S upplied with adjustable lanyard. •O ptional Velcro strap available.
• • • • •
agnetic switch. M Uses 4 or 8 AA cells. Tempered glass lens. Faceted reflector. Halogen bulb (3300°K).
QUARTZ
COMBIFLASH 71
PRODUCT GUIDE
• 2 sizes of blade. • 1 cutting edge and 1 saw edge. • Metallic butt.
AQUA LUNG CISORS
KNIVES
• • • • • Small compact knife. • Released from sheath by squeezing the handle. • Can be screwed on BC or worn with standard straps.
7.0
different blade designs. 2 Made from marine grade stainless steel. Easy grip 2 layer handle. Simple non-mechanical sheath locking system. • Sheath straps have quick-release buckles.
DIABLO
SQUEEZE
•M id size knife. • 1 cutting edge and 1 saw edge. • Rubber strap with quick release buckle.
ZAK 72
• • • •
Small knive. 1 cutting edge and 1 saw edge. Designed as a dedicated BC knife. Supplied for leg, BC or hose mounting.
ZAK ALPHA
PRODUCT GUIDE
•C arried by diver and released for deco stops. • Height 1.2m, volume 16 litres. • Weighted lower opening. • Fitted with 12m of line and carried in a pocket retained by a snap hook.
DELAYED SURFACE MARKER BUOY
ACCESSORIES
•M arks diver’s position at the surface. • Round or torpedo shaped. • Orange colour.
SURFACE MARKER BUOY
• • • •
ade in Polyurethane. M Includes a inverted ducksbill valve. Weighted lower opening. Fitted with 12m of line and carried in a pocket retained by a snap hook.
TECH DECO STOP BUOY
7.0
•A luminum body and hard anodization with yellow nylon rope. • Adjustable brake with Stopper. • 2 length of rope 85m et 45m.
APEKS WRECK REELS
•O ld by velcro and elastic. • 3 pages. • Supply with a pencil.
Aqua Lung belt • Nylon webbing. • Kam buckle for easy belt length adjustment. Soft belt • Pocket belt. • Easily accepts shot pouches or standard weights. • Available in 4 sizes.
BELTS
APEKS WRIST SLATES 73
2010
REGULATORS
MIKRON LEGEND GLACIA
LEGEND LX SUPREME
LEGEND LX
LEGEND SUPREME
LEGEND
KRONOS SUPREME
(ALSO IN WOMENS)
KRONOS
FIRST STAGE Over-balanced diaphragm for superior performance
l
l
l
l
l
l
Balanced diaphragm
l
l
High flow in-line piston Automatic Closure Device (ACD) seals out water from the first stage inlet
l
l
l
l
l
l
l
Optional
Integrated “Air Turbo System” to boost breathing performance
l
l
l
l
l
l
l
l
# of Medium Pressure / High Pressure ports
4/2
4/2
4/2
4/2
4/2
4/2
4/2
4/1
Din connector available
300
300
300
300
300
300
300
300
l
l
l
l
l
l
l
l
Pneumatically balanced for effortless inhalation
l
l
l
l
l
l
l
l
Inhalation adjustment feature to control breathing effort
l
l
l
l
l
l
l
l
Venturi Adjustment Switch to control air flow
l
l
l
l
l
l
l
Comfo Bite mouthpiece eliminates jaw fatigue
l
l
l
l
l
l
l
Environmentally sealed to reduce freezing and keep mechanism clean and dry
l
l
Heat exchanger
l
l
Lip shield for added warmth
l
l
Nitrox compatible up to 40% out of the box. Out of Europe only.
SECOND STAGE
COLDWATER FEATURES
74
l
l
l l
l
l
l l
l
2010
OCTOPUS
LEGEND OCTOPUS TITAN LX SUPREME
NEW
TITAN LX
TITAN SUPREME
NEW
TITAN
NEW
CALYPSO
l l
l
LEGEND GLACIA OCTOPUS
l l
l
l
Optional
Optional
l
l
l
l
4/1
4/1
4/1
4/1
4/1
300
300
300
300
200
l
l
l
l
l
MIKRON OCTOPUS
SPECS
KRONOS OCTOPUS
8.0
l
l
l
l
l
l
l
l
l
l
l
l
l
l l
TITAN LX OCTOPUS
l
l
ABS OCTOPUS
CALYPSO/TITAN OCTOPUS
l l NEW
75
2010
BUOYANCY COMPENSATORS
PRO QD
PRO LT
PRO QDi3
WAVE
ZUMA
Our most popular all-roung jacket style BC. The perfect blend of function and durability.
This weight-integrated, jacket style BC is the latest addition to the highly successful family of “Pro” BCs.
The best of the Pro QD family. This model sports integrated i3 inflation technology along with low profile flat e-valves.
A rugged, fade-resistant, jacketstyle, entry-level BC. If you like to wear your weight on a belt, then this is a good choice for you.
This ultra-light, weightintegrated, back inflation BC has everything you need, yet lacks weight and bulk.
BC Type
Jacket Style
Jacket Style
Jacket Style
Jacket Style
Back Inflation
Releasable Weight
Two SureLock pockets Size XS-ML - 4.5 kg Size L - XXL - 7 kg
Two SureLock pockets Size XS-ML - 4.5 kg Size L - XXL - 7 kg
Two SureLock pockets Size XS-ML - 4.5 kg Size L - XXL - 7 kg
Not weight integrated except size XXS which holds a total of 5.5 kg with hook and loop closures
Two SureLock pockets 4.5 kg each
Non-releasable Weight
XS = none S = 3.5 kg M - L = 4.5 kg
XS = none S = 3.5 kg M - L = 4.5 kg
XS = none S = 3.5 kg M - L = 4.5 kg
None
All sizes = 4.5 kg
Waistband
Non-adjustable Depth compensating
Non-adjustable Depth compensating
Non-adjustable Depth compensating
Adjustable
Adjustable
Pockets
2 zippered pockets
2 zippered pockets
2 zippered pockets
2 large, hook & loop pockets
Fold down, easy-access pocket
Octo-pockets
0
2 new style of Octo-pocket
1 (right)
1 (right)
0
D-rings
6 stainless (2 of them are angled)
4 stainless
5 stainless (2 of them are angled)
2 stainless
4 plastic
Dump Valves
2 std valves
2 std valves
2 flat e-valves
1 std valve + 1 lower valve
2 flat e-valve
Sizes/Lift Capacity/Volume Size | lbs | Liters (lbs/Liters) XS 27 12 SM 30 13 MD 35 15 ML 38 17 LG 47 21 XL 61 27 XXL 61 27
Size | lbs | Liters XS 24 10 SM 27 12 MD 29 13 ML 33 15 LG 44 20
Size | lbs | Liters XS 27 12 SM 30 13 MD 35 15 ML 38 17 LG 47 21 XL 61 27 XXL 61 27
Size | lbs | Liters XXS 18 8 XS 26 11 SM 29 13 MD 37 16 ML 37 16 LG 41 18 XL 49 22
Size | lbs | Liters XXS 22 10 XS 22 10 SM 22 10 MD 22 10 ML 34 15 LG 34 15 XL/XXL34 15
Colors
Black / Red
Black / Red
Black
Green Grey / Blue Grey
76
Black / Silver / Blue
BALANCE
PEARL
PEARL i3
LIBRA
This rugged back-inflation BC bridges the gap between recreational and technical diving. It offers plenty of pockets and D-rings.
The most popular backinflation BC in our lineup. The patented harness innovations provide maximum comfort.
A ladies BC that combines superior fit, comfort and cosmetics with a traditional inflation system.
A feature-rich ladies BC using integrated i3 inflation. Comfort, function, looks this BC has it all.
A specially patterned ladies version of the Balance BC. Pressure points have been removed for maximum comfort.
Back Inflation
Back Inflation
Jacket / Back Inflation Hybrid
Jacket / Back Inflation Hybrid
Back Inflation
Two SureLock pockets 7 kg each
Two SureLock pockets 4.5 kg each
Two SureLock pockets 4.5 kg each
Two SureLock pockets 4.5 kg each
Two SureLock pockets 4.5 kg each
All sizes = 4.5 kg
XS = none S = 3 kg M - L = 4.5 kg
XS = none S = 3 kg M - L = 4.5 kg
XS = none S = 3 kg M - L = 4.5 kg
XS = none S = 3 kg M - L = 4.5 kg
Adjustable
Adjustable Depth Compensating
Adjustable
Adjustable using Multisetâ&#x201E;˘
Adjustable Depth Compensating
2 zippered, 1 fold-down
2 zippered pockets
2 zippered pockets
2 zippered pockets
2 zippered pockets
0
0
2
2
0
5 large, angled stainless (4 on size small)
3 angled stainless
4 plastic
4 stainless
2 angled stainless
3 std valves
2 std valves
2 flat e-valves
2 flat e-valves
2 std valves
Size | lbs | Liters SM 50 22 MD 50 22 ML 50 22 LG 50 22 XL 50 22
Size | lbs | Liters SM 30 13 MD 36 16 ML 36 16 LG 40 18 XL 50 22
Size | lbs | Liters XS 24 11 M 24 11 SM 28 12 MD 33 15 ML 37 16 LG 44 20
Size | lbs | Liters XS 22 10 M 22 10 SM 29.5 13 MD 33 15 ML 38.5 17 LG 43 19
Size | lbs | Liters S 30 13 M 30 13 MD 36 16 ML 36 16 LG 40 18 XL 50 22
Black
Red / Silver
Black / Pink
Black / Pink
Black / Silver
SPECS
BLACK DIAMOND
8.0
77
2010
SHARM
FLIPPER
MAHE
BALI
BORA BORA
HUDSON
BALANCE COMFORT
5.5mm 1 piece suit
5.5mm 2 pieces suit
5.5mm shorty
5.5mm 1 piece suit
4mm shorty
7mm 2 pieces suit
BERING
WETSUITS
5.5 or 7mm 1 piece suit
MEN’S SIZES
78
USUAL SIZES
46
48
50
52
54
56
58
AQUA LUNG SIZES
XS
S
M
ML
L
XL
XXL
PARTS TO MEASURE
1
2
3
4
5
6
7
HEIGHT
155-166 163-169 166-175 172-181
178-187
184-190 190…
WEIGHT (kg)
47-63
54-70
61-79
70-89
80-97
88-107
96.…
HIP CIRCUMFERENCE
85
92
96
101
107
120
125
WAIST CIRCUMFERENCE
76
81
86
89
96
101
106
CHEST CIRCUMFERENCE
86
90
95
97
102
110
115
(B) NECK TO WRIST
72
75
78
80
85
88
92
WRIST CIRCUMFERENCE
16
17
18
19
20
22
23
ANKLE CIRCUMFERENCE
21
22
22
24
26
28
29
CALF CIRCUMFERENCE
32
33
33
34
35
38
40
(F) CROTCH TO ANKLE
65
68
71
73
75
78
80
(B) NECK TO ANKLE
128
134
139
143
148
155
160
BICEP CIRCUMFERENCE
27
29
30
32
34
37
40
HEAD CIRCUMFERENCE
53
55
57
59
61
63
64
FOREHEAD TO NAPE
45
45
46
47
48
49
50
Min tolerance + - 4 + - 3 + - 5 + - 5 + - 5 + - 2 -+ 1 + - 1 + - 1 + - 1.5 + - 3 + - 1 + - 2 + - 2
5.5 mm jacket without hood
5.5 mm jacket with hood
6.5mm 1 piece suit with hood
SAFAGA - SHARM
7mm 1 piece suit
6.5mm 1 piece suit with hood
5.5mm jacket with hood
ICELAND COMFORT
BLIZZARD
BLIZZARD PRO
INTRUDER
6.5mm 1 piece suit with hood
7mm 1 piece suit with hood
7mm 1 piece suit with hood
4mm 1 piece suit neoprene
3mm 1 piece suit neoprene
WO M E N ’ S S I Z E S
SPECS
5.5mm 1 piece suit
ICELAND
CHILDREN’S SIZES
USUAL SIZES
38
40
42
44
46
48
AQUA LUNG SIZES
XS
S
M
ML
L
XL
PARTS TO MEASURE
1
2
3
4
5
6
HEIGHT
150-160 160-163 163-166 166-170 169-172 175…
WEIGHT (kg)
47-50
50-54
54-61
61-65
65-72
73…
HIP CIRCUMFERENCE
76
80
82
87
91
95
WAIST CIRCUMFERENCE
62
65
68
73
77
81
CHEST CIRCUMFERENCE
72
74
77
82
88
92
(B) NECK TO WRIST
67
68
70
73
76
79
WRIST CIRCUMFERENCE
15
16
17
18
19
20
ANKLE CIRCUMFERENCE
20
21
22
23
24
25
CALF CIRCUMFERENCE
30
31
32
33
35
36
(F) CROTCH TO ANKLE
67
69
71
73
77
80
(B) NECK TO ANKLE
124
129
132
139
145
150
BICEP CIRCUMFERENCE
25
26
28
29
30
31
HEAD CIRCUMFERENCE
50
53
56
59
62
63
FOREHEAD TO NAPE
45
46
46
47
48
49
SIZE PARTS
8
10
12
14
HEIGHT
135-139 139-143 144-148 148-152 152-156
Min tolerance
WEIGHT (kg)
31-33
34-36
38-40
41-43
45-57
+ - 4 + - 3
CHEST
67-72
70-75
73-78
76-81
79-84
WAIST
61-66
65-70
67-73
71-76
79-84
+ - 5 + - 5
FOREARM
23-24
24-25
25-26
26-27
27-28
WRIST
15-16
15-16
16-17
16-17
17-18
+ - 5 + - 2
CROTCH TO ANKLE 51-55
53-57
55-59
57-61
59-63
29-31
30-32
31-33
32-34
33-35
CALF
8.0
16
-+ 1 + - 1 + - 1 + - 1.5 + - 3 + - 1 + - 2 + - 2 79
PARTNERS NEMO 33 OCEANICA PROD POISSON LUNE PRODUCTION NAUSICAA CNRS DRASSM MARENOSTRUM HEMISPHERESUB CINÉAQUA - PARIS TARA OCEAN Réseau Océan Mondial Earth & Sea Images Under the Pole
www.nemo33.com www.oceanica-prod.com www.poissonlune.fr www.nausicaa.fr www.cnrs.fr www.adramar.fr www.aquariummarenostrum.fr www.hemispheresub.fr www.cineaqua.com oceans.taraexpeditions.org www.worldoceannetwork.org underthepole.com
Laurent Ballesta, L’Oeil d’Andromède Erwan Amice, CNRS
Photos: PPO2maxTeam. JJ. L’Héritier Lung International 2009-2010 Aqua Lung®, Apeks®, Sea Quest® names, logos and their respective trademarks are registered trademarks of Aqua Lung International. Suunto® and the Suunto logo are registered trademarks of Suunto Oy. Printed in France - FO-design. Products, technical details and specifications in this catalog are subject to change without notice.
©Aqua
COLORS You have special needs and requirements?
BY AQUA LUNG
Aqua Lung has decided to help you on your choice. You will find on this new catalogue some colored logos, they will help you to make an appropriated selection for your next diving gear.
TRAVEL
PHOTO
CENTER
Compact and lightweight
Dedicated regulators,
Durable and easy to
equipment, without
help the shooting.
service gears for intensive
sacrificing performance
Freedom of the field of
use without relinquishing
and comfort
vision.
performance or comfort
You will find products as:
You will find products as:
You will find products as:
• MIKRON
• KRONOS
• CALYPSO
• ZUMA
• KRONOS SUPREME
• SAFAGA
• BALI
• MISTRAL
• WAVE
• MAHE
AL-CATA2010_couverture.indd 2
24/12/09 9:03:10
2010 A Q U A L U N G
JOURNEY
We make equipment for people to experience the fun and adventure of scuba diving.
10
43.12 N 5.32 E
43.12 N 5.32 E
AQUALUNG.COM EN
AL-CATA2010_couverture.indd 1
24/12/09 9:03:08