Dartmoor 2016 catalog - Eurobike edition

Page 1

DARTMOOR

CATALOG2016 EUROBIKE EDITION


geometry reach stack (mm) (mm) SHORT LONG

400 430

592 592

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

410 410

520 558

560 590

430 430

HT HT ST BB (mm) angle angle drop 115 115

64o 64o

75o 75o

–5 –5

WB (mm)

wheel size

hub size

1170 1200

27.5” 27.5”

150x12 150x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount

max. rotor size (mm) PM 160mm 203 PM 160mm 203

ROOTS RED DEVIL

Dartmoor Roots is a heavy duty freeride bike dedicated for the most demanding spots on earth. Last year Red Bull Rampage course was a final testing ground for this one. Szymon Godziek was the first one flippin’ it over the canyon gap in his qualification run and one of the fewer to clear it.

frame: frame size: wheel size: fork:

Roots is based on a four pivot suspension system with reinforced axles and bearings which guarantees the highest level of side stiffness. 27.5“ wheels give better flow in cruising over diffrent obstacles you can meet in the woods, and frame geometry designed specially for those wheels offers a perfect position and bike agility. Marzocchi 380CR forks and MOTO C2R rear shock will make you shreddin’ soft and comfortable, even on the longest jumps.

shock: headset: derailleur: shifter : brakes: crankset: chainring: cassette: pedals: rims: hubs:

Model continued from 2015

tires: handlebar: stem: grips: saddle: weight:

2

Red Devil, alu 7005, travel 200mm Long, Short 27.5” Marzocchi 380 CR, travel 200mm, axle20 mm, tapered Marzocchi Moto C2R, 222/69mm, spring 450 Dartmoor Blink, IS42/IS52 rear derailleur: SRAM X9 shifter: SRAM X5, 9–speed Avid Code, rotors 203mm Truvativ Descendant, 36T SRAM PG–950 11–28 Dartmoor Fever v.2 Dartmoor Shield 27.5”, 32H front: Dartmoor Revolt Disc 20, 32H rear: Dartmoor Revolt Cassette 150x12mm, 32H Kenda Nevegal Pro 27.5x2.35, folding Dartmoor Nitro DH 780mm, Ø31.8mm Dartmoor Rage v.2, Ø31.8mm Dartmoor Roots Dartmoor Roots 16.45kg

3


FREERIDE/DOWNHILL geometry reach stack (mm) (mm) SHORT LONG

400 430

592 592

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

410 410

520 558

560 590

430 430

HT HT ST BB (mm) angle angle drop 115 115

64o 64o

75o 75o

–5 –5

WB wheel (mm) size 1170 1200

27.5” 27.5”

hub size 150x12 150x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount

max. rotor size (mm) PM 160mm 203 PM 160mm 203

NEW!

2016 upgrades (comparing to Roots Grey Angel 2015): – 27.5” wheels, – Rock Shox Boxxer fork, – Rock Shox Kage RC rear shock, – 9 speed, – Avid DB5 brakes, – Kenda Honey Badger DH Pro tires – new version of Trail saddle

4

SHORT LONG

400 430

592 592

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

410 410

520 558

560 590

430 430

HT HT ST BB (mm) angle angle drop 115 115

64o 64o

75o 75o

–5 –5

WB (mm)

wheel size

hub size

1170 1200

26” 26”

150x12 150x12

headset BB type type (mm) (S.H.I.S) IS42/IS52 Euro73 IS42/IS52 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount

max. rotor size (mm) PM 160mm 203 PM 160mm 203

ROOTS GREY ANGEL

ROOTS BLACK ANGEL

Roots is a non–compromise gravity machine for the hardcore purposes. Tough freeride and downhill tracks, huge drops and the biggest dirts – this is its natural environment. The Roots frame was used by our best rider Szymon Godziek to perform his legendary runs in the biggest gravity event of the world – the famous Red Bull Rampage, where he jumped smoothly twice a huge backflip over the 22 meters canyon. Roots Black Angel is equipped with the hi–end suspension coming from Rock Shox – dual crown Boxxer RC fork and Kage RC coil rear shock. The other high quality parts include Avid hydraulic disc brakes with 8” rotors, integrated Dartmoor Rage v.2 stem, Dartmoor Tornado bars and 27.5” wheels with Dartmoor Revolt hubs.

geometry reach stack (mm) (mm)

frame: frame size: wheel size: fork: shock: headset: derailleur: shifter : brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: weight:

Black Angel, alu 7005, travel 200mm Long, Short 27.5” Rock Shox Boxxer RC CL 27.5”, travel 200mm, axle 20mm, tapered Rock Shox Kage RC, 222/69mm, spring 550 integrated IS42/IS52 SRAM X5 SRAM X4, 9–speed Avid DB5, rotors 200mm Samox AF15–ISIS, 36T SRAM PG–920 11–34 Dartmoor Stream OEM Shining DB–30 27.5”, 32H front: Dartmoor Revolt Disc 20, 32H rear: Dartmoor Revolt Cassette 150x12, 32H Kenda Honey Badger DH Pro 27.5x2.40 Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Rage v.2, Ø31.8mm Dartmoor Roots Dartmoor Trail 17.50kg

Roots is a non–compromise gravity machine for the hardcore purposes. Tough freeride and downhill tracks, huge drops and the biggest dirts – this is its natural environment. The Roots frame was used by our best rider Szymon Godziek to perform his legendary runs in the biggest gravity event of the world – the famous Red Bull Rampage, where he jumped smoothly twice a huge backflip over the 22 meters canyon. Roots Grey Angel is equipped with the strong Marzocchi Bomber 888 CR 200mm travel dual crown fork, Marzocchi Coil R rear shock, Avid hydraulic disc brakes with 8” rotors, integrated Dartmoor Rage v.2 stem, Dartmoor Tornado bars and strong 26” wheels with Dartmoor Revolt hubs. Model continued from 2015

frame: frame size: wheel size: fork: shock: headset: derailleur: shifter : brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: weight:

Grey Angel, alu 7005, travel 200mm Long, Short 26” Marzocchi 888 CR, travel 200mm, axle 20mm, 1–1/8” Marzocchi Coil R, 222/69mm, spring 450 integrated, IS42/IS52 rear derailleur: SRAM X5 SRAM X4, 8–speed Avid DB1, rotors 203mm Samox AF15–ISIS 36T SRAM PG–820 11–32 Dartmoor Stream Shining DB–30 26”, 32H front: Dartmoor Revolt Disc 20, 32H rear: Dartmoor Revolt Cassette 150x12mm, 32H Kenda Nevegal Sport 26x2.5 Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Rage v.2, Ø31.8mm Dartmoor Roots Dartmoor Roots 18.39kg

5


ENDURO/FREERIDE geometry reach stack (mm) (mm) SHORT LONG

410 440

584 584

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

406 431

535 565

552 582

419 419

HT HT ST BB (mm) angle angle drop 115 115

65o 65o

76o 76o

–4 –4

WB wheel (mm) size 1150 1180

27.5” 27.5”

hub size 135x12 135x12

headset BB type type (mm) (S.H.I.S) IS42/IS52 Euro73 IS42/IS52 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount

max. rotor size (mm)

PM 160mm PM 160mm

203 203

6

410 440

584 584

TT (mm)

eTT (mm)

CS (mm)

406 431

535 565

552 582

419 419

HT HT ST BB (mm) angle angle drop 115 115

65o 65o

76o 76o

–4 –4

WB wheel (mm) size 1150 1180

26” 26”

hub size 135x12 135x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount

max. rotor size (mm) PM 160mm 203 PM 160mm 203

WISH BIKEPARK

WISH ENDURO

2016 upgrades (comparing to Wish Enduro 2015): – new Rock Shox Yari fork, – Rock Shox Monarch Plus rear shock, – 11 speed, – new SRAM GX 1x11 rear derailleur/shifter, – new SRAM 10–42T cassette – new SRAM GX 1000 crankset with X–Sync 30T narrow–wide chainring, – Avid DB5 brakes, – new Dartmoor Sniper rims, – Kenda Nevegal–X Pro series folding tires, – integrated version of Kind Shock E–TEN dropper, – new version of Trail saddle

SHORT LONG

ST (mm)

NEW!

NEW!

Wish Enduro is the most versatile full suspension bike in Dartmoor 2016 family. This bike is able to handle all conditions – both up and downhills as well as more technical sections, jumps and drops at bikeparks around the world. Air suspension by Rock Shox is responsible for your riding comfort with brand new 27.5” wheel Yari RC fork and Monarch Plus R rear shock with piggyback. Dartmoor Wish Enduro is also built with 27.5” new Sniper wheels based on Revolt hubs, SRAM GX 11–speed drive and Avid DB5 disc brakes. Adjustable Kind Shock E–TEN I seat post is also one of the key features of every outstanding Enduro toy.

geometry reach stack (mm) (mm)

frame: frame size: wheel size: fork: shock: headset: derailleur: shifter : brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle : seat post: weight:

Pearl Black/Turquoise, alu 7005, travel 170mm Long, Short 27.5” Rock Shox Yari RC 27.5”, travel 170mm, axle 15mm, tapered Rock Shox Monarch Plus R DebonAir High Volume 216/63mm integrated IS42/IS52 SRAM GX 1X11 SRAM GX 11–speed Avid DB5, rotors 180mm SRAM GX 1000 24mm X–Sync 30T SRAM XG–1150 10–42 Dartmoor Stream OEM Dartmoor Sniper 27.5”, 32H front: Dartmoor Revolt Disc 15, 32H rear: Dartmoor Revolt Cassette 135x12mm, 32H Kenda Nevegal–X Pro 27.5x2.35, folding Dartmoor Nitro FR 780mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Kind Shock E–TEN Integrated, Ø31.6mm 14.95kg

Wish Bikepark will be your best friend for all upcoming trips if jumping at bikeparks, riding A–lines and technical singletracks is what you are really looking for. Comfortable suspension is based on Rock Shox fork – 170mm travel Yari and Marzocchi Roco rear shock . Other key equipment for gravity stunts contains 26” wheels with Dartmoor Revolt hubs, hydraulic Avid DB1 brakes and SRAM X7 derailleur with short cage. Wish in Bikepark specs is a perfect solution for everyone starting their mountain adventures as well as advanced riders looking for reliable, complete bike. Eye–catching Miami Vice color line will keep other riders and girls attention even after the riding hours … 2016 upgrades (comparing to Wish Bikepark 2015): – new Rock Shox Yari fork, – Piggyback vesion of Marzocchi Roco Coil R rear shock, – 9 speed, – SRAM X7 derailleur, – SRAM 11–34T cassette, – Pro version of Kenda Nevegal tires, – new version of Trail saddle

frame: frame size: wheel size: fork: shock: headset: derailleur: shifter: brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: weight:

Pearl Black/Miami Vice, alu 7005, travel 170mm Long, Short 26” RockShox Yari RC 27.5”, travel 170mm, axle 15mm, tapered Marzocchi Roco Coil R w/Piggyback, 215/63mm, spring 450 integrated IS42/IS52 SRAM X7 SRAM X4 9–speed Avid DB1, rotors 203mm Samox AF15–ISIS 34T SRAM PG–920 11–34 Dartmoor Stream OEM Shining DB–30 26”, 32H front: Dartmoor Revolt Disc 15, 32H rear: Dartmoor Revolt Cassette 135x12mm, 32H Kenda Nevegal Sport 26x2.35 Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Fury v.2, 45mm, Ø31.8mm Dartmoor Maze Dartmoor Trail 16.10kg

7


ENDURO/FREERIDE geometry reach stack (mm) (mm) MEDIUM LARGE

400 430

620 620

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

406 457

576 596

590 621

426 426

HT HT ST BB (mm) angle angle drop 115 115

66.5o 66.5o

73o 73o

28 284

WB wheel (mm) size 1130 1160

27.5” 27.5”

hub size 135x12 135x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount IS IS

max. rotor size (mm) 203 203

NEW!

HORNET BLACK PEARL

Hornet is the toughest of all the hardtail bikes in Dartmoor family. Perfect for singletracks, bikeparks and making your own ways in the rough terrain where no marked trails exist. All these Enduro and All Mountain rides are not a big deal for this bike based on bulletproof Dartmoor Hornet frame equipped with 150mm travel Suntour Auron fork, 1x10 drivetrain with 34T narrow-wide chainring, 11-42T cassette, Avid DB-1 hydraulical brakes and strong 27.5” wheels is versatile enough for riding in all conditions. If you think that Primal bikes are not tough enough players for you then try our Hornet !

frame: frame size: wheel size: fork: headset: derailleur: shifter : brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle : weight:

8

Pearl Black/Mirror Silver , alu 7005 Large, Medium 27.5” Suntour Auron LO–RC 27.5, travel 150mm, axle 15mm, tapered integrated IS42/IS52 SRAM X-5 SRAM X-5 10–speed Avid DB1, rotors 180mm Samox AF15–ISIS narrow–wide Trail OEM 34T Sunrace MS3 11–42T, black Dartmoor Stream OEM Shining DB–30 27.5”, 32H front: Dartmoor Revolt Disc 15, 32H rear: Dartmoor Revolt Cassette 135x12mm, 32H Kenda Nevegal Sport 27.5x2.35 Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Fury v.2, 45mm, Ø31.8mm Dartmoor Maze Dartmoor Trail 14.50kg

9


ALL MOUNTAIN/ENDURO geometry reach stack (mm) (mm) SMALL MEDIUM LARGE

373 393 413

610 610 610

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

426 452 477

559 573 591

585 604 625

425 425 425

HT HT ST BB (mm) angle angle drop 115 115 115

67o 67o 67o

71o 71o 71o

30 30 30

WB stand (mm) -over (mm) 1085 780 1105 792 1125 803

wheel size 27.5” 27.5” 27.5”

hub size

headset BB type type (mm) (S.H.I.S) 135x10 IS42/IS52 Euro73 135x10 IS42/IS52 Euro73 135x10 IS42/IS52 Euro73

post diam. (mm) 31.6 31.6 31.6

clamp diam. (mm) 34.9 34.9 34.9

brake max. mount rotor size (mm) IS 180 IS 180 IS 180

NEW!

PRIMAL PRO RED DEVIL

Looking for a ride approved in all conditions? You should definitely check Primal Pro which is just perfect for mountain trips, demanding uphills, crazy downhills or rough terrain. This set was designed to meet all your expectations while exploring All Mountain and Enduro courses around the world. It is called “the fastest Enduro hardtail out there” since our Polish team rider – Olek Wieczorkiewicz – won the overall hardtail ranking in 2015 Enduro Trophy series. 2016 improvements like Rock Shox Revelation fork and 11–42T cassette made it even more versatile than ever before. Its specific bloody red finish fortunately didn’t need any changes as riders liked it a lot. This bike will allow you to get anywhere you want as long as you will have much power to handle this Red Devil! 2016 upgrades (comparing to Primal Pro 2015): – new Rock Shox Revelation fork, – Sunrace 11–42T cassette for better uphill riding, – Kenda Nevegal–X Pro series folding tires, – Kind Shock E–TEN dropper, – new version of Trail saddle

10

geometry reach stack (mm) (mm) SMALL MEDIUM LARGE

382 402 422

603 603 603

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

426 452 477

559 573 591

580 600 620

425 425 425

HT HT ST BB (mm) angle angle drop 115 115 115

68o 68o 68o

72o 72o 72o

38 38 38

WB stand (mm) –over (mm) 1085 780 1105 792 1125 803

wheel size

hub size

27.5” 27.5” 27.5”

135x10 135x10 135x10

headset BB type type (mm) (S.H.I.S) IS42/IS52 Euro73 IS42/IS52 Euro73 IS42/IS52 Euro73

post diam. (mm) 31.6 31.6 31.6

clamp diam. (mm) 34.9 34.9 34.9

brake mount IS IS IS

max. rotor size (mm) 180 180 180

NEW! frame: frame size: wheel size: fork: headset: derailleur: shifter: brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post: weight:

Red Devil, alu 6061 Large, Medium, Small 27.5” Rock Shox Revelation RL 27.5” , travel 140mm, axle 15mm, tapered integrated, IS42/IS52 SRAM X7 SRAM X5 10–speed Avid DB1, rotors 180mm Samox AF15–ISIS narrow–wide Trail OEM 32T Sunrace MS3 11–42T, black Dartmoor Stream OEM Shining DB–28 27.5”, 32H front: Dartmoor Revolt Disc 15, 32H rear: Dartmoor Vee–One 135x10mm QR, 32H Kenda Nevegal–X Pro 27.5x2.35 Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail OEM 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Kind Shock E–TEN R, Ø31.6mm 13.40kg

PRIMAL BASIC TURQUOISE

Primal Basic is a perfect choice for all of you who need as versatile bike as possible. Take it for a long trip in the mountains or a short ride in your local forest, try steep uphills and feel comfortable when riding down with a high speed. This frame was designed to meet all these All Mountain and Enduro challenges. Basic version of Primal bike is equipped with 27.5” double wall rims, 2x8 gears drive system, disc brakes and a strong Suntour XCR–32 fork. This bike will get you anywhere you would like to ride! 2016 upgrades (comparing to Primal Basic 2015): – Avid BB3 brakes, – new version of Trail saddle

frame: frame size: wheel size: fork: headset: rear derailleur: shifter: front derailleur: shifter: brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: weight:

Turquoise, alu 6061 Large, Medium, Small 27.5” Suntour XCR–32 LO–Coil 27.5, travel 120mm, axle 9mm, 1–1/8” integrated, IS42/IS52 SRAM X4 SRAM X4, 8–speed SRAM X4 SRAM X4, 2–speed SRAM BB3 mechanical, rotors 160mm Samox AF12–214SS–BG18 32T–22T w/bashguard SRAM PG–820 11–32 Dartmoor Candy Shining DB–28 27.5”, 32H front: 9mm QR, 32H rear: 135x10mm QR, 32H Kenda Honey Badger Sport 27.5x2.2 Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail OEM 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail 14.25kg

11


DIRT/STREET geometry reach stack (mm) (mm) 414

564

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

310

574

385

HT HT ST BB (mm) angle angle drop 115

69o

20

WB (mm)

wheel size

hub size

1070

26”

135x10

headset BB type type (mm) (S.H.I.S) EC34/EC49 Euro73

post diam. (mm) 27.2

clamp diam. (mm) 31.8

Based on the unbreakable and lightweight aluminium Two6Player frame it is equipped with one of the best dirt jump forks Marzocchi Bomber 55 Slope plus double wall rims, Micron stem, BMX crankset, micro drive system and hydraulic disc brake. Red Devil version of Two6Player Pro bike has frame and fork painted with the top class looking bloody red semi-transparent lacquer. Several world’s top riders use this frame at the FMB World Tour circus – like top European and best Czech rider ever Tomas Zejda. Model continued from 2015

12

414

564

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

310

574

385

HT HT ST BB (mm) angle angle drop 115

69o

20

WB (mm)

wheel size

hub size

1070

26”

135x10

headset BB type type (mm) (S.H.I.S) EC34/EC49 Euro73

post diam. (mm) 27.2

clamp diam. (mm) 31.8

brake max. mount rotor size (mm) IS 160

NEW!

TWO6PLAYER BLACK PEARL

TWO6PLAYER PRO RED DEVIL / MIAMI VICE Non–compromise dirt and slopestyle bike chosen by the best riders around the world looking for a high–end complete set.

geometry reach stack (mm) (mm)

brake max. mount rotor size (mm) IS 160

Our new and more affordable option of Two6Player based dirt jumping bike. frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: pedals: chain: hubs: rims: tires: handlebar: stem: grips: saddle: weight:

Red Devil; Miami Vice, alu 7005 Long 26” Marzocchi 55 CR Slope, travel 100mm, axle 20mm, tapered Dartmoor Blaze, EC34/EC49 Avid DB1, rotor 160mm Samox, 3–pcs, Cr–Mo 4130, Dartmoor Peacock 25T Dartmoor Candy Pro Dartmoor Core front: Dartmoor Revolt Disc 20, 32H rear: Dartmoor Revolt Singlespeed, 32H Shining DB–30 26”, 32H Kenda Kranium 26x2.1 Dartmoor Ice 700 mm, Ø25.4mm Dartmoor Micron, 30mm, Ø25.4mm Dartmoor Maze Dartmoor Fatty Combo, 27.2x200mm 11.88kg

Based on the unbreakable and lightweight aluminium Two6Player frame this Black Pearl Player is equipped with top positioned Marzocchi dirt fork – DirtJumper1 with tapered aluminium steerer and 20mm axle, double wall rims, Micron stem, BMX crankset, micro drive system and hydraulic disc brake. Black Pearl painting with eye-catching mirror silver stickers combined with black parts and black fork make together a true classic set. Several world’s top riders use this frame at the FMB World Tour circus – like top European and best Czech rider ever Tomas Zejda.

frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: pedals: chain: hubs: rims: tires: handlebar: stem: grips: saddle: weight:

Black Pearl/SIlver Mirror, alu 7005 Long 26” Marzocchi DJ1, travel 100mm, axle 20mm, tapered Dartmoor Blaze, EC34/EC49 Avid DB1, rotor 160mm Samox, 3–pcs, Cr–Mo 4130, Dartmoor Peacock 25T Dartmoor Candy Dartmoor Core front: Dartmoor Revolt Disc 20, 32H rear: Dartmoor Revolt Singlespeed, 32H Shining DB–30 26”, 32H Kenda Kranium 26x2.1 Dartmoor Ice 700 mm, Ø25.4mm Dartmoor Micron, 30mm, Ø25.4mm Dartmoor Maze Dartmoor Fatty Combo, 27.2x200mm 12.50kg

13


DIRT/STREET geometry

reach (mm)

stack (mm)

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

HT (mm)

HT angle

ST angle

BB drop

WB (mm)

wheel size

hub size

402

543

300

574

383

110

68.5o

0

1050

26”

135x10

headset BB type type (S.H.I.S) (mm) IS42/IS42 Spanish 68

post diam. (mm) 27.2

clamp brake max. diam. mount rotor size (mm) (mm) integrated IS 160

14

579

TT (mm)

eTT (mm)

CS (mm)

354

557

385

HT HT ST BB (mm) angle angle drop 115

70o

25

WB wheel (mm) size 1036

26”

hub size 135x10

headset BB type type (mm) (S.H.I.S) IS42/IS52 Euro73

post diam. (mm) 27.2

clamp diam. (mm) 31.8

brake max. mount rotor size (mm) IS 160

GAMER26 MIAMI VICE

Quinnie is a perfect bike even for the advanced riders. It is a professional set for dirt and street riding, equipped with high quality parts and based on a Cr–Mo frame with the same geometry as our top aftermarket frame Cody which was approved by the top FMB World Tour athlete – Szymon Godziek.

frame: frame size: wheel size: fork:

Quinnie is armed with professional Marzocchi Bomber DJ3 fork on 20mm axle, reinforced double wall rims, cr–mo BMX crankset and massive cockpit. Hydraulic disc rear brake and micro drive system should be another reasons to make you dreaming about our Red Devil Quinnie.

headset: rear brake: crankset: chainring: pedals: chain: hubs:

Model continued from 2015

403

ST (mm)

NEW!

QUINNIE RED DEVIL

Approved by our riders for all the best out there – demanding trails, technical skateparks and biggest pumptracks.

geometry reach stack (mm) (mm)

rims: tires: handlebar: stem: grips: saddle: weight:

Red Devil, Cr–Mo 4130 single size 26” Marzocchi DJ3, travel 100mm, axle 20mm, 1–1/8” integrated, IS42/IS42 Avid DB1, rotor 160mm Samox, 3–pcs, Cr–Mo 4130, Dartmoor Peacock 25T Dartmoor Candy Dartmoor Core front: Dartmoor Revolt Disc 20, 32H rear: Dartmoor Revolt Singlespeed, 32H Shining DB–30 26”, 32H Kenda Kranium 26x2.1 Dartmoor Storm Cr–Mo 4130, 700mm, Ø22.2mm Dartmoor Fury v.2, 35mm, Ø22.2mm Dartmoor Block Dartmoor Fatty Combo, 27.2x200mm 13.15kg

Gamer26 is a perfect choice for all of you looking for durable dirt jumping weapon at reasonable price. Strong Dartmoor Gamer frame, professional dirt jumping fork – Marzocchi Bomber DJ3 on board, 3–piece BMX cranks, strong double wall rims, strong bars, massive Dartmoor Fury stem, Avid DB-1 hydraulical brakes and Revolt Singlespeed rear hub with 10T driver and a cool looking micro drive represent a real core Dirt Jumping set. Approved for all basic and intermediate levels of dirt park, skate park and pumptrack riding ! Gamer’s geo is based on world’s most popular aluminium dirt jump frame – Dartmoor Two6Player. 2016 upgrades (comparing to Gamer26 from 2015): – Avid DB1 hydraulical brakes, – 3-pcs BMX crankset, – Revolt Singlespeed rear hub, – 25T chainring/9T driver micro drive – new version of Fatty Combo saddle

frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: pedals: chain: hubs: rims: tires: handlebar: stem: grips: saddle: weight:

Black Pearl/Miami Vice, alu 6061 single size 26” Marzocchi DJ3, travel 100mm, axle 9mm, 1–1/8” integrated IS42/IS52 Avid DB1, 160mm rotor Samox, 3–pcs, Cr–Mo 4130, Dartmoor Peacock 25T Dartmoor Candy OEM Dartmoor Core front: 9mm, 32H rear: Dartmoor Revolt Singlespeed, 32H Shining DB–30 26”, 32H Kenda K-Rad 26x2.3 Dartmoor Storm Cr–Mo 4130, 700mm, Ø22.2mm Dartmoor Fury v.2, 35mm, Ø22.2mm Dartmoor Evolution Dartmoor Fatty Combo, 27.2x200mm 12.70kg

15


DIRT/STREET geometry reach stack (mm) (mm) 403

579

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

354

557

385

HT HT ST BB (mm) angle angle drop 115

70o

25

WB wheel (mm) size 1036

26”

hub size

headset type (S.H.I.S)

BB type (mm)

post diam. (mm)

clamp diam. (mm)

brake mount

135x10

IS42/IS52

Euro73

27.2

31.8

IS

max. rotor size (mm) 160

NEW!

GAMER26 BASIC PETROL

Gamer26 Basic is one of two available for 2016 Gamer bike options designed for dirt jumping rookies. Idea behind this model is to make learning easy and keep it safe at the same time. Equipped with all stuff you need to hit your first doubles, pumptracks or local park sessions. This affordable set is based on durable Gamer frame, RST Dirt fork, Avid BB3 disc brakes, strong wheels and reliable cockpit which will keep your ride safe and comfortable in all conditions. Gamer’s geo is based on world’s most popular aluminium dirt jump frame – Dartmoor Two6Player. 2016 upgrades (comparing to Gamer24 Basic from 2015): – Avid BB3 brakes, – new version of Fatty Combo saddle

16

geometry reach stack (mm) (mm) 388

562

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

325

540

370

HT HT ST BB (mm) angle angle drop 115

70o

8

WB wheel (mm) size 1006

24”

hub size

headset type (S.H.I.S)

BB type (mm)

post diam. (mm)

clamp diam. (mm)

brake mount

135x10

IS42/IS52

Euro68

27.2

31.8

IS

max. rotor size (mm) 160

GAMER24 BASIC RED

frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: pedals: chain: hubs: rims: tires: handlebar: stem: grips: saddle: weight:

Petrol, alu 7005 single size 26” RST Dirt, travel 100mm, axle 9mm, 1–1/8” integrated IS42/IS52 Avid BB3, 160mm rotor Samox AF12-D32S 32T Dartmoor Candy OEM Dartmoor Core front: 9mm, 32H rear: singlespeed, freewheel 14T, 32H Shining DB–30 26”, 32H Kenda K-Rad 26x2.3 Dartmoor Storm Cr–Mo 4130, 700mm, Ø22.2mm Dartmoor Fury v.2, 35mm, Ø22.2mm Dartmoor Evolution Dartmoor Fatty Combo, 27.2x200mm 12.80kg

Basic bike in our offer for all the youngsters that would like to begin their gravity experience. Parks, trails and pumptracks are natural environment for Gamer. Short frame and 24” wheels were prepared for 140cm tall and over people. This bike is based on the strong alu frame with double wall rims, strong bars and massive Fury stem. Idea behind this model is to make learning easy and keep it safe at the same time. Model continued from 2015

frame: frame size: wheel size: fork: headset: rear brake: cranks: chainring: pedals: hubs: rims: tires: handlebar: stem: grips: saddle: weight:

Glossy Red, alu 6061 single size 24” RST Dirt, travel 100mm, axle 9mm, 1–1/8” integrated, IS42/IS52 Promax DSK–310 mechanical, rotor 160mm Samox AF12–D32S 32T Dartmoor Candy front: 9mm, 32H rear: singlespeed, freewheel 14T, 32H Shining DB–30 24”, 32H Kenda K–Rad 24x2.3 Dartmoor Storm Cr–Mo 4130, 700mm, Ø22.2mm Dartmoor Fury v.2, 35mm, Ø22.2mm Dartmoor Evolution Dartmoor Fatty Combo, 27.2x200mm 12.50kg

17


DIRT/STREET geometry

top tube length 20.6”

chain stay length 13.5”

head tube angle 75o

seat tube angle 71o

BB height 11.5”

seat tube height 8.25”

geometry 19.5” 20.6”

It features a 100% chromoly frame with integrated head tube, chromoly fork and handlebar, sealed hubs and ultra light Maxxis Grifter tires. Rikku comes in the stunning golden raw finish. The bike definetely stands out comparing to the other complete setups. Model continued from 2015

head tube angle 75o 75o

seat tube angle 71o 71o

BB height 11.5” 11.5”

seat tube height 8.5” 8.5”

OZZY BLOODY RED

frame: fork: headset: BB: crankset: chainring: chain pedals: rims: hubs: tires: handlebar: stem: grips: pegs: weight:

18

chain stay length 13” 13.5”

NEW!

RIKKU GOLDEN RAW

Rikku is a straight out of the box all round high quality complete bike, which definitely meets requirements of the advanced riders.

top tube length 19.5” 20.6”

DartBMX Rikku, Cr-Mo 4130, TT 20.6”, CS 13.5” DartBMX Rikku, Cr-Mo 4130 integrated, IS42/IS42 Spanish 19mm Samox, 3–pcs, Cr–Mo 4130, Dartmoor Peacock 25T Dartmoor Core 1/8” Dartmoor Cookie Shining, double wall, 36H front: 3/8” male axle, sealed bearings, 36H rear: DartBMX Sector OEM, RHD 9T driver, 36H front: Maxxis Grifter 20x2.1” rear: Maxxis Grifter 20x1.85” DartBMX, Cr-Mo 4130, rise: 8.25”, width: 28” alu front load, reach: 50mm DartBMX Block steel (1 pair), 38x110mm 10.50kg

Ozzy is our bike directed towards the youngest BMX riders. We designed it to meet their specific requirements – small geometry of the frame will make the bike control far more easier for those, who make their first steps into BMX world. With Ozzy you can have a strong bike equipped with many aftermarket parts in a truly affordable price. New version of Ozzy comes in a bloody red finish with all black parts. The bike is available again in two frame sizes, with 19.5” and 20.6” top tube length.

frame: DartBMX Ozzy, Cr-Mo 4130/Hi-Ten TT 19.5”/CS 13” and TT 20.6”/CS 13.5” fork: DartBMX Ozzy, Cr-Mo 4130/Hi-Ten headset: integrated, IS42/IS42 BB: Spanish 19mm crankset: Samox, 3–pcs, Cr–Mo 4130, chainring: steel 25T chain Dartmoor Core 1/8” pedals: Dartmoor Cookie rims: Shining, double wall, 36H hubs: front: 3/8” male axle, ball bearings, 36H rear: DartBMX Sector OEM, RHD 9T driver, 36H tires: Kenda K–Rad 20x2.125” handlebar: DartBMX, Cr-Mo 4130, rise: 8.25”, width: 28” stem: alu front load, reach: 50mm grips: DartBMX Block pegs: steel (1 pair), 38x110mm weight: 11.10kg

19


ENDURO/FREERIDE

FREERIDE/DOWNHILL geometry *calc. reach stack ST TT eTT CS HT HT ST BB WB max.tire **fork fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) size travel travel

hub size

headset BB post clamp type type diam. diam. (S.H.I.S) (mm) (mm) (mm)

brake mount

geometry *calc. reach stack ST TT eTT CS HT HT ST BB WB max.tire fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) size travel

**fork travel

hub size

headset type (S.H.I.S)

BB post clamp type diam. diam. (mm) (mm) (mm)

brake mount

front derailleur comp.

SHORT

200

400

592

410

520

560 430

115

64o

75o

-5

1170

27.5”x2.5” 180–200 150x12 IS42/IS52 Euro73 26”x2.5”

31.6

34.9. PM 160mm

no

SHORT

170

410

584

406

535

552

419

115

65o

76o

-4

1150

27.5”x2.35” 160–180 135x12 IS42/IS52 Euro73 26”x2.35”

31.6

34.9. PM 160mm

no

LONG

200

430

592

410

558

590 430

115

64o

75o

-5

1200

27.5”x2.5” 180–200 150x12 IS42/IS52 Euro73 26”x2.5”

31.6

34.9 PM 160mm

no

LONG

170

440

584

431

565

582 419

115

65o

76o

-4

1180

27.5”x2.35” 160–180 135x12 IS42/IS52 Euro73 26”x2.35”

31.6

34.9

no

* fork travel used for calculating the geometry showed in this table (in millimetres)

** recommended fork travel range (in millimetres)

NEW COLORS!

ROOTS

The Roots frame is dedicated for going big and rough, this frame is designed for the Downhill Freeriders that are rooted to the mountains. With 200mm of the progressive rear travel, this frame will transport you over any rock garden you can throw at it, while being stable enough to pull that sick whip on an A-Line. The design is well proven and is priced well to make this an ideal choice for anyone looking to custom build a sick rig. Roots can be run with either 27.5” or 26” wheels with the 150x12mm rear hub standard. The frame has a 73mm BB, ISCG-05 mount and tapered head tube for IS42/IS52 headsets. The rear shock has a 222x69mm size and seat post diameter is 31.6mm. The frame is equipped with the PM 160mm disc brake mount. During many months of testing the Roots has been run with both 180mm and 200mm forks and both felt great, the choice is yours. The frame comes in three color schemes: Red Devil, Black Angel and Grey Angel.

20

front derailleur comp.

colors: Red Devil (red clear coating with black stickers); Black Angel (pearl black with grey stickers) Grey Angel (pearl grey with black stickers) options: w/o shock; w/RS Kage RC coil shock (spring rate 550) sizes: Short; Long frame travel: 200mm shock size: 222x69mm bushing size: 22.2x8mm max. rotor size: 203mm weight: Short: 3.34kg (w/o shock); 4.34kg (w/ RS Kage); Long: 3.41kg (w/o shock); 4.41kg (w/ RS Kage)

* fork travel used for calculating the geometry showed in this table (in millimetres)

WISH

PM 160mm

** recommended fork travel range (in millimetres)

The second generation of this versatile full suspension frame. This new version can be used for Enduro or All Mountain, can be also Freerided or abused on the steep Downhill tracks. It has ability to run both 27.5” and 26” wheels and geometry makes climbing much easier. The frame will work with 135x12mm through axle hubs. Larger bearings at the rear pivot will make the frame really stiff. The custom designed hydroformed down tube makes the HT/DT connection much stronger now. For those wanting a more Enduro frame, the seat tube is now longer but the top tube is still low. New Wish will come now in two lengths and both of them are longer than the first generation frame. The perfect bike park frame just expanded its comfort zone to the high mountains! The new Wish comes in two color schemes: Black-Turquoise matching turquoise color line of our parts and Miami Vice with pearl black painting and our unique red and yellow color combination on the stickers.

colors: Black/Turquoise (pearl black with turquoise stickers); Black/Miami Vice (pearl black with miami vice stickers) options: w/o shock; w/RS Monarch Plus High Volume R air shock; w/RS Kage R coil shock (spring rate 500) sizes: Short; Long frame travel: 170mm shock size: 215x63mm bushing size: 22.2x8mm max. rotor size: 203mm weight: Short: 3.29kg (w/o shock); 3.61kg (w/ RS Monarch); 4.20kg (w/ RS Kage); Long: 3.35kg (w/o shock); 3.67kg (w/ RS Monarch); 4.26kg (w/ RS Kage)

21


depending on rider's height and riding style cm

160 165 170 175 180 185 190 195 200

m

l

enduro

freeride

enduro

freeride

HORNET 4X

HORNET

The most popular freeride hardtail frame is back since 2014 season with some cool improvements to make it even better for all you hardcore riders. If you love to hit drops, wall rides and rough terrain on a hardtail bike, the Hornet is the frame for you. On the rear you will find a 135x12mm through axle while hydroformed seat stays are stronger, stiffer and better looking for a proper abuse. Up front you get a fully integrated headset, which are shorter making it better for long travel forks, while giving a cleaner look. This frame is built for hardtail Freeride and aggressive Enduro. Being a more aggressive frame it comes in just two sizes: 16” and 18”. The new geometry is designed to cope with the dynamic of the 27.5” wheels or the agility of the classic 26” wheels – both will fit very well! geometry *calc. reach stack ST TT eTT CS HT HT ST BB WB max. tire **fork fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) size travel travel

colors: Red Devil; Pearl Black w/mirror stickers; Petrol Painted; Metallic Silver; Metallic Blue max. rotor size: 203mm sizes/weight: Medium (16”): 2.25kg Large (18”): 2.30kg

hub size

headset type (S.H.I.S)

BB post clamp brake front type diam. diam. mount derailleur (mm) (mm) (mm) comp.

HORNET MEDIUM

160

400

620

406

576

590 426

115

66.5o

73o

28

1130

27.5”x2.4” 120–170 135x12 IS42/IS52 Euro73 26”x2.4”

31.6

34.9.

IS

no

HORNET LARGE

160

430

620

457

596

621 426

115

66.5o

73o

28

1160

27.5”x2.4” 120–170 135x12 IS42/IS52 Euro73 26”x2.4”

31.6

34.9

IS

no

HORNET 4X

100

415

570

355

574

589 400

115

68o

73o

28

1076

31.6

34.9

IS

no

* fork travel used for calculating the geometry showed in this table (in millimetres)

22

size

4X/DUAL SLALOM

ENDURO/FREERIDE

hornet frame fitting

26”x2.4”

80–130 135x12 IS42/IS52 Euro73

Hornet 4X is the fusion between the stability and strength of the Dartmoor Hornet and the race proven geometry of our previous 4X machine, the Dartmoor Phantom. On the construction side it has the same new features as Hornet frame since 2014 edition, with a fully integrated low profile headset, new custom designed and stiffer rear triangle and strong 135x12mm through axle. And all this has been achieved while keeping this race machine at a lightweight level. The 400mm chain stays and a super stiff rear triangle make this bike amazing out of the gate, while being very snappy and agile to fight your way through the competition. The head angle points only one way, the finish line, plus the long top tube with 14” seat tube will suit the needs of the riders who shred them. Hornet 4X comes in only one size and is compatible with 26” wheels only. colors: Metallic Green; Metallic Red; Glossy Black max. rotor size: 160mm weight: 2.15kg

** recommended fork travel range (in millimetres)

23


PRIMAL 27.5" frame fitting

TRAIL/ALL MOUNTAIN

cm

160 165 170 175 180 185 190 195 200

*calc. reach stack ST TT eTT CS HT HT ST BB WB fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) travel

stand -over

max. tire size

**fork travel

hub size

headset BB post clamp brake type type diam. diam. mount (S.H.I.S) (mm) (mm) (mm)

140

390

625

400

573

581 420

120

67o

73o

40

1095

790

27.5”x2.35” 130–160 135x10 IS42/IS52 Euro73

30.9

34.9

IS

180

PRIMAL 27.5 M

140

415

625

456

595

606 420

120

67o

73o

40

1120

790

27.5”x2.35” 130–160 135x10 IS42/IS52 Euro73

30.9

34.9

IS

180

73

PRIMAL 27.5 L

140

440

625

482

616

631 420

120

67

40

1145

790

27.5”x2.35” 130–160 135x10 IS42/IS52 Euro73

30.9

34.9

IS

180

PRIMAL 27.5+ S

130

400

644

400

576

585 425

115

67o

74o

60

1125

795

27.5”x3.0” 120–150 148x12 IS42/IS52 Euro7 3

30.9

34.9

IS

180

PRIMAL 27.5+ M

130

425

644

456

605

610

425

115

67o

74o

60

1150

795

27.5”x3.0” 120–150 148x12 IS42/IS52 Euro73

30.9

34.9

IS

180

PRIMAL 27.5 L

130

450

644

482

626

635 425

115

67o

74o

60

1175

795

27.5”x3.0” 120–150 148x12 IS42/IS52 Euro7 3

30.9

34.9

IS

180

o

o

m

l

xc am (trail) enduro

xc am (trail) enduro

xc am (trail) enduro

NEW!

PRIMAL 27.5

Our most popular hardtail bike for trail riding has some big improvements for 2016 to make your riding experience even better. Lower front triangle geometry, based on re-shaped hydroformed tubes will make your bike stiffer and better looking. Dartmoor Primal is still available in 3 sizes so you can pick a perfect one for your height and riding style. We kept the popular 135x10mm hub standard for rear wheel. Primal became one of the most popular All Mountain/Trail hardtail frames in the past years. Why? You should try yourself with this cool looking new version of this frame and we guarantee you will be 110% satisfied! To make the seat tube stronger against any possible cracks which may happen when using long seat posts etc. in new Primal 27.5 frames there will be seat tube for 30.9mm seat posts, which is now popular standard as well.

s

max. disc

PRIMAL 27.5 S

NEW!

24

size

ENDURO/ALL MOUNTAIN

depending on rider's height and riding style

PRIMAL 27.5+

colors: Black/Grey; Red Devil; Black/Miami Vice; Turquoise/Black max. rotor size: 180mm sizes/weight: Small (16”): 2.10kg Medium (17”): 2.15kg Large (18”): 2.19kg

Bike industry prepared another interesting improvement for all the trails fans out there. Thanks to the brand new 27.5+ standard shredding rough lines with your hardtail will be even more comfortable now. Primal Plus is a refreshed version of our well known Dartmoor Primal frame for 27.5” wheels but compatible with 3.0 tires. Boost 148x12mm rear hub will keep your wider wheel even stronger and lowered bottom bracket is adjusting geometry to wider wheels. Lower front triangle geometry, based on re-shaped tubes will also make your bike stiffer and better looking. Dartmoor Primal Plus is available in 3 sizes so you can pick a perfect one for your height and riding style. To make the seat tube stronger against any possible cracks which may happen when using long seat posts etc. in new Primal 27.5+ frames there will be seat tube for 30.9mm seat posts, which is now popular standard as well.

colors: Red Devil; Black/Miami Vice max. rotor size: 180mm sizes/weight: Small (16”): 2.15kg Medium (17”): 2.20kg Large (18”): 2.25kg

25


depending on rider's height and riding style

TRAIL/ALL MOUNTAIN

depending on rider's height and riding style cm

size

160 165 170 175 180 185 190 195 200

s

m

l

cm

xc am (trail) enduro

xc am (trail) enduro

xc am (trail) enduro

m

size

160 165 170 175 180 185 190 195 200

l

xc am (trail) enduro

xc

TRAIL/ALL MOUNTAIN

PRIMAL 29" frame fitting

PRIMAL 27.5" frame fitting

am (trail) enduro

PRIMAL 29

PRIMAL 2015

colors: Black/Miami Vice; Black/Petrol Painted; Black/Red; Black/Blue max. rotor size: 180mm sizes/weight: Small (16’’): 2.12kg Medium (17”): 2.17kg Large (18”): 2.21kg

2015 version of our perfect hardtail All Mountain frame designed to run with 27.5” and 26” wheels. Built to meet the demands of the All Mountain riders and those who want to try some Enduro on the hardtail, this frame will be good for those long day trips or just thrashing your local singletrack. This beauty comes in three sizes: Small, Medium and Large. From the 2015 production Primals are ready to use both: low clamp and high clamp type front derailleurs.

geometry *calc. reach stack ST TT eTT CS HT HT ST BB WB **stan- max. ***fork fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) dover tire size travel travel (mm)

headset type (S.H.I.S)

BB post clamp brake front type diam. diam. mount derailleur (mm) (mm) (mm) comp.

PRIMAL SMALL

140

370

610

426

559 585 425

115

67o

71o

30

1085

780

27.5”x2.2” 120–160 135x10 IS42/IS52 Euro73 26”x2.35”

31.6

34.9.

IS

yes

PRIMAL MEDIUM

140

390

610

452

573 604 425

115

67o

71o

30

1105

792

27.5”x2.2” 120–160 135x10 IS42/IS52 Euro73 26”x2.35”

31.6

34.9

IS

yes

PRIMAL LARGE

140

415

610

477

591 625 425

115

67o

71o

30

1125

803

27.5”x2.2” 120–160 135x10 IS42/IS52 Euro73 26”x2.35”

31.6

34.9

IS

yes

PRIMAL29 MEDIUM

140

390

600

432

559 590 437

115

68o

71o

49

1160

766

29”x2.2” 100–140 135x10 IS42/IS52 Euro73

31.6

34.9

IS

yes

PRIMAL29 LARGE

140

420

600

483

582 620 437

115

68o

71o

49

1190

785

29”x2.2” 100–140 135x10 IS42/IS52 Euro73

31.6

34.9

IS

yes

* fork travel used for calculating the geometry showed in this table (in millimetres)

26

hub size

** standover for Primal frame calculated for 27.5” wheels

29ers bring a new feel to your ride - smoother, faster and quicker while still delivering when you hit your favourite trails. We offer two sizes - Medium with 17” seat tube and 590mm effective top tube and Large with 19” seat tube and 620mm eTT. Like its smaller brother, the Primal 29 offers stealth cable routing for those wishing to run a dropper post and smooth flush cable guides. The frame features the short chain stays and a proper head tube angle great for climbing, plus tapered head tube for integrated headset and a curved top tube with a standover height under 800mm to avoid any nasty accidents. From the 2015 production Primals29 are ready to use both: low clamp and high clamp type front derailleurs. colors: Red/Black; Dark Grey/Black max. rotor size: 180mm sizes/weight: Medium (17”): 2.17kg Large (19”): 2.26kg

*** recommended fork travel range (in millimetres)

27


DIRT/SKATEPARK

DIRT/SKATEPARK

TWO6PLAYER

From the very first day of Dartmoor-Bikes our goal was to create the most popular aluminium Dirt Jump frame in the world. Strong, light, affordable, with clean lines and geometry matching needs of even the most demanding riders. It was our priority to let the beginners ride on the same frames as the some of the best professionals in the world. Our 5th generation of Player frames can be found all over the world from Nepal to South Africa. In all these places where young riders dream to follow the best dirt jumpers like Tomas Zejda or just want to try their skills at local pumptracks. The frame is made from butted aluminum tubes and after we designed few years ago the new hydroformed down tube with special offset butting and shape formed to fit exactly the new tapered head tube the frame has now the outstanding durability. Not even one was broken since that time with thousands sold !!! The new colors in a 2015 line are Red Devil and pearl black with mirror silver stickers. Geometry of Two6Player was developed in cooperation with the world’s best DJ riders. There are two lengths of this frame LONG (Reach 414mm) and SHORT (Reach 385mm) to match perfectly the riders’ height and preferred riding style. So no more excuses – it is time to Play the game!

colors: Red Devil; Pearl Black with mirror silver sticker; Matt Black; Petrol painted; Miami Vice max. rotor size: 160mm sizes/weight: Short: 2.16kg; Long: 2.21kg

TWO4PLAYER

In 2015 we came back with the new version of Two4Player frame. Two4Player is now a true smaller brother of Two6Player frame as it is equipped also with the hydroformed down tube and tapered top tube. With these changes it should be as much unbreakable as the famous Two6Player. New Two4Player is available in pearl black and petrol painted colors.

geometry *calc. reach stack ST TT eTT CS HT HT ST BB WB max. **fork fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) tire size travel travel

hub size

headset type (S.H.I.S)

BB post clamp brake front type diam. diam. mount derailleur (mm) (mm) (mm) comp.

TWO6PLAYER SHORT

100

385

564

310 545

385

115

69o

20

1040 26”x2.35” 90–130 135x10 EC34/ZS49 EC34/EC49 Euro73 27.2

31.8

IS

no

TWO6PLAYER LONG

100

414

564

310

574

385

115

69o

20

1070 26”x2.35” 90–130 135x10 EC34/ZS49 EC34/EC49 Euro73 27.2

31.8

IS

no

TWO4PLAYER

100

387

550

300 548

370

115

69o

5

1016 24”x2.35” 80–120 135x10 EC34/ZS49 EC34/EC49 Euro73 27.2

31.8

IS

no

* fork travel used for calculating the geometry showed in this table (in millimetres)

28

colors: Pearl Black with mirror silver sticker; Petrol painted max. rotor size: 160mm weight: 2.10kg

** recommended fork travel range (in millimetres)

29


The best middle range Dirt Jump/Street frame for 26” wheels, perfect for all types of riders from amateur to pro. Made of butted, seamless Japanese Cr-Mo 4130 steel tubes. The Quinnie combines high quality level, modern design and perfect geometry. Quinnie comes now also with the stronger type of the integrated seat clamp.

STREET/SKATEPARK

DIRT/SKATEPARK

QUINNIE

colors: Pearl Black; Grey Angel max. rotor size: 160mm weight: 2.48kg

FREAKY

CODY / CODY TAPERED

Dirt Jumping technical miracle made of multiple butted, seamless Japanese Cr–Mo 4130 steel tubes. All the tubes are heat treated before welding. With super smooth dropouts, hydroformed chainstay, hourglass shaped BB and increased thickness in the most sensitive areas this frame is plain sick. That is why we used it to apply this very unique and expensive chemical coating we call petrol chrome plating and that is also why dirt jumping star Szymon Godziek picked it up as his weapon of choice.

Designed to share the love of Street and Park riding styles, Freaky will get you through the hardest gaps and drops you can think of. Geometry of Freaky is balanced between BMX and MTB frames. With a rear triangle of 365mm, seat tube of 255mm and the wheel base of 966mm, this is simply a trick machine! Meant to be ridden with a rigid fork, Spanish BB and the removable U-brake pivots it may looks like a plus size BMX but with 24” or 26” wheels. If you need a reliable friend to bomb the streets or skateparks, go for a Freaky one!

colors: Petrol chrome plated; Red Devil; Matt Black; Miami Vice max. rotor size: 160mm weight: 2.26kg

colors: Matt Black; Raw clear coated weight: 2.44kg

With increasing popularity of the tapered forks dedicated also for the Dirt Jumping we decided to extend the range of the Cody frames with a new option equipped with tapered head tube. Now you can use all the top dirt jumping forks with this new version of Cody which will be used by Szymon Godziek in 2016.

geometry *calc. reach stack ST TT eTT CS HT HT eST BB WB max. **fork fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) tire size travel travel (mm) cody

100

400

558

300

570

380 110

69o

cody tapered

100

400

558

300

570

380 110

69

* fork travel used for calculating the geometry showed in this table (in millimetres)

o

– –

15 15

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

post. clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

1040 26”x2.35” 80–110 135x10 IS42/IS42 Spanish 68 27.2 1040 26”x2.35” 80–110 135x10 IS42/EC44 Spanish 68 27.2

** recommended fork travel range (in millimetres)

integr. integr.

IS IS

geometry *calc. reach stack ST TT eTT CS HT HT BB WB fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle drop (mm) travel

no

quinnie

100

402

543

300

574

383

110

68.5o

0

no

ghetto

80

390

507

270

546

360

110

70o

-24

418

510

255

555

365

110

72.5o

5

freaky rigid

* fork travel used for calculating the geometry showed in this table (in millimetres)

30

max. **fork tire size travel (mm)

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

post. clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

1050 26”x2.35” 80–110 135x10 IS42/IS42 Euro 68

27.2

integr.

988

rigid 135x10 IS42/IS42 Spanish 24”x2.35” 60–100 68

27.2

integr. pivots

no

966

24”x2.1” 26”x2.1”

25.4

integr. pivots

no

rigid

110x14 IS42/IS42 Spanish 68

IS

no

** recommended fork travel range (in millimetres)

31


PARTS & ACCESORIES

PARTS & ACCESORIES colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Red anod.; Green anod.; Blue anod.; Violet anod.; White painted Ultra light pedals made of cold forged and CNC machined aluminium. Custom body shape with slim, height: 16mm flat profile. Cr–Mo steel axle. 2 sealed bearings and DU-bushing for perfect and smooth rotation. platform size: 90x100mm V.2 version comes with the extended axle to increase the Q-factor and riding comfort. Tightened with 15mm wrench or 8mm Allen key. Fevers come with 8 removable, black pins per side. weight: 395g

FEVER v.2 CNC pedals

CANDY PRO pedals

Plastic pedals got their bad reputation in the MTB scene due to the low reliability and crappy bearings combined with the high profile design. But now it changed with the Candy Pros! These nylon pedals look different from the first glance. Starting with a low, thin profile, sealed bearings and shark-tooth pins that will give a firm grip for every riding shoe. Why we use sealed bearings in “meant to be cheap” pedals? Well, it is easier to change just the nylon platform rather than dumping the whole construction. With Candy Pros you can do it even while your pedal is installed in the crank arm! Just take away the broken platform and put on a new one. We have platforms as spare parts in a full range of colors.

colors: Black; Red; Blue; Violet height: 18.5mm platform size: 111x105mm weight: 270g

COOKIE pedals

STREAM / STREAM PRO pedals

Lightweight alu die casted pedals with perfect grip and strong body design. Cr–Mo steel axle. 10 pins per side (6 removable). Available in two versions: Stream Pro - with sealed bearing and DU-bushing; Stream - with ball bearings. 32

Lightweight pedals made of nylon. Cr–Mo steel axle. Ball bearings. Knurled surface and 12 molded pins per side for maximum traction. colors: Red Devil; Miami Vice; Black painted; Turquoise painted; White painted height: 18mm platform size: 90x95mm weight: 445g

colors: Black; Red; Green; Blue; Violet; Orange; Graphite height: 23mm platform size: 90x95mm weight: 315g 33


NEW COLORS!

Top quality headset with integrated top and bottom parts. IS42/IS52 S.H.I.S. type. Ultra low profile top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. Fitting Roots, Wish, Hornet, Hornet 4X, Primal Plus, Primal, Primal 29 and Gamer frames. colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; Silver polished

FLASH headset

Top quality headset with external top part and zero stack (semiintegrated) bottom part. EC34/ZS49 S.H.I.S. type. Cups and top cover made of 2014 aluminium. Upper cup drilled for weight reduction with ultra low profile top cover. Bottom cup with integrated 1-1/8” reduction. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. Fitting Wish ‘12/’13, Shine, Two6Player, Hornet ‘12/’13 and Phantom ‘12/’13 frames. colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; Silver polished

NEW COLORS!

PRIME headset

BLAZE headset

Top quality headset with integrated top and bottom parts. IS42/ IS42 S.H.I.S. type. Top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. Fitting Cody, Ghetto, Quinnie and Freaky MTB frames and Thug, Nami and Yuki BMX frames. colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; Silver polished

Top quality headset with external top and bottom parts. EC34/EC49 S.H.I.S. type. Cups and top cover made of 2014 aluminium. Both cups drilled for weight reduction. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. Fitting Wish ‘12/’13, Shine, Two6Player, Hornet ‘12/’13 and Phantom ‘12/’13 frames. colors: Petrol chrome plated; Red Devil; Black anod.; Red anod.; Blue anod.; Silver polished

NEW!

ASTRO headset

Top quality headset with zero stack (semi-integrated) top and bottom parts. ZS44/ZS56 S.H.I.S. type. Cups and ultra low profile top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. colors: Black anod.; Red anod.; Blue anod.

top part bottom type part type (S.H.I.S) (S.H.I.S)

34

PARTS & ACCESORIES

PARTS & ACCESORIES

BLINK headset

fork steerer type

upper bearing size (mm)

bottom bearing size (mm)

upper ht bottom ht stem inside diam. inside diam. clamp (mm) (mm)

crown race top stack bottom seat diam. height stack height (mm) (mm) (mm)

HYBRID headset

Top quality headset with integrated top part and external bottom part. IS42/EC44 S.H.I.S. type. Ultra low profile top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. Fitting new Cody frame with tapered head tube. colors: Black anod.

weight (g)

blink

IS42

IS52

tapered/ standard 1-1/8”

41.8x30.5x8

52x40x8

42

52.1

28.6

39.79/30.015

5.4

0

72

prime

IS42

IS42

standard 1-1/8”

41.8x30.5x8

41.8x30.5x8

42

42

28.6

30.015

5.4

0

61

astro

ZS44

ZS56

tapered/ standard 1-1/8”

41x30.15x7

52x40x8

44

55.95

28.6

39.79/30.015

9

2.8

120

top part bottom type part type (S.H.I.S) (S.H.I.S) flash blaze hybrid

EC34 EC34 IS42

fork steerer type

upper bearing size (mm)

bottom bearing size (mm)

upper ht bottom ht stem inside diam. inside diam. clamp (mm) (mm)

crown race top stack bottom seat diam. height stack height (mm) (mm) (mm)

weight (g)

ZS49

standard 1-1/8”

41x30.15x7

41.8x30.5x8

33.95

49.61

28.6

30.015

12.7

2.8

109

EC49

tapered/ standard 1-1/8”

41x30.15x7

52x40x8

33.95

49.61

28.6

39.79/30.015

12.7

13.2

126

EC44

tapered/ standard 1-1/8”

41.8x30.5x8

52x40x8

42

44

28.6

39.79/30.015

5.4

14.3

107

35


PARTS & ACCESORIES

PARTS & ACCESORIES

CHARGE headset

Top quality headsets with external top and bottom parts. EC34/EC34 S.H.I.S. type. Cups and top cover made of 2014 aluminium. Both cups drilled for weight reduction. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. colors: Black anod.; Turquoise anod.; Green anod.; Blue anod.; Gold anod.; Graphite anod.; Silver polished

ROCK mtb cranks DIVE headset

SPIN headset

Top quality headset with zero stack (semi-integrated) top and bottom parts. ZS44/ZS49 S.H.I.S. type. Cups and top cover made of 2014 aluminium. Bottom cup with integrated 1-1/8” reduction. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. colors: Black anod.; Red anod.

Top quality headset with zero stack (semi-integrated) top part and external bottom part. ZS44/EC49 S.H.I.S. type. Cups and top cover made of 2014 aluminium. Bottom cup drilled for weight reduction. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. colors: Black anod.; Red anod

MTB cranks which fit well with our Freeride, All Mountain and Enduro frames. 2-pcs construction cranks with an integrated 24mm axle make them trustworthy and trouble-free in every condition. The 10-splines design combined with 2-bolt left arm guarantees a really strong connection. They come with a dedicated 36T aluminium chainring and an external bottom bracket fully compatible with the Shimano standard and frames with 68mm or 73mm BB shells. If you look for the entry level MTB cranks that will not ruin your budget and will look really cool in your bike – Rock is for you!

NEW!

BEARINGS

TOP CAP

High quality precision sealed 45/45 Angular Contact Bearings (ACB) with anti-rust titanium coating in golden color. With special high density grease protecting against water penetration. Available also in option with blue titanium coating with special feature including two ceramic balls for better dirt removing. sizes/weight: 41x30.15x7mm - 20g 41.8x30.5x8mm - 24g 52x40x8mm - 32g

Our custom designed top cap with Ride Your Way logo. Bolt and star nut included. colors: Petrol chrome plated; Red Devil; Black anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod. weight: 23g (with bolt and star nut).

top part bottom type part type (S.H.I.S) (S.H.I.S) charge dive spin

36

EC34 ZS44 ZS44

EC34 ZS49 EC49

fork steerer type

upper bearing size (mm)

bottom bearing size (mm)

standard 1-1/8” standard 1-1/8” tapered/

41x30.15x7 41x30.15x7 41x30.15x7

41.8x30.5x8 41.8x30.5x8 52x40x8

upper ht bottom ht stem inside diam. inside diam. clamp (mm) (mm) 33.95 44 44

33.95 49.61 49.61

28.6 28.6 28.6

crown race top stack bottom seat diam. height stack height (mm) (mm) (mm) 30.015 30.015 39.79

12.7 9 9

13.1 2.8 13.2

weight (g) 99 142 122

colors: Black anod.; Red anod.; Turquoise anod. arms lenght: 175 mm spindle: 24mm splines: 10 spindle bolt: M18xP1.0 weight: 915g (without external bearings)

SIMPLE chain guide

TRAIL chain guide

Chain guides do not need to cost more than your whole drive train. Lightweight and durable Trail chain devices are the perfect examples of this. They are built for the proper FR and DH abuse. With aluminium body plus the ability to bolt on a bashguard, this guide will take care of things when you hit the trails! Cages are compatible with 10-speed drivetrains. It is available in two options: Trail One including bashguard and Trail Two without bashgaurd but ready to add it. BB adapter is not included just available as spare part. As spares you can buy also: upper/bottom cage, bashguard with alu bolts and backplates. colors: options: size: weight:

Black anod.; Turquoise anod.; Red anod.; Orange anod. ISCG-05; ISCG-OLD (ISCG-03) 32T-42T 189g (Trail One); 143g (Trail Two)

Single lower arm chain guide with CNC holes pattern in backplate for weight reduction. Backplate made of aluminium. Roller with sealed bearing. Together with bashguard may be used for double chainring drive. BB adapter is not included. colors: Black anod.; Red anod. options: ISCG-05; ISCG-OLD (ISCG-03) weight: 95g (ISCG-05); 85g (ISCG-OLD)

KEEPER The Keeper does what is says on the box, it keeps the chain on. It is a simple idea for those who want to run a single ring. Compatible with the 31.8 and 34.9 mm seat tube diameters. colors: Black anod. weight: 44g 37


NEW SIZE!

PARTS & ACCESORIES

TRAIL narrow-wide chainring One of the lightest MTB narrow-wide chainrings on the market. Made of the 7075 aluminium with fully CNC machining. Trail chainring is compatible with 11-speed drivetrains and thanks to the special teeth shape it may be used as a single chainring without a chain guide. From 2016 Trail chainring will be available also in 30T size which is becoming so popular now. colors: Petrol chrome plated; Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.; Orange anod.; Graphite anod. sizes: 30T; 32T; 34T; 36T BCD: 104mm thickness: 4mm weight: 36g (32T); 45g (34T); 57g (36T)

NEW!

COG 42T 42T cog designed for 1x10 drivetrains in Enduro bikes to extend the gear range when replacing one of the smaller cogs (usually 17T). Made of alu 7075. Spacer included to work with both Shimano and Sram cassettes. colors: Black anod.; Turquoise anod.; Red anod. size: 42T weight: 85g

NEW COLORS!

THORN MTB/BMX 2-pcs cranks

TOTEM mtb chainring Lightweight MTB chainring made of high quality 7075–T6 aluminium. Fully CNC machined. Up to 30%-40% lighter than 6061 aluminium chainrings.

38

colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; White painted sizes: 32T; 34T; 36T; 38T BCD: 104mm thickness: 4mm weight: 40g (32T); 50g (34T); 63g (36T); 79g (38T)

2-pcs design cranks made of heat-treated Cr–Mo 4130 steel with 22mm spindle and 48 splines. RHD/LHD compatible. Two sprocket holes to fit all sprocket sizes. Small gusset to make the pedals assembly area stronger. Includes arms, spindle (welded to the right arm), 2 spindle bolts (alu 7075–T6 and Cr–Mo), 2 sprocket bolts (bigger one is hollow) and assembly/disassembly tool. Available with two spindle lengths: – 160mm (Thorn MTB) designed to work with Euro external bearings (like Dartmoor Euro eX BB 22mm) with 68mm or 73mm BB shells to create an extra strong and efficient combination with frames like Two6Player; – 150mm (Thorn BMX) perfectly working with Spanish or MID BB equipped frames as well as standard Euro BB to minimize number of required spacers for such kind of frames and keep correct chain line.

colors: Petrol chrome plated; Red Devil; Matt Black; Brushing chrome plated arms lenght: 170mm spindle: 22mm hollow splines: 48 spindle bolt: 5/8”x24T (8mm Allen key) weight: 745g (with alu spindle bolt) 763g (with Cr–Mo spindle bolt)

39


Keipo are our 3-pcs design cranks made of heat-treated 100% Cr–Mo 4130 steel. They are RHD/ LHD compatible and have two sprocket holes to fit all sprocket sizes. They come with small gusset to make the pedals assembly area stronger. Set includes arms, spindle, Cr–Mo spindle bolts, 2 sprocket bolts and pinch bolts. Alu spindle bolts are available as separate spare parts. Keipo eX are the special version of Keipo cranks dedicated for those who have frames with Euro BB shell – like Two6Player – and have faced many problems with weak standard Euro bearings. Keipo eX brings a solution to this problem. With much bigger bearings offered by the external Euro bearings, you get the strength of a Spanish BB while keeping the ease of fitting any normal Euro bottom bracket. Keipo eX comes in a set with longer spindle and a set of external Euro bearings while Keipo cranks are equipped with standard spindle length to fit standard Euro bearings which are not included with cranks .

FLARE bmx 2.5-pcs cranks

Light and strong 2.5–pcs cranks made of heat-treated Cr–Mo 4130 steel with 19mm spindle and 48 splines. RHD/LHD compatible. Two sprocket holes to fit all sprocket sizes. Small gusset to make the pedals assembly area stronger. Includes arms, spindle (pressed into the right arm), Cr–Mo spindle bolt, 2 sprocket bolts (bigger one is hollow) and assembly tool. colors: arms lenght: spindle: splines: spindle bolt: weight: 40

Matt Black; Matt Red; White painted 170mm 19mm hollow 48 M12x1mm (6mm Allen key) 814g

PARTS & ACCESORIES

PARTS & ACCESORIES

KEIPO EX / KEIPO bmx 3-pcs cranks

colors: Keipo: Matt Black; Matt Blue Keipo Ex: Matt Black; Raw clear coated arms lenght: 175mm spindle: 19mm hollow splines: 16 spindle lenght: Keipo: 138mm Keipo Ex: 148mm spindle bolts: M12x1mm (6mm Allen key) pinch bolts: M6x1mm weight: Keipo: 835g Keipo Ex: 995g (including Euro eX BBs)

STAR bmx cnc sprocket

The Star sprocket will really set off your dream build, with its cool flowing lines nicely CNC machined from a block of 7075 aluminium. This high end sprocket with 10 spokes design will come in a set with alu adapters for both most popular spindle diameters. colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Red anod. sizes: 23T; 25T; 28T; 33T teeth: 1/8” bore: 15/16” thickness: 6mm adapter: 19mm and 22mm included weight: 56g (23T); 66g (25T); 80g (28T); 97g (33T)

PEACOCK bmx sprocket

Peacock sprocket is a perfect example of the affordable parts from our collection which will not ruin your budget but will give you a comfort of riding the safe and tested bike stuff. The Peacock is a strong aluminium sprocket made of the stamping mold with CNC machined teeth. colors: Black anod.; Turquoise anod; Green anod.; Red anod.; Violet anod. sizes: 25T; 28T teeth: 1/8” bore: 15/16” thickness: 6.35mm adapter: 19mm included weight: 78g (25T); 84g (28T)

TRANCE bmx cnc sprocket CHUKKA TWO bmx cranks 3–pcs design reliable, entry level cranks made of 100% Cr–Mo 4130 steel seamless tubes. Includes arms, spindle, Cr–Mo spindle bolts, sprocket bolt and pinch bolts. colors: Matt Black; White painted arms lenght: 175mm spindle: 19mm splines: 8

spindle lenght: spindle bolts: pinch bolts: weight:

145mm M8x1.25mm M7x1.0mm 1100g

Fully CNC machined sprocket made of 7075–T6 aluminium with 8 spokes design. It comes in a set with alu adapters for both most popular spindle diameters. colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Graphite anod. sizes: 23T; 25T; 28T teeth: 1/8” bore: 15/16” thickness: 6mm adapter: 19mm and 22mm included weight: 56g (23T); 65g (25T); 90g (28T)

41


PARTS & ACCESORIES

REVOLT 27.5” wheels

CORE LIGHT chain

Super strong hi-end gravity 27.5” wheels based on our top quality level Revolt v.2 rims. Perfect for Freeride/Enduro/All Mountain - also for those who show no mercy to their wheels! Rear wheel is equipped with our aftermarket Revolt Cassette hub with 4 sealed bearings with both pairs of cones included - for 135x12mm and 142x12mm hub spacing standards. Front wheel is equipped with our aftermarket Revolt Disc 15 hub with 2 sealed bearings. Available in 2 color options: matt black or red devil. size: 27.5”; holes: 32; weight rear wheel: 1144g; weight front wheel: 1048g.

Lightweight nickel-plated chain with hollow pins and drilled side plates. Masterlink included. Nano-coated color options. colors: Silver; Green metallic; Red metallic; Blue metallic; Violet metallic; Orange metallic lenght: 102 links width: 1/8” tensile strength: 12750N weight: 226g (for 72 links)

NEW!

SNIPER 27.5” wheels

Lightweight and super cool looking 27.5” Enduro/Trail/All Mountain wheels based on our new Sniper rim. Rear wheel is equipped with our aftermarket Revolt Cassette hub 4 sealed bearings with both pairs of cones included - for 135x12mm and 142x12mm hub spacing standards. Front wheel is equipped with our aftermarket Revolt Disc 15 hub with 2 sealed bearings. Available in 2 color options: matt black or matt turquoise anodized. size: 27.5”; holes: 32; weight rear wheel: 1040g; weight front wheel: 944g.

PARTS & ACCESORIES

NEW!

CORE chain

Strong chain with drilled top side plates. Masterlink included. Painted color options including new deep black color version called Titanium Black. colors: Silver; Titanium Black; Black painted; Red painted; Green painted; Blue painted; Violet painted; White painted lenght: 102 links width: 1/8”; 3/32” tensile strength: 12750N weight: 276g (for 72 links)

PRO BB

Pro Series of our bottom bracket bearings available in Euro eX, Euro, Spanish and MID standards in both sizes: 19mm and 22mm. Pro series BBs include top quality bearings and refined cones that reduce the amount of spacers needed for installation. Two inner sleeves for 68mm and 73mm shells and a set of alu spacers included. diameter: 19mm; 22mm weight: Euro eX: 159g (19mm); 139g (22mm); Euro: 127g (19mm); 93g (22mm); Spanish: 117g (19mm); 86g (22mm); MID: 168g (19mm); 154g (22mm) 42

INTRO BB

Intro Series of our bottom bracket bearings available in Euro, Spanish and MID standards in 19mm size. Our Intro series BBs are dedicated for the entry level riders with affordable price. Two inner sleeves for 68mm and 73mm shells and a set of spacers included.

diameter: 19mm weight: Euro: 142g; Spanish: 135g; MID: 184g

NEW!

SHIELD 26” wheels

Super strong 26” wheels based on our new Shield rims. Perfect for Dirt Jumping/Slopestyle/Skatepark riding! Rear wheel is equipped with our aftermarket Revolt Singlespeed hub with 5 sealed bearings and 10T driver. Front wheel is equipped with our aftermarket Revolt Disc 20 hub with 2 sealed bearings. Available in 2 color options: matt black or red devil. size: 26”; holes: 32; weight rear wheel: 1127g; weight front wheel: 1031g.

NEW!

AIRCRAFT 27.5+ wheels

Based on our new Aircraft rim we offer you now also a set of 27.5”+ wheels. Rear wheel is equipped with Boost standard 148x12mm cassette hub with 4 sealed bearings. Front wheel is equipped with Boost standard 110x15mm hub with 2 sealed bearings. With these wheels you can use up to 3.0 wide tires and mount them in our brand new Primal Plus frames or any other 27.5+ frame which is quickly coming very popular standard in the gravity biking world. size: 27.5+; holes: 32; weight rear wheel: 1246g. weight front wheel: 1094g 43


Revolt in his first generation has proved to be a great rim. Second generation is even upgraded with stronger side walls for those who ride with lower pressure in their tyres. This hi-end gravity rim has our custom designed profile to cope with the most demanding requirements of Downhill, Freeride, Enduro, Dirt Jump and Street riding. Made using top quality 6066–T6 aluminium with a super strong sleeved joint connection. To combine the great performance with a perfect look for the Revolt v.2 we use hi-end water stickers and premium color options including black in perfect matt as well as Miami Vice and Red Devil to match many of our frames in these outstanding color schemes. Due to technological reasons black color rims come with eyelets while Miami Vice and Red Devil are offered without eyelets. colors: Red Devil; Miami Vice; Matt Black anod.; sizes: 27.5”; 26” holes: 36; 32 joint: sleeved outer width: 33.5mm

inner width: height: ERD: OSB: weight:

PARTS & ACCESORIES

PARTS & ACCESORIES

REVOLT v.2 rim

NEW!

SNIPER rim

Our new Sniper is definetely one of the best Enduro/All Mountain/Trail dedicated rims on the market! With sleeved joint connection, low weight, great stiffness, perfect durability, sexy look and really affordable price - Sniper should be the rim you are looking for your new wheels! Prototypes of this rim were the most popular choice by Dartmoor team riders in 2015.

27mm 22mm 559mm (27.5”); 534mm (26”); 1.7mm 619g (27.5”); 595g (26”)

colors: Matt Black anod.; Matt Turquoise anod.; holes: 32 Matt Green anod.; Matt Red anod.; joint: sleeved Matt Violet anod. outer width: 30.5mm sizes: 27.5”; 26”

inner width: 24mm height: 21mm weight: 515g (27.5”); 485g (26”)

NEW!

AIRCRAFT rim

SHIELD rim Our custom designed disc brake rim is dedicated for those gravity riders who prize the strength and durability above all, especially in affordable price. Shield is our back to the roots of the wide and strong rims dedicated for the most aggressive riding but thanks to the modern technology offered now in much lighter weight than years before. If you are looking for a new rim and the aggressive Freeride, Downhill or Dirt Jumping is your favourite kind of biking – check our Shield! The rim is made of the 6061–T6 aluminium with a strong sleeved joint connection. Thanks to the wide profile the tire stays safe on the rim even when riding through the tight berms with a low pressure. The thick side walls and wide lips minimize the pinch flat risk. Shield is available in wide range of colors including premium color lines like Red Devil or Miami Vice and in perfect matt anodized finishes. Due to technological reasons anodized rims come with eyelets while Miami Vice and Red Devil are offered without eyelets. 44

colors: Red Devil; Miami Vice; Matt Black anod.; Matt Turquoise anod.; Matt Green anod.; Matt Red anod.; Matt Violet anod. sizes: 27.5”; 26”; 24” holes: 36; 32 joint: sleeved outer width: 33mm inner width: 25.6mm height: 22mm ERD: 556mm (27.5”); 531mm (26”); 479mm (24”) OSB: 1.5mm weight: 633g (27.5”); 602g (26”); 550g (24”)

Aircraft is a rim almost as wide as an aircraft carrier lane. We can’t use the other one while mounting 3.0 tires dedicated for 27.5+ or 29+ wheels. It will fit all the other parts prepared for this brand new industry standard. Aircraft is not afraid of mountain trails, pathless tracks leading you to known as well as unknown places. 27.5 wheels were invented by people who want to be first - not on the starting list but in the places nobody ever reached before. No matter where you wanna go we guarantee that Aircraft won’t disappoint you!

colors: Matt Black anod.; Matt Turquoise anod.; holes: 32 Matt Red anod. joint: pinned sizes: 29”+; 27.5”+ outer width: 50mm

inner width: 45mm height: 17mm weight: 698g (27.5”+) 45


ROCKET v.2 rim

REVOLT PRO SINGLESPEED hub

Gravity rim aimed at the riders looking for a great value and strength without the weight penalty. It is designed to cope with many disciplines including Enduro, All Mountain, 4X and even Pumptrack. Second generation of Rocket rim looks great thanks to the hi-end water stickers and perfect matt anodizing finishes.

Absolutely hi-end ultralight MTB singlespeed rear hub. The hub is equipped with the 9T driver with patented Q-Lai drive transmission technology with 6 double independent pawls located in the hub body. This makes more space inside the driver for the bigger bearings. We use now high end Japanese EZO bearings with a special high density grease where the most externally positioned bearings are full contact sealed for even bettter waterproof performance. This makes our Revolt Pro Singlespeed a really smooth rolling and super strong hub. The 9T size driver works perfectly with 23T sprockets in a super cool looking microdrive.

colors: Matt Black anod.; Matt Turquoise anod.; Matt Green anod.; Matt Red anod.; Matt Violet anod. sizes: 29”; 27.5”; 26” holes: 32 joint: pinned

RAIDER rim

Very popular entry level rim used in the last 10 years by thousands of gravity riders. Perfect for all those who look for very affordable but still strong rim for Dirt Jump, Street, 4X, Enduro, Freeride or Downhill riding. Made of 6061 aluminium. Double wall construction with pinned joint. Available now also in 27.5” size.

outer width: inner width: height: ERD:

28mm 22.4mm 18.3mm 605mm (29”); 567mm (27.5”); 542mm (26”) OSB: 0.75mm weight: 584g (29”); 545g (27.5”); 518g (26”)

colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; White painted sizes: 27.5”; 26”; 24”; 20” holes: 36; 32 joint: pinned outer width: 31.4mm inner width: 24mm height: 21mm ERD: 562mm (27.5”); 537mm (26”); 485mm (24”); 384mm (20”) OSB: 1.5mm weight: 580g (27.5”); 550g (26”); 500g (24”); 405g (20”);

body: 6902 driver: 15268/6802 alu 6061–T6 15mm, hard anodized alu 7075–T6 hollow Cr–Mo 3/8”x24T, heat-treated alu 7075–T6, push–in (both sides)

driver: Cr–Mo 1-pcs, 9T pawls: 6 pawls design with 6 individual double springs engagement points: 30 holes: 36H; 32H weight: 380g

The affordable single speed driver rear hub featuring 5 precision sealed bearings, 15mm axle and push-in cones made of aluminium 7075 and Cr-Mo 3/8” hollow bolts. The 10T driver is equipped with strong teeth (1/8” standard) and 6 independent pawls. We use now bearings with a special high density grease better protecting against water penetration.

Popular strong rim for BMX, Dirt Jump and Street made of 6061 aluminium. Double wall construction with pinned joint and side wall for V-Brake or U-Brake.

46

bearings type: hub-shell: axle: bolts: cones:

REVOLT SINGLESPEED hub

FORTRESS rim

colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; White painted sizes: 26”; 24”; 20” holes: 36; 32 joint: pinned outer width: 32.4mm

colors: Black anod.; Turquoise anod.; Red anod. size: 135x10mm bearings: 5 EZO precision sealed bearings with high density grease

PARTS & ACCESORIES

PARTS & ACCESORIES

NEW!

inner width: 25mm height: 21mm ERD: 537mm (26”); 485mm (24”); 384mm (20”) OSB: 1.5mm weight: 670g (26”); 595g (24”); 485g (20”)

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod. size: 135x10mm bearings: 5 precision sealed bearings with high density grease bearings body: 6902 type: driver: 15268/6802 hub-shell: alu 6061–T6 axle: 15mm, hard anodized alu 7075–T6 bolts: hollow Cr–Mo 3/8”x24T, heat-treated

cones: alu 7075–T6, push–in (both sides) driver: Cr–Mo 1-pcs, 10T pawls: 6 pawls design with 6 individual springs

engagement points: 48 holes: 36H; 32H weight: 405g 47


REVOLT CASSETTE hub

If we just say that Revolt Pro Cassette hubs feature 6 big double pawls located in the hub body plus 4 top quality sealed bearings, alu 7075 cassette body, push-in cones, hard anodized alu 7075 axle and perfect sealing secured by a set of o-rings and lip seals, this is all true and great but for sure that is not everything. The Pro Cassette line supports all of the current mountainbiking standards - starting with the 135x10mm version (female version with 3/8” Cr–Mo hollow bolts) then 135/142x12mm version to use with a 12mm through axles in most of the modern Enduro/Freeride frames (there are two sets of cones included to easily convert the from 135mm to 142mm size) and 150x12mm version for Downhill machines, which can be easily converted to the 157x12mm standard after purchasing replaceable cones. But that is still not enough as these hubs can work also with SRAM’s XX1 drive - with our XX1 compatible cassette body you will be able to convert any of the Revolt Pro hub to run 11 gears in your bikes to follow your beloved pros! Finally what we do now is equipping Revolt Pro line with high end Japanese EZO bearings with a special high density grease where the most externally positioned bearings are full contact sealed for even bettter waterproof performance.

The affordable rear cassette hub featuring 4 precision sealed bearings, 15mm axle and push-in cones made of aluminium 7075. The lightweight alu 7075-T6 cassette is equipped with 6 pawls. We use now bearings with a special high density grease better protecting against water penetration. The Revolt Casasette hub comes in three different standards – 135x10mm female version with 3/8” Cr-Mo hollow bolts, 135x12mm version to use with a 12mm through axles – perfectly fitting our new Wish, Hornet and Hornet 4X frames and 150x12mm version. Furthermore 135x12mm version can be easily converted to 142x12mm standard and 150x12mm version can be converted to 157x12mm standard - all you need is the set of longer cones that are available separately. From 2016 we will offer this hub also in option with our SRAM XX1 compatible cassette body to use with SRAM 11-speed drivetrains.

colors: Black anod.; Red anod.; Silver polished axle: sizes: 150x12mm; 135/142x12mm; 135x10mm bolts: bearings: 4 EZO precision sealed bearings with high density grease cones: bearings body: 6902 cassette: type: driver: 15268/6802 hub-shell: alu 6061–T6

pawls: 15mm, hard anodized alu 7075–T6 hollow Cr-Mo 3/8”x24T, heat-treated (only engagement in 135x10mm female option) points: alu 7075–T6, push–in (both sides) holes: alu 7075-T6 (necessary to use freewheel weight: with alu spider), 9/10 speed; SRAM XX1 11 speed available as spare part

SRAM XX1 compatible cassette body

6 pawls design with 6 individual, double springs 30 36H; 32H 292g (150x12mm); 289g (135/142x12mm); 369g (135x10mm)

REVOLT PRO DISC 20 hub

48

hub-shell: alu 6061–T6 axle: 15mm, hard anodized alu 7075–T6 bolts: hollow Cr-Mo 3/8”x24T, heat-treated (only in 135x10mm female option) cones: alu 7075–T6, push–in (both sides) cassette: alu 7075-T6 (necessary to use freewheel with alu spider), 9/10 speed; SRAM XX1 11 speed available

SRAM XX1 compatible cassette body pawls: engagement points: holes: weight:

6 pawls with a single spring 24 32H 291g (150x12mm); 276g (135x12mm); 350g (135x10mm)

REVOLT PRO DISC 15 hub

Revolt Pro Disc 20 is the hi-end 20mm through axle front hub with the peak of technology and design combined together. This silent wonder will run smooth through any virgin terrain. The hub is equipped with high end Japanese EZO full contact sealed bearings with a special high density grease for even bettter waterproof performance. Revolt Pro Disc 20 is one of the lightest hubs dedicated for the gravity riding. Asymmetrical design with a bigger right side flange with lightweight cuts and a smaller left side flange together with perfectly clean lines put this hub among the best ones in his league.

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Red anod.; Silver polished. size: 110x20mm

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Red anod.; Orange anod. sizes: 150x12mm; 135x12mm; 135x10mm bearings: 4 precision sealed bearings with high density grease bearings body: 6902 type: driver: 15267/6902

PARTS & ACCESORIES

PARTS & ACCESORIES

REVOLT PRO CASSETTE hub

Revolt Pro Disc 15 hub is using the same top notch technology as the Pro Disc 20 version just this one is coming with the 15mm through axle standard. It is a perfect choice for all the All Mountain and Enduro riders. With the high end Japanese EZO full contact sealed bearings with a special high density grease this hub will not catch mud easily. High precision machining with tight tolerances make it a hub that will last for years.

bearings: 2 EZO precision sealed bearings with high density grease bearings type: 6804 hub-shell: alu 6061–T6

cones: alu 7075–T6 holes: 36H; 32H weight: 165g

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Red anod.; Silver polished. size: 100x15mm bearings: 2 EZO precision sealed bearings with high density grease bearings type: 6802 hub-shell: alu 6061–T6 cones: alu 7075–T6 holes: 36H; 32H weight: 160g 49


NEW!

NEW!

REVOLT DISC 20 / DISC 15 hubs

Revolt Disc 20 and the new one Revolt Disc 15 will be a choice for those who rather prefer affordable parts than the lightest ones. These 20mm and 15mm through axle hubs with the disc brake mounts have a body made of 6061 aluminium and are equipped with 2 good quality sealed bearings to ensure a long time and smooth spinning of your front wheel. We use now bearings with a special high density grease better protecting against water penetration.

colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.; Orange anod. size: 110x20mm (Revolt Disc 20); 110x15mm (Revolt Disc 15) bearings: 2 precision sealed bearings with high density grease bearings type: 6804 hub-shell: alu 6061–T6 cones: alu 7075–T6 holes: 36H; 32H weight: 205g (Revolt Disc 20); 180g (Revolt Disc 15)

PARTS & ACCESORIES

RAGE v.3 stem

This new version of our direct mount Rage stem comes for 2016 in a 35mm bar bore standard to fit our Lightning handlebar. Thanks to the half-integrated frontplate style we were even able to save some weight for you while still keeping the construction strong! Rage v.3 stem comes with beautiful combination of matt and polished anodizing

colors: Black anod.; Turquoise anod.; Red anod. bar bore: 35mm extension: 45-50mm weight: 129g

35mm

NEW!

SHORTY stem

REVOLT NON DISC 20 hub

50

Revolt Non Disc 20 is our front hub for those who know that the only brake they will use on the front wheel is their foot. The lack of disc rotor mounts makes it possible to give this hub some cool smooth lines. Both flanges are spaced wider now so the whole stiffness raised up and that is what we are looking for when developing new parts for dirt and street riders! The 20mm through axle fits well with the concept of the stiff, light perfectly working front hub. We use now bearings with a special high density grease better protecting against water penetration.

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.; Orange anod. size: 110x20mm bearings: 2 precision sealed bearings with high density grease bearings type: 6804 hub-shell: alu 6061–T6 cones: alu 7075–T6 holes: 36H; 32H weight: 168g

Times when ultra-short stems were only seen in the dirt jumping bikes are gone now when the new Enduro, All Mountain or Downhill frames become longer and longer. Shorty is our new super short stem dedicated for those Enduro and All Mountain riders who want to keep the balance closer to the back wheel and improve the turning skills. Shorty is also one of these parts that will add a unique style to your bike thanks to the special half-integrated frontplate construction.

colors: Black anod.; Turquoise anod.; Red anod.

31.8mm

bar bore: 31.8mm extension: 32mm; weight: 105g

51


31.8mm

Our hi-end downhill stem with adjustable extension and re-designed body. Direct Mount standard for dual crown forks. Made of cold forged and CNC machined 7075 aluminium. We added to this stem a special washers securing the stem against changing its position when hitting the ground strongly. colors: Black anod.; Turquoise anod.; Red anod.; Orange anod.

bar bore: 31.8mm extension: 45-50mm weight: 142g

TRAIL stem

31.8mm

With our experience in designing some of the most reliable stems for the hardcore users, we made something that suits those who are still in the gravity family but prefer endurance type of riding. That is how Trail stem came to life. Our aim was to offer a light but stiff stem so we went for an octagonal shape both on the inside and outside curves, what makes Trail stiffer than a regular stem, while looking like no other. It is designed for the 31.8mm bars and coming in two extension sizes: 50mm and 65mm. This stem will perfectly suit your next Trail, Enduro or All Mountain bike ! colors: Black anod.; Turquoise anod.; Red anod.; Blue anod.

bar bore: 25.4mm; 31.8mm extension: 35mm (25.4mm); 40mm (31.8mm)

bolts: 25.4mm: M6x18mm (x6); 31.8mm: M6x20mm (x4); M6x18mm (x2) weight: 148g (25.4mm); 170g (31.8mm)

MICRON stem

Micron is a minimalistic dirt jump and street stem for those who don’t like to keep their knees intake. Ultra light and short design accompanied with the proven stiffness and durability put Micron in the range of hi-end stems. The use of 4 bolts instead of 6 allowed us to lower the weight of the whole construction down to 145 grams. The Micron is made of 6066-T6 aluminium, with an extension of 30mm and made for 25.4mm bars only. If you like the smooth lines and trustworthy parts, the Micron is made for you!

NEW COLORS!

FURY v.2 stem

Used for all kinds of riding – from Dirt Jumping to heavy Freeride – Fury v.2 is one of the best “do it all” stems in our product range! Investing in cold forged technology made it to be not only stronger but also a lot more affordable than before! Our all-purpose gravity stem is available now also in the new 35mm diameter standard to match the size of the Lightning handlebar. Do you look for the super strong and eye catching cockpit? Go for the Fury 35mm with Lightning bars. extension: 35mm (25.4mm); 45mm (31.8mm, 35mm) bolts: 25.4mm: M6x18mm (x4); M6x22mm (x2); 31.8mm: M6x22mm (x6); 35mm: M5x25mm (x4); M6x22mm (x2)

FUNKY stem

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; Silver polished; White painted

bar bore: 31.8mm extension: 50mm; 65mm weight: 127g (50mm); 146g (65mm)

colors: Petrol chrome plated; Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.; Orange anod. bar bore: 25.4mm; 31.8mm; 35mm

25.4mm; 31.8mm

Our hi-end stem is made of cold forged and CNC machined 6061 aluminium. Funky is one of the lightest gravity stems on the market with cool and unique look thanks to the smooth lines of its body shape and 2-pcs front plate design.

25.4mm;  31.8mm;  35mm

52

PARTS & ACCESORIES

PARTS & ACCESORIES

RAGE v.2 stem

weight: 154g (25.4mm); 175g (31.8mm); 168g (35mm)

25.4mm

colors: Petrol chrome plated; Black anod.; Red anod. bar bore: 25.4mm extension: 30mm bolts: M6x22mm (x2); M6x42mm (x2) weight: 145g

53


35mm

25.4mm 800mm

750mm

Our 800mm wide handlebar in a super strong 35mm standard which is perfect for the Freeride and Downhill riders. Lightning is made of butted 7050 aluminium. Despite the big size and outstanding strength this handlebar twith its 299g definitely belongs to the featherweight division.

SWING LOW handlebar

colors: Red Devil; Miami Vice; Black anod.; Turquoise anod.; Red anod. diameter: 35mm width: 800mm rise: 1” upsweep: 5.5° backsweep: 8° weight: 299g

Swings are our very popular lightweight bars made of butted 7075 aluminium. 750 mm wide with a 2” rise makes them a perfect choice for any type of gravity riders who prefer 25.4 mm standard. The wide angle bendings ensures the proper freestyle look. colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Red anod. diameter: 25.4mm width: 750mm rise: 2”

31.8mm

31.8mm

780mm

31.8mm

NITRO FR handlebar

colors: Black anod.; Turquoise anod.; Red anod.; Orange anod.; White painted

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Red anod.; Orange anod.; White painted

diameter: 31.8mm width: 780mm rise: 0.5”

upsweep: 5° backsweep: 9° weight: 320g

Second version of our hi-end 31.8 mm Nitro bars with increased rise to meet requirements of many Freeride and Downhill riders. Nitro FR is made of the hi-end butted 7075 aluminium series.

diameter: 31.8mm width: 780mm rise: 1.5”

upsweep: 6° backsweep: 7° weight: 385g

SWING HI handlebar

High rise version of our lightweight Swing bars made of butted 7075 aluminium. They come in 2016 in 750mm width with a 3.5” rise and truly smooth bendings. Go for them if you need high rise bars and aluminium is your preferable material choice. colors: diameter: width: rise:

Black anod.; Red anod. 25.4mm 750mm 3.5”

22.2mm

750mm

upsweep: 6° backsweep: 7° weight: 395g

720mm

780mm

NITRO DH handlebar

Lightweight and super strong Downhill handlebar made of butted 7075 aluminium. Super wide and comfortable with perfect shape for those who search for the out of bounds experience. Designed for the 31.8 mm stems only Nitro bars should fit needs of all hard hitters.

54

25.4mm

750mm

PARTS & ACCESORIES

PARTS & ACCESORIES

LIGHTNING handlebar

upsweep: 4° backsweep: 9° weight: 345g

* Dartmoor handlebars are strictly tested to meet not only the EN standards but also our custom requirements with increased load, so go for them if you want to define gravity one more time!

TORNADO handlebar

If you look for the affordable and reliable bars and you are not a weight weenie then Tornado is for you. It is made of the 6061 aluminium with simpler butting to keep the weight in line with the price. This bar was designed with input from our riding experience, so it keeps the best shape and angles to provide you a safe ride. From the streets of big cities to the deep woods and mountain ranges, Tornado will take you anywhere. colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod. diameter: 31.8mm

width: rise: upsweep: backsweep: weight:

750mm 1.5” 4° 9° 430g

TOXIC handlebar

Strong bars made of butted and fully heat treated Cr-Mo 4130 steel to survive any street riding abuse you will put on them. High rise and proper geometry will make riding at your favourite street spots much more comfortable now.

colors: Petrol chrome plated; Red Devil; width: Brushing chrome plated; rise: Black painted; White painted upsweep: diameter: 22.2mm backsweep:

720mm 3.5” 5° 8° weight: 455g 55


The new Roots grips are our answer to the needs of the gravity riders. Michał Śliwa, two times Polish National Downhill Champion, got us hooked on this idea of developing the grips that will be thicker and softer than other grips on the market. The hard part of this project was to design a product that will not catch mud easily and still be sticky in the extreme conditions. After lots of testing and feedback the Roots grips were born. They come into their own in wet DH and Freeride tracks but our testers found them good enough even for Enduro or Dirt Jumping. The surface design can be described as the mountains slowly turning into the tree roots. Those soft elements not only look good but are ergonomically linked with the structure of the hand. The center of the hand got a solid grab on the mountains looking pattern while fingers slip between the roots pattern to catch even firmer grip! These lock-on beauties comes with a special aluminium bar end design where the side cap is replaceable. You will get them with the aluminium side cap assembled but don’t worry weight weenies, we will include a set of spare plastic caps for you too!

PARTS & ACCESORIES

PARTS & ACCESORIES

ROOTS lock-on grips

MAZE single side lock-on grips colors: Black; Green; Red; Turquoise; Purple; Graphite lenght: 130mm diameter: 32mm weight: 123g (w/aluminium side caps); 117g (w/plastic side caps)

Maze are the single side lock-on grips which offer the locking feature but without a plastic core under the whole length of the grips. The hard plastic sleeve is only on a short distance below the single lock-on ring. This way you keep all the advantages of the lock-on grips, which are: staying in place safely, ability to remove them quickly and easily and preventing the mud to get under the rubber. Same time you earn much lighter weight and thick rubber for better comfort without increase of the outer diameter. The pattern of the rubber is made of the thin and soft lines creating a kind of the labirynth shape. Perfect for the Enduro and All Mountain but great also for Dirt Jumping or even Downhill in dry conditions. Design invented fully by the Dartmoor-Bikes with technological support from Velo, the biggest grips maker in the world, as collabo project.

colors: Miami Vice; Black; Green; Red; Turquoise; Purple; Graphite lenght: 137mm diameter: 31.5mm weight: 107g (w/aluminium side caps); 101g (w/plastic side caps)

BLOCK flangeless bmx grips

ICON lock-on grips

Lightweight and comfortable MTB grips with lock-on alu clamps and Ride Your Way alu bar ends. 145 mm length gives you plenty of room for barspins and other tricks. Custom design with Dartmoor logo in the grip pattern. Special compound material – comfortable and with increased durability. Alu bar ends for better handlebar protection. colors: Black; Green; Red; Turquoise; Orange; Graphite; Brown lenght: 145mm diameter: 32mm weight: 138g (with clamps/bar ends) 56

SHAMANN bmx grips

High flanges grips made of special rubber compound with increased durability and extra softness for very comfortable using. Plastic bar ends included.

Soft flangeless grips made of durable compound comfortable for both, gloves users and people who prefer to ride with bare hands. Low profile, multiple direction Tetris blocks style pattern offers a perfect grip for better control and corresponds to the “Every block is different but game is the same” slogan molded on the grip ends. As you know every player needs a proper joystick to enjoy the game, so we included a very special nylon bar ends. They are made of two sections to fit both – Cr–Mo and alu bars and their pad controller looking design tease you to start the game now!

colors: Miami Vice; Black; Green; Red; Turquoise; Purple; Transparent lenght: 155mm diameter: 29mm weight: 96g (with bar ends)

colors: Black, Green; Red; Turquoise; Purple; Orange; Graphite; Brown lenght: 150mm diameter: 30mm weight: 154g (with bar ends) 57


PARTS & ACCESORIES

PARTS & ACCESORIES NEW!

TRAIL RACING seat

Our super comfortable and proved Trail saddle found a lot of fans in the previous two years. Now we offer this second version with a racing look and waterproof cover for quick and easy cleaning. So go for this saddle if you prefer a racing style above the roam one. Another important addition in the Trail Racing saddle is the new front bumper according to our custom design. Its special shape helps to prevent the rails and bottom part of material when transporting your bike on the lifts.

colors: Black-Black; Black-Red; Black-Turquoise; Black-Miami Vice seat size: 260x129mm weight: 253g

NEW!

PRIMAL seat

Primal is our new seat dedicated for Enduro and Trail riders. Thanks to the special cover printing design emphasizing all what we really like in the mountain biking syle of life it combines a cool freeride look with a racing shape for all of you ‘free your mind’ lovers. This seat is pretty lightweight and with strong base construction plus hollow Cr–Mo rails Primal should be a primary choice for many of you in the upcoming season.

NEW!

VERN

TRAIL seat

Trail is our affordable seat with some high end features like a strong base construction, hollow Cr–Mo rails and the abrasion proof Cordura cover. This saddle will save your ass from the bumpy trails and hard hits plus last longer even in the bad weather conditions, which are so common for enduro and all mountain riding. Wide extra padded nose helps when climbing, especially when you shift yourself forward over the bars. colors: Black; Red; Blue seat size: 260x129mm weight: 249g 58

ROOTS seat

Roots saddle is designed for the Freeride and Downhill riders so it must be tough enough to take some overdoses of fun. Easy to catch with your knees or hands – getting stylish on the loose track is now an obligatory! Rails are made of the hollow Cr-Mo steel while the cover made out of the Cordura material in black/black, black/red or black/blue colors pattern will suit well your next fun machine and its eye-catching stitching design will make your bike far more unique.

Comfortable and lightweight knee pads with anatomically fitted design offering very good protection in very affordable price! No need to take off your shoes to wear it. With durable fabrics used in crucial areas and with hard shells to protect your knees.

colors: Black, Red Devil; Miami Vice seat size: 276x138mm weight: 185g

NEW!

SHAFT

Comfortable shin pads with anatomically fitted design. Mounted with 4 straps without taking your shoes off. Flexible inner pad combined with EVA foam for maximum comfort. Made of highly breathable special version of strong neoprene material. With a super strong and durable fabric on the front, covering the inner pad.

colors: Black; Black-Red; Black-Blue seat size: 281x131mm weight: 299g 59


PARTS & ACCESORIES

DARTMOOR hoodie

Regular hoodie with raglan sleeves. Specially extended back for more comfort while riding in cold days. Your butt will never be exposed to cold! 100% cotton.

colors: Grey Melange sizes: M–XXL

NEW!

FATTY PIVOTAL seat

Well known Dartmoor’s extra thick foam padded Pivotal seat comes now in all black leather-style finish or red devil full printing option. Cover of the Fatty seat is made now of 3 pieces for better fit and the double stitching with Ride Your Way logo give it a truly stylish look.

colors: Black; Red Devil seat size: 234x142mm weight: 329g

NEW!

KAMLOOPS tee

T-shirt with Szymon Godziek’s photo from Kamloops, Canada.

color: Red sizes: M–XXL

NEW! NEW!

FATTY COMBO seat

New version of our extra thick foam padded combo saddle comes now in all black leather-style finish or red devil full printing option. Cover is made now of 4 pieces of material for better fit and the double stitching with Ride Your Way logo makes the classic look.

60

colors: seat size: seat post size: weight:

Black; Red Devil 230x143mm 27.2x200mm 356g

NEW!

LITE COMBO seat

New version of our slim combo saddle comes now in all black leatherstyle finish or red devil full printing option. Cover of the Lite Combo seat is made now of 4 pieces for better fit and the double stitching with Ride Your Way logo makes the classic look.

colors: seat size: seat post size: weight:

Black; Red Devil 222x125mm 27.2x200mm 265g

RIDE YOUR WAY tee Regular t-shirt with Ride Your Way graphic. 100% cotton.

color: Green sizes: M–XXL

NEW!

DARTMOOR tech tee Technical t-shirt with Dartmoor logo. 100% poliester with cotton feeling..

PARTS & ACCESORIES

NEW!

colors: Black/Miami Vice; Turquoise/Green sizes: M–XXL

NEW!

CANYON GAP tee T-shirt with Ride Your Way graphic combined with Szymon Godziek’s photo backflipping Rampage canyon gap.

color: Jeans Blue sizes: M–XXL

NEW!

STRONG ROOTS tee/tanktop

Regular t-shirt or technical tanktop with Strong Roots graphic.

colors: Black/Miami Vice sizes: M–XXL 61


dart moor-bikes.com

facebook .dar tmoo r-bikes.com

instagram. dart moor-bikes.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.