2014 FALL-WINTER
The Measure of Precision™ FOR MORE INFORMATION VISIT www.deltamachinery.com
For more than 95 years, Delta has designed and manufactured quality and dependable woodworking machinery. From our early design of the table saw up through the introduction of the products shown in this catalog, Delta has always considered the woodworker in our design process and the manufacturing of our equipment. It is the woodworker’s demand for precision and quality that has driven us to be unparalleled manufacturers of machinery that you can depend on. You can expect our machinery to be passed down for many generations to come. We, at Delta, are proud of our heritage and will continue to design and manufacture the best woodworking machinery money can buy.
i
SAWS
1-13
PLANER
14
JOINTER
15
SANDERS
16-20
LATHE
21
GRINDING
22
DRILLING
23-24
DUST COLLECTION
25-26 27 ii
Table Saw 36-L552 TYPE 2 Table Saw • Single Cast-Iron Trunnion System results in incredible vibration control providing continuous, smooth operation and dependable accuracy • The Bevel Dial allows fine tuning of the blade bevel and provides accuracy you can trust to within 1/4° • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. Then, add the anti-kickback pawls and guard to the riving knife without tools • The Cabinet consists of a large cast iron base • Table Top provides more surface area to stabilize the product and offers outstanding smoothness • Largest Blade Opening in the class • Features a Push button arbor lock which makes blade changes simple • Large, Easy to Access ON/OFF switch • Bi-Level Dust Extraction uses only 1 collector hose, and the new closed bevel gauge provides a sealed interior • BIESEMEYER® Fence System with hairline pointer, built-in tape, 9-ply fence faces, and improved cam lock allows you to make precision set-ups • UL Listed
Dual Front Cranks
Cast Iron Base
Storage
Dual Front Cranks make adjusting blade height and blade bevel easy and accurate
The cabinet consists of a large cast iron base
On-Board Miter Gauge, Wrench, and Push Stick Storage is conveniently located on sides of the cabinet
Stock No.
Description
36-L552 TYPE 2
5 HP Motor 10 in. UNISAW® with 52 in. BIESEMEYER® Fence System
36-L336 TYPE 2
3 HP Motor 10 in. UNISAW® with 36 in. BIESEMEYER® Fence System
36-L352 TYPE 2
3 HP Motor 10 in. UNISAW® with 52 in. BIESEMEYER® Fence System
For pricing please visit local dealer listings (pg. 28) 1
Accessories
(Check website for availability)*
For Current Unisaw
34-154 Standard Table Insert
36-0101 Delta Table Saw Arbor Wrench
36-808 Unisaw Dado Throat Plate
34-184 Universal Tenoning Jig
36-050 Table Saw Push Stick
50-257 Mobile Base For Saw 52 in. Fences
78-967 Thin Kerf Riving Knife
34-929 Deluxe Miter Gauge
36-201 Standard & Dado Arbor Nut Assembly
50-2000 Mobile Base For Saw 30 in. Fences
34-976 Uniguard速 Blade Guard
36-805 Unisaw Zero Clearance Throat Plate
78-9450 Outfeed Table
78-970 Unisaw Accessory Drawer
*For accessories not lisited please visit www.deltamachinery.com
2
10 in. Table Saw
NEW 36-5000 / 36-5100 10 in. Table Saw • Unique Tubular Stand for maximum support and stability • Ease of mobility with two fixed wheels and one swivel wheel • 36-5000 has cast iron table top with 1-LH and 2-RH stamped steel extension wings • 36-5100 has cast iron table top with LH and RH cast iron extension wings • Plus additional RH stamped steel extension wing • Heavy duty one piece rail system for precision cuts every time • Heavy Duty Biesemeyer style fence with dual rip windows • Quick Assembly stand with less parts, allows fast assembly • Blade Brake stops the blade within seconds of the power being turned off • Large, Easy to Access ON/OFF switch • Industry Standard tool-free split guard design allows a true rise-and-fall riving knife by using a lever on the inside of the throat plate. Tool-less assembly of riving knife and anti-kickback pawls • UL Listed
(36-5100 Shown)
Storage
Swivel Wheel
Miter Gauge
Each of the 5000 series saws has on-tool storage for its included accessories
Ease of mobility with two fixed wheels and one step actuated swivel pedal
Precision miter gauge with 9 denoted stops at most popular angles
Stock No.
Description
36-5000
DELTA 10 in. Left Tilt Contractor Saw With 30 in. RH Rip (Steel Wings)
36-5100
DELTA 10 in. Left Tilt Contractor Saw With 30 in. RH Rip (Cast Iron Wings)
For pricing please visit local dealer listings (pg. 28) 3
Accessories
(Check website for availability)*
36-501 Zero Clearance Throat Plate
34-976 Uniguard速 Blade Guard (Requires fabrication adapter plate)
36-502 Dado Table Insert
34-184 Universal Tenoning Jig
Model #
34-929 Deluxe Miter Gauge
Tooth Count
34-019 24T Rip Blade 34-020 40 Tooth General Purpose 34-022 60 Tooth General Purpose 34-023 80 Tooth Ultra-Fine Cut
*For accessories not listed please visit www.deltamachinery.com
4
10 in. Table Saw
NEW 36-5052 / 36-5152 Contractor Saw • Unique Tubular Stand for maximum support and stability • Ease of mobility with two fixed wheels and one swivel wheel • 36-5052 has cast iron table top with 1-LH and 2-RH stamped steel extension wings • 36-5152 has cast iron table top with LH and RH cast iron extension wings • Heavy duty one piece rail system for precision cuts every time • Heavy duty RH extension board with support legs • Heavy duty Biesemeyer style fence with Dual rip windows • Quick Assembly stand with less parts, allows fast assembly • Blade Brake stops the blade within seconds of the power being turned off • Large, Easy to Access ON/OFF switch • Industry Standard tool-free split guard design allows a true rise-and-fall riving knife by using a lever on the inside the throat plate. Tool-less assembly of riving knife and anti-kickback pawls • UL Listed
Storage
Swivel Wheel
Miter Gauge
Each of the 5000 series saws has on-tool storage for its included accessories
Ease of mobility with two fixed wheels and one step actuated swivel pedal
Precision miter gauge with 9 denoted stops at most popular angles
Stock No.
Description
36-5052
DELTA 10 in. Left Tilt Contractor Saw With 52 in. RH Rip (Steel Wings)
36-5152
DELTA 10 in. Left Tilt Contractor Saw With 52 in. RH Rip (Cast Iron Wings)
For pricing please visit local dealer listings (pg. 28) 5
Accessories
(Check website for availability)*
36-501 Zero Clearance Throat Plate
34-976 Uniguard速 Blade Guard (Requires fabrication adapter plate)
36-502 Dado Table Insert
34-184 Universal Tenoning Jig
Model #
34-929 Deluxe Miter Gauge
Tooth Count
34-019 24T Rip Blade 34-020 40 Tooth General Purpose 34-022 60 Tooth General Purpose 34-023 80 Tooth Ultra-Fine Cut
*For accessories not listed please visit www.deltamachinery.com
6
Accessories
(Check website for availability)*
For Pre-2008 Unisaws & 10 in. Saws
34-154 Standard Insert Rt Tilt Saw Only
36-861 Standard Insert
36-201 Standard & Dado Arbor Nut Assembly
7
34-264 Dado Insert
36-862 Zero Clearance Insert
50-273 Mobile Base Unisaw
34-868 Disappearing Splitter
36-0101 Delta Table Saw Arbor Wrench
50-284 Mobile Base Ext. 52 in. Unisaw
*For accessories not listed please visit www.deltamachinery.com
36-847 Dado Insert
36-050 Table Saw Push Stick
50-345 Universal Mobile Base (with Stand; supports up too 300 lbs.)
Fence & Rail System BC30T2 / BC50T2
BIESEMEYER® T-Square Fences Kit • One piece 14 gauge 2” by 3” rectangular steel guide tube, mounted onto 1/4” section angle iron rail • Mounting design attaches to Delta® and most other table saws with cast iron tables • Laminated 9 ply Birch Plywood sides are durable and non-marring • Fence body constructed of 14 gauge welded steel • Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0.4mm) • Easy-gliding, on solid nylon pads, with quick action handle with magnets to hold handle up in release position, for easy positioning • Fence securely clamps to both front tube only to insure perfectly parallelism to the blade front and back • Quick-removal fence can be located on either side of the blade for consistent ripping capabilities on left or right tilt saws
Stock No. Description BC30T2
64 in BIESEMEYER® T-Square Fence Kit
BC50T2
84 in BIESEMEYER® T-Square Fence Kit
36-T30T3/ 36-T50T3 T-Square Fences
• One piece square tubular rail • Mounting design attaches to Delta® table saws including Contractor Saw®, Hybrid Saw®, and Unisaw® models • Extruded aluminum faces attach to steel tubing for years of continuous use • Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0.4mm) • Precision adjustments to square and level fence • Easy-gliding, steel tube fence body to handle quick, precision ripping, and square cuts • Fence securely clamps to both front tube and hooks over rear rail to allow for fence attachments • Quick-removal fence can be located on either side of the blade for consistent ripping capabilities on left or right tilt saws • Tape located on both RH and LH side of blade • 36-T50T3 comes with wood table board #36-T53
Stock No. Description 36-T30T3 36-T50T3
62 1/2 in T-Square Fence
82 1/2 in T-Square Fence
For pricing please visit local dealer listings (pg. 28) 8
Stock Feeder 36-850 Stock Feeder • Continuous-duty motor powers the lubricated gear box • Fully-adjustable support columns. Large hand wheels move feeders horizontally or vertically along columns • The 36-850 includes 1/4 HP, 120 V, Reversing Motor, 3 rubber feed rollers, vertical and horizontal support columns, universal joints and lubricating fittings, additional set of speed-changing gears
Stock No.
Description
36-850
1/4 HP 1 Phase 4 speed 3 Roller Production Stock Feeder
For pricing please visit local dealer listings (pg. 28)
Accessories
(Check website for availability)*
36-857 Stand
9
Part #: 1340360 Drive Wheel
*For accessories not listed please visit www.deltamachinery.com
Miter Saw Stand Coming in December 36-267 Miter Saw Stand • Constructed of large OD steel tubing to support up to 350 Lbs. • One-Step set up and fold using the foot actuated pedal • Designed to hold virtually any miter saw on the market even the larger 12” units • Easy clamp-on miter saw mounts • Large wheels and wide rubber, semi-pneumatic, tires • Designed for the storage of the folded stand, with miter saw mounted
Stock No. Description 36-267
Mobile Miter Saw Stand
For pricing please visit local dealer listings (pg. 28) 10
Band Saw 28-400 Band Saw • Heavy duty steel frame design • Aluminum trunnion table support • Durable aluminum, rubber-coated upper and lower 9 spoke wheels are precision balanced • Standard 3/4” x 3/8” T-slot • Larger insert for visibility when changing lower guide settings • Includes 4 in. dust port, steel stand and a wood-cutting blade • UL Listed
Blade
Two Speed Drive
Oversized Table
Precision ball bearing upper and lower blade guides ensure consistent tracking for accurate cutting performance
9 spoke aluminum wheels for durability, with replaceable tires
Table tilts 0°-45° for bevel cutting
Stock No.
Description
28-400
14 in. 1 HP Steel Frame Band Saw
For pricing please visit local dealer listings (pg. 28) 11
Accessories
(Check website for availability)*
Model # 28-033 28-034 28-036 28-038 28-040 28-045 28-046 28-047 28-050 28-052 28-073 28-074 28-075 28-168 28-564 28-565 28-567 28-568
Model # 28-062 28-064 28-176 28-177 28-225 28-227 28-228 28-229 28-580
Model # 28-165 28-167
Size 93 1/2 in. x 3/16 in. x 6 93 1/2 in. x 1/4 in. x 6 93 1/2 in. x 3/8 in. x 6 93 1/2 in. x 1/2 in. x 6 93 1/2 in. x 3/4 in. x 4 105 in. x 1/8 in. x 14 105 in. x 3/16 in. x 6 105 in. x 1/4 in. x 6 105 in. x 1/2 in. x 6 105 in. x 3/4 in. x 4 80 in. x 1/8 in. x 14 80 in. x 1/4 in. 6 80 in. x 3/8 in. x 6 56 1/8 in. x 3/8 in. x 6 82 in. x 1/4 in. x 14 82 in. x 1/8 in. x 14 82 in. x 1/4 in. x 6 82 in. x 3/8 in. x 6
TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI TPI
Size 93 1/2 in. x 1/2 in. x 18 TPI Metal Cutting 93 1/2 in. x 1/2 in. x 24 TPI Metal Cutting 59 1/2 in. x 1/4 in. x 6 TPI 59 1/2 in. x 1/4 in. x 6 TPI 72 1/2 in. x 1/8 in. x 14 TPI 72 1/2 in. x 1/4 in. x 6 TPI 72 1/2 in. x 3/8 in. x 6 TPI 72 1/2 in. x 1/2 in. x 6 TPI 82 in. x 1/2 in. x 3 TPI
Size 56 1/8 in. x 1/4 in. x 6 TPI 56 1/8 in. x 1/8 in. x 14 TPI
Model # 28-061 28-063 28-066 28-073 28-074 28-075 28-076 28-079 28-080 28-081 28-083 28-084 28-086 28-087 28-088 28-089 28-090 28-091 28-096 28-097 28-098 28-099 28-102 28-103 28-108 28-109 28-124 28-126 28-128 28-129 28-178 28-222 28-223 28-224 28-226 28-232 28-253
25-870 Magnetic Work Light
*For accessories not listed please visit www.deltamachinery.com
Size 56 1/8 in. x 3/16 in. x 10 TPI RK Series 56 1/8 in. x 1/4 in. x 6 TPI PC Series 105 in. x 3/8 in. x 4 TPI PC Series 80 in. x 1/8 in. x 14 TPI 80 in. x 1/4 in. 6 TPI 80 in. x 3/8 in. x 6 TPI 56 1/8 in. x 3/8 in. x 4 TPI PC Series 72 1/2 in. x 3/16 in. x 10 TPI RK Series 72 1/2 in. x 1/4 in. x 6 TPI PC Series 72 1/2 in. x 1/2 in. x 4 TPI PC Series 93 1/2 in. x 1/8 in. x 14 TPI HP Series 93 1/2 in. x 3/16 in. x 10 TPI RK Series 93 1/2 in. x 1/4 in. x 6 TPI PC Series 93 1/2 in. x 1/4 in. x 10 TPI RK Series 93 1/2 in. x 3/8 in. x 6 TPI PC Series 93 1/2 in. x 1/2 in. x 3 TPI PC Series 93 1/2 in. x 1/2 in. x 4 TPI PC Series 93 1/2 in. x 3/4 in. x 3 TPI AS-S Series 105 in. x 1/8 in. x 14 TPI HP Series 105 in. x 3/16 in. x 10 TPI RK Series 105 in. x 1/4 in. x 4 TPI PC Series 105 in. 1/4 in. x 6 TPI PC Series 105 in. x 1/2 in. x 3 TPI PC Series 105 in. x 3/4 in. x 3 TPI AS-S Series 111 in. x 3/16 in. x 10 TPI RK Series 111 in. x 1/4 in. x 4 TPI PC Series 111 in. x 1/4 in. x 6 TPI PC Series 111 in. x 3/8 in. x 4 TPI PC Series 111 in. x 3/4 in. x 3 TPI AS-S Series 111 in. x 3/4 in. x 2/3 TPI VPC Series 59 1/2 in. x 3/8 in. x 6 TPI 142 in. x 1/4 in. x 6 TPI PC Series 142 in. x 3/8 in. x 4 TPI PC Series 142 in. x 1/2 in. x 3 TPI PC Series 142 in. x 3/4 in. x 2/3 TPI VPC Series 142 in. x 3/4 in. x 3 TPI AS-S Series 142 in. x 1 in. x 2 TPI PC Series
50-345 Universal Mobile Base (with Stand; supports up too 300 lbs.)
12
Scroll Saw 40-694 Scroll Saw • Electronic variable speed can be adjusted from 400-1,750 SPM • Unique dual parallel-link arm design reduces vibration and noise, also keeps the blade perpendicular to the work surface which dramatically reduces over or under cutting • Upper arm lifts and locks in the raised position during blade changes • On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever conveniently located up front for easy accessibility • Tool-free blade clamp • Single lever, tool-free blade tensioning • Large, cast-iron table provides excellent material support and bevels 0° - 45° left and right • On-tool blade storage area, includes 2 straight blades • CSA Listed
Stock No. Description 40-694 20 in. Variable Speed Scroll Saw
For pricing please visit local dealer listings (pg. 28)
Accessories
(Check website for availability)*
Model # 40-517 40-518 40-519 40-520 40-521 40-610 40-621 40-622
13
Size Qty
#2 Precision Ground Tooth Scroll Saw Blades #5 Precision Ground Tooth Scroll Saw Blades #7 Precision Ground Tooth Scroll Saw Blades #9 Precision Ground Tooth Scroll Saw Blades #12 Precision Ground Tooth Scroll Saw Blades #9R Precision Ground Tooth Scroll Saw Blades #7R Precision Ground Tooth Scroll Saw Blades #5R Precision Ground Tooth Scroll Saw Blades
2 2 2 2 2 2 2 2
40-696 Scroll Saw Stand
*For accessories not listed please visit www.deltamachinery.com
25-870 Magnetic Work Light
Planers 22-450 Planer
• Magnetic Motor Starter and Automatic Reset Overload Protection • Three-knife cutterhead • Sectional serrated infeed roller • Double bed rollers with polyurethane outfeed roll • Up-front controls for engaging and disengaging feed rolls • Push-button on/off switch • Large precision-ground table with two adjustable bed rolls • Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick set-ups • A large hand wheel with locking knob adjusts table height • CSA Listed
Stock No. Description 22-450
20 in. DC-580 3 Phase Planer
22-555 Planer NEW
• Powerful 15A motor • Four column design provides excellent stability • Quick change knife system with dual edge disposable knives lets you change knives without difficult-to-use alignment jigs • Adjustable infeed and outfeed tables • Reversible dust port allows you to collect chips from the right or left side of the planer • Two polyurethane feed rollers positioned close to the cutterhead to improve workpiece finish • Precision machined steel cutterhead • Stainless steel bed • Overload protects motor from damage due to overheating • CSA Listed
Stock No.
Description
22-555
13 in. Portable Thickness Planer
For pricing please visit local dealer listings (pg. 28)
Accessories
(Check website for availability)*
Model # 22-547 22-549 22-562 22-591
Size Qty 12 in. High Speed Steel Planer Knives 13 in. Planer Knives 12 1/2 in. Planer Knives 13 in. Planer Knives
2 2 2 3
50-345 Universal Mobile Base (with Stand; supports up too 300 lbs.)
*For accessories not listed please visit www.deltamachinery.com
22-592 Universal Planer Stand
14
Jointer
NEW 37-071 Jointer • Durable cast iron construction • Precision machined table and fence ensures accuracy • Heavy duty, cast iron fence support • Simple fence adjustment • Up to 1/8 in. depth of cut • Aluminum cutterhead with two knives • Built-in dust blower ejects chips efficiently and virtually eliminates clogged dust chute • Includes a pair of push blocks for easily and safely moving material through the jointer • CSA Listed
Stock No. Description 37-071
6 in. MIDI-Bench Jointer
For pricing please visit local dealer listings (pg. 28)
Accessories
(Check website for availability)*
Model # 37-072 37-155 37-355 37-363
15
Size Cutterhead Knives Cutterhead Knives 8”Cutterhead Knives Cutterhead Knives
Qty 2 3 3 3
37-073 Dust Bag With Clamp
*For accessories not listed please visit www.deltamachinery.com
Sanders 31-140 Sander • Heavy duty cast iron construction • Powerful 1/2 HP, 120V motor • Convenient top-mounted manual brake stops sanding disc in seconds • Heavy-duty, steel disc plate features a 12 in. diameter, 80 grit abrasive disc • Tilting cast-iron table with left and right positive stops at 22.5°, 45° and 90° locks in position with one dual-purpose lock and bevel table adjustment handle • Integral dust collection fan • Dust hose with 2 1/4 in. O.D. connectors attaches quickly to any standard shop vacuum • Features a 3/8 in. x 3/4 in. miter gauge slot • Cast-iron base with pre-drilled mounting holes • Includes miter gauge, hose with 2 1/4 in. O.D. connectors, 80 Grit abrasive disc, wrenches • CSA Listed
Stock No. Description 31-140
12 in. Disc Sander
31-481 Sander • Industrial 3 HP, 230 V, 60 Hz, 1/6 HP, belt motor with feed speeds from 3 FPM to 20 FPM; drum speed 1,550 RPM • Independent adjustment dials ensure rear drum is level • Heavy duty steel frame design • Latching top door provides direct access to dual drums • Tool-less drum wrap tensioning clamps • Magnetic on/off main motor switch • Two 4 in. dust ports for efficient dust collection requiring a total of only 600 CFM includes feed belt, sanding drums, 80 grit and 120 grit sanding strips • CSA Listed
Stock No. Description 31-481
26 in. Dual Drum Sander
For pricing please visit local dealer listings (pg. 28) 16
Sanders 31-482 Sander • Powerful 1 1/2 HP, dual voltage 115V/230V (wired 230V), 1 phase motor with 3,900 SFPM belt speed and 108 OPM • 1/4 in. belt oscillation • Table height easily adjusts to position workpiece on the sanding belt • Allows contour and inside curve sanding using the 9 3/4 in. x 11 3/4 in. cast iron table attachment around the 4 1/4 in. end pulley • Adjustable 24 in. x 4 in. fence for horizontal sanding • Precision ground steel platen with graphite pad helps keep the platen cool during operation • Large, 29 3/4 in. x 10 in. cast iron support table with T-slot • Convenient, top-mounted tensioning lever and tracking controls • Integral dust shroud and 4 in. dust port • Includes back stop, sanding drum cast iron support table, miter gauge, tracking tool, fence, 6 in x 89 in. 100 grit sanding belt, and adjustment tools/wrenches • CSA Listed
Stock No.
Description
31-482
6 in. x 89 in. Oscillating Edge Sander
31-483 Sander
• Powerful 1/2 HP, 115V motor • Fully enclosed, heavy duty steel frame construction • 14 3/4 in. x 14 3/4 in. precision ground cast iron table • 15/16 in. oscillating action uses more of the sleeve, prolonging life of the sleeve • 0° to 45° tilting table design • Positive stop at 90° and large bevel scale • Heavy duty, steel table support and bevel system • Smooth precision ball bearings support the main spindle • Worm and gear mechanism drives the oscillations • On-tool storage for accessories • Includes 5 interchangeable threaded spindles with 100 grit sanding sleeves (1/4 in., 1/2 in., 5/8 in., 1 1/2 in., and 2 in.), rubber drums on 1 1/2 in. and 2 in. spindles, 4 inserts, power lock-off pin, 2 1/4 in. to 4 in. dust port adapter and 3 wrenches • CSA Listed
Stock No.
Description
31-483
Heavy Duty Oscillating Bench Spindle Sander
For pricing please visit local dealer listings (pg. 28) 17
Sanders SA350K Sander
• Large, cast-iron table measures 18 in. diameter • Powerful 1/4 HP induction motor with direct drive for quiet, smooth operation. • Built-in dust collection fan • Toggle switch with removable lock out key prevents unauthorized use • Comes complete with table insert for accepting standard-equipment 3/4 in. diameter sanding drum and sleeve • Four accessory table inserts are also available for using sanding drums from 1-3 in. in diameter • On tool storage for accessories • The SA350K includes 1/4 HP, 1 Phase Motor, cast-iron table with 4 1/2 in. long x 3/4 in., 1 in., 1 1/2 in., 2 in. and 3 in. rubber spindles, drum plates, abrasive sleeves and table inserts, dust bag, 3/16 in. Allen Wrench, 1/2 in. socket wrench, 3/4 in. spindle converts to 1/2 in. when rubber drum is removed • CSA Listed
Stock No.
Description
SA350K
Bench Oscillating Spindle Sander with Accessory Kit
31-484 Sander
• Powerful 1 HP, 115V motor • Fully enclosed, heavy duty steel frame construction • 24 5/8 in. x 24 1/2 in. precision ground cast iron table • 1 1/2 in. oscillating action • Unique 0° to 45° tilting spindle arbor design • Adjustable positive stops at 45° and 90° and large bevel scale for accuracy and convenience • Heavy duty, cast iron trunnion system • Oil bath gear box • Smooth precision ball bearings support the main spindle and heavy duty worm and gear mechanism drives the oscillations • Removable rear access panel fix adjustable spindle • Cast iron, chrome polished tilt wheel • On-tool storage for all inserts, spindles and wrenches Includes 10 interchangeable threaded spindles with 100 grit sanding sleeves (1/4 in., 3/8 in., 1/2 in., 5/8 in., 3/4 in., 1 in., 1 1/2 in., 2 in., 3 in., and 4 in.), 6 inserts, power lock-off pin and 2 wrenches • CSA Listed
Stock No. 31-484
Description Heavy Duty Oscillating Floor Spindle Sander
For pricing please visit local dealer listings (pg. 28) 18
Accessories
(Check website for availability)* Spindle Sleeves Model #
19
Size
31-270
4 in. x 9 in. 80 Grit 3 PC. Aluminum Oxide Spindle Sanding Sleeves
31-271
4 in x 9 in. 120 Grit 3 PC. Aluminum Oxide Spindle Sanding Sleeves
31-272
4 in x 9 in. 150 Grit 3 PC. Aluminum Oxide Spindle Sanding Sleeves
31-488
6 PC. 120 Grit Aluminum Oxide Sanding Sleeves- Size Assortment
31-489
3 in. Heavy Duty Oscillating Bench Spindle Sander Drum and Sleeve Kit
31-490
6 PC. 120 Grit Aluminum Oxide Sanding Sleeves- Size Assortment
31-736
3/4 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-737
1 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-738
1 1/2 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-739
2 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-740
3 in. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-741
5 PC. Bench Oscillating Spindle Sander Drum/Sleeve Kit
31-788
6 PC. 1/2 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-789
6 PC. 1/2 in. x 4 1/2 in. 120 Grit Spindle Sanding Sleeves
31-790
6 PC. 1/2 in. x 4 1/2 in. 150 Grit Spindle Sanding Sleeves
31-792
6 PC. 3/4 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-793
6 PC. 3/4 in. x 4 1/2 in. 120 Grit Spindle Sanding Sleeves
31-794
6 PC. 3/4 in. x 4 1/2 in. 150 Grit Spindle Sanding Sleeves
31-796
6 PC. 3/4 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-797
6 PC. 1 in. x 4 1/2 in. 120 Grit Spindle Sanding Sleeves
31-798
6 PC. 1 in. x 4 1/2 in. 150 Grit Spindle Sanding Sleeves
31-805
6 PC. 1 1/2 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-806
6 PC. 1 1/2 in. x 4 1/2 in. 120 Grit Spindle Sanding Sleeves
31-807
6 PC. 1 1/2 in. x 4 1/2 in. 150 Grit Spindle Sanding Sleeves
31-808
6 PC. 2 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-809
6 PC. 2 in. x 4 1/2 in. 120 Grit Spindle Sanding Sleeves
31-810
6 PC. 2 in. x 4 1/2 in. 150 Grit Spindle Sanding Sleeves
31-811
6 PC. 3 in. x 4 1/2 in. 80 Grit Spindle Sanding Sleeves
31-812
6 PC. 3 in. x 4 1/2 in. 120 Grit Spindle Sanding Sleeves
31-813
6 PC. 3 in. x 4 1/2 in. 150 Grit Spindle Sanding Sleeves
31-850
6 PC. 1/4 in. x 6 in. 80 Grit Spindle Sanding Sleeves
31-851
6 PC. 1/4 in. x 6 in. 120 Grit Spindle Sanding Sleeves
31-852
6 PC. 1/4 in. x 6 in. 150 Grit Spindle Sanding Sleeves
31-853
6 PC. 1/2 in. x 6 in. 80 Grit Spindle Sanding Sleeves
31-854
6 PC. 1/2 in. x 6 in. 120 Grit Spindle Sanding Sleeves
31-855
6 PC. 1/2 in. x 6 in. 150 Grit Spindle Sanding Sleeves
31-857
6 PC. 5/8 in. x 6 in. 120 Grit Spindle Sanding Sleeves
31-870
3 PC. 3/4 in. x 9 in. 150 Grit Spindle Sanding Sleeves
31-880
3 PC. 3in. x 9 in. 80 Grit Spindle Sanding Sleeves
*For accessories not listed please visit www.deltamachinery.com
Accessories
(Check website for availability)* Stick-On Discs Model #
Size
31-346 31-347 31-348 31-421
8 in. 50 Grit 2 PC. Aluminum Oxide Stick-On Discs 8 in. 80 Grit 2 PC. Aluminum Oxide Stick-On Discs 8 in. 120 Grit 2 PC. Aluminum Oxide Stick-On Discs 12 in. 50 Grit 2 PC. Aluminum Oxide Stick-On Discs
31-422
12 in. 80 Grit 2 PC. Aluminum Oxide Stick-On Discs
31-423
12 in. 120 Grit 2 PC. Aluminum Oxide Stick-On Discs
Strips Model # 31-485 31-486 31-817 31-818 31-819 31-822 31-833
Size 4 PC. Aluminum Oxide Sanding Strips-Grit Assortment 3 PC. Aluminum Oxide Sanding Strips-Grit Assortment 4 PC. 2 in. x 137 7/8 in. 80 Grit Aluminum Oxide Sanding Strips 4 PC. 2 in. x 137 7/8 in. 120 Grit Aluminum Oxide Sanding Strips 4 PC. 2 in. x 137 7/8 in. 150 Grit Aluminum Oxide Sanding Strips 4 PC. 2 in. x 92 1/2 in. 80 Grit Aluminum Oxide Sanding Strips 3 PC. 5 1/8 in. x 92 1/2 in. 150 Grit Aluminum Oxide Sanding Strips
Sanding Belts Model # 31-371 31-372 31-373 31-375 31-386 31-387 31-388 31-389 31-398 31-400 31-404 31-405 31-406 31-407 31-814
Size 1 in. x 42 in. 50 Grit 5 PC. Aluminum Oxide Sanding Belt 1 in. x 42 in. 80 Grit 5 PC. Aluminum Oxide Sanding Belt 1 in. x 42 in. 120 Grit 5 PC. Aluminum Oxide Sanding Belt 1 in. x 42 in. 220 Grit 5 PC. Aluminum Oxide Sanding Belt 6 in. x 89 in. 80 Grit Aluminum Oxide Sanding Belt 6 in. x 89 in. 100 Grit Aluminum Oxide Sanding Belt 6 in. x 89 in. 120 Grit Aluminum Oxide Sanding Belt 6 in. x 89 in. 150 Grit Aluminum Oxide Sanding Belt 6 in. x 108 in. 150 Grit Aluminum Oxide Sanding Belt 6 in. x 108 in. 120 Grit Aluminum Oxide Sanding Belt 6 in. x 48 in. 100 Grit Aluminum Oxide Sanding Belt 6 in. x 48 in. 50 Grit Aluminum Oxide Sanding Belt 6 in. x 48 in. 120 Grit Aluminum Oxide Sanding Belt 6 in. x 48 in. 150 Grit Aluminum Oxide Sanding Belt 36 in. Drum Sander Conveyor Belt
*For accessories not listed please visit www.deltamachinery.com
20
Lathe 46-460 Lathe • Powerful 1 HP, 1,725 RPM Motor • Large 12 1/2 in. swing capacity provides the largest capacity in its class • Electronic Variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position • Forward and Reversing function with a simple flip of the switch • Patented belt tensioning system for easy and quick speed changes • 6 groove belt provides superior power • Indexing pin to lock the head stock spindle in 24 different locations • All cast-iron construction provides stability and durability • Over Headstock on/off switch provides easy in use access • Ball-bearing live center • Includes 3 in. face plate, 6 in. tool rest and 10 in. tool rest • On board storage for easy access to adjustment tools • Heavy-duty, steel knockout bar • CSA Listed
Stock No. Description 46-460 12 1/2 in. Variable Speed MIDI-LATHE ®
For pricing please visit local dealer listings (pg. 28)
Accessories
(Check website for availability) *
46-407 Midi Inboard French Curl Tool Support
46-461 Nova Chuck
46-490 Tailstock Ball Bearing Center
21
46-462 Midi-Lathe Stand
46-626 6 PC. High-Speed Steel Turning Tools Set
46-463 Midi-Lathe® Modular Bed Extension
46-712 Economy Live Center
*For accessories not listed please visit www.deltamachinery.com
46-464 Midi-Lathe® Modular Stand Extension
46-933 Spur Drive
Grinding & Sharpening
NEW
23-196 Grinder • Variable Speed Control • Upfront variable speed dial, control speeds from 2,000 RPM to 3,400 RPM • Features a 2 1/2 Amp induction-type motor for powerful performance • The left tool rest has a drill bit rest at the correct angle • Two piece tool rests are independently adjustable • Water tray to help keep workpiece cool while grinding • Work light with a separate on/off switch and flexible goose neck • Cast iron base for durability and reduced vibration • Full-size safety shields are clear and have thumb screws for easy adjustment • Includes 36 Grit Coarse Wheel, 60 Grit Wheel, safety shields, work light (bulb not included), and fully-adjustable tool rests • ETL Listed
Stock No.
Description
23-196
6 in. Variable Speed Grinder
23-197 Grinder
• Variable Speed Control • Upfront variable speed dial, control speeds from 2,000 RPM to 3,400 RPM • Features a 5 Amp induction-type motor for powerful performance • The left tool rest has a drill bit rest at the correct angle • Two piece tool rests are independently adjustable • Water tray to help keep workpiece cool while grinding • Work light with a separate on/off switch and flexible goose neck • Cast iron base for durability and reduced vibration • Full-size safety shields are clear and have thumb screws for easy adjustment • Includes 36 Grit Coarse Wheel, 60 Grit Wheel, safety shields, work light (bulb not included), and fully-adjustable tool rests • ETL Listed
Stock No.
Description
23-197
8 in. Variable Speed Grinder
For pricing please visit local dealer listings (pg. 28) 22
Drilling & Boring Machines 14-651 Mortiser • Easy and open access to drill chuck for bit changing • Adjustable fence and hold down • Gas-filled head-stabilizer • Height attachment adds 1 3/4 in. of additional capacity under head • Adjustable depth stop • Chuck key/hex wrench for bit and chisel changing • CSA Listed
Stock No.
Description
14-651
1/2 HP Mortiser
18-900L Drill Press • Full 6 in. Quill Stroke • Auto-Tensioning Belt Drive System • Micro-Adjustable Depth Stops and Independent Depth Scale allows the user to zero and set up for repetitive drilling • Fully Adjustable TWINLASER™projects a bright red crosshair on the work piece at the point of bit contact • Flexible LED Work Light • CSA Listed
Stock No.
Description
18-900L
18 in. Laser Drill Press
For pricing please visit local dealer listings (pg. 28) 23
Accessories
(Check website for availability)* Model # 17-001 17-002 17-003 17-004
Size 1/4 in. Professional Mortising Chisel and Bit Set 5/16 in. Professional Mortising Chisel and Bit Set 3/8 in. Professional Mortising Chisel and Bit Set 1/2 in. Professional Mortising Chisel and Bit Set
Model #
Size
20-619 20-622 20-621
6” Quick-Release Drill Press Vise 4” Quick-Release Drill Press Vise 4” Drill Press
Model #
Size
32-280 32-281
One 5mm (.197’) R.H. Brand Point Boring Bit One 5mm (.197’) L.H. Brand Point Boring Bit
17-005
17-924
4 PC. Professional Mortising Chisel and Bit Set
Mortising Attachment with Four Chisel and Bit Set
17-940
17-985
Drill Press Shield
25-Piece Sanding Drum Kit
18-901
Drill Press Fence
*For accessories not listed please visit www.deltamachinery.com
24
Dust Management Coming in 2015 50-723 Dust Collector • Standard 1 micron filtration bag keeps your shop safer and cleaner • 7” rubber wheels for smooth mobility • Precision spin-balanced alloy forged impeller • CSA Listed
Stock No.
Description
50-723
1 HP 750 CFM Dust Collector
50-767 Dust Collector • Standard 1 micron filtration bags keep your shop safer and cleaner • 7” rubber wheels for smooth mobility • Precision spin-balanced alloy forged impeller • CSA Listed
Stock No.
Description
50-767
1.5 HP 1500 CFM Dust Collector
50-873 Air Cleaner • 1/5 HP 115V single phase motor • Push Button/Remote Control switch also equipped with pull chain E-stop • 5 micron outer filter and 1 micron inner filter • Air turn over for room 20’x 20’x 8’= 22 times per hour • CSA Listed
Stock No.
Description
50-873
3 Speed Air Cleaner 540-1200 CFM
For pricing please visit local dealer listings (pg. 28) 25
Accessories
(Check website for availability)* Dust System Components Model #
Size
49-220 50-196 50-359 50-446 50-449 50-452 50-457 50-476 50-479 50-482 50-906
2-1/4” to 1-1/2” Reducer 4”-5” Quick Disconnect Dust Hood Dust Hood 4” Plastic Y Connector 4” Plastic Elbow 4” Plastic Splice 4” Blast Gate 5” x 4” Reducer 4”-2-1/4” Adapter Dust Collector Floor Sweep Attachment
Dust Collector Model #
Size
50-364 50-365 50-721 50-722
Accessory Plastic Bags Plastic Bag Disposable Bottom Bags 1 Micron Replacement Filter Bag
50-736
Dust Bag
50-737
Chip Bag
50-831
30 Micron Dust Bag
50-890
1 Micron Filter Bag
50-891
6 Mil Lower Collection Replacement Bag for 50-786/50-760
50-766
Canister for 50-723/50-767
Hoses Model #
Size
50-495 50-530 50-531
4” Steel Hose Clamp 4” DIA. x 10’ Hose 4” DIA. x 20’ Hose
Filters Model # 50-784 50-858 50-859 50-865
Size 1 Micron Pleated Canister Filter Pleated Outer Pre-Filter Three Pocket Inner Filter Electrostatic Filter
*For accessories not listed please visit www.deltamachinery.com
26
HOMECRAFT
NEW
H26-260L Miter Saw • Lightweight unit is easy to move from room to room or even from job to job • Works with virtually all miter saw stands • Spindle lock holds spindle securely while blade nut is loosened and removed • Capacity- Cuts nominal 4 x 4 and 2 x 6 at 90° and 2 x 6 at bevel setting, with one pass • UL Listed
This is a good little Miter saw for the money. Build quality is solid. Accuracy is great. Over all I am quite pleased by the value. Unless you are willing to jump many hundreds of dollars in price, this is as good as you are likely to need for most home, yard, etc. projects. Highly recommended. -Customer Review, Amazon.com
Bevel
Miter Scale
Laser Guide
Bevels Left- From 0°47°, cuts nominal 2 x 6 at full bevel
Miters to 45° degrees left and right stops at 0°, 15°, 22.5°, 30°, and 45°
Battery Operated with on/off switch. Makes aligning blade to workpiece more convenient and precise
Stock No.
Description
H26-260L
Homecraft 10 in. Miter Saw
For pricing please visit local dealer listings (pg. 28) 27
Nationwide Dealers Network Locations Indicated on Map Below
DELTA Corporate Office Local Dealers
For location of nearest dealer, please see www.deltamachinery.com/buy-now You may also call Delta Customer Care at 1-800-223-7278 for nearest location.
28
Here’s The Real Proof That
DELTA® Means Quality Look for the Delta® Seal of Quality (above) displayed on or in connection with DELTA®, HOMECRAFT® and BEISEMEYER® brand power equipment products as your guide to the duration of the Limited Warranty accompanying your product. For more information on our warranties please visit, http://www.deltamachinery.com/service-support/warranties.
2014 FALL-WINTER
FOR MORE INFORMATION VISIT DELTAMACHINERY.COM
OFFER AVAILABLE AT PARTICIPATING DEALERS ONLY WHILE SUPPLIES LAST. DELTA reserves the right to correct any pricing, product specifications or image discrepancies. ©2014 DELTA Power Equipment Corporation All Rights Reserved. Printed in the U.S.A.