All you ought to know about wood routers A router can be described as the most important tool woodworker ought to have since the device is used by experienced woodworkers to hollow-out areas on a pieces of wood. Older versions of wood routers were particularly used by staircase makers and pattern makers and they consisted of a wide wooden hand-plane that had a narrow blade. Though the olden version of the wood router has some advantages attached to it over the common power tools the wood router remains as one of the most favored wood work equipments by wood workers. Routing can be described as a high speed procedure of slicing, trimming, cutting, and shaping metal, wood, plastic and a host of other materials. Normally in cases that involve metal routing is done on soft metals like aluminum and tough non metals. Specially made wood routers are used for a variety of cuts, edging, and pattern making. In a few word routing can be explained as the process of shaping and producing finished edges and shapes. Some materials that are usually hard to shape like Kevlar, graphite and fiber glass can be shaped easily using various wood routers. Apart from shaping and finishing edges, cutaways, holes and contours can also be shaped to the desired shapes using a wood router.
There are various wood routers that are available in the market of routers today, a number of them have a handle with 2 knobs, and some have to be D held, while some have various speed controls. Some wood routers are designed with soft starting features meaning they start working slowly as they gain momentum slowly. This feature is common with wood routers that have large cutters. Holding on and turning a three horse router on is dangerous in a way, because the
wood router has a lot of motor power. Holding on the wood router with both hands is advisable for woodworkers who are old in the trade and beginners not only for your safety but for also those working with you. For wood routers that have a toggle type switch of ON/OFF it is very imperative that woodworkers check on their current status every time and confirming that the power switch is at the OFF position before powering a wood router on. Wood routers have different designs of handles that can be used depending on the type of work the wood router is expected to do, the controls make it easier to control the wood routers. A perfect example being when shaping the edges of a fine table top, most woodworkers prefer to use the D handle of wood router, with variable speeds, as this feature allows them better control thus the wood router minimizes burning of the wood. The uses of wood routers are countless. With the help of the numerous jigs and a variety of bits that are available on most wood routers, wood workers have the capability to produce mortises, dovetails, rabbets, raised paneled frames and doors, circle cutting and a lot more. A wood router can do anything that a wood worker wishes it to do like the shaping and cutting of wood however, templates, customized base plates, or jig tools that can help in guiding a wood router through a wood work are normally needed for such works. For More Information About Wood Routers Click Wood Router