Installation instruction Traditional roller blinds, system - „MINI“ Installation options The mini roller blind can be installed on the wall above the window opening or on the window frame.
Roller tube 17 mm Bracket width 22 mm Mechanism height 38 mm Mechanism depth 35 mm
Control The mini roller blind is moved up & down using a chain mechanism. The length of the chain is selected according to the height of the blind. Operation For roller blinds with a chain mechanism, pull one side of the chain loop to lift and the other to lower the blind.
INSTALLING First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely when fully extended. Look out for protruding window handles and tiles. STEP 1. Check All Hardware Be sure you have all components identified in the picture below.
1. Side brackets 2. Roller tube 3. Chain mechanism 4. Control chain
1
STEP 2. Select the method of mounting, that best suits your purpose (A or B). A.
B.
Mounting on the window frame. For installation in wood or plastic window frames, is recommend to use the metal screws.
Ceiling Mount. For installation on the wall or ceiling, is recommend to use the metal screws with plastic cover.
STEP 3. Drill pilot holes where you marked the screw holes. Use a screwdriver to attach the brackets to the window frame or wall using the screws provided.
2
STEP 4. After the first bracket is mounted, carefully position and attach the second bracket. Double check to be sure that it is level with the first bracket and that both are the correct distance apart.
3
STEP 5. Insert one mounting detail into its bracket .
STEP 6. Then put on another mounting detail on the end of the roller tube.
STEP 7. Hold the blind to the brackets with the fabric hanging from the back of the blind. Fit the tube end into its brackect.
4
STEP 8. Place other end of tube into position on the bracket.
5
STEP 9. Put the security details on the both brackets.
6
STEP 6. Make sure the blind tracks correctly by lowering it all the way down then back up again using the control chain.
7