Snell Design by Ares Concept
67
Long Lasting Protection Compact and solid aluminium structure
Poliurethane resin filling to seal electrical components
DC power supply Cables
Polyurethane Resin
Electronics/components
Cover
Lens
Sylicon permanent fastening
Heatsink: reduces and keep the TJ of the LED to 60째/70째
Led position: under the glass cover Aluminium body designed for better heat dissipation
Frontal view of Led PCB
Gluing of the LED module through termal paste
Polyurethane resin protects electronic components from the deterioration of water, air, etc
Extra PCBs: PWM Voltage Current converter
PCBs are placed inside the aluminium body before the resin treatment
67
Snell
ü Configuration: die-cast aluminium structure . EN AB-47100 (low copper content).
Dimensions
2.95"
ü Recessed luminaire with lateral emission for outdoor installation in wall or pavement.
ü Double layer coating for high resistance to corrosion: chemical conversion coating on the aluminium surface followed by a first layer of epoxy powder and a second finishing layer of polyester powder.
3.46"
0.8"
ü Moulded silicone gasket and 360° emitting glass lens fixed with silicone glue ü Protection rating: IP67 ü Class II. ü Installation: Snell is equipped with a highly efficient resin-coated DC/ DC switching converter that guarantees the right power supply to the LED module, removes electromagnetic interference and allows parallel wiring. Feeding tension must be included between 12 and 24V d.c., any other supply will irretrievably damage the LED module. Snell is protected against polarity reversal (the luminaire does not switch on) and is equipped with a piece of cable for an easy-to-make connection (please provide effective insulation on the connection). Installation requires a dedicated box (to be ordered separately) to be installed flush with the surface. For ground installation it is important to provide a proper gravel layer or drain system (>200mm) to ensure good drainage and to avoid water stagnation.
Ø 2.48"
ü Warning! Use IP68 connectors to avoid water ingress from the cable.
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Installation requires a 7.8" water drainage layer (gravel)
Do not install in hollow areas.
kg
36 lbf
The fitting is equipped with 1 cable input.
Static load: 4409lbs walk over
Remote device required
Drive over
Protection against impact.
5kN
IK 07 - 2,00 joule
Recessed wall fitting
Pre-wired with approx 9.84" of cable.
Check that diffuser’s temperature “T max °C” (tested at 77°F (25°C)) complies with your local regulation
24Vd.c.
Snell
LED / Unidirectional
U1016801 COOL WHITE LED 3W/24V d.c. Total power 3,4W LED lm 178 ≠ FIXT lm 14
Lux
1x
4
120° 6000 90°
Remote electronic power supply to be ordered
5
2
1
2 0
60°
-2 cd / 1000 lm
C0 / C180
C90 / C270
-8
-4
0 m
4
-4
1
2
U1017701 NATURAL WHITE LED 3W/ 24V d.c. Total power 3,4W LED lm 152 ≠ FIXT lm 12
1x
Remote electronic power supply to be ordered
U1016401 WARM WHITE LED 3W/24Vd.c. Total power 3,4W LED lm 152 ≠ FIXT lm 12
1x
Remote electronic power supply to be ordered
Snell
LED / Bidirectional
U1016802 COOL WHITE LED 3W/24Vd.c. Total power 3,4W LED lm 178 ≠ FIXT lm 2x15
Lux
1x
2400
90°
Remote electronic power supply to be ordered
4
120° 5 3
0
60°
-2 cd / 1000 lm
C0 / C180
C90 / C270
-8
-4
0 m
4
-4
U10117702 NATURAL WHITE LED 3W/ 24V d.c. Total power 3,4W LED lm 152 ≠ FIXT lm 2x13
1x
Remote electronic power supply to be ordered
U1016402 WARM WHITE LED 3W/24Vd.c. Total power 3,4W LED lm 152 ≠ FIXT lm 2x13
1x
Remote electronic power supply to be ordered
Snell
LED / Omnidirectional
U1016804 COOL WHITE LED 3W/24Vd.c. Total power 3,4W LED lm 178 ≠ FIXT lm 4x15
Lux
1x
1200
90°
Remote electronic power supply to be ordered
5
U10117704 1x
Remote electronic power supply to be ordered
U1016404
Remote electronic power supply to be ordered
1
1x
2 0 -2
C0 / C180
WARM WHITE LED 3W/24Vd.c. Total power 3,4W LED lm 152 ≠ FIXT lm 2x13
2
60° cd / 1000 lm
NATURAL WHITE LED 3W/24V d.c. Total power 3,4W LED lm 152 ≠ FIXT lm 2x13
4
120°
C90 / C270
-8
-4
0 m
4
-4
Accessories: Snell
U104 BOX FOR INSTALLATION
4.72" x 4.72" x H 4.33"
4.33"
2.95"
4.72"
24vDC Power Supplies PPLT00155
1-7 fixtures
90-265vAC TO 24vDC 30W Class 2
PPLT00156
1-10 fixtures
90-265vAC TO 24vDC 45W Class 2
PPLT00157
1-14 fixtures
90-265vAC TO 24vDC 60W Class 2
PPLT00158
1-23 fixtures
90-265vAC TO 24vDC 100W Class 2
Other power supply options available on request.