Five Art Components To Control When DTG Printing Direct to Garment Printing is good for lots of factors. However, the large one is the truth that established is quite speedy and smallest. There’s no need for partings, burning screens, mixing ink or creating a press. While it's not as simple as hitting Control+P, it is so much toward on the prepared satisfaction. If the artwork is just right for screen printing, it is usually good for Direct-to-Garment as good. Although, there are some art/design parts so that it will detect the weaknesses of digital printing.
FLATTENED RASTER photographs Knocking down a raster picture creates white pixels where there might not be something earlier. In some cases, this ought to be rejected earlier than printing, often leaving sharp points, distorted or faded in the procedure. It's difficult to remove and may affect the photo, so exit the file in layers simply in case.
Both front and back Prints On dark colors About DTG on a dark colored shirt, crisis starts with large print areas on the front and back. A pretreat need to be used to dark colored shirts after which heated in press. Due to this method, relating to printing on the again, there will likely be a seen ring where the collar is on the opposite side considering that of the pretreat focused there.
Higher Areas of Hard White White practically seems high-quality on DTG Printing so long as you’re no longer going to an unusually large solid white area. In most situations, white goes to seem right, however, in those large areas, the clarity of the ink does to be clearer. On repay, a white ink has got to be applied, so much so in these situations, that the ink is sometimes pooling up into rubbery lumps. Not cool. So, ignore that excellent snapshot of a polar bear drinking milk at a P.Diddy type all white rooftop party.
BLUES Blues are tricky. The technology just hasn’t stopped the blue problem especially yet. Especially when printed on dark colors, large areas of darker blue are likely to look grainy and faded. This mean purple or green with a lot of blue in them are affected as good. Blues on the lighter surface tend to fair higher. So, printing Cookie Monster eating out of an Oreo bundle and fishing on the lake is going to look terrible. Back to the design board.
Transparencies on Dark Colors In my honest opinion, this is the Achilles’ heel of DTG. If there are clearness in your picture that may be meant to use the shirt color and it is happening a dark shirt, there’s an immediate problem. There is a white under base used to all images happening darker clothes. It goes on below all areas, together with that which, with the artwork, are simple or light. For that reason, the printed photo shows the under base under the clearness moment to the shirt color. For example, a white to black fade on a black shirt ends up going from white to gray or white to white. There are some quick solutions to this crisis, but they're case-sensitive and usually are not confirmed to work.
Should you ever have any doubt, send your art over to your DTG printer for their opinion on how to improve the graphic for optimal printing. Source Link: http://garmentprintingaustralia.wikidot.com/