ADA
Fact Sheet
Section 606.3mm 40" max 1015mm
• In addition, a minimum 9 inches (230 mm) high toe clearance must be provided extending back toward the wall to a distance no more than 6 inches (150 mm) from the back wall.
Section 606.3mm
• This knee clearance must be 29 inches (735 mm) high at the front of the lavatory and no less than 27 inches (685 mm) high at a point 8 inches (205 mm) back.
34" max 865mm
• The minimum knee clearance must be free of equipment or obstructions for a minimum of 8 inches (205 mm) extending from the front edge of the lavatory back toward the wall.
• The toe clearance space must be free of equipment or obstructions.
29" min 735mm
9" min 230mm
• The bottom edge of a wall-mounted mirror must be mounted no more than 40 inches (1015 mm) above the floor.
27" min 685mm
• The maximum height of the lavatory is 34 inches (865 mm).
NOTE: E quipment permitted in shaded area
CLICK HERE to check out DECOLAV’s entire ADA collection to ensure ADA Compliance
Knee clearance
8" min 205mm
The Americans with Disabilities Act (ADA) requires the Department of Justice (the Department) to publish ADA design standards that are consistent with the guidelines published by the U.S. Architectural and Transportation Barriers Compliance Board (Access Board). The Department has adopted revised ADA design standards that include the relevant chapters of the Access Board´s 2004 ADA/ABA Accessibility Guidelines as modified by specific provisions of the Department´s revised rules implementing title II and title III of the ADA. To minimize compliance burdens on entities subject to more than one legal standard, these design standards have been harmonized with the Federal standards implementing the Architectural Barriers Act
For our complete ADA collection visit us at
www.decolav.com
6" max 150mm
Toe clearance
17" min 430mm
Depth
and with the private sector model codes that are adopted by most States. The changes to the design guidelines were adopted by the Access Board as a series of separate rules that were combined in the 2004 ADA/ABA guidelines. These rules addressed recreation facilities, play areas, State and local government facilities (detention facilities and courthouses), and, finally, the revision of the Access Board´s 1991 guidelines. These changes have been adopted, with some modifications, as the 2010 Standards for Accessible Design.* *”Fact Sheet.” – Adoption of the 2010 Standards for Accessible Design. N.P., 03 Aug. 2010. Web. 10 Oct. 2016.
DECOLAV® 606 Banyan Trail Boca Raton, FL 33431 561.274.2110
ADA
Compliant 1409-CWH Available in White
1819W-1P/1B/8P/8B-CWH Single-hole and 8” faucet drilling
21” W x 15” D x 8” H
18 1⁄4” D x 23 1⁄2” W x 6 1⁄8” H
1412-CWH
1419-1/8-CWH
1436-1/4/8-CWH
19 1⁄4” W x 15 1⁄2” D x 7 1⁄2” H Fits standard 17"x 14" cutout.
23 1⁄2” W x 18 1⁄4” D x 6 1⁄8” H U.S. Patent # D603,486
17 3⁄10” D x 20 3⁄10” W x 7 9⁄10” H
1833-SSA
1834-SSA
1835-SSA
18 13⁄16” D x 25 3⁄8” W x 4” H
18” D x 25” W x 4” H
18” D x 30” W x 5” H
Available in White
Predrilled pilot holes for 4” and 8” faucets
Single-hole and 8” faucet drilling
Predrilled pilot holes for 4” and 8” faucets
For our complete ADA collection visit us at
www.decolav.com
Single-hole, 4” and 8” faucet drilling
Predrilled pilot holes for 4” and 8” faucets
DECOLAV® 606 Banyan Trail Boca Raton, FL 33431 561.274.2110