What is the difference between CAD and ECAD? Even in today’s world, you can find most of the engineers using CAD software today as it is quite simple and familiar. There are lots of electrical CAD software users for realizing large productivity enhancement over the use of basic CAD. ECAD contains specialized functions, templates, and symbols for increasing design efficiency unlike standard CAD software, it removes the manual task-related errors.
CAD vs ECAD In ECAD software and traditional CAD, there are lots of differences going to be highlighted over here. AutoCAD pitted a productivity study conducted by Autodesk which stated head to head against AutoCAD Electrical. There are 10 common control tasks used by the eCAD users for working rapidly quicker. For instance: The new designs were created at a face which was 84 % faster and the current designs were 77 % faster. There was a current schematic current which occurred at a speed of 61% from the creation of panel layouts. The average amount of time required was about 36 minutes, 52 seconds by the AutoCAD users software for completing all the tasks. Only 7 minutes and 37 seconds are required by the users of Electrical AutoCAD software and 80% was the overall productivity gain. For completing the same tasks only 30 % of fewer commands were required thereby the risk of errors is greatly reduced. Errors are reduced due to tasks like numbering the wires and cross-referencing that are automatically handled. PLC data is edited by the user of the software, wired list requires exporting the tags and generate bills of materials (BOMs). Schmidtke has worked with EPLAN electric P8 due to the awareness of the advantages of eCAD and promise e-software packages. Schmidtke explains that when it comes to eCAD the Europeans are considerably and they are moving quickly to EPLAN architecture of a database. An Automated Panel Expert (APE) software has been by introduced to DRC in response to the capabilities of eCAD. In front of the eCAD APE is a configuration that runs in front of eCAD take benefit of eCAD abilities for setting up queries and rapidly generate a set of intelligent documents. For electrical needs, if the eCAD programs make computer-aided drawing software to automate design task relying on specific industries like HVAC, water/wastewater, air filtration or energy. Automated Programming Interface uses EPLAN, feed EPLAN Electric P8 is a complete set of instruction drafting for each ordered panel. For diagnosing the drawings for accuracy and production reports generations along with PDF schematics and machine tool instructions.
In APE power generations there are lots of time left for programming which was needed to create the engineering documentation. Individual aspects of a circuit are not available in DRC using eCAD software like protection sizing and wire gauge as it can avoid lots of times and reduce errors. Join the electrical CAD course to know more about CAD vs eCAD.