CONTINUING CLASSIC INNOVATIONS IN CAR AUDIO Celebrating over 30 years in the 12 Volt industry, Alphasonik is the original developer of ground-breaking technologies such as high voltage signal transfer and amplifier fan cooling, which remain a benchmark in high-end audio. The spirit of Alphasonik has brought to market an audio line of high quality, proven performance products showcased through exceptional cosmetics. Alphasonik amplifiers, signal processors, subwoofers, enclosures, components, tweeters, full range speakers and audio accessories have given the car audio industry a new sound. Through innovative design and performance, Alphasonik has no equal.
ALPHASONIK’S MISSION STATEMENT
It is Alphasonik’s mission to provide our customers
superior and innovative products combined with
exceptional service, establishing a long term
profitable relationship.
PMA SERIES CLASS D MONO BLOCK AMPLIFIERS
Employing Class D topology, these Alphasonik amplifiers keep cool and run more efficiently to achieve low frequency reproduction, delivering high output performance into 1-ohm loads and
HOUR METER
Never before has a mobile audio product incorporated a method to log the actual time of use. The tamper-proof aviationgrade Hobbs-type Hour Meter is a highly accurate mechanical counter driven by a dedicated analog clock circuit. This feature lets you accurately measure your system’s performance and push it to the limit. The Hour Meter is featured on all PMA Series Amps.
configure multiple speakers to reach a greater output.
PMA1200DE
Model shown
PMA1200DE
1-CHANNEL CLASS D MONO BLOCK AMPLIFIER
AMPLIFIER FEATURES •
• • •
INTERFACE
TERMINALS
Class D Circuitry – This technology produces a more stable and efficient power output. Without wasting excess power that turns into heat, Class D Circuitry produces less energy loss, requiring a smaller heat sink and making the entire amplifier smaller. 1-ohm Stable – All PMA Class D and HCE Series Amplifiers are 1-ohm stable, meaning they allow for the use of low impedance speakers while still delivering high amounts of power. Linkable Amplifiers – Having the ability to link two of the same amplifiers together, combining both output channels into one. This gives way to double the efficiency. Tiffany-Style RCA Jacks – Unlike other RCA jacks, these are made of only one piece and are hard-mounted directly to the amp’s chassis, eliminating broken, pulled-off or pushed-in RCA plugs.
•
Remote Bass Boost Control
•
4-way Protection Circuitry
•
Remote Digital Volt Meter
•
Beveled Clear Acrylic Protective Cover
•
Hour Meter
•
Parallel Line-Out RCA Jacks
•
Solid Brass Nickel-Plated Terminal Blocks
•
MOSFET High-Speed Switching
•
Cooling Fan(s)
1300 Watts x 1 @ 4Ω Mono 2000 Watts x 1 @ 2Ω Mono 2400 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/8 x 2 1/2 x 20 7/8” (232 x 64 x 530mm)
PMA1000DE
1-CHANNEL CLASS D MONO BLOCK AMPLIFIER 1000 Watts x 1 @ 4Ω Mono 1500 Watts x 1 @ 2Ω Mono 2060 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/8 x 2 1/2 x 17 3/4” (232 x 64 x 451mm)
Power Supply
PMA6BE
REMOTE BASS BOOST CONTROL
The PMA6BE gives you the power to control your system’s bass equalization from the convenience of the driver’s seat. This backlit control knob adjusts the amplifier’s bass level. It’s standard with all Class D Amps.
PMA100VE
REMOTE DIGITAL VOLT METER
The PMA100VE gives true, real-time monitoring of the system’s amplifier voltage. It lets you know if your charging system is supplying enough voltage to meet your musical needs. A 16-foot cord is included, allowing you to mount this volt meter in the trunk, passenger cabin or on your dash. The PMA100VE is included with all PMA Series Amps.
1
PMA SERIES HIGH CURRENT AMPLIFIERS
This series of amplifiers is specifically designed to deliver 1-ohm mono loads, ideal for powering multiple voice coils in parallel or for running 4-ohm loads where maximum dampening and minimum distortion is desired.
HOUR METER
The Hour Meter is featured on all PMA Series Amps
Also included are the Remote Bass Boost Control and Digital Volt Meter. PMA1000HCE
Model shown
PMA1000HCE
2-CHANNEL HIGH CURRENT AMPLIFIER
AMPLIFIER FEATURES •
Solid Brass Nickel-Plated Terminal Blocks – This feature allows for better conduction of electricity and improved current flow. Using this type of metal also protects against corrosion.
•
Remote Bass Boost Control – Install this remote knob anywhere and adjust the low-end frequencies on the fly.
•
Remote Digital Volt Meter – This meter ensures that the amplifier maintains the proper amount of voltage during operation.
•
Cooling Fan(s) – To ensure smooth and efficient operation, special cooling fans improve heat dissipation to keep the amplifier’s temperature at a suitable level.
•
Bridgeable
•
Tiffany-Style RCA Jacks
•
Bass Boost
•
1-ohm Stable
•
4-way Protection Circuitry
•
Hour Meter
•
Beveled Clear Acrylic Protective Cover
•
Onboard Crossover
•
Parallel Line-Out RCA Jacks
Subsonic Filter
•
MOSFET High-Speed Switching Power Supply
•
500 Watts x 2 @ 4Ω Stereo 900 Watts x 2 @ 2Ω Stereo 1500 Watts x 2 @ 1Ω Stereo 1575 Watts x 1 @ 4Ω Mono 2500 Watts x 1 @ 2Ω Mono 3000 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/16 x 2 5/8 x 26” (230 x 67 x 660mm)
PMA600HCE
2-CHANNEL HIGH CURRENT AMPLIFIER 300 Watts x 2 @ 4Ω Stereo 550 Watts x 2 @ 2Ω Stereo 900 Watts x 2 @ 1Ω Stereo 950 Watts x 1 @ 4Ω Mono 1550 Watts x 1 @ 2Ω Mono 1800 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/16 x 2 5/8 x 19 3/4” (230 x 67 x 502mm)
PMA640HCE
4-CHANNEL HIGH CURRENT AMPLIFIER INTERFACE
TERMINALS
PMA10BE
REMOTE BASS BOOST CONTROL (Included)
2
PMA100VE
REMOTE DIGITAL VOLT METER (Included)
160 Watts x 4 @ 4Ω Stereo 290 Watts x 4 @ 2Ω Stereo 480 Watts x 4 @ 1Ω Stereo 500 Watts x 2 @ 4Ω Mono 825 Watts x 2 @ 2Ω Mono 960 Watts x 2 @ 1Ω Mono Dimensions (W x H x L): 9 1/16 x 2 5/8 x 19 3/4” (230 x 67 x 502mm)
PM SERIES
CLASS A/B BI-POLAR POWER AMPLIFIERS Alphasonik’s PM Series Amplifiers give novice enthusiasts various options for delivering ample power. Distortion is reduced thanks to Darlington topology bi-polar output transistors. These amplifiers run cool and efficiently to power just about any configuration of subwoofers and speakers.
PM12005E
Model shown
AMPLIFIER FEATURES •
• •
Hi- and Low-Level Inputs – Using the speaker wires from any head unit, you can pass audio signals to the amplifier by converting the speaker level output into a low-level signal using the included wire harness. 4-Way Protection Circuitry – Thermal, Short Circuit, Overload & DC Offset Onboard Crossover – This gives you the capability to filter out desired frequencies for particular speakers for increased sonic accuracy.
•
Bridgeable
•
Remote Bass Boost Control (optional)
•
Tiffany-Style RCA Jacks
•
Solid Brass Nickel-Plated Terminal Blocks
•
Heavy-Duty One-Piece Extruded Aluminum Heat Sink
PM12005E
PM6002E
75 Watts x 4 @ 4Ω Stereo & 200 Watts x 1 @ 4Ω Mono 120 Watts x 4 @ 2Ω Stereo & 320 Watts x 1 @ 2Ω Mono 185 Watts x 2 @ 4Ω Mono & 320 Watts x 1 @ 2Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 19” (235 x 51 x 483mm)
150 Watts x 2 @ 4Ω Stereo 240 Watts x 2 @ 2Ω Stereo 480 Watts x 1 @ 4Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 11 7/8” (235 x 51 x 302mm)
PM6004E
PM3002E
75 Watts x 4 @ 4Ω Stereo 120 Watts x 4 @ 2Ω Stereo 240 Watts x 2 @ 4Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 12 5/8” (235 x 51 x 321mm)
100 Watts x 2 @ 4Ω Stereo 150 Watts x 2 @ 2Ω Stereo 300 Watts x 1 @ 4Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 8 1/8” (235 x 51 x 206mm)
5-CHANNEL CLASS A/B BI-POLAR AMPLIFIER
4-CHANNEL CLASS A/B BI-POLAR AMPLIFIER
2-CHANNEL CLASS A/B BI-POLAR AMPLIFIER
2-CHANNEL CLASS A/B BI-POLAR AMP
PM1600DE
INTERFACE
CLASS D MONO BLOCK AMP TERMINALS
PMA10BE
REMOTE BASS BOOST CONTROL (Optional)
PMA100VE
REMOTE DIGITAL VOLT METER (Optional)
300 Watts x 1 @ 4Ω Mono 600 Watts x 1 @ 2Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 6 1/2” (235 x 51 x 165mm)
3
800SERIES
ALPHA 800 SERIES DUAL 4-ohm SUBWOOFERS It’s no surprise that the 800 Series is one of Alphasonik’s most popular subwoofers. Featuring the taller, narrower J-surround and a special ring which conceals the mounting screws, these woofers are offered in dual 4-ohm, allowing you more flexibility in installation.
SUBWOOFER FEATURES •
Cast Aluminum CNC Machine Finished Alpha Basket
•
Motor Assembly Heat Sink
•
Kevlar® -Reinforced Cone
•
TLTF J-Surround
•
High Tinsel Strength Two-Layer Surround
•
Exclusive Mounting Ring
•
Flat Progressive Rate Nomex® Damper w/ Spiral-Woven Leads
•
8-gauge Lug-Lock Input & Output Terminals
PSW810E
10” ALPHA 800 SERIES SUBWOOFER Rated at 800 Watts RMS 89dB Efficiency Frequency Response of 29Hz to 500Hz 135 oz. Double-Stacked Magnet Dual 4-ohm 2-1/2” Voice Coils Mounting Dimensions: Depth: 6 1/8” (156mm) Through Hole: 8 7/8” (225mm) Diameter: 10 3/16” (259mm)
TLTF SURROUND
Subwoofers feature a massive 2-layer, high-travel surround for reliability and control at maximum excursion. The 800 Series, featuring our new TLTF J-Surround, is designed for increased cone surface area without sacrificing low frequency response.
psw810E
Model shown US PATENT #6,601,645 B1 US PATENT #6,656,000 B2 US PATENT #D478,556 S
PSW812E
12” ALPHA 800 SERIES SUBWOOFER Rated at 900 Watts RMS 92dB Efficiency Frequency Response of 28Hz to 500Hz 135 oz. Double-Stacked Magnet Dual 4-ohm 2-1/2” Voice Coils Mounting Dimensions: Depth: 6 5/8” (168mm) Through Hole: 10 7/8” (276mm) Diameter: 12 5/16” (313mm)
PSW815E
15” ALPHA 800 SERIES SUBWOOFER Rated at 1000 Watts RMS 94dB Efficiency Frequency Response of 24Hz to 500Hz 150 oz. Double-Stacked Magnet Dual 4-ohm 3” Voice Coils Mounting Dimensions: Depth: 8” (203mm) Through Hole: 13 7/8” (352mm) Diameter: 15 1/16” (383mm)
4
600SERIES CAST ALUMINUM SUBWOOFERS
Increased control is what results from Alphasonik’s combination of technology in the 600 Series. These woofers are designed for competition and work best in smaller sealed enclosures and moderately-sized ported enclosures.
SUBWOOFER FEATURES •
Cast Aluminum CNC Machine Finished Alpha Basket
•
Motor Assembly Heat Sink
•
Kevlar ®-Reinforced Cone
•
TLTF J-Surround
•
High Tinsel Strength Two-Layer Surround
•
Exclusive Mounting Ring
•
8-gauge Lug-Lock Input & Output Terminals
BASKET WEAVE, KEVLAR® REINFORCED KRAFT PULP CONE All Alphasonik 600 Series subwoofers use our environmentally treated Kevlar ® reinforced, kraft pulp cone – the most neutral sounding material in the industry. Virgin, long-fiber kraft pulp is air-cured and strengthened with Kevlar ®.
psw610E
Model shown US PATENT #6,601,645 B1 US PATENT #6,656,000 B2 US PATENT #D478,556 S
PSW610E
10” ALPHA 600 SERIES SUBWOOFER Rated at 600 Watts RMS 87dB Efficiency Frequency Response of 33Hz to 500Hz 75 oz. Double-Stacked Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 6” (152.4mm) Through Hole: 8 7/8” (225mm) Diameter: 10 3/16” (259mm)
PSW612E
12” ALPHA 600 SERIES SUBWOOFER Rated at 700 Watts RMS 88dB Efficiency Frequency Response of 30Hz to 500Hz 75 oz. Double-Stacked Magnet Dual 4-ohm 2-1/2” Voice Coils Mounting Dimensions: Depth: 6 1/2” (165mm) Through Hole: 10 7/8” (276mm) Diameter: 12 5/16” (313mm)
5
400SERIES STAMPED STEEL DUAL 4-ohm SUBWOOFERS
This series is the finest of Alphasonik’s stamped steel basket subwoofers. With a larger motor structure and magnet, these woofers offer increased power handling. Additionally, Alphasonik’s gasket gives installers creative alternatives. The gasket conceals the mounting screws, giving the front face of the woofer a refined black look. The 400 Series also employs the latest technology in mineral-filled polymers for musical neutrality. The inverted dome geometry can handle tremendous stress without deformation.
PSW410E
10” ALPHA 400 SERIES SUBWOOFER Rated at 400 Watts RMS 90dB Efficiency Frequency Response of 30Hz to 500Hz 46 oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 5 1/2” (140mm) Through Hole: 9 3/8” (238mm) Diameter: 10 15/16” (278mm)
PSW412E
12” ALPHA 400 SERIES SUBWOOFER psw410E
Model shown US PATENT #6,601,645 B1 US PATENT #D478,556 S
SUBWOOFER FEATURES
6
•
Stamped Steel Polished w/ Brushed Hairline Finish Alpha Basket
•
Motor Assembly Heat Sink
•
High Rigidity Inverted Dome
•
Mineral-Filled Composite Cone
•
EPDM Surround
•
High Tinsel Strength Two-Layer Surround
•
Exclusive Mounting Ring
•
8-gauge Lug-Lock Input Terminals
Rated at 500 Watts RMS 91dB Efficiency Frequency Response of 25Hz to 500Hz 46 oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 6” (152mm) Through Hole: 11 1/8” (283mm) Diameter: 12 7/8” (327mm)
300 SERIES LOW PROFILE SUBWOOFERS
With the Alphasonik 300 Series Shallow Woofer you can achieve an extreme amount of bass with minimal space. Featuring a Spun Aluminum cone, 8-gauge lug-lock terminals, for maximum performance and a mounting depth of only 3.5 inches. These woofers work best for those small areas in your vehicles and can fit any enthusiast life style.
psw310X
Model shown US PATENT #6,601,645 B1 US PATENT #D478,556 S
PSW310X
10” ALPHA 300 SERIES SUBWOOFER
SUBWOOFER FEATURES •
Low profile design, Mounting depth of 3.5”
•
High strength glass fiber enhanced surround
•
Spun aluminum inverted cone
•
Powder coated stamped steel basket
•
Platinum plated 8-gauge Lug-Lock terminals
Rated at 400 Watts RMS 89.7dB Efficiency Frequency Response: 28Hz to 500Hz 46oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 3 1/2” (89mm) Through Hole: 9 3/5” (244mm) Diameter: 10.2/5” (264mm)
PSW312X
12” ALPHA 300 SERIES SUBWOOFER Rated at 500 Watts RMS 89.2dB Efficiency Frequency Response: 24Hz to 500Hz 46oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 3.5/8” (89mm) Through Hole: 11.5/8” (321mm) Diameter: 12 5/8” (321mm)
7
100 SERIES
ALPHA 100 SERIES DUAL 4-ohm SUBWOOFERS You can achieve natural sound in sealed, ported and bandpass enclosures with Alphasonik’s 100 Series Stamped Subwoofers. Featuring laminated, non-pressed paper cone and 8-gauge lug-lock terminals, this family of woofers stands above other contenders.
SUBWOOFER FEATURES
PSW110E
•
Stamped Steel Polished w/ Brushed Hairline Finish Alpha Basket
•
Motor Assembly Heat Sink
•
Laminated Non-Pressed Pulp Paper Cone
•
U.V. Treated Pressure-Molded Foam Surround
•
High Tinsel Strength Two-Layer Surround
•
Exclusive Mounting Ring
•
8-gauge Lug-Lock Input Terminals
10” ALPHA 100 SERIES SUBWOOFER Rated at 200 Watts RMS 89dB Efficency Frequency Response of 30Hz to 500Hz Dual 4-ohm 1 1/2” Voice Coils Mounting Dimensions: Depth: 4 3/4” (121mm) Through Hole: 9 1/8” (232mm) Diameter: 10 1/4” (260mm)
PSW112E
12” ALPHA 100 SERIES SUBWOOFER psw110E
Model shown US PATENT #6,601,645 B1 US PATENT #D478,556 S
Rated at 230 Watts RMS 93dB Efficency Frequency Response of 30Hz to 500Hz Dual 4-ohm 1 1/2” Voice Coils Mounting Dimensions: Depth: 5 1/8” (130mm) Through Hole: 11 1/4” (286mm) Diameter: 12 1/2” (318mm)
PSW115E
15” ALPHA 100 SERIES SUBWOOFER Rated at 400 Watts RMS 93dB Efficiency Frequency Response of 30Hz to 500Hz Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 6 5/8” (168mm) Through Hole: 13 13/16” (351mm) Diameter: 15 1/4” (387mm)
8
ALPHASERIES COMPONENT SPEAKER SYSTEMS
Since every installation is different, Alphasonik’s notorious component systems cater to the many unique sizes of today’s vehicles. No matter the configuration, any system can achieve precision sound with accurate response.
COMPONENT FEATURES •
Polypropylene-Injected Cone
•
Butyl Rubber Surround
•
2-Layer Hi-Temp ASV Voice Coil
•
Oversized Poly-Woven Damper
•
Proprietary Heavy-Gauge Coated Steel Frame
•
Proprietary Rings with Jewel Cut Back Badge 0
•
360 Swivel Tweeter Design
•
1 Pair Tweeter Surface Mount
•
•
1 Pair 12dB/Octave Crossover Networks
Housings
•
4-ohm Impedance
1 Pair Tweeter Flush Mount
•
Complete Mounting Hardware with
Housings
Grilles and Templates
US PATENT #6,601,645 B1
Pcz65E
6.5” 2-WAY COMPONENT SPEAKER SYSTEM
Power Handling: 120 Watts RMS Frequency Response: 35Hz – 25kHz, +/-3dB Sensitivity: 90dB 1w/1m Mounting Depth: 2-1/2” / 64mm (woofer) Mounting Depth: 1” / 25mm (flush mount tweeter)
Pcz50E
5.25” 2-WAY COMPONENT SPEAKER SYSTEM
Power Handling: 100 Watts RMS Frequency Response: 35Hz – 25kHz, +/-3dB Sensitivity: 90dB 1w/1m Mounting Depth: 2-1/8” / 54mm (woofer) Mounting Depth: 1” / 25mm (flush mount tweeter)
PcT6801
6 x 8” COMPONENT 2-WAY SYSTEM 6 x 8” Component Mid-Bass w/ Carbon Reinforced Woven Glass Cone 19mm Silk Dome Tweeter 2-Way Component Crossover Power Handling: 200 Watts RMS Frequency Response: 42Hz – 22kHz, +/-3dB Sensitivity: 92dB 1w/1m Mounting Depth: 2-1/2” (woofer) Mounting Depth: 3/4” (flush mount tweeter)
9
ALPHA SERIES FULL RANGE SPEAKERS
Full range speakers harmonize with your subwoofers and other component speakers to deliver a clean and precise sound. Alphasonik’s Full Range Speakers provide the most accurate sound reproduction over a wide spectrum.
SPEAKER FEATURES •
Black Anodized Aluminum
•
Titanium Vapor-Deposition Cone/
•
Integrated Crossover with Solid-
•
360° Swivel Tweeter (except in
•
Oversized Poly-Cotton Spider and
•
Proprietary High-Gauge Steel
Voice Coil Former
PFZ693)
Dome Tweeter
Bottomless Motor Geometry
State Tweeter Protection •
Polypropylene Injected Cone
•
Butyl Rubber Surround
Frame •
Proprietary Rings with Jewel Cut Back Badge
PFZ525E
5.25” 2-WAY FULL RANGE SYSTEM
Power Handling: 120 Watts RMS Frequency Response: 65Hz – 22kHz, +/-3dB Sensitivity: 91.5dB 1w/1m Mounting Depth: 2-1/8” (54mm)
PFZ460E
4 X 6” 2-WAY UNIVERSAL MOUNT FULL RANGE SYSTEM
Power Handling: 100 Watts RMS Frequency Response: 70Hz – 22kHz, +/-3dB Sensitivity: 91dB 1w/1m Mounting Depth: 2-1/2” (64mm)
PFZ400E
4” 2-WAY FULL RANGE SYSTEM
Power Handling: 100 Watts RMS Frequency Response: 75Hz – 22kHz, +/-3dB Sensitivity: 91dB 1w/1m Mounting Depth: 1-3/4” (44mm)
PFZ352E
3.25” 2-WAY FULL RANGE SYSTEM
Power Handling: 80 Watts RMS Frequency Response: 85Hz – 22kHz, +/-3dB Sensitivity: 90dB 1w/1m Mounting Depth: 1-3/4” (44mm)
PFZ410E
4 X 10” 2-WAY FULL RANGE SYSTEM
Black Anodized Aluminum Voice Coil Former – 25mm Titanium Vapor-Deposition Dome Tweeter – 25mm Power Handling: 120 Watts RMS Frequency Response: 70Hz – 22kHz, +/-3dB Sensitivity: 93dB 1w/1m Mounting Depth: 2-1/2” (64mm)
10
PFZ652E
6.5” 2-WAY FULL RANGE SYSTEM
Power Handling: 160 Watts RMS Frequency Response: 55Hz – 22kHz, +/-3dB Sensitivity: 92dB 1w/1m Mounting Depth: 2-1/2” (64mm)
360˚ SWIVEL TWEETER
PFZ693E
6 X 9” 3-WAY FULL RANGE SYSTEM
Titanium Vapor-Deposition Dome Tweeter – 25mm Titanium Vapor-Deposition Cone Mid – 35mm Tweeter & Midrange Non-Swivel Stationary Mount Power Handling: 240 Watts RMS Frequency Response: 46Hz – 22kHz, +/-3dB Sensitivity: 94dB 1w/1m Mounting Depth: 3-1/2” (89mm)
PFZ692E
6 X 9” 2-WAY FULL RANGE SYSTEM
Titanium Vapor-Deposition Dome Tweeter – 28mm Power Handling: 200 Watts RMS Frequency Response: 46Hz – 22kHz, +/-3dB Sensitivity: 93dB 1w/1m Mounting Depth: 3-1/2” (89mm)
PFZ680E
6 X 8”/ 5 X 7” 2-WAY FULL RANGE SYSTEM
Power Handling: 200 Watts RMS Frequency Response: 46Hz – 22kHz, +/-3dB Sensitivity: 93dB 1w/1m Mounting Depth: 2-1/2” (64mm) US PATENT #6,601,645 B1
11
AMP LIFIED VENTED BASS ENCLOSURE
Alphasonik’s PBAT10E Amplified Vented Bass Enclosure gives you the liberty to quickly add a powerful bass thrust to an existing system. With a recognizable design and durable construction, this enclosure is one of Alphasonik’s best-sellers. A remote bass boost control and wiring kit is included.
REMOTE BASS BOOST CONTROL
Backlit rotary control knob in surface mount case with 16’ modular cord included.
PBAT10E
10” AMPLIFIED VENTED BASS ENCLOSURE High Quality Construction Rear Facing Tuned Port Black Suppleather Cover MOSFET Ampliflier Remote Bass Control Knob High & Low Level Inputs Adjustable Low Pass Filter: 40Hz-250Hz Adjustable Bass Boost 0 - 18dB 10” Woofer w/ Mineral-Filled Composite Cone Bumped Back Woofer Plate Extended & Vented Pole Piece 100 Watts RMS
12
BASSSERIES ENCLOSUREs
For those looking for a quick and convenient heart-pounding upgrade, Alphasonik’s Bass Series Enclosures offer the solution. Ready to install in minutes, these boxes are built to the exact specifications of the woofer, getting the most from the amplifier and maximizing the overall efficiency. Alphasonik enclosures are crafted with your convenience in mind.
PB110LE
10” SINGLE PRE-LOADED ENCLOSURE
Single 12” Woofer with Mineral-Filled Composite Cone Power Handling: 300 Watts RMS Sensitivity: 95dB Frequency Response: 28Hz-1kHz Single Terminal w/ 4-ohm Impedance Dimensions: 16.3” x 9.8” x 12.8” (414mm x 249mm x 325mm)
pB212LE
Model shown
PB112LE
12” SINGLE PRE-LOADED ENCLOSURE
Single 12” Woofer with Mineral-Filled Composite Cone Power Handling: 400 Watts RMS Sensitivity: 96dB Frequency Response: 23Hz-1kHz Single Terminal w/ 4ohm Impedance Dimensions: 17.9” x 10.2” x 15.6” (455mm x 259mm x 396mm)
PB210LE
10” DUAL PRE-LOADED ENCLOSURE
Dual 10” Woofers with Mineral-Filled Composite Cone Power Handling: 600 Watts RMS Sensitivity: 98dB Frequency Response: 25Hz-1kHz Dual Terminals w/ 4ohm Impedance at each terminal Dimensions: 31.1” x 9.8” x 12.8” (790mm x 249mm x 325mm)
PB212LE
12” DUAL PRE-LOADED ENCLOSURE
Dual 12” Woofers with Mineral-Filled Composite Cone Power Handling: 800 Watts RMS Sensitivity: 99dB Frequency Response: 20Hz-1kHz Dual Terminals w/ 4ohm Impedance at each terminal Dimensions: 34.6” x 11” x 15.6” (879mm x 279mm x 396mm)
13
DRIVERS LR
With Alphasonik’s line of processors,
LR
RADIO
LR
AUX
LR
FRONT
LR
REAR
+1 2V R EM G N D
SIGNAL PROCESSORS
SUB
INPUT GAIN
Equalizers and Bass Drivers your systems
LR
output will sound cleaner than ever. Increase
LR
your systems voltage, improves signal-to-noise ratio, decrease standing waves and reduce the noise floor with versatile components. PEQ70E
R 30Hz - 150Hz
50Hz
125Hz
315Hz
750Hz2
.2kHz
9kHz
PLD40E
8-VOLT LINE DRIVER
R
+1
D
Independent Variable Output Level Controls Rotary Control Knobs Input Impedance: 20K Ohms Frequency Response: 10Hz – 50kHz @ 1dB Signal-to-Noise Ratio: >110dB Dimensions (W x H x L): 9” x 1” x 3” 2V
7-Band Parametric Equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2kHz, 6kHz, 12kHz) Up to 9.75 Volts RMS Output Subwoofer Crossover Variable from 30Hz-120Hz @ 18dB/octave Master Volume Control Fader Control Subwoofer Level Control: +18dB Gain Main / AUX Input Selector On-board 30V bi-polar switching power supply Independent Left & Right AUX Input Sensitivity for Gain Matching 20dB Headroom Eliminates Signal Clipping Nickel-Plated RCA Inputs & Outputs Dimensions (W x H x D): 7 x 1 1/8 x 4 1/16”
F
PEQ70E
FREQ
SUB GAIN
N
7-BAND IN-DASH PARAMETRIC EQUALIZER
AUX ILL
EM
PEQ70E
ADER
G
GAINF
1CH
POWER
2CH 3CH
4CH
Four Channel Line Driver
PLD40E
OUTPUT 1
2
3
INPUT 4
1
2
BALANCED DIGITAL BASS CONTROL
L
PO W
S
N TR O
BA S
O C
WIDE
M
AX
ER
PBD100E
PBD100E
3.5 VOLT BASS DRIVER
14
D
2V
N
G
+1
R
EM
O N TR O C
U T TP U O
IN PU
T
L
SWEEP
Maximum input of 15V RMS Frequency Response from 10Hz-100kHz Balanced Input Noise Rejection >60dB Sweep Frequencies from 27Hz - 63Hz Total Harmonic Distortion of 0.003% Remote Mount w/ cord (Included)
3
4
12kHz
CAPS &TWEETERS Farad Capacitors
Stabilize the flow of energy to the sound system with Alphasonik’s comprehensive line of Capacitors. With a selection of various farad capacities and sleek designs, you’re sure to find the right fit.
CAPACITOR FEATURES •
Smart Electronic Top & Nickel-Plated Power Connections
•
24-volt Continuous / 30-volt Surge
•
4-Digit Digital Display
•
2 Orange LED Indicator Lights
•
Voltage Sensing Digital Display
•
Reverse Polarity Warning
•
Under/Over Voltage Warning
•
Voltage Display Calibration
•
Transparent Mounting Brackets.
PCP15LE
1.5 FARAD CAPACITOR
Dimensions: (L x W x H1 x H2) 3 1/2 x 3 1/2 x 10 1/8 x 11 1/4”
TWEETERS Alphasonik’s family of PTZ Tweeters provides you plenty of options in outfitting your system. Select the Titanium version for ultra bright and crisp highs or the Silk for a smooth and natural response. Balanced and matched outboard crossovers are included. All PTZ tweeters come with 12dB outboard crossovers and surface and flush mounting accessories.
Ptz20tE
titanium DOME TWEETER
Titanium Polymer Dome Tweeter – 20mm Surface & Flush Mount Housing 3600 Swivel Tweeter Design Separate 12dB Crossover Solid-State Tweeter Protection Power Handling: 100 Watts RMS Frequency Response: 2kHz – 22kHz, +/-3dB Sensitivity: 91.5dB 1w/1m Mounting Depth: 3/4” (flush mount tweeter)
Ptz25tE
titanium DOME TWEETER
Titanium Polymer Dome Tweeter – 25mm Surface & Flush Mount Housing 3600 Swivel Tweeter Design Separate 12dB Crossover Solid-State Tweeter Protection Power Handling: 100 Watts RMS Frequency Response: 2kHz – 22kHz, +/-3dB Sensitivity: 91.5dB 1w/1m Mounting Depth: 3/4” (flush mount tweeter)
Ptz25sE
Pure SILK DOME TWEETER
Pure Silk Dome Tweeter – 25mm Surface & Flush Mount Housing 3600 Swivel Tweeter Design Separate 12dB Crossover Solid-State Tweeter Protection Power Handling: 100 Watts RMS Frequency Response: 2kHz – 22kHz, +/-3dB Sensitivity: 91dB 1w/1m Mounting Depth: 3/4” (flush mount tweeter)
15
7050 VILLAGE DRIVE, BLDG G • BUENA PARK, CALIFORNIA 90621 714.670.8950 • FAX: 714.670.8959 • ALPHASONIKINC.COM
proud member of
Copyright 2010 Alphasonik, Inc. All rights reserved. Any unauthorized reproduction or use of any Alphasonik logos, images or design elements is strictly prohibited by law. Specifications subject to change without notice.