vega, new vega trixie
IP67 in grade for halogen, HID, CFL and LED listed wet label.
IP65 led wall mount CSA listed wet label
VEG 10/11
8
VEGA
Ares concept
Vega and New Vega are two round recessed lights with a diecast aluminium body and a series of die-cast aluminium coverings allowing glare free light emission in different directions (one, two or four beams).Vega (low profile structure) and New Vega are, therefore, particularly useful to border walk- and pathways. listed wet label. Rated IP67. LED versions comply with LM79 and LM80
Vega Description Recessed round luminaire with lateral light emission for outdoor installation on ground. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure with coated die-cast aluminium (five colours available) finish cap, moulded silicone gasket and moulded tempered transparent glass. Vega is capable of withstanding light vehicular traffic. Versions Available Light emission: - unidirectional: one 90° lateral window - bidirectional: two 90° opposite lateral windows - omnidirectional: four 45° cross lateral windows Diffuser: - transparent glass (VT) Light Sources 1W/120V led module for each window (cool-white 6000 K, warm-white 3000 K, and blue 475nm)* * Integrated power supply
Technical Features CSA listed wet label. Protection Rating: IP67 LED version complies with LM79 and LM80 Installation Fixture supplied with 3’ of SJOW cord and waterproof wire nuts. Wiring connection made in recessed box with conduit or UF cable for outdoor use. It is important to provide a >12” gravel layer or a drain system (if the box is installed on a concrete surface) to ensure good drainage and to avoid water stagnation. Accessory on request: polypropylene box for installation
Maximum load (vehicular traffic): 4400 lbs 6mph
Protection against impact. IK 09 - 10,00 joule
Colours Available
.2 aluminium
.3 anthracite
.9 rust-red
.4 black
1.3” 4.05”
7.08”
6.3”
5.31”
5
An efficient drainage of water with a layer of gravel should be forseen - 12”.
The fitting is equipped with 1 cable input
Dimensions Round frame: Ø 7.08” Convexity: 1.3” Recessing depth (including box for installation): 80mm
.1 white
The fitting must not be installed in hollow areas.
VEGA UNIDIRECTIONAL 50
20
10
90°
1 COOL WHITE LED 1x1W/120V
60°
0
30°
cd / 1000 lm
1X
Electronic power supply included
5 10
40
0°
U058901
0.5
1
40 30 20
1XC00 / C1801X
C90 / C270
0
0.5
1
1.5
0.5
m
T 45°
U058801
1 WARM WHITE LED 1x1W/120V1X Electronic power supply included
1X
1X
T 45°
U059001
1 BLUE LED 1x1W/120V
1X
Electronic power supply included
1X
1X
T 45°
BIDIRECTIONAL 0.5 1 50 40 30 20 10
U0511802
90° 60°
2 COOL WHITE LED 2x1W/120V
2XC00 / C1802X
T 45°
U0511902
2 WARM WHITE LED 2x1W/120V2X Electronic power supply included
2X
2X
T 45°
U0512002
2X
Electronic power supply included
2X
2X
T 45°
OMNIDIRECTIONAL
U0512904
4 COOL WHITE LED 4x1W/120V
4X
Electronic power supply included
4X
T 45°
U0513004
4 WARM WHITE LED 4x1W/120V4X Electronic power supply included
4X
T 45°
U0513104
4 BLUE LED 4x1W/120V
4X
Electronic power supply included
U15 6.5”
3.15”
0.86”
T 45°
7.08”
6
BOX FOR INSTALLATION Ø 7.08”x 3.15”H
4X
4X
4X
4X
5 0
40
0°
30°
cd / 1000 lm
2X
Electronic power supply included
2 BLUE LED 2x1W/120V
10 20
C90 / C270
1
0.5
0 m
0.5
0.5
New Vega Description Recessed round luminaire with lateral light emission for outdoor installation on ground. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure with coated die-cast aluminium (five colours available) finish cap, moulded silicone gasket and moulded tempered transparent glass. New Vega is capable of withstanding light vehicular traffic. Versions Available Light emission: - unidirectional: one 90° lateral window - bidirectional: two 90° opposite lateral windows - omnidirectional: four 45° cross lateral windows Diffuser: - transparent glass (VT) Light Sources All versions: 100W QT32 E27 halogen lamp 18W TC-T Gx24d-2 or 18W TC-TEL Gx24q-2 compact fluorescent lamp 20W HIT G8,5 metal halide lamp (electronic ballast) Dimensions Round frame: Ø 7.08” Convexity: 1.3” Recessing depth (including box for installation): 9.85” Technical Features CSa listed wet label. Protection Rating: IP67
Colours Available
.2 aluminium
.3 anthracite
.9 rust-red
.4 black
7.8”
9.4”
1.3”
6.3”
5.12”
7
An efficient drainage of water with a layer of gravel should be forseen - 15.75”.
The fitting is equipped with 1 cable input
Maximum load (vehicular traffic): 44oolbs 6mph
Installation Fixture supplied with 3’ of SJOW cord and waterproof wire nuts. Wiring connection made in recessed box with conduit or UF cable for outdoor use . It is important to provide a >15.75” gravel layer or a drain system (if the box is installed on a concrete surface) to ensure good drainage and to avoid water stagnation. Accessory on request: polypropylene box for installation
.1 white
The fitting must not be installed in hollow areas.
Protection against impact. IK 09 - 10,00 joule
UNIDIRECTIONAL
U050101
QT 32 100W Med. Base
IAA/D45 FCH T-R HRGI QR32 CBC 35 FSM TC-T FSMH TC-TEL HSG QT 12 HSGT QT32 VEGA IAA/A45 FSD TCPAR NEW HRGS PAR 16 FBT TC-TSE HSGT QT32 HDG QT-DE12 IAA/A60-A65 FSD TC-L HSG QT 9 HDGQT-DE12 QT-DE1275mm HDG IRR/R63 FSQ TD-D HSG QT 12 FSQ TC-DEL FSD TC-F HDG 75mm HE QT QT-DE12 18 HRPAR/PAR30S FSM TC-T HSGT QT32 FSMH TC-TEL MD HIT-DE HE QT FCH T-R18 32 HMG/QR11 FBT TC-TSE HDG QT-DE12 MT HIT G12 FCHTC T-R FSD HRGI QR32 CBC 35 HDG QT-DE12 75mm MT HIT G8,5 FSDTC-L TCPAR PAR 16 FSD HRGS FSD TC-F HE QT 18 MR HI-PAR 20 FSDTD-D TC-L FSQ HSG QT 32 9 FSQ TC-DEL MD HIT-DE FCH T-R MR HI-PAR 30L FSQTC-T TD-D FSQ TC-DEL FSM TC-TEL HSG QTG12 12 FSMH MT HIT FSD TC QE HME FSM TC-T FSMH TC-TEL FBT TC-TSE HSGT QT32 MT HIT G8,5 FSD TC-L FD/T5 FBT TC-TSE HDG QT-DE12 MR HI-PAR 20 FSQ TD-D FSQ TC-DEL 0.5
25
1
20
5
15
10
5
90° 60°
30°
cd / 1000 lm
C00 / C180
U058501
TC-TEL 18W Gx24 q-2 Electronic ballast
C90 / C270
12
1
0
30°
C90 / C270
60
1.5
0.5
0
30°
C90 / C270
0
0.5
1
1.5
0.5
m
0.5
25 20 15 10 5
1
5 10
0
0°
90° 60°
30°
cd / 1000 lm
1
0.5
0
0.5
FSD TC-F HDG QT-DE12 75mm MR HI-PAR 30L FSM TC-T FSMH TC-TEL FSDHIT-DE TC-F MD HE QT 18 QE HME FBT TC-TSE MDHIT HIT-DE MT FCH T-RG12 32 FD/T5
C00 / C180
Electronic ballast
1
m
0°
cd / 1000 lm
TC-TEL 18W Gx24 q-2
0.5
5
40
C00 / C180
U058502
0
0.5
90° 60°
QT 32 100W MED. Base
0.5
1
20
BIDIRECTIONAL
1.5
0°
cd / 1000 lm
U050102
1
m
8
C00 / C180
Electronic ballast
0.5
0.5
90° 60°
HIT 20W G8,5
0
16
4
U056601
0
10
0°
C90 / C270
0.5
m
16 12
0.5
1
8 4
0
0°
90° 60°
30°
cd / 1000 lm
C00 / C180
U056602
HIT 20W G8,5 Electronic ballast
C90 / C270
1
0.5
0
0.5
0.5
m
MTHIT HIT G12 MT FSD TCG8,5 FSD TC-F MTHI-PAR HIT MR 20 FSD TC-LG8,5 MD HIT-DE MRHI-PAR HI-PAR 20 MR 30L FSQ TD-D MT HIT G12 FSQ TC-DEL MRHME HI-PAR 30L QE FSM TC-T MT HIT G8,5FSMH TC-TEL QE HME FD/T5 FBT TC-TSE20 MR HI-PAR FD/T5 MR HI-PAR 30L
0.5
60
1
40
5
20
0
0°
90° 60°
30°
cd / 1000 lm
C00 / C180
C90 / C270
1
0.5
FSDHME TC-F QE MD HIT-DE FD/T5 MT HIT G12 MT HIT G8,5 MR HI-PAR 20 MR HI-PAR 30L QE HME 8
FD/T5
0
m
0.5
0.5
NEW VEGA OMNIDIRECTIONAL
U050104
QT 32 100W Med. Base
FCH T-R 32 FSM TC-T FSMH TC-TEL HSGTC QT 12 FSD FBT TC-TSE HSGT QT32 FSD TC-L 8
0.5
6
1
4 2
HDGTD-D QT-DE12 FSQ FSQ TC-DEL FSD TC-F HDGTC-T QT-DE12 75mm FSM FSMH TC-TEL MD HIT-DE HE QT 18 FBT TC-TSE MT HIT G12 FCH T-R 32 MT HIT G8,5 FSDTC-F TC FSD MR HI-PAR 20 FSDHIT-DE TC-L MD MR HI-PAR 30L FSQHIT TD-D MT G12 FSQ TC-DEL QE HME FSMHIT TC-T MT G8,5FSMH TC-TEL FD/T5 FBTHI-PAR TC-TSE20 MR
0
0°
90° 60°
30°
cd / 1000 lm
C00 / C180
U058504
TC-TEL 18W Gx24 q-2 Electronic ballast
C90 / C270
1
0.5
0
0.5
0.5
m
8
0.5
6
1
4 2
0
0°
90° 60°
30°
cd / 1000 lm
C00 / C180
U056604
HIT 20W G8,5 Electronic ballast
C90 / C270
1
0.5
0
0.5
0.5
m
0.5
12
1
8
4
0
0°
90° 60°
30°
cd / 1000 lm
C00 / C180
U58 9.85”
0.5”
6.58”
5.5”
BOX FOR INSTALLATION Ø 6.58” x 9.85” H
C90 / C270
1
0.5
0
0.5
0.5
m
MR HI-PAR 30L FSDHME TC-F QE MD HIT-DE FD/T5 MT HIT G12 MT HIT G8,5 MR HI-PAR 20 MR HI-PAR 30L QE HME FD/T5
9
11
TRIXIE U1029400
1 COOL WHITE LED 1x3,5W/24V d.c
1X
1X
1X
U1029500
1 WARM WHITE LED 1x3,5W/24V 1X d.c
1X
1X
Remote 120v input-24V DC output power supplies *PPLT00090 120V AC-24V DC 60W *PPLT00086 120V AC-24V DC 100W *PPLT00087 120V AC-24V DC 300W
6.5”L x 3.85”W x 1.5”H 8”L x 3.85”W x 1.5”H 8.5”L x 4.75”W x2”H
PPLT00093 120V-277V AC-24V DC 100W
9.5”L x 1.7”W x 1.2”H
Note: 300W power supply must be wired with individual fused legs not to exceed 100W to comply with Class II wiring. Power supplies can be mounted up to 100 feet away as long as the contractor has accounted for proper wire size for wattage and voltage drop.
*The 120v power supplies are field adjustable for outputs from 21.6V to 26.4V
79 Trenton Avenue • Frenchtown, NJ 08825 • Tel: (908) 996-7710 • Fax: (908) 996-7042 www.designplan.com The products shown in this catalog are designed and engineered by Willy Meyer + Sohn. They are assembled under license by Designplan Lighting, Inc.