Application Protocols
Laboratorios Innoaesthetics
INNOAESTHETICS
Innovation from experience
innoaesthetics Consists of a multidisciplinary team of professionals that combine technical knowledge with scientific support pharmacist-physician to offer a comprehensive response to the market with a unique stamp. Innoasthetics retrieves the dedication and devotion of the pharmaceutical formulation of the classical laboratory and implement it in manufacturing advanced galenic developments, making exclusive formulas that visibly improve the appearance of skin. Our goal: to purify dermocosmetics.
Index
ApPLICATION PROTOCOLS INNO-TDS Technique Facial Treatments
06-07
Facial Treatments
08-09
Technique Body Treatments
10-11
Body Treatments
12-13
Treatments with INNO-TDS Hyaluronidase (1.500u)
14-15
Technique and Treatment for Hair Loss
16-17
INNO-EXFO Treatments of Chemical Microexfoliation
20-23
Application Technique for INNO-EXFO Glyco Age or INNO-EXFO Mandelage
24-25
Application Technique for INNO-EXFO Bio C
26-27
Application Technique for INNO-EXFO Skin Recovery, INNO-EXFO T.C. Age or INNO-EXFO P by P
28-29
Application Technique for INNO-EXFO Lightening
30-31
Application Technique for INNO-EXFO Mg-TCA 35
32-33
Application Technique for INNO-EXFO Ultimate Eye Corrector Application Technique for INNO-EXFO Depitach-3
34-35 36-37
Application Protocols
INNO-TDS速
Transdermal Delivery System INNO-TDS. Formulations have been conceived for transdermal delivery by the skin care professional.
Active ingredients are released into the target area rapidly but in a gentle manner with no side effects.
They allow the various active ingredients to pass through the stratum corneum to reach the deeper layers of the skin.
TDS formulations are made without preservatives and are completely pure and sterile.
INNO-TDS
Technique Facial Treatments
1 cm of distance between points
Depth: 2 mm Dosage: 0.01 to 0.02 ml
technique point by point facial
Technique Micro papular facial Depth: 2 mm Dosage: 0,05 ml
06
2 cms of distance between points
2 cms of distance between points
TECHNIQUE OF MICRO PAPULAR NECK AND NECKLINE
LOWER EYELID TREATMENT Depth: 1 mm Dosage: 0,01 a 0,02 ml N O T E
2 cms of distance between points
All products can be used with napagge technique, which accompanies any of the other techniques or it can be used as single application technique.
07
Facial Treatments DEPTH OF APPLICATION
APPLICATION TECHNIQUE
DISTANCE BETWEEN POINTS
RESTRUCTURER
2 mm
Point by point Nappage
1 to 1,5 cms
HIALURONIC ACID
2 mm
Point by point
1 to 1,5 cms
Micro-papular
2 to 3 cms
҉
Product
Nappage
2 mm
҉
FIRMING
Point by point facial
1 to 1,5 cms
Micro-papular neck and neckline
2 to 3 cms
Nappage
MATRIX
2 mm
Point by point Nappage
1 to 1,5 cms
TIGF
2 mm
Point by point Nappage
1 to 1,5 cms
FILL UP
2 mm
Retrograde injection
10 mm
Micro-papular
2 to 3 cms
Nappage
REDOX
2 mm
Point by point Nappage
҉
N O T E
08
Items marked with this symbol can be applied alone or diluted with Inno-TDS Silicium (50%) or Inno-TDS Tracer.
1 to 1,5 cms
VOLUME PER INJECTION
TOTAL VOLUME INJECTED BY SESSION
0,01 to 0,02 ml
1,5 to 2 ml
0,01 to 0,02 ml
1,5 to 2 ml
0,05 ml
3 ml
FREQUENCY BETWEEN SESSIONS AND NUMBER FOR CYCLE
FOLLOW-UP
1 per week (3 sessions)
1 session every 15 days (3 sessions)
1 per week (3 sessions)
1 session every 15 days (3 sessions)
1 session every 15 days (4 sessions)
1 per 21 days (2 sessions)
1 per week (6 sessions)
1 session every 15 days (2 sessions)
1 per week (4 sessions)
1 session every 15 days (2 sessions)
0,01 to 0,02 ml
1,5 to 2 ml
0,05 ml
3 ml
0,01 to 0,02 ml
1,5 to 2 ml
1 session every 15 days (4 sessions)
1 per 21 days (2 sessions)
0,01 to 0,02 ml
1,5 to 2 ml
1 per week (4 sessions)
1 session every 15 days (3 to 4 sessions)
0,01 ml
3 ml
0,05 ml
3 ml
1 per week (3 sessions)
1 per 21 days (2 sessions)
1 session every 15 days (3 sessions)
1 per 21 days (2 sessions)
1 per week (4 sessions)
1 per 15 or 21 days (4 sessions)
0,01 to 0,02 ml
1,5 to 2 ml
09
INNO-TDS
Technique Body Treatments
10
Point to point 2 mm deep
1. 2.
Point to point 3-4 mm deep
Subcutaneous point by point, 8 to 10 mm deep
3. 4.
Micro papular
technique point by point corporal
1 of distance between points
2 to 3 cms of distance between points
Technique micro-papular corporal 11
Body Treatments
Product
DEPTH OF APPLICATION
APPLICATION TECHNIQUE
DISTANCE BETWEEN POINTS
Draining PPC
8 to 10 mm
Point by point subcutaneous
2 cms
SLIMMING
3 to 4 mm
Point by point
1 cm
Micro-papular
2 to 3 cms
Nappage
CYNARA PLUS
3 to 4 mm
Point by point
1 cm
Micro-papular
2 to 3 cms
Nappage
FIRMING
3 to 4 mm
Point by point
1 cm
Micro-papular
2 to 3 cms
Nappage
TRACER
3 to 4 mm
Point by point
1 cm
Micro-papular
2 to 3 cms
Nappage
VITAMIN COMPLEX
2 mm facial 3 mm corporal
12
Point by point Nappage
1 cm
VOLUME PER INJECTION
TOTAL VOLUME INJECTED BY SESSION
FREQUENCY BETWEEN SESSIONS AND NUMBER FOR CYCLE
0,1 to 0,2 ml
5 to 10 ml
1 per 21 to 30 days (4 to 6 sessions)
0,02 to 0,05 ml
5 to 10 ml
0,1 ml
5 to 10 ml
1 per week (8 sessions)
1 every 15 days (4 sessions)
0,02 to 0,05 ml
5 to 10 ml
1 per week (8 sessions)
1 every 15 days (4 sessions)
0,1 ml
5 to 10 ml
0,02 to 0,05 ml
5 to 10 ml
1 per week (8 sessions)
1 every 15 days (4 sessions)
0,1 ml
5 to 10 ml
0,02 to 0,05 ml
5 to 10 ml
1 per week (8 sessions)
1 every 15 days (4 sessions)
0,1 ml
5 to 10 ml
0,01 to 0,02 ml
1,5 to 2 ml facial
1 per week (4-8 sessions)
1 every 15 days (2 sessions)
FOLLOW-UP
5 ml corporal
13
Treatments with INNO-TDS Hyaluronidase (1.500u)
SITUATION TO BE TREATED
DILUTION
APPLICATION DEPTH
TECHNIQUE AND SEPARATION BETWEEN POINTS
As diffusing enzyme
5 ml of saline solution 1 ml = 300 U
2 to 4 mm
Lineal retrograde injection or like “fan”
Cellulite (fibrous)
10 ml of saline solution 1 ml = 150 U
4 to 6 mm
Point by point or lineal retrograde injection
Fibrosis post Liposuction
10 ml of saline solution 1 ml = 150 U
4 to 6 mm
Point by point or lineal retrograde injection
Destruction of hyaluronic acid fillers
5 ml of saline solution 1 ml = 300 U
It depends on the depth at which the product is applied
Point by point or lineal retrograde injection
14
DOSIS PER POINT OR AREA
TOTAL DOSIS
FREQUENCY AND NUMBER OF SESSIONES
25 to 75 U (in this case diluted with desired active ingredient)
150 to 300 U
It depends on the treatment you want to set Local anesthetic Diffusion once
750 units distributed symmetrically
1.500 U
From 600 to 1,500 units, depending on the area to be treated
1.200 to 3.000 U
Maximum 3 sessions every 30 to 45 days
From 75 to 150 units depending on the volume and problem to be treated
150 to 600 U
1 application is enough
Maximum 3 sessions every 30 to 45 days
15
Technique and Treatment for Hair Loss
product
APPLICATION DEPTH
APPLICATION TECHNIQUE
DISTANCE BETWEEN POINTS
hair loss control
2 to 3 mm
Point by point
2 cms
16
VOLUME PER INJECTION
TOTAL VOLUME INJECTED BY SESSION
FREQUENCY BETWEEN SESSIONS AND NUMBER FOR CYCLE
FOLLOW-UP
0,01 to 0,02 ml
1 to 2 ml
1 per week (8 sessions)
1 session every 15 days (2 sessions)
2 cms of distance between points
TECHINIQUE POINT BY POINT
17
Application Protocols
INNO-EXFO速
Controlled Chemical Microexfoliation INNO-EXFO. Offers skin care professionals a complete system of chemical peels that combine a variety of acids. Eight different peels address individual skin pathologies and skincare needs. The active ingredients of each peel will address both upper and middle layers of the skin in
order to achieve the optimum result; renewed, revitalised skin. INNO-EXFO improves the appearance of the skin, minimizes signs of ageing, brightens, reduces hyper pigmentation and various other skin abnormalities.
Treatments of Chemical Microexfoliation
PRODUCT
INDICATIONS
QUANTITY TO USE FOR SESSION
APPLICATION TECNIQUE
glyco age
Open Pores Xerosis Previous to other peeling
2 ml facial 4 ml face, neck and neckline
With a brush in a homogeneous layer on the skin
BIO C
Photoaging prevention Glow effect Sensitive skin
Step 1: 1,5 ml facial 3 ml face, neck and neckline Step 2: 3 to 5 ml
Step 1: With a brush in a homogeneous layer on the skin Step 2: apply on the skin, massage until full penetration
MANDALAGE
Dermatoheliosis I Mild inflammatory acné Mild hypermelanosis
2 ml facial 4 ml face, neck and neckline
With a brush in a homogeneous layer on the skin
SKIN RECOVERY
Oily Skin regulation Comedogenic acne Foliculitis barbae Red stretch marks
3 ml facial 6 ml face, neck and neckline
With friction and a cotton swab, brush from 1 to 4 layers depending on the deep desired
Mg-TCA 35
Elastosis of the face, neck and décolleté. Slack and atrophic skin. Co-adjuvant for hyperpigmentation treatments. General cutaneous biorevitalization.
1 ml facial 2 ml face, neck and neckline
Massage vigorously with a gloved hand vinyl glove, never use latex. Repeat from 1 - 3 times.
20
EXPOSURE TIME
Neutralize (INNO-EXFO Neutralizer)
FREQUENCY AND NUMBER OF SESSIONS
FOLLOW-UP
3 to 6 minutes
Yes
1 each week (4 to 6 sessions)
1 each 15 days (2 to 4 sessions)
5 to 10 minutes
Yes
1 each week (5 sessions)
1 each 15 days (2 sessions)
5 to 10 minutes
Yes
1 each week (4 to 6 sessions)
1 each 15 days (2 to 4 sessions)
Its penetration does not depend on the time but it depends on the number of layers
No
1 each 10 days (3 to 4 sessions)
1 each 21 days (2 sessions)
Its penetration does not depend on the time but it depends on the number of layers
No
1 each 10 days (3 to 5 sessions)
Repeat session by the 10th month
21
Treatments of Chemical Microexfoliation
PRODUCT
INDICATIONS
QUANTITY TO USE FOR SESSION
APPLICATION TECNIQUE
lightening
Moderate hypermelanosis Dermatoheliosis associated to pigmentations Moderate inflammatory acne
5 grs or more depending on the are to be treated
With a brush in a homogeneous layer on the skin
T.C. AGE
Dermatoheliosis II White stretch marks Acne scars
3 ml facial 6 ml face, neck and neckline
With friction and a cotton swab, apply from 1 to 4 layers depending on the deep desired
Lentigines Bar code in phototypes I to III Simple queratosis Actinic queratosis
0,1 to 1 ml depending on the number of lesions to be trated
With friction and a cotton swab
Severe hyperpigmentation Pigmented scars Severe photoaging Cutaneous elastosis
Step 1: 2 ml Step 2: 2 ml Step 3: 3 ml
Step 1: Apply an even layer with a brush Step 2: Apply from 2 to 3 layers, using cotton swabs, rubbing and pressing down on the treated area Step 3: Apply with the help of cotton swabs
Treatment of Vitamin A + PHA to repair the eye area Revitalize and reduce fine wrinkles
Step 1: 2 gr Step 2: 1 gr
Step 1: Take 2 gr. of the Step 1, apply with a brush, spread 1 gr. in the area of the eyelids. On the top, apply in the eyelid area , at the bottom, leave 2 mm. from the edge of the lower eyelid cilia. Clean with water. Paso 2: Apply one gram of Step 2 in the treated area massage until absorption.
P by P
Depitach-3
Ultimate Eye Corrector
22
EXPOSURE TIME
Neutralize (INNO-EXFO Neutralizer)
FREQUENCY AND NUMBER OF SESSIONS
FOLLOW-UP
15 minutes to 2 hours
No
1 each 21 days (3 sessions)
2 cycles per year (each 6 months)
Its penetration does not depend on the time but it depends on the number of layers
No
1 each 15 days (3 sessions)
2 cycles per year (each 6 months)
One layer is applied by points until frosting appears
No
1 each 45 to 60 days if necessary
None
Step 1: from 3 to 5 minutes Step 2: not depends on time Step 3: not depends on time, between 3 to 5 layers
No
Maximum 3
2 cycles per year (each 6 months)
2 minutes inicially, raising 1 minute each minute until the fifth week
No
5 sessions 1 per week
2 cycles per year (each 6 months)
23
INNO-EXFO
Application Technique for INNO-EXFO Glyco Age or INNO-EXFO Mandelage
1.
3.
24
Cleanse the area with INNO-DERMA Cleanser.
Take the quantity of product to be used and put it in a small container.
Degrease the skin with INNO-EXFO Degreasing Solution.
2.
With the help of a brush apply a homogeneous layer on the skin; monitor the time to determine the procedure finalization.
4.
5.
Spray with INNO-EXFO Neutralizer. Wash with water.
7.
Apply INNO-DERMA Skin Repair and leave for 5 minutes or apply INNO-EXFO Refresh Mask.
6.
Finally apply INNO-DERMA Coverage UVP 50+ or INNO-DERMA Sun Block UVP+ that corresponds.
25
INNO-EXFO
Application Technique for INNO-EXFO Bio C
1.
Cleanse the area with INNO-DERMA Cleanser.
Take the quantity of INNO-EXFO Bio C to be used and put it in a small container.
Degrease the skin with INNO-EXFO Degreasing Solution.
With the help of a brush apply a homogeneous layer on the skin, monitor the time and leave to act for 5 to 10 minutes. Wash with water.
3. 4.
26
2.
5.
Push the botton to dilute and mix the Vitamin C. Once applied, place the droppper for an easy application. Do not remove after application.
+
6.
Finally apply INNO-DERMA Coverage UVP 50+ or INNO-DERMA Sun Block UVP+ that corresponds.
27
INNO-EXFO
Application Technique for INNO-EXFO Skin Recovery, INNO-EXFO T.C. Age or INNO-EXFO P by P
1.
3.
28
Cleanse the area with INNO-DERMA Cleanser.
Degrease the skin with INNO-DERMA Degreasing Solution.
2.
Take the quantity of product to be used and put it in a small container.
4.
With the help of cotton swabs apply point by point on injuries, the requiered quantity and let it act until the frosting appears.
6.
Apply INNO-DERMA Skin Repair and massage until total absorption.
5.
Finally apply INNO-DERMA Coverage UVP 50+ or INNO-DERMA Sun Block UVP+ that corresponds.
29
INNO-EXFO
Application Technique for INNO-EXFO Lightening
1.
Cleanse the area with INNO-DERMA Cleanser.
Degrease the skin with INNO-DERMA Degreasing Solution.
2.
+ Extract a portion of INNO-EXFO Lightening and place it in a container with the help of a spatula.
3.
30
With the help of a brush, apply a uniform layer over the skin. A second layer could be applied in required areas.
5. Leave on for a period of 15 minutes up to 2 hours.
7.
6. Wash the face with INNO-DERMA Soft Cleanser.
Finally apply INNO-DERMA Coverage UVP 50+ or INNO-DERMA Sun Block UVP+ that corresponds.
31
Application Technique for INNO-EXFO Mg-TCA 35
1.
3.
32
Cleanse the area with INNO-DERMA Cleanser.
Degrease the skin with INNO-EXFO Degreasing Solution.
2.
Take the quantity of product to be used and put it in a small container.
4.
Apply 2-3 layers of INNO-EXFO Mg-TCA 35. Massaging in ascending and energetic form until completely absorption.
6.
Apply INNO-DERMA Skin Repair massage until total absorption.
5.
Finally apply INNO-DERMA Coverage UVP 50+ or INNO-DERMA Sun Block UVP+ that corresponds.
33
Application Technique for INNO-EXFO Ultimate Eye Corrector
1.
Cleanse the area with INNO-DERMA Cleanser.
Degrease the skin with INNO-EXFO Degreasing Solution.
2.
+ Take 1,5-2gr. approximately ok Inno-Exfo Ultimate Eye Corrector Step 1 with a spatula.
3.
34
With a brush apply a layer on the eyelids respecting 2mm near the ciliary edge and upper eyelid.
5.
Clean with the help of INNO-DERMA Soft or Deep Cleanser and abundant water.
Apply Inno-Exfo Ultimate Eye Corrector Step 2 and massage until penetration.
6.
INNO-EXFO Lightening Step 1 it’s handled by protocol specific time.
7.
Finally apply INNO-DERMA Coverage UVP 50+ or INNO-DERMA Sun Block UVP+ that corresponds.
35
Application Technique for INNO-EXFO DEPITACH-3
1.
3.
36
Cleanse the area with INNO-DERMA Cleanser.
Degrease the skin with INNO-EXFO Degreasing Solution.
2.
INNO-DERMA Depitach-3 will be applied in three steps continously during 2 cycles per year (each 6 months) in a maximun of 3 sessions.
+
+ Step 2
Step 1 Take the quantity of product to be used and put it in a small container. Apply an even layer with a brush over the skin and leave on action from 3 to 5 minutes.
Step 3
Apply from 2 - 3 layers of the product using cotton swabs, rubbing and pressing down on the treated area.
Apply from 2 - 3 layers and leave on action from 30 to 60 minutes.
37
4.
5.
38
Apply INNO-DERMA Skin Repair massage until total absorption.
Finally apply INNO-DERMA Coverage UVP 50+ or INNO-DERMA Sun Block UVP+ that corresponds.
LABORATORIO INNOAESTHETICS Pont Reixat, 3 08960 Sant Just Desvern Barcelona - SPAIN www.innoaesthetics.com