What Is a DSMB?

By Christine Tamburri and Wally Endres

DSMB stands for Dive Surface Marker Buoys and SMB for Surface Marker Buoys, both of which are common and essential safety devices These brightly coloured, inflatable tubes, sometimes called safety sausages, are critical pieces of equipment that divers should take on most dives, especially dives involving extended travel into the ocean, and when they are high swells or poor visibility conditions Divers most often use them as signalling devices to mark their locations below the surface and alert boat traffic Technical divers may use a DSMB as an upline to fulfil their decompression obligations Rescuers might deploy them in the event of a distressed diver, like how a lifeguard would use a rescue tube on the surface There are several myths and misconceptions about DSMBs, and many divers use them improperly and ineffectively.

TERMINOLOGY

A DSMB is technically an SMB, but an SMB is not a DSMB. Divers deploy a DSMB mostly while still underwater thanks to an over pressurisation valve (OPV) This valve allows air to escape and relieves the gas that expands, according to Boyle’s Law Without an over pressure relief valve, Boyle’s law.

Without an over pressure relief valve, Boyle’s law would result in over inflation or rupture of the SMB So, design determines the application, and specifically where they should be inflated at the service or underwater. This article will refer to DSMBs as their applications and features are more extensive than their SMB counterparts DSMB’s are also typically designed not to be too bulky, for obvious reasons.

SPECIFICATIONS

DSMBs are available in various sizes, shapes, and colors some are more practical than others A 1 2 meter DSMB is sufficient for most divers learning deployment techniques for training purposes. Outside of a training environment, however, divers should use at minimum a 1 8 meter DSMB, which provides better visibility and surface support by other boats as well as the divers original dive boat. This is particularly important in unfavourable seas with large swells It also offers sufficient lift to avoid being dragged underwater while the diver is ascending.

Orange and yellow are the most common colors and offer the best visibility, but there is no industry standard color. DSMBs are also available in pink, white, green, and even black, studies support orange or yellow Some manufacturers add reflective strips and a thin, clear sleeve at the top to accommodate a strobe or chem light for deployment in low light conditions

Some divers designate specific DSMB colors to communicate different messages to surface support personnel. This practice is most common in technical diving For example, an orange DSMB may communicate that all divers are accounted for and okay, and a yellow DSMB may communicate some emergency A slate or an underwater notebook page attached to the yellow DSMB can specify the problem and describe the required intervention measures from surface support Of course, this system only works if all divers agree upon one predefined plan

Regardless of the color, all divers should consider writing their names in large letters on their DSMBs so surface support can more easily identify the diver below

TECHNIQUES

Some divers are adamant about using a reel instead of a spool or vice versa Divers should weigh the pros and cons of each and decide based on their personal diving needs Each has its advantages a reel is easier to deploy, but a spool is more difficult to jam

Divers also debate whether to permanently attach (pre rig) a spool or reel to the DSMB to ready it for rapid deployment or leave it to assemble underwater. Should a diver clip the DSMB directly onto their BCD or store it in a pocket or pouch? Every diver should evaluate their needs and decide which option is the most practical for all these considerations.

There are strong opinions about inflating a DSMB Should you orally inflate it? What about exhaling from your second stage or purging the octopus into the open bottom? How about attaching a low pressure inflator from Drysuit or BCD? All methods are viable with proper training and regular practice

SAFETY CONSIDERATIONS

There are a few universal safety concerns to address whenever using a DSMB Divers should never clip the reel or spool to themselves during deployment because if it jams, the excess buoyancy could cause a rapid ascent. If you clip the reel or spool after the DSMB is already on the surface, a passing boat or curious topside passerby could yank the line, again causing a rapid ascent

Throughout deploying a DSMB, remember that slow is smooth, and smooth is fast. Divers should keep all lines taut and as far away from their bodies as possible. Maintaining this distance will decrease the likelihood of entanglement If there is excess slack in the line, take a moment to resolve it Issues can compound quickly, and the line is unforgiving if a diver becomes entangled.

Divers should have an easily accessible cutting device available every time they deploy a DSMB If possible, a dive buddy should be nearby to intervene in the event of a failed or disrupted deployment Safety scissors are better than knives as a general rule.

Most important, divers must practice Becoming proficient at deploying a DSMB takes time Go to a local pool or other confined water location with your buddy and practice each step of the process, identifying areas of deficiency. Ask instructors and mentors for help. Do not be afraid of failure, as that is how learning and muscle memory occurs At the end of every dive, consider deploying a DSMB Repetition creates proficiency and comfort with a skill that every diver should possess

Website - https://www.aquadivers.co.za/