1.1 DSP-10000
03
1.2 DSP-20000
04
1.3 DQX-7200 / DQX-14400
05
1.4 DA-2500 II / DA-4000 II
06
1.5 MH-7200 / MH-9400
07
AUDIOLAB
AUDIOLAB
Based in Miami, United States, American Pro International Corporation is a mayor developer and designer of professional sound and lighting equipment. Founded in 2002, AMPRO Int. Corp. is a diversified global enterprise that includes six mayors brands: NEO, AUDIOLAB, TECSHOW ALLTRUSS, XPRESSION & PIXELVISION. Our main objetive is to supply the best tool to every entertainment professional.
Power Amplifiers
DQX, DSP, MH & DA SERIES / 1. POWER AMPLIFIERS
INTRODUCING AUDIOLAB / AMERICAN PRO
1.
01
02
DA-2500 II,DSP-20000 DA-4000 II/ / 1.2 1. POWER AMPLIFIERS
DSP-20000 / Simple - Powerful - Lighter
The DSP Series is the professional’s choice in digital amplifiers. Ideal for large venues and profesional use, the DSP Series obtains the highest standards. DSP Processing included, there’s nothing you can’t do with them. Lowest weight and highest efficiency. Power supply: Advanced SMPS circuit and APFC design to provide a real globally applicable power supply with extremely high efficiency. Based on these two technologies, the power supply of the amplifier has major advantages: low harmonic wave, high efficiency, high power factors, etc. Circuit protection: Short-circuit, over-voltage, under-voltage, temperature control, DC protection, peak clipping and amplitude limiting and VHF protection, as well as the automatic temperature control fan system. New circuit topology: The more complete digital signals are obtained after music signals adopt the new modulation mode. This new modulation mode ensures sampling of some extremely small signals and enriches sampling modes. In addition, the fixed switch frequency is greatly reduced, which allows a power amplifier to produce less heat and greatly enhances its efficiency. At the same time, the static power consumption is also reduced by a wide margin. DSP Processor: NEW DSP processor with network function: No-limites remote control.
SPECIFICATIONS
AUDIOLAB 03
DSP-10000
SPECIFICATIONS
DSP-10000
SPECIFICATIONS
DSP-20000
SPECIFICATIONS
DSP-20000
Rated output power (8Ω)
2x1500W
IMD-SMPTE (0.1W full power)
1%
Rated output power (8Ω)
2x2800W
IMD-SMPTE (0.1W full power)
1%
Rated output power (4Ω)
2x2700W
DIM30 (0.1W full power)
1%
Rated output power (4Ω)
2x5300W
DIM30 (0.1W full power)
1%
Rated output power (2Ω)
2X4800W
Crosstalk (ref. 1kHz at 10% rated output power)
-70 dB
Rated output power (2Ω)
2X9500W
Crosstalk (ref. 1kHz at 10% rated output power)
Maximum bridged output power (16Ω)
3000W
Frequency response (ref. 1kHz)
Maximum bridged output power (8Ω)
5400W
Maximum bridged output power (4Ω)
9500W
-70 dB
20 Hz a 20KHz +/- 2d
Maximum bridged output power (16Ω)
5600W
Frequency response (ref. 1kHz)
Input impedance
20kΩ
Maximum bridged output power (8Ω)
10600W
Input impedance
20kΩ
Damping Factor (at 100Hz/1kHz 8Ω)
>200
Maximum bridged output power (4Ω)
19000W
Damping Factor (at 100Hz/1kHz 8Ω)
>200
Maximum RMS voltage swing (THD=1%, 1kHz)
14
Signal-to-Noise ratio ( At weighted 20Hz-20kHz)
Maximum RMS voltage swing (THD=1%, 1kHz)
109V
Signal-to-Noise ratio ( At weighted 20Hz-20kHz)
>105dB
Slew rate (at 1kHz)
50V/us
Power requirements
Input sensitivity (at rated output power or voltaje, 1kHz)
1Vrms
Net Weight
9 kg. / 20 lbs.
THD (0.1W full power)
0.05%
Dimensions
483x370x44 mm. / 19 x14.5 x 1.7 in.
AC~100-240V (50-60Hz)
9V
20 Hz a 20KHz +/- 2d
>105dB
Slew rate (at 1kHz)
50V/us
Power requirements
AC~100-240V (50-60Hz)
Input sensitivity (at rated output power or voltaje, 1kHz)
1Vrms
Net Weight
9 kg. / 20 lbs.
THD (0.1W full power)
0.05%
Dimensions
483x370x44 mm. / 19 x14.5 x 1.7 in.
AUDIOLAB
1.1 POWER AMPLIFIERS / DSP-10000
DSP-10000 / Simple - Powerful - Lighter
04
DQX-14400
Efficient - Versatile - Professional
A trustable amplifier is always a must.The DA Series, with its efficient switching power supply, succeeds in giving unprecedent power density with Sonic transparency.
DA-2500 II
DA-4000 II
Features: The DQX Series has the high reliability and applicability of classic power amplifiers, with a re-designed digital modulation circuit, which gives the input a larger dynamic range. High efficiency & small distortion.
Features
Features
Power supply: Advanced SMPS circuit and APFC design to provide a globally applicable power supply with extremely high efficiency. Based on these two technologies, the power supply of the amplifier has major advantages: low harmonic wave, high efficiency, high power factors. Power amplification: New circuit topology: Obtain a better sound output after applying new sound settings. In addition, the fixed switch frequency is greatly reduced, which allows a power amplifier to produce less heat and greatly enhances its efficiency. At the same time, the static power consumption is also reduced by a wide margin. Circuit protection: Short-circuit, over-voltage,
- Professional Class DA output stages for high efficiency and sonic transparency. - Unprecedented power density: The DA-2500 II delivers a total of 14000 W (2 x 7000 W @ 2 ohms) in only 2 rack spaces. - Proven durability in extreme touring conditions. - Comprehensive protection and warning — Output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start. - All channels bridgeable with automatic -6dB summing compensation. - Outputs optimized for load conditions with VPL. - Efficient and uniform Intercooler cooling.
- Professional Class DA output stages for high efficiency and sonic transparency. - Unprecedented power density: The DA-4000 II delivers a total of 8800 W (4 ohms) in only 2 rack spaces. - Four channels — All channels bridgeable for 2- or 3-channel configurations. - Lo-Z or Hi-Z (70 V / 100 V) — Selectable per channel, normal or bridged. - Voltage Peak Limiter (VPL) — Configurable per channel to optimize each output for connected loads. - Professional Class DA output stages for high efficiency and sonic transparency. - Comprehensive protection and warning — Output current, DC, high temperature, very high frequency (VHF), short circuit, open load, main fuse protection, and soft start. - Efficient and uniform Intercooler cooling.
DQX-7200
under-voltage, temperature control, DC protection, peak clipping and amplitude limiting and VHF protection, as well as the automatic temperature control fan system.
DQX-7200
DQX-14400
Rated output power (8Ω)
4x650W
4x1200W
Rated output power (4Ω)
4x1100W
Rated output power (2Ω)
AUDIOLAB
DQX-7200
DQX-14400
IMD-SMPTE (0.1W full power)
1%
1%
4x2100W
DIM30 (0.1W full power)
1%
1%
4X1800W
4x3600W
Crosstalk (ref. 1kHz at 10% rated output power)
-70 dB
-70 dB
Maximum bridged output power (16Ω)
1300W
2400W
Frequency response (ref. 1kHz)
20 Hz a 20KHz +/- 2d
20 Hz a 20KHz +/- 2d
Maximum bridged output power (8Ω)
2200W
4200W
Input impedance
20kΩ
Maximum bridged output power (4Ω)
3600W
7200W
Damping Factor (at 100Hz/1kHz 8Ω)
66V
97V
Slew rate (at 1kHz)
50V/us
50V/us
Power requirements
Input sensitivity (at rated output power or voltaje, 1kHz)
1Vrms
1Vrms
Net Weight
9 kg. / 20 lbs.
THD (0.1W full power)
0.05%
0.05%
Dimensions
483x364x44 mm. / 19 x14.3 x 1.7 in.
Maximum RMS voltage swing (THD=1%, 1kHz)
SPECIFICATIONS
Signal-to-Noise ratio ( At weighted 20Hz-20kHz)
DA-2500 II
DA-4000 II
Rated output power (8Ω)
2X2350W
4x1250W
Signal Noise Ratio (dB)
20kΩ
Rated output power (4Ω)
2X4400W
4x2100W
Channel separation (Crosstalk) at kHz
>200
>200
Rated output power (2Ω)
2X7000W
4x2200W
>105dB
>105dB
Maximum bridged output power (16Ω)
4700W
Maximum bridged output power (8Ω)
9 kg. / 20 lbs. 483x364x44 mm. / 19 x14.3 x 1.7 in.
AC~100-240V (50-60Hz) AC~100-240V (50-60Hz)
SPECIFICATIONS
SPECIFICATIONS
DA-2500 II
DA-4000 II
>112dBA
>112dBA
>70 dB
>70 dB
Input Impedance
20kΩ
20kΩ
2500W
Input Common Mode Rejection, CMR
54 dB
54 dB
8800W
4200W
Output Connectors:
Speakon connectors
Speakon connectors
Maximum bridged output power (4Ω)
14000W
4600W
Weight
12 kg. / 26.4 lbs.
12 kg. / 26.4 lbs.
THD (1 kHz and 1 db below clipping)
0,05%
0,05%
Dimension
483 x 377 x 88 mm. / 19x13.5x3.5 in.
483 x 377 x 88 mm. / 19x13.5x3.5 in.
DA-2500 II & DA-4000 II / 1.4 POWER AMPLIFIERS
Lighter, smaller and louder, the DQX Series brings modern solutions to touring, making it easy and simple. A unprecedented weight-power relation.
SPECIFICATIONS
05
DA Series /
AUDIOLAB
1.3 POWER AMPLIFIERS / DQX-7200 & DQX-14400
DQX Series / Lighter - Louder - Safer
06
2.
Features: MH series power amplifier use particular MIRRORED FRONTED POWER SUPPLY BRIDGE to make the symmetrical circuit design. Less Distortion + Better Sound. Input power supply filter: Stronger anti-jamming capability. Amplifier circuit with shield cover: Less noise, clearer sound. Independence close cooling wind path to make the cooling faster. Protection: Power on amortize, delay connect speaker, limited function, over-current protect, overheat protect, short-cut protect and output DC protect. 3800W or 6000W rated output at 2Ω.
SPECIFICATIONS
AUDIOLAB
MH-7200
MH-9400
Rated output power (8Ω)
2x800W
2x1400W
Slew Rate
Rated output power (4Ω)
2x1300W
2x2100W
Rated output power (2Ω)
2X1900W
2X3000W
Maximum bridged output power (8Ω)
2600W
4200W
Maximum bridged output power (4Ω)
3800W
6000W
OutPut Circuit Type
Class H
Class H
Input Impedance
20kΩ
20kΩ
20Hz~20KHz
20Hz~20KHz
0.05%
0.05%
80V/usec
80V/usec
Frequency Response THD
07
MH-9400
MH-7200
SPECIFICATIONS
MH-7200
MH-9400
80V/usec
80V/usec
Hum and Noise
103dB
103dB
Damping Factor
>500
>500
High/Low Automatism Corlrol
High/Low Automatism Corlrol
Suteguard
DC Safeguard/out Overloading/Chancroid Sgartup/Boot-Strap Short
DC Safeguard/out Overloading/Chancroid Sgartup/Boot-Strap Short
Net Weight
27 kg. / 59.5 lbs.
35.5 kg. / 78 lbs.
Gross Weight
30 kg. / 66 lbs.
38.5 kg. / 85 lbs.
482×443.5×88.8 mm. / 19x17.4x3.5 in.
482×468×132 mm. / 19x18.4x5.2 in.
Radiator
Dimensions
Line Arrays 2.1 ALA-24/28A
09
2.2 ALA-210
10
2.3 ALA-212
11
2.4 ALA-118 / ALA-218
12
ALA SERIES / 2. LINE ARRAYS
The MH Series is AUDIOLAB’s professional answer for those who need outstanding output levels and a continuos 2-ohms use. Is ideal for clubs and touring applications that demand the finest audio quality.
AUDIOLAB
1.5 POWER AMPLIFIERS / MH-7200 & MH-9400
MH Series / Strong - Powerful - Reliable
08
ALA-210 /
Bright - Portable - Modern
The ALA 24-28 is the ideal powered line array system for small/medium venues. With a compact design and a DSP processor, versatility and sound quality are guaranteed. Features:
High Fidelity - High Power - High Performance
The ALA -210 is a line array loudspeaker for medium scale sound reinforcement. Born to satisfy the most demanding audio professionals, ALA-210 is the result of years of development and research.
- 4 x ALA24 mid/high boxes consisting of 1 x Ribbon and 2 x 4” drivers per cabinet and 1 x ALA28 Subwoofer cabinet comprising of 2 x 8” drivers. - Built-in power amplifier module and DSP speaker processing within the ALA-28. - The DSP includes PEQ, Crossover and Slope, Delay, Gain and Limiter and is programable via either RS232 or USB by PC. - RS485 allows multiple systems to be connected together for control. - Software included. - XLR Input and output connectors. - Integrated rigging and speaker cabling included. - Rigging allows adjustment of ALA24 in 1° increments. - Durable Polyurethane textured base paint. - Up to 4 systems can be arrayed - Ribbon tweeters used in this system can give a wide frequency response up to 40KHz, which guarantees high fidelity and nice sound coverage. Frequency response-HF
Features:
FB-210 AVAILABLE
24’’
19.4’’
COMPONENTS
ALA-210
- The ALA-210 is a line array loudspeaker system for medium scale sound reinforcement. The cylindrical wave segments of each cabinet will couple without gaps and sum up coherently. - All components are arranged symmetrically around the centre axis of the cabinet to produce a perfect symmetrical dispersion pattern. - The ALA-210 cabinet is made of plywood and has an impact and weather resistant polyurethane finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. At the side panels to handles are let in. - All necessary rigging components are mounted at the cabinet and open up or slide out when needed. Up to 4 ALA-210 cabinets can be stacked and interlinked using the standard ALA rigging components and the flying frame as ground support. - The ALA-210 loudspeakers are mechanically connected by using its three point suspension system. - It consists of the flying frame which suspends the cabinets using rigging links and pins located on both sides of the front of the cabinets, and a central rear splay link. - This Series rear splay link allows quick and easy selection of vertical angles between the cabinets. These are all permanently attached to the cabinets.
ALA-210 / 2.2 LINE ARRAYS
2.1 LINE ARRAYS / ALA-24/28A
ALA-24/28A /
35.5’’
LF 2 x 10” neodymium drive Frequency response-HF
HF 2 x 4”x 1” 101.6 x 25,4 mm neodymium
Frequency response-LF
Kapton planar wave drivers max SPL 133 dB
AUDIOLAB 09
Frequency Response
ALA-24/28A
(-3dB) 50Hz-40KHz (-10dB) 45Hz-40KHz
Power Rating
L:300W H:300W
Standard SPL
115dB
Max SPL
121dB
Crossover point
L/M: 125Hz, M/H :3.2KHz
Input Impedance
10k ohm
SPECIFICATIONS
Dispersion Connecting Mode Power supply Product Dimensions Packaging Dimensions
ALA-24/28A
120 degree x (30°-90°) switchable NL4 AC 230V/50Hz 492×608×900 mm. / 19.4 x 24 x 35.5 in. 697×696×580 mm. / 27.5 x 27.5 x 22.8 in.
Net Weight
45 Kg. / 99 lbs.
Gross Weight
50 Kg. / 110 lbs.
Frequency Response Sensitivity Max Sound Pressuer Dispersion
ALA-210
55 Hz-18 kHz 104dB 1W/1M PER UNIT, 134dB PER 12 UNITS
AUDIOLAB
SPECIFICATIONS
SPECIFICATIONS
Side View
139dB 108 x 10 degree
Nominal impedance LF
8/16 ohms
Nominal impedance HF
8/16 ohms
Power handling capacity LF
400W/1900W peak 10 ms
Power handling capacity HF
160W/Peak 450W
11.8’’
Front View
19.8’’
Side View
31.5’’ Front View
Top View
Back View
10
Frequency response-HF
Frequency response-LF 120
13 0
CL IO
CL IO
180. 0
dB S
De g
12 0
108. 0
110
36.0
10 0
-36. 0
90
-108.0
80
20 2
50
100
20 05
00
1k 2
k
Hz
5k 1
De g
110
108. 0
100
36.0
0k
20 k
- 180. 0
90
-36. 0
80
-108.0
70
- 180. 0
2 20
50
10 0
20 0
50 0
1k
2k
AUDIOLAB 11
10 k
14.7’’ Side View
ALA-212
RMS power
LF:5002W, HF:100W
Dispersion
LF:110°x 90°, HF:90° x 20 LF: 90Hz 4 kHz (-3dB) HF: 900Hz15 kHz) (-3dB)
Sensitivity LF
102dB ( 1m/1W), HF:110dB (1m/1W)
Max SPL LF
131dB, HF:134dB
Security
Overheat protection for driver
Dispersion
LF:110 °×90 ° HF:90 °×20 °
20 k
FREQUENC Y RESPON SE
Front View
SPECIFICATIONS
Power Rated impedance DC impedance
Top View
Top View
LF:6Ω HF:6.4Ω
Connector
NL4×2 @ LF:1+ 1- HF2+2-
Net Weight
37 Kg. / 81.4 lbs.
Dimensions
960×372×623 mm. / 37.8×14.7× 24.5 in.
Top View
- 1 x 18” professional subwoofer - High intensity enhanced cabinet construction - Flexible proprietary flying system - Can be used assigned with full range high SPL output speakers - Suitable for enhanced LF system
- Computer aided design to optimise frequency and phase response - Two transducers high sensitivity speaker. - Two 18” high efficiency subwoofers. - Driven by one amplifier. - Suitable for the entertainment sound reinforcement, including performance bar, night club, touring perfo mance. - Used for high quality output replaying music working with full range speaker.
ALA-212
LF:8Ω HF:8Ω
Front View
Features
Back View
LF: 500W HF: 100W (RMS) LF: 1000W HF: 200W (MUSIC) LF: 2000W HF: 400W (PEAK)
31’’
Features
37.8’’
24.5’’
Double 12” Neo woofer
Frequency response
5k
ALA-212
Double 3” Neo compression driver
SPECIFICATIONS
Hz
PHAS E CURV E
FREQUENCY RESPONSE
22’’
180. 0
dB S
Front View
PHAS E CURV E
COMPONENTS
25’’
25’’
- The ALA-212 is a line array loudspeaker system for large scale sound reinforcement. The cylindrical wave segments of each cabinet will couple without gaps and sum up coherently. - All components are arranged symmetrically around the center axis of the cabinet to produce a perfect sy metrical dispersion pattern. - The ALA-212 cabinet is made of plywood and has an impact and weather resistant polyurethane finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. At the side panels to handles are let in. - All necessary rigging components are mounted at the cabinet and open up or slide out when needed. Up to 4 ALA-212 cabinets can be stacked and interlinked using the standard ALA rigging components and the flying frame as ground support. - The ALA-212 loudspeakers are mechanically connected by using its three point suspension system. - It consists of the flying frame which suspends the cabinets using rigging links and pins located on both sides of the front of the cabinets, and a central rear splay link. - This Series’ rear splay link allows quick and easy selection of vertical angles between the cabinets. These are all permanently attached to the cabinets.
FB-212 AVAILABLE
The ALA-218 is a profesional wooden 2 x 18”subwoofer manufactured by AUDIOLAB. Ideal for large venues and Line array reinforcement.
42’’
Features:
ALA-118 is a professional wooden 18” subwoofer manufactured by AUDIOLAB. It is made of MDF toasting Paint.
SPECIFICATIONS
ALA-118
ALA-218
LF:18”×1
LF:18”×2
48Hz - 1000HZ / 40Hz - 1200 HZ
35Hz - 1800 Hz / -
Sensitivity(1W/1m)
96dB
102dB
Rated Power (RMS)
500W
1600W
SPL (1m)
123dB
134dB
Max.SPL(1m)
129dB
140dB
THD (1 kHz and 1 db below clipping)
0,05%
0,05%
Transducers Frecuency Response (-3dB/-10dB)
SPECIFICATIONS
ALA-118
ALA-218
Rated Impedance
8Ω
4Ω
Input Connectors
LN4×2
NL4×2
52 Kg. / 114,5 lbs.
85 kg. / 187 lbs.
640x640x640 mm. / 25 x 25 x 25 in.
567×786×1075 mm. / 22x31x42 in.
Net Weight Dimensions
ALA-118, ALA-218 / 2.4 LINE ARRAYS
The ALA -212 is a line array loudspeaker for large scale sound reinforcement. Born to satisfy the most demanding audio professionals, ALA-212 is the result of years of development and research.
AUDIOLAB
ALA-118 / ALA-218 / Powerful - Punchy - Strong
High Fidelity - High Power - High Performance
25’’
2.3 LINE ARRAYS / ALA-212
ALA-212 /
12
15
3.3 RS-18A / RS-215
16
3.4 MF-12A / MF-15A
17
Features
Features
- 2 way active full range speaker - One 12”woofer - One 1.7” compression driver - Class D power amplifier Front View - Rugged ABS enclosures - Heavy duty protective grill - Integrated Monitor feet allow the easy stage monitor application SPECIFICATIONS
AUDIOLAB
TA-12A
TA-15A
Transducers
LF: 12”×1 HF: 1.7’’×1
LF: 15”×1 HF: 1.7’’×1
Frecuency Response (-3dB)
50Hz-20kHz
45Hz-20kHz
Plastic
Plastic
1100W (RMS)
1100W (RMS)
Cabinet Rated Power Amplifier Type Maximum SPL (1W @ 1m)
13
Side View
Class D
Class D
130dB (Peak)
133dB (Peak)
Front View
SPECIFICATIONS
- 2 way active full range speaker - One 15”woofer - One 1.7” compression driver - Class D power amplifier Side View - Rugged ABS enclosures - Heavy duty protective grill - Integrated Monitor feet allow the easy stage monitor application TA-12A
TA-15A
Rated Impedance
8Ω
8Ω
Input Impedance
Bal. 20kΩ, Unb. 10kΩ
Bal. 20kΩ, Unb. 10kΩ
Connectors
XLR/TRS
XLR/TRS
Dispersion (H x V)
90° x 60°
90° x 60°
Power Supply
115V/230V
110V/220V
Dimensions (W x D x H)
368x349x630 mm. / 14.5x13.7x24.8 in.
450x396x780 mm. / 17.7x15.6x30.7 in.
Net Weight
21.5 Kg. / 47.4 Lbs.
28.7 Kg. / 63.27 Lbs.
TA-12A & TA-15A / 3.1 SOUND REINFORCEMENT
3.2 TA-10A / TA-212
Top View
17.7’’
AUDIOLAB
14
Top View
14.5’’
30.7’’
3.1 TA-12A / TA-15A
13.7’’
3. Sound Reinforcement
15.6’’
Extraordinary performance. The TA Series is built to succed. Lighter, louder and clearer than you can imagine.
24.8’’
3. SOUND REINFORCEMENT / RS & MF SERIES
TA-12A / TA-15A / Light - Portable - Self-Powered
14
Frequency response & Impedance curve
Top View
Top View
20.4’’
108
100
36
90
-36
80
-108
70
-180
60
2
5
1 02
0
5 01
2
5
H
1
0
20
20
90
100
70
80
10
20
50
100
1000
Frequency (Hz)
Frequency (Hz)
- 2 way active full range speaker - One 10”woofer - One 1.4” compression driver - Class D power amplifier Front View - Rugged ABS enclosures - Heavy duty protective grill - Integrated Monitor feet allow the easy stage monitor application
Features
Side View
Front View
AUDIOLAB
TA-10A
TA-212A
Transducers
LF: 10”×1 HF: 1.4’’×1
2 x 12” with 4” V.C.
Frecuency Response (-3dB)
55Hz-20kHz
31.5Hz-120Hz
Connectors
XLR/TRS
XLR/TRS
Plastic
Plastic
Power Supply
115V/230V
110V/220V
Rated Power
550W (RMS)
2000W (RMS)
Dimensions (W x D x H)
306x238x516 mm. / 12x9.4x20.3 in.
460x520x720 mm. / 18.1x20.4x28.3 in.
Amplifier Type
Class D
Class D
Net Weight
13.8 Kg. / 30.4 Lbs.
41 Kg. / 90.4 Lbs.
124dB (Peak)
135dB (Peak)
Cabinet
Maximum SPL (1W @ 1m)
SPECIFICATIONS
- Active subwoofer - Two 12” woofers with 4” V.C. - Class D power amplifier Side View - Rugged ABS enclosures - Heavy duty protective grill - Integrated Monitor feet allow the easy stage monitor application TA-10A
TA-212A
Rated Impedance
8Ω
4Ω
Input Impedance
Bal. 20kΩ, Unb. 10kΩ
Bal. 20kΩ, Unb. 10kΩ
Front View
23.6’’
Features
Features
Top View
- High output SPL and sensitivity. - Built-in power amplifier module. - 1 x 18” high power low frequency transducer with 100mm voice coil. - Master volume control. - XLR input and output connectors. - Phase switch. - Computer aided design to optimise frequency and phase response. - Cabinet designed for FOH use. - Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinet. - Powder coated grill with foam backing. - Durable Polyurethane textured base paint. SPECIFICATIONS
RS-18A
RS-215
LF: 18”×1 -
LF: 15”x2 HF: 3”x1 Compression Driver
40Hz-300Hz
45Hz-16kHz
Construction
18mm Birch Plywood
15mm Birch Plywood
Rated power
500W (RMS) 1000W (Program) 2000W (peak)
600W (RMS) 1200W (Program) 2400W (peak)
-
90 ° x 40°
Transducers Frecuency Response (-3dB)
Dispersion(H×V)
10000
4 20000
42.3’’ 20.9’’
28.3’’
25.2’’
21.6’’
20.9’’
Features
30
Frequenc y response cur ve Impedanc e curve
Im pedance (Oh ms )
110
Sensitivity (dB)
Frequenc y Response 2nd Distor tion 3rd Distor tion
110
Sensitivity (dB )
9.4’’
18.1’’
dBS
180
Top View
Front View
- 2 x15” high power Neodymium transducers with 75mm voice coil - Computer aided design to optimise frequency and phase response - Cabinet design for FOH use - Suitable for use as a main system with or without sub speaker augmentation - Portable system (stand), or permanent installation (wall, ceiling) - Adjustable flying track on the top and bottom of the speaker - Powder coated grill with foam backing - Durable Polyurethane textured base paint SPECIFICATIONS
RS-18A
RS-215
8Ω
4Ω
Crossover
-
1.8kHz
Connector
1 x Combo 6.35/XLR Input 1 x XLR Output
2 x NL4
124dB/130dB (peak)
126dB/132dB (peak)
Net Weight
38 kg. / 83.6 lbs.
48 kg. / 105.6 lbs.
Dimensions
600x640x550 mm. / 23.6x25.2x21.7 in.
530x530x1075 mm./ 20.9x20.9x42.3 in.
Rated Impedance
Maximum SPL (1W @ 1m)
RS-18A & RS-215 / 3.3 SOUND REINFORCEMENT
The RS Series is a profesional sound reinforcement series. Born to satisfy the most demanding costumers in large-medium scale applications. 120
12’’
Hi-Fi - Portable - Loud
AUDIOLAB
RS-215 /
Self-Powered - Portable - Loud
Frequency response & Impedance curve
SPECIFICATIONS
15
RS-18A /
Extraordinary performance. The TA Series is built to succed. Lighter, louder and clearer than you can imagine.
20.3’’
3.2 SOUND REINFORCEMENT / TA-10A & TA-212A
TA-10A / TA-212A / Light - Portable - Self-Powered
16
18.2’’
Front View
Front View
17.3’’
Features
Top View
- 2 way active full range speaker. One 12’’ woofer - One 3” compression driver with titanium diaphragm - Bi-amplifier design for independant HF, LF, active frequency compensation , auto electrical limit protection adjust for LF/HF - Cabinet built with high intensity materials. Flying point in the cabinet, support hole in the bottom. - High sensitivity, MF/HF is very clear and LF is very powerful
AUDIOLAB
System Cabinet Configuration Frequency Response
MF-12A
High intensity configuration
19
4.2 ALM-2432 / ALM-2440
20
Top View
- 2 way active full range speaker. One 15’’ woofer - One 3” compression driver with titanium diaphragm - Bi-amplifier design for independant HF, LF, active frequency compensation , auto electrical limit protection adjust for LF/HF - Cabinet built with high intensity materials. Flying point in the cabinet, support hole in the bottom - High sensitivity, MF/HF is very clear and LF is very powerful
MF-15A
Built-in Crossover two way full ranger active speaker
4.1 ALM-2416 / ALM-2424
SPECIFICATIONS
MF-12A
MF-15A
Balance:20K Unbalance:10K
Balance:20K Unbalance:10K
~110V/~220V 50Hz Manual select
~110V/~220V 50Hz Manual select
Input Connectors
XLR J3P/XLR K3P
XLR J3P/XLR K3P
Maximum SPL (1W @ 1m)
120dB(Free Field)
120dB(Free Field)
Input Impedance Power Supply
60Hz~16KHz
15mm Birch Plywood
Rated power
HF:100W LF:300W
HF:100W LF:300W
Dispersion (H×V)
80°×50°
80°×50°
Net Weight
30Kg. / 66 lbs.
37 Kg. / 82 lbs.
Frequency adjust
100Hz:±12dB/10Hz:±12dB
100Hz:±12dB/10Hz: ±12dB
Dimensions
377×395×610 mm. / 14.8x15.5x24 in.
458×542×747 mm. / 18x21.3x29.5 in.
AUDIOLAB
Features
4. Professional Mixers
28.3’’
23.6’’
16’’
ALM SERIES / 4. PROFESSIONAL MIXERS
One Speaker, multiple aplications. This is an all-in-one solution for those who need a loudspeaker for sound reinforcement and stage monitoring.
SPECIFICATIONS
17
Flexible - Versatile - Self-Powered
14.5’’
3.4 SOUND REINFORCEMENT / MF-12A & MF-15A
MF-12A / MF-15A /
18
The ALM Series is the AUDIOLAB classic console. Built with the highest standards of quality, the ALM Series is the AUDIOLAB answer for those who demand a classic and trustable console.
Features: Analog classic mixer. Ideal for live use and rental. Flight case included. 4 Versions : 16/24/32/40 channels. 4 Audio Groups. 6 AUX sending channels, pre/post fader switch. Fully featured 7x4 matrix. External power supply.
ALM-2416
ALM-2424
ALM-2432
ALM-2416
ALM-2424
ALM-2432
ALM-2440
ALM-2440
AUDIOLAB
16 channels, LR and M main mixers.
Assignable talkback to all channels can be optional.
24 channels, LR and M main mixers.
Assignable talkback to all channels can be optional.
32 channels, LR and M main mixers.
Assignable talkback to all channels can be optional.
40 channels, LR and M main mixers
Assignable talkback to all channels can be optional.
4 audio groups; 6 AUX sending channels. Each equip with pre/post fader switch.
1kHz oscillator/pink noise generator with patchable external output.
4 audio groups; 6 AUX sending channels. Each equip with pre/post fader switch.
1kHz oscillator/pink noise generator with patchable external output.
4 audio groups; 6 AUX sending channels. Each equip with pre/post fader switch.
1kHz oscillator/pink noise generator with patchable external output.
4 audio groups; 6 AUX sending channels. Each equip with pre/post fader switch.
1kHz oscillator/pink noise generator with patchable external output.
2 stereo channels. Each channel equips with mic and dual-stereo input.
2-track monitoring and replay to LR.
2 stereo channels. Each channel equips with mic and dual-stereo input
2-track monitoring and replay to LR.
2 stereo channels. Each channel equips with mic and dual-stereo input.
2-track monitoring and replay to LR.
2 stereo channels. Each channel equips with mic and dual-stereo input
2-track monitoring and replay to LR.
Fully featured 7x4 matrix; proper dual functionality for FOH/ Monitormixing.
Headphones/earpiece sockets and local monitor outputs.
Fully featured 7x4 matrix; proper dual functionality for FOH/ Monitormixing
Headphones/earpiece sockets and local monitor outputs.
Fully featured 7x4 matrix; proper dual functionality for FOH/ Monitormixing.
Headphones/earpiece sockets and local monitor outputs.
Fully featured 7x4 matrix; proper dual functionality for FOH/ Monitormixing
Headphones/earpiece sockets and local monitor outputs.
Mono channels can be used for left/right mix, LR mono sum, or engineers wedge.
Electronically balanced XLR outputs with +26dBu drive capability.
Mono channels can be used for left/right mix, LR mono sum, or engineers wedge
Electronically balanced XLR outputs with +26dBu drive capability.
Mono channels can be used for left/right mix, LR mono sum, or engineers wedge.
Electronically balanced XLR outputs with +26dBu drive capability.
Mono channels can be used for left/right mix, LR mono sum, or engineers wedge
Electronically balanced XLR outputs with +26dBu drive capability.
Recording capable with channel direct outputs.
Preamp 74dB range with +34dBu input capability.
Recording capable with channel direct outputs.
Preamp 74dB range with +34dBu input capability.
Recording capable with channel direct outputs.
Preamp 74dB range with +34dBu input capability.
Recording capable with channel direct outputs.
Preamp 74dB range with +34dBu input capability.
Matrix external inputs with level trims and common input.
Ultra low noise mix head amp design.
Matrix external inputs with level trims and common input.
Ultra low noise mix head amp design.
Matrix external inputs with level trims and common input.
Ultra low noise mix head amp design.
Matrix external inputs with level trims and common input.
Ultra low noise mix head amp design.
Stereo channel can be independently allot to left and right.
Built-in combiner for redundant backup supply, with MPS12 PLUG (16 to 32 channels model).
Stereo channel can be independently allot to left and right.
Built-in combiner for redundant backup supply, with MPS12 PLUG (16 to 32 channels model).
Stereo channel can be independently allot to left and right.
Built-in combiner for redundant backup supply, with MPS12 PLUG (16 to 32 channels model).
Stereo channel can be independently allot to left and right.
Built-in combiner for redundant backup supply, with MPS12 PLUG (16 to 32 channels model).
Stereo channel mic inputs can cross patch into matrix for ambience feed.
Uses RPS11 high performance external linear power supply.
Stereo channel mic inputs can cross patch into matrix for ambience feed.
Uses RPS11 high performance external linear power supply.
Stereo channel mic inputs can cross patch into matrix for ambience feed.
Uses RPS11 high performance external linear power supply.
Stereo channel mic inputs can cross patch into matrix for ambience feed.
Uses RPS11 high performance external linear power supply.
Responsive 4 band,2 sweep EQ; 100Hz high pass filter.
Provide RPS11 backup socket additionally; (for 40 channels)
Responsive 4 band,2 sweep EQ; 100Hz high pass filter.
Provide RPS11 backup socket additionally; (for 40 channels)
Responsive 4 band,2 sweep EQ; 100Hz high pass filter.
Provide RPS11 backup socket additionally; (for 40 channels)
Responsive 4 band,2 sweep EQ; 100Hz high pass filter.
Provide RPS11 backup socket additionally; (for 40 channels)
Individual phantom power and polarity switching.
100mm dustproof pan.
Individual phantom power and polarity switching.
100mm dustproof pan.
Individual phantom power and polarity switching.
100mm dustproof pan.
Individual phantom power and polarity switching.
100mm dustproof pan.
Wide angle channel and master meters.
Individual circuit card assembly with nutted pots.
Wide angle channel and master meters.
Individual circuit card assembly with nutted pots.
Wide angle channel and master meters.
Individual circuit card assembly with nutted pots.
Wide angle channel and master meters.
Individual circuit card assembly with nutted pots.
Internal jumper plugs for pre/post-EQ AUX, direct out and other options.
Sys-link V2 console input/output lining option.
Internal jumper plugs for pre/post-EQ AUX, direct out and other options.
Sys-link V2 console input/output lining option.
Internal jumper plugs for pre/post-EQ AUX, direct out and other options.
Sys-link V2 console input/output lining option.
Internal jumper plugs for pre/post-EQ AUX, direct out and other options.
Sys-link V2 console input/output lining option.
Mutes ,level and AFL on all fader masters
4-pin XLR lamp sockets.
Mutes ,level and AFL on all fader masters
4-pin XLR lamp sockets.
Mutes ,level and AFL on all fader masters
4-pin XLR lamp sockets.
Mutes ,level and AFL on all fader masters
4-pin XLR lamp sockets.
Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in.
Weight: 18 kg. / 39 lbs.
Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in.
Weight: 18 kg. / 39 lbs.
Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in.
Weight: 18 kg. / 39 lbs.
Dimensions: 609x560x150 mm. / 24 x 22 x 5.9 in.
Weight: 18 kg. / 39 lbs.
ALM-2432 & ALM-2440 / 4.2 PROFESSIONAL MIXERS
Classic - Trustable - Compact
AUDIOLAB
4.1 PROFESSIONAL MIXERS / ALM-2416 & ALM-2424 19
ALM-2416 / ALM-2424 / ALM-2432 / ALM-2440
20
The DSP Series is an all-in-one digital processor, including crossover, equalizer, limiter, polarity selector, gain & delay. One processor for all applications. Touring gear.
DSP-4x8
DSP-2x6
5.
Processors 5.1 DSP-2x6 / DSP-4x8
22 OUTPUT SPECIFICATIONS
DSP-4x8
AUDIOLAB
Features
Gain
-12dB ~ +12dB Step distance 0.1dB
- Digital Processor with 2 inputs/6 outputs or 4 inputs/6 outputs - Input/Output XLR connectors - Feedback elimination - Auto-EQ Function - Pink Noise generator - Polarity Selector - Crossover / Limiter / Gain / Delay - Parametric Equalizer
Delay
Longest delay 1000 ms, can display in the computer by M or Ft.
INPUT SPECIFICATIONS
Polarity Crossover Filter Type Frequency Point
DSP-2x6
Every channel have input mute (ON/OFF)
Delay
Longest delay 1000 ms
Parameter Equalizer
Link-Ril / Buttworth / Bessec 20Hz ~ 20KHz 12dB, 18dB, 24dB, 48dB
Limiter
Threshold: -20dBu ~ 20dBu Attack: 0.3ms-100ms Release: Can be set to start time’s 2, 4, 6, 8, 16 or 32 times.
Parameter Equalizer
in Paramerer Frequency point: 20Hz ~ 20KHz Bandwidth: 0.05 ~ 3 Oct/w Gain: -20dB ~ +20dB
In Lo-Shelf and Hi-Shelf
Frequency point: 20Hz ~ 20KHz Gain: -20dB~+20dB Slope: 6dB, 12dB
Pol (+) or Pol (-) Every channel can set 6 parameter EQ (EQ-EQ6)
Pol (+) or Pol (-)
Slope
DSP-4x8
Mute
Polarity
21
DSP-2x6
DSP-2X6 & DSP-4X8 / 5.1 PROCESSORS
All-in-one - Digital - Limitless
AUDIOLAB
5. PROCESSORS / DSP SERIES
DSP-2x6 / DSP-4x8 /
22
WWW.AUDIOLAB-WEB.COM
WWW.AUDIOLAB-WEB.COM
WWW.AMERICAN-PRO.COM