Tronsmart TSM-G62C
1. Product Introduction Thank you for using our products! This is a wireless air mouse with built-in gyroscope and the world's best gravity acceleration sensor, It can realize the function of traditional remote controller, mouse, keyboard, bidirectional voice, and motion sensing game on android platform. It can have you released from your computer/TV/projector and other entertainment equipments, just flex your wrist, the direction of your wrist will be turned into the cursor on the screen. It can avoid the disadvantages that traditional mouses need to static desktop for reference or the button of infrared remote control operation , letting you play your computer/TV comfortable and convenient, completely control your computer/TV entertainment. Plug and play micro receiver, compatible with USB1.1 and USB2.0ďź› Suitable for computers, projectors, TV set-top boxes, HTPC etc., same as the USB mouse .
Function: 1. Support all the functions of the ordinary version 2.Support voice output （Mic version is not supported） 3.Support voice input (mic)
Features: 1.Six axis of gyroscope, real-time calibration. 2.ClearRecord with the AGC function in the recording circuit at a long distance. 3. Natural voice output with outstanding Mid-bass effect 4. Low power consumption: State of the mouse：< 20mA Bdirectional voice ：~35mA Hbernation：< 30uA
2. Description of Function Keys 2.1 Front side
Mute Home Up Down Left Right Confirm/Enter Return Menu
Motion sensing game key switch, if the host does not support the game, it’s the pause button of the mouse
2.2
The side Two sides, total 3 buttons. 2.2.1Two buttons on the left, respectively "volume +" and "volume -" 2.2.2 One button on the right, we call "custom" button 【Non-voice version】：Power OFF; enter standby state after pressing
the key for a short time, long time pressing close the host.
【Voice version 】: switch to audio output mode after short time pressing, pressing 2 seconds is the same as above.
2.3 The back
Press "Fn" and the key with orange characters simultaneously, you can input the corresponding orange characters . For example , "Fn" + "Q" input "1"
【 note 】 : Except the side buttons. only the button back to the ground is effective.
3. Using Method
3.1 Open and load two triple A batteries . 3.2 Plug the wireless receiver into an external device (the device must be started). 3.3 If the light is off, means "sleeping", then need press any key to wake it up. 3.4 After waking up, within the effective distance, red and blue lights flash one time simultaneously, then the blue light flashes slowly, meaning the connection is successful to start work. 3.5 If the red light is still flashing after waking up more than 3 seconds, please refer to "the code" sector.
4.
LED Light This mouse has a red and two blue LED lights. In short, The red light flashes constantly: irregular operating. The blue light is on : normal operating. 4.1 Description of the LED indicators: a) Red light flash fast: Disconnected with the wireless receiver. b) Red light flash slowly: Low voltage. c) Blue light flashes fast：Some button has being pressed down. 4.2
Normal work
a) Blue LED flashes every 5 seconds, but does not open voice. b) If it flashes faster than “a)”, there are several kinds of state, means : record or output voice 【Note】：The function of the lights on the back contain all the function of red and blue lights 5 .The Gyro Calibration Although the mouse supports the function of automatic calibration, it may also drift during the actual use, because of the change of voltage and temperature, at this moment you can have the controller stay in the desk about 2 to 3 seconds until the mouse did not move. Then the calibration finishes.
6. Sleep In the following three cases will product will enter "Sleep" (press any keys to wake up)
6.1 The mouse is stationary for more than 20 seconds,(if there is a voice input/output, it will not sleep) 6.2 Low voltage more than 20 seconds 6.3 Disconnected to the wireless receiver for more than 5 seconds
7. The code The mouse and receiver have been matched before leaving factory, plug the receiver into set-top boxes (computers, etc.), it can automatically connected with the mouse; Press the key , the blue light will be on. If the air mouse disconnected to the receiver, because of misoperation or other reasons during the use, (red LED lights flashes, but not the reason of low voltage),please try to connect it by the following methods: Plug the receiver into the USB socket of set-top box (computer, etc.), switch to the state of keyboard, please have the air mouse close to the receiver within 10 cm，Press "Fn" and “ ← ”about 5 seconds ， after the success of the code, press any key , the blue light will be on.
8. Speed regulation of the Air Mouse This product has five levels speed
8.1 Speed up ： Pressing "Fn" and “ ↑“ 3 seconds will accelerate a gear (two lights flash one time) .
8.2 Slow down ： Pressing "Fn" and “ ↓“ 3 seconds slow down a gear (two lights flash one time)
【Note】 ： Pessing“Fn” and "up/down", if the lights don't flash, means : it has been the fastest/the slowest gear.
9. voice 9.1 Features The function of voice input and output is open/closed automatically. If the host records, the recording of handle will open automatically. if the host closes the recording , then the handle will also close the recording module, meanwhile, if the host voice switches to the air mouse, it can be heard the sound immediately.
9.2 Channel switching 9.2.1 Default mode Plug the receiver into the host, voice won't been switched to the air mouse side automatically. it can only switch to the air mouse side after pressing the switch key .
9.2.2 Switching method If users need switch voice into the air mouse side, only need press the â&#x20AC;&#x153;custom" in the side. Press it again , then it will be back to the external host.
9.3 The microphone
9.3.1. This product has a built-in microphone circuit with the function of hardware automatic gain, In other words, people's normal voice can be clearly recorded, even in 2-3 meters.
9.3.2 The microphone channel of Voice version is always ready under the normal work . Voice search or recording can be made at any time as long as open the corresponding program on the host .
10. Remark In order to avoid the interference of the mouse motion, this product will shut down the mouse function automatically when the keyboard faces up. Vice versa.
11. Product parameters
Transport
;; 2.4G Radio frequency hopping technology
Effective distance
10 meters
Function of remote control
Android System keys
Mouse Function
6 axis gyro sensor
Size
143*52*14.5mm
Battery
2 triple A batteries
Standby Time
12 months
Working Current
the mouse: <20mA;sleep: <30uA
Receiver
USB 2.0
System Requirements
Windows, Android, Linux,